[OpenWrt-Devel] [PATCHv2 1/2] lantiq: Add support for linux 4.4

Martin Blumenstingl martin.blumenstingl at googlemail.com
Mon Jan 18 05:50:46 EST 2016


The following patches were dropped because they are already applied
upstream:
- 0038-MIPS-lantiq-fpi-on-ar9.patch
- 0039-MIPS-lantiq-initialize-usb-on-boot.patch
- 0042-USB-DWC2-big-endian-support.patch
- 0043-gpio-stp-xway-fix-phy-mask.patch

All other patches were simply refreshed, except the following:
- 0001-MIPS-lantiq-add-pcie-driver.patch
  Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled
  some PMU gates for the vrx200 / VR9 SoCs) were removed since the
  upstream kernel disables unused PMU gates automatically (since
  95135bfa7ead1becc2879230f72583dde2b71a0c
  "MIPS: Lantiq: Deactivate most of the devices by default").
- 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
  Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers
  should use of_get_mac_address(). of_get_mac_address_mtd is not
  available for drivers anymore since it's called automatically within
  of_get_mac_address().
- 0028-NET-lantiq-various-etop-fixes.patch
  Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch

While refreshing the kernel configuration SPI support had to be moved to
config-4.4 because otherwise M25P80 was disabled.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 target/linux/lantiq/config-4.4                     |  204 +
 .../0001-MIPS-lantiq-add-pcie-driver.patch         | 5521 ++++++++++++++++++++
 .../0002-MIPS-lantiq-dtb-image-hack.patch          |   31 +
 .../0004-MIPS-lantiq-add-atm-hack.patch            |  500 ++
 .../0007-MIPS-lantiq-add-basic-tffs-driver.patch   |  111 +
 .../0008-MIPS-lantiq-backport-old-timer-code.patch | 1028 ++++
 .../0012-pinctrl-lantiq-fix-up-pinmux.patch        |   68 +
 ...0013-MTD-lantiq-xway-fix-invalid-operator.patch |   24 +
 ...xway-the-latched-command-should-be-persis.patch |   44 +
 .../0015-MTD-lantiq-xway-remove-endless-loop.patch |   41 +
 ...xway-add-missing-write_buf-and-read_buf-t.patch |   55 +
 .../0017-MTD-xway-fix-nand-locking.patch           |   89 +
 .../0018-MTD-nand-lots-of-xrx200-fixes.patch       |  125 +
 ...MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch |   25 +
 ...MTD-m25p80-allow-loading-mtd-name-from-OF.patch |   44 +
 ...023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch |  537 ++
 ...024-NET-lantiq-adds-PHY11G-firmware-blobs.patch |  364 ++
 .../0025-NET-MIPS-lantiq-adds-xrx200-net.patch     | 3344 ++++++++++++
 .../patches-4.4/0026-NET-multi-phy-support.patch   |   53 +
 .../0028-NET-lantiq-various-etop-fixes.patch       |  911 ++++
 .../0030-GPIO-add-named-gpio-exports.patch         |  166 +
 ...2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch | 1034 ++++
 .../0032-USB-fix-roothub-for-IFXHCD.patch          |   31 +
 ...ompile-when-reset-RESET_CONTROLLER-is-not.patch |   45 +
 ...-lantiq-wifi-and-ethernet-eeprom-handling.patch |  630 +++
 .../0036-owrt-generic-dtb-image-hack.patch         |   32 +
 .../0040-USB-DWC2-enable-usb-power-gpio.patch      |   35 +
 .../patches-4.4/0041-USB-DWC2-add-ltq-params.patch |   46 +
 ...tiq-introduce-new-dedicated-devicetree-bi.patch | 1378 +++++
 ...nctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch |   28 +
 ...trl-lantiq-2-pins-have-the-wrong-mux-list.patch |   28 +
 ...spi-add-support-for-Lantiq-SPI-controller.patch | 1133 ++++
 .../0151-lantiq-ifxmips_pcie-use-of.patch          |  158 +
 .../0160-owrt-lantiq-multiple-flash.patch          |  222 +
 ...D-cfi-cmdset-0001-disable-buffered-writes.patch |   11 +
 35 files changed, 18096 insertions(+)
 create mode 100644 target/linux/lantiq/config-4.4
 create mode 100644 target/linux/lantiq/patches-4.4/0001-MIPS-lantiq-add-pcie-driver.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0002-MIPS-lantiq-dtb-image-hack.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0004-MIPS-lantiq-add-atm-hack.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0007-MIPS-lantiq-add-basic-tffs-driver.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0008-MIPS-lantiq-backport-old-timer-code.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0012-pinctrl-lantiq-fix-up-pinmux.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0013-MTD-lantiq-xway-fix-invalid-operator.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0015-MTD-lantiq-xway-remove-endless-loop.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0017-MTD-xway-fix-nand-locking.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0018-MTD-nand-lots-of-xrx200-fixes.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0026-NET-multi-phy-support.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0028-NET-lantiq-various-etop-fixes.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0030-GPIO-add-named-gpio-exports.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0032-USB-fix-roothub-for-IFXHCD.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0036-owrt-generic-dtb-image-hack.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0040-USB-DWC2-enable-usb-power-gpio.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0151-lantiq-ifxmips_pcie-use-of.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0160-owrt-lantiq-multiple-flash.patch
 create mode 100644 target/linux/lantiq/patches-4.4/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch

diff --git a/target/linux/lantiq/config-4.4 b/target/linux/lantiq/config-4.4
new file mode 100644
index 0000000..8943c6f
--- /dev/null
+++ b/target/linux/lantiq/config-4.4
@@ -0,0 +1,204 @@
+CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DTC=y
+CONFIG_DT_EASY50712=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_MM_LANTIQ=y
+CONFIG_GPIO_STP_XWAY=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_LANTIQ=y
+CONFIG_LANTIQ_ETOP=y
+# CONFIG_LANTIQ_PHY is not set
+CONFIG_LANTIQ_WDT=y
+# CONFIG_LANTIQ_XRX200 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LIBFDT=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MT_SMP is not set
+CONFIG_MIPS_NO_APPENDED_DTB=y
+# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+CONFIG_MIPS_SPRAM=y
+# CONFIG_MIPS_VPE_LOADER is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_LANTIQ=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
+CONFIG_MTD_SPLIT_EVA_FW=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_TPLINK_FW=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+# CONFIG_NO_IOPORT_MAP is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PCI=y
+# CONFIG_PCIE_LANTIQ is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LANTIQ=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_LANTIQ=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINCTRL_XWAY=y
+CONFIG_PSB6970_PHY=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_LANTIQ=y
+# CONFIG_SOC_AMAZON_SE is not set
+# CONFIG_SOC_FALCON is not set
+CONFIG_SOC_TYPE_XWAY=y
+CONFIG_SOC_XWAY=y
+CONFIG_SPI=y
+CONFIG_SPI_LANTIQ=y
+CONFIG_SPI_MASTER=y
+CONFIG_SRCU=y
+# CONFIG_SUNXI_SRAM is not set
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWCONFIG=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_USE_OF=y
+# CONFIG_XRX200_PHY_FW is not set
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/lantiq/patches-4.4/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-4.4/0001-MIPS-lantiq-add-pcie-driver.patch
new file mode 100644
index 0000000..1a4d863
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0001-MIPS-lantiq-add-pcie-driver.patch
@@ -0,0 +1,5521 @@
+From 6f933347d0b4ed02d9534f5fa07f7b99f13eeaa1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 7 Aug 2014 18:12:28 +0200
+Subject: [PATCH 01/36] MIPS: lantiq: add pcie driver
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/lantiq/Kconfig           |   10 +
+ arch/mips/lantiq/xway/sysctrl.c    |    2 +
+ arch/mips/pci/Makefile             |    2 +
+ arch/mips/pci/fixup-lantiq-pcie.c  |   82 +++
+ arch/mips/pci/fixup-lantiq.c       |    5 +-
+ arch/mips/pci/ifxmips_pci_common.h |   57 ++
+ arch/mips/pci/ifxmips_pcie.c       | 1099 ++++++++++++++++++++++++++++++
+ arch/mips/pci/ifxmips_pcie.h       |  135 ++++
+ arch/mips/pci/ifxmips_pcie_ar10.h  |  290 ++++++++
+ arch/mips/pci/ifxmips_pcie_msi.c   |  392 +++++++++++
+ arch/mips/pci/ifxmips_pcie_phy.c   |  478 +++++++++++++
+ arch/mips/pci/ifxmips_pcie_pm.c    |  176 +++++
+ arch/mips/pci/ifxmips_pcie_pm.h    |   36 +
+ arch/mips/pci/ifxmips_pcie_reg.h   | 1001 +++++++++++++++++++++++++++
+ arch/mips/pci/ifxmips_pcie_vr9.h   |  271 ++++++++
+ arch/mips/pci/pci.c                |   25 +
+ arch/mips/pci/pcie-lantiq.h        | 1305 ++++++++++++++++++++++++++++++++++++
+ drivers/pci/pcie/aer/Kconfig       |    2 +-
+ include/linux/pci.h                |    2 +
+ include/linux/pci_ids.h            |    6 +
+ 20 files changed, 5374 insertions(+), 2 deletions(-)
+ create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c
+ create mode 100644 arch/mips/pci/ifxmips_pci_common.h
+ create mode 100644 arch/mips/pci/ifxmips_pcie.c
+ create mode 100644 arch/mips/pci/ifxmips_pcie.h
+ create mode 100644 arch/mips/pci/ifxmips_pcie_ar10.h
+ create mode 100644 arch/mips/pci/ifxmips_pcie_msi.c
+ create mode 100644 arch/mips/pci/ifxmips_pcie_phy.c
+ create mode 100644 arch/mips/pci/ifxmips_pcie_pm.c
+ create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h
+ create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h
+ create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h
+ create mode 100644 arch/mips/pci/pcie-lantiq.h
+
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -17,6 +17,7 @@ config SOC_XWAY
+ 	bool "XWAY"
+ 	select SOC_TYPE_XWAY
+ 	select HW_HAS_PCI
++	select ARCH_SUPPORTS_MSI
+ 
+ config SOC_FALCON
+ 	bool "FALCON"
+@@ -37,6 +38,15 @@ config PCI_LANTIQ
+ 	bool "PCI Support"
+ 	depends on SOC_XWAY && PCI
+ 
++config PCIE_LANTIQ
++	bool "PCIE Support"
++	depends on SOC_XWAY && PCI
++
++config PCIE_LANTIQ_MSI
++	bool
++	depends on PCIE_LANTIQ && PCI_MSI
++	default y
++
+ config XRX200_PHY_FW
+ 	bool "XRX200 PHY firmware loader"
+ 	depends on SOC_XWAY
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -45,6 +45,8 @@ obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_SOC_RT288X)	+= pci-rt2880.o
+ obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
++obj-$(CONFIG_PCIE_LANTIQ)	+= ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o
++obj-$(CONFIG_PCIE_LANTIQ_MSI)	+= pcie-lantiq-msi.o
+ obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
+--- /dev/null
++++ b/arch/mips/pci/fixup-lantiq-pcie.c
+@@ -0,0 +1,74 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_fixup_pcie.c
++** PROJECT      : IFX UEIP for VRX200
++** MODULES      : PCIe 
++**
++** DATE         : 02 Mar 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe Root Complex Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Version $Date        $Author         $Comment
++** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++/*!
++ \file ifxmips_fixup_pcie.c
++ \ingroup IFX_PCIE  
++ \brief PCIe Fixup functions source file
++*/
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++#include <linux/pci_ids.h>
++
++#include <lantiq_soc.h>
++
++#include "pcie-lantiq.h"
++
++static void
++ifx_pcie_fixup_resource(struct pci_dev *dev)
++{
++    u32 reg;
++
++    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
++
++    printk("%s: fixup host controller %s (%04x:%04x)\n", 
++        __func__, pci_name(dev), dev->vendor, dev->device); 
++
++   /* Setup COMMAND register */
++    reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | 
++          PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR;
++    pci_write_config_word(dev, PCI_COMMAND, reg);
++    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource);
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource);
++
++static void
++ifx_pcie_rc_class_early_fixup(struct pci_dev *dev)
++{
++    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
++
++    if (dev->devfn == PCI_DEVFN(0, 0) &&
++        (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
++
++        dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff);
++
++        printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__);
++    }
++    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
++    mdelay(10);
++}
++
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE,
++     ifx_pcie_rc_class_early_fixup);
++
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
++     ifx_pcie_rc_class_early_fixup);
+--- a/arch/mips/pci/fixup-lantiq.c
++++ b/arch/mips/pci/fixup-lantiq.c
+@@ -8,12 +8,18 @@
+ 
+ #include <linux/of_irq.h>
+ #include <linux/of_pci.h>
++#include "ifxmips_pci_common.h"
+ 
+ int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL;
+ int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL;
+ 
+ int pcibios_plat_dev_init(struct pci_dev *dev)
+ {
++#ifdef CONFIG_PCIE_LANTIQ
++	if (pci_find_capability(dev, PCI_CAP_ID_EXP))
++		ifx_pcie_bios_plat_dev_init(dev);
++#endif
++
+ 	if (ltq_pci_plat_arch_init)
+ 		return ltq_pci_plat_arch_init(dev);
+ 
+@@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev
+ 
+ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+ {
++#ifdef CONFIG_PCIE_LANTIQ
++	if (pci_find_capability(dev, PCI_CAP_ID_EXP))
++		return ifx_pcie_bios_map_irq(dev, slot, pin);
++#endif
++
+ 	return of_irq_parse_and_map_pci(dev, slot, pin);
+ }
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pci_common.h
+@@ -0,0 +1,57 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pci_common.h
++** PROJECT      : IFX UEIP
++** MODULES      : PCI subsystem
++**
++** DATE         : 30 June 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe Root Complex Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Version $Date        $Author         $Comment
++** 0.0.1    30 June,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++
++#ifndef IFXMIPS_PCI_COMMON_H
++#define IFXMIPS_PCI_COMMON_H
++#include <linux/version.h>
++/*!
++ \defgroup IFX_PCI_COM  IFX PCI/PCIe common parts for OS integration  
++ \brief  PCI/PCIe common parts
++*/
++
++/*!
++ \defgroup IFX_PCI_COM_OS OS APIs
++ \ingroup IFX_PCI_COM
++ \brief PCI/PCIe bus driver OS interface functions
++*/
++/*!
++  \file ifxmips_pci_common.h
++  \ingroup IFX_PCI_COM
++  \brief PCI/PCIe bus driver common OS header file
++*/
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
++#define IFX_PCI_CONST
++#else
++#define IFX_PCI_CONST const
++#endif
++#ifdef CONFIG_IFX_PCI
++extern int ifx_pci_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
++extern int ifx_pci_bios_plat_dev_init(struct pci_dev *dev);
++#endif /* COFNIG_IFX_PCI */
++
++#ifdef CONFIG_PCIE_LANTIQ
++extern int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
++extern int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev);
++#endif
++
++#endif /* IFXMIPS_PCI_COMMON_H */
++
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie.c
+@@ -0,0 +1,1092 @@
++/*
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ *  Copyright (C) 2009 Lei Chuanhua <chuanhua.lei at infineon.com>
++ *  Copyright (C) 2013 John Crispin <blogic at openwrt.org>
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <asm/paccess.h>
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++#include <linux/module.h>
++
++#include "ifxmips_pcie.h"
++#include "ifxmips_pcie_reg.h"
++
++/* Enable 32bit io due to its mem mapped io nature */
++#define IFX_PCIE_ERROR_INT
++#define IFX_PCIE_IO_32BIT
++
++#define IFX_PCIE_IR                     (INT_NUM_IM4_IRL0 + 25)
++#define IFX_PCIE_INTA                   (INT_NUM_IM4_IRL0 + 8)
++#define IFX_PCIE_INTB                   (INT_NUM_IM4_IRL0 + 9)
++#define IFX_PCIE_INTC                   (INT_NUM_IM4_IRL0 + 10)
++#define IFX_PCIE_INTD                   (INT_NUM_IM4_IRL0 + 11)
++#define MS(_v, _f)  (((_v) & (_f)) >> _f##_S)
++#define SM(_v, _f)  (((_v) << _f##_S) & (_f))
++#define IFX_REG_SET_BIT(_f, _r) \
++	IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
++
++#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
++
++static DEFINE_SPINLOCK(ifx_pcie_lock);
++
++u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
++
++static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
++    {
++        .ir_irq = {
++            .irq  = IFX_PCIE_IR,
++            .name = "ifx_pcie_rc0",
++        },
++
++        .legacy_irq = {
++            {
++                .irq_bit = PCIE_IRN_INTA,
++                .irq     = IFX_PCIE_INTA,
++            },
++            {
++                .irq_bit = PCIE_IRN_INTB,
++                .irq     = IFX_PCIE_INTB,
++            },
++            {
++                .irq_bit = PCIE_IRN_INTC,
++                .irq     = IFX_PCIE_INTC,
++            },
++            {
++                .irq_bit = PCIE_IRN_INTD,
++                .irq     = IFX_PCIE_INTD,
++            },
++        },
++    },
++
++};
++
++void ifx_pcie_debug(const char *fmt, ...)
++{
++	static char buf[256] = {0};      /* XXX */
++	va_list ap;
++
++	va_start(ap, fmt);
++	vsnprintf(buf, sizeof(buf), fmt, ap);
++	va_end(ap);
++
++	printk("%s", buf);
++}
++
++
++static inline int pcie_ltssm_enable(int pcie_port)
++{
++	int i;
++
++	/* Enable LTSSM */
++	IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port));
++
++	/* Wait for the link to come up */
++	for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
++		if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING))
++			return 0;
++		udelay(10);
++	}
++
++	printk("%s link timeout!!!!!\n", __func__);
++	return -1;
++}
++
++static inline void pcie_status_register_clear(int pcie_port)
++{
++	IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
++	IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
++	IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
++	IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
++	IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
++	IFX_REG_W32(0, PCIE_RSTS(pcie_port));
++	IFX_REG_W32(0, PCIE_UES_R(pcie_port));
++	IFX_REG_W32(0, PCIE_UEMR(pcie_port));
++	IFX_REG_W32(0, PCIE_UESR(pcie_port));
++	IFX_REG_W32(0, PCIE_CESR(pcie_port));
++	IFX_REG_W32(0, PCIE_CEMR(pcie_port));
++	IFX_REG_W32(0, PCIE_RESR(pcie_port));
++	IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
++	IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
++	IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
++	IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
++	IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
++	IFX_REG_W32(0, PCIE_QSR(pcie_port));
++	IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
++}
++
++static inline int ifx_pcie_link_up(int pcie_port)
++{
++    return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
++}
++
++
++static inline void pcie_mem_io_setup(int pcie_port)
++{
++    u32 reg;
++    /*
++     * BAR[0:1] readonly register 
++     * RC contains only minimal BARs for packets mapped to this device 
++     * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
++     * reside on the downstream side fo the bridge.
++     */
++    reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
++        | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
++
++    IFX_REG_W32(reg, PCIE_MBML(pcie_port));
++
++
++#ifdef IFX_PCIE_PREFETCH_MEM_64BIT
++    reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_PMBL_END_ADDR)
++        | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_PMBL_UPPER_12BIT)
++        | PCIE_PMBL_64BIT_ADDR;
++    IFX_REG_W32(reg, PCIE_PMBL(pcie_port));
++
++    /* Must configure upper 32bit */
++    IFX_REG_W32(0, PCIE_PMBU32(pcie_port));
++    IFX_REG_W32(0, PCIE_PMLU32(pcie_port));
++#else
++    /* PCIe_PBML, same as MBML */
++    IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
++#endif 
++
++    /* IO Address Range */
++    reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
++        | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
++#ifdef IFX_PCIE_IO_32BIT    
++    reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
++#endif /* IFX_PCIE_IO_32BIT */
++    IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
++
++#ifdef IFX_PCIE_IO_32BIT
++    reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
++        | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
++    IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
++
++#endif /* IFX_PCIE_IO_32BIT */
++}
++
++static inline void
++pcie_device_setup(int pcie_port)
++{
++    u32 reg;
++
++    /* Device capability register, set up Maximum payload size */
++    reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
++    reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
++    reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
++
++    /* Only available for EP */
++    reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
++    IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
++
++    /* Device control and status register */
++    /* Set Maximum Read Request size for the device as a Requestor */
++    reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
++
++    /* 
++     * Request size can be larger than the MPS used, but the completions returned 
++     * for the read will be bounded by the MPS size.
++     * In our system, Max request size depends on AHB burst size. It is 64 bytes.
++     * but we set it as 128 as minimum one.
++     */
++    reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
++            | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
++
++    /* Enable relaxed ordering, no snoop, and all kinds of errors */
++    reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
++
++    IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
++}
++
++static inline void
++pcie_link_setup(int pcie_port)
++{
++    u32 reg;
++
++    /*
++     * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM 
++     * L0s is reported during link training via TS1 order set by N_FTS
++     */
++    reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
++    reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
++    reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
++    IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
++
++    /* Link control and status register */
++    reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
++
++    /* Link Enable, ASPM enabled  */
++    reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
++
++#ifdef CONFIG_PCIEASPM
++    /*  
++     * We use the same physical reference clock that the platform provides on the connector 
++     * It paved the way for ASPM to calculate the new exit Latency
++     */
++    reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
++    reg |= PCIE_LCTLSTS_COM_CLK_CFG;
++    /*
++     * We should disable ASPM by default except that we have dedicated power management support
++     * Enable ASPM will cause the system hangup/instability, performance degration
++     */
++    reg |= PCIE_LCTLSTS_ASPM_ENABLE;
++#else
++    reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
++#endif /* CONFIG_PCIEASPM */
++
++    /* 
++     * The maximum size of any completion with data packet is bounded by the MPS setting 
++     * in  device control register 
++     */
++
++    /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
++    reg &= ~ PCIE_LCTLSTS_RCB128;
++
++    IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
++}
++
++static inline void pcie_error_setup(int pcie_port)
++{
++	u32 reg;
++
++	/* 
++	* Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone 
++	* Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE 
++	*/
++	reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
++	reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
++
++	IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
++
++	/* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
++	reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
++	reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
++	IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
++
++	/* Uncorrectable Error Severity Register, ALL errors are FATAL */
++	IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
++
++	/* Correctable Error Mask Register, unmask <enable> all bits */
++	reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
++	reg &= ~PCIE_CORRECTABLE_ERR;
++	IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
++
++	/* Advanced Error Capabilities and Control Registr */
++	reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
++	reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
++	IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
++
++	/* Root Error Command Register, Report all types of errors */
++	reg = IFX_REG_R32(PCIE_RECR(pcie_port));
++	reg |= PCIE_RECR_ERR_REPORT_EN;
++	IFX_REG_W32(reg, PCIE_RECR(pcie_port));
++
++	/* Clear the Root status register */
++	reg = IFX_REG_R32(PCIE_RESR(pcie_port));
++	IFX_REG_W32(reg, PCIE_RESR(pcie_port));
++}
++
++static inline void pcie_port_logic_setup(int pcie_port)
++{
++	u32 reg;
++
++	/* FTS number, default 12, increase to 63, may increase time from/to L0s to L0  */
++	reg = IFX_REG_R32(PCIE_AFR(pcie_port));
++	reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
++	reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
++		| SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
++	/* L0s and L1 entry latency */
++	reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
++	reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
++		| SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
++	IFX_REG_W32(reg, PCIE_AFR(pcie_port));
++
++
++	/* Port Link Control Register */
++	reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
++	reg |= PCIE_PLCR_DLL_LINK_EN;  /* Enable the DLL link */
++	IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
++
++	/* Lane Skew Register */
++	reg = IFX_REG_R32(PCIE_LSR(pcie_port));
++	/* Enable ACK/NACK and FC */
++	reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE);
++	IFX_REG_W32(reg, PCIE_LSR(pcie_port));
++
++	/* Symbol Timer Register and Filter Mask Register 1 */
++	reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
++
++	/* Default SKP interval is very accurate already, 5us */
++	/* Enable IO/CFG transaction */
++	reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
++	/* Disable FC WDT */
++	reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
++	IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
++
++	/* Filter Masker Register 2 */
++	reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
++	reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
++	IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
++
++	/* VC0 Completion Receive Queue Control Register */
++	reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
++	reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
++	reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
++	IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
++}
++
++static inline void pcie_rc_cfg_reg_setup(int pcie_port)
++{
++	u32 reg;
++
++	/* Disable LTSSM */
++	IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); /* Disable LTSSM */
++
++	pcie_mem_io_setup(pcie_port);
++
++	/* XXX, MSI stuff should only apply to EP */
++	/* MSI Capability: Only enable 32-bit addresses */
++	reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
++	reg &= ~PCIE_MCAPR_ADDR64_CAP;
++
++	reg |= PCIE_MCAPR_MSI_ENABLE;
++
++	/* Disable multiple message */
++	reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
++	IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
++
++
++	/* Enable PME, Soft reset enabled */
++	reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
++	reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
++	IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
++
++	/* setup the bus */
++	reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
++	IFX_REG_W32(reg, PCIE_BNR(pcie_port));
++
++
++	pcie_device_setup(pcie_port);
++	pcie_link_setup(pcie_port);
++	pcie_error_setup(pcie_port);
++
++	/* Root control and capabilities register */
++	reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
++	reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
++	IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
++
++	/* Port VC Capability Register 2 */
++	reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
++	reg &= ~PCIE_PVC2_VC_ARB_WRR;
++	reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
++	IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
++
++	/* VC0 Resource Capability Register */
++	reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
++	reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
++	IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
++
++	pcie_port_logic_setup(pcie_port);
++}
++
++static int ifx_pcie_wait_phy_link_up(int pcie_port)
++{
++#define IFX_PCIE_PHY_LINK_UP_TIMEOUT  1000 /* XXX, tunable */
++    int i;
++
++    /* Wait for PHY link is up */
++    for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
++        if (ifx_pcie_link_up(pcie_port)) {
++            break;
++        }
++        udelay(100);
++    }
++    if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
++        printk(KERN_ERR "%s timeout\n", __func__);
++        return -1;
++    }
++
++    /* Check data link up or not */
++    if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
++        printk(KERN_ERR "%s DLL link is still down\n", __func__);
++        return -1;
++    }
++
++    /* Check Data link active or not */
++    if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
++        printk(KERN_ERR "%s DLL is not active\n", __func__);
++        return -1;
++    }
++    return 0;
++}
++
++static inline int pcie_app_loigc_setup(int pcie_port)
++{
++	/* supress ahb bus errrors */
++	IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
++
++	/* Pull PCIe EP out of reset */
++	pcie_device_rst_deassert(pcie_port);
++
++	/* Start LTSSM training between RC and EP */
++	pcie_ltssm_enable(pcie_port);
++
++	/* Check PHY status after enabling LTSSM */
++	if (ifx_pcie_wait_phy_link_up(pcie_port) != 0)
++		return -1;
++
++	return 0;
++}
++
++/*
++ * The numbers below are directly from the PCIe spec table 3-4/5. 
++ */
++static inline void pcie_replay_time_update(int pcie_port)
++{
++	u32 reg;
++	int nlw;
++	int rtl;
++
++	reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
++
++	nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
++	switch (nlw) {
++	case PCIE_MAX_LENGTH_WIDTH_X1:
++		rtl = 1677;
++		break;
++	case PCIE_MAX_LENGTH_WIDTH_X2:
++		rtl = 867;
++		break;
++	case PCIE_MAX_LENGTH_WIDTH_X4:
++		rtl = 462;
++		break;
++	case PCIE_MAX_LENGTH_WIDTH_X8:
++		rtl = 258;
++		break;
++	default:
++		rtl = 1677;
++		break;
++	}
++	reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
++	reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
++	reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
++	IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
++}
++
++/*
++ * Table 359 Enhanced Configuration Address Mapping1)
++ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
++ * Memory Address PCI Express Configuration Space
++ * A[(20+n-1):20] Bus Number 1 < n < 8
++ * A[19:15] Device Number
++ * A[14:12] Function Number
++ * A[11:8] Extended Register Number
++ * A[7:2] Register Number
++ * A[1:0] Along with size of the access, used to generate Byte Enables
++ * For VR9, only the address bits [22:0] are mapped to the configuration space:
++ * . Address bits [22:20] select the target bus (1-of-8)1)
++ * . Address bits [19:15] select the target device (1-of-32) on the bus
++ * . Address bits [14:12] select the target function (1-of-8) within the device.
++ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
++ * . Address bits [1:0] define the start byte location within the selected dword.
++ */
++static inline u32 pcie_bus_addr(u8 bus_num, u16 devfn, int where)
++{
++	u32 addr;
++	u8  bus;
++
++	if (!bus_num) {
++		/* type 0 */
++		addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
++	} else {
++		bus = bus_num;
++		/* type 1, only support 8 buses  */
++		addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
++			((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
++	}
++	return addr;
++}
++
++static int pcie_valid_config(int pcie_port, int bus, int dev)
++{
++	/* RC itself */
++	if ((bus == 0) && (dev == 0)) {
++		return 1;
++	}
++
++	/* No physical link */
++	if (!ifx_pcie_link_up(pcie_port)) {
++		return 0;
++	}
++
++	/* Bus zero only has RC itself
++	* XXX, check if EP will be integrated 
++	*/
++	if ((bus == 0) && (dev != 0)) {
++		return 0;
++	}
++
++	/* Maximum 8 buses supported for VRX */
++	if (bus > 9) {
++		return 0;
++	}
++
++	/* 
++	 * PCIe is PtP link, one bus only supports only one device 
++	 * except bus zero and PCIe switch which is virtual bus device
++	 * The following two conditions really depends on the system design
++	 * and attached the device.
++	 * XXX, how about more new switch
++	*/
++	if ((bus == 1) && (dev != 0)) {
++		return 0;
++	}
++
++	if ((bus >= 3) && (dev != 0)) {
++		return 0;
++	}
++	return 1;
++}
++
++static inline u32 ifx_pcie_cfg_rd(int pcie_port, u32 reg)
++{
++    return IFX_REG_R32((volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, u32 val)
++{
++    IFX_REG_W32( val, (volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static inline u32 ifx_pcie_rc_cfg_rd(int pcie_port, u32 reg)
++{
++    return IFX_REG_R32((volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, u32 val)
++{
++	IFX_REG_W32(val, (volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
++}
++
++u32 ifx_pcie_bus_enum_read_hack(int where, u32 value)
++{
++	u32 tvalue = value;
++
++	if (where == PCI_PRIMARY_BUS) {
++		u8 primary, secondary, subordinate;
++
++		primary = tvalue & 0xFF;
++		secondary = (tvalue >> 8) & 0xFF;
++		subordinate = (tvalue >> 16) & 0xFF;
++		primary += pcibios_1st_host_bus_nr();
++		secondary += pcibios_1st_host_bus_nr();
++		subordinate += pcibios_1st_host_bus_nr();
++		tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
++	}
++	return tvalue;
++}
++
++u32 ifx_pcie_bus_enum_write_hack(int where, u32 value)
++{
++    u32 tvalue = value;
++
++    if (where == PCI_PRIMARY_BUS) {
++        u8 primary, secondary, subordinate;
++
++        primary = tvalue & 0xFF;
++        secondary = (tvalue >> 8) & 0xFF;
++        subordinate = (tvalue >> 16) & 0xFF;
++        if (primary > 0 && primary != 0xFF) {
++            primary -= pcibios_1st_host_bus_nr();
++        }
++
++        if (secondary > 0 && secondary != 0xFF) {
++            secondary -= pcibios_1st_host_bus_nr();
++        }
++        if (subordinate > 0 && subordinate != 0xFF) {
++            subordinate -= pcibios_1st_host_bus_nr();
++        }
++        tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
++    }
++    else if (where == PCI_SUBORDINATE_BUS) {
++        u8 subordinate = tvalue & 0xFF;
++
++        subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
++        tvalue = subordinate;
++    }
++    return tvalue;
++}
++
++static int ifx_pcie_read_config(struct pci_bus *bus, u32 devfn,
++				int where, int size, u32 *value)
++{
++    u32 data = 0;
++    int bus_number = bus->number;
++    static const u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
++    int ret = PCIBIOS_SUCCESSFUL;
++    struct ifx_pci_controller *ctrl = bus->sysdata;
++    int pcie_port = ctrl->port;
++
++    if (unlikely(size != 1 && size != 2 && size != 4)){
++        ret = PCIBIOS_BAD_REGISTER_NUMBER;
++        goto out;
++    }
++
++    /* Make sure the address is aligned to natural boundary */
++    if (unlikely(((size - 1) & where))) {
++        ret = PCIBIOS_BAD_REGISTER_NUMBER;
++        goto out;
++    }
++
++    /* 
++     * If we are second controller, we have to cheat OS so that it assume 
++     * its bus number starts from 0 in host controller
++     */
++    bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
++
++    /* 
++     * We need to force the bus number to be zero on the root 
++     * bus. Linux numbers the 2nd root bus to start after all 
++     * busses on root 0. 
++     */ 
++    if (bus->parent == NULL) {
++        bus_number = 0; 
++    }
++
++    /* 
++     * PCIe only has a single device connected to it. It is 
++     * always device ID 0. Don't bother doing reads for other 
++     * device IDs on the first segment. 
++     */ 
++    if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
++        ret = PCIBIOS_FUNC_NOT_SUPPORTED;
++        goto out; 
++    }
++
++    if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
++        *value = 0xffffffff;
++        ret = PCIBIOS_DEVICE_NOT_FOUND;
++        goto out;
++    }
++
++    PCIE_IRQ_LOCK(ifx_pcie_lock);
++    if (bus_number == 0) { /* RC itself */
++        u32 t;
++
++        t = (where & ~3);
++        data = ifx_pcie_rc_cfg_rd(pcie_port, t);
++    } else {
++        u32 addr = pcie_bus_addr(bus_number, devfn, where);
++
++        data = ifx_pcie_cfg_rd(pcie_port, addr);
++    #ifdef CONFIG_IFX_PCIE_HW_SWAP
++            data = le32_to_cpu(data);
++    #endif /* CONFIG_IFX_PCIE_HW_SWAP */
++    }
++    /* To get a correct PCI topology, we have to restore the bus number to OS */
++    data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
++
++    PCIE_IRQ_UNLOCK(ifx_pcie_lock);
++
++    *value = (data >> (8 * (where & 3))) & mask[size & 7];
++out:
++    return ret;
++}
++
++static u32 ifx_pcie_size_to_value(int where, int size, u32 data, u32 value)
++{
++	u32 shift;
++	u32 tdata = data;
++
++	switch (size) {
++	case 1:
++		shift = (where & 0x3) << 3;
++		tdata &= ~(0xffU << shift);
++		tdata |= ((value & 0xffU) << shift);
++		break;
++	case 2:
++		shift = (where & 3) << 3;
++		tdata &= ~(0xffffU << shift);
++		tdata |= ((value & 0xffffU) << shift);
++		break;
++	case 4:
++		tdata = value;
++		break;
++	}
++	return tdata;
++}
++
++static int ifx_pcie_write_config(struct pci_bus *bus, u32 devfn,
++				int where, int size, u32 value)
++{
++	int bus_number = bus->number;
++	int ret = PCIBIOS_SUCCESSFUL;
++	struct ifx_pci_controller *ctrl = bus->sysdata;
++	int pcie_port = ctrl->port;
++	u32 tvalue = value;
++	u32 data;
++
++	/* Make sure the address is aligned to natural boundary */
++	if (unlikely(((size - 1) & where))) {
++		ret = PCIBIOS_BAD_REGISTER_NUMBER;
++		goto out;
++	}
++	/* 
++	* If we are second controller, we have to cheat OS so that it assume 
++	* its bus number starts from 0 in host controller
++	*/
++	bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
++
++	/* 
++	* We need to force the bus number to be zero on the root 
++	* bus. Linux numbers the 2nd root bus to start after all 
++	* busses on root 0. 
++	*/ 
++	if (bus->parent == NULL) {
++		bus_number = 0; 
++	}
++
++	if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
++		ret = PCIBIOS_DEVICE_NOT_FOUND;
++		goto out;
++	}
++
++	/* XXX, some PCIe device may need some delay */
++	PCIE_IRQ_LOCK(ifx_pcie_lock);
++
++	/* 
++	* To configure the correct bus topology using native way, we have to cheat Os so that
++	* it can configure the PCIe hardware correctly.
++	*/
++	tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
++
++	if (bus_number == 0) { /* RC itself */
++		u32 t;
++
++		t = (where & ~3);
++		data = ifx_pcie_rc_cfg_rd(pcie_port, t);
++
++		data = ifx_pcie_size_to_value(where, size, data, tvalue);
++
++		ifx_pcie_rc_cfg_wr(pcie_port, t, data);
++	} else {
++		u32 addr = pcie_bus_addr(bus_number, devfn, where);
++
++		data = ifx_pcie_cfg_rd(pcie_port, addr);
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++		data = le32_to_cpu(data);
++#endif
++
++		data = ifx_pcie_size_to_value(where, size, data, tvalue);
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++		data = cpu_to_le32(data);
++#endif
++		ifx_pcie_cfg_wr(pcie_port, addr, data);
++	}
++	PCIE_IRQ_UNLOCK(ifx_pcie_lock);
++out:
++	return ret;
++}
++
++static struct resource ifx_pcie_io_resource = {
++	.name	= "PCIe0 I/O space",
++	.start	= PCIE_IO_PHY_BASE,
++	.end	= PCIE_IO_PHY_END,
++	.flags	= IORESOURCE_IO,
++};
++
++static struct resource ifx_pcie_mem_resource = {
++	.name	= "PCIe0 Memory space",
++	.start	= PCIE_MEM_PHY_BASE,
++	.end	= PCIE_MEM_PHY_END,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct pci_ops ifx_pcie_ops = {
++	.read	= ifx_pcie_read_config,
++	.write	= ifx_pcie_write_config,
++};
++
++static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
++    {
++        .pcic = {
++            .pci_ops      = &ifx_pcie_ops,
++            .mem_resource = &ifx_pcie_mem_resource,
++            .io_resource  = &ifx_pcie_io_resource,
++         },
++         .port = IFX_PCIE_PORT0,
++    },
++};
++
++#ifdef IFX_PCIE_ERROR_INT
++
++static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id)
++{
++	struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
++	int pcie_port = ctrl->port;
++	u32 reg;
++
++	pr_debug("PCIe RC error intr %d\n", irq);
++	reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
++	reg &= PCIE_RC_CORE_COMBINED_INT;
++	IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
++
++	return IRQ_HANDLED;
++}
++
++static int
++pcie_rc_core_int_init(int pcie_port)
++{
++	int ret;
++
++	/* Enable core interrupt */
++	IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
++
++	/* Clear it first */
++	IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
++	ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, 0,
++		pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
++	if (ret)
++		printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
++
++	return ret;
++}
++#endif
++
++int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin)
++{
++	u32 irq_bit = 0;
++	int irq = 0;
++	struct ifx_pci_controller *ctrl = dev->bus->sysdata;
++	int pcie_port = ctrl->port;
++
++	printk("%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
++
++	if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
++		printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
++		return -1;
++	}
++
++	/* Pin index so minus one */
++	irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
++	irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
++	IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
++	IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
++	printk("%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
++	return irq;
++}
++
++int  ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
++{
++    u16 config;
++#ifdef IFX_PCIE_ERROR_INT
++    u32 dconfig; 
++    int pos;
++#endif
++
++    /* Enable reporting System errors and parity errors on all devices */ 
++    /* Enable parity checking and error reporting */ 
++    pci_read_config_word(dev, PCI_COMMAND, &config);
++    config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
++          PCI_COMMAND_FAST_BACK*/;
++    pci_write_config_word(dev, PCI_COMMAND, config);
++
++    if (dev->subordinate) {
++        /* Set latency timers on sub bridges */
++        pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
++        /* More bridge error detection */
++        pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
++        config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
++        pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
++    }
++#ifdef IFX_PCIE_ERROR_INT
++    /* Enable the PCIe normal error reporting */
++    pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
++    if (pos) {
++
++        /* Disable system error generation in response to error messages */
++        pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
++        config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
++        pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
++
++        /* Clear PCIE Capability's Device Status */
++        pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
++        pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
++
++        /* Update Device Control */ 
++        pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
++        /* Correctable Error Reporting */
++        config |= PCI_EXP_DEVCTL_CERE;
++        /* Non-Fatal Error Reporting */
++        config |= PCI_EXP_DEVCTL_NFERE;
++        /* Fatal Error Reporting */
++        config |= PCI_EXP_DEVCTL_FERE;
++        /* Unsupported Request */
++        config |= PCI_EXP_DEVCTL_URRE;
++        pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
++    }
++
++    /* Find the Advanced Error Reporting capability */
++    pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
++    if (pos) {
++        /* Clear Uncorrectable Error Status */ 
++        pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
++        pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
++        /* Enable reporting of all uncorrectable errors */
++        /* Uncorrectable Error Mask - turned on bits disable errors */
++        pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
++        /* 
++        * Leave severity at HW default. This only controls if 
++        * errors are reported as uncorrectable or 
++        * correctable, not if the error is reported. 
++        */ 
++        /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
++        /* Clear Correctable Error Status */
++        pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
++        pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
++        /* Enable reporting of all correctable errors */
++        /* Correctable Error Mask - turned on bits disable errors */
++        pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
++        /* Advanced Error Capabilities */ 
++        pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
++        /* ECRC Generation Enable */
++        if (dconfig & PCI_ERR_CAP_ECRC_GENC) {
++            dconfig |= PCI_ERR_CAP_ECRC_GENE;
++        }
++        /* ECRC Check Enable */
++        if (dconfig & PCI_ERR_CAP_ECRC_CHKC) {
++            dconfig |= PCI_ERR_CAP_ECRC_CHKE;
++        }
++        pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
++
++        /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
++        /* Enable Root Port's interrupt in response to error messages */
++        pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
++              PCI_ERR_ROOT_CMD_COR_EN |
++              PCI_ERR_ROOT_CMD_NONFATAL_EN |
++              PCI_ERR_ROOT_CMD_FATAL_EN); 
++        /* Clear the Root status register */
++        pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
++        pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
++    }
++#endif /* IFX_PCIE_ERROR_INT */
++    /* WAR, only 128 MRRS is supported, force all EPs to support this value */
++    pcie_set_readrq(dev, 128);
++    return 0;
++}
++
++static int
++pcie_rc_initialize(int pcie_port)
++{
++	int i;
++#define IFX_PCIE_PHY_LOOP_CNT  5
++
++	pcie_rcu_endian_setup(pcie_port);
++
++	pcie_ep_gpio_rst_init(pcie_port);
++
++	/* 
++	* XXX, PCIe elastic buffer bug will cause not to be detected. One more 
++	* reset PCIe PHY will solve this issue 
++	*/
++	for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
++		/* Disable PCIe PHY Analog part for sanity check */
++		pcie_phy_pmu_disable(pcie_port);
++
++		pcie_phy_rst_assert(pcie_port);
++		pcie_phy_rst_deassert(pcie_port);
++
++		/* Make sure PHY PLL is stable */
++		udelay(20);
++
++		/* PCIe Core reset enabled, low active, sw programmed */
++		pcie_core_rst_assert(pcie_port);
++
++		/* Put PCIe EP in reset status */
++		pcie_device_rst_assert(pcie_port);
++
++		/* PCI PHY & Core reset disabled, high active, sw programmed */
++		pcie_core_rst_deassert(pcie_port);
++
++		/* Already in a quiet state, program PLL, enable PHY, check ready bit */
++		pcie_phy_clock_mode_setup(pcie_port);
++
++		/* Enable PCIe PHY and Clock */
++		pcie_core_pmu_setup(pcie_port);
++
++		/* Clear status registers */
++		pcie_status_register_clear(pcie_port);
++
++#ifdef CONFIG_PCI_MSI
++		pcie_msi_init(pcie_port);
++#endif /* CONFIG_PCI_MSI */
++		pcie_rc_cfg_reg_setup(pcie_port);
++
++		/* Once link is up, break out */
++		if (pcie_app_loigc_setup(pcie_port) == 0)
++			break;
++	}
++	if (i >= IFX_PCIE_PHY_LOOP_CNT) {
++		printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
++		return -EIO;
++	}
++	/* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
++	pcie_replay_time_update(pcie_port);
++	return 0;
++}
++
++static int __init ifx_pcie_bios_init(void)
++{
++    void __iomem *io_map_base;
++    int pcie_port;
++    int startup_port;
++
++    /* Enable AHB Master/ Slave */
++    pcie_ahb_pmu_setup();
++
++    startup_port = IFX_PCIE_PORT0;
++    
++    for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
++	if (pcie_rc_initialize(pcie_port) == 0) {
++	    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", 
++                 __func__, PCIE_CFG_PORT_TO_BASE(pcie_port));
++            /* Otherwise, warning will pop up */
++            io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
++            if (io_map_base == NULL) {
++                IFX_PCIE_PRINT(PCIE_MSG_ERR, "%s io space ioremap failed\n", __func__);
++                return -ENOMEM;
++            }
++            ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
++
++            register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
++            /* XXX, clear error status */
++
++            IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: mem_resource 0x%p, io_resource 0x%p\n", 
++                              __func__, &ifx_pcie_controller[pcie_port].pcic.mem_resource, 
++                              &ifx_pcie_controller[pcie_port].pcic.io_resource);
++
++        #ifdef IFX_PCIE_ERROR_INT
++            pcie_rc_core_int_init(pcie_port);
++        #endif /* IFX_PCIE_ERROR_INT */
++        }
++    }
++
++    return 0;
++}
++arch_initcall(ifx_pcie_bios_init);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Chuanhua.Lei at infineon.com");
++MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module");
++MODULE_DESCRIPTION("Infineon builtin PCIe RC driver");
++
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie.h
+@@ -0,0 +1,135 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pcie.h
++** PROJECT      : IFX UEIP for VRX200
++** MODULES      : PCIe module
++**
++** DATE         : 02 Mar 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe Root Complex Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Version $Date        $Author         $Comment
++** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++#ifndef IFXMIPS_PCIE_H
++#define IFXMIPS_PCIE_H
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/interrupt.h>
++#include "ifxmips_pci_common.h"
++#include "ifxmips_pcie_reg.h"
++
++/*!
++ \defgroup IFX_PCIE  PCI Express bus driver module   
++ \brief  PCI Express IP module support VRX200 
++*/
++
++/*!
++ \defgroup IFX_PCIE_OS OS APIs
++ \ingroup IFX_PCIE
++ \brief PCIe bus driver OS interface functions
++*/
++
++/*!
++ \file ifxmips_pcie.h
++ \ingroup IFX_PCIE  
++ \brief header file for PCIe module common header file
++*/
++#define PCIE_IRQ_LOCK(lock) do {             \
++    unsigned long flags;                     \
++    spin_lock_irqsave(&(lock), flags);
++#define PCIE_IRQ_UNLOCK(lock)                \
++    spin_unlock_irqrestore(&(lock), flags);  \
++} while (0)
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++#define IRQF_SHARED SA_SHIRQ
++#endif
++
++#define PCIE_MSG_MSI        0x00000001
++#define PCIE_MSG_ISR        0x00000002
++#define PCIE_MSG_FIXUP      0x00000004
++#define PCIE_MSG_READ_CFG   0x00000008
++#define PCIE_MSG_WRITE_CFG  0x00000010
++#define PCIE_MSG_CFG        (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
++#define PCIE_MSG_REG        0x00000020
++#define PCIE_MSG_INIT       0x00000040
++#define PCIE_MSG_ERR        0x00000080
++#define PCIE_MSG_PHY        0x00000100
++#define PCIE_MSG_ANY        0x000001ff
++
++#define IFX_PCIE_PORT0      0
++#define IFX_PCIE_PORT1      1
++
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++#define IFX_PCIE_CORE_NR    2
++#else
++#define IFX_PCIE_CORE_NR    1
++#endif
++
++#define IFX_PCIE_ERROR_INT
++
++//#define IFX_PCIE_DBG
++
++#if defined(IFX_PCIE_DBG)
++#define IFX_PCIE_PRINT(_m, _fmt, args...) do {   \
++        ifx_pcie_debug((_fmt), ##args);          \
++} while (0)
++
++#define INLINE 
++#else
++#define IFX_PCIE_PRINT(_m, _fmt, args...)   \
++    do {} while(0)
++#define INLINE inline
++#endif
++
++struct ifx_pci_controller {
++	struct pci_controller   pcic;
++    
++	/* RC specific, per host bus information */
++	u32   port;  /* Port index, 0 -- 1st core, 1 -- 2nd core */
++};
++
++typedef struct ifx_pcie_ir_irq {
++    const unsigned int irq;
++    const char name[16];
++}ifx_pcie_ir_irq_t;
++
++typedef struct ifx_pcie_legacy_irq{
++    const u32 irq_bit;
++    const int irq;
++}ifx_pcie_legacy_irq_t;
++
++typedef struct ifx_pcie_irq {
++    ifx_pcie_ir_irq_t ir_irq;
++    ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
++}ifx_pcie_irq_t;
++
++extern u32 g_pcie_debug_flag;
++extern void ifx_pcie_debug(const char *fmt, ...);
++extern void pcie_phy_clock_mode_setup(int pcie_port);
++extern void pcie_msi_pic_init(int pcie_port);
++extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
++extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
++
++#define CONFIG_VR9
++
++#ifdef CONFIG_VR9
++#include "ifxmips_pcie_vr9.h"
++#elif defined (CONFIG_AR10)
++#include "ifxmips_pcie_ar10.h"
++#else
++#error "PCIE: platform not defined"
++#endif /* CONFIG_VR9 */
++
++#endif  /* IFXMIPS_PCIE_H */
++
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_ar10.h
+@@ -0,0 +1,290 @@
++/****************************************************************************
++                              Copyright (c) 2010
++                            Lantiq Deutschland GmbH
++                     Am Campeon 3; 85579 Neubiberg, Germany
++
++  For licensing information, see the file 'LICENSE' in the root folder of
++  this software module.
++
++ *****************************************************************************/
++/*!
++  \file ifxmips_pcie_ar10.h
++  \ingroup IFX_PCIE
++  \brief PCIe RC driver ar10 specific file
++*/
++
++#ifndef IFXMIPS_PCIE_AR10_H
++#define IFXMIPS_PCIE_AR10_H
++#ifndef AUTOCONF_INCLUDED
++#include <linux/config.h>
++#endif /* AUTOCONF_INCLUDED */
++#include <linux/types.h>
++#include <linux/delay.h>
++
++/* Project header file */
++#include <asm/ifx/ifx_types.h>
++#include <asm/ifx/ifx_pmu.h>
++#include <asm/ifx/ifx_gpio.h>
++#include <asm/ifx/ifx_ebu_led.h>
++
++static inline void pcie_ep_gpio_rst_init(int pcie_port)
++{
++    ifx_ebu_led_enable();
++    if (pcie_port == 0) {
++        ifx_ebu_led_set_data(11, 1);        
++    }
++    else {
++        ifx_ebu_led_set_data(12, 1);  
++    }
++}
++
++static inline void pcie_ahb_pmu_setup(void) 
++{
++    /* XXX, moved to CGU to control AHBM */
++}
++
++static inline void pcie_rcu_endian_setup(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++    /* Inbound, big endian */
++    reg |= IFX_RCU_BE_AHB4S;
++    if (pcie_port == 0) {
++        reg |= IFX_RCU_BE_PCIE0M;
++
++    #ifdef CONFIG_IFX_PCIE_HW_SWAP
++        /* Outbound, software swap needed */
++        reg |= IFX_RCU_BE_AHB3M;
++        reg &= ~IFX_RCU_BE_PCIE0S;
++    #else
++        /* Outbound little endian  */
++        reg &= ~IFX_RCU_BE_AHB3M;
++        reg &= ~IFX_RCU_BE_PCIE0S;
++    #endif
++    }
++    else {
++        reg |= IFX_RCU_BE_PCIE1M;
++    #ifdef CONFIG_IFX_PCIE1_HW_SWAP
++        /* Outbound, software swap needed */
++        reg |= IFX_RCU_BE_AHB3M;
++        reg &= ~IFX_RCU_BE_PCIE1S;
++    #else
++        /* Outbound little endian  */
++        reg &= ~IFX_RCU_BE_AHB3M;
++        reg &= ~IFX_RCU_BE_PCIE1S;
++    #endif
++    }
++
++    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
++}
++
++static inline void pcie_phy_pmu_enable(int pcie_port)
++{
++    if (pcie_port == 0) { /* XXX, should use macro*/
++        PCIE0_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++    }
++    else {
++        PCIE1_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++    }
++}
++
++static inline void pcie_phy_pmu_disable(int pcie_port)
++{
++    if (pcie_port == 0) { /* XXX, should use macro*/
++        PCIE0_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++    }
++    else {
++        PCIE1_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++    }
++}
++
++static inline void pcie_pdi_big_endian(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++    if (pcie_port == 0) {
++        /* Config AHB->PCIe and PDI endianness */
++        reg |= IFX_RCU_BE_PCIE0_PDI;
++    }
++    else {
++        /* Config AHB->PCIe and PDI endianness */
++        reg |= IFX_RCU_BE_PCIE1_PDI;
++    }
++    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++}
++
++static inline void pcie_pdi_pmu_enable(int pcie_port)
++{
++    if (pcie_port == 0) {
++        /* Enable PDI to access PCIe PHY register */
++        PDI0_PMU_SETUP(IFX_PMU_ENABLE);
++    }
++    else {
++        PDI1_PMU_SETUP(IFX_PMU_ENABLE);
++    }
++}
++
++static inline void pcie_core_rst_assert(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++
++    /* Reset Core, bit 22 */
++    if (pcie_port == 0) {
++        reg |= 0x00400000;
++    }
++    else {
++        reg |= 0x08000000; /* Bit 27 */
++    }
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_core_rst_deassert(int pcie_port)
++{
++    u32 reg;
++
++    /* Make sure one micro-second delay */
++    udelay(1);
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    if (pcie_port == 0) {
++        reg &= ~0x00400000; /* bit 22 */
++    }
++    else {
++        reg &= ~0x08000000; /* Bit 27 */
++    }
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_assert(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    if (pcie_port == 0) {
++        reg |= 0x00001000; /* Bit 12 */
++    }
++    else {
++        reg |= 0x00002000; /* Bit 13 */
++    }
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_deassert(int pcie_port)
++{
++    u32 reg;
++
++    /* Make sure one micro-second delay */
++    udelay(1);
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    if (pcie_port == 0) {
++        reg &= ~0x00001000; /* Bit 12 */
++    }
++    else {
++        reg &= ~0x00002000; /* Bit 13 */
++    }
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_device_rst_assert(int pcie_port)
++{
++    if (pcie_port == 0) {
++        ifx_ebu_led_set_data(11, 0);
++    }
++    else {
++        ifx_ebu_led_set_data(12, 0);
++    }
++}
++
++static inline void pcie_device_rst_deassert(int pcie_port)
++{
++    mdelay(100);
++    if (pcie_port == 0) {
++        ifx_ebu_led_set_data(11, 1);
++    }
++    else {
++        ifx_ebu_led_set_data(12, 1);
++    }
++    ifx_ebu_led_disable();
++}
++
++static inline void pcie_core_pmu_setup(int pcie_port)
++{
++    if (pcie_port == 0) {
++        PCIE0_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++    }
++    else {
++        PCIE1_CTRL_PMU_SETUP(IFX_PMU_ENABLE); 
++    }
++}
++
++static inline void pcie_msi_init(int pcie_port)
++{
++    pcie_msi_pic_init(pcie_port);
++    if (pcie_port == 0) {
++        MSI0_PMU_SETUP(IFX_PMU_ENABLE);
++    }
++    else {
++        MSI1_PMU_SETUP(IFX_PMU_ENABLE);
++    }
++}
++
++static inline u32
++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
++{
++    u32 tbus_number = bus_number;
++
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++    if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
++        if (pcibios_host_nr() > 1) {
++            tbus_number -= pcibios_1st_host_bus_nr();
++        }        
++    }
++#endif /* CONFIG_IFX_PCI */
++    return tbus_number;
++}
++
++static inline u32
++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
++{
++    struct pci_dev *pdev;
++    u32 tvalue = value;
++
++    /* Sanity check */
++    pdev = pci_get_slot(bus, devfn);
++    if (pdev == NULL) {
++        return tvalue;
++    }
++
++    /* Only care about PCI bridge */
++    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
++        return tvalue;
++    }
++
++    if (read) { /* Read hack */
++    #ifdef CONFIG_IFX_PCIE_2ND_CORE
++        if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
++            if (pcibios_host_nr() > 1) {
++                tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
++            }
++        }
++    #endif /* CONFIG_IFX_PCIE_2ND_CORE */
++    }
++    else { /* Write hack */
++    #ifdef CONFIG_IFX_PCIE_2ND_CORE
++        if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
++            if (pcibios_host_nr() > 1) {
++                tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
++            }
++        }
++    #endif
++    }
++    return tvalue;
++}
++
++#endif /* IFXMIPS_PCIE_AR10_H */
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_msi.c
+@@ -0,0 +1,392 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pcie_msi.c
++** PROJECT      : IFX UEIP for VRX200
++** MODULES      : PCI MSI sub module
++**
++** DATE         : 02 Mar 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe MSI Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Date        $Author         $Comment
++** 02 Mar,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++/*!
++ \defgroup IFX_PCIE_MSI MSI OS APIs
++ \ingroup IFX_PCIE
++ \brief PCIe bus driver OS interface functions
++*/
++
++/*!
++ \file ifxmips_pcie_msi.c
++ \ingroup IFX_PCIE 
++ \brief PCIe MSI OS interface file
++*/
++
++#ifndef AUTOCONF_INCLUDED
++#include <linux/config.h>
++#endif /* AUTOCONF_INCLUDED */
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/kernel_stat.h>
++#include <linux/pci.h>
++#include <linux/msi.h>
++#include <linux/module.h>
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++#include <asm/traps.h>
++
++#include <asm/ifx/ifx_types.h>
++#include <asm/ifx/ifx_regs.h>
++#include <asm/ifx/common_routines.h>
++#include <asm/ifx/irq.h>
++
++#include "ifxmips_pcie_reg.h"
++#include "ifxmips_pcie.h"
++
++#define IFX_MSI_IRQ_NUM    16
++
++enum {
++    IFX_PCIE_MSI_IDX0 = 0,
++    IFX_PCIE_MSI_IDX1,
++    IFX_PCIE_MSI_IDX2,
++    IFX_PCIE_MSI_IDX3,
++};
++
++typedef struct ifx_msi_irq_idx {
++    const int irq;
++    const int idx;
++}ifx_msi_irq_idx_t;
++
++struct ifx_msi_pic {
++    volatile u32  pic_table[IFX_MSI_IRQ_NUM];
++    volatile u32  pic_endian;    /* 0x40  */
++};
++typedef struct ifx_msi_pic *ifx_msi_pic_t;
++
++typedef struct ifx_msi_irq {
++    const volatile ifx_msi_pic_t msi_pic_p;
++    const u32 msi_phy_base;
++    const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM];
++    /*
++     * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is 
++     * in use.
++     */
++    u16 msi_free_irq_bitmask;
++
++    /*
++     * Each bit in msi_multiple_irq_bitmask tells that the device using 
++     * this bit in msi_free_irq_bitmask is also using the next bit. This 
++     * is used so we can disable all of the MSI interrupts when a device 
++     * uses multiple.
++     */
++    u16 msi_multiple_irq_bitmask;
++}ifx_msi_irq_t;
++
++static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = {
++    {
++        .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE,
++        .msi_phy_base = PCIE_MSI_PHY_BASE,
++        .msi_irq_idx = {
++            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++        },
++        .msi_free_irq_bitmask = 0,
++        .msi_multiple_irq_bitmask= 0,
++    },
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++    {
++        .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE,
++        .msi_phy_base = PCIE1_MSI_PHY_BASE,
++        .msi_irq_idx = {
++            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++        },
++        .msi_free_irq_bitmask = 0,
++        .msi_multiple_irq_bitmask= 0,
++
++    },
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++};
++
++/* 
++ * This lock controls updates to msi_free_irq_bitmask, 
++ * msi_multiple_irq_bitmask and pic register settting
++ */ 
++static DEFINE_SPINLOCK(ifx_pcie_msi_lock);
++
++void pcie_msi_pic_init(int pcie_port)
++{
++    spin_lock(&ifx_pcie_msi_lock);
++    msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN;
++    spin_unlock(&ifx_pcie_msi_lock);
++}
++
++/** 
++ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
++ * \brief Called when a driver request MSI interrupts instead of the 
++ * legacy INT A-D. This routine will allocate multiple interrupts 
++ * for MSI devices that support them. A device can override this by 
++ * programming the MSI control bits [6:4] before calling 
++ * pci_enable_msi(). 
++ * 
++ * \param[in] pdev   Device requesting MSI interrupts 
++ * \param[in] desc   MSI descriptor 
++ * 
++ * \return   -EINVAL Invalid pcie root port or invalid msi bit
++ * \return    0        OK
++ * \ingroup IFX_PCIE_MSI
++ */
++int 
++arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
++{
++    int  irq, pos;
++    u16  control;
++    int  irq_idx;
++    int  irq_step;
++    int configured_private_bits;
++    int request_private_bits;
++    struct msi_msg msg;
++    u16 search_mask;
++    struct ifx_pci_controller *ctrl = pdev->bus->sysdata;
++    int pcie_port = ctrl->port;
++
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev));
++
++    /* XXX, skip RC MSI itself */
++    if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
++        IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__);
++        return -EINVAL;
++    }
++
++    /*
++     * Read the MSI config to figure out how many IRQs this device 
++     * wants.  Most devices only want 1, which will give 
++     * configured_private_bits and request_private_bits equal 0. 
++     */
++    pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control);
++
++    /*
++     * If the number of private bits has been configured then use 
++     * that value instead of the requested number. This gives the 
++     * driver the chance to override the number of interrupts 
++     * before calling pci_enable_msi(). 
++     */
++    configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; 
++    if (configured_private_bits == 0) {
++        /* Nothing is configured, so use the hardware requested size */
++        request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
++    }
++    else {
++        /*
++         * Use the number of configured bits, assuming the 
++         * driver wanted to override the hardware request 
++         * value.
++         */
++        request_private_bits = configured_private_bits;
++    }
++
++    /*
++     * The PCI 2.3 spec mandates that there are at most 32
++     * interrupts. If this device asks for more, only give it one.
++     */
++    if (request_private_bits > 5) {
++        request_private_bits = 0;
++    }
++again:
++    /*
++     * The IRQs have to be aligned on a power of two based on the
++     * number being requested.
++     */
++    irq_step = (1 << request_private_bits);
++
++    /* Mask with one bit for each IRQ */
++    search_mask = (1 << irq_step) - 1;
++
++    /*
++     * We're going to search msi_free_irq_bitmask_lock for zero 
++     * bits. This represents an MSI interrupt number that isn't in 
++     * use.
++     */
++    spin_lock(&ifx_pcie_msi_lock);
++    for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) {
++        if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) {
++            msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; 
++            msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos;
++            break; 
++        }
++    }
++    spin_unlock(&ifx_pcie_msi_lock); 
++
++    /* Make sure the search for available interrupts didn't fail */ 
++    if (pos >= IFX_MSI_IRQ_NUM) {
++        if (request_private_bits) {
++            IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free "
++                  "interrupts, trying just one", __func__, 1 << request_private_bits);
++            request_private_bits = 0;
++            goto again;
++        }
++        else {
++            printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__);
++            return -EINVAL;
++        }
++    } 
++    irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq;
++    irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx;
++
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx);
++
++    /*
++     * Initialize MSI. This has to match the memory-write endianess from the device 
++     * Address bits [23:12]
++     */
++    spin_lock(&ifx_pcie_msi_lock); 
++    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) |
++                    SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) |
++                    SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
++
++    /* Enable this entry */
++    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE;
++    spin_unlock(&ifx_pcie_msi_lock);
++
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n",
++        pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]);
++
++    /* Update the number of IRQs the device has available to it */
++    control &= ~PCI_MSI_FLAGS_QSIZE;
++    control |= (request_private_bits << 4);
++    pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control);
++
++    set_irq_msi(irq, desc);
++    msg.address_hi = 0x0;
++    msg.address_lo = msi_irqs[pcie_port].msi_phy_base;
++    msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data);
++
++    write_msi_msg(irq, &msg);
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
++    return 0;
++}
++
++static int
++pcie_msi_irq_to_port(unsigned int irq, int *port)
++{
++    int ret = 0;
++
++    if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 ||
++        irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) {
++        *port = IFX_PCIE_PORT0;
++    }
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++    else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 ||
++        irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) {
++        *port = IFX_PCIE_PORT1;
++    }
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++    else {
++        printk(KERN_ERR "%s: Attempted to teardown illegal " 
++            "MSI interrupt (%d)\n", __func__, irq);
++        ret = -EINVAL;
++    }
++    return ret;
++}
++
++/** 
++ * \fn void arch_teardown_msi_irq(unsigned int irq)
++ * \brief Called when a device no longer needs its MSI interrupts. All 
++ * MSI interrupts for the device are freed. 
++ * 
++ * \param irq   The devices first irq number. There may be multple in sequence.
++ * \return none
++ * \ingroup IFX_PCIE_MSI
++ */
++void 
++arch_teardown_msi_irq(unsigned int irq)
++{
++    int pos;
++    int number_irqs; 
++    u16 bitmask;
++    int pcie_port;
++
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__);
++
++    BUG_ON(irq > INT_NUM_IM4_IRL31);
++
++    if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) {
++        return;
++    }
++
++    /* Shift the mask to the correct bit location, not always correct 
++     * Probally, the first match will be chosen.
++     */
++    for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) {
++        if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) 
++            && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) {
++            break;
++        }
++    }
++    if (pos >= IFX_MSI_IRQ_NUM) {
++        printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__);
++        return;
++    }
++    spin_lock(&ifx_pcie_msi_lock);
++    /* Disable this entry */
++    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE;
++    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA);
++    spin_unlock(&ifx_pcie_msi_lock); 
++    /*
++     * Count the number of IRQs we need to free by looking at the
++     * msi_multiple_irq_bitmask. Each bit set means that the next
++     * IRQ is also owned by this device.
++     */ 
++    number_irqs = 0; 
++    while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && 
++        (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) {
++        number_irqs++;
++    }
++    number_irqs++;
++
++    /* Mask with one bit for each IRQ */
++    bitmask = (1 << number_irqs) - 1;
++
++    bitmask <<= pos;
++    if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) {
++        printk(KERN_ERR "%s: Attempted to teardown MSI "
++             "interrupt (%d) not in use\n", __func__, irq);
++        return;
++    }
++    /* Checks are done, update the in use bitmask */
++    spin_lock(&ifx_pcie_msi_lock);
++    msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask;
++    msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1);
++    spin_unlock(&ifx_pcie_msi_lock);
++    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
++}
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Chuanhua.Lei at infineon.com");
++MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
++MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
++
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_phy.c
+@@ -0,0 +1,478 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pcie_phy.c
++** PROJECT      : IFX UEIP for VRX200
++** MODULES      : PCIe PHY sub module
++**
++** DATE         : 14 May 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe Root Complex Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Version $Date        $Author         $Comment
++** 0.0.1    14 May,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++/*!
++ \file ifxmips_pcie_phy.c
++ \ingroup IFX_PCIE  
++ \brief PCIe PHY PLL register programming source file
++*/
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <asm/paccess.h>
++#include <linux/delay.h>
++
++#include "ifxmips_pcie_reg.h"
++#include "ifxmips_pcie.h"
++
++/* PCIe PDI only supports 16 bit operation */
++
++#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \
++    ((*(volatile u16 *) (__addr)) = (__data))
++    
++#define IFX_PCIE_PHY_REG_READ16(__addr)  \
++    (*(volatile u16 *) (__addr))
++
++#define IFX_PCIE_PHY_REG16(__addr)   \
++    (*(volatile u16 *) (__addr))
++
++#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \
++    u16 read_data;                                    \
++    u16 write_data;                                   \
++    read_data = IFX_PCIE_PHY_REG_READ16((__reg));      \
++    write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\
++    IFX_PCIE_PHY_REG_WRITE16((__reg), write_data);               \
++} while (0)
++
++#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */
++
++//#define IFX_PCI_PHY_REG_DUMP
++
++#ifdef IFX_PCI_PHY_REG_DUMP
++static void
++pcie_phy_reg_dump(int pcie_port) 
++{
++    printk("PLL REGFILE\n");
++    printk("PCIE_PHY_PLL_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL1(pcie_port)));
++    printk("PCIE_PHY_PLL_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL2(pcie_port)));
++    printk("PCIE_PHY_PLL_CTRL3    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL3(pcie_port)));
++    printk("PCIE_PHY_PLL_CTRL4    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL4(pcie_port)));
++    printk("PCIE_PHY_PLL_CTRL5    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL5(pcie_port)));
++    printk("PCIE_PHY_PLL_CTRL6    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL6(pcie_port)));
++    printk("PCIE_PHY_PLL_CTRL7    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL7(pcie_port)));
++    printk("PCIE_PHY_PLL_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL1(pcie_port)));
++    printk("PCIE_PHY_PLL_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL2(pcie_port)));
++    printk("PCIE_PHY_PLL_A_CTRL3  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL3(pcie_port)));
++    printk("PCIE_PHY_PLL_STATUS   0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)));
++
++    printk("TX1 REGFILE\n");
++    printk("PCIE_PHY_TX1_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL1(pcie_port)));
++    printk("PCIE_PHY_TX1_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL2(pcie_port)));
++    printk("PCIE_PHY_TX1_CTRL3    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL3(pcie_port)));
++    printk("PCIE_PHY_TX1_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL1(pcie_port)));
++    printk("PCIE_PHY_TX1_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL2(pcie_port)));
++    printk("PCIE_PHY_TX1_MOD1     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD1(pcie_port)));
++    printk("PCIE_PHY_TX1_MOD2     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD2(pcie_port)));
++    printk("PCIE_PHY_TX1_MOD3     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD3(pcie_port)));
++
++    printk("TX2 REGFILE\n");
++    printk("PCIE_PHY_TX2_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL1(pcie_port)));
++    printk("PCIE_PHY_TX2_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL2(pcie_port)));
++    printk("PCIE_PHY_TX2_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL1(pcie_port)));
++    printk("PCIE_PHY_TX2_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL2(pcie_port)));
++    printk("PCIE_PHY_TX2_MOD1     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD1(pcie_port)));
++    printk("PCIE_PHY_TX2_MOD2     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD2(pcie_port)));
++    printk("PCIE_PHY_TX2_MOD3     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD3(pcie_port)));
++
++    printk("RX1 REGFILE\n");
++    printk("PCIE_PHY_RX1_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL1(pcie_port)));
++    printk("PCIE_PHY_RX1_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL2(pcie_port)));
++    printk("PCIE_PHY_RX1_CDR      0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CDR(pcie_port)));
++    printk("PCIE_PHY_RX1_EI       0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_EI(pcie_port)));
++    printk("PCIE_PHY_RX1_A_CTRL   0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_A_CTRL(pcie_port)));
++}
++#endif /* IFX_PCI_PHY_REG_DUMP */
++
++static void
++pcie_phy_comm_setup(int pcie_port)
++{
++   /* PLL Setting */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
++
++    /* increase the bias reference voltage */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
++
++    /* Endcnt */
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
++
++    /* force */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
++
++    /* predrv_ser_en */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
++
++    /* ctrl_lim */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
++
++    /* ctrl */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
++
++    /* predrv_ser_en */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
++
++    /* RTERM*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
++
++    /* Improved 100MHz clock output  */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
++
++    /* Reduced CDR BW to avoid glitches */
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
++}
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++static void 
++pcie_phy_36mhz_mode_setup(int pcie_port) 
++{
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++#ifdef IFX_PCI_PHY_REG_DUMP
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
++    pcie_phy_reg_dump(pcie_port);
++#endif
++
++    /* en_ext_mmd_div_ratio */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++    /* ext_mmd_div_ratio*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++    /* pll_ensdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++    /* en_const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++    /* mmd */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++    /* lf_mode */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++    /* const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++    /* const sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++    /* pllmod */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
++
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE
++static void 
++pcie_phy_36mhz_ssc_mode_setup(int pcie_port) 
++{
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++#ifdef IFX_PCI_PHY_REG_DUMP
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
++    pcie_phy_reg_dump(pcie_port);
++#endif
++
++    /* PLL Setting */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
++
++    /* Increase the bias reference voltage */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
++
++    /* Endcnt */
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
++
++    /* Force */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
++
++    /* Predrv_ser_en */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
++
++    /* ctrl_lim */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
++
++    /* ctrl */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
++
++    /* predrv_ser_en */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
++
++    /* RTERM*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
++
++    /* en_ext_mmd_div_ratio */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++    /* ext_mmd_div_ratio*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++    /* pll_ensdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400);
++
++    /* en_const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++    /* mmd */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++    /* lf_mode */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++    /* const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100);
++    /* const sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++    /* pllmod */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF);
++
++    /* improved 100MHz clock output  */
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
++
++    /* reduced CDR BW to avoid glitches */
++    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
++    
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE
++static void 
++pcie_phy_25mhz_mode_setup(int pcie_port) 
++{
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++#ifdef IFX_PCI_PHY_REG_DUMP
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
++    pcie_phy_reg_dump(pcie_port);
++#endif
++    /* en_const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++    /* pll_ensdm */    
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200);
++
++    /* en_ext_mmd_div_ratio*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002);
++
++    /* ext_mmd_div_ratio*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070);
++
++    /* mmd */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000);
++
++    /* lf_mode */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000);
++
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE
++static void 
++pcie_phy_100mhz_mode_setup(int pcie_port) 
++{
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++#ifdef IFX_PCI_PHY_REG_DUMP
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
++    pcie_phy_reg_dump(pcie_port);
++#endif 
++    /* en_ext_mmd_div_ratio */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++    /* ext_mmd_div_ratio*/
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++    /* pll_ensdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++    /* en_const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++    /* mmd */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++    /* lf_mode */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++    /* const_sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++    /* const sdm */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++    /* pllmod */
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
++
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */
++
++static int
++pcie_phy_wait_startup_ready(int pcie_port)
++{
++    int i;
++
++    for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) {
++        if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) {
++            break;
++        }
++        udelay(10);
++    }
++    if (i >= IFX_PCIE_PLL_TIMEOUT) {
++        printk(KERN_ERR "%s PLL Link timeout\n", __func__);
++        return -1;
++    }
++    return 0;
++}
++
++static void 
++pcie_phy_load_enable(int pcie_port, int slice) 
++{
++    /* Set the load_en of tx/rx slice to '1' */
++    switch (slice) {
++        case 1:
++            IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010);
++            break;
++        case 2:
++            IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010);
++            break;
++        case 3:
++            IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002);
++            break;
++    }
++}
++
++static void 
++pcie_phy_load_disable(int pcie_port, int slice) 
++{ 
++    /* set the load_en of tx/rx slice to '0' */ 
++    switch (slice) {
++        case 1:
++            IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010);
++            break;
++        case 2:
++            IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010);
++            break;
++        case 3: 
++            IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002);
++            break;
++    }
++}
++
++static void 
++pcie_phy_load_war(int pcie_port)
++{
++    int slice;
++
++    for (slice = 1; slice < 4; slice++) {
++        pcie_phy_load_enable(pcie_port, slice);
++        udelay(1);
++        pcie_phy_load_disable(pcie_port, slice);
++    }
++}
++
++static void 
++pcie_phy_tx2_modulation(int pcie_port)
++{
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF);
++    mdelay(1);
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF);
++}
++
++static void 
++pcie_phy_tx1_modulation(int pcie_port)
++{
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF);
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF);
++    mdelay(1);
++    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF);
++}
++
++static void
++pcie_phy_tx_modulation_war(int pcie_port)
++{
++    int i;
++
++#define PCIE_PHY_MODULATION_NUM 5 
++    for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) {
++        pcie_phy_tx2_modulation(pcie_port);
++        pcie_phy_tx1_modulation(pcie_port);
++    }
++#undef PCIE_PHY_MODULATION_NUM
++}
++
++void
++pcie_phy_clock_mode_setup(int pcie_port)
++{
++    pcie_pdi_big_endian(pcie_port);
++
++    /* Enable PDI to access PCIe PHY register */
++    pcie_pdi_pmu_enable(pcie_port);
++
++    /* Configure PLL and PHY clock */
++    pcie_phy_comm_setup(pcie_port);
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++    pcie_phy_36mhz_mode_setup(pcie_port);
++#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE)
++    pcie_phy_36mhz_ssc_mode_setup(pcie_port);
++#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE)
++    pcie_phy_25mhz_mode_setup(pcie_port);
++#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE)
++    pcie_phy_100mhz_mode_setup(pcie_port);
++#else
++    #error "PCIE PHY Clock Mode must be chosen first!!!!"
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
++
++    /* Enable PCIe PHY and make PLL setting take effect */
++    pcie_phy_pmu_enable(pcie_port);
++
++    /* Check if we are in startup_ready status */
++    pcie_phy_wait_startup_ready(pcie_port);
++
++    pcie_phy_load_war(pcie_port);
++
++    /* Apply TX modulation workarounds */
++    pcie_phy_tx_modulation_war(pcie_port);
++
++#ifdef IFX_PCI_PHY_REG_DUMP
++    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n");
++    pcie_phy_reg_dump(pcie_port);
++#endif
++}
++
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_pm.c
+@@ -0,0 +1,176 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pcie_pm.c
++** PROJECT      : IFX UEIP
++** MODULES      : PCIE Root Complex Driver
++**
++** DATE         : 21 Dec 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIE Root Complex Driver Power Managment
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Lantiq Deutschland GmbH
++**                      Am Campeon 3, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++**
++** HISTORY
++** $Date        $Author         $Comment
++** 21 Dec,2009   Lei Chuanhua    First UEIP release
++*******************************************************************************/
++/*!
++  \defgroup IFX_PCIE_PM Power Management functions
++  \ingroup IFX_PCIE
++  \brief IFX PCIE Root Complex Driver power management functions
++*/
++
++/*!
++ \file ifxmips_pcie_pm.c
++ \ingroup IFX_PCIE    
++ \brief source file for PCIE Root Complex Driver Power Management
++*/
++
++#ifndef EXPORT_SYMTAB
++#define EXPORT_SYMTAB
++#endif
++#ifndef AUTOCONF_INCLUDED
++#include <linux/config.h>
++#endif /* AUTOCONF_INCLUDED */
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <asm/system.h>
++
++/* Project header */
++#include <asm/ifx/ifx_types.h>
++#include <asm/ifx/ifx_regs.h>
++#include <asm/ifx/common_routines.h>
++#include <asm/ifx/ifx_pmcu.h>
++#include "ifxmips_pcie_pm.h"
++
++/** 
++ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
++ * \brief the callback function to request pmcu state in the power management hardware-dependent module
++ *
++ * \param pmcuState This parameter is a PMCU state.
++ *
++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
++ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
++ * \return IFX_PMCU_RETURN_DENIED  Not allowed to operate power state
++ * \ingroup IFX_PCIE_PM
++ */
++static IFX_PMCU_RETURN_t 
++ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
++{
++    switch(pmcuState) 
++    {
++        case IFX_PMCU_STATE_D0:
++            return IFX_PMCU_RETURN_SUCCESS;
++        case IFX_PMCU_STATE_D1: // Not Applicable
++            return IFX_PMCU_RETURN_DENIED;
++        case IFX_PMCU_STATE_D2: // Not Applicable
++            return IFX_PMCU_RETURN_DENIED;
++        case IFX_PMCU_STATE_D3: // Module clock gating and Power gating
++            return IFX_PMCU_RETURN_SUCCESS;
++        default:
++            return IFX_PMCU_RETURN_DENIED;
++    }
++}
++
++/** 
++ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
++ * \brief the callback function to get pmcu state in the power management hardware-dependent module
++
++ * \param pmcuState Pointer to return power state.
++ *
++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
++ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
++ * \return IFX_PMCU_RETURN_DENIED  Not allowed to operate power state
++ * \ingroup IFX_PCIE_PM
++ */
++static IFX_PMCU_RETURN_t 
++ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
++{
++    return IFX_PMCU_RETURN_SUCCESS;
++}
++
++/**
++ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
++ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
++ * 
++ * \param   pmcuModule      Module
++ * \param   newState        New state
++ * \param   oldState        Old state
++ * \return  IFX_PMCU_RETURN_SUCCESS Set Power State successfully
++ * \return  IFX_PMCU_RETURN_ERROR   Failed to set power state.
++ * \ingroup IFX_PCIE_PM
++ */
++static IFX_PMCU_RETURN_t 
++ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
++{
++    return IFX_PMCU_RETURN_SUCCESS;
++}
++
++/**
++ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
++ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
++ * 
++ * \param   pmcuModule      Module
++ * \param   newState        New state
++ * \param   oldState        Old state
++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
++ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
++ * \ingroup IFX_PCIE_PM
++ */
++static IFX_PMCU_RETURN_t 
++ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
++{
++    return IFX_PMCU_RETURN_SUCCESS;
++}
++
++/** 
++ * \fn static void ifx_pcie_pmcu_init(void)
++ * \brief Register with central PMCU module
++ * \return none
++ * \ingroup IFX_PCIE_PM
++ */
++void
++ifx_pcie_pmcu_init(void)
++{
++    IFX_PMCU_REGISTER_t pmcuRegister;
++
++    /* XXX, hook driver context */
++
++    /* State function register */
++    memset(&pmcuRegister, 0, sizeof(IFX_PMCU_REGISTER_t));
++    pmcuRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
++    pmcuRegister.pmcuModuleNr = 0;
++    pmcuRegister.ifx_pmcu_state_change = ifx_pcie_pmcu_state_change;
++    pmcuRegister.ifx_pmcu_state_get = ifx_pcie_pmcu_state_get;
++    pmcuRegister.pre = ifx_pcie_pmcu_prechange;
++    pmcuRegister.post= ifx_pcie_pmcu_postchange;
++    ifx_pmcu_register(&pmcuRegister); 
++}
++
++/** 
++ * \fn static void ifx_pcie_pmcu_exit(void)
++ * \brief Unregister with central PMCU module
++ *
++ * \return none
++ * \ingroup IFX_PCIE_PM
++ */
++void
++ifx_pcie_pmcu_exit(void)
++{
++    IFX_PMCU_REGISTER_t pmcuUnRegister;
++
++   /* XXX, hook driver context */
++   
++    pmcuUnRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
++    pmcuUnRegister.pmcuModuleNr = 0;
++    ifx_pmcu_unregister(&pmcuUnRegister);
++}
++
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_pm.h
+@@ -0,0 +1,36 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pcie_pm.h
++** PROJECT      : IFX UEIP
++** MODULES      : PCIe Root Complex Driver
++**
++** DATE         : 21 Dec 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe Root Complex Driver Power Managment
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Lantiq Deutschland GmbH
++**                      Am Campeon 3, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++**
++** HISTORY
++** $Date        $Author         $Comment
++** 21 Dec,2009   Lei Chuanhua    First UEIP release
++*******************************************************************************/
++/*!
++ \file ifxmips_pcie_pm.h
++ \ingroup IFX_PCIE 
++ \brief header file for PCIe Root Complex Driver Power Management
++*/
++
++#ifndef IFXMIPS_PCIE_PM_H
++#define IFXMIPS_PCIE_PM_H
++
++void ifx_pcie_pmcu_init(void);
++void ifx_pcie_pmcu_exit(void);
++
++#endif /* IFXMIPS_PCIE_PM_H  */
++
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_reg.h
+@@ -0,0 +1,1001 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pcie_reg.h
++** PROJECT      : IFX UEIP for VRX200
++** MODULES      : PCIe module
++**
++** DATE         : 02 Mar 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe Root Complex Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Version $Date        $Author         $Comment
++** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++#ifndef IFXMIPS_PCIE_REG_H
++#define IFXMIPS_PCIE_REG_H
++/*!
