[OpenWrt-Devel] [PATCH 4/6] ramips: Add device tree for JCG JHR-N926R

[reinhard at m4x.de]

From: Reinhard Max <reinhard at m4x.de>

Add a device tree for JCG JHR-N825R

This router is based on a RT3052 and has 4MB of CFI flash and 32MB of
SDRAM. As a special feature, it comes with a two digit seven segment
display that is connected to a pair of daisy-chained 74164 shift
registers that can be controlled via GPIOs.

For details, see https://wikidevi.com/wiki/JCG_JHR-N825R .

Signed-off-by: Reinhard Max <reinhard at m4x.de>
Reviewed-by: Torsten Duwe <duwe at lst.de>
---
 target/linux/ramips/dts/JHR-N926R.dts | 127 ++++++++++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)
 create mode 100644 target/linux/ramips/dts/JHR-N926R.dts

diff --git a/target/linux/ramips/dts/JHR-N926R.dts b/target/linux/ramips/dts/JHR-N926R.dts
new file mode 100644
index 0000000..f4dfd10
--- /dev/null
+++ b/target/linux/ramips/dts/JHR-N926R.dts
@@ -0,0 +1,127 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	compatible = "JHR-N926R", "ralink,rt3052-soc";
+	model = "JCG JHR-N926R";
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	cfi at 1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition at 0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition at 30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition at 40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition at 50000 {
+			label = "firmware";
+			reg = <0x50000 0x3b0000>;
+		};
+	};
+
+	ethernet at 10100000 {
+		mtd-mac-address = <&factory 0x2e>;
+	};
+
+	esw at 10110000 {
+		mediatek,portmap = <0x3e>;
+	};
+
+	wmac at 10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wlan1 {
+			label = "jhr-n926r:red:wlan";
+			gpios = <&gpio0 20 1>;
+		};
+
+		wlan2 {
+			label = "jhr-n926r:yellow:wlan";
+			gpios = <&gpio0 19 1>;
+		};
+
+		wlan3 {
+			label = "jhr-n926r:green:wlan";
+			gpios = <&gpio0 17 1>;
+		};
+
+		system {
+			label = "jhr-n926r:blue:system";
+			gpios = <&gpio0 13 1>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		display_data {
+			gpio-export,name = "display_data";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 7 1>;
+		};
+
+		display_clock {
+			gpio-export,name = "display_clock";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 8 0>;
+		};
+
+		display_blank {
+			gpio-export,name = "display_blank";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 11 0>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset_wps {
+			label = "reset_wps";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+
+		wlan {
+			label = "wlan";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x100>;
+		};
+	};
+};
-- 
2.6.2
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel