[OpenWrt-Devel] [PATCH] Add support for Netgear D7800

Tathagata Das tathagata at alumnux.com
Tue Jan 19 03:26:39 EST 2016


Hi John,

I sent the patch last time using git command and I even received an email
from OpenWRT on 12th January 2016.

Regards,
Tathagata


-----Original Message-----
From: John Crispin [mailto:blogic at openwrt.org] 
Sent: 19 January 2016 13:45
To: Tathagata Das; openwrt-devel at lists.openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH] Add support for Netgear D7800

same as before, we are waiting on you to send a version that applies.


patchwork 566597
--2016-01-17 06:23:22--  http://patchwork.ozlabs.org/patch/566597/mbox/
Resolving patchwork.ozlabs.org (patchwork.ozlabs.org)... 103.22.144.67
Connecting to patchwork.ozlabs.org
(patchwork.ozlabs.org)|103.22.144.67|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/plain]
Saving to: `566597.patch'

    [ <=>
                   ] 12,864      --.-K/s   in 0s

2016-01-17 06:23:24 (115 MB/s) - `566597.patch' saved [12864]

Applying: Add support for Netgear D7800
Using index info to reconstruct a base tree...
<stdin>:109: space before tab in indent.
 	qcom-ipq8064-ap148.dtb \
<stdin>:110: space before tab in indent.
 	qcom-ipq8064-db149.dtb \
<stdin>:111: space before tab in indent.
 	qcom-ipq8064-r7500.dtb \
<stdin>:113: space before tab in indent.
 	qcom-msm8660-surf.dtb \
<stdin>:114: space before tab in indent.
 	qcom-msm8960-cdp.dtb \
warning: squelched 1 whitespace error
warning: 6 lines add whitespace errors.
Falling back to patching base and 3-way merge...
Auto-merging target/linux/ipq806x/image/Makefile
Auto-merging target/linux/ipq806x/base-files/lib/upgrade/platform.sh
CONFLICT (content): Merge conflict in
target/linux/ipq806x/base-files/lib/upgrade/platform.sh
Failed to merge in the changes.
Patch failed at 0001 Add support for Netgear D7800 When you have resolved
this problem run "git am --resolved".
If you would prefer to skip this patch, instead run "git am --skip".
To restore the original branch and stop patching run "git am --abort".
Unstaged changes after reset:
M	target/linux/ipq806x/base-files/etc/board.d/01_leds
M	target/linux/ipq806x/base-files/etc/board.d/02_network
M	target/linux/ipq806x/base-files/lib/ipq806x.sh
M	target/linux/ipq806x/base-files/lib/upgrade/platform.sh
M	target/linux/ipq806x/image/Makefile
M	target/linux/ipq806x/profiles/netgear.mk
applying 566597 FAILED


patchwork 569813
--2016-01-17 06:22:13--  http://patchwork.ozlabs.org/patch/569813/mbox/
Resolving patchwork.ozlabs.org (patchwork.ozlabs.org)... 103.22.144.67
Connecting to patchwork.ozlabs.org
(patchwork.ozlabs.org)|103.22.144.67|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/plain]
Saving to: `569813.patch'

    [ <=>
                   ] 13,088      --.-K/s   in 0s

2016-01-17 06:22:14 (172 MB/s) - `569813.patch' saved [13088]

Applying: Add support for Netgear D7800
fatal: patch fragment without header at line 130: @@ -0,0 +1,381 @@
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001 Add support for Netgear D7800 When you have resolved
this problem run "git am --resolved".
If you would prefer to skip this patch, instead run "git am --skip".
To restore the original branch and stop patching run "git am --abort".
applying 569813 FAILED




On 19/01/2016 07:19, Tathagata Das wrote:
> Any update about the patch?
> 
> Regards,
> Tathagata
> 
> 
> -----Original Message-----
> From: Tathagata Das [mailto:tathagata at alumnux.com]
> Sent: 12 January 2016 20:47
> To: openwrt-devel at lists.openwrt.org
> Cc: Tathagata Das
> Subject: [PATCH] Add support for Netgear D7800
> 
> Signed-off-by: Tathagata Das <tathagata at alumnux.com>
> ---
>  .../linux/ipq806x/base-files/etc/board.d/01_leds   |   1 +
>  .../ipq806x/base-files/etc/board.d/02_network      |   1 +
>  target/linux/ipq806x/base-files/lib/ipq806x.sh     |   3 +
>  .../ipq806x/base-files/lib/upgrade/platform.sh     |   2 +
>  target/linux/ipq806x/image/Makefile                |  13 +-
>  ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch | 381
> +++++++++++++++++++++
>  target/linux/ipq806x/profiles/netgear.mk           |  13 +
>  7 files changed, 413 insertions(+), 1 deletion(-)  create mode 100644
> target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X
> 4-D780
> 0-device-tree.patch
> 
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds
> b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> index 07b5b06..b32c1cc 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> @@ -11,6 +11,7 @@ board_config_update
>  board=$(ipq806x_board_name)
>  
>  case "$board" in
> +d7800 |\
>  r7500)
>  	ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
>  	ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network
> b/target/linux/ipq806x/base-files/etc/board.d/02_network
> index 1302a55..6e18297 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
> @@ -13,6 +13,7 @@ board=$(ipq806x_board_name)
>  
>  case "$board" in
>  ap148 |\
> +d7800 |\
>  r7500)
>  	ucidef_add_switch "switch0" \
>  		"1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
> diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
> b/target/linux/ipq806x/base-files/lib/ipq806x.sh
> index 5b27bde..db22708 100644
> --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
> +++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
> @@ -17,6 +17,9 @@ ipq806x_board_detect() {
>  	*"AP148")
>  		name="ap148"
>  		;;
> +	*"D7800")
> +		name="d7800"
> +		;;
>  	*"DB149")
>  		name="db149"
>  		;;
> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> index c0e19a1..2400376 100644
> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
> @@ -7,6 +7,7 @@ platform_check_image() {
>  
>  	case "$board" in
>  	AP148 |\
> +	d7800 |\
>  	r7500)
>  		nand_do_platform_check $board $1
>  		return $?;
> @@ -21,6 +22,7 @@ platform_pre_upgrade() {
>  
>  	case "$board" in
>  	AP148 |\
> +	d7800 |\
>  	r7500)
>  		nand_do_upgrade "$1"
>  		;;
> diff --git a/target/linux/ipq806x/image/Makefile
> b/target/linux/ipq806x/image/Makefile
> index 14cf442..b880a1b 100644
> --- a/target/linux/ipq806x/image/Makefile
> +++ b/target/linux/ipq806x/image/Makefile
> @@ -103,6 +103,17 @@ define Device/AP148-legacy
>  	BOARD_NAME := ap148
>  endef
>  
> +define Device/D7800
> +	$(call Device/DniImage)
> +	DEVICE_DTS := qcom-ipq8064-d7800
> +	KERNEL_SIZE := 2097152
> +	NETGEAR_BOARD_ID := D7800
> +	NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
> +	BLOCKSIZE := 128KiB
> +	PAGESIZE := 2048
> +	BOARD_NAME := d7800
> +endef
> +
>  define Device/DB149
>  	$(call Device/FitImage)
>  	DEVICE_DTS := qcom-ipq8064-db149
> @@ -121,6 +132,6 @@ define Device/R7500
>  	BOARD_NAME := r7500
>  endef
>  
> -TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
> +TARGET_DEVICES += AP148 AP148-legacy D7800 DB149 R7500
>  
>  $(eval $(call BuildImage))
> diff --git
> a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk
> -X4-D7
> 800-device-tree.patch
> b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk
> -X4-D7
> 800-device-tree.patch
> new file mode 100644
> index 0000000..ecc1cff
> --- /dev/null
> +++ b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Night
> +++ ha
> +++ wk-X4-D7800-device-tree.patch
> @@ -0,0 +1,381 @@
> +--- a/arch/arm/boot/dts/Makefile	2015-09-22 18:30:09.033530282 +0530
> ++++ b/arch/arm/boot/dts/Makefile	2015-09-23 17:06:44.892947581 +0530
> +@@ -362,6 +362,7 @@
> + 	qcom-ipq8064-ap148.dtb \
> + 	qcom-ipq8064-db149.dtb \
> + 	qcom-ipq8064-r7500.dtb \
> ++	qcom-ipq8064-d7800.dtb \
> + 	qcom-msm8660-surf.dtb \
> + 	qcom-msm8960-cdp.dtb \
> + 	qcom-msm8974-sony-xperia-honami.dtb
> +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts	1970-01-01
> 05:30:00.000000000 +0530
> ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts	2015-09-23
> 17:06:45.336947567 +0530
> +@@ -0,0 +1,368 @@
> ++#include "qcom-ipq8064-v1.0.dtsi"
> ++
> ++#include <dt-bindings/input/input.h>
> ++
> ++/ {
> ++	model = "Netgear Nighthawk X4 D7800";
> ++	compatible = "netgear,d7800", "qcom,ipq8064";
> ++
> ++	memory at 0 {
> ++		reg = <0x42000000 0xe000000>;
> ++		device_type = "memory";
> ++	};
> ++
> ++	reserved-memory {
> ++		#address-cells = <1>;
> ++		#size-cells = <1>;
> ++		ranges;
> ++		rsvd at 41200000 {
> ++			reg = <0x41200000 0x300000>;
> ++			no-map;
> ++		};
> ++	};
> ++
> ++	aliases {
> ++		serial0 = &uart4;
> ++		mdio-gpio0 = &mdio0;
> ++	};
> ++
> ++	chosen {
> ++		bootargs = "rootfstype=squashfs noinitrd";
> ++		linux,stdout-path = "serial0:115200n8";
> ++	};
> ++
> ++	soc {
> ++		pinmux at 800000 {
> ++			i2c4_pins: i2c4_pinmux {
> ++				pins = "gpio12", "gpio13";
> ++				function = "gsbi4";
> ++				bias-disable;
> ++			};
> ++
> ++			pcie0_pins: pcie0_pinmux {
> ++				mux {
> ++					pins = "gpio3";
> ++					function = "pcie1_rst";
> ++					drive-strength = <12>;
> ++					bias-disable;
> ++				};
> ++			};
> ++
> ++			pcie1_pins: pcie1_pinmux {
> ++				mux {
> ++					pins = "gpio48";
> ++					function = "pcie2_rst";
> ++					drive-strength = <12>;
> ++					bias-disable;
> ++				};
> ++			};
> ++
> ++			nand_pins: nand_pins {
> ++				mux {
> ++					pins = "gpio34", "gpio35", "gpio36",
> ++					       "gpio37", "gpio38", "gpio39",
> ++					       "gpio40", "gpio41", "gpio42",
> ++					       "gpio43", "gpio44", "gpio45",
> ++					       "gpio46", "gpio47";
> ++					function = "nand";
> ++					drive-strength = <10>;
> ++					bias-disable;
> ++				};
> ++				pullups {
> ++					pins = "gpio39";
> ++					bias-pull-up;
> ++				};
> ++				hold {
> ++					pins = "gpio40", "gpio41", "gpio42",
> ++					       "gpio43", "gpio44", "gpio45",
> ++					       "gpio46", "gpio47";
> ++					bias-bus-hold;
> ++				};
> ++			};
> ++
> ++			mdio0_pins: mdio0_pins {
> ++				mux {
> ++					pins = "gpio0", "gpio1";
> ++					function = "gpio";
> ++					drive-strength = <8>;
> ++					bias-disable;
> ++				};
> ++			};
> ++
> ++			rgmii2_pins: rgmii2_pins {
> ++				mux {
> ++					pins = "gpio27", "gpio28", "gpio29",
> "gpio30", "gpio31", "gpio32",
> ++					       "gpio51", "gpio52", "gpio59",
> "gpio60", "gpio61", "gpio62" ;
> ++					function = "rgmii2";
> ++					drive-strength = <8>;
> ++					bias-disable;
> ++				};
> ++			};
> ++		};
> ++
> ++		gsbi at 16300000 {
> ++			qcom,mode = <GSBI_PROT_I2C_UART>;
> ++			status = "ok";
> ++			serial at 16340000 {
> ++				status = "ok";
> ++			};
> ++			/*
> ++			 * The i2c device on gsbi4 should not be enabled.
> ++			 * On ipq806x designs gsbi4 i2c is meant for
> exclusive
> ++			 * RPM usage. Turning this on in kernel manifests as
> ++			 * i2c failure for the RPM.
> ++			 */
> ++		};
> ++
> ++		sata-phy at 1b400000 {
> ++			status = "ok";
> ++		};
> ++
> ++		sata at 29000000 {
> ++			status = "ok";
> ++		};
> ++
> ++		phy at 100f8800 {		/* USB3 port 1 HS phy */
> ++			status = "ok";
> ++		};
> ++
> ++		phy at 100f8830 {		/* USB3 port 1 SS phy */
> ++			status = "ok";
> ++		};
> ++
> ++		phy at 110f8800 {		/* USB3 port 0 HS phy */
> ++			status = "ok";
> ++		};
> ++
> ++		phy at 110f8830 {		/* USB3 port 0 SS phy */
> ++			status = "ok";
> ++		};
> ++
> ++		usb30 at 0 {
> ++			status = "ok";
> ++		};
> ++
> ++		usb30 at 1 {
> ++			status = "ok";
> ++		};
> ++
> ++		pcie0: pci at 1b500000 {
> ++			status = "ok";
> ++			reset-gpio = <&qcom_pinmux 3 0>;
> ++			pinctrl-0 = <&pcie0_pins>;
> ++			pinctrl-names = "default";
> ++		};
> ++
> ++		pcie1: pci at 1b700000 {
> ++			status = "ok";
> ++			reset-gpio = <&qcom_pinmux 48 0>;
> ++			pinctrl-0 = <&pcie1_pins>;
> ++			pinctrl-names = "default";
> ++		};
> ++
> ++		nand at 1ac00000 {
> ++			status = "ok";
> ++
> ++			pinctrl-0 = <&nand_pins>;
> ++			pinctrl-names = "default";
> ++
> ++			nand-ecc-strength = <4>;
> ++			nand-bus-width = <8>;
> ++
> ++			#address-cells = <1>;
> ++			#size-cells = <1>;
> ++
> ++			qcadata at 0 {
> ++				label = "qcadata";
> ++				reg = <0x0000000 0x0c80000>;
> ++				read-only;
> ++			};
> ++
> ++			APPSBL at c80000 {
> ++				label = "APPSBL";
> ++				reg = <0x0c80000 0x0500000>;
> ++				read-only;
> ++			};
> ++
> ++			APPSBLENV at 1180000 {
> ++				label = "APPSBLENV";
> ++				reg = <0x1180000 0x0080000>;
> ++				read-only;
> ++			};
> ++
> ++			art: art at 1200000 {
> ++				label = "art";
> ++				reg = <0x1200000 0x0140000>;
> ++				read-only;
> ++			};
> ++
> ++			artbak: art at 1340000 {
> ++				label = "artbak";
> ++				reg = <0x1340000 0x0140000>;
> ++				read-only;
> ++			};
> ++
> ++			kernel at 1480000 {
> ++				label = "kernel";
> ++				reg = <0x1480000 0x0200000>;
> ++			};
> ++
> ++			ubi at 1680000 {
> ++				label = "ubi";
> ++				reg = <0x1680000 0x1E00000>;
> ++			};
> ++
> ++			netgear at 3480000 {
> ++				label = "netgear";
> ++				reg = <0x3480000 0x4480000>;
> ++				read-only;
> ++			};
> ++
> ++			reserve at 7900000 {
> ++				label = "reserve";
> ++				reg = <0x7900000 0x0700000>;
> ++				read-only;
> ++			};
> ++
> ++			firmware at 1480000 {
> ++				label = "firmware";
> ++				reg = <0x1480000 0x2000000>;
> ++			};
> ++
> ++		};
> ++
> ++		mdio0: mdio {
> ++			compatible = "virtual,mdio-gpio";
> ++			#address-cells = <1>;
> ++			#size-cells = <0>;
> ++			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
> ++			pinctrl-0 = <&mdio0_pins>;
> ++			pinctrl-names = "default";
> ++
> ++			phy0: ethernet-phy at 0 {
> ++				device_type = "ethernet-phy";
> ++				reg = <0>;
> ++				qca,ar8327-initvals = <
> ++					0x00004 0x7600000   /* PAD0_MODE */
> ++					0x00008 0x1000000   /* PAD5_MODE */
> ++					0x0000c 0x80        /* PAD6_MODE */
> ++					0x000e4 0xaa545     /* MAC_POWER_SEL
> */
> ++					0x000e0 0xc74164de  /* SGMII_CTRL */
> ++					0x0007c 0x4e        /* PORT0_STATUS
> */
> ++					0x00094 0x4e        /* PORT6_STATUS
> */
> ++					>;
> ++			};
> ++
> ++			phy4: ethernet-phy at 4 {
> ++				device_type = "ethernet-phy";
> ++				reg = <4>;
> ++			};
> ++		};
> ++
> ++		gmac1: ethernet at 37200000 {
> ++			status = "ok";
> ++			phy-mode = "rgmii";
> ++			phy-handle = <&phy4>;
> ++			qcom,id = <1>;
> ++
> ++			pinctrl-0 = <&rgmii2_pins>;
> ++			pinctrl-names = "default";
> ++
> ++			mtd-mac-address = <&art 6>;
> ++		};
> ++
> ++		gmac2: ethernet at 37400000 {
> ++			status = "ok";
> ++			phy-mode = "sgmii";
> ++			qcom,id = <2>;
> ++
> ++			mtd-mac-address = <&art 0>;
> ++
> ++			fixed-link {
> ++				speed = <1000>;
> ++				full-duplex;
> ++			};
> ++		};
> ++	};
> ++
> ++	gpio-keys {
> ++		compatible = "gpio-keys";
> ++
> ++		wifi {
> ++			label = "wifi";
> ++			gpios = <&qcom_pinmux 6 1>;
> ++			linux,code = <KEY_WLAN>;
> ++		};
> ++
> ++		reset {
> ++			label = "reset";
> ++			gpios = <&qcom_pinmux 54 1>;
> ++			linux,code = <KEY_RESTART>;
> ++		};
> ++
> ++		wps {
> ++			label = "wps";
> ++			gpios = <&qcom_pinmux 65 1>;
> ++			linux,code = <KEY_WPS_BUTTON>;
> ++		};
> ++	};
> ++
> ++	gpio-leds {
> ++		compatible = "gpio-leds";
> ++
> ++		usb1 {
> ++			label = "d7800:amber:usb1";
> ++			gpios = <&qcom_pinmux 7 0>;
> ++		};
> ++
> ++		usb3 {
> ++			label = "d7800:amber:usb3";
> ++			gpios = <&qcom_pinmux 8 0>;
> ++		};
> ++
> ++		status {
> ++			label = "d7800:amber:status";
> ++			gpios = <&qcom_pinmux 9 0>;
> ++		};
> ++
> ++		internet {
> ++			label = "d7800:white:internet";
> ++			gpios = <&qcom_pinmux 22 0>;
> ++		};
> ++
> ++		wan {
> ++			label = "d7800:white:wan";
> ++			gpios = <&qcom_pinmux 23 0>;
> ++		};
> ++
> ++		wps {
> ++			label = "d7800:white:wps";
> ++			gpios = <&qcom_pinmux 24 0>;
> ++		};
> ++
> ++		esata {
> ++			label = "d7800:white:esata";
> ++			gpios = <&qcom_pinmux 26 0>;
> ++		};
> ++
> ++		power {
> ++			label = "d7800:white:power";
> ++			gpios = <&qcom_pinmux 53 0>;
> ++			default-state = "on";
> ++		};
> ++
> ++		rfkill {
> ++			label = "d7800:white:rfkill";
> ++			gpios = <&qcom_pinmux 64 0>;
> ++		};
> ++
> ++		wifi5g {
> ++			label = "d7800:white:wifi5g";
> ++			gpios = <&qcom_pinmux 67 0>;
> ++		};
> ++	};
> ++};
> ++
> ++&adm_dma {
> ++	status = "ok";
> ++};
> diff --git a/target/linux/ipq806x/profiles/netgear.mk
> b/target/linux/ipq806x/profiles/netgear.mk
> index 3402f45..25258cd 100644
> --- a/target/linux/ipq806x/profiles/netgear.mk
> +++ b/target/linux/ipq806x/profiles/netgear.mk
> @@ -6,6 +6,18 @@
>  # See /LICENSE for more information.
>  #
>  
> +define Profile/D7800
> +	NAME:=Netgear Nighthawk X4 D7800
> +	PACKAGES:= \
> +		kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
> +		kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
> +		kmod-ath10k wpad-mini ath10k-firmware-qca99x0 endef
> +
> +define Profile/D7800/Description
> +	Package set for the Netgear Nighthawk X4 D7800.
> +endef
> +
>  define Profile/R7500
>  	NAME:=Netgear Nighthawk X4 R7500
>  	PACKAGES:= \
> @@ -17,4 +29,5 @@ endef
>  define Profile/R7500/Description
>  	Package set for the Netgear Nighthawk X4 R7500.
>  endef
> +$(eval $(call Profile,D7800))
>  $(eval $(call Profile,R7500))
> --
> 1.9.1
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list