++ \file ifxmips_pcie_reg.h
++ \ingroup IFX_PCIE  
++ \brief header file for PCIe module register definition
++*/
++/* PCIe Address Mapping Base */
++#define PCIE_CFG_PHY_BASE        0x1D000000UL
++#define PCIE_CFG_BASE           (KSEG1 + PCIE_CFG_PHY_BASE)
++#define PCIE_CFG_SIZE           (8 * 1024 * 1024)
++
++#define PCIE_MEM_PHY_BASE        0x1C000000UL
++#define PCIE_MEM_BASE           (KSEG1 + PCIE_MEM_PHY_BASE)
++#define PCIE_MEM_SIZE           (16 * 1024 * 1024)
++#define PCIE_MEM_PHY_END        (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
++
++#define PCIE_IO_PHY_BASE         0x1D800000UL
++#define PCIE_IO_BASE            (KSEG1 + PCIE_IO_PHY_BASE)
++#define PCIE_IO_SIZE            (1 * 1024 * 1024)
++#define PCIE_IO_PHY_END         (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
++
++#define PCIE_RC_CFG_BASE        (KSEG1 + 0x1D900000)
++#define PCIE_APP_LOGIC_REG      (KSEG1 + 0x1E100900)
++#define PCIE_MSI_PHY_BASE        0x1F600000UL
++
++#define PCIE_PDI_PHY_BASE        0x1F106800UL
++#define PCIE_PDI_BASE           (KSEG1 + PCIE_PDI_PHY_BASE)
++#define PCIE_PDI_SIZE            0x400
++
++#define PCIE1_CFG_PHY_BASE        0x19000000UL
++#define PCIE1_CFG_BASE           (KSEG1 + PCIE1_CFG_PHY_BASE)
++#define PCIE1_CFG_SIZE           (8 * 1024 * 1024)
++
++#define PCIE1_MEM_PHY_BASE        0x18000000UL
++#define PCIE1_MEM_BASE           (KSEG1 + PCIE1_MEM_PHY_BASE)
++#define PCIE1_MEM_SIZE           (16 * 1024 * 1024)
++#define PCIE1_MEM_PHY_END        (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
++
++#define PCIE1_IO_PHY_BASE         0x19800000UL
++#define PCIE1_IO_BASE            (KSEG1 + PCIE1_IO_PHY_BASE)
++#define PCIE1_IO_SIZE            (1 * 1024 * 1024)
++#define PCIE1_IO_PHY_END         (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
++
++#define PCIE1_RC_CFG_BASE        (KSEG1 + 0x19900000)
++#define PCIE1_APP_LOGIC_REG      (KSEG1 + 0x1E100700)
++#define PCIE1_MSI_PHY_BASE        0x1F400000UL
++
++#define PCIE1_PDI_PHY_BASE        0x1F700400UL
++#define PCIE1_PDI_BASE           (KSEG1 + PCIE1_PDI_PHY_BASE)
++#define PCIE1_PDI_SIZE            0x400
++
++#define PCIE_CFG_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
++#define PCIE_MEM_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
++#define PCIE_IO_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
++#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
++#define PCIE_MEM_PHY_PORT_TO_END(X)  ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
++#define PCIE_IO_PHY_PORT_TO_BASE(X)  ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
++#define PCIE_IO_PHY_PORT_TO_END(X)   ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
++#define PCIE_APP_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
++#define PCIE_RC_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
++#define PCIE_PHY_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
++
++/* PCIe Application Logic Register */
++/* RC Core Control Register */
++#define PCIE_RC_CCR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
++/* This should be enabled after initializing configuratin registers
++ * Also should check link status retraining bit
++ */
++#define PCIE_RC_CCR_LTSSM_ENABLE             0x00000001    /* Enable LTSSM to continue link establishment */
++
++/* RC Core Debug Register */
++#define PCIE_RC_DR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
++#define PCIE_RC_DR_DLL_UP                    0x00000001  /* Data Link Layer Up */
++#define PCIE_RC_DR_CURRENT_POWER_STATE       0x0000000E  /* Current Power State */
++#define PCIE_RC_DR_CURRENT_POWER_STATE_S     1
++#define PCIE_RC_DR_CURRENT_LTSSM_STATE       0x000001F0  /* Current LTSSM State */
++#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S     4
++
++#define PCIE_RC_DR_PM_DEV_STATE              0x00000E00  /* Power Management D-State */
++#define PCIE_RC_DR_PM_DEV_STATE_S            9
++
++#define PCIE_RC_DR_PM_ENABLED                0x00001000  /* Power Management State from PMU */
++#define PCIE_RC_DR_PME_EVENT_ENABLED         0x00002000  /* Power Management Event Enable State */
++#define PCIE_RC_DR_AUX_POWER_ENABLED         0x00004000  /* Auxiliary Power Enable */
++
++/* Current Power State Definition */
++enum {
++    PCIE_RC_DR_D0 = 0,
++    PCIE_RC_DR_D1,   /* Not supported */
++    PCIE_RC_DR_D2,   /* Not supported */
++    PCIE_RC_DR_D3,
++    PCIE_RC_DR_UN,
++};
++
++/* PHY Link Status Register */
++#define PCIE_PHY_SR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
++#define PCIE_PHY_SR_PHY_LINK_UP              0x00000001   /* PHY Link Up/Down Indicator */
++
++/* Electromechanical Control Register */
++#define PCIE_EM_CR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
++#define PCIE_EM_CR_CARD_IS_PRESENT           0x00000001  /* Card Presence Detect State */
++#define PCIE_EM_CR_MRL_OPEN                  0x00000002  /* MRL Sensor State */
++#define PCIE_EM_CR_POWER_FAULT_SET           0x00000004  /* Power Fault Detected */
++#define PCIE_EM_CR_MRL_SENSOR_SET            0x00000008  /* MRL Sensor Changed */
++#define PCIE_EM_CR_PRESENT_DETECT_SET        0x00000010  /* Card Presense Detect Changed */
++#define PCIE_EM_CR_CMD_CPL_INT_SET           0x00000020  /* Command Complete Interrupt */
++#define PCIE_EM_CR_SYS_INTERLOCK_SET         0x00000040  /* System Electromechanical IterLock Engaged */
++#define PCIE_EM_CR_ATTENTION_BUTTON_SET      0x00000080  /* Attention Button Pressed */
++
++/* Interrupt Status Register */
++#define PCIE_IR_SR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
++#define PCIE_IR_SR_PME_CAUSE_MSI             0x00000002  /* MSI caused by PME */
++#define PCIE_IR_SR_HP_PME_WAKE_GEN           0x00000004  /* Hotplug PME Wake Generation */
++#define PCIE_IR_SR_HP_MSI                    0x00000008  /* Hotplug MSI */
++#define PCIE_IR_SR_AHB_LU_ERR                0x00000030  /* AHB Bridge Lookup Error Signals */
++#define PCIE_IR_SR_AHB_LU_ERR_S              4
++#define PCIE_IR_SR_INT_MSG_NUM               0x00003E00  /* Interrupt Message Number */
++#define PCIE_IR_SR_INT_MSG_NUM_S             9
++#define PCIE_IR_SR_AER_INT_MSG_NUM           0xF8000000  /* Advanced Error Interrupt Message Number */
++#define PCIE_IR_SR_AER_INT_MSG_NUM_S         27
++
++/* Message Control Register */
++#define PCIE_MSG_CR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
++#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG     0x00000001  /* Generate PME Turn Off Message */
++#define PCIE_MSG_CR_GEN_UNLOCK_MSG           0x00000002  /* Generate Unlock Message */
++
++#define PCIE_VDM_DR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
++
++/* Vendor-Defined Message Requester ID Register */
++#define PCIE_VDM_RID(X)                     (PCIE_APP_PORT_TO_BASE (X) + 0x38)
++#define PCIE_VDM_RID_VENROR_MSG_REQ_ID       0x0000FFFF
++#define PCIE_VDM_RID_VDMRID_S                0
++
++/* ASPM Control Register */
++#define PCIE_ASPM_CR(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
++#define PCIE_ASPM_CR_HOT_RST                 0x00000001  /* Hot Reset Request to the downstream device */
++#define PCIE_ASPM_CR_REQ_EXIT_L1             0x00000002  /* Request to Exit L1 */
++#define PCIE_ASPM_CR_REQ_ENTER_L1            0x00000004  /* Request to Enter L1 */
++
++/* Vendor Message DW0 Register */
++#define PCIE_VM_MSG_DW0(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
++#define PCIE_VM_MSG_DW0_TYPE                 0x0000001F  /* Message type */
++#define PCIE_VM_MSG_DW0_TYPE_S               0
++#define PCIE_VM_MSG_DW0_FORMAT               0x00000060  /* Format */
++#define PCIE_VM_MSG_DW0_FORMAT_S             5
++#define PCIE_VM_MSG_DW0_TC                   0x00007000  /* Traffic Class */
++#define PCIE_VM_MSG_DW0_TC_S                 12
++#define PCIE_VM_MSG_DW0_ATTR                 0x000C0000  /* Atrributes */
++#define PCIE_VM_MSG_DW0_ATTR_S               18
++#define PCIE_VM_MSG_DW0_EP_TLP               0x00100000  /* Poisoned TLP */
++#define PCIE_VM_MSG_DW0_TD                   0x00200000  /* TLP Digest */
++#define PCIE_VM_MSG_DW0_LEN                  0xFFC00000  /* Length */
++#define PCIE_VM_MSG_DW0_LEN_S                22
++
++/* Format Definition */
++enum {
++    PCIE_VM_MSG_FORMAT_00 = 0,  /* 3DW Hdr, no data*/
++    PCIE_VM_MSG_FORMAT_01,      /* 4DW Hdr, no data */
++    PCIE_VM_MSG_FORMAT_10,      /* 3DW Hdr, with data */
++    PCIE_VM_MSG_FORMAT_11,      /* 4DW Hdr, with data */
++};
++
++/* Traffic Class Definition */
++enum {
++    PCIE_VM_MSG_TC0 = 0,
++    PCIE_VM_MSG_TC1,
++    PCIE_VM_MSG_TC2,
++    PCIE_VM_MSG_TC3,
++    PCIE_VM_MSG_TC4,
++    PCIE_VM_MSG_TC5,
++    PCIE_VM_MSG_TC6,
++    PCIE_VM_MSG_TC7,
++};
++
++/* Attributes Definition */
++enum {
++    PCIE_VM_MSG_ATTR_00 = 0,   /* RO and No Snoop cleared */
++    PCIE_VM_MSG_ATTR_01,       /* RO cleared , No Snoop set */
++    PCIE_VM_MSG_ATTR_10,       /* RO set, No Snoop cleared*/
++    PCIE_VM_MSG_ATTR_11,       /* RO and No Snoop set */
++};
++
++/* Payload Size Definition */
++#define PCIE_VM_MSG_LEN_MIN  0
++#define PCIE_VM_MSG_LEN_MAX  1024
++
++/* Vendor Message DW1 Register */
++#define PCIE_VM_MSG_DW1(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
++#define PCIE_VM_MSG_DW1_FUNC_NUM            0x00000070  /* Function Number */
++#define PCIE_VM_MSG_DW1_FUNC_NUM_S          8
++#define PCIE_VM_MSG_DW1_CODE                0x00FF0000  /* Message Code */
++#define PCIE_VM_MSG_DW1_CODE_S              16
++#define PCIE_VM_MSG_DW1_TAG                 0xFF000000  /* Tag */
++#define PCIE_VM_MSG_DW1_TAG_S               24
++
++#define PCIE_VM_MSG_DW2(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
++#define PCIE_VM_MSG_DW3(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
++
++/* Vendor Message Request Register */
++#define PCIE_VM_MSG_REQR(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
++#define PCIE_VM_MSG_REQR_REQ                 0x00000001  /* Vendor Message Request */
++
++
++/* AHB Slave Side Band Control Register */
++#define PCIE_AHB_SSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
++#define PCIE_AHB_SSB_REQ_BCM                0x00000001 /* Slave Reques BCM filed */
++#define PCIE_AHB_SSB_REQ_EP                 0x00000002 /* Slave Reques EP filed */
++#define PCIE_AHB_SSB_REQ_TD                 0x00000004 /* Slave Reques TD filed */
++#define PCIE_AHB_SSB_REQ_ATTR               0x00000018 /* Slave Reques Attribute number */
++#define PCIE_AHB_SSB_REQ_ATTR_S             3
++#define PCIE_AHB_SSB_REQ_TC                 0x000000E0 /* Slave Request TC Field */
++#define PCIE_AHB_SSB_REQ_TC_S               5
++
++/* AHB Master SideBand Ctrl Register */
++#define PCIE_AHB_MSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
++#define PCIE_AHB_MSB_RESP_ATTR               0x00000003 /* Master Response Attribute number */
++#define PCIE_AHB_MSB_RESP_ATTR_S             0
++#define PCIE_AHB_MSB_RESP_BAD_EOT            0x00000004 /* Master Response Badeot filed */
++#define PCIE_AHB_MSB_RESP_BCM                0x00000008 /* Master Response BCM filed */
++#define PCIE_AHB_MSB_RESP_EP                 0x00000010 /* Master Response EP filed */
++#define PCIE_AHB_MSB_RESP_TD                 0x00000020 /* Master Response TD filed */
++#define PCIE_AHB_MSB_RESP_FUN_NUM            0x000003C0 /* Master Response Function number */
++#define PCIE_AHB_MSB_RESP_FUN_NUM_S          6
++
++/* AHB Control Register, fixed bus enumeration exception */
++#define PCIE_AHB_CTRL(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
++#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS     0x00000001 
++
++/* Interrupt Enalbe Register */
++#define PCIE_IRNEN(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
++#define PCIE_IRNCR(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
++#define PCIE_IRNICR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
++
++/* PCIe interrupt enable/control/capture register definition */
++#define PCIE_IRN_AER_REPORT                 0x00000001  /* AER Interrupt */
++#define PCIE_IRN_AER_MSIX                   0x00000002  /* Advanced Error MSI-X Interrupt */
++#define PCIE_IRN_PME                        0x00000004  /* PME Interrupt */
++#define PCIE_IRN_HOTPLUG                    0x00000008  /* Hotplug Interrupt */
++#define PCIE_IRN_RX_VDM_MSG                 0x00000010  /* Vendor-Defined Message Interrupt */
++#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG     0x00000020  /* Correctable Error Message Interrupt */
++#define PCIE_IRN_RX_NON_FATAL_ERR_MSG       0x00000040  /* Non-fatal Error Message */
++#define PCIE_IRN_RX_FATAL_ERR_MSG           0x00000080  /* Fatal Error Message */
++#define PCIE_IRN_RX_PME_MSG                 0x00000100  /* PME Message Interrupt */
++#define PCIE_IRN_RX_PME_TURNOFF_ACK         0x00000200  /* PME Turnoff Ack Message Interrupt */
++#define PCIE_IRN_AHB_BR_FATAL_ERR           0x00000400  /* AHB Fatal Error Interrupt */
++#define PCIE_IRN_LINK_AUTO_BW_STATUS        0x00000800  /* Link Auto Bandwidth Status Interrupt */
++#define PCIE_IRN_BW_MGT                     0x00001000  /* Bandwidth Managment Interrupt */
++#define PCIE_IRN_INTA                       0x00002000  /* INTA */
++#define PCIE_IRN_INTB                       0x00004000  /* INTB */
++#define PCIE_IRN_INTC                       0x00008000  /* INTC */
++#define PCIE_IRN_INTD                       0x00010000  /* INTD */
++#define PCIE_IRN_WAKEUP                     0x00020000  /* Wake up Interrupt */
++
++#define PCIE_RC_CORE_COMBINED_INT    (PCIE_IRN_AER_REPORT |  PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
++                                      PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
++                                      PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
++                                      PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
++                                      PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
++/* PCIe RC Configuration Register */
++#define PCIE_VDID(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
++
++/* Bit definition from pci_reg.h */
++#define PCIE_PCICMDSTS(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
++#define PCIE_CCRID(X)               (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
++#define PCIE_CLSLTHTBR(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
++/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
++#define PCIE_BAR0(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
++#define PCIE_BAR1(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
++
++#define PCIE_BNR(X)                 (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
++/* Bus Number Register bits */
++#define PCIE_BNR_PRIMARY_BUS_NUM             0x000000FF
++#define PCIE_BNR_PRIMARY_BUS_NUM_S           0
++#define PCIE_PNR_SECONDARY_BUS_NUM           0x0000FF00
++#define PCIE_PNR_SECONDARY_BUS_NUM_S         8
++#define PCIE_PNR_SUB_BUS_NUM                 0x00FF0000
++#define PCIE_PNR_SUB_BUS_NUM_S               16
++
++/* IO Base/Limit Register bits */
++#define PCIE_IOBLSECS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C)  /* RC only */
++#define PCIE_IOBLSECS_32BIT_IO_ADDR             0x00000001
++#define PCIE_IOBLSECS_IO_BASE_ADDR              0x000000F0
++#define PCIE_IOBLSECS_IO_BASE_ADDR_S            4
++#define PCIE_IOBLSECS_32BIT_IOLIMT              0x00000100
++#define PCIE_IOBLSECS_IO_LIMIT_ADDR             0x0000F000
++#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S           12
++
++/* Non-prefetchable Memory Base/Limit Register bit */
++#define PCIE_MBML(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20)  /* RC only */
++#define PCIE_MBML_MEM_BASE_ADDR                 0x0000FFF0
++#define PCIE_MBML_MEM_BASE_ADDR_S               4
++#define PCIE_MBML_MEM_LIMIT_ADDR                0xFFF00000
++#define PCIE_MBML_MEM_LIMIT_ADDR_S              20
++
++/* Prefetchable Memory Base/Limit Register bit */
++#define PCIE_PMBL(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24)  /* RC only */
++#define PCIE_PMBL_64BIT_ADDR                    0x00000001
++#define PCIE_PMBL_UPPER_12BIT                   0x0000FFF0
++#define PCIE_PMBL_UPPER_12BIT_S                 4
++#define PCIE_PMBL_E64MA                         0x00010000
++#define PCIE_PMBL_END_ADDR                      0xFFF00000
++#define PCIE_PMBL_END_ADDR_S                    20
++#define PCIE_PMBU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28)  /* RC only */
++#define PCIE_PMLU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C)  /* RC only */
++
++/* I/O Base/Limit Upper 16 bits register */
++#define PCIE_IO_BANDL(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30)  /* RC only */
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE        0x0000FFFF
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S      0
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT       0xFFFF0000
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S     16
++
++#define PCIE_CPR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
++#define PCIE_EBBAR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
++
++/* Interrupt and Secondary Bridge Control Register */
++#define PCIE_INTRBCTRL(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
++
++#define PCIE_INTRBCTRL_INT_LINE                 0x000000FF
++#define PCIE_INTRBCTRL_INT_LINE_S               0
++#define PCIE_INTRBCTRL_INT_PIN                  0x0000FF00
++#define PCIE_INTRBCTRL_INT_PIN_S                8
++#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE   0x00010000    /* #PERR */
++#define PCIE_INTRBCTRL_SERR_ENABLE              0x00020000    /* #SERR */
++#define PCIE_INTRBCTRL_ISA_ENABLE               0x00040000    /* ISA enable, IO 64KB only */
++#define PCIE_INTRBCTRL_VGA_ENABLE               0x00080000    /* VGA enable */
++#define PCIE_INTRBCTRL_VGA_16BIT_DECODE         0x00100000    /* VGA 16bit decode */
++#define PCIE_INTRBCTRL_RST_SECONDARY_BUS        0x00400000    /* Secondary bus rest, hot rest, 1ms */
++/* Others are read only */
++enum {
++    PCIE_INTRBCTRL_INT_NON = 0,
++    PCIE_INTRBCTRL_INTA,
++    PCIE_INTRBCTRL_INTB,
++    PCIE_INTRBCTRL_INTC,
++    PCIE_INTRBCTRL_INTD,
++};
++
++#define PCIE_PM_CAPR(X)                  (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
++
++/* Power Management Control and Status Register */
++#define PCIE_PM_CSR(X)                   (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
++
++#define PCIE_PM_CSR_POWER_STATE           0x00000003   /* Power State */
++#define PCIE_PM_CSR_POWER_STATE_S         0
++#define PCIE_PM_CSR_SW_RST                0x00000008   /* Soft Reset Enabled */
++#define PCIE_PM_CSR_PME_ENABLE            0x00000100   /* PME Enable */
++#define PCIE_PM_CSR_PME_STATUS            0x00008000   /* PME status */
++
++/* MSI Capability Register for EP */
++#define PCIE_MCAPR(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
++
++#define PCIE_MCAPR_MSI_CAP_ID             0x000000FF  /* MSI Capability ID */
++#define PCIE_MCAPR_MSI_CAP_ID_S           0
++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR       0x0000FF00  /* Next Capability Pointer */
++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S     8
++#define PCIE_MCAPR_MSI_ENABLE             0x00010000  /* MSI Enable */
++#define PCIE_MCAPR_MULTI_MSG_CAP          0x000E0000  /* Multiple Message Capable */
++#define PCIE_MCAPR_MULTI_MSG_CAP_S        17
++#define PCIE_MCAPR_MULTI_MSG_ENABLE       0x00700000  /* Multiple Message Enable */
++#define PCIE_MCAPR_MULTI_MSG_ENABLE_S     20
++#define PCIE_MCAPR_ADDR64_CAP             0X00800000  /* 64-bit Address Capable */
++
++/* MSI Message Address Register */
++#define PCIE_MA(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
++
++#define PCIE_MA_ADDR_MASK                 0xFFFFFFFC  /* Message Address */
++
++/* MSI Message Upper Address Register */
++#define PCIE_MUA(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
++
++/* MSI Message Data Register */
++#define PCIE_MD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
++
++#define PCIE_MD_DATA                      0x0000FFFF  /* Message Data */
++#define PCIE_MD_DATA_S                    0
++
++/* PCI Express Capability Register */
++#define PCIE_XCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
++
++#define PCIE_XCAP_ID                      0x000000FF  /* PCI Express Capability ID */
++#define PCIE_XCAP_ID_S                    0
++#define PCIE_XCAP_NEXT_CAP                0x0000FF00  /* Next Capability Pointer */
++#define PCIE_XCAP_NEXT_CAP_S              8
++#define PCIE_XCAP_VER                     0x000F0000  /* PCI Express Capability Version */
++#define PCIE_XCAP_VER_S                   16
++#define PCIE_XCAP_DEV_PORT_TYPE           0x00F00000  /* Device Port Type */
++#define PCIE_XCAP_DEV_PORT_TYPE_S         20
++#define PCIE_XCAP_SLOT_IMPLEMENTED        0x01000000  /* Slot Implemented */
++#define PCIE_XCAP_MSG_INT_NUM             0x3E000000  /* Interrupt Message Number */
++#define PCIE_XCAP_MSG_INT_NUM_S           25
++
++/* Device Capability Register */
++#define PCIE_DCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
++
++#define PCIE_DCAP_MAX_PAYLOAD_SIZE        0x00000007   /* Max Payload size */
++#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S      0
++#define PCIE_DCAP_PHANTOM_FUNC            0x00000018   /* Phanton Function, not supported */
++#define PCIE_DCAP_PHANTOM_FUNC_S          3
++#define PCIE_DCAP_EXT_TAG                 0x00000020   /* Extended Tag Field */
++#define PCIE_DCAP_EP_L0S_LATENCY          0x000001C0   /* EP L0s latency only */
++#define PCIE_DCAP_EP_L0S_LATENCY_S        6
++#define PCIE_DCAP_EP_L1_LATENCY           0x00000E00   /* EP L1 latency only */
++#define PCIE_DCAP_EP_L1_LATENCY_S         9
++#define PCIE_DCAP_ROLE_BASE_ERR_REPORT    0x00008000   /* Role Based ERR */
++
++/* Maximum payload size supported */
++enum {
++    PCIE_MAX_PAYLOAD_128 = 0,
++    PCIE_MAX_PAYLOAD_256,
++    PCIE_MAX_PAYLOAD_512,
++    PCIE_MAX_PAYLOAD_1024,
++    PCIE_MAX_PAYLOAD_2048,
++    PCIE_MAX_PAYLOAD_4096,
++};
++
++/* Device Control and Status Register */
++#define PCIE_DCTLSTS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
++
++#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN        0x00000001   /* COR-ERR */
++#define PCIE_DCTLSTS_NONFATAL_ERR_EN           0x00000002   /* Non-fatal ERR */
++#define PCIE_DCTLSTS_FATAL_ERR_EN              0x00000004   /* Fatal ERR */
++#define PCIE_DCTLSYS_UR_REQ_EN                 0x00000008   /* UR ERR */
++#define PCIE_DCTLSTS_RELAXED_ORDERING_EN       0x00000010   /* Enable relaxing ordering */
++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE          0x000000E0   /* Max payload mask */
++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S        5
++#define PCIE_DCTLSTS_EXT_TAG_EN                0x00000100   /* Extended tag field */
++#define PCIE_DCTLSTS_PHANTOM_FUNC_EN           0x00000200   /* Phantom Function Enable */
++#define PCIE_DCTLSTS_AUX_PM_EN                 0x00000400   /* AUX Power PM Enable */
++#define PCIE_DCTLSTS_NO_SNOOP_EN               0x00000800   /* Enable no snoop, except root port*/
++#define PCIE_DCTLSTS_MAX_READ_SIZE             0x00007000   /* Max Read Request size*/
++#define PCIE_DCTLSTS_MAX_READ_SIZE_S           12
++#define PCIE_DCTLSTS_CORRECTABLE_ERR           0x00010000   /* COR-ERR Detected */
++#define PCIE_DCTLSTS_NONFATAL_ERR              0x00020000   /* Non-Fatal ERR Detected */
++#define PCIE_DCTLSTS_FATAL_ER                  0x00040000   /* Fatal ERR Detected */
++#define PCIE_DCTLSTS_UNSUPPORTED_REQ           0x00080000   /* UR Detected */
++#define PCIE_DCTLSTS_AUX_POWER                 0x00100000   /* Aux Power Detected */
++#define PCIE_DCTLSTS_TRANSACT_PENDING          0x00200000   /* Transaction pending */
++
++#define PCIE_DCTLSTS_ERR_EN      (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
++                                  PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
++                                  PCIE_DCTLSYS_UR_REQ_EN)
++
++/* Link Capability Register */
++#define PCIE_LCAP(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
++#define PCIE_LCAP_MAX_LINK_SPEED               0x0000000F  /* Max link speed, 0x1 by default */
++#define PCIE_LCAP_MAX_LINK_SPEED_S             0
++#define PCIE_LCAP_MAX_LENGTH_WIDTH             0x000003F0  /* Maxium Length Width */
++#define PCIE_LCAP_MAX_LENGTH_WIDTH_S           4
++#define PCIE_LCAP_ASPM_LEVEL                   0x00000C00  /* Active State Link PM Support */
++#define PCIE_LCAP_ASPM_LEVEL_S                 10
++#define PCIE_LCAP_L0S_EIXT_LATENCY             0x00007000  /* L0s Exit Latency */
++#define PCIE_LCAP_L0S_EIXT_LATENCY_S           12
++#define PCIE_LCAP_L1_EXIT_LATENCY              0x00038000  /* L1 Exit Latency */
++#define PCIE_LCAP_L1_EXIT_LATENCY_S            15
++#define PCIE_LCAP_CLK_PM                       0x00040000  /* Clock Power Management */
++#define PCIE_LCAP_SDER                         0x00080000  /* Surprise Down Error Reporting */
++#define PCIE_LCAP_DLL_ACTIVE_REPROT            0x00100000  /* Data Link Layer Active Reporting Capable */
++#define PCIE_LCAP_PORT_NUM                     0xFF0000000  /* Port number */
++#define PCIE_LCAP_PORT_NUM_S                   24
++
++/* Maximum Length width definition */
++#define PCIE_MAX_LENGTH_WIDTH_RES  0x00
++#define PCIE_MAX_LENGTH_WIDTH_X1   0x01  /* Default */
++#define PCIE_MAX_LENGTH_WIDTH_X2   0x02
++#define PCIE_MAX_LENGTH_WIDTH_X4   0x04
++#define PCIE_MAX_LENGTH_WIDTH_X8   0x08
++#define PCIE_MAX_LENGTH_WIDTH_X12  0x0C
++#define PCIE_MAX_LENGTH_WIDTH_X16  0x10
++#define PCIE_MAX_LENGTH_WIDTH_X32  0x20
++
++/* Active State Link PM definition */
++enum {
++    PCIE_ASPM_RES0                = 0,
++    PCIE_ASPM_L0S_ENTRY_SUPPORT,        /* L0s */
++    PCIE_ASPM_RES1,
++    PCIE_ASPM_L0S_L1_ENTRY_SUPPORT,     /* L0s and L1, default */
++};
++
++/* L0s Exit Latency definition */
++enum {
++    PCIE_L0S_EIXT_LATENCY_L64NS    = 0, /* < 64 ns */
++    PCIE_L0S_EIXT_LATENCY_B64A128,      /* > 64 ns < 128 ns */
++    PCIE_L0S_EIXT_LATENCY_B128A256,     /* > 128 ns < 256 ns */
++    PCIE_L0S_EIXT_LATENCY_B256A512,     /* > 256 ns < 512 ns */
++    PCIE_L0S_EIXT_LATENCY_B512TO1U,     /* > 512 ns < 1 us */
++    PCIE_L0S_EIXT_LATENCY_B1A2U,        /* > 1 us < 2 us */
++    PCIE_L0S_EIXT_LATENCY_B2A4U,        /* > 2 us < 4 us */
++    PCIE_L0S_EIXT_LATENCY_M4US,         /* > 4 us  */
++};
++
++/* L1 Exit Latency definition */
++enum {
++    PCIE_L1_EXIT_LATENCY_L1US  = 0,  /* < 1 us */
++    PCIE_L1_EXIT_LATENCY_B1A2,       /* > 1 us < 2 us */
++    PCIE_L1_EXIT_LATENCY_B2A4,       /* > 2 us < 4 us */
++    PCIE_L1_EXIT_LATENCY_B4A8,       /* > 4 us < 8 us */
++    PCIE_L1_EXIT_LATENCY_B8A16,      /* > 8 us < 16 us */
++    PCIE_L1_EXIT_LATENCY_B16A32,     /* > 16 us < 32 us */
++    PCIE_L1_EXIT_LATENCY_B32A64,     /* > 32 us < 64 us */
++    PCIE_L1_EXIT_LATENCY_M64US,      /* > 64 us */
++};
++
++/* Link Control and Status Register */
++#define PCIE_LCTLSTS(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
++#define PCIE_LCTLSTS_ASPM_ENABLE            0x00000003  /* Active State Link PM Control */
++#define PCIE_LCTLSTS_ASPM_ENABLE_S          0
++#define PCIE_LCTLSTS_RCB128                 0x00000008  /* Read Completion Boundary 128*/
++#define PCIE_LCTLSTS_LINK_DISABLE           0x00000010  /* Link Disable */
++#define PCIE_LCTLSTS_RETRIAN_LINK           0x00000020  /* Retrain Link */
++#define PCIE_LCTLSTS_COM_CLK_CFG            0x00000040  /* Common Clock Configuration */
++#define PCIE_LCTLSTS_EXT_SYNC               0x00000080  /* Extended Synch */
++#define PCIE_LCTLSTS_CLK_PM_EN              0x00000100  /* Enable Clock Powerm Management */
++#define PCIE_LCTLSTS_LINK_SPEED             0x000F0000  /* Link Speed */
++#define PCIE_LCTLSTS_LINK_SPEED_S           16
++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH  0x03F00000  /* Negotiated Link Width */
++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
++#define PCIE_LCTLSTS_RETRAIN_PENDING        0x08000000  /* Link training is ongoing */
++#define PCIE_LCTLSTS_SLOT_CLK_CFG           0x10000000  /* Slot Clock Configuration */
++#define PCIE_LCTLSTS_DLL_ACTIVE             0x20000000  /* Data Link Layer Active */
++
++/* Slot Capabilities Register */
++#define PCIE_SLCAP(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
++
++/* Slot Capabilities */
++#define PCIE_SLCTLSTS(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
++
++/* Root Control and Capability Register */
++#define PCIE_RCTLCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
++#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR  0x00000001   /* #SERR on COR-ERR */
++#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR     0x00000002   /* #SERR on Non-Fatal ERR */
++#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR        0x00000004   /* #SERR on Fatal ERR */
++#define PCIE_RCTLCAP_PME_INT_EN               0x00000008   /* PME Interrupt Enable */
++#define PCIE_RCTLCAP_SERR_ENABLE    (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
++                                     PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
++/* Root Status Register */
++#define PCIE_RSTS(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
++#define PCIE_RSTS_PME_REQ_ID                   0x0000FFFF   /* PME Request ID */
++#define PCIE_RSTS_PME_REQ_ID_S                 0
++#define PCIE_RSTS_PME_STATUS                   0x00010000   /* PME Status */
++#define PCIE_RSTS_PME_PENDING                  0x00020000   /* PME Pending */
++
++/* PCI Express Enhanced Capability Header */
++#define PCIE_ENHANCED_CAP(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
++#define PCIE_ENHANCED_CAP_ID                 0x0000FFFF  /* PCI Express Extended Capability ID */
++#define PCIE_ENHANCED_CAP_ID_S               0
++#define PCIE_ENHANCED_CAP_VER                0x000F0000  /* Capability Version */
++#define PCIE_ENHANCED_CAP_VER_S              16
++#define PCIE_ENHANCED_CAP_NEXT_OFFSET        0xFFF00000  /* Next Capability Offset */
++#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S      20
++
++/* Uncorrectable Error Status Register */
++#define PCIE_UES_R(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
++#define PCIE_DATA_LINK_PROTOCOL_ERR          0x00000010  /* Data Link Protocol Error Status */
++#define PCIE_SURPRISE_DOWN_ERROR             0x00000020  /* Surprise Down Error Status */
++#define PCIE_POISONED_TLP                    0x00001000  /* Poisoned TLP Status */
++#define PCIE_FC_PROTOCOL_ERR                 0x00002000  /* Flow Control Protocol Error Status */
++#define PCIE_COMPLETION_TIMEOUT              0x00004000  /* Completion Timeout Status */
++#define PCIE_COMPLETOR_ABORT                 0x00008000  /* Completer Abort Error */
++#define PCIE_UNEXPECTED_COMPLETION           0x00010000  /* Unexpected Completion Status */
++#define PCIE_RECEIVER_OVERFLOW               0x00020000  /* Receive Overflow Status */
++#define PCIE_MALFORNED_TLP                   0x00040000  /* Malformed TLP Stauts */
++#define PCIE_ECRC_ERR                        0x00080000  /* ECRC Error Stauts */
++#define PCIE_UR_REQ                          0x00100000  /* Unsupported Request Error Status */
++#define PCIE_ALL_UNCORRECTABLE_ERR    (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
++                         PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT |   \
++                         PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
++                         PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
++
++/* Uncorrectable Error Mask Register, Mask means no report */
++#define PCIE_UEMR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
++
++/* Uncorrectable Error Severity Register */
++#define PCIE_UESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
++
++/* Correctable Error Status Register */
++#define PCIE_CESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
++#define PCIE_RX_ERR                          0x00000001  /* Receive Error Status */
++#define PCIE_BAD_TLP                         0x00000040  /* Bad TLP Status */
++#define PCIE_BAD_DLLP                        0x00000080  /* Bad DLLP Status */
++#define PCIE_REPLAY_NUM_ROLLOVER             0x00000100  /* Replay Number Rollover Status */
++#define PCIE_REPLAY_TIMER_TIMEOUT_ERR        0x00001000  /* Reply Timer Timeout Status */
++#define PCIE_ADVISORY_NONFTAL_ERR            0x00002000  /* Advisory Non-Fatal Error Status */
++#define PCIE_CORRECTABLE_ERR        (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
++                                     PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
++
++/* Correctable Error Mask Register */
++#define PCIE_CEMR(X)                        (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
++
++/* Advanced Error Capabilities and Control Register */
++#define PCIE_AECCR(X)                       (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
++#define PCIE_AECCR_FIRST_ERR_PTR            0x0000001F  /* First Error Pointer */
++#define PCIE_AECCR_FIRST_ERR_PTR_S          0
++#define PCIE_AECCR_ECRC_GEN_CAP             0x00000020  /* ECRC Generation Capable */
++#define PCIE_AECCR_ECRC_GEN_EN              0x00000040  /* ECRC Generation Enable */
++#define PCIE_AECCR_ECRC_CHECK_CAP           0x00000080  /* ECRC Check Capable */
++#define PCIE_AECCR_ECRC_CHECK_EN            0x00000100  /* ECRC Check Enable */
++
++/* Header Log Register 1 */
++#define PCIE_HLR1(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
++
++/* Header Log Register 2 */
++#define PCIE_HLR2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
++
++/* Header Log Register 3 */
++#define PCIE_HLR3(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
++
++/* Header Log Register 4 */
++#define PCIE_HLR4(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
++
++/* Root Error Command Register */
++#define PCIE_RECR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
++#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN  0x00000001 /* COR-ERR */
++#define PCIE_RECR_NONFATAL_ERR_REPORT_EN     0x00000002 /* Non-Fatal ERR */
++#define PCIE_RECR_FATAL_ERR_REPORT_EN        0x00000004 /* Fatal ERR */
++#define PCIE_RECR_ERR_REPORT_EN  (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
++                PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
++
++/* Root Error Status Register */
++#define PCIE_RESR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
++#define PCIE_RESR_CORRECTABLE_ERR                0x00000001   /* COR-ERR Receveid */
++#define PCIE_RESR_MULTI_CORRECTABLE_ERR          0x00000002   /* Multiple COR-ERR Received */
++#define PCIE_RESR_FATAL_NOFATAL_ERR              0x00000004   /* ERR Fatal/Non-Fatal Received */
++#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR        0x00000008   /* Multiple ERR Fatal/Non-Fatal Received */
++#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR  0x00000010   /* First UN-COR Fatal */
++#define PCIR_RESR_NON_FATAL_ERR                  0x00000020   /* Non-Fatal Error Message Received */
++#define PCIE_RESR_FATAL_ERR                      0x00000040   /* Fatal Message Received */
++#define PCIE_RESR_AER_INT_MSG_NUM                0xF8000000   /* Advanced Error Interrupt Message Number */
++#define PCIE_RESR_AER_INT_MSG_NUM_S              27
++
++/* Error Source Indentification Register */
++#define PCIE_ESIR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID         0x0000FFFF
++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S       0
++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID         0xFFFF0000
++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S       16
++
++/* VC Enhanced Capability Header */
++#define PCIE_VC_ECH(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
++
++/* Port VC Capability Register */
++#define PCIE_PVC1(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
++#define PCIE_PVC1_EXT_VC_CNT                    0x00000007  /* Extended VC Count */
++#define PCIE_PVC1_EXT_VC_CNT_S                  0
++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT            0x00000070  /* Low Priority Extended VC Count */
++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S          4
++#define PCIE_PVC1_REF_CLK                       0x00000300  /* Reference Clock */
++#define PCIE_PVC1_REF_CLK_S                     8
++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE       0x00000C00  /* Port Arbitration Table Entry Size */
++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S     10
++
++/* Extended Virtual Channel Count Defintion */
++#define PCIE_EXT_VC_CNT_MIN   0
++#define PCIE_EXT_VC_CNT_MAX   7
++
++/* Port Arbitration Table Entry Size Definition */
++enum {
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
++};
++
++/* Port VC Capability Register 2 */
++#define PCIE_PVC2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
++#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR      0x00000001  /* HW Fixed arbitration, 16 phase WRR */
++#define PCIE_PVC2_VC_ARB_32P_WRR            0x00000002  /* 32 phase WRR */
++#define PCIE_PVC2_VC_ARB_64P_WRR            0x00000004  /* 64 phase WRR */
++#define PCIE_PVC2_VC_ARB_128P_WRR           0x00000008  /* 128 phase WRR */
++#define PCIE_PVC2_VC_ARB_WRR                0x0000000F
++#define PCIE_PVC2_VC_ARB_TAB_OFFSET         0xFF000000  /* VC arbitration table offset, not support */
++#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S       24
++
++/* Port VC Control and Status Register */     
++#define PCIE_PVCCRSR(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
++#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB         0x00000001  /* Load VC Arbitration Table */
++#define PCIE_PVCCRSR_VC_ARB_SEL              0x0000000E  /* VC Arbitration Select */
++#define PCIE_PVCCRSR_VC_ARB_SEL_S            1
++#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS       0x00010000  /* Arbitration Status */
++
++/* VC0 Resource Capability Register */
++#define PCIE_VC0_RC(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
++#define PCIE_VC0_RC_PORT_ARB_HW_FIXED        0x00000001  /* HW Fixed arbitration */
++#define PCIE_VC0_RC_PORT_ARB_32P_WRR         0x00000002  /* 32 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_64P_WRR         0x00000004  /* 64 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_128P_WRR        0x00000008  /* 128 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR     0x00000010  /* Time-based 128 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR     0x00000020  /* Time-based 256 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB          (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
++                        PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
++                        PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
++
++#define PCIE_VC0_RC_REJECT_SNOOP             0x00008000  /* Reject Snoop Transactioin */
++#define PCIE_VC0_RC_MAX_TIMESLOTS            0x007F0000  /* Maximum time Slots */
++#define PCIE_VC0_RC_MAX_TIMESLOTS_S          16
++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET      0xFF000000  /* Port Arbitration Table Offset */
++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S    24
++
++/* VC0 Resource Control Register */
++#define PCIE_VC0_RC0(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
++#define PCIE_VC0_RC0_TVM0                    0x00000001  /* TC0 and VC0 */
++#define PCIE_VC0_RC0_TVM1                    0x00000002  /* TC1 and VC1 */
++#define PCIE_VC0_RC0_TVM2                    0x00000004  /* TC2 and VC2 */
++#define PCIE_VC0_RC0_TVM3                    0x00000008  /* TC3 and VC3 */
++#define PCIE_VC0_RC0_TVM4                    0x00000010  /* TC4 and VC4 */
++#define PCIE_VC0_RC0_TVM5                    0x00000020  /* TC5 and VC5 */
++#define PCIE_VC0_RC0_TVM6                    0x00000040  /* TC6 and VC6 */
++#define PCIE_VC0_RC0_TVM7                    0x00000080  /* TC7 and VC7 */
++#define PCIE_VC0_RC0_TC_VC                   0x000000FF  /* TC/VC mask */
++
++#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB       0x00010000  /* Load Port Arbitration Table */
++#define PCIE_VC0_RC0_PORT_ARB_SEL            0x000E0000  /* Port Arbitration Select */
++#define PCIE_VC0_RC0_PORT_ARB_SEL_S          17
++#define PCIE_VC0_RC0_VC_ID                   0x07000000  /* VC ID */
++#define PCIE_VC0_RC0_VC_ID_S                 24
++#define PCIE_VC0_RC0_VC_EN                   0x80000000  /* VC Enable */
++
++/* VC0 Resource Status Register */
++#define PCIE_VC0_RSR0(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
++#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS    0x00010000  /* Port Arbitration Table Status,not used */
++#define PCIE_VC0_RSR0_VC_NEG_PENDING         0x00020000  /* VC Negotiation Pending */
++
++/* Ack Latency Timer and Replay Timer Register */
++#define PCIE_ALTRT(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT   0x0000FFFF  /* Round Trip Latency Time Limit */
++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
++#define PCIE_ALTRT_REPLAY_TIME_LIMIT          0xFFFF0000  /* Replay Time Limit */
++#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S        16
++
++/* Other Message Register */
++#define PCIE_OMR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
++
++/* Port Force Link Register */
++#define PCIE_PFLR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
++#define PCIE_PFLR_LINK_NUM                   0x000000FF  /* Link Number */
++#define PCIE_PFLR_LINK_NUM_S                 0
++#define PCIE_PFLR_FORCE_LINK                 0x00008000  /* Force link */
++#define PCIE_PFLR_LINK_STATE                 0x003F0000  /* Link State */
++#define PCIE_PFLR_LINK_STATE_S               16
++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT        0xFF000000  /* Low Power Entrance Count, only for EP */
++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S      24
++
++/* Ack Frequency Register */
++#define PCIE_AFR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
++#define PCIE_AFR_AF                          0x000000FF  /* Ack Frequency */
++#define PCIE_AFR_AF_S                        0
++#define PCIE_AFR_FTS_NUM                     0x0000FF00  /* The number of Fast Training Sequence from L0S to L0 */
++#define PCIE_AFR_FTS_NUM_S                   8
++#define PCIE_AFR_COM_FTS_NUM                 0x00FF0000  /* N_FTS; when common clock is used*/
++#define PCIE_AFR_COM_FTS_NUM_S               16
++#define PCIE_AFR_L0S_ENTRY_LATENCY           0x07000000  /* L0s Entrance Latency */
++#define PCIE_AFR_L0S_ENTRY_LATENCY_S         24
++#define PCIE_AFR_L1_ENTRY_LATENCY            0x38000000  /* L1 Entrance Latency */
++#define PCIE_AFR_L1_ENTRY_LATENCY_S          27
++#define PCIE_AFR_FTS_NUM_DEFAULT             32
++#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT   7
++#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT    5
++
++/* Port Link Control Register */
++#define PCIE_PLCR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
++#define PCIE_PLCR_OTHER_MSG_REQ              0x00000001  /* Other Message Request */
++#define PCIE_PLCR_SCRAMBLE_DISABLE           0x00000002  /* Scramble Disable */  
++#define PCIE_PLCR_LOOPBACK_EN                0x00000004  /* Loopback Enable */
++#define PCIE_PLCR_LTSSM_HOT_RST              0x00000008  /* Force LTSSM to the hot reset */
++#define PCIE_PLCR_DLL_LINK_EN                0x00000020  /* Enable Link initialization */
++#define PCIE_PLCR_FAST_LINK_SIM_EN           0x00000080  /* Sets all internal timers to fast mode for simulation purposes */
++#define PCIE_PLCR_LINK_MODE                  0x003F0000  /* Link Mode Enable Mask */
++#define PCIE_PLCR_LINK_MODE_S                16
++#define PCIE_PLCR_CORRUPTED_CRC_EN           0x02000000  /* Enabled Corrupt CRC */
++
++/* Lane Skew Register */
++#define PCIE_LSR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
++#define PCIE_LSR_LANE_SKEW_NUM               0x00FFFFFF  /* Insert Lane Skew for Transmit, not applicable */
++#define PCIE_LSR_LANE_SKEW_NUM_S             0
++#define PCIE_LSR_FC_DISABLE                  0x01000000  /* Disable of Flow Control */
++#define PCIE_LSR_ACKNAK_DISABLE              0x02000000  /* Disable of Ack/Nak */
++#define PCIE_LSR_LANE_DESKEW_DISABLE         0x80000000  /* Disable of Lane-to-Lane Skew */
++
++/* Symbol Number Register */
++#define PCIE_SNR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
++#define PCIE_SNR_TS                          0x0000000F  /* Number of TS Symbol */
++#define PCIE_SNR_TS_S                        0
++#define PCIE_SNR_SKP                         0x00000700  /* Number of SKP Symbol */
++#define PCIE_SNR_SKP_S                       8
++#define PCIE_SNR_REPLAY_TIMER                0x0007C000  /* Timer Modifier for Replay Timer */
++#define PCIE_SNR_REPLAY_TIMER_S              14
++#define PCIE_SNR_ACKNAK_LATENCY_TIMER        0x00F80000  /* Timer Modifier for Ack/Nak Latency Timer */
++#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S      19
++#define PCIE_SNR_FC_TIMER                    0x1F000000  /* Timer Modifier for Flow Control Watchdog Timer */
++#define PCIE_SNR_FC_TIMER_S                  28
++
++/* Symbol Timer Register and Filter Mask Register 1 */
++#define PCIE_STRFMR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
++#define PCIE_STRFMR_SKP_INTERVAL            0x000007FF  /* SKP lnterval Value */
++#define PCIE_STRFMR_SKP_INTERVAL_S          0
++#define PCIE_STRFMR_FC_WDT_DISABLE          0x00008000  /* Disable of FC Watchdog Timer */
++#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK    0x00010000  /* Mask Function Mismatch Filtering for Incoming Requests */
++#define PCIE_STRFMR_POISONED_TLP_OK         0x00020000  /* Mask Poisoned TLP Filtering */
++#define PCIE_STRFMR_BAR_MATCH_OK            0x00040000  /* Mask BAR Match Filtering */
++#define PCIE_STRFMR_TYPE1_CFG_REQ_OK        0x00080000  /* Mask Type 1 Configuration Request Filtering */
++#define PCIE_STRFMR_LOCKED_REQ_OK           0x00100000  /* Mask Locked Request Filtering */
++#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK    0x00200000  /* Mask Tag Error Rules for Received Completions */
++#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000  /* Mask Requester ID Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK         0x00800000  /* Mask Function Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_TC_MISMATCH_OK           0x01000000  /* Mask Traffic Class Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK         0x02000000  /* Mask Attribute Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK       0x04000000  /* Mask Length Mismatch Error for Received Completions */
++#define PCIE_STRFMR_TLP_ECRC_ERR_OK              0x08000000  /* Mask ECRC Error Filtering */
++#define PCIE_STRFMR_CPL_TLP_ECRC_OK              0x10000000  /* Mask ECRC Error Filtering for Completions */
++#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP           0x20000000  /* Send Message TLPs */
++#define PCIE_STRFMR_RX_IO_TRANS_ENABLE           0x40000000  /* Mask Filtering of received I/O Requests */
++#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE          0x80000000  /* Mask Filtering of Received Configuration Requests */
++
++#define PCIE_DEF_SKP_INTERVAL    700             /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
++
++/* Filter Masker Register 2 */
++#define PCIE_FMR2(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
++#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1    0x00000001  /* Mask RADM Filtering and Error Handling Rules */
++#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1    0x00000002  /* Mask RADM Filtering and Error Handling Rules */
++
++/* Debug Register 0 */
++#define PCIE_DBR0(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
++
++/* Debug Register 1 */
++#define PCIE_DBR1(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
++
++/* Transmit Posted FC Credit Status Register */
++#define PCIE_TPFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS           0x00000FFF /* Transmit Posted Data FC Credits */
++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S         0
++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS            0x000FF000 /* Transmit Posted Header FC Credits */
++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S          12
++
++/* Transmit Non-Posted FC Credit Status */
++#define PCIE_TNPFCS(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS         0x00000FFF /* Transmit Non-Posted Data FC Credits */
++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S       0
++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS          0x000FF000 /* Transmit Non-Posted Header FC Credits */
++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S        12
++
++/* Transmit Complete FC Credit Status Register */
++#define PCIE_TCFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS         0x00000FFF /* Transmit Completion Data FC Credits */
++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S       0
++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS          0x000FF000 /* Transmit Completion Header FC Credits */
++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S        12
++
++/* Queue Status Register */
++#define PCIE_QSR(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
++#define PCIE_QSR_WAIT_UPDATE_FC_DLL               0x00000001 /* Received TLP FC Credits Not Returned */
++#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY           0x00000002 /* Transmit Retry Buffer Not Empty */
++#define PCIE_QSR_RX_QUEUE_NOT_EMPTY               0x00000004 /* Received Queue Not Empty */
++
++/* VC Transmit Arbitration Register 1 */
++#define PCIE_VCTAR1(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
++#define PCIE_VCTAR1_WRR_WEIGHT_VC0               0x000000FF /* WRR Weight for VC0 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC1               0x0000FF00 /* WRR Weight for VC1 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC2               0x00FF0000 /* WRR Weight for VC2 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC3               0xFF000000 /* WRR Weight for VC3 */
++
++/* VC Transmit Arbitration Register 2 */
++#define PCIE_VCTAR2(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
++#define PCIE_VCTAR2_WRR_WEIGHT_VC4               0x000000FF /* WRR Weight for VC4 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC5               0x0000FF00 /* WRR Weight for VC5 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC6               0x00FF0000 /* WRR Weight for VC6 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC7               0xFF000000 /* WRR Weight for VC7 */
++
++/* VC0 Posted Receive Queue Control Register */
++#define PCIE_VC0_PRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
++#define PCIE_VC0_PRQCR_P_DATA_CREDITS            0x00000FFF /* VC0 Posted Data Credits */
++#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S          0
++#define PCIE_VC0_PRQCR_P_HDR_CREDITS             0x000FF000 /* VC0 Posted Header Credits */
++#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S           12
++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE          0x00E00000 /* VC0 Posted TLP Queue Mode */
++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S        20
++#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER           0x40000000 /* TLP Type Ordering for VC0 */    
++#define PCIE_VC0_PRQCR_VC_STRICT_ORDER           0x80000000 /* VC0 Ordering for Receive Queues */
++
++/* VC0 Non-Posted Receive Queue Control */
++#define PCIE_VC0_NPRQCR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS          0x00000FFF /* VC0 Non-Posted Data Credits */
++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S        0
++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS           0x000FF000 /* VC0 Non-Posted Header Credits */
++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S         12
++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE        0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S      20
++
++/* VC0 Completion Receive Queue Control */
++#define PCIE_VC0_CRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS          0x00000FFF /* VC0 Completion TLP Queue Mode */
++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S        0
++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS           0x000FF000 /* VC0 Completion Header Credits */
++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S         12
++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE        0x00E00000 /* VC0 Completion Data Credits */
++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S      21
++
++/* Applicable to the above three registers */
++enum {
++    PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
++    PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH   = 2,
++    PCIE_VC0_TLP_QUEUE_MODE_BYPASS        = 4,
++};
++
++/* VC0 Posted Buffer Depth Register */
++#define PCIE_VC0_PBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES       0x00003FFF /* VC0 Posted Data Queue Depth */
++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S     0
++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES        0x03FF0000 /* VC0 Posted Header Queue Depth */
++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S      16
++
++/* VC0 Non-Posted Buffer Depth Register */
++#define PCIE_VC0_NPBD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES     0x00003FFF /* VC0 Non-Posted Data Queue Depth */
++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S   0
++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S    16
++
++/* VC0 Completion Buffer Depth Register */
++#define PCIE_VC0_CBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES     0x00003FFF /* C0 Completion Data Queue Depth */
++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S   0
++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Completion Header Queue Depth */
++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S    16
++
++/* PHY Status Register, all zeros in VR9 */
++#define PCIE_PHYSR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
++
++/* PHY Control Register, all zeros in VR9 */
++#define PCIE_PHYCR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
++
++/* 
++ * PCIe PDI PHY register definition, suppose all the following 
++ * stuff is confidential. 
++ * XXX, detailed bit definition
++ */
++#define	PCIE_PHY_PLL_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
++#define	PCIE_PHY_PLL_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
++#define	PCIE_PHY_PLL_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
++#define	PCIE_PHY_PLL_CTRL4(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
++#define	PCIE_PHY_PLL_CTRL5(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
++#define	PCIE_PHY_PLL_CTRL6(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
++#define	PCIE_PHY_PLL_CTRL7(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
++#define	PCIE_PHY_PLL_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
++#define	PCIE_PHY_PLL_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
++#define	PCIE_PHY_PLL_A_CTRL3(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
++#define	PCIE_PHY_PLL_STATUS(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
++ 
++#define PCIE_PHY_TX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
++#define PCIE_PHY_TX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
++#define PCIE_PHY_TX1_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
++#define PCIE_PHY_TX1_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
++#define PCIE_PHY_TX1_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
++#define PCIE_PHY_TX1_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
++#define PCIE_PHY_TX1_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
++#define PCIE_PHY_TX1_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
++
++#define PCIE_PHY_TX2_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
++#define PCIE_PHY_TX2_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
++#define PCIE_PHY_TX2_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
++#define PCIE_PHY_TX2_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
++#define PCIE_PHY_TX2_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
++#define PCIE_PHY_TX2_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
++#define PCIE_PHY_TX2_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
++
++#define PCIE_PHY_RX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
++#define PCIE_PHY_RX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
++#define PCIE_PHY_RX1_CDR(X)         (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
++#define PCIE_PHY_RX1_EI(X)          (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
++#define PCIE_PHY_RX1_A_CTRL(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
++
++/* Interrupt related stuff */
++#define PCIE_LEGACY_DISABLE 0
++#define PCIE_LEGACY_INTA  1
++#define PCIE_LEGACY_INTB  2
++#define PCIE_LEGACY_INTC  3
++#define PCIE_LEGACY_INTD  4
++#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
++
++#endif /* IFXMIPS_PCIE_REG_H */
++
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_vr9.h
+@@ -0,0 +1,269 @@
++/****************************************************************************
++                              Copyright (c) 2010
++                            Lantiq Deutschland GmbH
++                     Am Campeon 3; 85579 Neubiberg, Germany
++
++  For licensing information, see the file 'LICENSE' in the root folder of
++  this software module.
++
++ *****************************************************************************/
++/*!
++  \file ifxmips_pcie_vr9.h
++  \ingroup IFX_PCIE
++  \brief PCIe RC driver vr9 specific file
++*/
++
++#ifndef IFXMIPS_PCIE_VR9_H
++#define IFXMIPS_PCIE_VR9_H
++
++#include <linux/types.h>
++#include <linux/delay.h>
++
++#include <linux/gpio.h>
++#include <lantiq_soc.h>
++
++#define IFX_PCIE_GPIO_RESET  494
++
++#define IFX_REG_R32    ltq_r32
++#define IFX_REG_W32    ltq_w32
++#define CONFIG_IFX_PCIE_HW_SWAP
++#define IFX_RCU_AHB_ENDIAN                      ((volatile u32*)(IFX_RCU + 0x004C))
++#define IFX_RCU_RST_REQ                         ((volatile u32*)(IFX_RCU + 0x0010))
++#define IFX_RCU_AHB_BE_PCIE_PDI                  0x00000080  /* Configure PCIE PDI module in big endian*/
++
++#define IFX_RCU                                 (KSEG1 | 0x1F203000)
++#define IFX_RCU_AHB_BE_PCIE_M                    0x00000001  /* Configure AHB master port that connects to PCIe RC in big endian */
++#define IFX_RCU_AHB_BE_PCIE_S                    0x00000010  /* Configure AHB slave port that connects to PCIe RC in little endian */
++#define IFX_RCU_AHB_BE_XBAR_M                    0x00000002  /* Configure AHB master port that connects to XBAR in big endian */
++#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++
++#define IFX_PMU1_MODULE_PCIE_PHY   (0)
++#define IFX_PMU1_MODULE_PCIE_CTRL  (1)
++#define IFX_PMU1_MODULE_PDI        (4)
++#define IFX_PMU1_MODULE_MSI        (5)
++
++#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
++
++
++#define IFX_GPIO				(KSEG1 | 0x1E100B00)
++#define ALT0			((volatile u32*)(IFX_GPIO + 0x007c))
++#define ALT1			((volatile u32*)(IFX_GPIO + 0x0080))
++#define OD			((volatile u32*)(IFX_GPIO + 0x0084))
++#define DIR			((volatile u32*)(IFX_GPIO + 0x0078))
++#define OUT			((volatile u32*)(IFX_GPIO + 0x0070))
++
++
++static inline void pcie_ep_gpio_rst_init(int pcie_port)
++{
++
++	gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset");
++	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
++	gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
++
++/*    ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++    ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++    ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++    ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++    ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/
++}
++
++static inline void pcie_ahb_pmu_setup(void) 
++{
++	/* Enable AHB bus master/slave */
++	struct clk *clk;
++	clk = clk_get_sys("1d900000.pcie", "ahb");
++	clk_enable(clk);
++
++    //AHBM_PMU_SETUP(IFX_PMU_ENABLE);
++    //AHBS_PMU_SETUP(IFX_PMU_ENABLE);
++}
++
++static inline void pcie_rcu_endian_setup(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++    reg |= IFX_RCU_AHB_BE_PCIE_M;
++    reg |= IFX_RCU_AHB_BE_PCIE_S;
++    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
++#else 
++    reg |= IFX_RCU_AHB_BE_PCIE_M;
++    reg &= ~IFX_RCU_AHB_BE_PCIE_S;
++    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
++}
++
++static inline void pcie_phy_pmu_enable(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("1d900000.pcie", "phy");
++	clk_enable(clk);
++
++	//PCIE_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++}
++
++static inline void pcie_phy_pmu_disable(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("1d900000.pcie", "phy");
++	clk_disable(clk);
++
++//    PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++}
++
++static inline void pcie_pdi_big_endian(int pcie_port)
++{
++    u32 reg;
++
++    /* SRAM2PDI endianness control. */
++    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++    /* Config AHB->PCIe and PDI endianness */
++    reg |= IFX_RCU_AHB_BE_PCIE_PDI;
++    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++}
++
++static inline void pcie_pdi_pmu_enable(int pcie_port)
++{
++    /* Enable PDI to access PCIe PHY register */
++	struct clk *clk;
++	clk = clk_get_sys("1d900000.pcie", "pdi");
++	clk_enable(clk);
++    //PDI_PMU_SETUP(IFX_PMU_ENABLE);
++}
++
++static inline void pcie_core_rst_assert(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++
++    /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly  */
++    reg |= 0x00400000;
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_core_rst_deassert(int pcie_port)
++{
++    u32 reg;
++
++    /* Make sure one micro-second delay */
++    udelay(1);
++
++    /* Reset PCIe PHY & Core, bit 22 */
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    reg &= ~0x00400000;
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_assert(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    reg |= 0x00001000; /* Bit 12 */
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_deassert(int pcie_port)
++{
++    u32 reg;
++
++    /* Make sure one micro-second delay */
++    udelay(1);
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    reg &= ~0x00001000; /* Bit 12 */
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_device_rst_assert(int pcie_port)
++{
++	gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
++//    ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++}
++
++static inline void pcie_device_rst_deassert(int pcie_port)
++{
++    mdelay(100);
++	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
++//    gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
++    //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++}
++
++static inline void pcie_core_pmu_setup(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("1d900000.pcie", "ctl");
++	clk_enable(clk);
++	clk = clk_get_sys("1d900000.pcie", "bus");
++	clk_enable(clk);
++
++    /* PCIe Core controller enabled */
++//    PCIE_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++
++    /* Enable PCIe L0 Clock */
++//  PCIE_L0_CLK_PMU_SETUP(IFX_PMU_ENABLE);
++}
++
++static inline void pcie_msi_init(int pcie_port)
++{
++	struct clk *clk;
++	pcie_msi_pic_init(pcie_port);
++	clk = clk_get_sys("ltq_pcie", "msi");
++	clk_enable(clk);
++//    MSI_PMU_SETUP(IFX_PMU_ENABLE);
++}
++
++static inline u32
++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
++{
++    u32 tbus_number = bus_number;
++
++#ifdef CONFIG_PCI_LANTIQ
++    if (pcibios_host_nr() > 1) {
++        tbus_number -= pcibios_1st_host_bus_nr();
++    }
++#endif /* CONFIG_PCI_LANTIQ */
++    return tbus_number;
++}
++
++static inline u32
++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
++{
++    struct pci_dev *pdev;
++    u32 tvalue = value;
++
++    /* Sanity check */
++    pdev = pci_get_slot(bus, devfn);
++    if (pdev == NULL) {
++        return tvalue;
++    }
++
++    /* Only care about PCI bridge */
++    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
++        return tvalue;
++    }
++
++    if (read) { /* Read hack */
++    #ifdef CONFIG_PCI_LANTIQ
++        if (pcibios_host_nr() > 1) {
++            tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
++        }
++    #endif /* CONFIG_PCI_LANTIQ */
++    }
++    else { /* Write hack */
++    #ifdef CONFIG_PCI_LANTIQ
++        if (pcibios_host_nr() > 1) {
++            tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
++        }
++    #endif
++    }
++    return tvalue;
++}
++
++#endif /* IFXMIPS_PCIE_VR9_H */
++
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -256,6 +256,31 @@ static int __init pcibios_init(void)
+ 
+ subsys_initcall(pcibios_init);
+ 
++int pcibios_host_nr(void)
++{
++    int count;
++    struct pci_controller *hose;
++    for (count = 0, hose = hose_head; hose; hose = hose->next, count++) {
++        ;
++    }
++    return count;
++}
++EXPORT_SYMBOL(pcibios_host_nr);
++
++int pcibios_1st_host_bus_nr(void)
++{
++    int bus_nr = 0;
++    struct pci_controller *hose = hose_head;
++
++    if (hose != NULL) {
++        if (hose->bus != NULL) {
++            bus_nr = hose->bus->number + 1;
++        }
++    }
++    return bus_nr;
++}
++EXPORT_SYMBOL(pcibios_1st_host_bus_nr);
++
+ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
+ {
+ 	u16 cmd, old_cmd;
+--- /dev/null
++++ b/arch/mips/pci/pcie-lantiq.h
+@@ -0,0 +1,1305 @@
++/******************************************************************************
++**
++** FILE NAME    : ifxmips_pcie_reg.h
++** PROJECT      : IFX UEIP for VRX200
++** MODULES      : PCIe module
++**
++** DATE         : 02 Mar 2009
++** AUTHOR       : Lei Chuanhua
++** DESCRIPTION  : PCIe Root Complex Driver
++** COPYRIGHT    :       Copyright (c) 2009
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++** HISTORY
++** $Version $Date        $Author         $Comment
++** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
++*******************************************************************************/
++#ifndef IFXMIPS_PCIE_REG_H
++#define IFXMIPS_PCIE_REG_H
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/interrupt.h>
++/*!
++ \file ifxmips_pcie_reg.h
++ \ingroup IFX_PCIE  
++ \brief header file for PCIe module register definition
++*/
++/* PCIe Address Mapping Base */
++#define PCIE_CFG_PHY_BASE        0x1D000000UL
++#define PCIE_CFG_BASE           (KSEG1 + PCIE_CFG_PHY_BASE)
++#define PCIE_CFG_SIZE           (8 * 1024 * 1024)
++
++#define PCIE_MEM_PHY_BASE        0x1C000000UL
++#define PCIE_MEM_BASE           (KSEG1 + PCIE_MEM_PHY_BASE)
++#define PCIE_MEM_SIZE           (16 * 1024 * 1024)
++#define PCIE_MEM_PHY_END        (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
++
++#define PCIE_IO_PHY_BASE         0x1D800000UL
++#define PCIE_IO_BASE            (KSEG1 + PCIE_IO_PHY_BASE)
++#define PCIE_IO_SIZE            (1 * 1024 * 1024)
++#define PCIE_IO_PHY_END         (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
++
++#define PCIE_RC_CFG_BASE        (KSEG1 + 0x1D900000)
++#define PCIE_APP_LOGIC_REG      (KSEG1 + 0x1E100900)
++#define PCIE_MSI_PHY_BASE        0x1F600000UL
++
++#define PCIE_PDI_PHY_BASE        0x1F106800UL
++#define PCIE_PDI_BASE           (KSEG1 + PCIE_PDI_PHY_BASE)
++#define PCIE_PDI_SIZE            0x400
++
++#define PCIE1_CFG_PHY_BASE        0x19000000UL
++#define PCIE1_CFG_BASE           (KSEG1 + PCIE1_CFG_PHY_BASE)
++#define PCIE1_CFG_SIZE           (8 * 1024 * 1024)
++
++#define PCIE1_MEM_PHY_BASE        0x18000000UL
++#define PCIE1_MEM_BASE           (KSEG1 + PCIE1_MEM_PHY_BASE)
++#define PCIE1_MEM_SIZE           (16 * 1024 * 1024)
++#define PCIE1_MEM_PHY_END        (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
++
++#define PCIE1_IO_PHY_BASE         0x19800000UL
++#define PCIE1_IO_BASE            (KSEG1 + PCIE1_IO_PHY_BASE)
++#define PCIE1_IO_SIZE            (1 * 1024 * 1024)
++#define PCIE1_IO_PHY_END         (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
++
++#define PCIE1_RC_CFG_BASE        (KSEG1 + 0x19900000)
++#define PCIE1_APP_LOGIC_REG      (KSEG1 + 0x1E100700)
++#define PCIE1_MSI_PHY_BASE        0x1F400000UL
++
++#define PCIE1_PDI_PHY_BASE        0x1F700400UL
++#define PCIE1_PDI_BASE           (KSEG1 + PCIE1_PDI_PHY_BASE)
++#define PCIE1_PDI_SIZE            0x400
++
++#define PCIE_CFG_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
++#define PCIE_MEM_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
++#define PCIE_IO_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
++#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
++#define PCIE_MEM_PHY_PORT_TO_END(X)  ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
++#define PCIE_IO_PHY_PORT_TO_BASE(X)  ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
++#define PCIE_IO_PHY_PORT_TO_END(X)   ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
++#define PCIE_APP_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
++#define PCIE_RC_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
++#define PCIE_PHY_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
++
++/* PCIe Application Logic Register */
++/* RC Core Control Register */
++#define PCIE_RC_CCR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
++/* This should be enabled after initializing configuratin registers
++ * Also should check link status retraining bit
++ */
++#define PCIE_RC_CCR_LTSSM_ENABLE             0x00000001    /* Enable LTSSM to continue link establishment */
++
++/* RC Core Debug Register */
++#define PCIE_RC_DR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
++#define PCIE_RC_DR_DLL_UP                    0x00000001  /* Data Link Layer Up */
++#define PCIE_RC_DR_CURRENT_POWER_STATE       0x0000000E  /* Current Power State */
++#define PCIE_RC_DR_CURRENT_POWER_STATE_S     1
++#define PCIE_RC_DR_CURRENT_LTSSM_STATE       0x000001F0  /* Current LTSSM State */
++#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S     4
++
++#define PCIE_RC_DR_PM_DEV_STATE              0x00000E00  /* Power Management D-State */
++#define PCIE_RC_DR_PM_DEV_STATE_S            9
++
++#define PCIE_RC_DR_PM_ENABLED                0x00001000  /* Power Management State from PMU */
++#define PCIE_RC_DR_PME_EVENT_ENABLED         0x00002000  /* Power Management Event Enable State */
++#define PCIE_RC_DR_AUX_POWER_ENABLED         0x00004000  /* Auxiliary Power Enable */
++
++/* Current Power State Definition */
++enum {
++    PCIE_RC_DR_D0 = 0,
++    PCIE_RC_DR_D1,   /* Not supported */
++    PCIE_RC_DR_D2,   /* Not supported */
++    PCIE_RC_DR_D3,
++    PCIE_RC_DR_UN,
++};
++
++/* PHY Link Status Register */
++#define PCIE_PHY_SR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
++#define PCIE_PHY_SR_PHY_LINK_UP              0x00000001   /* PHY Link Up/Down Indicator */
++
++/* Electromechanical Control Register */
++#define PCIE_EM_CR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
++#define PCIE_EM_CR_CARD_IS_PRESENT           0x00000001  /* Card Presence Detect State */
++#define PCIE_EM_CR_MRL_OPEN                  0x00000002  /* MRL Sensor State */
++#define PCIE_EM_CR_POWER_FAULT_SET           0x00000004  /* Power Fault Detected */
++#define PCIE_EM_CR_MRL_SENSOR_SET            0x00000008  /* MRL Sensor Changed */
++#define PCIE_EM_CR_PRESENT_DETECT_SET        0x00000010  /* Card Presense Detect Changed */
++#define PCIE_EM_CR_CMD_CPL_INT_SET           0x00000020  /* Command Complete Interrupt */
++#define PCIE_EM_CR_SYS_INTERLOCK_SET         0x00000040  /* System Electromechanical IterLock Engaged */
++#define PCIE_EM_CR_ATTENTION_BUTTON_SET      0x00000080  /* Attention Button Pressed */
++
++/* Interrupt Status Register */
++#define PCIE_IR_SR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
++#define PCIE_IR_SR_PME_CAUSE_MSI             0x00000002  /* MSI caused by PME */
++#define PCIE_IR_SR_HP_PME_WAKE_GEN           0x00000004  /* Hotplug PME Wake Generation */
++#define PCIE_IR_SR_HP_MSI                    0x00000008  /* Hotplug MSI */
++#define PCIE_IR_SR_AHB_LU_ERR                0x00000030  /* AHB Bridge Lookup Error Signals */
++#define PCIE_IR_SR_AHB_LU_ERR_S              4
++#define PCIE_IR_SR_INT_MSG_NUM               0x00003E00  /* Interrupt Message Number */
++#define PCIE_IR_SR_INT_MSG_NUM_S             9
++#define PCIE_IR_SR_AER_INT_MSG_NUM           0xF8000000  /* Advanced Error Interrupt Message Number */
++#define PCIE_IR_SR_AER_INT_MSG_NUM_S         27
++
++/* Message Control Register */
++#define PCIE_MSG_CR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
++#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG     0x00000001  /* Generate PME Turn Off Message */
++#define PCIE_MSG_CR_GEN_UNLOCK_MSG           0x00000002  /* Generate Unlock Message */
++
++#define PCIE_VDM_DR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
++
++/* Vendor-Defined Message Requester ID Register */
++#define PCIE_VDM_RID(X)                     (PCIE_APP_PORT_TO_BASE (X) + 0x38)
++#define PCIE_VDM_RID_VENROR_MSG_REQ_ID       0x0000FFFF
++#define PCIE_VDM_RID_VDMRID_S                0
++
++/* ASPM Control Register */
++#define PCIE_ASPM_CR(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
++#define PCIE_ASPM_CR_HOT_RST                 0x00000001  /* Hot Reset Request to the downstream device */
++#define PCIE_ASPM_CR_REQ_EXIT_L1             0x00000002  /* Request to Exit L1 */
++#define PCIE_ASPM_CR_REQ_ENTER_L1            0x00000004  /* Request to Enter L1 */
++
++/* Vendor Message DW0 Register */
++#define PCIE_VM_MSG_DW0(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
++#define PCIE_VM_MSG_DW0_TYPE                 0x0000001F  /* Message type */
++#define PCIE_VM_MSG_DW0_TYPE_S               0
++#define PCIE_VM_MSG_DW0_FORMAT               0x00000060  /* Format */
++#define PCIE_VM_MSG_DW0_FORMAT_S             5
++#define PCIE_VM_MSG_DW0_TC                   0x00007000  /* Traffic Class */
++#define PCIE_VM_MSG_DW0_TC_S                 12
++#define PCIE_VM_MSG_DW0_ATTR                 0x000C0000  /* Atrributes */
++#define PCIE_VM_MSG_DW0_ATTR_S               18
++#define PCIE_VM_MSG_DW0_EP_TLP               0x00100000  /* Poisoned TLP */
++#define PCIE_VM_MSG_DW0_TD                   0x00200000  /* TLP Digest */
++#define PCIE_VM_MSG_DW0_LEN                  0xFFC00000  /* Length */
++#define PCIE_VM_MSG_DW0_LEN_S                22
++
++/* Format Definition */
++enum {
++    PCIE_VM_MSG_FORMAT_00 = 0,  /* 3DW Hdr, no data*/
++    PCIE_VM_MSG_FORMAT_01,      /* 4DW Hdr, no data */
++    PCIE_VM_MSG_FORMAT_10,      /* 3DW Hdr, with data */
++    PCIE_VM_MSG_FORMAT_11,      /* 4DW Hdr, with data */
++};
++
++/* Traffic Class Definition */
++enum {
++    PCIE_VM_MSG_TC0 = 0,
++    PCIE_VM_MSG_TC1,
++    PCIE_VM_MSG_TC2,
++    PCIE_VM_MSG_TC3,
++    PCIE_VM_MSG_TC4,
++    PCIE_VM_MSG_TC5,
++    PCIE_VM_MSG_TC6,
++    PCIE_VM_MSG_TC7,
++};
++
++/* Attributes Definition */
++enum {
++    PCIE_VM_MSG_ATTR_00 = 0,   /* RO and No Snoop cleared */
++    PCIE_VM_MSG_ATTR_01,       /* RO cleared , No Snoop set */
++    PCIE_VM_MSG_ATTR_10,       /* RO set, No Snoop cleared*/
++    PCIE_VM_MSG_ATTR_11,       /* RO and No Snoop set */
++};
++
++/* Payload Size Definition */
++#define PCIE_VM_MSG_LEN_MIN  0
++#define PCIE_VM_MSG_LEN_MAX  1024
++
++/* Vendor Message DW1 Register */
++#define PCIE_VM_MSG_DW1(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
++#define PCIE_VM_MSG_DW1_FUNC_NUM            0x00000070  /* Function Number */
++#define PCIE_VM_MSG_DW1_FUNC_NUM_S          8
++#define PCIE_VM_MSG_DW1_CODE                0x00FF0000  /* Message Code */
++#define PCIE_VM_MSG_DW1_CODE_S              16
++#define PCIE_VM_MSG_DW1_TAG                 0xFF000000  /* Tag */
++#define PCIE_VM_MSG_DW1_TAG_S               24
++
++#define PCIE_VM_MSG_DW2(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
++#define PCIE_VM_MSG_DW3(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
++
++/* Vendor Message Request Register */
++#define PCIE_VM_MSG_REQR(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
++#define PCIE_VM_MSG_REQR_REQ                 0x00000001  /* Vendor Message Request */
++
++
++/* AHB Slave Side Band Control Register */
++#define PCIE_AHB_SSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
++#define PCIE_AHB_SSB_REQ_BCM                0x00000001 /* Slave Reques BCM filed */
++#define PCIE_AHB_SSB_REQ_EP                 0x00000002 /* Slave Reques EP filed */
++#define PCIE_AHB_SSB_REQ_TD                 0x00000004 /* Slave Reques TD filed */
++#define PCIE_AHB_SSB_REQ_ATTR               0x00000018 /* Slave Reques Attribute number */
++#define PCIE_AHB_SSB_REQ_ATTR_S             3
++#define PCIE_AHB_SSB_REQ_TC                 0x000000E0 /* Slave Request TC Field */
++#define PCIE_AHB_SSB_REQ_TC_S               5
++
++/* AHB Master SideBand Ctrl Register */
++#define PCIE_AHB_MSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
++#define PCIE_AHB_MSB_RESP_ATTR               0x00000003 /* Master Response Attribute number */
++#define PCIE_AHB_MSB_RESP_ATTR_S             0
++#define PCIE_AHB_MSB_RESP_BAD_EOT            0x00000004 /* Master Response Badeot filed */
++#define PCIE_AHB_MSB_RESP_BCM                0x00000008 /* Master Response BCM filed */
++#define PCIE_AHB_MSB_RESP_EP                 0x00000010 /* Master Response EP filed */
++#define PCIE_AHB_MSB_RESP_TD                 0x00000020 /* Master Response TD filed */
++#define PCIE_AHB_MSB_RESP_FUN_NUM            0x000003C0 /* Master Response Function number */
++#define PCIE_AHB_MSB_RESP_FUN_NUM_S          6
++
++/* AHB Control Register, fixed bus enumeration exception */
++#define PCIE_AHB_CTRL(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
++#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS     0x00000001 
++
++/* Interrupt Enalbe Register */
++#define PCIE_IRNEN(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
++#define PCIE_IRNCR(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
++#define PCIE_IRNICR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
++
++/* PCIe interrupt enable/control/capture register definition */
++#define PCIE_IRN_AER_REPORT                 0x00000001  /* AER Interrupt */
++#define PCIE_IRN_AER_MSIX                   0x00000002  /* Advanced Error MSI-X Interrupt */
++#define PCIE_IRN_PME                        0x00000004  /* PME Interrupt */
++#define PCIE_IRN_HOTPLUG                    0x00000008  /* Hotplug Interrupt */
++#define PCIE_IRN_RX_VDM_MSG                 0x00000010  /* Vendor-Defined Message Interrupt */
++#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG     0x00000020  /* Correctable Error Message Interrupt */
++#define PCIE_IRN_RX_NON_FATAL_ERR_MSG       0x00000040  /* Non-fatal Error Message */
++#define PCIE_IRN_RX_FATAL_ERR_MSG           0x00000080  /* Fatal Error Message */
++#define PCIE_IRN_RX_PME_MSG                 0x00000100  /* PME Message Interrupt */
++#define PCIE_IRN_RX_PME_TURNOFF_ACK         0x00000200  /* PME Turnoff Ack Message Interrupt */
++#define PCIE_IRN_AHB_BR_FATAL_ERR           0x00000400  /* AHB Fatal Error Interrupt */
++#define PCIE_IRN_LINK_AUTO_BW_STATUS        0x00000800  /* Link Auto Bandwidth Status Interrupt */
++#define PCIE_IRN_BW_MGT                     0x00001000  /* Bandwidth Managment Interrupt */
++#define PCIE_IRN_INTA                       0x00002000  /* INTA */
++#define PCIE_IRN_INTB                       0x00004000  /* INTB */
++#define PCIE_IRN_INTC                       0x00008000  /* INTC */
++#define PCIE_IRN_INTD                       0x00010000  /* INTD */
++#define PCIE_IRN_WAKEUP                     0x00020000  /* Wake up Interrupt */
++
++#define PCIE_RC_CORE_COMBINED_INT    (PCIE_IRN_AER_REPORT |  PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
++                                      PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
++                                      PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
++                                      PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
++                                      PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
++/* PCIe RC Configuration Register */
++#define PCIE_VDID(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
++
++/* Bit definition from pci_reg.h */
++#define PCIE_PCICMDSTS(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
++#define PCIE_CCRID(X)               (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
++#define PCIE_CLSLTHTBR(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
++/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
++#define PCIE_BAR0(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
++#define PCIE_BAR1(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
++
++#define PCIE_BNR(X)                 (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
++/* Bus Number Register bits */
++#define PCIE_BNR_PRIMARY_BUS_NUM             0x000000FF
++#define PCIE_BNR_PRIMARY_BUS_NUM_S           0
++#define PCIE_PNR_SECONDARY_BUS_NUM           0x0000FF00
++#define PCIE_PNR_SECONDARY_BUS_NUM_S         8
++#define PCIE_PNR_SUB_BUS_NUM                 0x00FF0000
++#define PCIE_PNR_SUB_BUS_NUM_S               16
++
++/* IO Base/Limit Register bits */
++#define PCIE_IOBLSECS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C)  /* RC only */
++#define PCIE_IOBLSECS_32BIT_IO_ADDR             0x00000001
++#define PCIE_IOBLSECS_IO_BASE_ADDR              0x000000F0
++#define PCIE_IOBLSECS_IO_BASE_ADDR_S            4
++#define PCIE_IOBLSECS_32BIT_IOLIMT              0x00000100
++#define PCIE_IOBLSECS_IO_LIMIT_ADDR             0x0000F000
++#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S           12
++
++/* Non-prefetchable Memory Base/Limit Register bit */
++#define PCIE_MBML(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20)  /* RC only */
++#define PCIE_MBML_MEM_BASE_ADDR                 0x0000FFF0
++#define PCIE_MBML_MEM_BASE_ADDR_S               4
++#define PCIE_MBML_MEM_LIMIT_ADDR                0xFFF00000
++#define PCIE_MBML_MEM_LIMIT_ADDR_S              20
++
++/* Prefetchable Memory Base/Limit Register bit */
++#define PCIE_PMBL(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24)  /* RC only */
++#define PCIE_PMBL_64BIT_ADDR                    0x00000001
++#define PCIE_PMBL_UPPER_12BIT                   0x0000FFF0
++#define PCIE_PMBL_UPPER_12BIT_S                 4
++#define PCIE_PMBL_E64MA                         0x00010000
++#define PCIE_PMBL_END_ADDR                      0xFFF00000
++#define PCIE_PMBL_END_ADDR_S                    20
++#define PCIE_PMBU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28)  /* RC only */
++#define PCIE_PMLU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C)  /* RC only */
++
++/* I/O Base/Limit Upper 16 bits register */
++#define PCIE_IO_BANDL(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30)  /* RC only */
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE        0x0000FFFF
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S      0
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT       0xFFFF0000
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S     16
++
++#define PCIE_CPR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
++#define PCIE_EBBAR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
++
++/* Interrupt and Secondary Bridge Control Register */
++#define PCIE_INTRBCTRL(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
++
++#define PCIE_INTRBCTRL_INT_LINE                 0x000000FF
++#define PCIE_INTRBCTRL_INT_LINE_S               0
++#define PCIE_INTRBCTRL_INT_PIN                  0x0000FF00
++#define PCIE_INTRBCTRL_INT_PIN_S                8
++#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE   0x00010000    /* #PERR */
++#define PCIE_INTRBCTRL_SERR_ENABLE              0x00020000    /* #SERR */
++#define PCIE_INTRBCTRL_ISA_ENABLE               0x00040000    /* ISA enable, IO 64KB only */
++#define PCIE_INTRBCTRL_VGA_ENABLE               0x00080000    /* VGA enable */
++#define PCIE_INTRBCTRL_VGA_16BIT_DECODE         0x00100000    /* VGA 16bit decode */
++#define PCIE_INTRBCTRL_RST_SECONDARY_BUS        0x00400000    /* Secondary bus rest, hot rest, 1ms */
++/* Others are read only */
++enum {
++    PCIE_INTRBCTRL_INT_NON = 0,
++    PCIE_INTRBCTRL_INTA,
++    PCIE_INTRBCTRL_INTB,
++    PCIE_INTRBCTRL_INTC,
++    PCIE_INTRBCTRL_INTD,
++};
++
++#define PCIE_PM_CAPR(X)                  (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
++
++/* Power Management Control and Status Register */
++#define PCIE_PM_CSR(X)                   (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
++
++#define PCIE_PM_CSR_POWER_STATE           0x00000003   /* Power State */
++#define PCIE_PM_CSR_POWER_STATE_S         0
++#define PCIE_PM_CSR_SW_RST                0x00000008   /* Soft Reset Enabled */
++#define PCIE_PM_CSR_PME_ENABLE            0x00000100   /* PME Enable */
++#define PCIE_PM_CSR_PME_STATUS            0x00008000   /* PME status */
++
++/* MSI Capability Register for EP */
++#define PCIE_MCAPR(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
++
++#define PCIE_MCAPR_MSI_CAP_ID             0x000000FF  /* MSI Capability ID */
++#define PCIE_MCAPR_MSI_CAP_ID_S           0
++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR       0x0000FF00  /* Next Capability Pointer */
++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S     8
++#define PCIE_MCAPR_MSI_ENABLE             0x00010000  /* MSI Enable */
++#define PCIE_MCAPR_MULTI_MSG_CAP          0x000E0000  /* Multiple Message Capable */
++#define PCIE_MCAPR_MULTI_MSG_CAP_S        17
++#define PCIE_MCAPR_MULTI_MSG_ENABLE       0x00700000  /* Multiple Message Enable */
++#define PCIE_MCAPR_MULTI_MSG_ENABLE_S     20
++#define PCIE_MCAPR_ADDR64_CAP             0X00800000  /* 64-bit Address Capable */
++
++/* MSI Message Address Register */
++#define PCIE_MA(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
++
++#define PCIE_MA_ADDR_MASK                 0xFFFFFFFC  /* Message Address */
++
++/* MSI Message Upper Address Register */
++#define PCIE_MUA(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
++
++/* MSI Message Data Register */
++#define PCIE_MD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
++
++#define PCIE_MD_DATA                      0x0000FFFF  /* Message Data */
++#define PCIE_MD_DATA_S                    0
++
++/* PCI Express Capability Register */
++#define PCIE_XCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
++
++#define PCIE_XCAP_ID                      0x000000FF  /* PCI Express Capability ID */
++#define PCIE_XCAP_ID_S                    0
++#define PCIE_XCAP_NEXT_CAP                0x0000FF00  /* Next Capability Pointer */
++#define PCIE_XCAP_NEXT_CAP_S              8
++#define PCIE_XCAP_VER                     0x000F0000  /* PCI Express Capability Version */
++#define PCIE_XCAP_VER_S                   16
++#define PCIE_XCAP_DEV_PORT_TYPE           0x00F00000  /* Device Port Type */
++#define PCIE_XCAP_DEV_PORT_TYPE_S         20
++#define PCIE_XCAP_SLOT_IMPLEMENTED        0x01000000  /* Slot Implemented */
++#define PCIE_XCAP_MSG_INT_NUM             0x3E000000  /* Interrupt Message Number */
++#define PCIE_XCAP_MSG_INT_NUM_S           25
++
++/* Device Capability Register */
++#define PCIE_DCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
++
++#define PCIE_DCAP_MAX_PAYLOAD_SIZE        0x00000007   /* Max Payload size */
++#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S      0
++#define PCIE_DCAP_PHANTOM_FUNC            0x00000018   /* Phanton Function, not supported */
++#define PCIE_DCAP_PHANTOM_FUNC_S          3
++#define PCIE_DCAP_EXT_TAG                 0x00000020   /* Extended Tag Field */
++#define PCIE_DCAP_EP_L0S_LATENCY          0x000001C0   /* EP L0s latency only */
++#define PCIE_DCAP_EP_L0S_LATENCY_S        6
++#define PCIE_DCAP_EP_L1_LATENCY           0x00000E00   /* EP L1 latency only */
++#define PCIE_DCAP_EP_L1_LATENCY_S         9
++#define PCIE_DCAP_ROLE_BASE_ERR_REPORT    0x00008000   /* Role Based ERR */
++
++/* Maximum payload size supported */
++enum {
++    PCIE_MAX_PAYLOAD_128 = 0,
++    PCIE_MAX_PAYLOAD_256,
++    PCIE_MAX_PAYLOAD_512,
++    PCIE_MAX_PAYLOAD_1024,
++    PCIE_MAX_PAYLOAD_2048,
++    PCIE_MAX_PAYLOAD_4096,
++};
++
++/* Device Control and Status Register */
++#define PCIE_DCTLSTS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
++
++#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN        0x00000001   /* COR-ERR */
++#define PCIE_DCTLSTS_NONFATAL_ERR_EN           0x00000002   /* Non-fatal ERR */
++#define PCIE_DCTLSTS_FATAL_ERR_EN              0x00000004   /* Fatal ERR */
++#define PCIE_DCTLSYS_UR_REQ_EN                 0x00000008   /* UR ERR */
++#define PCIE_DCTLSTS_RELAXED_ORDERING_EN       0x00000010   /* Enable relaxing ordering */
++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE          0x000000E0   /* Max payload mask */
++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S        5
++#define PCIE_DCTLSTS_EXT_TAG_EN                0x00000100   /* Extended tag field */
++#define PCIE_DCTLSTS_PHANTOM_FUNC_EN           0x00000200   /* Phantom Function Enable */
++#define PCIE_DCTLSTS_AUX_PM_EN                 0x00000400   /* AUX Power PM Enable */
++#define PCIE_DCTLSTS_NO_SNOOP_EN               0x00000800   /* Enable no snoop, except root port*/
++#define PCIE_DCTLSTS_MAX_READ_SIZE             0x00007000   /* Max Read Request size*/
++#define PCIE_DCTLSTS_MAX_READ_SIZE_S           12
++#define PCIE_DCTLSTS_CORRECTABLE_ERR           0x00010000   /* COR-ERR Detected */
++#define PCIE_DCTLSTS_NONFATAL_ERR              0x00020000   /* Non-Fatal ERR Detected */
++#define PCIE_DCTLSTS_FATAL_ER                  0x00040000   /* Fatal ERR Detected */
++#define PCIE_DCTLSTS_UNSUPPORTED_REQ           0x00080000   /* UR Detected */
++#define PCIE_DCTLSTS_AUX_POWER                 0x00100000   /* Aux Power Detected */
++#define PCIE_DCTLSTS_TRANSACT_PENDING          0x00200000   /* Transaction pending */
++
++#define PCIE_DCTLSTS_ERR_EN      (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
++                                  PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
++                                  PCIE_DCTLSYS_UR_REQ_EN)
++
++/* Link Capability Register */
++#define PCIE_LCAP(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
++#define PCIE_LCAP_MAX_LINK_SPEED               0x0000000F  /* Max link speed, 0x1 by default */
++#define PCIE_LCAP_MAX_LINK_SPEED_S             0
++#define PCIE_LCAP_MAX_LENGTH_WIDTH             0x000003F0  /* Maxium Length Width */
++#define PCIE_LCAP_MAX_LENGTH_WIDTH_S           4
++#define PCIE_LCAP_ASPM_LEVEL                   0x00000C00  /* Active State Link PM Support */
++#define PCIE_LCAP_ASPM_LEVEL_S                 10
++#define PCIE_LCAP_L0S_EIXT_LATENCY             0x00007000  /* L0s Exit Latency */
++#define PCIE_LCAP_L0S_EIXT_LATENCY_S           12
++#define PCIE_LCAP_L1_EXIT_LATENCY              0x00038000  /* L1 Exit Latency */
++#define PCIE_LCAP_L1_EXIT_LATENCY_S            15
++#define PCIE_LCAP_CLK_PM                       0x00040000  /* Clock Power Management */
++#define PCIE_LCAP_SDER                         0x00080000  /* Surprise Down Error Reporting */
++#define PCIE_LCAP_DLL_ACTIVE_REPROT            0x00100000  /* Data Link Layer Active Reporting Capable */
++#define PCIE_LCAP_PORT_NUM                     0xFF0000000  /* Port number */
++#define PCIE_LCAP_PORT_NUM_S                   24
++
++/* Maximum Length width definition */
++#define PCIE_MAX_LENGTH_WIDTH_RES  0x00
++#define PCIE_MAX_LENGTH_WIDTH_X1   0x01  /* Default */
++#define PCIE_MAX_LENGTH_WIDTH_X2   0x02
++#define PCIE_MAX_LENGTH_WIDTH_X4   0x04
++#define PCIE_MAX_LENGTH_WIDTH_X8   0x08
++#define PCIE_MAX_LENGTH_WIDTH_X12  0x0C
++#define PCIE_MAX_LENGTH_WIDTH_X16  0x10
++#define PCIE_MAX_LENGTH_WIDTH_X32  0x20
++
++/* Active State Link PM definition */
++enum {
++    PCIE_ASPM_RES0                = 0,
++    PCIE_ASPM_L0S_ENTRY_SUPPORT,        /* L0s */
++    PCIE_ASPM_RES1,
++    PCIE_ASPM_L0S_L1_ENTRY_SUPPORT,     /* L0s and L1, default */
++};
++
++/* L0s Exit Latency definition */
++enum {
++    PCIE_L0S_EIXT_LATENCY_L64NS    = 0, /* < 64 ns */
++    PCIE_L0S_EIXT_LATENCY_B64A128,      /* > 64 ns < 128 ns */
++    PCIE_L0S_EIXT_LATENCY_B128A256,     /* > 128 ns < 256 ns */
++    PCIE_L0S_EIXT_LATENCY_B256A512,     /* > 256 ns < 512 ns */
++    PCIE_L0S_EIXT_LATENCY_B512TO1U,     /* > 512 ns < 1 us */
++    PCIE_L0S_EIXT_LATENCY_B1A2U,        /* > 1 us < 2 us */
++    PCIE_L0S_EIXT_LATENCY_B2A4U,        /* > 2 us < 4 us */
++    PCIE_L0S_EIXT_LATENCY_M4US,         /* > 4 us  */
++};
++
++/* L1 Exit Latency definition */
++enum {
++    PCIE_L1_EXIT_LATENCY_L1US  = 0,  /* < 1 us */
++    PCIE_L1_EXIT_LATENCY_B1A2,       /* > 1 us < 2 us */
++    PCIE_L1_EXIT_LATENCY_B2A4,       /* > 2 us < 4 us */
++    PCIE_L1_EXIT_LATENCY_B4A8,       /* > 4 us < 8 us */
++    PCIE_L1_EXIT_LATENCY_B8A16,      /* > 8 us < 16 us */
++    PCIE_L1_EXIT_LATENCY_B16A32,     /* > 16 us < 32 us */
++    PCIE_L1_EXIT_LATENCY_B32A64,     /* > 32 us < 64 us */
++    PCIE_L1_EXIT_LATENCY_M64US,      /* > 64 us */
++};
++
++/* Link Control and Status Register */
++#define PCIE_LCTLSTS(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
++#define PCIE_LCTLSTS_ASPM_ENABLE            0x00000003  /* Active State Link PM Control */
++#define PCIE_LCTLSTS_ASPM_ENABLE_S          0
++#define PCIE_LCTLSTS_RCB128                 0x00000008  /* Read Completion Boundary 128*/
++#define PCIE_LCTLSTS_LINK_DISABLE           0x00000010  /* Link Disable */
++#define PCIE_LCTLSTS_RETRIAN_LINK           0x00000020  /* Retrain Link */
++#define PCIE_LCTLSTS_COM_CLK_CFG            0x00000040  /* Common Clock Configuration */
++#define PCIE_LCTLSTS_EXT_SYNC               0x00000080  /* Extended Synch */
++#define PCIE_LCTLSTS_CLK_PM_EN              0x00000100  /* Enable Clock Powerm Management */
++#define PCIE_LCTLSTS_LINK_SPEED             0x000F0000  /* Link Speed */
++#define PCIE_LCTLSTS_LINK_SPEED_S           16
++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH  0x03F00000  /* Negotiated Link Width */
++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
++#define PCIE_LCTLSTS_RETRAIN_PENDING        0x08000000  /* Link training is ongoing */
++#define PCIE_LCTLSTS_SLOT_CLK_CFG           0x10000000  /* Slot Clock Configuration */
++#define PCIE_LCTLSTS_DLL_ACTIVE             0x20000000  /* Data Link Layer Active */
++
++/* Slot Capabilities Register */
++#define PCIE_SLCAP(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
++
++/* Slot Capabilities */
++#define PCIE_SLCTLSTS(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
++
++/* Root Control and Capability Register */
++#define PCIE_RCTLCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
++#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR  0x00000001   /* #SERR on COR-ERR */
++#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR     0x00000002   /* #SERR on Non-Fatal ERR */
++#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR        0x00000004   /* #SERR on Fatal ERR */
++#define PCIE_RCTLCAP_PME_INT_EN               0x00000008   /* PME Interrupt Enable */
++#define PCIE_RCTLCAP_SERR_ENABLE    (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
++                                     PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
++/* Root Status Register */
++#define PCIE_RSTS(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
++#define PCIE_RSTS_PME_REQ_ID                   0x0000FFFF   /* PME Request ID */
++#define PCIE_RSTS_PME_REQ_ID_S                 0
++#define PCIE_RSTS_PME_STATUS                   0x00010000   /* PME Status */
++#define PCIE_RSTS_PME_PENDING                  0x00020000   /* PME Pending */
++
++/* PCI Express Enhanced Capability Header */
++#define PCIE_ENHANCED_CAP(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
++#define PCIE_ENHANCED_CAP_ID                 0x0000FFFF  /* PCI Express Extended Capability ID */
++#define PCIE_ENHANCED_CAP_ID_S               0
++#define PCIE_ENHANCED_CAP_VER                0x000F0000  /* Capability Version */
++#define PCIE_ENHANCED_CAP_VER_S              16
++#define PCIE_ENHANCED_CAP_NEXT_OFFSET        0xFFF00000  /* Next Capability Offset */
++#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S      20
++
++/* Uncorrectable Error Status Register */
++#define PCIE_UES_R(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
++#define PCIE_DATA_LINK_PROTOCOL_ERR          0x00000010  /* Data Link Protocol Error Status */
++#define PCIE_SURPRISE_DOWN_ERROR             0x00000020  /* Surprise Down Error Status */
++#define PCIE_POISONED_TLP                    0x00001000  /* Poisoned TLP Status */
++#define PCIE_FC_PROTOCOL_ERR                 0x00002000  /* Flow Control Protocol Error Status */
++#define PCIE_COMPLETION_TIMEOUT              0x00004000  /* Completion Timeout Status */
++#define PCIE_COMPLETOR_ABORT                 0x00008000  /* Completer Abort Error */
++#define PCIE_UNEXPECTED_COMPLETION           0x00010000  /* Unexpected Completion Status */
++#define PCIE_RECEIVER_OVERFLOW               0x00020000  /* Receive Overflow Status */
++#define PCIE_MALFORNED_TLP                   0x00040000  /* Malformed TLP Stauts */
++#define PCIE_ECRC_ERR                        0x00080000  /* ECRC Error Stauts */
++#define PCIE_UR_REQ                          0x00100000  /* Unsupported Request Error Status */
++#define PCIE_ALL_UNCORRECTABLE_ERR    (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
++                         PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT |   \
++                         PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
++                         PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
++
++/* Uncorrectable Error Mask Register, Mask means no report */
++#define PCIE_UEMR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
++
++/* Uncorrectable Error Severity Register */
++#define PCIE_UESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
++
++/* Correctable Error Status Register */
++#define PCIE_CESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
++#define PCIE_RX_ERR                          0x00000001  /* Receive Error Status */
++#define PCIE_BAD_TLP                         0x00000040  /* Bad TLP Status */
++#define PCIE_BAD_DLLP                        0x00000080  /* Bad DLLP Status */
++#define PCIE_REPLAY_NUM_ROLLOVER             0x00000100  /* Replay Number Rollover Status */
++#define PCIE_REPLAY_TIMER_TIMEOUT_ERR        0x00001000  /* Reply Timer Timeout Status */
++#define PCIE_ADVISORY_NONFTAL_ERR            0x00002000  /* Advisory Non-Fatal Error Status */
++#define PCIE_CORRECTABLE_ERR        (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
++                                     PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
++
++/* Correctable Error Mask Register */
++#define PCIE_CEMR(X)                        (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
++
++/* Advanced Error Capabilities and Control Register */
++#define PCIE_AECCR(X)                       (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
++#define PCIE_AECCR_FIRST_ERR_PTR            0x0000001F  /* First Error Pointer */
++#define PCIE_AECCR_FIRST_ERR_PTR_S          0
++#define PCIE_AECCR_ECRC_GEN_CAP             0x00000020  /* ECRC Generation Capable */
++#define PCIE_AECCR_ECRC_GEN_EN              0x00000040  /* ECRC Generation Enable */
++#define PCIE_AECCR_ECRC_CHECK_CAP           0x00000080  /* ECRC Check Capable */
++#define PCIE_AECCR_ECRC_CHECK_EN            0x00000100  /* ECRC Check Enable */
++
++/* Header Log Register 1 */
++#define PCIE_HLR1(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
++
++/* Header Log Register 2 */
++#define PCIE_HLR2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
++
++/* Header Log Register 3 */
++#define PCIE_HLR3(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
++
++/* Header Log Register 4 */
++#define PCIE_HLR4(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
++
++/* Root Error Command Register */
++#define PCIE_RECR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
++#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN  0x00000001 /* COR-ERR */
++#define PCIE_RECR_NONFATAL_ERR_REPORT_EN     0x00000002 /* Non-Fatal ERR */
++#define PCIE_RECR_FATAL_ERR_REPORT_EN        0x00000004 /* Fatal ERR */
++#define PCIE_RECR_ERR_REPORT_EN  (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
++                PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
++
++/* Root Error Status Register */
++#define PCIE_RESR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
++#define PCIE_RESR_CORRECTABLE_ERR                0x00000001   /* COR-ERR Receveid */
++#define PCIE_RESR_MULTI_CORRECTABLE_ERR          0x00000002   /* Multiple COR-ERR Received */
++#define PCIE_RESR_FATAL_NOFATAL_ERR              0x00000004   /* ERR Fatal/Non-Fatal Received */
++#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR        0x00000008   /* Multiple ERR Fatal/Non-Fatal Received */
++#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR  0x00000010   /* First UN-COR Fatal */
++#define PCIR_RESR_NON_FATAL_ERR                  0x00000020   /* Non-Fatal Error Message Received */
++#define PCIE_RESR_FATAL_ERR                      0x00000040   /* Fatal Message Received */
++#define PCIE_RESR_AER_INT_MSG_NUM                0xF8000000   /* Advanced Error Interrupt Message Number */
++#define PCIE_RESR_AER_INT_MSG_NUM_S              27
++
++/* Error Source Indentification Register */
++#define PCIE_ESIR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID         0x0000FFFF
++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S       0
++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID         0xFFFF0000
++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S       16
++
++/* VC Enhanced Capability Header */
++#define PCIE_VC_ECH(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
++
++/* Port VC Capability Register */
++#define PCIE_PVC1(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
++#define PCIE_PVC1_EXT_VC_CNT                    0x00000007  /* Extended VC Count */
++#define PCIE_PVC1_EXT_VC_CNT_S                  0
++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT            0x00000070  /* Low Priority Extended VC Count */
++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S          4
++#define PCIE_PVC1_REF_CLK                       0x00000300  /* Reference Clock */
++#define PCIE_PVC1_REF_CLK_S                     8
++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE       0x00000C00  /* Port Arbitration Table Entry Size */
++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S     10
++
++/* Extended Virtual Channel Count Defintion */
++#define PCIE_EXT_VC_CNT_MIN   0
++#define PCIE_EXT_VC_CNT_MAX   7
++
++/* Port Arbitration Table Entry Size Definition */
++enum {
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
++    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
++};
++
++/* Port VC Capability Register 2 */
++#define PCIE_PVC2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
++#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR      0x00000001  /* HW Fixed arbitration, 16 phase WRR */
++#define PCIE_PVC2_VC_ARB_32P_WRR            0x00000002  /* 32 phase WRR */
++#define PCIE_PVC2_VC_ARB_64P_WRR            0x00000004  /* 64 phase WRR */
++#define PCIE_PVC2_VC_ARB_128P_WRR           0x00000008  /* 128 phase WRR */
++#define PCIE_PVC2_VC_ARB_WRR                0x0000000F
++#define PCIE_PVC2_VC_ARB_TAB_OFFSET         0xFF000000  /* VC arbitration table offset, not support */
++#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S       24
++
++/* Port VC Control and Status Register */     
++#define PCIE_PVCCRSR(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
++#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB         0x00000001  /* Load VC Arbitration Table */
++#define PCIE_PVCCRSR_VC_ARB_SEL              0x0000000E  /* VC Arbitration Select */
++#define PCIE_PVCCRSR_VC_ARB_SEL_S            1
++#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS       0x00010000  /* Arbitration Status */
++
++/* VC0 Resource Capability Register */
++#define PCIE_VC0_RC(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
++#define PCIE_VC0_RC_PORT_ARB_HW_FIXED        0x00000001  /* HW Fixed arbitration */
++#define PCIE_VC0_RC_PORT_ARB_32P_WRR         0x00000002  /* 32 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_64P_WRR         0x00000004  /* 64 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_128P_WRR        0x00000008  /* 128 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR     0x00000010  /* Time-based 128 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR     0x00000020  /* Time-based 256 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB          (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
++                        PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
++                        PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
++
++#define PCIE_VC0_RC_REJECT_SNOOP             0x00008000  /* Reject Snoop Transactioin */
++#define PCIE_VC0_RC_MAX_TIMESLOTS            0x007F0000  /* Maximum time Slots */
++#define PCIE_VC0_RC_MAX_TIMESLOTS_S          16
++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET      0xFF000000  /* Port Arbitration Table Offset */
++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S    24
++
++/* VC0 Resource Control Register */
++#define PCIE_VC0_RC0(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
++#define PCIE_VC0_RC0_TVM0                    0x00000001  /* TC0 and VC0 */
++#define PCIE_VC0_RC0_TVM1                    0x00000002  /* TC1 and VC1 */
++#define PCIE_VC0_RC0_TVM2                    0x00000004  /* TC2 and VC2 */
++#define PCIE_VC0_RC0_TVM3                    0x00000008  /* TC3 and VC3 */
++#define PCIE_VC0_RC0_TVM4                    0x00000010  /* TC4 and VC4 */
++#define PCIE_VC0_RC0_TVM5                    0x00000020  /* TC5 and VC5 */
++#define PCIE_VC0_RC0_TVM6                    0x00000040  /* TC6 and VC6 */
++#define PCIE_VC0_RC0_TVM7                    0x00000080  /* TC7 and VC7 */
++#define PCIE_VC0_RC0_TC_VC                   0x000000FF  /* TC/VC mask */
++
++#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB       0x00010000  /* Load Port Arbitration Table */
++#define PCIE_VC0_RC0_PORT_ARB_SEL            0x000E0000  /* Port Arbitration Select */
++#define PCIE_VC0_RC0_PORT_ARB_SEL_S          17
++#define PCIE_VC0_RC0_VC_ID                   0x07000000  /* VC ID */
++#define PCIE_VC0_RC0_VC_ID_S                 24
++#define PCIE_VC0_RC0_VC_EN                   0x80000000  /* VC Enable */
++
++/* VC0 Resource Status Register */
++#define PCIE_VC0_RSR0(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
++#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS    0x00010000  /* Port Arbitration Table Status,not used */
++#define PCIE_VC0_RSR0_VC_NEG_PENDING         0x00020000  /* VC Negotiation Pending */
++
++/* Ack Latency Timer and Replay Timer Register */
++#define PCIE_ALTRT(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT   0x0000FFFF  /* Round Trip Latency Time Limit */
++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
++#define PCIE_ALTRT_REPLAY_TIME_LIMIT          0xFFFF0000  /* Replay Time Limit */
++#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S        16
++
++/* Other Message Register */
++#define PCIE_OMR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
++
++/* Port Force Link Register */
++#define PCIE_PFLR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
++#define PCIE_PFLR_LINK_NUM                   0x000000FF  /* Link Number */
++#define PCIE_PFLR_LINK_NUM_S                 0
++#define PCIE_PFLR_FORCE_LINK                 0x00008000  /* Force link */
++#define PCIE_PFLR_LINK_STATE                 0x003F0000  /* Link State */
++#define PCIE_PFLR_LINK_STATE_S               16
++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT        0xFF000000  /* Low Power Entrance Count, only for EP */
++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S      24
++
++/* Ack Frequency Register */
++#define PCIE_AFR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
++#define PCIE_AFR_AF                          0x000000FF  /* Ack Frequency */
++#define PCIE_AFR_AF_S                        0
++#define PCIE_AFR_FTS_NUM                     0x0000FF00  /* The number of Fast Training Sequence from L0S to L0 */
++#define PCIE_AFR_FTS_NUM_S                   8
++#define PCIE_AFR_COM_FTS_NUM                 0x00FF0000  /* N_FTS; when common clock is used*/
++#define PCIE_AFR_COM_FTS_NUM_S               16
++#define PCIE_AFR_L0S_ENTRY_LATENCY           0x07000000  /* L0s Entrance Latency */
++#define PCIE_AFR_L0S_ENTRY_LATENCY_S         24
++#define PCIE_AFR_L1_ENTRY_LATENCY            0x38000000  /* L1 Entrance Latency */
++#define PCIE_AFR_L1_ENTRY_LATENCY_S          27
++#define PCIE_AFR_FTS_NUM_DEFAULT             32
++#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT   7
++#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT    5
++
++/* Port Link Control Register */
++#define PCIE_PLCR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
++#define PCIE_PLCR_OTHER_MSG_REQ              0x00000001  /* Other Message Request */
++#define PCIE_PLCR_SCRAMBLE_DISABLE           0x00000002  /* Scramble Disable */  
++#define PCIE_PLCR_LOOPBACK_EN                0x00000004  /* Loopback Enable */
++#define PCIE_PLCR_LTSSM_HOT_RST              0x00000008  /* Force LTSSM to the hot reset */
++#define PCIE_PLCR_DLL_LINK_EN                0x00000020  /* Enable Link initialization */
++#define PCIE_PLCR_FAST_LINK_SIM_EN           0x00000080  /* Sets all internal timers to fast mode for simulation purposes */
++#define PCIE_PLCR_LINK_MODE                  0x003F0000  /* Link Mode Enable Mask */
++#define PCIE_PLCR_LINK_MODE_S                16
++#define PCIE_PLCR_CORRUPTED_CRC_EN           0x02000000  /* Enabled Corrupt CRC */
++
++/* Lane Skew Register */
++#define PCIE_LSR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
++#define PCIE_LSR_LANE_SKEW_NUM               0x00FFFFFF  /* Insert Lane Skew for Transmit, not applicable */
++#define PCIE_LSR_LANE_SKEW_NUM_S             0
++#define PCIE_LSR_FC_DISABLE                  0x01000000  /* Disable of Flow Control */
++#define PCIE_LSR_ACKNAK_DISABLE              0x02000000  /* Disable of Ack/Nak */
++#define PCIE_LSR_LANE_DESKEW_DISABLE         0x80000000  /* Disable of Lane-to-Lane Skew */
++
++/* Symbol Number Register */
++#define PCIE_SNR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
++#define PCIE_SNR_TS                          0x0000000F  /* Number of TS Symbol */
++#define PCIE_SNR_TS_S                        0
++#define PCIE_SNR_SKP                         0x00000700  /* Number of SKP Symbol */
++#define PCIE_SNR_SKP_S                       8
++#define PCIE_SNR_REPLAY_TIMER                0x0007C000  /* Timer Modifier for Replay Timer */
++#define PCIE_SNR_REPLAY_TIMER_S              14
++#define PCIE_SNR_ACKNAK_LATENCY_TIMER        0x00F80000  /* Timer Modifier for Ack/Nak Latency Timer */
++#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S      19
++#define PCIE_SNR_FC_TIMER                    0x1F000000  /* Timer Modifier for Flow Control Watchdog Timer */
++#define PCIE_SNR_FC_TIMER_S                  28
++
++/* Symbol Timer Register and Filter Mask Register 1 */
++#define PCIE_STRFMR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
++#define PCIE_STRFMR_SKP_INTERVAL            0x000007FF  /* SKP lnterval Value */
++#define PCIE_STRFMR_SKP_INTERVAL_S          0
++#define PCIE_STRFMR_FC_WDT_DISABLE          0x00008000  /* Disable of FC Watchdog Timer */
++#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK    0x00010000  /* Mask Function Mismatch Filtering for Incoming Requests */
++#define PCIE_STRFMR_POISONED_TLP_OK         0x00020000  /* Mask Poisoned TLP Filtering */
++#define PCIE_STRFMR_BAR_MATCH_OK            0x00040000  /* Mask BAR Match Filtering */
++#define PCIE_STRFMR_TYPE1_CFG_REQ_OK        0x00080000  /* Mask Type 1 Configuration Request Filtering */
++#define PCIE_STRFMR_LOCKED_REQ_OK           0x00100000  /* Mask Locked Request Filtering */
++#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK    0x00200000  /* Mask Tag Error Rules for Received Completions */
++#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000  /* Mask Requester ID Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK         0x00800000  /* Mask Function Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_TC_MISMATCH_OK           0x01000000  /* Mask Traffic Class Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK         0x02000000  /* Mask Attribute Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK       0x04000000  /* Mask Length Mismatch Error for Received Completions */
++#define PCIE_STRFMR_TLP_ECRC_ERR_OK              0x08000000  /* Mask ECRC Error Filtering */
++#define PCIE_STRFMR_CPL_TLP_ECRC_OK              0x10000000  /* Mask ECRC Error Filtering for Completions */
++#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP           0x20000000  /* Send Message TLPs */
++#define PCIE_STRFMR_RX_IO_TRANS_ENABLE           0x40000000  /* Mask Filtering of received I/O Requests */
++#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE          0x80000000  /* Mask Filtering of Received Configuration Requests */
++
++#define PCIE_DEF_SKP_INTERVAL    700             /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
++
++/* Filter Masker Register 2 */
++#define PCIE_FMR2(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
++#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1    0x00000001  /* Mask RADM Filtering and Error Handling Rules */
++#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1    0x00000002  /* Mask RADM Filtering and Error Handling Rules */
++
++/* Debug Register 0 */
++#define PCIE_DBR0(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
++
++/* Debug Register 1 */
++#define PCIE_DBR1(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
++
++/* Transmit Posted FC Credit Status Register */
++#define PCIE_TPFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS           0x00000FFF /* Transmit Posted Data FC Credits */
++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S         0
++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS            0x000FF000 /* Transmit Posted Header FC Credits */
++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S          12
++
++/* Transmit Non-Posted FC Credit Status */
++#define PCIE_TNPFCS(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS         0x00000FFF /* Transmit Non-Posted Data FC Credits */
++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S       0
++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS          0x000FF000 /* Transmit Non-Posted Header FC Credits */
++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S        12
++
++/* Transmit Complete FC Credit Status Register */
++#define PCIE_TCFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS         0x00000FFF /* Transmit Completion Data FC Credits */
++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S       0
++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS          0x000FF000 /* Transmit Completion Header FC Credits */
++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S        12
++
++/* Queue Status Register */
++#define PCIE_QSR(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
++#define PCIE_QSR_WAIT_UPDATE_FC_DLL               0x00000001 /* Received TLP FC Credits Not Returned */
++#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY           0x00000002 /* Transmit Retry Buffer Not Empty */
++#define PCIE_QSR_RX_QUEUE_NOT_EMPTY               0x00000004 /* Received Queue Not Empty */
++
++/* VC Transmit Arbitration Register 1 */
++#define PCIE_VCTAR1(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
++#define PCIE_VCTAR1_WRR_WEIGHT_VC0               0x000000FF /* WRR Weight for VC0 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC1               0x0000FF00 /* WRR Weight for VC1 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC2               0x00FF0000 /* WRR Weight for VC2 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC3               0xFF000000 /* WRR Weight for VC3 */
++
++/* VC Transmit Arbitration Register 2 */
++#define PCIE_VCTAR2(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
++#define PCIE_VCTAR2_WRR_WEIGHT_VC4               0x000000FF /* WRR Weight for VC4 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC5               0x0000FF00 /* WRR Weight for VC5 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC6               0x00FF0000 /* WRR Weight for VC6 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC7               0xFF000000 /* WRR Weight for VC7 */
++
++/* VC0 Posted Receive Queue Control Register */
++#define PCIE_VC0_PRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
++#define PCIE_VC0_PRQCR_P_DATA_CREDITS            0x00000FFF /* VC0 Posted Data Credits */
++#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S          0
++#define PCIE_VC0_PRQCR_P_HDR_CREDITS             0x000FF000 /* VC0 Posted Header Credits */
++#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S           12
++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE          0x00E00000 /* VC0 Posted TLP Queue Mode */
++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S        20
++#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER           0x40000000 /* TLP Type Ordering for VC0 */    
++#define PCIE_VC0_PRQCR_VC_STRICT_ORDER           0x80000000 /* VC0 Ordering for Receive Queues */
++
++/* VC0 Non-Posted Receive Queue Control */
++#define PCIE_VC0_NPRQCR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS          0x00000FFF /* VC0 Non-Posted Data Credits */
++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S        0
++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS           0x000FF000 /* VC0 Non-Posted Header Credits */
++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S         12
++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE        0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S      20
++
++/* VC0 Completion Receive Queue Control */
++#define PCIE_VC0_CRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS          0x00000FFF /* VC0 Completion TLP Queue Mode */
++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S        0
++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS           0x000FF000 /* VC0 Completion Header Credits */
++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S         12
++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE        0x00E00000 /* VC0 Completion Data Credits */
++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S      21
++
++/* Applicable to the above three registers */
++enum {
++    PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
++    PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH   = 2,
++    PCIE_VC0_TLP_QUEUE_MODE_BYPASS        = 4,
++};
++
++/* VC0 Posted Buffer Depth Register */
++#define PCIE_VC0_PBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES       0x00003FFF /* VC0 Posted Data Queue Depth */
++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S     0
++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES        0x03FF0000 /* VC0 Posted Header Queue Depth */
++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S      16
++
++/* VC0 Non-Posted Buffer Depth Register */
++#define PCIE_VC0_NPBD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES     0x00003FFF /* VC0 Non-Posted Data Queue Depth */
++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S   0
++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S    16
++
++/* VC0 Completion Buffer Depth Register */
++#define PCIE_VC0_CBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES     0x00003FFF /* C0 Completion Data Queue Depth */
++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S   0
++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Completion Header Queue Depth */
++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S    16
++
++/* PHY Status Register, all zeros in VR9 */
++#define PCIE_PHYSR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
++
++/* PHY Control Register, all zeros in VR9 */
++#define PCIE_PHYCR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
++
++/* 
++ * PCIe PDI PHY register definition, suppose all the following 
++ * stuff is confidential. 
++ * XXX, detailed bit definition
++ */
++#define	PCIE_PHY_PLL_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
++#define	PCIE_PHY_PLL_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
++#define	PCIE_PHY_PLL_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
++#define	PCIE_PHY_PLL_CTRL4(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
++#define	PCIE_PHY_PLL_CTRL5(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
++#define	PCIE_PHY_PLL_CTRL6(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
++#define	PCIE_PHY_PLL_CTRL7(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
++#define	PCIE_PHY_PLL_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
++#define	PCIE_PHY_PLL_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
++#define	PCIE_PHY_PLL_A_CTRL3(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
++#define	PCIE_PHY_PLL_STATUS(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
++ 
++#define PCIE_PHY_TX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
++#define PCIE_PHY_TX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
++#define PCIE_PHY_TX1_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
++#define PCIE_PHY_TX1_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
++#define PCIE_PHY_TX1_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
++#define PCIE_PHY_TX1_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
++#define PCIE_PHY_TX1_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
++#define PCIE_PHY_TX1_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
++
++#define PCIE_PHY_TX2_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
++#define PCIE_PHY_TX2_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
++#define PCIE_PHY_TX2_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
++#define PCIE_PHY_TX2_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
++#define PCIE_PHY_TX2_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
++#define PCIE_PHY_TX2_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
++#define PCIE_PHY_TX2_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
++
++#define PCIE_PHY_RX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
++#define PCIE_PHY_RX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
++#define PCIE_PHY_RX1_CDR(X)         (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
++#define PCIE_PHY_RX1_EI(X)          (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
++#define PCIE_PHY_RX1_A_CTRL(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
++
++/* Interrupt related stuff */
++#define PCIE_LEGACY_DISABLE 0
++#define PCIE_LEGACY_INTA  1
++#define PCIE_LEGACY_INTB  2
++#define PCIE_LEGACY_INTC  3
++#define PCIE_LEGACY_INTD  4
++#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
++
++#define PCIE_IRQ_LOCK(lock) do {             \
++    unsigned long flags;                     \
++    spin_lock_irqsave(&(lock), flags);
++#define PCIE_IRQ_UNLOCK(lock)                \
++    spin_unlock_irqrestore(&(lock), flags);  \
++} while (0)
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++#define IRQF_SHARED SA_SHIRQ
++#endif
++
++#define PCIE_MSG_MSI        0x00000001
++#define PCIE_MSG_ISR        0x00000002
++#define PCIE_MSG_FIXUP      0x00000004
++#define PCIE_MSG_READ_CFG   0x00000008
++#define PCIE_MSG_WRITE_CFG  0x00000010
++#define PCIE_MSG_CFG        (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
++#define PCIE_MSG_REG        0x00000020
++#define PCIE_MSG_INIT       0x00000040
++#define PCIE_MSG_ERR        0x00000080
++#define PCIE_MSG_PHY        0x00000100
++#define PCIE_MSG_ANY        0x000001ff
++
++#define IFX_PCIE_PORT0      0
++#define IFX_PCIE_PORT1      1
++
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++#define IFX_PCIE_CORE_NR    2
++#else
++#define IFX_PCIE_CORE_NR    1
++#endif
++
++//#define IFX_PCIE_ERROR_INT
++
++//#define IFX_PCIE_DBG
++
++#if defined(IFX_PCIE_DBG)
++#define IFX_PCIE_PRINT(_m, _fmt, args...) do {   \
++    if (g_pcie_debug_flag & (_m)) {              \
++        ifx_pcie_debug((_fmt), ##args);          \
++    }                                            \
++} while (0)
++
++#define INLINE 
++#else
++#define IFX_PCIE_PRINT(_m, _fmt, args...)   \
++    do {} while(0)
++#define INLINE inline
++#endif
++
++struct ifx_pci_controller {
++	struct pci_controller   pcic;
++    
++	/* RC specific, per host bus information */
++	u32   port;  /* Port index, 0 -- 1st core, 1 -- 2nd core */
++};
++
++typedef struct ifx_pcie_ir_irq {
++    const unsigned int irq;
++    const char name[16];
++}ifx_pcie_ir_irq_t;
++
++typedef struct ifx_pcie_legacy_irq{
++    const u32 irq_bit;
++    const int irq;
++}ifx_pcie_legacy_irq_t;
++
++typedef struct ifx_pcie_irq {
++    ifx_pcie_ir_irq_t ir_irq;
++    ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
++}ifx_pcie_irq_t;
++
++extern u32 g_pcie_debug_flag;
++extern void ifx_pcie_debug(const char *fmt, ...);
++extern void pcie_phy_clock_mode_setup(int pcie_port);
++extern void pcie_msi_pic_init(int pcie_port);
++extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
++extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
++
++
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/gpio.h>
++#include <linux/clk.h>
++
++#include <lantiq_soc.h>
++
++#define IFX_PCIE_GPIO_RESET  38
++#define IFX_REG_R32	ltq_r32
++#define IFX_REG_W32	ltq_w32
++#define CONFIG_IFX_PCIE_HW_SWAP
++#define IFX_RCU_AHB_ENDIAN                      ((volatile u32*)(IFX_RCU + 0x004C))
++#define IFX_RCU_RST_REQ                         ((volatile u32*)(IFX_RCU + 0x0010))
++#define IFX_RCU_AHB_BE_PCIE_PDI                  0x00000080  /* Configure PCIE PDI module in big endian*/
++
++#define IFX_RCU                                 (KSEG1 | 0x1F203000)
++#define IFX_RCU_AHB_BE_PCIE_M                    0x00000001  /* Configure AHB master port that connects to PCIe RC in big endian */
++#define IFX_RCU_AHB_BE_PCIE_S                    0x00000010  /* Configure AHB slave port that connects to PCIe RC in little endian */
++#define IFX_RCU_AHB_BE_XBAR_M                    0x00000002  /* Configure AHB master port that connects to XBAR in big endian */
++#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++
++#define IFX_PMU1_MODULE_PCIE_PHY   (0)
++#define IFX_PMU1_MODULE_PCIE_CTRL  (1)
++#define IFX_PMU1_MODULE_PDI        (4)
++#define IFX_PMU1_MODULE_MSI        (5)
++
++#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
++
++
++static inline void pcie_ep_gpio_rst_init(int pcie_port)
++{
++}
++
++static inline void pcie_ahb_pmu_setup(void)
++{
++	struct clk *clk;
++	clk = clk_get_sys("ltq_pcie", "ahb");
++	clk_enable(clk);
++	//ltq_pmu_enable(PMU_AHBM | PMU_AHBS);
++}
++
++static inline void pcie_rcu_endian_setup(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++    reg |= IFX_RCU_AHB_BE_PCIE_M;
++    reg |= IFX_RCU_AHB_BE_PCIE_S;
++    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
++#else 
++    reg |= IFX_RCU_AHB_BE_PCIE_M;
++    reg &= ~IFX_RCU_AHB_BE_PCIE_S;
++    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
++}
++
++static inline void pcie_phy_pmu_enable(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("ltq_pcie", "phy");
++	clk_enable(clk);
++	//ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY);
++}
++
++static inline void pcie_phy_pmu_disable(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("ltq_pcie", "phy");
++	clk_disable(clk);
++	//ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY);
++}
++
++static inline void pcie_pdi_big_endian(int pcie_port)
++{
++    u32 reg;
++
++    /* SRAM2PDI endianness control. */
++    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++    /* Config AHB->PCIe and PDI endianness */
++    reg |= IFX_RCU_AHB_BE_PCIE_PDI;
++    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++}
++
++static inline void pcie_pdi_pmu_enable(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("ltq_pcie", "pdi");
++	clk_enable(clk);
++	//ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI);
++}
++
++static inline void pcie_core_rst_assert(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++
++    /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly  */
++    reg |= 0x00400000;
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_core_rst_deassert(int pcie_port)
++{
++    u32 reg;
++
++    /* Make sure one micro-second delay */
++    udelay(1);
++
++    /* Reset PCIe PHY & Core, bit 22 */
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    reg &= ~0x00400000;
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_assert(int pcie_port)
++{
++    u32 reg;
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    reg |= 0x00001000; /* Bit 12 */
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_deassert(int pcie_port)
++{
++    u32 reg;
++
++    /* Make sure one micro-second delay */
++    udelay(1);
++
++    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++    reg &= ~0x00001000; /* Bit 12 */
++    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_device_rst_assert(int pcie_port)
++{
++	gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
++  //  ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++}
++
++static inline void pcie_device_rst_deassert(int pcie_port)
++{
++    mdelay(100);
++	gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
++//    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++}
++
++static inline void pcie_core_pmu_setup(int pcie_port)
++{
++	struct clk *clk;
++	clk = clk_get_sys("ltq_pcie", "ctl");
++	clk_enable(clk);
++	clk = clk_get_sys("ltq_pcie", "bus");
++	clk_enable(clk);
++
++	//ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL);
++	//ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK);
++}
++
++static inline void pcie_msi_init(int pcie_port)
++{
++	struct clk *clk;
++    pcie_msi_pic_init(pcie_port);
++	clk = clk_get_sys("ltq_pcie", "msi");
++	clk_enable(clk);
++	//ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI);
++}
++
++static inline u32
++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
++{
++    u32 tbus_number = bus_number;
++
++#ifdef CONFIG_PCI_LANTIQ
++    if (pcibios_host_nr() > 1) {
++        tbus_number -= pcibios_1st_host_bus_nr();
++    }
++#endif /* CONFIG_PCI_LANTIQ */
++    return tbus_number;
++}
++
++static inline u32
++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
++{
++    struct pci_dev *pdev;
++    u32 tvalue = value;
++
++    /* Sanity check */
++    pdev = pci_get_slot(bus, devfn);
++    if (pdev == NULL) {
++        return tvalue;
++    }
++
++    /* Only care about PCI bridge */
++    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
++        return tvalue;
++    }
++
++    if (read) { /* Read hack */
++    #ifdef CONFIG_PCI_LANTIQ
++        if (pcibios_host_nr() > 1) {
++            tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
++        }
++    #endif /* CONFIG_PCI_LANTIQ */
++    }
++    else { /* Write hack */
++    #ifdef CONFIG_PCI_LANTIQ
++        if (pcibios_host_nr() > 1) {
++            tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
++        }
++    #endif
++    }
++    return tvalue;
++}
++
++#endif /* IFXMIPS_PCIE_VR9_H */
++
+--- a/drivers/pci/pcie/aer/Kconfig
++++ b/drivers/pci/pcie/aer/Kconfig
+@@ -19,6 +19,7 @@ config PCIEAER
+ config PCIE_ECRC
+ 	bool "PCI Express ECRC settings control"
+ 	depends on PCIEAER
++	default n
+ 	help
+ 	  Used to override firmware/bios settings for PCI Express ECRC
+ 	  (transaction layer end-to-end CRC checking).
+--- a/include/linux/pci.h
++++ b/include/linux/pci.h
+@@ -1228,6 +1228,8 @@ void pci_walk_bus(struct pci_bus *top, i
+ 		  void *userdata);
+ int pci_cfg_space_size(struct pci_dev *dev);
+ unsigned char pci_bus_max_busnr(struct pci_bus *bus);
++int pcibios_host_nr(void);
++int pcibios_1st_host_bus_nr(void);
+ void pci_setup_bridge(struct pci_bus *bus);
+ resource_size_t pcibios_window_alignment(struct pci_bus *bus,
+ 					 unsigned long type);
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -1054,6 +1054,12 @@
+ #define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
+ #define PCI_DEVICE_ID_SGI_IOC4		0x100a
+ 
++#define PCI_VENDOR_ID_INFINEON		0x15D1
++#define PCI_DEVICE_ID_INFINEON_DANUBE	0x000F
++#define PCI_DEVICE_ID_INFINEON_PCIE	0x0011
++#define PCI_VENDOR_ID_LANTIQ		0x1BEF
++#define PCI_DEVICE_ID_LANTIQ_PCIE	0x0011
++
+ #define PCI_VENDOR_ID_WINBOND		0x10ad
+ #define PCI_DEVICE_ID_WINBOND_82C105	0x0105
+ #define PCI_DEVICE_ID_WINBOND_83C553	0x0565
diff --git a/target/linux/lantiq/patches-4.4/0002-MIPS-lantiq-dtb-image-hack.patch b/target/linux/lantiq/patches-4.4/0002-MIPS-lantiq-dtb-image-hack.patch
new file mode 100644
index 0000000..89a498d
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0002-MIPS-lantiq-dtb-image-hack.patch
@@ -0,0 +1,31 @@
+From 17348293f7f8103c97c8d2a6b0ef36eae06ec371 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Wed, 13 Mar 2013 09:36:16 +0100
+Subject: [PATCH 02/36] MIPS: lantiq: dtb image hack
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/lantiq/Makefile |    2 --
+ arch/mips/lantiq/prom.c   |    4 +++-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -63,6 +63,8 @@ static void __init prom_init_cmdline(voi
+ 	}
+ }
+ 
++extern struct boot_param_header __image_dtb;
++
+ void __init plat_mem_setup(void)
+ {
+ 	ioport_resource.start = IOPORT_RESOURCE_START;
+@@ -76,7 +78,7 @@ void __init plat_mem_setup(void)
+ 	 * Load the builtin devicetree. This causes the chosen node to be
+ 	 * parsed resulting in our memory appearing
+ 	 */
+-	__dt_setup_arch(__dtb_start);
++	__dt_setup_arch(&__image_dtb);
+ }
+ 
+ void __init device_tree_init(void)
diff --git a/target/linux/lantiq/patches-4.4/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-4.4/0004-MIPS-lantiq-add-atm-hack.patch
new file mode 100644
index 0000000..53809d0
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0004-MIPS-lantiq-add-atm-hack.patch
@@ -0,0 +1,500 @@
+From 9afadf01b1be371ee88491819aa67364684461f9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Fri, 3 Aug 2012 10:27:25 +0200
+Subject: [PATCH 04/36] MIPS: lantiq: add atm hack
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/include/asm/mach-lantiq/lantiq_atm.h |  196 +++++++++++++++++++++++
+ arch/mips/include/asm/mach-lantiq/lantiq_ptm.h |  203 ++++++++++++++++++++++++
+ arch/mips/lantiq/irq.c                         |    2 +
+ arch/mips/mm/cache.c                           |    2 +
+ include/uapi/linux/atm.h                       |    6 +
+ net/atm/common.c                               |    6 +
+ net/atm/proc.c                                 |    2 +-
+ 7 files changed, 416 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h
+ create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
+
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
+@@ -0,0 +1,196 @@
++/******************************************************************************
++**
++** FILE NAME    : ifx_atm.h
++** PROJECT      : UEIP
++** MODULES      : ATM
++**
++** DATE         : 17 Jun 2009
++** AUTHOR       : Xu Liang
++** DESCRIPTION  : Global ATM driver header file
++** COPYRIGHT    :       Copyright (c) 2006
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++**
++** HISTORY
++** $Date        $Author         $Comment
++** 07 JUL 2009  Xu Liang        Init Version
++*******************************************************************************/
++
++#ifndef IFX_ATM_H
++#define IFX_ATM_H
++
++
++
++/*!
++  \defgroup IFX_ATM UEIP Project - ATM driver module
++  \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9.
++ */
++
++/*!
++  \defgroup IFX_ATM_IOCTL IOCTL Commands
++  \ingroup IFX_ATM
++  \brief IOCTL Commands used by user application.
++ */
++
++/*!
++  \defgroup IFX_ATM_STRUCT Structures
++  \ingroup IFX_ATM
++  \brief Structures used by user application.
++ */
++
++/*!
++  \file ifx_atm.h
++  \ingroup IFX_ATM
++  \brief ATM driver header file
++ */
++
++
++
++/*
++ * ####################################
++ *              Definition
++ * ####################################
++ */
++
++/*!
++  \addtogroup IFX_ATM_STRUCT
++ */
++/*@{*/
++
++/*
++ *  ATM MIB
++ */
++
++/*!
++  \struct atm_cell_ifEntry_t
++  \brief Structure used for Cell Level MIB Counters.
++
++  User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL".
++ */
++typedef struct {
++	__u32	ifHCInOctets_h;     /*!< byte counter of ingress cells (upper 32 bits, total 64 bits)   */
++	__u32	ifHCInOctets_l;     /*!< byte counter of ingress cells (lower 32 bits, total 64 bits)   */
++	__u32	ifHCOutOctets_h;    /*!< byte counter of egress cells (upper 32 bits, total 64 bits)    */
++	__u32	ifHCOutOctets_l;    /*!< byte counter of egress cells (lower 32 bits, total 64 bits)    */
++	__u32	ifInErrors;         /*!< counter of error ingress cells     */
++	__u32	ifInUnknownProtos;  /*!< counter of unknown ingress cells   */
++	__u32	ifOutErrors;        /*!< counter of error egress cells      */
++} atm_cell_ifEntry_t;
++
++/*!
++  \struct atm_aal5_ifEntry_t
++  \brief Structure used for AAL5 Frame Level MIB Counters.
++
++  User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5".
++ */
++typedef struct {
++	__u32	ifHCInOctets_h;     /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */
++	__u32	ifHCInOctets_l;     /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */
++	__u32	ifHCOutOctets_h;    /*!< byte counter of egress packets (upper 32 bits, total 64 bits)  */
++	__u32	ifHCOutOctets_l;    /*!< byte counter of egress packets (lower 32 bits, total 64 bits)  */
++	__u32	ifInUcastPkts;      /*!< counter of ingress packets         */
++	__u32	ifOutUcastPkts;     /*!< counter of egress packets          */
++	__u32	ifInErrors;         /*!< counter of error ingress packets   */
++	__u32	ifInDiscards;       /*!< counter of dropped ingress packets */
++	__u32	ifOutErros;         /*!< counter of error egress packets    */
++	__u32	ifOutDiscards;      /*!< counter of dropped egress packets  */
++} atm_aal5_ifEntry_t;
++
++/*!
++  \struct atm_aal5_vcc_t
++  \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
++
++  This structure is a part of structure "atm_aal5_vcc_x_t".
++ */
++typedef struct {
++	__u32	aal5VccCrcErrors;       /*!< counter of ingress packets with CRC error  */
++	__u32	aal5VccSarTimeOuts;     /*!< counter of ingress packets with Re-assemble timeout    */  //no timer support yet
++	__u32	aal5VccOverSizedSDUs;   /*!< counter of oversized ingress packets       */
++} atm_aal5_vcc_t;
++
++/*!
++  \struct atm_aal5_vcc_x_t
++  \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
++
++  User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC".
++ */
++typedef struct {
++	int             vpi;        /*!< VPI of the VCC to get MIB counters */
++	int             vci;        /*!< VCI of the VCC to get MIB counters */
++	atm_aal5_vcc_t  mib_vcc;    /*!< structure to get MIB counters      */
++} atm_aal5_vcc_x_t;
++
++/*@}*/
++
++
++
++/*
++ * ####################################
++ *                IOCTL
++ * ####################################
++ */
++
++/*!
++  \addtogroup IFX_ATM_IOCTL
++ */
++/*@{*/
++
++/*
++ *  ioctl Command
++ */
++/*!
++  \brief ATM IOCTL Magic Number
++ */
++#define PPE_ATM_IOC_MAGIC       'o'
++/*!
++  \brief ATM IOCTL Command - Get Cell Level MIB Counters
++
++   This command is obsolete. User can get cell level MIB from DSL API.
++   This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters.
++ */
++#define PPE_ATM_MIB_CELL        _IOW(PPE_ATM_IOC_MAGIC,  0, atm_cell_ifEntry_t)
++/*!
++  \brief ATM IOCTL Command - Get AAL5 Level MIB Counters
++
++   Get AAL5 packet counters.
++   This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters.
++ */
++#define PPE_ATM_MIB_AAL5        _IOW(PPE_ATM_IOC_MAGIC,  1, atm_aal5_ifEntry_t)
++/*!
++  \brief ATM IOCTL Command - Get Per PVC MIB Counters
++
++   Get AAL5 packet counters for each PVC.
++   This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters.
++ */
++#define PPE_ATM_MIB_VCC         _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t)
++/*!
++  \brief Total Number of ATM IOCTL Commands
++ */
++#define PPE_ATM_IOC_MAXNR       3
++
++/*@}*/
++
++
++
++/*
++ * ####################################
++ *                 API
++ * ####################################
++ */
++
++#ifdef __KERNEL__
++struct port_cell_info {
++    unsigned int    port_num;
++    unsigned int    tx_link_rate[2];
++};
++#endif
++
++
++
++#endif  //  IFX_ATM_H
++
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
+@@ -0,0 +1,203 @@
++/******************************************************************************
++**
++** FILE NAME    : ifx_ptm.h
++** PROJECT      : UEIP
++** MODULES      : PTM
++**
++** DATE         : 17 Jun 2009
++** AUTHOR       : Xu Liang
++** DESCRIPTION  : Global PTM driver header file
++** COPYRIGHT    :       Copyright (c) 2006
++**                      Infineon Technologies AG
++**                      Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++**    This program is free software; you can redistribute it and/or modify
++**    it under the terms of the GNU General Public License as published by
++**    the Free Software Foundation; either version 2 of the License, or
++**    (at your option) any later version.
++**
++** HISTORY
++** $Date        $Author         $Comment
++** 07 JUL 2009  Xu Liang        Init Version
++*******************************************************************************/
++
++#ifndef IFX_PTM_H
++#define IFX_PTM_H
++
++
++
++/*!
++  \defgroup IFX_PTM UEIP Project - PTM driver module
++  \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9.
++ */
++
++/*!
++  \defgroup IFX_PTM_IOCTL IOCTL Commands
++  \ingroup IFX_PTM
++  \brief IOCTL Commands used by user application.
++ */
++
++/*!
++  \defgroup IFX_PTM_STRUCT Structures
++  \ingroup IFX_PTM
++  \brief Structures used by user application.
++ */
++
++/*!
++  \file ifx_ptm.h
++  \ingroup IFX_PTM
++  \brief PTM driver header file
++ */
++
++
++
++/*
++ * ####################################
++ *              Definition
++ * ####################################
++ */
++
++
++
++/*
++ * ####################################
++ *                IOCTL
++ * ####################################
++ */
++
++/*!
++  \addtogroup IFX_PTM_IOCTL
++ */
++/*@{*/
++
++/*
++ *  ioctl Command
++ */
++/*!
++  \brief PTM IOCTL Command - Get codeword MIB counters.
++
++  This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters.
++ */
++#define IFX_PTM_MIB_CW_GET              SIOCDEVPRIVATE + 1
++/*!
++  \brief PTM IOCTL Command - Get packet MIB counters.
++
++  This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters.
++ */
++#define IFX_PTM_MIB_FRAME_GET           SIOCDEVPRIVATE + 2
++/*!
++  \brief PTM IOCTL Command - Get firmware configuration (CRC).
++
++  This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC).
++ */
++#define IFX_PTM_CFG_GET                 SIOCDEVPRIVATE + 3
++/*!
++  \brief PTM IOCTL Command - Set firmware configuration (CRC).
++
++  This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC).
++ */
++#define IFX_PTM_CFG_SET                 SIOCDEVPRIVATE + 4
++/*!
++  \brief PTM IOCTL Command - Program priority value to TX queue mapping.
++
++  This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping.
++ */
++#define IFX_PTM_MAP_PKT_PRIO_TO_Q       SIOCDEVPRIVATE + 14
++
++/*@}*/
++
++
++/*!
++  \addtogroup IFX_PTM_STRUCT
++ */
++/*@{*/
++
++/*
++ *  ioctl Data Type
++ */
++
++/*!
++  \typedef PTM_CW_IF_ENTRY_T
++  \brief Wrapping of structure "ptm_cw_ifEntry_t".
++ */
++/*!
++  \struct ptm_cw_ifEntry_t
++  \brief Structure used for CodeWord level MIB counters.
++ */
++typedef struct ptm_cw_ifEntry_t {
++    uint32_t    ifRxNoIdleCodewords;    /*!< output, number of ingress user codeword */
++    uint32_t    ifRxIdleCodewords;      /*!< output, number of ingress idle codeword */
++    uint32_t    ifRxCodingViolation;    /*!< output, number of error ingress codeword */
++    uint32_t    ifTxNoIdleCodewords;    /*!< output, number of egress user codeword */
++    uint32_t    ifTxIdleCodewords;      /*!< output, number of egress idle codeword */
++} PTM_CW_IF_ENTRY_T;
++
++/*!
++  \typedef PTM_FRAME_MIB_T
++  \brief Wrapping of structure "ptm_frame_mib_t".
++ */
++/*!
++  \struct ptm_frame_mib_t
++  \brief Structure used for packet level MIB counters.
++ */
++typedef struct ptm_frame_mib_t {
++    uint32_t    RxCorrect;      /*!< output, number of ingress packet */
++    uint32_t    TC_CrcError;    /*!< output, number of egress packet with CRC error */
++    uint32_t    RxDropped;      /*!< output, number of dropped ingress packet */
++    uint32_t    TxSend;         /*!< output, number of egress packet */
++} PTM_FRAME_MIB_T;
++
++/*!
++  \typedef IFX_PTM_CFG_T
++  \brief Wrapping of structure "ptm_cfg_t".
++ */
++/*!
++  \struct ptm_cfg_t
++  \brief Structure used for ETH/TC CRC configuration.
++ */
++typedef struct ptm_cfg_t {
++    uint32_t    RxEthCrcPresent;    /*!< input/output, ingress packet has ETH CRC */
++    uint32_t    RxEthCrcCheck;      /*!< input/output, check ETH CRC of ingress packet */
++    uint32_t    RxTcCrcCheck;       /*!< input/output, check TC CRC of ingress codeword */
++    uint32_t    RxTcCrcLen;         /*!< input/output, length of TC CRC of ingress codeword */
++    uint32_t    TxEthCrcGen;        /*!< input/output, generate ETH CRC for egress packet */
++    uint32_t    TxTcCrcGen;         /*!< input/output, generate TC CRC for egress codeword */
++    uint32_t    TxTcCrcLen;         /*!< input/output, length of TC CRC of egress codeword */
++} IFX_PTM_CFG_T;
++
++/*!
++  \typedef IFX_PTM_PRIO_Q_MAP_T
++  \brief Wrapping of structure "ppe_prio_q_map".
++ */
++/*!
++  \struct ppe_prio_q_map
++  \brief Structure used for Priority Value to TX Queue mapping.
++ */
++typedef struct ppe_prio_q_map {
++    int             pkt_prio;
++    int             qid;
++    int             vpi;    //  ignored in eth interface
++    int             vci;    //  ignored in eth interface
++} IFX_PTM_PRIO_Q_MAP_T;
++
++/*@}*/
++
++
++
++/*
++ * ####################################
++ *                 API
++ * ####################################
++ */
++
++#ifdef __KERNEL__
++struct port_cell_info {
++    unsigned int    port_num;
++    unsigned int    tx_link_rate[2];
++};
++#endif
++
++
++
++#endif  //  IFX_PTM_H
++
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -14,6 +14,7 @@
+ #include <linux/of_platform.h>
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
++#include <linux/module.h>
+ 
+ #include <asm/bootinfo.h>
+ #include <asm/irq_cpu.h>
+@@ -100,6 +101,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
+ 	ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
+ 	ltq_icu_w32(im, BIT(offset), isr);
+ }
++EXPORT_SYMBOL(ltq_mask_and_ack_irq);
+ 
+ static void ltq_ack_irq(struct irq_data *d)
+ {
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -59,6 +59,8 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ 
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_wback);
++EXPORT_SYMBOL(_dma_cache_inv);
+ 
+ #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
+ 
+--- a/include/uapi/linux/atm.h
++++ b/include/uapi/linux/atm.h
+@@ -130,8 +130,14 @@
+ #define ATM_ABR		4
+ #define ATM_ANYCLASS	5		/* compatible with everything */
+ 
++#define ATM_VBR_NRT     ATM_VBR
++#define ATM_VBR_RT      6
++#define ATM_UBR_PLUS    7
++#define ATM_GFR         8
++
+ #define ATM_MAX_PCR	-1		/* maximum available PCR */
+ 
++
+ struct atm_trafprm {
+ 	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
+ 	int		max_pcr;	/* maximum PCR in cells per second */
+--- a/net/atm/common.c
++++ b/net/atm/common.c
+@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
+ 	write_unlock_irq(&vcc_sklist_lock);
+ }
+ 
++struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL;
++EXPORT_SYMBOL(ifx_atm_alloc_tx);
++
+ static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size)
+ {
+ 	struct sk_buff *skb;
+ 	struct sock *sk = sk_atm(vcc);
+ 
++	if (ifx_atm_alloc_tx != NULL)
++		return ifx_atm_alloc_tx(vcc, size);
++
+ 	if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
+ 		pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
+ 			 sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
+--- a/net/atm/proc.c
++++ b/net/atm/proc.c
+@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
+ static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
+ {
+ 	static const char *const class_name[] = {
+-		"off", "UBR", "CBR", "VBR", "ABR"};
++		"off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"};
+ 	static const char *const aal_name[] = {
+ 		"---",	"1",	"2",	"3/4",	/*  0- 3 */
+ 		"???",	"5",	"???",	"???",	/*  4- 7 */
diff --git a/target/linux/lantiq/patches-4.4/0007-MIPS-lantiq-add-basic-tffs-driver.patch b/target/linux/lantiq/patches-4.4/0007-MIPS-lantiq-add-basic-tffs-driver.patch
new file mode 100644
index 0000000..7081373
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0007-MIPS-lantiq-add-basic-tffs-driver.patch
@@ -0,0 +1,111 @@
+From d27ec8bb97db0f60d81ab255d51ac4e967362067 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 7 Aug 2014 18:34:19 +0200
+Subject: [PATCH 07/36] MIPS: lantiq: add basic tffs driver
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/lantiq/xway/Makefile |    2 +-
+ arch/mips/lantiq/xway/tffs.c   |   87 ++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 88 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/lantiq/xway/tffs.c
+
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,5 +1,5 @@
+ obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+ 
+-obj-y += vmmc.o
++obj-y += vmmc.o tffs.o
+ 
+ obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
+--- /dev/null
++++ b/arch/mips/lantiq/xway/tffs.c
+@@ -0,0 +1,87 @@
++#include <linux/module.h>
++#include <linux/mtd/mtd.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++
++struct tffs_entry {
++    uint16_t id;
++    uint16_t len;
++};
++
++static struct tffs_id {
++	uint32_t id;
++	char *name;
++	unsigned char *val;
++	uint32_t offset;
++	uint32_t len;
++} ids[] = {
++	{ 0x01A9, "annex" },
++	{ 0x0188, "maca" },
++	{ 0x0189, "macb" },
++	{ 0x018a, "macwlan" },
++	{ 0x0195, "macwlan2" },
++	{ 0x018b, "macdsl" },
++	{ 0x01C2, "webgui_pass" },
++	{ 0x01AB, "wlan_key" },
++};
++
++static struct mtd_info *tffs1, *tffs2;
++
++static struct tffs_id* tffs_find_id(int id)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(ids); i++)
++		if (id == ids[i].id)
++			return &ids[i];
++
++	return NULL;
++}
++
++static void tffs_index(void)
++{
++	struct tffs_entry *E = NULL;
++	struct tffs_entry entry;
++	int ret, retlen;
++
++	while ((unsigned int) E + sizeof(struct tffs_entry) < tffs2->size) {
++		struct tffs_id *id;
++		int len;
++
++		ret = mtd_read(tffs2, (unsigned int) E, sizeof(struct tffs_entry), &retlen, (unsigned char *)&entry);
++		if (ret)
++			return;
++
++		if (entry.id == 0xffff)
++			return;
++
++		id = tffs_find_id(entry.id);
++		if (id) {
++			id->offset = (uint32_t) E;
++			id->len = entry.len;
++			id->val = kzalloc(entry.len + 1, GFP_KERNEL);
++			mtd_read(tffs2, ((unsigned int) E) + sizeof(struct tffs_entry), entry.len, &retlen, id->val);
++
++		}
++		//printk(KERN_INFO "found entry at 0x%08X-> [<0x%x> %u bytes]\n", (uint32_t) E, entry.id, entry.len);
++		if (id && id->name)
++			printk(KERN_INFO "found entry name -> %s=%s\n", id->name, id->val);
++
++		len = (entry.len + 3) & ~0x03;
++		E = (struct tffs_entry *)(((unsigned int)E) + sizeof(struct tffs_entry) + len);
++	}
++}
++
++static int __init tffs_init(void)
++{
++	tffs1 = get_mtd_device_nm("tffs (1)");
++	tffs2 = get_mtd_device_nm("tffs (2)");
++	if (IS_ERR(tffs1) || IS_ERR(tffs2))
++		return -1;
++
++	tffs_index();
++
++	return 0;
++}
++late_initcall(tffs_init);
++
diff --git a/target/linux/lantiq/patches-4.4/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-4.4/0008-MIPS-lantiq-backport-old-timer-code.patch
new file mode 100644
index 0000000..5525503
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0008-MIPS-lantiq-backport-old-timer-code.patch
@@ -0,0 +1,1028 @@
+From 94800350cb8d2f29dda2206b5e9a3772024ee168 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 7 Aug 2014 18:30:56 +0200
+Subject: [PATCH 08/36] MIPS: lantiq: backport old timer code
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/include/asm/mach-lantiq/lantiq_timer.h |  155 ++++
+ arch/mips/lantiq/xway/Makefile                   |    2 +-
+ arch/mips/lantiq/xway/timer.c                    |  845 ++++++++++++++++++++++
+ 3 files changed, 1001 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+ create mode 100644 arch/mips/lantiq/xway/timer.c
+
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+@@ -0,0 +1,155 @@
++#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++
++
++/******************************************************************************
++       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
++
++                               No Warranty
++   Because the program is licensed free of charge, there is no warranty for
++   the program, to the extent permitted by applicable law.  Except when
++   otherwise stated in writing the copyright holders and/or other parties
++   provide the program "as is" without warranty of any kind, either
++   expressed or implied, including, but not limited to, the implied
++   warranties of merchantability and fitness for a particular purpose. The
++   entire risk as to the quality and performance of the program is with
++   you.  should the program prove defective, you assume the cost of all
++   necessary servicing, repair or correction.
++
++   In no event unless required by applicable law or agreed to in writing
++   will any copyright holder, or any other party who may modify and/or
++   redistribute the program as permitted above, be liable to you for
++   damages, including any general, special, incidental or consequential
++   damages arising out of the use or inability to use the program
++   (including but not limited to loss of data or data being rendered
++   inaccurate or losses sustained by you or third parties or a failure of
++   the program to operate with any other programs), even if such holder or
++   other party has been advised of the possibility of such damages.
++******************************************************************************/
++
++
++/*
++ * ####################################
++ *              Definition
++ * ####################################
++ */
++
++/*
++ *  Available Timer/Counter Index
++ */
++#define TIMER(n, X)                     (n * 2 + (X ? 1 : 0))
++#define TIMER_ANY                       0x00
++#define TIMER1A                         TIMER(1, 0)
++#define TIMER1B                         TIMER(1, 1)
++#define TIMER2A                         TIMER(2, 0)
++#define TIMER2B                         TIMER(2, 1)
++#define TIMER3A                         TIMER(3, 0)
++#define TIMER3B                         TIMER(3, 1)
++
++/*
++ *  Flag of Timer/Counter
++ *  These flags specify the way in which timer is configured.
++ */
++/*  Bit size of timer/counter.                      */
++#define TIMER_FLAG_16BIT                0x0000
++#define TIMER_FLAG_32BIT                0x0001
++/*  Switch between timer and counter.               */
++#define TIMER_FLAG_TIMER                0x0000
++#define TIMER_FLAG_COUNTER              0x0002
++/*  Stop or continue when overflowing/underflowing. */
++#define TIMER_FLAG_ONCE                 0x0000
++#define TIMER_FLAG_CYCLIC               0x0004
++/*  Count up or counter down.                       */
++#define TIMER_FLAG_UP                   0x0000
++#define TIMER_FLAG_DOWN                 0x0008
++/*  Count on specific level or edge.                */
++#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
++#define TIMER_FLAG_LOW_LEVEL_SENSITIVE  0x0040
++#define TIMER_FLAG_RISE_EDGE            0x0010
++#define TIMER_FLAG_FALL_EDGE            0x0020
++#define TIMER_FLAG_ANY_EDGE             0x0030
++/*  Signal is syncronous to module clock or not.    */
++#define TIMER_FLAG_UNSYNC               0x0000
++#define TIMER_FLAG_SYNC                 0x0080
++/*  Different interrupt handle type.                */
++#define TIMER_FLAG_NO_HANDLE            0x0000
++#if defined(__KERNEL__)
++    #define TIMER_FLAG_CALLBACK_IN_IRQ  0x0100
++#endif  //  defined(__KERNEL__)
++#define TIMER_FLAG_SIGNAL               0x0300
++/*  Internal clock source or external clock source  */
++#define TIMER_FLAG_INT_SRC              0x0000
++#define TIMER_FLAG_EXT_SRC              0x1000
++
++
++/*
++ *  ioctl Command
++ */
++#define GPTU_REQUEST_TIMER              0x01    /*  General method to setup timer/counter.  */
++#define GPTU_FREE_TIMER                 0x02    /*  Free timer/counter.                     */
++#define GPTU_START_TIMER                0x03    /*  Start or resume timer/counter.          */
++#define GPTU_STOP_TIMER                 0x04    /*  Suspend timer/counter.                  */
++#define GPTU_GET_COUNT_VALUE            0x05    /*  Get current count value.                */
++#define GPTU_CALCULATE_DIVIDER          0x06    /*  Calculate timer divider from given freq.*/
++#define GPTU_SET_TIMER                  0x07    /*  Simplified method to setup timer.       */
++#define GPTU_SET_COUNTER                0x08    /*  Simplified method to setup counter.     */
++
++/*
++ *  Data Type Used to Call ioctl
++ */
++struct gptu_ioctl_param {
++    unsigned int                        timer;  /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
++                                                 *  GPTU_SET_COUNTER, this field is ID of expected      *
++                                                 *  timer/counter. If it's zero, a timer/counter would  *
++                                                 *  be dynamically allocated and ID would be stored in  *
++                                                 *  this field.                                         *
++                                                 *  In command GPTU_GET_COUNT_VALUE, this field is      *
++                                                 *  ignored.                                            *
++                                                 *  In other command, this field is ID of timer/counter *
++                                                 *  allocated.                                          */
++    unsigned int                        flag;   /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
++                                                 *  GPTU_SET_COUNTER, this field contains flags to      *
++                                                 *  specify how to configure timer/counter.             *
++                                                 *  In command GPTU_START_TIMER, zero indicate start    *
++                                                 *  and non-zero indicate resume timer/counter.         *
++                                                 *  In other command, this field is ignored.            */
++    unsigned long                       value;  /*  In command GPTU_REQUEST_TIMER, this field contains  *
++                                                 *  init/reload value.                                  *
++                                                 *  In command GPTU_SET_TIMER, this field contains      *
++                                                 *  frequency (0.001Hz) of timer.                       *
++                                                 *  In command GPTU_GET_COUNT_VALUE, current count      *
++                                                 *  value would be stored in this field.                *
++                                                 *  In command GPTU_CALCULATE_DIVIDER, this field       *
++                                                 *  contains frequency wanted, and after calculation,   *
++                                                 *  divider would be stored in this field to overwrite  *
++                                                 *  the frequency.                                      *
++                                                 *  In other command, this field is ignored.            */
++    int                                 pid;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
++                                                 *  if signal is required, this field contains process  *
++                                                 *  ID to which signal would be sent.                   *
++                                                 *  In other command, this field is ignored.            */
++    int                                 sig;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
++                                                 *  if signal is required, this field contains signal   *
++                                                 *  number which would be sent.                         *
++                                                 *  In other command, this field is ignored.            */
++};
++
++/*
++ * ####################################
++ *              Data Type
++ * ####################################
++ */
++typedef void (*timer_callback)(unsigned long arg);
++
++extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
++extern int lq_free_timer(unsigned int);
++extern int lq_start_timer(unsigned int, int);
++extern int lq_stop_timer(unsigned int);
++extern int lq_reset_counter_flags(u32 timer, u32 flags);
++extern int lq_get_count_value(unsigned int, unsigned long *);
++extern u32 lq_cal_divider(unsigned long);
++extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
++extern int lq_set_counter(unsigned int timer, unsigned int flag,
++	u32 reload, unsigned long arg1, unsigned long arg2);
++
++#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,4 +1,4 @@
+-obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
++obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
+ 
+ obj-y += vmmc.o tffs.o
+ 
+--- /dev/null
++++ b/arch/mips/lantiq/xway/timer.c
+@@ -0,0 +1,845 @@
++#ifndef CONFIG_SOC_AMAZON_SE
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/init.h>
++#include <linux/uaccess.h>
++#include <linux/unistd.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++
++#include <asm/irq.h>
++#include <asm/div64.h>
++#include "../clk.h"
++
++#include <lantiq_soc.h>
++#include <lantiq_irq.h>
++#include <lantiq_timer.h>
++
++#define MAX_NUM_OF_32BIT_TIMER_BLOCKS	6
++
++#ifdef TIMER1A
++#define FIRST_TIMER			TIMER1A
++#else
++#define FIRST_TIMER			2
++#endif
++
++/*
++ *  GPTC divider is set or not.
++ */
++#define GPTU_CLC_RMC_IS_SET		0
++
++/*
++ *  Timer Interrupt (IRQ)
++ */
++/*  Must be adjusted when ICU driver is available */
++#define TIMER_INTERRUPT			(INT_NUM_IM3_IRL0 + 22)
++
++/*
++ *  Bits Operation
++ */
++#define GET_BITS(x, msb, lsb)		\
++	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
++#define SET_BITS(x, msb, lsb, value)	\
++	(((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
++	(((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
++
++/*
++ *  GPTU Register Mapping
++ */
++#define LQ_GPTU			(KSEG1 + 0x1E100A00)
++#define LQ_GPTU_CLC		((volatile u32 *)(LQ_GPTU + 0x0000))
++#define LQ_GPTU_ID			((volatile u32 *)(LQ_GPTU + 0x0008))
++#define LQ_GPTU_CON(n, X)		((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_RUN(n, X)		((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_RELOAD(n, X)	((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_COUNT(n, X)	((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
++#define LQ_GPTU_IRNEN		((volatile u32 *)(LQ_GPTU + 0x00F4))
++#define LQ_GPTU_IRNICR		((volatile u32 *)(LQ_GPTU + 0x00F8))
++#define LQ_GPTU_IRNCR		((volatile u32 *)(LQ_GPTU + 0x00FC))
++
++/*
++ *  Clock Control Register
++ */
++#define GPTU_CLC_SMC			GET_BITS(*LQ_GPTU_CLC, 23, 16)
++#define GPTU_CLC_RMC			GET_BITS(*LQ_GPTU_CLC, 15, 8)
++#define GPTU_CLC_FSOE			(*LQ_GPTU_CLC & (1 << 5))
++#define GPTU_CLC_EDIS			(*LQ_GPTU_CLC & (1 << 3))
++#define GPTU_CLC_SPEN			(*LQ_GPTU_CLC & (1 << 2))
++#define GPTU_CLC_DISS			(*LQ_GPTU_CLC & (1 << 1))
++#define GPTU_CLC_DISR			(*LQ_GPTU_CLC & (1 << 0))
++
++#define GPTU_CLC_SMC_SET(value)		SET_BITS(0, 23, 16, (value))
++#define GPTU_CLC_RMC_SET(value)		SET_BITS(0, 15, 8, (value))
++#define GPTU_CLC_FSOE_SET(value)	((value) ? (1 << 5) : 0)
++#define GPTU_CLC_SBWE_SET(value)	((value) ? (1 << 4) : 0)
++#define GPTU_CLC_EDIS_SET(value)	((value) ? (1 << 3) : 0)
++#define GPTU_CLC_SPEN_SET(value)	((value) ? (1 << 2) : 0)
++#define GPTU_CLC_DISR_SET(value)	((value) ? (1 << 0) : 0)
++
++/*
++ *  ID Register
++ */
++#define GPTU_ID_ID			GET_BITS(*LQ_GPTU_ID, 15, 8)
++#define GPTU_ID_CFG			GET_BITS(*LQ_GPTU_ID, 7, 5)
++#define GPTU_ID_REV			GET_BITS(*LQ_GPTU_ID, 4, 0)
++
++/*
++ *  Control Register of Timer/Counter nX
++ *    n is the index of block (1 based index)
++ *    X is either A or B
++ */
++#define GPTU_CON_SRC_EG(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 10))
++#define GPTU_CON_SRC_EXT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 9))
++#define GPTU_CON_SYNC(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 8))
++#define GPTU_CON_EDGE(n, X)		GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
++#define GPTU_CON_INV(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 5))
++#define GPTU_CON_EXT(n, X)		(*LQ_GPTU_CON(n, A) & (1 << 4))	/* Timer/Counter B does not have this bit */
++#define GPTU_CON_STP(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 3))
++#define GPTU_CON_CNT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 2))
++#define GPTU_CON_DIR(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 1))
++#define GPTU_CON_EN(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 0))
++
++#define GPTU_CON_SRC_EG_SET(value)	((value) ? 0 : (1 << 10))
++#define GPTU_CON_SRC_EXT_SET(value)	((value) ? (1 << 9) : 0)
++#define GPTU_CON_SYNC_SET(value)	((value) ? (1 << 8) : 0)
++#define GPTU_CON_EDGE_SET(value)	SET_BITS(0, 7, 6, (value))
++#define GPTU_CON_INV_SET(value)		((value) ? (1 << 5) : 0)
++#define GPTU_CON_EXT_SET(value)		((value) ? (1 << 4) : 0)
++#define GPTU_CON_STP_SET(value)		((value) ? (1 << 3) : 0)
++#define GPTU_CON_CNT_SET(value)		((value) ? (1 << 2) : 0)
++#define GPTU_CON_DIR_SET(value)		((value) ? (1 << 1) : 0)
++
++#define GPTU_RUN_RL_SET(value)		((value) ? (1 << 2) : 0)
++#define GPTU_RUN_CEN_SET(value)		((value) ? (1 << 1) : 0)
++#define GPTU_RUN_SEN_SET(value)		((value) ? (1 << 0) : 0)
++
++#define GPTU_IRNEN_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
++#define GPTU_IRNCR_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
++
++#define TIMER_FLAG_MASK_SIZE(x)		(x & 0x0001)
++#define TIMER_FLAG_MASK_TYPE(x)		(x & 0x0002)
++#define TIMER_FLAG_MASK_STOP(x)		(x & 0x0004)
++#define TIMER_FLAG_MASK_DIR(x)		(x & 0x0008)
++#define TIMER_FLAG_NONE_EDGE		0x0000
++#define TIMER_FLAG_MASK_EDGE(x)		(x & 0x0030)
++#define TIMER_FLAG_REAL			0x0000
++#define TIMER_FLAG_INVERT		0x0040
++#define TIMER_FLAG_MASK_INVERT(x)	(x & 0x0040)
++#define TIMER_FLAG_MASK_TRIGGER(x)	(x & 0x0070)
++#define TIMER_FLAG_MASK_SYNC(x)		(x & 0x0080)
++#define TIMER_FLAG_CALLBACK_IN_HB	0x0200
++#define TIMER_FLAG_MASK_HANDLE(x)	(x & 0x0300)
++#define TIMER_FLAG_MASK_SRC(x)		(x & 0x1000)
++
++struct timer_dev_timer {
++	unsigned int f_irq_on;
++	unsigned int irq;
++	unsigned int flag;
++	unsigned long arg1;
++	unsigned long arg2;
++};
++
++struct timer_dev {
++	struct mutex gptu_mutex;
++	unsigned int number_of_timers;
++	unsigned int occupation;
++	unsigned int f_gptu_on;
++	struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
++};
++
++
++unsigned int ltq_get_fpi_bus_clock(int fpi) {
++	struct clk *clk = clk_get_fpi();
++	return clk_get_rate(clk);
++}
++
++
++static long gptu_ioctl(struct file *, unsigned int, unsigned long);
++static int gptu_open(struct inode *, struct file *);
++static int gptu_release(struct inode *, struct file *);
++
++static struct file_operations gptu_fops = {
++	.owner = THIS_MODULE,
++	.unlocked_ioctl = gptu_ioctl,
++	.open = gptu_open,
++	.release = gptu_release
++};
++
++static struct miscdevice gptu_miscdev = {
++	.minor = MISC_DYNAMIC_MINOR,
++	.name = "gptu",
++	.fops = &gptu_fops,
++};
++
++static struct timer_dev timer_dev;
++
++static irqreturn_t timer_irq_handler(int irq, void *p)
++{
++	unsigned int timer;
++	unsigned int flag;
++	struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
++
++	timer = irq - TIMER_INTERRUPT;
++	if (timer < timer_dev.number_of_timers
++		&& dev_timer == &timer_dev.timer[timer]) {
++		/*  Clear interrupt.    */
++		ltq_w32(1 << timer, LQ_GPTU_IRNCR);
++
++		/*  Call user hanler or signal. */
++		flag = dev_timer->flag;
++		if (!(timer & 0x01)
++			|| TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
++			/* 16-bit timer or timer A of 32-bit timer  */
++			switch (TIMER_FLAG_MASK_HANDLE(flag)) {
++			case TIMER_FLAG_CALLBACK_IN_IRQ:
++			case TIMER_FLAG_CALLBACK_IN_HB:
++				if (dev_timer->arg1)
++					(*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
++				break;
++			case TIMER_FLAG_SIGNAL:
++				send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
++				break;
++			}
++		}
++	}
++	return IRQ_HANDLED;
++}
++
++static inline void lq_enable_gptu(void)
++{
++	struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
++	clk_enable(clk);
++
++	//ltq_pmu_enable(PMU_GPT);
++
++	/*  Set divider as 1, disable write protection for SPEN, enable module. */
++	*LQ_GPTU_CLC =
++		GPTU_CLC_SMC_SET(0x00) |
++		GPTU_CLC_RMC_SET(0x01) |
++		GPTU_CLC_FSOE_SET(0) |
++		GPTU_CLC_SBWE_SET(1) |
++		GPTU_CLC_EDIS_SET(0) |
++		GPTU_CLC_SPEN_SET(0) |
++		GPTU_CLC_DISR_SET(0);
++}
++
++static inline void lq_disable_gptu(void)
++{
++	struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
++	ltq_w32(0x00, LQ_GPTU_IRNEN);
++	ltq_w32(0xfff, LQ_GPTU_IRNCR);
++
++	/*  Set divider as 0, enable write protection for SPEN, disable module. */
++	*LQ_GPTU_CLC =
++		GPTU_CLC_SMC_SET(0x00) |
++		GPTU_CLC_RMC_SET(0x00) |
++		GPTU_CLC_FSOE_SET(0) |
++		GPTU_CLC_SBWE_SET(0) |
++		GPTU_CLC_EDIS_SET(0) |
++		GPTU_CLC_SPEN_SET(0) |
++		GPTU_CLC_DISR_SET(1);
++
++	clk_enable(clk);
++}
++
++int lq_request_timer(unsigned int timer, unsigned int flag,
++	unsigned long value, unsigned long arg1, unsigned long arg2)
++{
++	int ret = 0;
++	unsigned int con_reg, irnen_reg;
++	int n, X;
++
++	if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
++		timer, flag, value);
++
++	if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
++		value &= 0xFFFF;
++	else
++		timer &= ~0x01;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	/*
++	 *  Allocate timer.
++	 */
++	if (timer < FIRST_TIMER) {
++		unsigned int mask;
++		unsigned int shift;
++		/* This takes care of TIMER1B which is the only choice for Voice TAPI system */
++		unsigned int offset = TIMER2A;
++
++		/*
++		 *  Pick up a free timer.
++		 */
++		if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
++			mask = 1 << offset;
++			shift = 1;
++		} else {
++			mask = 3 << offset;
++			shift = 2;
++		}
++		for (timer = offset;
++		     timer < offset + timer_dev.number_of_timers;
++		     timer += shift, mask <<= shift)
++			if (!(timer_dev.occupation & mask)) {
++				timer_dev.occupation |= mask;
++				break;
++			}
++		if (timer >= offset + timer_dev.number_of_timers) {
++			printk("failed![%d]\n", __LINE__);
++			mutex_unlock(&timer_dev.gptu_mutex);
++			return -EINVAL;
++		} else
++			ret = timer;
++	} else {
++		register unsigned int mask;
++
++		/*
++		 *  Check if the requested timer is free.
++		 */
++		mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++		if ((timer_dev.occupation & mask)) {
++			printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
++				__LINE__, mask, timer_dev.occupation);
++			mutex_unlock(&timer_dev.gptu_mutex);
++			return -EBUSY;
++		} else {
++			timer_dev.occupation |= mask;
++			ret = 0;
++		}
++	}
++
++	/*
++	 *  Prepare control register value.
++	 */
++	switch (TIMER_FLAG_MASK_EDGE(flag)) {
++	default:
++	case TIMER_FLAG_NONE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x00);
++		break;
++	case TIMER_FLAG_RISE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x01);
++		break;
++	case TIMER_FLAG_FALL_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x02);
++		break;
++	case TIMER_FLAG_ANY_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x03);
++		break;
++	}
++	if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
++		con_reg |=
++			TIMER_FLAG_MASK_SRC(flag) ==
++			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
++			GPTU_CON_SRC_EXT_SET(0);
++	else
++		con_reg |=
++			TIMER_FLAG_MASK_SRC(flag) ==
++			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
++			GPTU_CON_SRC_EG_SET(0);
++	con_reg |=
++		TIMER_FLAG_MASK_SYNC(flag) ==
++		TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
++		GPTU_CON_SYNC_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_INVERT(flag) ==
++		TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_SIZE(flag) ==
++		TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
++		GPTU_CON_EXT_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_STOP(flag) ==
++		TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
++	con_reg |=
++		TIMER_FLAG_MASK_TYPE(flag) ==
++		TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
++		GPTU_CON_CNT_SET(1);
++	con_reg |=
++		TIMER_FLAG_MASK_DIR(flag) ==
++		TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
++
++	/*
++	 *  Fill up running data.
++	 */
++	timer_dev.timer[timer - FIRST_TIMER].flag = flag;
++	timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
++	timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
++
++	/*
++	 *  Enable GPTU module.
++	 */
++	if (!timer_dev.f_gptu_on) {
++		lq_enable_gptu();
++		timer_dev.f_gptu_on = 1;
++	}
++
++	/*
++	 *  Enable IRQ.
++	 */
++	if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
++		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
++			timer_dev.timer[timer - FIRST_TIMER].arg1 =
++				(unsigned long) find_task_by_vpid((int) arg1);
++
++		irnen_reg = 1 << (timer - FIRST_TIMER);
++
++		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
++		    || (TIMER_FLAG_MASK_HANDLE(flag) ==
++			TIMER_FLAG_CALLBACK_IN_IRQ
++			&& timer_dev.timer[timer - FIRST_TIMER].arg1)) {
++			enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
++			timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
++		}
++	} else
++		irnen_reg = 0;
++
++	/*
++	 *  Write config register, reload value and enable interrupt.
++	 */
++	n = timer >> 1;
++	X = timer & 0x01;
++	*LQ_GPTU_CON(n, X) = con_reg;
++	*LQ_GPTU_RELOAD(n, X) = value;
++	/* printk("reload value = %d\n", (u32)value); */
++	*LQ_GPTU_IRNEN |= irnen_reg;
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++	printk("successful!\n");
++	return ret;
++}
++EXPORT_SYMBOL(lq_request_timer);
++
++int lq_free_timer(unsigned int timer)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	if (GPTU_CON_EN(n, X))
++		*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
++
++	*LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
++	*LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
++
++	if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
++		disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
++		timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
++	}
++
++	timer_dev.occupation &= ~mask;
++	if (!timer_dev.occupation && timer_dev.f_gptu_on) {
++		lq_disable_gptu();
++		timer_dev.f_gptu_on = 0;
++	}
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_free_timer);
++
++int lq_start_timer(unsigned int timer, int is_resume)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) ==
++	TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
++
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_start_timer);
++
++int lq_stop_timer(unsigned int timer)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER
++	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_stop_timer);
++
++int lq_reset_counter_flags(u32 timer, u32 flags)
++{
++	unsigned int oflag;
++	unsigned int mask, con_reg;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	switch (TIMER_FLAG_MASK_EDGE(flags)) {
++	default:
++	case TIMER_FLAG_NONE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x00);
++		break;
++	case TIMER_FLAG_RISE_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x01);
++		break;
++	case TIMER_FLAG_FALL_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x02);
++		break;
++	case TIMER_FLAG_ANY_EDGE:
++		con_reg = GPTU_CON_EDGE_SET(0x03);
++		break;
++	}
++	if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
++		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
++	else
++		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
++	con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
++	con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
++	con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
++	con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
++	con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
++	con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
++
++	timer_dev.timer[timer - FIRST_TIMER].flag = flags;
++	if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
++		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*LQ_GPTU_CON(n, X) = con_reg;
++	smp_wmb();
++	mutex_unlock(&timer_dev.gptu_mutex);
++	return 0;
++}
++EXPORT_SYMBOL(lq_reset_counter_flags);
++
++int lq_get_count_value(unsigned int timer, unsigned long *value)
++{
++	unsigned int flag;
++	unsigned int mask;
++	int n, X;
++
++	if (!timer_dev.f_gptu_on)
++		return -EINVAL;
++
++	if (timer < FIRST_TIMER
++	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++		return -EINVAL;
++
++	mutex_lock(&timer_dev.gptu_mutex);
++
++	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++		timer &= ~0x01;
++
++	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++	if (((timer_dev.occupation & mask) ^ mask)) {
++		mutex_unlock(&timer_dev.gptu_mutex);
++		return -EINVAL;
++	}
++
++	n = timer >> 1;
++	X = timer & 0x01;
++
++	*value = *LQ_GPTU_COUNT(n, X);
++
++
++	mutex_unlock(&timer_dev.gptu_mutex);
++
++	return 0;
++}
++EXPORT_SYMBOL(lq_get_count_value);
++
++u32 lq_cal_divider(unsigned long freq)
++{
++	u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
++	u32 clock_divider = 1;
++	module_freq = fpi * 1000;
++	do_div(module_freq, clock_divider * freq);
++	return module_freq;
++}
++EXPORT_SYMBOL(lq_cal_divider);
++
++int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
++	int is_ext_src, unsigned int handle_flag, unsigned long arg1,
++	unsigned long arg2)
++{
++	unsigned long divider;
++	unsigned int flag;
++
++	divider = lq_cal_divider(freq);
++	if (divider == 0)
++		return -EINVAL;
++	flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
++		| (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
++		| (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
++		| TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
++		| TIMER_FLAG_MASK_HANDLE(handle_flag);
++
++	printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
++		timer, freq, divider);
++	return lq_request_timer(timer, flag, divider, arg1, arg2);
++}
++EXPORT_SYMBOL(lq_set_timer);
++
++int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
++	unsigned long arg1, unsigned long arg2)
++{
++	printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
++	return lq_request_timer(timer, flag, reload, arg1, arg2);
++}
++EXPORT_SYMBOL(lq_set_counter);
++
++static long gptu_ioctl(struct file *file, unsigned int cmd,
++	unsigned long arg)
++{
++	int ret;
++	struct gptu_ioctl_param param;
++
++	if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
++		return -EFAULT;
++	copy_from_user(&param, (void *) arg, sizeof(param));
++
++	if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
++	       || GPTU_SET_COUNTER) && param.timer < 2)
++	     || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
++	    && !access_ok(VERIFY_WRITE, arg,
++			   sizeof(struct gptu_ioctl_param)))
++		return -EFAULT;
++
++	switch (cmd) {
++	case GPTU_REQUEST_TIMER:
++		ret = lq_request_timer(param.timer, param.flag, param.value,
++				     (unsigned long) param.pid,
++				     (unsigned long) param.sig);
++		if (ret > 0) {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      timer, &ret, sizeof(&ret));
++			ret = 0;
++		}
++		break;
++	case GPTU_FREE_TIMER:
++		ret = lq_free_timer(param.timer);
++		break;
++	case GPTU_START_TIMER:
++		ret = lq_start_timer(param.timer, param.flag);
++		break;
++	case GPTU_STOP_TIMER:
++		ret = lq_stop_timer(param.timer);
++		break;
++	case GPTU_GET_COUNT_VALUE:
++		ret = lq_get_count_value(param.timer, &param.value);
++		if (!ret)
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      value, &param.value,
++				      sizeof(param.value));
++		break;
++	case GPTU_CALCULATE_DIVIDER:
++		param.value = lq_cal_divider(param.value);
++		if (param.value == 0)
++			ret = -EINVAL;
++		else {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      value, &param.value,
++				      sizeof(param.value));
++			ret = 0;
++		}
++		break;
++	case GPTU_SET_TIMER:
++		ret = lq_set_timer(param.timer, param.value,
++				 TIMER_FLAG_MASK_STOP(param.flag) !=
++				 TIMER_FLAG_ONCE ? 1 : 0,
++				 TIMER_FLAG_MASK_SRC(param.flag) ==
++				 TIMER_FLAG_EXT_SRC ? 1 : 0,
++				 TIMER_FLAG_MASK_HANDLE(param.flag) ==
++				 TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
++				 TIMER_FLAG_NO_HANDLE,
++				 (unsigned long) param.pid,
++				 (unsigned long) param.sig);
++		if (ret > 0) {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      timer, &ret, sizeof(&ret));
++			ret = 0;
++		}
++		break;
++	case GPTU_SET_COUNTER:
++		lq_set_counter(param.timer, param.flag, param.value, 0, 0);
++		if (ret > 0) {
++			copy_to_user(&((struct gptu_ioctl_param *) arg)->
++				      timer, &ret, sizeof(&ret));
++			ret = 0;
++		}
++		break;
++	default:
++		ret = -ENOTTY;
++	}
++
++	return ret;
++}
++
++static int gptu_open(struct inode *inode, struct file *file)
++{
++	return 0;
++}
++
++static int gptu_release(struct inode *inode, struct file *file)
++{
++	return 0;
++}
++
++int __init lq_gptu_init(void)
++{
++	int ret;
++	unsigned int i;
++
++	ltq_w32(0, LQ_GPTU_IRNEN);
++	ltq_w32(0xfff, LQ_GPTU_IRNCR);
++
++	memset(&timer_dev, 0, sizeof(timer_dev));
++	mutex_init(&timer_dev.gptu_mutex);
++
++	lq_enable_gptu();
++	timer_dev.number_of_timers = GPTU_ID_CFG * 2;
++	lq_disable_gptu();
++	if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
++		timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
++	printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
++
++	ret = misc_register(&gptu_miscdev);
++	if (ret) {
++		printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
++		return ret;
++	} else {
++		printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
++	}
++
++	for (i = 0; i < timer_dev.number_of_timers; i++) {
++		ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
++		if (ret) {
++			for (; i >= 0; i--)
++				free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
++			misc_deregister(&gptu_miscdev);
++			printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
++			return ret;
++		} else {
++			timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
++			disable_irq(timer_dev.timer[i].irq);
++			printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
++		}
++	}
++
++	return 0;
++}
++
++void __exit lq_gptu_exit(void)
++{
++	unsigned int i;
++
++	for (i = 0; i < timer_dev.number_of_timers; i++) {
++		if (timer_dev.timer[i].f_irq_on)
++			disable_irq(timer_dev.timer[i].irq);
++		free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
++	}
++	lq_disable_gptu();
++	misc_deregister(&gptu_miscdev);
++}
++
++module_init(lq_gptu_init);
++module_exit(lq_gptu_exit);
++
++#endif
diff --git a/target/linux/lantiq/patches-4.4/0012-pinctrl-lantiq-fix-up-pinmux.patch b/target/linux/lantiq/patches-4.4/0012-pinctrl-lantiq-fix-up-pinmux.patch
new file mode 100644
index 0000000..e03fe08
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0012-pinctrl-lantiq-fix-up-pinmux.patch
@@ -0,0 +1,68 @@
+From 25494c55a4007a1409f53ddbafd661636e47ea34 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Fri, 9 Aug 2013 20:38:15 +0200
+Subject: [PATCH 12/36] pinctrl/lantiq: fix up pinmux
+
+We found out how to set the gphy led pinmuxing.
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/pinctrl/pinctrl-xway.c |   28 ++++++++++++++++++++++++++--
+ 1 file changed, 26 insertions(+), 2 deletions(-)
+
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -609,10 +609,9 @@ static struct pinctrl_desc xway_pctrl_de
+ 	.confops	= &xway_pinconf_ops,
+ };
+ 
+-static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
++static int mux_apply(struct ltq_pinmux_info *info,
+ 				int pin, int mux)
+ {
+-	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ 	int port = PORT(pin);
+ 	u32 alt1_reg = GPIO_ALT1(pin);
+ 
+@@ -632,6 +631,14 @@ static inline int xway_mux_apply(struct
+ 	return 0;
+ }
+ 
++static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
++				int pin, int mux)
++{
++	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
++
++	return mux_apply(info, pin, mux);
++}
++
+ static const struct ltq_cfg_param xway_cfg_params[] = {
+ 	{"lantiq,pull",		LTQ_PINCONF_PARAM_PULL},
+ 	{"lantiq,open-drain",	LTQ_PINCONF_PARAM_OPEN_DRAIN},
+@@ -682,6 +689,18 @@ static int xway_gpio_dir_out(struct gpio
+ 	return 0;
+ }
+ 
++static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
++{
++	struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
++	int i;
++
++	for (i = 0; i < info->num_exin; i++)
++		if (info->exin[i] == offset)
++			return ltq_eiu_get_irq(i);
++
++	return -1;
++}
++
+ static struct gpio_chip xway_chip = {
+ 	.label = "gpio-xway",
+ 	.direction_input = xway_gpio_dir_in,
+@@ -690,6 +709,7 @@ static struct gpio_chip xway_chip = {
+ 	.set = xway_gpio_set,
+ 	.request = gpiochip_generic_request,
+ 	.free = gpiochip_generic_free,
++	.to_irq = xway_gpio_to_irq,
+ 	.base = -1,
+ };
+ 
diff --git a/target/linux/lantiq/patches-4.4/0013-MTD-lantiq-xway-fix-invalid-operator.patch b/target/linux/lantiq/patches-4.4/0013-MTD-lantiq-xway-fix-invalid-operator.patch
new file mode 100644
index 0000000..c6d3819
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0013-MTD-lantiq-xway-fix-invalid-operator.patch
@@ -0,0 +1,24 @@
+From 8e34da603f442624bb70e887d8f42064bb924224 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 28 Jul 2013 18:03:54 +0200
+Subject: [PATCH 13/36] MTD: lantiq: xway: fix invalid operator
+
+xway_read_byte should use a logic or and not an add operator when working out
+the nand address.
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -124,7 +124,7 @@ static unsigned char xway_read_byte(stru
+ 	int ret;
+ 
+ 	spin_lock_irqsave(&ebu_lock, flags);
+-	ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
++	ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
+ 	spin_unlock_irqrestore(&ebu_lock, flags);
+ 
+ 	return ret;
diff --git a/target/linux/lantiq/patches-4.4/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch b/target/linux/lantiq/patches-4.4/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
new file mode 100644
index 0000000..6a7785b
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
@@ -0,0 +1,44 @@
+From b454cefd675fc1bd3d8c690c1bd1d8f4678e9922 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 28 Jul 2013 18:06:39 +0200
+Subject: [PATCH 14/36] MTD: lantiq: xway: the latched command should be
+ persistent
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c |   12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -54,6 +54,8 @@
+ #define NAND_CON_CSMUX		(1 << 1)
+ #define NAND_CON_NANDM		1
+ 
++static u32 xway_latchcmd;
++
+ static void xway_reset_chip(struct nand_chip *chip)
+ {
+ 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+@@ -94,17 +96,15 @@ static void xway_cmd_ctrl(struct mtd_inf
+ 	unsigned long flags;
+ 
+ 	if (ctrl & NAND_CTRL_CHANGE) {
+-		nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
+ 		if (ctrl & NAND_CLE)
+-			nandaddr |= NAND_WRITE_CMD;
+-		else
+-			nandaddr |= NAND_WRITE_ADDR;
+-		this->IO_ADDR_W = (void __iomem *) nandaddr;
++			xway_latchcmd = NAND_WRITE_CMD;
++		else if (ctrl & NAND_ALE)
++			xway_latchcmd = NAND_WRITE_ADDR;
+ 	}
+ 
+ 	if (cmd != NAND_CMD_NONE) {
+ 		spin_lock_irqsave(&ebu_lock, flags);
+-		writeb(cmd, this->IO_ADDR_W);
++		writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
+ 		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+ 			;
+ 		spin_unlock_irqrestore(&ebu_lock, flags);
diff --git a/target/linux/lantiq/patches-4.4/0015-MTD-lantiq-xway-remove-endless-loop.patch b/target/linux/lantiq/patches-4.4/0015-MTD-lantiq-xway-remove-endless-loop.patch
new file mode 100644
index 0000000..4bd1668
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0015-MTD-lantiq-xway-remove-endless-loop.patch
@@ -0,0 +1,41 @@
+From 76e153079f02d26e3357302d2886a0c8aaaec64d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 28 Jul 2013 18:02:06 +0200
+Subject: [PATCH 15/36] MTD: lantiq: xway: remove endless loop
+
+The reset loop logic could run into a endless loop. Lets fix it as requested.
+
+--> http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c |   10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -59,16 +59,22 @@ static u32 xway_latchcmd;
+ static void xway_reset_chip(struct nand_chip *chip)
+ {
+ 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
++	unsigned long timeout;
+ 	unsigned long flags;
+ 
+ 	nandaddr &= ~NAND_WRITE_ADDR;
+ 	nandaddr |= NAND_WRITE_CMD;
+ 
+ 	/* finish with a reset */
++	timeout = jiffies + msecs_to_jiffies(20);
++
+ 	spin_lock_irqsave(&ebu_lock, flags);
+ 	writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
+-	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+-		;
++	do {
++		if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++			break;
++		cond_resched();
++	} while (!time_after_eq(jiffies, timeout));
+ 	spin_unlock_irqrestore(&ebu_lock, flags);
+ }
+ 
diff --git a/target/linux/lantiq/patches-4.4/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch b/target/linux/lantiq/patches-4.4/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
new file mode 100644
index 0000000..072caf6
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
@@ -0,0 +1,55 @@
+From 65df9d63eaee02c25e879b33dd42aceb78e57842 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 28 Jul 2013 17:59:51 +0200
+Subject: [PATCH 16/36] MTD: lantiq: xway: add missing write_buf and read_buf
+ to nand driver
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c |   28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -136,6 +136,32 @@ static unsigned char xway_read_byte(stru
+ 	return ret;
+ }
+ 
++static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len)
++{
++	struct nand_chip *this = mtd->priv;
++	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
++	unsigned long flags;
++	int i;
++
++	spin_lock_irqsave(&ebu_lock, flags);
++	for (i = 0; i < len; i++)
++		buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
++	spin_unlock_irqrestore(&ebu_lock, flags);
++}
++
++static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
++{
++	struct nand_chip *this = mtd->priv;
++	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
++	unsigned long flags;
++	int i;
++
++	spin_lock_irqsave(&ebu_lock, flags);
++	for (i = 0; i < len; i++)
++		ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA));
++	spin_unlock_irqrestore(&ebu_lock, flags);
++}
++
+ static int xway_nand_probe(struct platform_device *pdev)
+ {
+ 	struct nand_chip *this = platform_get_drvdata(pdev);
+@@ -177,6 +203,8 @@ static struct platform_nand_data xway_na
+ 		.dev_ready	= xway_dev_ready,
+ 		.select_chip	= xway_select_chip,
+ 		.read_byte	= xway_read_byte,
++		.read_buf	= xway_read_buf,
++		.write_buf	= xway_write_buf,
+ 	}
+ };
+ 
diff --git a/target/linux/lantiq/patches-4.4/0017-MTD-xway-fix-nand-locking.patch b/target/linux/lantiq/patches-4.4/0017-MTD-xway-fix-nand-locking.patch
new file mode 100644
index 0000000..737469a
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0017-MTD-xway-fix-nand-locking.patch
@@ -0,0 +1,89 @@
+From aa705c1b0860da91f2ed1a4c0b57337e6de689e1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 7 Aug 2014 18:55:31 +0200
+Subject: [PATCH 17/36] MTD: xway: fix nand locking
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c |   15 +++------------
+ 1 file changed, 3 insertions(+), 12 deletions(-)
+
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -80,13 +80,16 @@ static void xway_reset_chip(struct nand_
+ 
+ static void xway_select_chip(struct mtd_info *mtd, int chip)
+ {
++	static unsigned long csflags;
+ 
+ 	switch (chip) {
+ 	case -1:
+ 		ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
+ 		ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
++		spin_unlock_irqrestore(&ebu_lock, csflags);
+ 		break;
+ 	case 0:
++		spin_lock_irqsave(&ebu_lock, csflags);
+ 		ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
+ 		ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
+ 		break;
+@@ -99,7 +102,6 @@ static void xway_cmd_ctrl(struct mtd_inf
+ {
+ 	struct nand_chip *this = mtd->priv;
+ 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+-	unsigned long flags;
+ 
+ 	if (ctrl & NAND_CTRL_CHANGE) {
+ 		if (ctrl & NAND_CLE)
+@@ -109,11 +111,9 @@ static void xway_cmd_ctrl(struct mtd_inf
+ 	}
+ 
+ 	if (cmd != NAND_CMD_NONE) {
+-		spin_lock_irqsave(&ebu_lock, flags);
+ 		writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
+ 		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+ 			;
+-		spin_unlock_irqrestore(&ebu_lock, flags);
+ 	}
+ }
+ 
+@@ -126,12 +126,9 @@ static unsigned char xway_read_byte(stru
+ {
+ 	struct nand_chip *this = mtd->priv;
+ 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
+-	unsigned long flags;
+ 	int ret;
+ 
+-	spin_lock_irqsave(&ebu_lock, flags);
+ 	ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
+-	spin_unlock_irqrestore(&ebu_lock, flags);
+ 
+ 	return ret;
+ }
+@@ -140,26 +137,20 @@ static void xway_read_buf(struct mtd_inf
+ {
+ 	struct nand_chip *this = mtd->priv;
+ 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
+-	unsigned long flags;
+ 	int i;
+ 
+-	spin_lock_irqsave(&ebu_lock, flags);
+ 	for (i = 0; i < len; i++)
+ 		buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
+-	spin_unlock_irqrestore(&ebu_lock, flags);
+ }
+ 
+ static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+ {
+ 	struct nand_chip *this = mtd->priv;
+ 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+-	unsigned long flags;
+ 	int i;
+ 
+-	spin_lock_irqsave(&ebu_lock, flags);
+ 	for (i = 0; i < len; i++)
+ 		ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA));
+-	spin_unlock_irqrestore(&ebu_lock, flags);
+ }
+ 
+ static int xway_nand_probe(struct platform_device *pdev)
diff --git a/target/linux/lantiq/patches-4.4/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-4.4/0018-MTD-nand-lots-of-xrx200-fixes.patch
new file mode 100644
index 0000000..5500861
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0018-MTD-nand-lots-of-xrx200-fixes.patch
@@ -0,0 +1,125 @@
+From 997a8965db8417266bea3fbdcfa3e5655a1b52fa Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Tue, 9 Sep 2014 23:12:15 +0200
+Subject: [PATCH 18/36] MTD: nand: lots of xrx200 fixes
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c |   63 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 63 insertions(+)
+
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -54,8 +54,27 @@
+ #define NAND_CON_CSMUX		(1 << 1)
+ #define NAND_CON_NANDM		1
+ 
++#define DANUBE_PCI_REG32( addr )    (*(volatile u32 *)(addr))
++#define PCI_CR_PR_OFFSET	    (KSEG1+0x1E105400)
++#define PCI_CR_PC_ARB		    (PCI_CR_PR_OFFSET + 0x0080)
++
+ static u32 xway_latchcmd;
+ 
++/*
++ * req_mask provides a mechanism to prevent interference between
++ * nand and pci (probably only relevant for the BT Home Hub 2B).
++ * Setting it causes the corresponding pci req pins to be masked
++ * during nand access, and also moves ebu locking from the read/write
++ * functions to the chip select function to ensure that the whole
++ * operation runs with interrupts disabled.
++ * In addition it switches on some extra waiting in xway_cmd_ctrl().
++ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled,
++ * which in turn seems to be necessary for the nor chip to be recognised
++ * reliably, on a board (Home Hub 2B again) which has both nor and nand.
++ */
++
++static __be32 req_mask = 0;
++
+ static void xway_reset_chip(struct nand_chip *chip)
+ {
+ 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+@@ -86,12 +105,24 @@ static void xway_select_chip(struct mtd_
+ 	case -1:
+ 		ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
+ 		ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
++
++		if (req_mask) {
++			/* Unmask all external PCI request */
++			DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16);
++		}
+ 		spin_unlock_irqrestore(&ebu_lock, csflags);
++
+ 		break;
+ 	case 0:
+ 		spin_lock_irqsave(&ebu_lock, csflags);
++		if (req_mask) {
++			/* Mask all external PCI request */
++			DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16);
++		}
++
+ 		ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
+ 		ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
++
+ 		break;
+ 	default:
+ 		BUG();
+@@ -103,6 +134,12 @@ static void xway_cmd_ctrl(struct mtd_inf
+ 	struct nand_chip *this = mtd->priv;
+ 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+ 
++	if (req_mask) {
++		if (cmd != NAND_CMD_STATUS)
++			ltq_ebu_w32(EBU_NAND_WAIT, 0); /* Clear nand ready */
++	}
++
++
+ 	if (ctrl & NAND_CTRL_CHANGE) {
+ 		if (ctrl & NAND_CLE)
+ 			xway_latchcmd = NAND_WRITE_CMD;
+@@ -115,6 +152,24 @@ static void xway_cmd_ctrl(struct mtd_inf
+ 		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+ 			;
+ 	}
++
++	if (req_mask) {
++	       /*
++		* program and erase have their own busy handlers
++		* status and sequential in needs no delay
++		*/
++		switch (cmd) {
++			case NAND_CMD_ERASE1:
++			case NAND_CMD_SEQIN:
++			case NAND_CMD_STATUS:
++			case NAND_CMD_READID:
++			return;
++		}
++
++		/* wait until command is processed */
++		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0)
++			;
++	}
+ }
+ 
+ static int xway_dev_ready(struct mtd_info *mtd)
+@@ -157,6 +212,8 @@ static int xway_nand_probe(struct platfo
+ {
+ 	struct nand_chip *this = platform_get_drvdata(pdev);
+ 	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
++	const __be32 *req_mask_ptr = of_get_property(pdev->dev.of_node,
++					"req-mask", NULL);
+ 	const __be32 *cs = of_get_property(pdev->dev.of_node,
+ 					"lantiq,cs", NULL);
+ 	u32 cs_flag = 0;
+@@ -165,6 +222,12 @@ static int xway_nand_probe(struct platfo
+ 	if (cs && (*cs == 1))
+ 		cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
+ 
++	/*
++	 * Load the PCI req lines to mask from the device tree. If the
++	 * property is not present, setting req_mask to 0 disables masking.
++	 */
++	req_mask = (req_mask_ptr ? *req_mask_ptr : 0);
++
+ 	/* setup the EBU to run in NAND mode on our base addr */
+ 	ltq_ebu_w32(CPHYSADDR(nandaddr)
+ 		| ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
diff --git a/target/linux/lantiq/patches-4.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-4.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
new file mode 100644
index 0000000..3b38a95
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
@@ -0,0 +1,25 @@
+From e3b20f04e9f9cae1babe091fdc1d08d7703ae344 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 7 Aug 2014 18:18:00 +0200
+Subject: [PATCH 20/36] MTD: lantiq: handle NO_XIP on cfi0001 flash
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/mtd/maps/lantiq-flash.c |    6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- a/drivers/mtd/maps/lantiq-flash.c
++++ b/drivers/mtd/maps/lantiq-flash.c
+@@ -138,7 +138,11 @@ ltq_mtd_probe(struct platform_device *pd
+ 	if (!ltq_mtd->map)
+ 		return -ENOMEM;
+ 
+-	ltq_mtd->map->phys = ltq_mtd->res->start;
++	if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
++		ltq_mtd->map->phys = NO_XIP;
++	else
++		ltq_mtd->map->phys = ltq_mtd->res->start;
++	ltq_mtd->res->start;
+ 	ltq_mtd->map->size = resource_size(ltq_mtd->res);
+ 	ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
+ 	if (IS_ERR(ltq_mtd->map->virt))
diff --git a/target/linux/lantiq/patches-4.4/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-4.4/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
new file mode 100644
index 0000000..25f3fff
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
@@ -0,0 +1,44 @@
+From 4400e1f593ea40a51912128adb4f53d59e62cad8 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Wed, 10 Sep 2014 22:40:18 +0200
+Subject: [PATCH 22/36] MTD: m25p80: allow loading mtd name from OF
+
+In accordance with the physmap flash we should honour the linux,mtd-name
+property when deciding what name the mtd device has.
+
+Signed-off-by: Thomas Langer <thomas.langer at lantiq.com>
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/mtd/devices/m25p80.c |    6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -19,6 +19,7 @@
+ #include <linux/errno.h>
+ #include <linux/module.h>
+ #include <linux/device.h>
++#include <linux/of.h>
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+@@ -182,6 +183,10 @@ static int m25p_probe(struct spi_device
+ 	enum read_mode mode = SPI_NOR_NORMAL;
+ 	char *flash_name = NULL;
+ 	int ret;
++	const char __maybe_unused	*of_mtd_name = NULL;
++
++	of_property_read_string(spi->dev.of_node,
++		"linux,mtd-name", &of_mtd_name);
+ 
+ 	data = dev_get_platdata(&spi->dev);
+ 
+@@ -212,6 +217,8 @@ static int m25p_probe(struct spi_device
+ 
+ 	if (data && data->name)
+ 		nor->mtd.name = data->name;
++	else if (of_mtd_name)
++		nor->mtd.name = of_mtd_name;
+ 
+ 	/* For some (historical?) reason many platforms provide two different
+ 	 * names in flash_platform_data: "name" and "type". Quite often name is
diff --git a/target/linux/lantiq/patches-4.4/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-4.4/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
new file mode 100644
index 0000000..191ccf2
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
@@ -0,0 +1,537 @@
+From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 7 Aug 2014 18:15:36 +0200
+Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/net/phy/Kconfig  |    5 +
+ drivers/net/phy/Makefile |    1 +
+ drivers/net/phy/lantiq.c |  231 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 237 insertions(+)
+ create mode 100644 drivers/net/phy/lantiq.c
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -202,6 +202,11 @@ config RTL8306_PHY
+ 	tristate "Driver for Realtek RTL8306S switches"
+ 	select SWCONFIG
+ 
++config LANTIQ_PHY
++	tristate "Driver for Lantiq PHYs"
++	---help---
++	  Supports the 11G and 22E PHYs.
++
+ config FIXED_PHY
+ 	tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -46,6 +46,7 @@ obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
+ obj-$(CONFIG_DP83867_PHY)	+= dp83867.o
+ obj-$(CONFIG_STE10XP)		+= ste10Xp.o
+ obj-$(CONFIG_MICREL_PHY)	+= micrel.o
++obj-$(CONFIG_LANTIQ_PHY)        += lantiq.o
+ obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
+ obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
+ obj-$(CONFIG_AT803X_PHY)	+= at803x.o
+--- /dev/null
++++ b/drivers/net/phy/lantiq.c
+@@ -0,0 +1,278 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License as published by
++ *   the Free Software Foundation; either version 2 of the License, or
++ *   (at your option) any later version.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck at googlemail.com>
++ */
++
++#include <linux/module.h>
++#include <linux/phy.h>
++#include <linux/of.h>
++
++#define MII_MMDCTRL		0x0d
++#define MII_MMDDATA		0x0e
++
++#define MII_VR9_11G_IMASK	0x19	/* interrupt mask */
++#define MII_VR9_11G_ISTAT	0x1a	/* interrupt status */
++
++#define INT_VR9_11G_WOL		BIT(15)	/* Wake-On-LAN */
++#define INT_VR9_11G_ANE		BIT(11)	/* Auto-Neg error */
++#define INT_VR9_11G_ANC		BIT(10)	/* Auto-Neg complete */
++#define INT_VR9_11G_ADSC	BIT(5)	/* Link auto-downspeed detect */
++#define INT_VR9_11G_DXMC	BIT(2)	/* Duplex mode change */
++#define INT_VR9_11G_LSPC	BIT(1)	/* Link speed change */
++#define INT_VR9_11G_LSTC	BIT(0)	/* Link state change */
++#define INT_VR9_11G_MASK	(INT_VR9_11G_LSTC | INT_VR9_11G_ADSC)
++
++#define ADVERTISED_MPD		BIT(10)	/* Multi-port device */
++
++#define MMD_DEVAD		0x1f
++#define MMD_ACTYPE_SHIFT	14
++#define MMD_ACTYPE_ADDRESS	(0 << MMD_ACTYPE_SHIFT)
++#define MMD_ACTYPE_DATA		(1 << MMD_ACTYPE_SHIFT)
++#define MMD_ACTYPE_DATA_PI	(2 << MMD_ACTYPE_SHIFT)
++#define MMD_ACTYPE_DATA_PIWR	(3 << MMD_ACTYPE_SHIFT)
++
++static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev,
++						u16 regnum)
++{
++	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
++	phy_write(phydev, MII_MMDDATA, regnum);
++	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
++
++	return phy_read(phydev, MII_MMDDATA);
++}
++
++static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev,
++						u16 regnum, u16 val)
++{
++	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
++	phy_write(phydev, MII_MMDDATA, regnum);
++	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
++	phy_write(phydev, MII_MMDDATA, val);
++
++	return 0;
++}
++
++#if IS_ENABLED(CONFIG_OF_MDIO)
++static int vr9_gphy_of_reg_init(struct phy_device *phydev)
++{
++	u32 tmp;
++
++	/* store the led values if one was passed by the devicetree */
++	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledch", &tmp))
++		vr9_gphy_mmd_write(phydev, 0x1e0, tmp);
++
++	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledcl", &tmp))
++		vr9_gphy_mmd_write(phydev, 0x1e1, tmp);
++
++	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0h", &tmp))
++		vr9_gphy_mmd_write(phydev, 0x1e2, tmp);
++
++	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0l", &tmp))
++		vr9_gphy_mmd_write(phydev, 0x1e3, tmp);
++
++	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1h", &tmp))
++		vr9_gphy_mmd_write(phydev, 0x1e4, tmp);
++
++	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1l", &tmp))
++		vr9_gphy_mmd_write(phydev, 0x1e5, tmp);
++	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2h", &tmp))
++		vr9_gphy_mmd_write(phydev, 0x1e6, tmp);
++
++	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2l", &tmp))
++		vr9_gphy_mmd_write(phydev, 0x1e7, tmp);
++
++	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3h", &tmp))
++		vr9_gphy_mmd_write(phydev, 0x1e8, tmp);
++
++	if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3l", &tmp))
++		vr9_gphy_mmd_write(phydev, 0x1e9, tmp);
++
++	return 0;
++}
++#else
++static int vr9_gphy_of_reg_init(struct phy_device *phydev)
++{
++	return 0;
++}
++#endif /* CONFIG_OF_MDIO */
++
++static int vr9_gphy_config_init(struct phy_device *phydev)
++{
++	int err;
++
++	dev_dbg(&phydev->dev, "%s\n", __func__);
++
++	/* Mask all interrupts */
++	err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
++	if (err)
++		return err;
++
++	/* Clear all pending interrupts */
++	phy_read(phydev, MII_VR9_11G_ISTAT);
++
++	vr9_gphy_mmd_write(phydev, 0x1e0, 0xc5);
++	vr9_gphy_mmd_write(phydev, 0x1e1, 0x67);
++	vr9_gphy_mmd_write(phydev, 0x1e2, 0x42);
++	vr9_gphy_mmd_write(phydev, 0x1e3, 0x10);
++	vr9_gphy_mmd_write(phydev, 0x1e4, 0x70);
++	vr9_gphy_mmd_write(phydev, 0x1e5, 0x03);
++	vr9_gphy_mmd_write(phydev, 0x1e6, 0x20);
++	vr9_gphy_mmd_write(phydev, 0x1e7, 0x00);
++	vr9_gphy_mmd_write(phydev, 0x1e8, 0x40);
++	vr9_gphy_mmd_write(phydev, 0x1e9, 0x20);
++
++	vr9_gphy_of_reg_init(phydev);
++
++	return 0;
++}
++
++static int vr9_gphy_config_aneg(struct phy_device *phydev)
++{
++	int reg, err;
++
++	/* Advertise as multi-port device */
++	reg = phy_read(phydev, MII_CTRL1000);
++	reg |= ADVERTISED_MPD;
++	err = phy_write(phydev, MII_CTRL1000, reg);
++	if (err)
++		return err;
++
++	return genphy_config_aneg(phydev);
++}
++
++static int vr9_gphy_ack_interrupt(struct phy_device *phydev)
++{
++	int reg;
++
++	/*
++	 * Possible IRQ numbers:
++	 * - IM3_IRL18 for GPHY0
++	 * - IM3_IRL17 for GPHY1
++	 *
++	 * Due to a silicon bug IRQ lines are not really independent from
++	 * each other. Sometimes the two lines are driven at the same time
++	 * if only one GPHY core raises the interrupt.
++	 */
++
++	reg = phy_read(phydev, MII_VR9_11G_ISTAT);
++
++	return (reg < 0) ? reg : 0;
++}
++
++static int vr9_gphy_did_interrupt(struct phy_device *phydev)
++{
++	int reg;
++
++	reg = phy_read(phydev, MII_VR9_11G_ISTAT);
++
++	return reg > 0;
++}
++
++static int vr9_gphy_config_intr(struct phy_device *phydev)
++{
++	int err;
++
++	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
++		err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK);
++	else
++		err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
++
++	return err;
++}
++
++static struct phy_driver lantiq_phy[] = {
++	{
++		.phy_id		= 0xd565a400,
++		.phy_id_mask	= 0xfffffff8,
++		.name		= "Lantiq XWAY PEF7071",
++		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
++		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
++		.config_init	= vr9_gphy_config_init,
++		.config_aneg	= vr9_gphy_config_aneg,
++		.read_status	= genphy_read_status,
++		.ack_interrupt	= vr9_gphy_ack_interrupt,
++		.did_interrupt	= vr9_gphy_did_interrupt,
++		.config_intr	= vr9_gphy_config_intr,
++		.driver		= { .owner = THIS_MODULE },
++	}, {
++		.phy_id		= 0x030260D0,
++		.phy_id_mask	= 0xfffffff0,
++		.name		= "Lantiq XWAY VR9 GPHY 11G v1.3",
++		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
++		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
++		.config_init	= vr9_gphy_config_init,
++		.config_aneg	= vr9_gphy_config_aneg,
++		.read_status	= genphy_read_status,
++		.ack_interrupt	= vr9_gphy_ack_interrupt,
++		.did_interrupt	= vr9_gphy_did_interrupt,
++		.config_intr	= vr9_gphy_config_intr,
++		.driver		= { .owner = THIS_MODULE },
++	}, {
++		.phy_id		= 0xd565a408,
++		.phy_id_mask	= 0xfffffff8,
++		.name		= "Lantiq XWAY VR9 GPHY 11G v1.4",
++		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
++		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
++		.config_init	= vr9_gphy_config_init,
++		.config_aneg	= vr9_gphy_config_aneg,
++		.read_status	= genphy_read_status,
++		.ack_interrupt	= vr9_gphy_ack_interrupt,
++		.did_interrupt	= vr9_gphy_did_interrupt,
++		.config_intr	= vr9_gphy_config_intr,
++		.driver		= { .owner = THIS_MODULE },
++	}, {
++		.phy_id		= 0xd565a418,
++		.phy_id_mask	= 0xfffffff8,
++		.name		= "Lantiq XWAY XRX PHY22F v1.4",
++		.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
++		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
++		.config_init	= vr9_gphy_config_init,
++		.config_aneg	= vr9_gphy_config_aneg,
++		.read_status	= genphy_read_status,
++		.ack_interrupt	= vr9_gphy_ack_interrupt,
++		.did_interrupt	= vr9_gphy_did_interrupt,
++		.config_intr	= vr9_gphy_config_intr,
++		.driver		= { .owner = THIS_MODULE },
++	},
++};
++
++static int __init ltq_phy_init(void)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) {
++		int err = phy_driver_register(&lantiq_phy[i]);
++		if (err)
++			pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name);
++	}
++
++	return 0;
++}
++
++static void __exit ltq_phy_exit(void)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++)
++		phy_driver_unregister(&lantiq_phy[i]);
++}
++
++module_init(ltq_phy_init);
++module_exit(ltq_phy_exit);
++
++MODULE_DESCRIPTION("Lantiq PHY drivers");
++MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck at googlemail.com>");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt
+@@ -0,0 +1,216 @@
++Lanitq PHY binding
++============================================
++
++This devicetree binding controls the lantiq ethernet phys led functionality.
++
++Example:
++	mdio at 0 {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		compatible = "lantiq,xrx200-mdio";
++			phy5: ethernet-phy at 5 {
++			reg = <0x1>;
++			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
++		};
++		phy11: ethernet-phy at 11 {
++			reg = <0x11>;
++			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++			lantiq,led2h = <0x00>;
++			lantiq,led2l = <0x03>;
++		};
++		phy12: ethernet-phy at 12 {
++			reg = <0x12>;
++			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++			lantiq,led1h = <0x00>;
++			lantiq,led1l = <0x03>;
++		};
++		phy13: ethernet-phy at 13 {
++			reg = <0x13>;
++			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++			lantiq,led2h = <0x00>;
++			lantiq,led2l = <0x03>;
++		};
++		phy14: ethernet-phy at 14 {
++			reg = <0x14>;
++			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++			lantiq,led1h = <0x00>;
++			lantiq,led1l = <0x03>;
++		};
++	};
++
++Register Description
++============================================
++
++LEDCH:
++
++Name	Hardware Reset Value
++LEDCH	0x00C5
++
++| 15 |    |    |    |    |    |    |  8 |
++=========================================
++|		RES			|
++=========================================
++
++|  7 |    |    |    |    |    |    |  0 |
++=========================================
++|   FBF   |   SBF   |RES |     NACS     |
++=========================================
++
++Field	Bits	Type	Description
++FBC	7:6	RW	Fast Blink Frequency
++			---
++			0x0 (00b) F02HZ 2 Hz blinking frequency
++			0x1 (01b) F04HZ 4 Hz blinking frequency
++			0x2 (10b) F08HZ 8 Hz blinking frequency
++			0x3 (11b) F16HZ 16 Hz blinking frequency
++
++SBF	5:4	RW	Slow Blink Frequency
++			---
++			0x0 (00b) F02HZ 2 Hz blinking frequency
++			0x1 (01b) F04HZ 4 Hz blinking frequency
++			0x2 (10b) F08HZ 8 Hz blinking frequency
++			0x3 (11b) F16HZ 16 Hz blinking frequency
++
++NACS	2:0	RW	Inverse of Scan Function
++			---
++			0x0 (000b) NONE No Function
++			0x1 (001b) LINK Complex function enabled when link is up
++			0x2 (010b) PDOWN Complex function enabled when device is powered-down
++			0x3 (011b) EEE Complex function enabled when device is in EEE mode
++			0x4 (100b) ANEG Complex function enabled when auto-negotiation is running
++			0x5 (101b) ABIST Complex function enabled when analog self-test is running
++			0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running
++			0x7 (111b) TEST Complex function enabled when test mode is running
++
++LEDCL:
++
++Name	Hardware Reset Value
++LEDCL	0x0067
++
++| 15 |    |    |    |    |    |    |  8 |
++=========================================
++|		RES			|
++=========================================
++
++|  7 |    |    |    |    |    |    |  0 |
++=========================================
++|RES |     SCAN     |RES |    CBLINK    |
++=========================================
++
++Field	Bits	Type	Description
++SCAN	6:4	RW	Complex Scan Configuration
++			---
++			000 B NONE No Function
++			001 B LINK Complex function enabled when link is up
++			010 B PDOWN Complex function enabled when device is powered-down
++			011 B EEE Complex function enabled when device is in EEE mode
++			100 B ANEG Complex function enabled when auto-negotiation is running
++			101 B ABIST Complex function enabled when analog self-test is running
++			110 B CDIAG Complex function enabled when cable diagnostics are running
++			111 B TEST Complex function enabled when test mode is running
++
++CBLINK	2:0	RW	Complex Blinking Configuration
++			---
++			000 B NONE No Function
++			001 B LINK Complex function enabled when link is up
++			010 B PDOWN Complex function enabled when device is powered-down
++			011 B EEE Complex function enabled when device is in EEE mode
++			100 B ANEG Complex function enabled when auto-negotiation is running
++			101 B ABIST Complex function enabled when analog self-test is running
++			110 B CDIAG Complex function enabled when cable diagnostics are running
++			111 B TEST Complex function enabled when test mode is running
++
++LEDxH:
++
++Name	Hardware Reset Value
++LED0H	0x0070
++LED1H	0x0020
++LED2H	0x0040
++LED3H	0x0040
++
++| 15 |    |    |    |    |    |    |  8 |
++=========================================
++|		RES			|
++=========================================
++
++|  7 |    |    |    |    |    |    |  0 |
++=========================================
++|        CON        |       BLINKF      |
++=========================================
++
++Field	Bits	Type	Description
++CON	7:4	RW	Constant On Configuration
++			---
++			0x0 (0000b) NONE LED does not light up constantly
++			0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s
++			0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s
++			0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s
++			0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s
++			0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s
++			0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s
++			0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s
++			0x8 (1000b) PDOWN LED is on when device is powered-down
++			0x9 (1001b) EEE LED is on when device is in EEE mode
++			0xA (1010b) ANEG LED is on when auto-negotiation is running
++			0xB (1011b) ABIST LED is on when analog self-test is running
++			0xC (1100b) CDIAG LED is on when cable diagnostics are running
++
++BLINKF	3:0	RW	Fast Blinking Configuration
++			---
++			0x0 (0000b) NONE No Blinking
++			0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
++			0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
++			0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
++			0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
++			0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
++			0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
++			0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
++			0x8 (1000b) PDOWN Blink when device is powered-down
++			0x9 (1001b) EEE Blink when device is in EEE mode
++			0xA (1010b) ANEG Blink when auto-negotiation is running
++			0xB (1011b) ABIST Blink when analog self-test is running
++			0xC (1100b) CDIAG Blink when cable diagnostics are running
++
++LEDxL:
++
++Name	Hardware Reset Value
++LED0L	0x0003
++LED1L	0x0000
++LED2L	0x0000
++LED3L	0x0020
++
++| 15 |    |    |    |    |    |    |  8 |
++=========================================
++|		RES			|
++=========================================
++
++|  7 |    |    |    |    |    |    |  0 |
++=========================================
++|      BLINKS       |       PULSE       |
++=========================================
++
++Field	Bits	Type	Description
++BLINKS	7:4	RW	Slow Blinkin Configuration
++			---
++			0x0 (0000b) NONE No Blinking
++			0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
++			0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
++			0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
++			0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
++			0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
++			0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
++			0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
++			0x8 (1000b) PDOWN Blink when device is powered-down
++			0x9 (1001b) EEE Blink when device is in EEE mode
++			0xA (1010b) ANEG Blink when auto-negotiation is running
++			0xB (1011b) ABIST Blink when analog self-test is running
++			0xC (1100b) CDIAG Blink when cable diagnostics are runningning
++
++PULSE	3:0	RW	Pulsing Configuration
++			The pulse field is a mask field by which certain events can be combined
++			---
++			0x0 (0000b) NONE No pulsing
++			0x1 (0001b) TXACT Transmit activity
++			0x2 (0010b) RXACT Receive activity
++			0x4 (0100b) COL Collision
++			0x8 (1000b) RES Reserved
diff --git a/target/linux/lantiq/patches-4.4/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-4.4/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
new file mode 100644
index 0000000..b69b2a9
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
@@ -0,0 +1,364 @@
+From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 22 Oct 2012 09:26:24 +0200
+Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ firmware/Makefile       |    4 +
+ firmware/lantiq/COPYING |  286 +++++++++++++++++++++++++++++++++++++++++++++++
+ firmware/lantiq/README  |   45 ++++++++
+ 3 files changed, 335 insertions(+)
+ create mode 100644 firmware/lantiq/COPYING
+ create mode 100644 firmware/lantiq/README
+
+--- a/firmware/Makefile
++++ b/firmware/Makefile
+@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P
+ fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
+ fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
+ fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a1x.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a2x.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a1x.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a2x.bin
+ fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
+ 
+ fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
+--- /dev/null
++++ b/firmware/lantiq/COPYING
+@@ -0,0 +1,286 @@
++All firmware files are copyrighted by Lantiq Deutschland GmbH.
++The files have been extracted from header files found in Lantiq BSPs.
++If not stated otherwise all files are licensed under GPL.
++
++=======================================================================
++
++		    GNU GENERAL PUBLIC LICENSE
++		       Version 2, June 1991
++
++ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
++     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ Everyone is permitted to copy and distribute verbatim copies
++ of this license document, but changing it is not allowed.
++
++			    Preamble
++
++  The licenses for most software are designed to take away your
++freedom to share and change it.  By contrast, the GNU General Public
++License is intended to guarantee your freedom to share and change free
++software--to make sure the software is free for all its users.  This
++General Public License applies to most of the Free Software
++Foundation's software and to any other program whose authors commit to
++using it.  (Some other Free Software Foundation software is covered by
++the GNU Library General Public License instead.)  You can apply it to
++your programs, too.
++
++  When we speak of free software, we are referring to freedom, not
++price.  Our General Public Licenses are designed to make sure that you
++have the freedom to distribute copies of free software (and charge for
++this service if you wish), that you receive source code or can get it
++if you want it, that you can change the software or use pieces of it
++in new free programs; and that you know you can do these things.
++
++  To protect your rights, we need to make restrictions that forbid
++anyone to deny you these rights or to ask you to surrender the rights.
++These restrictions translate to certain responsibilities for you if you
++distribute copies of the software, or if you modify it.
++
++  For example, if you distribute copies of such a program, whether
++gratis or for a fee, you must give the recipients all the rights that
++you have.  You must make sure that they, too, receive or can get the
++source code.  And you must show them these terms so they know their
++rights.
++
++  We protect your rights with two steps: (1) copyright the software, and
++(2) offer you this license which gives you legal permission to copy,
++distribute and/or modify the software.
++
++  Also, for each author's protection and ours, we want to make certain
++that everyone understands that there is no warranty for this free
++software.  If the software is modified by someone else and passed on, we
++want its recipients to know that what they have is not the original, so
++that any problems introduced by others will not reflect on the original
++authors' reputations.
++
++  Finally, any free program is threatened constantly by software
++patents.  We wish to avoid the danger that redistributors of a free
++program will individually obtain patent licenses, in effect making the
++program proprietary.  To prevent this, we have made it clear that any
++patent must be licensed for everyone's free use or not licensed at all.
++
++  The precise terms and conditions for copying, distribution and
++modification follow.
++

++		    GNU GENERAL PUBLIC LICENSE
++   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
++
++  0. This License applies to any program or other work which contains
++a notice placed by the copyright holder saying it may be distributed
++under the terms of this General Public License.  The "Program", below,
++refers to any such program or work, and a "work based on the Program"
++means either the Program or any derivative work under copyright law:
++that is to say, a work containing the Program or a portion of it,
++either verbatim or with modifications and/or translated into another
++language.  (Hereinafter, translation is included without limitation in
++the term "modification".)  Each licensee is addressed as "you".
++
++Activities other than copying, distribution and modification are not
++covered by this License; they are outside its scope.  The act of
++running the Program is not restricted, and the output from the Program
++is covered only if its contents constitute a work based on the
++Program (independent of having been made by running the Program).
++Whether that is true depends on what the Program does.
++
++  1. You may copy and distribute verbatim copies of the Program's
++source code as you receive it, in any medium, provided that you
++conspicuously and appropriately publish on each copy an appropriate
++copyright notice and disclaimer of warranty; keep intact all the
++notices that refer to this License and to the absence of any warranty;
++and give any other recipients of the Program a copy of this License
++along with the Program.
++
++You may charge a fee for the physical act of transferring a copy, and
++you may at your option offer warranty protection in exchange for a fee.
++
++  2. You may modify your copy or copies of the Program or any portion
++of it, thus forming a work based on the Program, and copy and
++distribute such modifications or work under the terms of Section 1
++above, provided that you also meet all of these conditions:
++
++    a) You must cause the modified files to carry prominent notices
++    stating that you changed the files and the date of any change.
++
++    b) You must cause any work that you distribute or publish, that in
++    whole or in part contains or is derived from the Program or any
++    part thereof, to be licensed as a whole at no charge to all third
++    parties under the terms of this License.
++
++    c) If the modified program normally reads commands interactively
++    when run, you must cause it, when started running for such
++    interactive use in the most ordinary way, to print or display an
++    announcement including an appropriate copyright notice and a
++    notice that there is no warranty (or else, saying that you provide
++    a warranty) and that users may redistribute the program under
++    these conditions, and telling the user how to view a copy of this
++    License.  (Exception: if the Program itself is interactive but
++    does not normally print such an announcement, your work based on
++    the Program is not required to print an announcement.)
++

++These requirements apply to the modified work as a whole.  If
++identifiable sections of that work are not derived from the Program,
++and can be reasonably considered independent and separate works in
++themselves, then this License, and its terms, do not apply to those
++sections when you distribute them as separate works.  But when you
++distribute the same sections as part of a whole which is a work based
++on the Program, the distribution of the whole must be on the terms of
++this License, whose permissions for other licensees extend to the
++entire whole, and thus to each and every part regardless of who wrote it.
++
++Thus, it is not the intent of this section to claim rights or contest
++your rights to work written entirely by you; rather, the intent is to
++exercise the right to control the distribution of derivative or
++collective works based on the Program.
++
++In addition, mere aggregation of another work not based on the Program
++with the Program (or with a work based on the Program) on a volume of
++a storage or distribution medium does not bring the other work under
++the scope of this License.
++
++  3. You may copy and distribute the Program (or a work based on it,
++under Section 2) in object code or executable form under the terms of
++Sections 1 and 2 above provided that you also do one of the following:
++
++    a) Accompany it with the complete corresponding machine-readable
++    source code, which must be distributed under the terms of Sections
++    1 and 2 above on a medium customarily used for software interchange; or,
++
++    b) Accompany it with a written offer, valid for at least three
++    years, to give any third party, for a charge no more than your
++    cost of physically performing source distribution, a complete
++    machine-readable copy of the corresponding source code, to be
++    distributed under the terms of Sections 1 and 2 above on a medium
++    customarily used for software interchange; or,
++
++    c) Accompany it with the information you received as to the offer
++    to distribute corresponding source code.  (This alternative is
++    allowed only for noncommercial distribution and only if you
++    received the program in object code or executable form with such
++    an offer, in accord with Subsection b above.)
++
++The source code for a work means the preferred form of the work for
++making modifications to it.  For an executable work, complete source
++code means all the source code for all modules it contains, plus any
++associated interface definition files, plus the scripts used to
++control compilation and installation of the executable.  However, as a
++special exception, the source code distributed need not include
++anything that is normally distributed (in either source or binary
++form) with the major components (compiler, kernel, and so on) of the
++operating system on which the executable runs, unless that component
++itself accompanies the executable.
++
++If distribution of executable or object code is made by offering
++access to copy from a designated place, then offering equivalent
++access to copy the source code from the same place counts as
++distribution of the source code, even though third parties are not
++compelled to copy the source along with the object code.
++

++  4. You may not copy, modify, sublicense, or distribute the Program
++except as expressly provided under this License.  Any attempt
++otherwise to copy, modify, sublicense or distribute the Program is
++void, and will automatically terminate your rights under this License.
++However, parties who have received copies, or rights, from you under
++this License will not have their licenses terminated so long as such
++parties remain in full compliance.
++
++  5. You are not required to accept this License, since you have not
++signed it.  However, nothing else grants you permission to modify or
++distribute the Program or its derivative works.  These actions are
++prohibited by law if you do not accept this License.  Therefore, by
++modifying or distributing the Program (or any work based on the
++Program), you indicate your acceptance of this License to do so, and
++all its terms and conditions for copying, distributing or modifying
++the Program or works based on it.
++
++  6. Each time you redistribute the Program (or any work based on the
++Program), the recipient automatically receives a license from the
++original licensor to copy, distribute or modify the Program subject to
++these terms and conditions.  You may not impose any further
++restrictions on the recipients' exercise of the rights granted herein.
++You are not responsible for enforcing compliance by third parties to
++this License.
++
++  7. If, as a consequence of a court judgment or allegation of patent
++infringement or for any other reason (not limited to patent issues),
++conditions are imposed on you (whether by court order, agreement or
++otherwise) that contradict the conditions of this License, they do not
++excuse you from the conditions of this License.  If you cannot
++distribute so as to satisfy simultaneously your obligations under this
++License and any other pertinent obligations, then as a consequence you
++may not distribute the Program at all.  For example, if a patent
++license would not permit royalty-free redistribution of the Program by
++all those who receive copies directly or indirectly through you, then
++the only way you could satisfy both it and this License would be to
++refrain entirely from distribution of the Program.
++
++If any portion of this section is held invalid or unenforceable under
++any particular circumstance, the balance of the section is intended to
++apply and the section as a whole is intended to apply in other
++circumstances.
++
++It is not the purpose of this section to induce you to infringe any
++patents or other property right claims or to contest validity of any
++such claims; this section has the sole purpose of protecting the
++integrity of the free software distribution system, which is
++implemented by public license practices.  Many people have made
++generous contributions to the wide range of software distributed
++through that system in reliance on consistent application of that
++system; it is up to the author/donor to decide if he or she is willing
++to distribute software through any other system and a licensee cannot
++impose that choice.
++
++This section is intended to make thoroughly clear what is believed to
++be a consequence of the rest of this License.
++

++  8. If the distribution and/or use of the Program is restricted in
++certain countries either by patents or by copyrighted interfaces, the
++original copyright holder who places the Program under this License
++may add an explicit geographical distribution limitation excluding
++those countries, so that distribution is permitted only in or among
++countries not thus excluded.  In such case, this License incorporates
++the limitation as if written in the body of this License.
++
++  9. The Free Software Foundation may publish revised and/or new versions
++of the General Public License from time to time.  Such new versions will
++be similar in spirit to the present version, but may differ in detail to
++address new problems or concerns.
++
++Each version is given a distinguishing version number.  If the Program
++specifies a version number of this License which applies to it and "any
++later version", you have the option of following the terms and conditions
++either of that version or of any later version published by the Free
++Software Foundation.  If the Program does not specify a version number of
++this License, you may choose any version ever published by the Free Software
++Foundation.
++
++  10. If you wish to incorporate parts of the Program into other free
++programs whose distribution conditions are different, write to the author
++to ask for permission.  For software which is copyrighted by the Free
++Software Foundation, write to the Free Software Foundation; we sometimes
++make exceptions for this.  Our decision will be guided by the two goals
++of preserving the free status of all derivatives of our free software and
++of promoting the sharing and reuse of software generally.
++
++			    NO WARRANTY
++
++  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
++FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
++OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
++PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
++OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
++TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
++PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
++REPAIR OR CORRECTION.
++
++  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
++WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
++REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
++INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
++OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
++TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
++YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
++PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
++POSSIBILITY OF SUCH DAMAGES.
++
++		     END OF TERMS AND CONDITIONS
+--- /dev/null
++++ b/firmware/lantiq/README
+@@ -0,0 +1,45 @@
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++# (C) Copyright 2007 - 2012
++# Lantiq Deutschland GmbH
++#
++# (C) Copyright 2012
++# Daniel Schwierzeck <daniel.schwierzeck at googlemail.com>
++#
++
++#
++# How to use
++#
++Configure kernel with:
++CONFIG_FW_LOADER=y
++CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR"
++CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES"
++
++where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list
++of space separated files from list below.
++
++#
++# Firmware files
++#
++
++# GPHY core on Lantiq XWAY VR9 v1.1
++lantiq/vr9_phy11g_a1x.bin
++lantiq/vr9_phy22f_a1x.bin
++
++# GPHY core on Lantiq XWAY VR9 v1.2
++lantiq/vr9_phy11g_a2x.bin
++lantiq/vr9_phy22f_a2x.bin
diff --git a/target/linux/lantiq/patches-4.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-4.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
new file mode 100644
index 0000000..3250a9b
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
@@ -0,0 +1,3344 @@
+From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 22 Oct 2012 12:22:23 +0200
+Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+
+---
+ drivers/net/ethernet/Kconfig            |    8 +-
+ drivers/net/ethernet/Makefile           |    1 +
+ drivers/net/ethernet/lantiq_pce.h       |  163 +++
+ drivers/net/ethernet/lantiq_xrx200.c    | 1798 +++++++++++++++++++++++++++++++
+ drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++
+ 5 files changed, 3297 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/net/ethernet/lantiq_pce.h
+ create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
+ create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h
+
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -103,7 +103,13 @@ config LANTIQ_ETOP
+ 	tristate "Lantiq SoC ETOP driver"
+ 	depends on SOC_TYPE_XWAY
+ 	---help---
+-	  Support for the MII0 inside the Lantiq SoC
++	  Support for the MII0 inside the Lantiq ADSL SoC
++
++config LANTIQ_XRX200
++	tristate "Lantiq SoC XRX200 driver"
++	depends on SOC_TYPE_XWAY
++	---help---
++	  Support for the MII0 inside the Lantiq VDSL SoC
+ 
+ source "drivers/net/ethernet/marvell/Kconfig"
+ source "drivers/net/ethernet/mellanox/Kconfig"
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal
+ obj-$(CONFIG_JME) += jme.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
++obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
+ obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
+ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
+ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
+--- /dev/null
++++ b/drivers/net/ethernet/lantiq_pce.h
+@@ -0,0 +1,163 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify it
++ *   under the terms of the GNU General Public License version 2 as published
++ *   by the Free Software Foundation.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Lantiq Deutschland GmbH
++ *   Copyright (C) 2012 John Crispin <blogic at openwrt.org>
++ *
++ *   PCE microcode extracted from UGW5.2 switch api
++ */
++
++/* Switch API Micro Code V0.3 */
++enum {
++	OUT_MAC0 = 0,
++	OUT_MAC1,
++	OUT_MAC2,
++	OUT_MAC3,
++	OUT_MAC4,
++	OUT_MAC5,
++	OUT_ETHTYP,
++	OUT_VTAG0,
++	OUT_VTAG1,
++	OUT_ITAG0,
++	OUT_ITAG1,	/*10 */
++	OUT_ITAG2,
++	OUT_ITAG3,
++	OUT_IP0,
++	OUT_IP1,
++	OUT_IP2,
++	OUT_IP3,
++	OUT_SIP0,
++	OUT_SIP1,
++	OUT_SIP2,
++	OUT_SIP3,	/*20*/
++	OUT_SIP4,
++	OUT_SIP5,
++	OUT_SIP6,
++	OUT_SIP7,
++	OUT_DIP0,
++	OUT_DIP1,
++	OUT_DIP2,
++	OUT_DIP3,
++	OUT_DIP4,
++	OUT_DIP5,	/*30*/
++	OUT_DIP6,
++	OUT_DIP7,
++	OUT_SESID,
++	OUT_PROT,
++	OUT_APP0,
++	OUT_APP1,
++	OUT_IGMP0,
++	OUT_IGMP1,
++	OUT_IPOFF,	/*39*/
++	OUT_NONE =  63
++};
++
++/* parser's microcode length type */
++#define INSTR		0
++#define IPV6		1
++#define LENACCU		2
++
++/* parser's microcode flag type */
++enum {
++	FLAG_ITAG =  0,
++	FLAG_VLAN,
++	FLAG_SNAP,
++	FLAG_PPPOE,
++	FLAG_IPV6,
++	FLAG_IPV6FL,
++	FLAG_IPV4,
++	FLAG_IGMP,
++	FLAG_TU,
++	FLAG_HOP,
++	FLAG_NN1,	/*10 */
++	FLAG_NN2,
++	FLAG_END,
++	FLAG_NO,	/*13*/
++};
++
++/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
++#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
++	{ {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
++struct pce_microcode {
++	unsigned short val[4];
++/*	unsigned short val_2;
++	unsigned short val_1;
++	unsigned short val_0;*/
++} pce_microcode[] = {
++	/*      value    mask    ns  fields      L  type     flags       ipv4_len */
++	MC_ENTRY(0x88c3, 0xFFFF,  1, OUT_ITAG0,  4, INSTR,   FLAG_ITAG,  0),
++	MC_ENTRY(0x8100, 0xFFFF,  2, OUT_VTAG0,  2, INSTR,   FLAG_VLAN,  0),
++	MC_ENTRY(0x88A8, 0xFFFF,  1, OUT_VTAG0,  2, INSTR,   FLAG_VLAN,  0),
++	MC_ENTRY(0x8100, 0xFFFF,  1, OUT_VTAG0,  2, INSTR,   FLAG_VLAN,  0),
++	MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE,   0, INSTR,   FLAG_SNAP,  0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7,   3, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7,   3, INSTR,   FLAG_PPPOE, 0),
++	MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0,    4, INSTR,   FLAG_IPV4,  1),
++	MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0,    3, INSTR,   FLAG_IPV6,  0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3,    2, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0,   4, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE,   0, LENACCU, FLAG_NO,    0),
++	MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT,   1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT,   1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3,   17, INSTR,   FLAG_HOP,   0),
++	MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3,   17, INSTR,   FLAG_NN1,   0),
++	MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3,   17, INSTR,   FLAG_NN2,   0),
++	MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT,   1, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE,   0, IPV6,    FLAG_HOP,   0),
++	MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE,   0, IPV6,    FLAG_NN1,   0),
++	MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE,   0, IPV6,    FLAG_NN2,   0),
++	MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT,   1, IPV6,    FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0,  16, INSTR,   FLAG_NO,    0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0,   4, INSTR,   FLAG_IGMP,  0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
++};
+--- /dev/null
++++ b/drivers/net/ethernet/lantiq_xrx200.c
+@@ -0,0 +1,1801 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify it
++ *   under the terms of the GNU General Public License version 2 as published
++ *   by the Free Software Foundation.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Lantiq Deutschland
++ *   Copyright (C) 2012 John Crispin <blogic at openwrt.org>
++ */
++
++#include <linux/switch.h>
++#include <linux/etherdevice.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <asm/delay.h>
++
++#include <linux/of_net.h>
++#include <linux/of_mdio.h>
++#include <linux/of_gpio.h>
++
++#include <xway_dma.h>
++#include <lantiq_soc.h>
++
++#include "lantiq_pce.h"
++#include "lantiq_xrx200_sw.h"
++
++#define SW_POLLING
++#define SW_ROUTING
++/* #define SW_PORTMAP */
++
++#ifdef SW_ROUTING
++  #ifdef SW_PORTMAP
++#define XRX200_MAX_DEV		2
++  #else
++#define XRX200_MAX_DEV		2
++  #endif
++#else
++#define XRX200_MAX_DEV		1
++#endif
++
++#define XRX200_MAX_VLAN		64
++#define XRX200_PCE_ACTVLAN_IDX	0x01
++#define XRX200_PCE_VLANMAP_IDX	0x02
++
++#define XRX200_MAX_PORT		7
++#define XRX200_MAX_DMA		8
++
++#define XRX200_HEADROOM		4
++
++#define XRX200_TX_TIMEOUT	(10 * HZ)
++
++/* port type */
++#define XRX200_PORT_TYPE_PHY	1
++#define XRX200_PORT_TYPE_MAC	2
++
++/* DMA */
++#define XRX200_DMA_DATA_LEN	0x600
++#define XRX200_DMA_IRQ		INT_NUM_IM2_IRL0
++#define XRX200_DMA_RX		0
++#define XRX200_DMA_TX		1
++#define XRX200_DMA_IS_TX(x)	(x%2)
++#define XRX200_DMA_IS_RX(x)	(!XRX200_DMA_IS_TX(x))
++
++/* fetch / store dma */
++#define FDMA_PCTRL0		0x2A00
++#define FDMA_PCTRLx(x)		(FDMA_PCTRL0 + (x * 0x18))
++#define SDMA_PCTRL0		0x2F00
++#define SDMA_PCTRLx(x)		(SDMA_PCTRL0 + (x * 0x18))
++
++/* buffer management */
++#define BM_PCFG0		0x200
++#define BM_PCFGx(x)		(BM_PCFG0 + (x * 8))
++
++/* MDIO */
++#define MDIO_GLOB		0x0000
++#define MDIO_CTRL		0x0020
++#define MDIO_READ		0x0024
++#define MDIO_WRITE		0x0028
++#define MDIO_PHY0		0x0054
++#define MDIO_PHY(x)		(0x0054 - (x * sizeof(unsigned)))
++#define MDIO_CLK_CFG0		0x002C
++#define MDIO_CLK_CFG1		0x0030
++
++#define MDIO_GLOB_ENABLE	0x8000
++#define MDIO_BUSY		BIT(12)
++#define MDIO_RD			BIT(11)
++#define MDIO_WR			BIT(10)
++#define MDIO_MASK		0x1f
++#define MDIO_ADDRSHIFT		5
++#define MDIO1_25MHZ		9
++
++#define MDIO_PHY_LINK_DOWN	0x4000
++#define MDIO_PHY_LINK_UP	0x2000
++
++#define MDIO_PHY_SPEED_M10	0x0000
++#define MDIO_PHY_SPEED_M100	0x0800
++#define MDIO_PHY_SPEED_G1	0x1000
++
++#define MDIO_PHY_FDUP_EN	0x0200
++#define MDIO_PHY_FDUP_DIS	0x0600
++
++#define MDIO_PHY_LINK_MASK	0x6000
++#define MDIO_PHY_SPEED_MASK	0x1800
++#define MDIO_PHY_FDUP_MASK	0x0600
++#define MDIO_PHY_ADDR_MASK	0x001f
++#define MDIO_UPDATE_MASK	MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
++					MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
++
++/* MII */
++#define MII_CFG(p)		(p * 8)
++
++#define MII_CFG_EN		BIT(14)
++
++#define MII_CFG_MODE_MIIP	0x0
++#define MII_CFG_MODE_MIIM	0x1
++#define MII_CFG_MODE_RMIIP	0x2
++#define MII_CFG_MODE_RMIIM	0x3
++#define MII_CFG_MODE_RGMII	0x4
++#define MII_CFG_MODE_MASK	0xf
++
++#define MII_CFG_RATE_M2P5	0x00
++#define MII_CFG_RATE_M25	0x10
++#define MII_CFG_RATE_M125	0x20
++#define MII_CFG_RATE_M50	0x30
++#define MII_CFG_RATE_AUTO	0x40
++#define MII_CFG_RATE_MASK	0x70
++
++/* cpu port mac */
++#define PMAC_HD_CTL		0x0000
++#define PMAC_RX_IPG		0x0024
++#define PMAC_EWAN		0x002c
++
++#define PMAC_IPG_MASK		0xf
++#define PMAC_HD_CTL_AS		0x0008
++#define PMAC_HD_CTL_AC		0x0004
++#define PMAC_HD_CTL_RC		0x0010
++#define PMAC_HD_CTL_RXSH	0x0040
++#define PMAC_HD_CTL_AST		0x0080
++#define PMAC_HD_CTL_RST		0x0100
++
++/* PCE */
++#define PCE_TBL_KEY(x)		(0x1100 + ((7 - x) * 4))
++#define PCE_TBL_MASK		0x1120
++#define PCE_TBL_VAL(x)		(0x1124 + ((4 - x) * 4))
++#define PCE_TBL_ADDR		0x1138
++#define PCE_TBL_CTRL		0x113c
++#define PCE_PMAP1		0x114c
++#define PCE_PMAP2		0x1150
++#define PCE_PMAP3		0x1154
++#define PCE_GCTRL_REG(x)	(0x1158 + (x * 4))
++#define PCE_PCTRL_REG(p, x)	(0x1200 + (((p * 0xa) + x) * 4))
++
++#define PCE_TBL_BUSY		BIT(15)
++#define PCE_TBL_CFG_ADDR_MASK	0x1f
++#define PCE_TBL_CFG_ADWR	0x20
++#define PCE_TBL_CFG_ADWR_MASK	0x60
++#define PCE_INGRESS		BIT(11)
++
++/* MAC */
++#define MAC_FLEN_REG		(0x2314)
++#define MAC_CTRL_REG(p, x)	(0x240c + (((p * 0xc) + x) * 4))
++
++/* buffer management */
++#define BM_PCFG(p)		(0x200 + (p * 8))
++
++/* special tag in TX path header */
++#define SPID_SHIFT		24
++#define DPID_SHIFT		16
++#define DPID_ENABLE		1
++#define SPID_CPU_PORT		2
++#define PORT_MAP_SEL		BIT(15)
++#define PORT_MAP_EN		BIT(14)
++#define PORT_MAP_SHIFT		1
++#define PORT_MAP_MASK		0x3f
++
++#define SPPID_MASK		0x7
++#define SPPID_SHIFT		4
++
++/* MII regs not yet in linux */
++#define MDIO_DEVAD_NONE		(-1)
++#define ADVERTIZE_MPD		(1 << 10)
++
++struct xrx200_port {
++	u8 num;
++	u8 phy_addr;
++	u16 flags;
++	phy_interface_t phy_if;
++
++	int link;
++	int gpio;
++	enum of_gpio_flags gpio_flags;
++
++	struct phy_device *phydev;
++	struct device_node *phy_node;
++};
++
++struct xrx200_chan {
++	int idx;
++	int refcount;
++	int tx_free;
++
++	struct net_device dummy_dev;
++	struct net_device *devs[XRX200_MAX_DEV];
++
++	struct tasklet_struct tasklet;
++	struct napi_struct napi;
++	struct ltq_dma_channel dma;
++	struct sk_buff *skb[LTQ_DESC_NUM];
++};
++
++struct xrx200_hw {
++	struct clk *clk;
++	struct mii_bus *mii_bus;
++
++	struct xrx200_chan chan[XRX200_MAX_DMA];
++
++	struct net_device *devs[XRX200_MAX_DEV];
++	int num_devs;
++
++	int port_map[XRX200_MAX_PORT];
++	unsigned short wan_map;
++
++	spinlock_t lock;
++
++	struct switch_dev swdev;
++};
++
++struct xrx200_priv {
++	struct net_device_stats stats;
++	int id;
++
++	struct xrx200_port port[XRX200_MAX_PORT];
++	int num_port;
++	bool wan;
++	bool sw;
++	unsigned short port_map;
++	unsigned char mac[6];
++
++	struct xrx200_hw *hw;
++};
++
++static __iomem void *xrx200_switch_membase;
++static __iomem void *xrx200_mii_membase;
++static __iomem void *xrx200_mdio_membase;
++static __iomem void *xrx200_pmac_membase;
++
++#define ltq_switch_r32(x)	ltq_r32(xrx200_switch_membase + (x))
++#define ltq_switch_w32(x, y)	ltq_w32(x, xrx200_switch_membase + (y))
++#define ltq_switch_w32_mask(x, y, z) \
++			ltq_w32_mask(x, y, xrx200_switch_membase + (z))
++
++#define ltq_mdio_r32(x)		ltq_r32(xrx200_mdio_membase + (x))
++#define ltq_mdio_w32(x, y)	ltq_w32(x, xrx200_mdio_membase + (y))
++#define ltq_mdio_w32_mask(x, y, z) \
++			ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
++
++#define ltq_mii_r32(x)		ltq_r32(xrx200_mii_membase + (x))
++#define ltq_mii_w32(x, y)	ltq_w32(x, xrx200_mii_membase + (y))
++#define ltq_mii_w32_mask(x, y, z) \
++			ltq_w32_mask(x, y, xrx200_mii_membase + (z))
++
++#define ltq_pmac_r32(x)		ltq_r32(xrx200_pmac_membase + (x))
++#define ltq_pmac_w32(x, y)	ltq_w32(x, xrx200_pmac_membase + (y))
++#define ltq_pmac_w32_mask(x, y, z) \
++			ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
++
++#define XRX200_GLOBAL_REGATTR(reg) \
++	.id = reg, \
++	.type = SWITCH_TYPE_INT, \
++	.set = xrx200_set_global_attr, \
++	.get = xrx200_get_global_attr
++
++#define XRX200_PORT_REGATTR(reg) \
++	.id = reg, \
++	.type = SWITCH_TYPE_INT, \
++	.set = xrx200_set_port_attr, \
++	.get = xrx200_get_port_attr
++
++static int xrx200sw_read_x(int reg, int x)
++{
++	int value, mask, addr;
++
++	addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
++	value = ltq_switch_r32(addr);
++	mask = (1 << xrx200sw_reg[reg].size) - 1;
++	value = (value >> xrx200sw_reg[reg].shift);
++
++	return (value & mask);
++}
++
++static int xrx200sw_read(int reg)
++{
++	return xrx200sw_read_x(reg, 0);
++}
++
++static void xrx200sw_write_x(int value, int reg, int x)
++{
++	int mask, addr;
++
++	addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
++	mask = (1 << xrx200sw_reg[reg].size) - 1;
++	mask = (mask << xrx200sw_reg[reg].shift);
++	value = (value << xrx200sw_reg[reg].shift) & mask;
++
++	ltq_switch_w32_mask(mask, value, addr);
++}
++
++static void xrx200sw_write(int value, int reg)
++{
++	xrx200sw_write_x(value, reg, 0);
++}
++
++struct xrx200_pce_table_entry {
++	int index;	// PCE_TBL_ADDR.ADDR = pData->table_index
++	int table; 	// PCE_TBL_CTRL.ADDR = pData->table
++	unsigned short key[8];
++	unsigned short val[5];
++	unsigned short mask;
++	unsigned short type;
++	unsigned short valid;
++	unsigned short gmap;
++};
++
++static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl)
++{
++	// wait until hardware is ready
++	while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
++
++	// prepare the table access:
++	// PCE_TBL_ADDR.ADDR = pData->table_index
++	xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
++	// PCE_TBL_CTRL.ADDR = pData->table
++	xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
++
++	//(address-based read)
++	xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
++
++	xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
++
++	// wait until hardware is ready
++	while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
++
++	// read the keys
++	tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7);
++	tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6);
++	tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5);
++	tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4);
++	tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3);
++	tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2);
++	tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1);
++	tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0);
++
++	// read the values
++	tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4);
++	tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3);
++	tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2);
++	tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1);
++	tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0);
++
++	// read the mask
++	tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0);
++	// read the type
++	tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE);
++	// read the valid flag
++	tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD);
++	// read the group map
++	tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP);
++
++	return 0;
++}
++
++static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl)
++{
++	// wait until hardware is ready
++	while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
++
++	// prepare the table access:
++	// PCE_TBL_ADDR.ADDR = pData->table_index
++	xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
++	// PCE_TBL_CTRL.ADDR = pData->table
++	xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
++
++	//(address-based write)
++	xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
++
++	// read the keys
++	xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7);
++	xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6);
++	xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5);
++	xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4);
++	xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3);
++	xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2);
++	xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1);
++	xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0);
++
++	// read the values
++	xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4);
++	xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3);
++	xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2);
++	xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1);
++	xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0);
++
++	// read the mask
++	xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0);
++	// read the type
++	xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE);
++	// read the valid flag
++	xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD);
++	// read the group map
++	xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP);
++
++	xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
++
++	// wait until hardware is ready
++	while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
++
++	return 0;
++}
++
++static void xrx200sw_fixup_pvids(void)
++{
++	int index, p, portmap, untagged;
++	struct xrx200_pce_table_entry tem;
++	struct xrx200_pce_table_entry tev;
++
++	portmap = 0;
++	for (p = 0; p < XRX200_MAX_PORT; p++)
++		portmap |= BIT(p);
++
++	tem.table = XRX200_PCE_VLANMAP_IDX;
++	tev.table = XRX200_PCE_ACTVLAN_IDX;
++
++	for (index = XRX200_MAX_VLAN; index-- > 0;)
++	{
++		tev.index = index;
++		xrx200_pce_table_entry_read(&tev);
++
++		if (tev.valid == 0)
++			continue;
++
++		tem.index = index;
++		xrx200_pce_table_entry_read(&tem);
++
++		if (tem.val[0] == 0)
++			continue;
++
++		untagged = portmap & (tem.val[1] ^ tem.val[2]);
++
++		for (p = 0; p < XRX200_MAX_PORT; p++)
++			if (untagged & BIT(p))
++			{
++				portmap &= ~BIT(p);
++				xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
++			}
++
++		for (p = 0; p < XRX200_MAX_PORT; p++)
++			if (portmap & BIT(p))
++				xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
++	}
++}
++
++// swconfig interface
++static void xrx200_hw_init(struct xrx200_hw *hw);
++
++// global
++static int xrx200sw_reset_switch(struct switch_dev *dev)
++{
++	struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
++
++	xrx200_hw_init(hw);
++
++	return 0;
++}
++
++static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++	int p;
++
++	if ((attr->max > 0) && (val->value.i > attr->max))
++		return -EINVAL;
++
++	for (p = 0; p < XRX200_MAX_PORT; p++) {
++		xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p);
++		xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p);
++	}
++
++	xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN);
++	return 0;
++}
++
++static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++	val->value.i = xrx200sw_read(attr->id);
++	return 0;
++}
++
++static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++	if ((attr->max > 0) && (val->value.i > attr->max))
++		return -EINVAL;
++
++	xrx200sw_write(val->value.i, attr->id);
++	return 0;
++}
++
++static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++	val->value.i = xrx200sw_read(attr->id);
++	return 0;
++}
++
++// vlan
++static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
++				 struct switch_val *val)
++{
++	int i;
++	struct xrx200_pce_table_entry tev;
++	struct xrx200_pce_table_entry tem;
++
++	tev.table = XRX200_PCE_ACTVLAN_IDX;
++
++	for (i = 0; i < XRX200_MAX_VLAN; i++)
++	{
++		tev.index = i;
++		xrx200_pce_table_entry_read(&tev);
++		if (tev.key[0] == val->value.i && i != val->port_vlan)
++			return -EINVAL;
++	}
++
++	tev.index = val->port_vlan;
++	xrx200_pce_table_entry_read(&tev);
++	tev.key[0] = val->value.i;
++	tev.valid = val->value.i > 0;
++	xrx200_pce_table_entry_write(&tev);
++
++	tem.table = XRX200_PCE_VLANMAP_IDX;
++	tem.index = val->port_vlan;
++	xrx200_pce_table_entry_read(&tem);
++	tem.val[0] = val->value.i;
++	xrx200_pce_table_entry_write(&tem);
++
++	xrx200sw_fixup_pvids();
++	return 0;
++}
++
++static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
++				 struct switch_val *val)
++{
++	struct xrx200_pce_table_entry te;
++
++	te.table = XRX200_PCE_ACTVLAN_IDX;
++	te.index = val->port_vlan;
++	xrx200_pce_table_entry_read(&te);
++	val->value.i = te.key[0];
++
++	return 0;
++}
++
++static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	int i, portmap, tagmap, untagged;
++	struct xrx200_pce_table_entry tem;
++
++	portmap = 0;
++	tagmap = 0;
++	for (i = 0; i < val->len; i++)
++	{
++		struct switch_port *p = &val->value.ports[i];
++
++		portmap |= (1 << p->id);
++		if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
++			tagmap |= (1 << p->id);
++	}
++
++	tem.table = XRX200_PCE_VLANMAP_IDX;
++
++	untagged = portmap ^ tagmap;
++	for (i = 0; i < XRX200_MAX_VLAN; i++)
++	{
++		tem.index = i;
++		xrx200_pce_table_entry_read(&tem);
++
++		if (tem.val[0] == 0)
++			continue;
++
++		if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i))
++			return -EINVAL;
++	}
++
++	tem.index = val->port_vlan;
++	xrx200_pce_table_entry_read(&tem);
++
++	// auto-enable this vlan if not enabled already
++	if (tem.val[0] == 0)
++	{
++		struct switch_val v;
++		v.port_vlan = val->port_vlan;
++		v.value.i = val->port_vlan;
++		if(xrx200sw_set_vlan_vid(dev, NULL, &v))
++			return -EINVAL;
++
++		//read updated tem
++		tem.index = val->port_vlan;
++		xrx200_pce_table_entry_read(&tem);
++	}
++
++	tem.val[1] = portmap;
++	tem.val[2] = tagmap;
++	xrx200_pce_table_entry_write(&tem);
++
++	xrx200sw_fixup_pvids();
++
++	return 0;
++}
++
++static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	int i;
++	unsigned short ports, tags;
++	struct xrx200_pce_table_entry tem;
++
++	tem.table = XRX200_PCE_VLANMAP_IDX;
++	tem.index = val->port_vlan;
++	xrx200_pce_table_entry_read(&tem);
++
++	ports = tem.val[1];
++	tags = tem.val[2];
++
++	for (i = 0; i < XRX200_MAX_PORT; i++) {
++		struct switch_port *p;
++
++		if (!(ports & (1 << i)))
++			continue;
++
++		p = &val->value.ports[val->len++];
++		p->id = i;
++		if (tags & (1 << i))
++			p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
++		else
++			p->flags = 0;
++	}
++
++	return 0;
++}
++
++static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
++				 struct switch_val *val)
++{
++	struct xrx200_pce_table_entry tev;
++
++	tev.table = XRX200_PCE_ACTVLAN_IDX;
++	tev.index = val->port_vlan;
++	xrx200_pce_table_entry_read(&tev);
++
++	if (tev.key[0] == 0)
++		return -EINVAL;
++
++	tev.valid = val->value.i;
++	xrx200_pce_table_entry_write(&tev);
++
++	xrx200sw_fixup_pvids();
++	return 0;
++}
++
++static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
++				 struct switch_val *val)
++{
++	struct xrx200_pce_table_entry tev;
++
++	tev.table = XRX200_PCE_ACTVLAN_IDX;
++	tev.index = val->port_vlan;
++	xrx200_pce_table_entry_read(&tev);
++	val->value.i = tev.valid;
++
++	return 0;
++}
++
++// port
++static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
++{
++	struct xrx200_pce_table_entry tev;
++
++	if (port >= XRX200_MAX_PORT)
++		return -EINVAL;
++
++	tev.table = XRX200_PCE_ACTVLAN_IDX;
++	tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port);
++	xrx200_pce_table_entry_read(&tev);
++
++	*val = tev.key[0];
++	return 0;
++}
++
++static int xrx200sw_get_port_link(struct switch_dev *dev,
++				  int port,
++				  struct switch_port_link *link)
++{
++	if (port >= XRX200_MAX_PORT)
++		return -EINVAL;
++
++	link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port);
++	if (!link->link)
++		return 0;
++
++	link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port);
++
++	link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010);
++	link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020);
++	link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port));
++
++	link->speed = SWITCH_PORT_SPEED_10;
++	if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port))
++		link->speed = SWITCH_PORT_SPEED_100;
++	if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port))
++		link->speed = SWITCH_PORT_SPEED_1000;
++
++	return 0;
++}
++
++static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++	if (val->port_vlan >= XRX200_MAX_PORT)
++		return -EINVAL;
++
++	if ((attr->max > 0) && (val->value.i > attr->max))
++		return -EINVAL;
++
++	xrx200sw_write_x(val->value.i, attr->id, val->port_vlan);
++	return 0;
++}
++
++static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
++{
++	if (val->port_vlan >= XRX200_MAX_PORT)
++		return -EINVAL;
++
++	val->value.i = xrx200sw_read_x(attr->id, val->port_vlan);
++	return 0;
++}
++
++// attributes
++static struct switch_attr xrx200sw_globals[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.set = xrx200_set_vlan_mode_enable,
++		.get = xrx200_get_vlan_mode_enable,
++		.name = "enable_vlan",
++		.description = "Enable VLAN mode",
++		.max = 1},
++};
++
++static struct switch_attr xrx200sw_port[] = {
++	{
++	XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR),
++	.name = "uvr",
++	.description = "Unknown VLAN Rule",
++	.max = 1,
++	},
++	{
++	XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR),
++	.name = "vsr",
++	.description = "VLAN Security Rule",
++	.max = 1,
++	},
++	{
++	XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR),
++	.name = "vinr",
++	.description = "VLAN Ingress Tag Rule",
++	.max = 2,
++	},
++	{
++	XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM),
++	.name = "tvm",
++	.description = "Transparent VLAN Mode",
++	.max = 1,
++	},
++};
++
++static struct switch_attr xrx200sw_vlan[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "vid",
++		.description = "VLAN ID (0-4094)",
++		.set = xrx200sw_set_vlan_vid,
++		.get = xrx200sw_get_vlan_vid,
++		.max = 4094,
++	},
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "enable",
++		.description = "Enable VLAN",
++		.set = xrx200sw_set_vlan_enable,
++		.get = xrx200sw_get_vlan_enable,
++		.max = 1,
++	},
++};
++
++static const struct switch_dev_ops xrx200sw_ops = {
++	.attr_global = {
++		.attr = xrx200sw_globals,
++		.n_attr = ARRAY_SIZE(xrx200sw_globals),
++	},
++	.attr_port = {
++		.attr = xrx200sw_port,
++		.n_attr = ARRAY_SIZE(xrx200sw_port),
++	},
++	.attr_vlan = {
++		.attr = xrx200sw_vlan,
++		.n_attr = ARRAY_SIZE(xrx200sw_vlan),
++	},
++	.get_vlan_ports = xrx200sw_get_vlan_ports,
++	.set_vlan_ports = xrx200sw_set_vlan_ports,
++	.get_port_pvid = xrx200sw_get_port_pvid,
++	.reset_switch = xrx200sw_reset_switch,
++	.get_port_link = xrx200sw_get_port_link,
++//	.get_port_stats = xrx200sw_get_port_stats, //TODO
++};
++
++static int xrx200sw_init(struct xrx200_hw *hw)
++{
++	int netdev_num;
++
++	for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++)
++	{
++		struct switch_dev *swdev;
++		struct net_device *dev = hw->devs[netdev_num];
++		struct xrx200_priv *priv = netdev_priv(dev);
++		if (!priv->sw)
++			continue;
++
++		swdev = &hw->swdev;
++
++		swdev->name = "Lantiq XRX200 Switch";
++		swdev->vlans = XRX200_MAX_VLAN;
++		swdev->ports = XRX200_MAX_PORT;
++		swdev->cpu_port = 6;
++		swdev->ops = &xrx200sw_ops;
++
++		register_switch(swdev, dev);
++		return 0; // enough switches
++	}
++	return 0;
++}
++
++static int xrx200_open(struct net_device *dev)
++{
++	struct xrx200_priv *priv = netdev_priv(dev);
++	int i;
++
++	for (i = 0; i < XRX200_MAX_DMA; i++) {
++		if (!priv->hw->chan[i].dma.irq)
++			continue;
++		spin_lock_bh(&priv->hw->lock);
++		if (!priv->hw->chan[i].refcount) {
++			if (XRX200_DMA_IS_RX(i))
++				napi_enable(&priv->hw->chan[i].napi);
++			ltq_dma_open(&priv->hw->chan[i].dma);
++		}
++		priv->hw->chan[i].refcount++;
++		spin_unlock_bh(&priv->hw->lock);
++	}
++	for (i = 0; i < priv->num_port; i++)
++		if (priv->port[i].phydev)
++			phy_start(priv->port[i].phydev);
++	netif_start_queue(dev);
++
++	return 0;
++}
++
++static int xrx200_close(struct net_device *dev)
++{
++	struct xrx200_priv *priv = netdev_priv(dev);
++	int i;
++
++	netif_stop_queue(dev);
++
++	for (i = 0; i < priv->num_port; i++)
++		if (priv->port[i].phydev)
++			phy_stop(priv->port[i].phydev);
++
++	for (i = 0; i < XRX200_MAX_DMA; i++) {
++		if (!priv->hw->chan[i].dma.irq)
++			continue;
++		spin_lock_bh(&priv->hw->lock);
++		priv->hw->chan[i].refcount--;
++		if (!priv->hw->chan[i].refcount) {
++			if (XRX200_DMA_IS_RX(i))
++				napi_disable(&priv->hw->chan[i].napi);
++			ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
++		}
++		spin_unlock_bh(&priv->hw->lock);
++	}
++
++	return 0;
++}
++
++static int xrx200_alloc_skb(struct xrx200_chan *ch)
++{
++#define DMA_PAD	(NET_IP_ALIGN + NET_SKB_PAD)
++	ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
++	if (!ch->skb[ch->dma.desc])
++		goto skip;
++
++	skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
++	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
++		ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
++			DMA_FROM_DEVICE);
++	ch->dma.desc_base[ch->dma.desc].addr =
++		CPHYSADDR(ch->skb[ch->dma.desc]->data);
++	skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
++
++skip:
++	ch->dma.desc_base[ch->dma.desc].ctl =
++		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
++		XRX200_DMA_DATA_LEN;
++
++	return 0;
++}
++
++static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
++{
++	struct net_device *dev = ch->devs[id];
++	struct xrx200_priv *priv = netdev_priv(dev);
++	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++	struct sk_buff *skb = ch->skb[ch->dma.desc];
++	int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
++	int ret;
++
++	ret = xrx200_alloc_skb(ch);
++
++	ch->dma.desc++;
++	ch->dma.desc %= LTQ_DESC_NUM;
++
++	if (ret) {
++		netdev_err(dev,
++			"failed to allocate new rx buffer\n");
++		return 0;
++	}
++
++	skb_put(skb, len);
++#ifdef SW_ROUTING
++	skb_pull(skb, 8);
++#endif
++	skb->dev = dev;
++	skb->protocol = eth_type_trans(skb, dev);
++	netif_receive_skb(skb);
++	priv->stats.rx_packets++;
++	priv->stats.rx_bytes+=len;
++}
++
++static int xrx200_poll_rx(struct napi_struct *napi, int budget)
++{
++	struct xrx200_chan *ch = container_of(napi,
++				struct xrx200_chan, napi);
++	struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
++	int rx = 0;
++	int complete = 0;
++
++	while ((rx < budget) && !complete) {
++		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++#ifdef SW_ROUTING
++			struct sk_buff *skb = ch->skb[ch->dma.desc];
++			u32 *special_tag = (u32*)skb->data;
++			int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK;
++			xrx200_hw_receive(ch, priv->hw->port_map[port]);
++#else
++			xrx200_hw_receive(ch, 0);
++#endif
++			rx++;
++		} else {
++			complete = 1;
++		}
++	}
++
++	if (complete || !rx) {
++		napi_complete(&ch->napi);
++		ltq_dma_enable_irq(&ch->dma);
++	}
++
++	return rx;
++}
++
++static void xrx200_tx_housekeeping(unsigned long ptr)
++{
++	struct xrx200_hw *hw = (struct xrx200_hw *) ptr;
++	struct xrx200_chan *ch = &hw->chan[XRX200_DMA_TX];
++	int pkts = 0;
++	int i;
++
++	spin_lock_bh(&hw->lock);
++	ltq_dma_ack_irq(&ch->dma);
++	while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++		struct sk_buff *skb = ch->skb[ch->tx_free];
++
++		pkts++;
++		ch->skb[ch->tx_free] = NULL;
++		dev_kfree_skb(skb);
++		memset(&ch->dma.desc_base[ch->tx_free], 0,
++			sizeof(struct ltq_dma_desc));
++		ch->tx_free++;
++		ch->tx_free %= LTQ_DESC_NUM;
++	}
++	ltq_dma_enable_irq(&ch->dma);
++	spin_unlock_bh(&hw->lock);
++
++	if (!pkts)
++		return;
++
++	for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++)
++		netif_wake_queue(ch->devs[i]);
++}
++
++static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
++{
++	struct xrx200_priv *priv = netdev_priv(dev);
++
++	return &priv->stats;
++}
++
++static void xrx200_tx_timeout(struct net_device *dev)
++{
++	struct xrx200_priv *priv = netdev_priv(dev);
++
++	printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
++
++	priv->stats.tx_errors++;
++	netif_wake_queue(dev);
++}
++
++static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct xrx200_priv *priv = netdev_priv(dev);
++	struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX];
++	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++	u32 byte_offset;
++	int len;
++#ifdef SW_ROUTING
++  #ifdef SW_PORTMAP
++	u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE;
++  #else
++	u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
++  #endif
++#endif
++
++	skb->dev = dev;
++	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
++
++	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
++		netdev_err(dev, "tx ring full\n");
++		netif_stop_queue(dev);
++		return NETDEV_TX_BUSY;
++	}
++#ifdef SW_ROUTING
++  #ifdef SW_PORTMAP
++	special_tag |= priv->port_map << PORT_MAP_SHIFT;
++  #else
++	if(priv->id)
++		special_tag |= (1 << DPID_SHIFT);
++  #endif
++	if(skb_headroom(skb) < 4) {
++		struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
++		dev_kfree_skb_any(skb);
++		skb = tmp;
++	}
++	skb_push(skb, 4);
++	memcpy(skb->data, &special_tag, sizeof(u32));
++	len += 4;
++#endif
++
++	/* dma needs to start on a 16 byte aligned address */
++	byte_offset = CPHYSADDR(skb->data) % 16;
++	ch->skb[ch->dma.desc] = skb;
++
++	dev->trans_start = jiffies;
++
++	spin_lock_bh(&priv->hw->lock);
++	desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
++						DMA_TO_DEVICE)) - byte_offset;
++	wmb();
++	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
++		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
++	ch->dma.desc++;
++	ch->dma.desc %= LTQ_DESC_NUM;
++	if (ch->dma.desc == ch->tx_free)
++		netif_stop_queue(dev);
++
++	spin_unlock_bh(&priv->hw->lock);
++
++	priv->stats.tx_packets++;
++	priv->stats.tx_bytes+=len;
++
++	return NETDEV_TX_OK;
++}
++
++static irqreturn_t xrx200_dma_irq(int irq, void *priv)
++{
++	struct xrx200_hw *hw = priv;
++	int chnr = irq - XRX200_DMA_IRQ;
++	struct xrx200_chan *ch = &hw->chan[chnr];
++
++	ltq_dma_disable_irq(&ch->dma);
++	ltq_dma_ack_irq(&ch->dma);
++
++	if (chnr % 2)
++		tasklet_schedule(&ch->tasklet);
++	else
++		napi_schedule(&ch->napi);
++
++	return IRQ_HANDLED;
++}
++
++static int xrx200_dma_init(struct xrx200_hw *hw)
++{
++	int i, err = 0;
++
++	ltq_dma_init_port(DMA_PORT_ETOP);
++
++	for (i = 0; i < 8 && !err; i++) {
++		int irq = XRX200_DMA_IRQ + i;
++		struct xrx200_chan *ch = &hw->chan[i];
++
++		ch->idx = ch->dma.nr = i;
++
++		if (i == XRX200_DMA_TX) {
++			ltq_dma_alloc_tx(&ch->dma);
++			err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
++		} else if (i == XRX200_DMA_RX) {
++			ltq_dma_alloc_rx(&ch->dma);
++			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
++					ch->dma.desc++)
++				if (xrx200_alloc_skb(ch))
++					err = -ENOMEM;
++			ch->dma.desc = 0;
++			err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
++		} else
++			continue;
++
++		if (!err)
++			ch->dma.irq = irq;
++	}
++
++	return err;
++}
++
++#ifdef SW_POLLING
++static void xrx200_gmac_update(struct xrx200_port *port)
++{
++	u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK;
++	u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
++	u16 miirate = 0;
++
++	switch (port->phydev->speed) {
++	case SPEED_1000:
++		phyaddr |= MDIO_PHY_SPEED_G1;
++		miirate = MII_CFG_RATE_M125;
++		break;
++
++	case SPEED_100:
++		phyaddr |= MDIO_PHY_SPEED_M100;
++		switch (miimode) {
++		case MII_CFG_MODE_RMIIM:
++		case MII_CFG_MODE_RMIIP:
++			miirate = MII_CFG_RATE_M50;
++			break;
++		default:
++			miirate = MII_CFG_RATE_M25;
++			break;
++		}
++		break;
++
++	default:
++		phyaddr |= MDIO_PHY_SPEED_M10;
++		miirate = MII_CFG_RATE_M2P5;
++		break;
++	}
++
++	if (port->phydev->link)
++		phyaddr |= MDIO_PHY_LINK_UP;
++	else
++		phyaddr |= MDIO_PHY_LINK_DOWN;
++
++	if (port->phydev->duplex == DUPLEX_FULL)
++		phyaddr |= MDIO_PHY_FDUP_EN;
++	else
++		phyaddr |= MDIO_PHY_FDUP_DIS;
++
++	ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
++	ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
++	udelay(1);
++}
++#else
++static void xrx200_gmac_update(struct xrx200_port *port)
++{
++
++}
++#endif
++
++static void xrx200_mdio_link(struct net_device *dev)
++{
++	struct xrx200_priv *priv = netdev_priv(dev);
++	int i;
++
++	for (i = 0; i < priv->num_port; i++) {
++		if (!priv->port[i].phydev)
++			continue;
++
++		if (priv->port[i].link != priv->port[i].phydev->link) {
++			xrx200_gmac_update(&priv->port[i]);
++			priv->port[i].link = priv->port[i].phydev->link;
++			netdev_info(dev, "port %d %s link\n",
++				priv->port[i].num,
++				(priv->port[i].link)?("got"):("lost"));
++		}
++	}
++}
++
++static inline int xrx200_mdio_poll(struct mii_bus *bus)
++{
++	unsigned cnt = 10000;
++
++	while (likely(cnt--)) {
++		unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
++		if ((ctrl & MDIO_BUSY) == 0)
++			return 0;
++	}
++
++	return 1;
++}
++
++static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
++{
++	if (xrx200_mdio_poll(bus))
++		return 1;
++
++	ltq_mdio_w32(val, MDIO_WRITE);
++	ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
++		((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
++		(reg & MDIO_MASK),
++		MDIO_CTRL);
++
++	return 0;
++}
++
++static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
++{
++	if (xrx200_mdio_poll(bus))
++		return -1;
++
++	ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
++		((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
++		(reg & MDIO_MASK),
++		MDIO_CTRL);
++
++	if (xrx200_mdio_poll(bus))
++		return -1;
++
++	return ltq_mdio_r32(MDIO_READ);
++}
++
++static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
++{
++	struct xrx200_priv *priv = netdev_priv(dev);
++	struct phy_device *phydev = NULL;
++	unsigned val;
++
++	phydev = priv->hw->mii_bus->phy_map[port->phy_addr];
++
++	if (!phydev) {
++		netdev_err(dev, "no PHY found\n");
++		return -ENODEV;
++	}
++
++	phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link,
++				port->phy_if);
++
++	if (IS_ERR(phydev)) {
++		netdev_err(dev, "Could not attach to PHY\n");
++		return PTR_ERR(phydev);
++	}
++
++	phydev->supported &= (SUPPORTED_10baseT_Half
++			| SUPPORTED_10baseT_Full
++			| SUPPORTED_100baseT_Half
++			| SUPPORTED_100baseT_Full
++			| SUPPORTED_1000baseT_Half
++			| SUPPORTED_1000baseT_Full
++			| SUPPORTED_Autoneg
++			| SUPPORTED_MII
++			| SUPPORTED_TP);
++	phydev->advertising = phydev->supported;
++	port->phydev = phydev;
++
++	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
++		dev->name, phydev->drv->name,
++		dev_name(&phydev->dev), phydev->irq);
++
++#ifdef SW_POLLING
++	phy_read_status(phydev);
++
++	val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
++	val |= ADVERTIZE_MPD;
++	xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
++	xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
++
++	phy_start_aneg(phydev);
++#endif
++	return 0;
++}
++
++static void xrx200_port_config(struct xrx200_priv *priv,
++		const struct xrx200_port *port)
++{
++	u16 miimode = 0;
++
++	switch (port->num) {
++	case 0: /* xMII0 */
++	case 1: /* xMII1 */
++		switch (port->phy_if) {
++		case PHY_INTERFACE_MODE_MII:
++			if (port->flags & XRX200_PORT_TYPE_PHY)
++				/* MII MAC mode, connected to external PHY */
++				miimode = MII_CFG_MODE_MIIM;
++			else
++				/* MII PHY mode, connected to external MAC */
++				miimode = MII_CFG_MODE_MIIP;
++			break;
++		case PHY_INTERFACE_MODE_RMII:
++			if (port->flags & XRX200_PORT_TYPE_PHY)
++				/* RMII MAC mode, connected to external PHY */
++				miimode = MII_CFG_MODE_RMIIM;
++			else
++				/* RMII PHY mode, connected to external MAC */
++				miimode = MII_CFG_MODE_RMIIP;
++			break;
++		case PHY_INTERFACE_MODE_RGMII:
++			/* RGMII MAC mode, connected to external PHY */
++			miimode = MII_CFG_MODE_RGMII;
++			break;
++		default:
++			break;
++		}
++		break;
++	case 2: /* internal GPHY0 */
++	case 3: /* internal GPHY0 */
++	case 4: /* internal GPHY1 */
++		switch (port->phy_if) {
++			case PHY_INTERFACE_MODE_MII:
++			case PHY_INTERFACE_MODE_GMII:
++				/* MII MAC mode, connected to internal GPHY */
++				miimode = MII_CFG_MODE_MIIM;
++				break;
++			default:
++				break;
++		}
++		break;
++	case 5: /* internal GPHY1 or xMII2 */
++		switch (port->phy_if) {
++		case PHY_INTERFACE_MODE_MII:
++			/* MII MAC mode, connected to internal GPHY */
++			miimode = MII_CFG_MODE_MIIM;
++			break;
++		case PHY_INTERFACE_MODE_RGMII:
++			/* RGMII MAC mode, connected to external PHY */
++			miimode = MII_CFG_MODE_RGMII;
++			break;
++		default:
++			break;
++		}
++		break;
++	default:
++		break;
++	}
++
++	ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
++		MII_CFG(port->num));
++}
++
++static int xrx200_init(struct net_device *dev)
++{
++	struct xrx200_priv *priv = netdev_priv(dev);
++	struct sockaddr mac;
++	int err, i;
++
++#ifndef SW_POLLING
++	unsigned int reg = 0;
++
++	/* enable auto polling */
++	for (i = 0; i < priv->num_port; i++)
++		reg |= BIT(priv->port[i].num);
++	ltq_mdio_w32(reg, MDIO_CLK_CFG0);
++	ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
++#endif
++
++	/* setup each port */
++	for (i = 0; i < priv->num_port; i++)
++		xrx200_port_config(priv, &priv->port[i]);
++
++	memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
++	if (!is_valid_ether_addr(mac.sa_data)) {
++		pr_warn("net-xrx200: invalid MAC, using random\n");
++		eth_random_addr(mac.sa_data);
++		dev->addr_assign_type |= NET_ADDR_RANDOM;
++	}
++
++	err = eth_mac_addr(dev, &mac);
++	if (err)
++		goto err_netdev;
++
++	for (i = 0; i < priv->num_port; i++)
++		if (xrx200_mdio_probe(dev, &priv->port[i]))
++			pr_warn("xrx200-mdio: probing phy of port %d failed\n",
++					 priv->port[i].num);
++
++	return 0;
++
++err_netdev:
++	unregister_netdev(dev);
++	free_netdev(dev);
++	return err;
++}
++
++static void xrx200_pci_microcode(void)
++{
++	int i;
++
++	ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
++		PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
++	ltq_switch_w32(0, PCE_TBL_MASK);
++
++	for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
++		ltq_switch_w32(i, PCE_TBL_ADDR);
++		ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
++		ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
++		ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
++		ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
++
++		// start the table access:
++		ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
++		while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
++	}
++
++	/* tell the switch that the microcode is loaded */
++	ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
++}
++
++static void xrx200_hw_init(struct xrx200_hw *hw)
++{
++	int i;
++
++	/* enable clock gate */
++	clk_enable(hw->clk);
++
++	ltq_switch_w32(1, 0);
++	mdelay(100);
++	ltq_switch_w32(0, 0);
++	/*
++	 * TODO: we should really disbale all phys/miis here and explicitly
++	 * enable them in the device secific init function
++	 */
++
++	/* disable port fetch/store dma */
++	for (i = 0; i < 7; i++ ) {
++		ltq_switch_w32(0, FDMA_PCTRLx(i));
++		ltq_switch_w32(0, SDMA_PCTRLx(i));
++	}
++
++	/* enable Switch */
++	ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
++
++	/* load the pce microcode */
++	xrx200_pci_microcode();
++
++	/* Default unknown Broadcat/Multicast/Unicast port maps */
++	ltq_switch_w32(0x7f, PCE_PMAP1);
++	ltq_switch_w32(0x7f, PCE_PMAP2);
++	ltq_switch_w32(0x7f, PCE_PMAP3);
++
++	/* RMON Counter Enable for all physical ports */
++	for (i = 0; i < 7; i++)
++		ltq_switch_w32(0x1, BM_PCFG(i));
++
++	/* disable auto polling */
++	ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
++
++	/* enable port statistic counters */
++	for (i = 0; i < 7; i++)
++		ltq_switch_w32(0x1, BM_PCFGx(i));
++
++	/* set IPG to 12 */
++	ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
++
++#ifdef SW_ROUTING
++	/* enable status header, enable CRC */
++	ltq_pmac_w32_mask(0,
++		PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
++		PMAC_HD_CTL);
++#else
++	/* disable status header, enable CRC */
++	ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
++		PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
++		PMAC_HD_CTL);
++#endif
++
++	/* enable port fetch/store dma & VLAN Modification */
++	for (i = 0; i < 7; i++ ) {
++		ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i));
++		ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
++		ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
++	}
++
++	/* enable special tag insertion on cpu port */
++	ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
++	ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
++	ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
++	ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
++}
++
++static void xrx200_hw_cleanup(struct xrx200_hw *hw)
++{
++	int i;
++
++	/* disable the switch */
++	ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
++
++	/* free the channels and IRQs */
++	for (i = 0; i < 2; i++) {
++		ltq_dma_free(&hw->chan[i].dma);
++		if (hw->chan[i].dma.irq)
++			free_irq(hw->chan[i].dma.irq, hw);
++	}
++
++	/* free the allocated RX ring */
++	for (i = 0; i < LTQ_DESC_NUM; i++)
++		dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
++
++	/* clear the mdio bus */
++	mdiobus_unregister(hw->mii_bus);
++	mdiobus_free(hw->mii_bus);
++
++	/* release the clock */
++	clk_disable(hw->clk);
++	clk_put(hw->clk);
++}
++
++static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
++{
++	hw->mii_bus = mdiobus_alloc();
++	if (!hw->mii_bus)
++		return -ENOMEM;
++
++	hw->mii_bus->read = xrx200_mdio_rd;
++	hw->mii_bus->write = xrx200_mdio_wr;
++	hw->mii_bus->name = "lantiq,xrx200-mdio";
++	snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
++
++	if (of_mdiobus_register(hw->mii_bus, np)) {
++		mdiobus_free(hw->mii_bus);
++		return -ENXIO;
++	}
++
++	return 0;
++}
++
++static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
++{
++	const __be32 *addr, *id = of_get_property(port, "reg", NULL);
++	struct xrx200_port *p = &priv->port[priv->num_port];
++
++	if (!id)
++		return;
++
++	memset(p, 0, sizeof(struct xrx200_port));
++	p->phy_node = of_parse_phandle(port, "phy-handle", 0);
++	addr = of_get_property(p->phy_node, "reg", NULL);
++	if (!addr)
++		return;
++
++	p->num = *id;
++	p->phy_addr = *addr;
++	p->phy_if = of_get_phy_mode(port);
++	if (p->phy_addr > 0x10)
++		p->flags = XRX200_PORT_TYPE_MAC;
++	else
++		p->flags = XRX200_PORT_TYPE_PHY;
++	priv->num_port++;
++
++	p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
++	if (gpio_is_valid(p->gpio))
++		if (!gpio_request(p->gpio, "phy-reset")) {
++			gpio_direction_output(p->gpio,
++				(p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
++			udelay(100);
++			gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
++		}
++	/* is this port a wan port ? */
++	if (priv->wan)
++		priv->hw->wan_map |= BIT(p->num);
++
++	priv->port_map |= BIT(p->num);
++
++	/* store the port id in the hw struct so we can map ports -> devices */
++	priv->hw->port_map[p->num] = priv->hw->num_devs;
++}
++
++static const struct net_device_ops xrx200_netdev_ops = {
++	.ndo_init		= xrx200_init,
++	.ndo_open		= xrx200_open,
++	.ndo_stop		= xrx200_close,
++	.ndo_start_xmit		= xrx200_start_xmit,
++	.ndo_set_mac_address	= eth_mac_addr,
++	.ndo_validate_addr	= eth_validate_addr,
++	.ndo_change_mtu		= eth_change_mtu,
++	.ndo_get_stats		= xrx200_get_stats,
++	.ndo_tx_timeout		= xrx200_tx_timeout,
++};
++
++static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface)
++{
++	struct xrx200_priv *priv;
++	struct device_node *port;
++	const __be32 *wan;
++	const u8 *mac;
++
++	/* alloc the network device */
++	hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
++	if (!hw->devs[hw->num_devs])
++		return;
++
++	/* setup the network device */
++	strcpy(hw->devs[hw->num_devs]->name, "eth%d");
++	hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
++	hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
++	hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
++
++	/* setup our private data */
++	priv = netdev_priv(hw->devs[hw->num_devs]);
++	priv->hw = hw;
++	priv->id = hw->num_devs;
++
++	mac = of_get_mac_address(iface);
++	if (mac)
++		memcpy(priv->mac, mac, ETH_ALEN);
++
++	/* is this the wan interface ? */
++	wan = of_get_property(iface, "lantiq,wan", NULL);
++	if (wan && (*wan == 1))
++		priv->wan = 1;
++
++	/* should the switch be enabled on this interface ? */
++	if (of_find_property(iface, "lantiq,switch", NULL))
++		priv->sw = 1;
++
++	/* load the ports that are part of the interface */
++	for_each_child_of_node(iface, port)
++		if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
++			xrx200_of_port(priv, port);
++
++	/* register the actual device */
++	if (!register_netdev(hw->devs[hw->num_devs]))
++		hw->num_devs++;
++}
++
++static struct xrx200_hw xrx200_hw;
++
++static int xrx200_probe(struct platform_device *pdev)
++{
++	struct resource *res[4];
++	struct device_node *mdio_np, *iface_np;
++	int i;
++
++	/* load the memory ranges */
++	for (i = 0; i < 4; i++) {
++		res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
++		if (!res[i]) {
++			dev_err(&pdev->dev, "failed to get resources\n");
++			return -ENOENT;
++		}
++	}
++	xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]);
++	xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]);
++	xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]);
++	xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]);
++	if (!xrx200_switch_membase || !xrx200_mdio_membase ||
++			!xrx200_mii_membase || !xrx200_pmac_membase) {
++		dev_err(&pdev->dev, "failed to request and remap io ranges \n");
++		return -ENOMEM;
++	}
++
++	/* get the clock */
++	xrx200_hw.clk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(xrx200_hw.clk)) {
++		dev_err(&pdev->dev, "failed to get clock\n");
++		return PTR_ERR(xrx200_hw.clk);
++	}
++
++	/* bring up the dma engine and IP core */
++	spin_lock_init(&xrx200_hw.lock);
++	xrx200_dma_init(&xrx200_hw);
++	xrx200_hw_init(&xrx200_hw);
++	tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw);
++
++	/* bring up the mdio bus */
++	mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
++				"lantiq,xrx200-mdio");
++	if (mdio_np)
++		if (xrx200_of_mdio(&xrx200_hw, mdio_np))
++			dev_err(&pdev->dev, "mdio probe failed\n");
++
++	/* load the interfaces */
++	for_each_child_of_node(pdev->dev.of_node, iface_np)
++		if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
++			if (xrx200_hw.num_devs < XRX200_MAX_DEV)
++				xrx200_of_iface(&xrx200_hw, iface_np);
++			else
++				dev_err(&pdev->dev,
++					"only %d interfaces allowed\n",
++					XRX200_MAX_DEV);
++		}
++
++	if (!xrx200_hw.num_devs) {
++		xrx200_hw_cleanup(&xrx200_hw);
++		dev_err(&pdev->dev, "failed to load interfaces\n");
++		return -ENOENT;
++	}
++
++	xrx200sw_init(&xrx200_hw);
++
++	/* set wan port mask */
++	ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
++
++	for (i = 0; i < xrx200_hw.num_devs; i++) {
++		xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
++		xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
++	}
++
++	/* setup NAPI */
++	init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
++	netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
++			&xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
++
++	platform_set_drvdata(pdev, &xrx200_hw);
++
++	return 0;
++}
++
++static int xrx200_remove(struct platform_device *pdev)
++{
++	struct net_device *dev = platform_get_drvdata(pdev);
++	struct xrx200_priv *priv;
++
++	if (!dev)
++		return 0;
++
++	priv = netdev_priv(dev);
++
++	/* free stack related instances */
++	netif_stop_queue(dev);
++	netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
++
++	/* shut down hardware */
++	xrx200_hw_cleanup(&xrx200_hw);
++
++	/* remove the actual device */
++	unregister_netdev(dev);
++	free_netdev(dev);
++
++	return 0;
++}
++
++static const struct of_device_id xrx200_match[] = {
++	{ .compatible = "lantiq,xrx200-net" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, xrx200_match);
++
++static struct platform_driver xrx200_driver = {
++	.probe = xrx200_probe,
++	.remove = xrx200_remove,
++	.driver = {
++		.name = "lantiq,xrx200-net",
++		.of_match_table = xrx200_match,
++		.owner = THIS_MODULE,
++	},
++};
++
++module_platform_driver(xrx200_driver);
++
++MODULE_AUTHOR("John Crispin <blogic at openwrt.org>");
++MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/net/ethernet/lantiq_xrx200_sw.h
+@@ -0,0 +1,1328 @@
++/*
++ *   This program is free software; you can redistribute it and/or modify it
++ *   under the terms of the GNU General Public License version 2 as published
++ *   by the Free Software Foundation.
++ *
++ *   This program is distributed in the hope that it will be useful,
++ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *   GNU General Public License for more details.
++ *
++ *   You should have received a copy of the GNU General Public License
++ *   along with this program; if not, write to the Free Software
++ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ *   Copyright (C) 2010 Lantiq Deutschland GmbH
++ *   Copyright (C) 2013 Antonios Vamporakis <vamporakis at yahoo.com>
++ *
++ *   VR9 switch registers extracted from 310TUJ0 switch api
++ *   WARNING mult values of 0x00 may not be correct
++ *
++ */
++
++enum {
++//	XRX200_ETHSW_SWRES,            /* Ethernet Switch ResetControl Register */
++//	XRX200_ETHSW_SWRES_R1,         /* Hardware Reset */
++//	XRX200_ETHSW_SWRES_R0,         /* Register Configuration */
++//	XRX200_ETHSW_CLK_MAC_GAT,      /* Ethernet Switch Clock ControlRegister  */
++//	XRX200_ETHSW_CLK_EXP_SLEEP,    /* Exponent to put system into sleep */
++//	XRX200_ETHSW_CLK_EXP_WAKE,     /* Exponent to wake up system */
++//	XRX200_ETHSW_CLK_CLK2_EN,      /* CLK2 Input for MAC */
++//	XRX200_ETHSW_CLK_EXT_DIV_EN,   /* External Clock Divider Enable */
++//	XRX200_ETHSW_CLK_RAM_DBG_EN,   /* Clock Gating Enable */
++//	XRX200_ETHSW_CLK_REG_GAT_EN,   /* Clock Gating Enable */
++//	XRX200_ETHSW_CLK_GAT_EN,       /* Clock Gating Enable */
++//	XRX200_ETHSW_CLK_MAC_GAT_EN,   /* Clock Gating Enable */
++//	XRX200_ETHSW_DBG_STEP,         /* Ethernet Switch Debug ControlRegister */
++//	XRX200_ETHSW_DBG_CLK_SEL,      /* Trigger Enable */
++//	XRX200_ETHSW_DBG_MON_EN,       /* Monitoring Enable */
++//	XRX200_ETHSW_DBG_TRIG_EN,      /* Trigger Enable */
++//	XRX200_ETHSW_DBG_MODE,         /* Debug Mode */
++//	XRX200_ETHSW_DBG_STEP_TIME,    /* Clock Step Size */
++//	XRX200_ETHSW_SSB_MODE,         /* Ethernet Switch SharedSegment Buffer Mode Register */
++//	XRX200_ETHSW_SSB_MODE_ADDE,    /* Memory Address */
++//	XRX200_ETHSW_SSB_MODE_MODE,    /* Memory Access Mode */
++//	XRX200_ETHSW_SSB_ADDR,         /* Ethernet Switch SharedSegment Buffer Address Register */
++//	XRX200_ETHSW_SSB_ADDR_ADDE,    /* Memory Address */
++//	XRX200_ETHSW_SSB_DATA,         /* Ethernet Switch SharedSegment Buffer Data Register */
++//	XRX200_ETHSW_SSB_DATA_DATA,    /* Data Value */
++//	XRX200_ETHSW_CAP_0,            /* Ethernet Switch CapabilityRegister 0 */
++//	XRX200_ETHSW_CAP_0_SPEED,      /* Clock frequency */
++//	XRX200_ETHSW_CAP_1,            /* Ethernet Switch CapabilityRegister 1 */
++//	XRX200_ETHSW_CAP_1_GMAC,       /* MAC operation mode */
++//	XRX200_ETHSW_CAP_1_QUEUE,      /* Number of queues */
++//	XRX200_ETHSW_CAP_1_VPORTS,     /* Number of virtual ports */
++//	XRX200_ETHSW_CAP_1_PPORTS,     /* Number of physical ports */
++//	XRX200_ETHSW_CAP_2,            /* Ethernet Switch CapabilityRegister 2 */
++//	XRX200_ETHSW_CAP_2_PACKETS,    /* Number of packets */
++//	XRX200_ETHSW_CAP_3,            /* Ethernet Switch CapabilityRegister 3 */
++//	XRX200_ETHSW_CAP_3_METERS,     /* Number of traffic meters */
++//	XRX200_ETHSW_CAP_3_SHAPERS,    /* Number of traffic shapers */
++//	XRX200_ETHSW_CAP_4,            /* Ethernet Switch CapabilityRegister 4 */
++//	XRX200_ETHSW_CAP_4_PPPOE,      /* PPPoE table size */
++//	XRX200_ETHSW_CAP_4_VLAN,       /* Active VLAN table size */
++//	XRX200_ETHSW_CAP_5,            /* Ethernet Switch CapabilityRegister 5 */
++//	XRX200_ETHSW_CAP_5_IPPLEN,     /* IP packet length table size */
++//	XRX200_ETHSW_CAP_5_PROT,       /* Protocol table size */
++//	XRX200_ETHSW_CAP_6,            /* Ethernet Switch CapabilityRegister 6 */
++//	XRX200_ETHSW_CAP_6_MACDASA,    /* MAC DA/SA table size */
++//	XRX200_ETHSW_CAP_6_APPL,       /* Application table size */
++//	XRX200_ETHSW_CAP_7,            /* Ethernet Switch CapabilityRegister 7 */
++//	XRX200_ETHSW_CAP_7_IPDASAM,    /* IP DA/SA MSB table size */
++//	XRX200_ETHSW_CAP_7_IPDASAL,    /* IP DA/SA LSB table size */
++//	XRX200_ETHSW_CAP_8,            /* Ethernet Switch CapabilityRegister 8 */
++//	XRX200_ETHSW_CAP_8_MCAST,      /* Multicast table size */
++//	XRX200_ETHSW_CAP_9,            /* Ethernet Switch CapabilityRegister 9 */
++//	XRX200_ETHSW_CAP_9_FLAGG,      /* Flow Aggregation table size */
++//	XRX200_ETHSW_CAP_10,           /* Ethernet Switch CapabilityRegister 10 */
++//	XRX200_ETHSW_CAP_10_MACBT,     /* MAC bridging table size */
++//	XRX200_ETHSW_CAP_11,           /* Ethernet Switch CapabilityRegister 11 */
++//	XRX200_ETHSW_CAP_11_BSIZEL,    /* Packet buffer size (lower part, in byte) */
++//	XRX200_ETHSW_CAP_12,           /* Ethernet Switch CapabilityRegister 12 */
++//	XRX200_ETHSW_CAP_12_BSIZEH,    /* Packet buffer size (higher part, in byte) */
++//	XRX200_ETHSW_VERSION_REV,      /* Ethernet Switch VersionRegister */
++//	XRX200_ETHSW_VERSION_MOD_ID,   /* Module Identification */
++//	XRX200_ETHSW_VERSION_REV_ID,   /* Hardware Revision Identification */
++//	XRX200_ETHSW_IER,              /* Interrupt Enable Register */
++//	XRX200_ETHSW_IER_FDMAIE,       /* Fetch DMA Interrupt Enable */
++//	XRX200_ETHSW_IER_SDMAIE,       /* Store DMA Interrupt Enable */
++//	XRX200_ETHSW_IER_MACIE,        /* Ethernet MAC Interrupt Enable */
++//	XRX200_ETHSW_IER_PCEIE,        /* Parser and Classification Engine Interrupt Enable */
++//	XRX200_ETHSW_IER_BMIE,         /* Buffer Manager Interrupt Enable */
++//	XRX200_ETHSW_ISR,              /* Interrupt Status Register */
++//	XRX200_ETHSW_ISR_FDMAINT,      /* Fetch DMA Interrupt */
++//	XRX200_ETHSW_ISR_SDMAINT,      /* Store DMA Interrupt */
++//	XRX200_ETHSW_ISR_MACINT,       /* Ethernet MAC Interrupt */
++//	XRX200_ETHSW_ISR_PCEINT,       /* Parser and Classification Engine Interrupt */
++//	XRX200_ETHSW_ISR_BMINT,        /* Buffer Manager Interrupt */
++//	XRX200_ETHSW_SPARE_0,          /* Ethernet Switch SpareCells 0 */
++//	XRX200_ETHSW_SPARE_0_SPARE,    /* SPARE0  */
++//	XRX200_ETHSW_SPARE_1,          /* Ethernet Switch SpareCells 1 */
++//	XRX200_ETHSW_SPARE_1_SPARE,    /* SPARE1  */
++//	XRX200_ETHSW_SPARE_2,          /* Ethernet Switch SpareCells 2 */
++//	XRX200_ETHSW_SPARE_2_SPARE,    /* SPARE2  */
++//	XRX200_ETHSW_SPARE_3,          /* Ethernet Switch SpareCells 3 */
++//	XRX200_ETHSW_SPARE_3_SPARE,    /* SPARE3  */
++//	XRX200_ETHSW_SPARE_4,          /* Ethernet Switch SpareCells 4 */
++//	XRX200_ETHSW_SPARE_4_SPARE,    /* SPARE4  */
++//	XRX200_ETHSW_SPARE_5,          /* Ethernet Switch SpareCells 5 */
++//	XRX200_ETHSW_SPARE_5_SPARE,    /* SPARE5  */
++//	XRX200_ETHSW_SPARE_6,          /* Ethernet Switch SpareCells 6 */
++//	XRX200_ETHSW_SPARE_6_SPARE,    /* SPARE6  */
++//	XRX200_ETHSW_SPARE_7,          /* Ethernet Switch SpareCells 7 */
++//	XRX200_ETHSW_SPARE_7_SPARE,    /* SPARE7  */
++//	XRX200_ETHSW_SPARE_8,          /* Ethernet Switch SpareCells 8 */
++//	XRX200_ETHSW_SPARE_8_SPARE,    /* SPARE8  */
++//	XRX200_ETHSW_SPARE_9,          /* Ethernet Switch SpareCells 9 */
++//	XRX200_ETHSW_SPARE_9_SPARE,    /* SPARE9  */
++//	XRX200_ETHSW_SPARE_10,         /* Ethernet Switch SpareCells 10 */
++//	XRX200_ETHSW_SPARE_10_SPARE,   /* SPARE10  */
++//	XRX200_ETHSW_SPARE_11,         /* Ethernet Switch SpareCells 11 */
++//	XRX200_ETHSW_SPARE_11_SPARE,   /* SPARE11  */
++//	XRX200_ETHSW_SPARE_12,         /* Ethernet Switch SpareCells 12 */
++//	XRX200_ETHSW_SPARE_12_SPARE,   /* SPARE12  */
++//	XRX200_ETHSW_SPARE_13,         /* Ethernet Switch SpareCells 13 */
++//	XRX200_ETHSW_SPARE_13_SPARE,   /* SPARE13  */
++//	XRX200_ETHSW_SPARE_14,         /* Ethernet Switch SpareCells 14 */
++//	XRX200_ETHSW_SPARE_14_SPARE,   /* SPARE14  */
++//	XRX200_ETHSW_SPARE_15,         /* Ethernet Switch SpareCells 15 */
++//	XRX200_ETHSW_SPARE_15_SPARE,   /* SPARE15  */
++//	XRX200_BM_RAM_VAL_3,           /* RAM Value Register 3 */
++//	XRX200_BM_RAM_VAL_3_VAL3,      /* Data value [15:0] */
++//	XRX200_BM_RAM_VAL_2,           /* RAM Value Register 2 */
++//	XRX200_BM_RAM_VAL_2_VAL2,      /* Data value [15:0] */
++//	XRX200_BM_RAM_VAL_1,           /* RAM Value Register 1 */
++//	XRX200_BM_RAM_VAL_1_VAL1,      /* Data value [15:0] */
++//	XRX200_BM_RAM_VAL_0,           /* RAM Value Register 0 */
++//	XRX200_BM_RAM_VAL_0_VAL0,      /* Data value [15:0] */
++//	XRX200_BM_RAM_ADDR,            /* RAM Address Register */
++//	XRX200_BM_RAM_ADDR_ADDR,       /* RAM Address */
++//	XRX200_BM_RAM_CTRL,            /* RAM Access Control Register */
++//	XRX200_BM_RAM_CTRL_BAS,        /* Access Busy/Access Start */
++//	XRX200_BM_RAM_CTRL_OPMOD,      /* Lookup Table Access Operation Mode */
++//	XRX200_BM_RAM_CTRL_ADDR,       /* Address for RAM selection */
++//	XRX200_BM_FSQM_GCTRL,          /* Free Segment Queue ManagerGlobal Control Register */
++//	XRX200_BM_FSQM_GCTRL_SEGNUM,   /* Maximum Segment Number */
++//	XRX200_BM_CONS_SEG,            /* Number of Consumed SegmentsRegister */
++//	XRX200_BM_CONS_SEG_FSEG,       /* Number of Consumed Segments */
++//	XRX200_BM_CONS_PKT,            /* Number of Consumed PacketPointers Register */
++//	XRX200_BM_CONS_PKT_FQP,        /* Number of Consumed Packet Pointers */
++//	XRX200_BM_GCTRL_F,             /* Buffer Manager Global ControlRegister 0 */
++//	XRX200_BM_GCTRL_BM_STA,        /* Buffer Manager Initialization Status Bit */
++//	XRX200_BM_GCTRL_SAT,           /* RMON Counter Update Mode */
++//	XRX200_BM_GCTRL_FR_RBC,        /* Freeze RMON RX Bad Byte 64 Bit Counter */
++//	XRX200_BM_GCTRL_FR_RGC,        /* Freeze RMON RX Good Byte 64 Bit Counter */
++//	XRX200_BM_GCTRL_FR_TGC,        /* Freeze RMON TX Good Byte 64 Bit Counter */
++//	XRX200_BM_GCTRL_I_FIN,         /* RAM initialization finished */
++//	XRX200_BM_GCTRL_CX_INI,        /* PQM Context RAM initialization */
++//	XRX200_BM_GCTRL_FP_INI,        /* FPQM RAM initialization */
++//	XRX200_BM_GCTRL_FS_INI,        /* FSQM RAM initialization */
++//	XRX200_BM_GCTRL_R_SRES,        /* Software Reset for RMON */
++//	XRX200_BM_GCTRL_S_SRES,        /* Software Reset for Scheduler */
++//	XRX200_BM_GCTRL_A_SRES,        /* Software Reset for AVG */
++//	XRX200_BM_GCTRL_P_SRES,        /* Software Reset for PQM */
++//	XRX200_BM_GCTRL_F_SRES,        /* Software Reset for FSQM */
++//	XRX200_BM_QUEUE_GCTRL,         /* Queue Manager GlobalControl Register 0 */
++//	XRX200_BM_QUEUE_GCTRL_GL_MOD,  /* WRED Mode Signal */
++//	XRX200_BM_QUEUE_GCTRL_AQUI,    /* Average Queue Update Interval */
++//	XRX200_BM_QUEUE_GCTRL_AQWF,    /* Average Queue Weight Factor */
++//	XRX200_BM_QUEUE_GCTRL_QAVGEN,  /* Queue Average Calculation Enable */
++//	XRX200_BM_QUEUE_GCTRL_DPROB,   /* Drop Probability Profile */
++//	XRX200_BM_WRED_RTH_0,          /* WRED Red Threshold Register0 */
++//	XRX200_BM_WRED_RTH_0_MINTH,    /* Minimum Threshold */
++//	XRX200_BM_WRED_RTH_1,          /* WRED Red Threshold Register1 */
++//	XRX200_BM_WRED_RTH_1_MAXTH,    /* Maximum Threshold */
++//	XRX200_BM_WRED_YTH_0,          /* WRED Yellow ThresholdRegister 0 */
++//	XRX200_BM_WRED_YTH_0_MINTH,    /* Minimum Threshold */
++//	XRX200_BM_WRED_YTH_1,          /* WRED Yellow ThresholdRegister 1 */
++//	XRX200_BM_WRED_YTH_1_MAXTH,    /* Maximum Threshold */
++//	XRX200_BM_WRED_GTH_0,          /* WRED Green ThresholdRegister 0 */
++//	XRX200_BM_WRED_GTH_0_MINTH,    /* Minimum Threshold */
++//	XRX200_BM_WRED_GTH_1,          /* WRED Green ThresholdRegister 1 */
++//	XRX200_BM_WRED_GTH_1_MAXTH,    /* Maximum Threshold */
++//	XRX200_BM_DROP_GTH_0_THR,      /* Drop Threshold ConfigurationRegister 0 */
++//	XRX200_BM_DROP_GTH_0_THR_FQ,   /* Threshold for frames marked red */
++//	XRX200_BM_DROP_GTH_1_THY,      /* Drop Threshold ConfigurationRegister 1 */
++//	XRX200_BM_DROP_GTH_1_THY_FQ,   /* Threshold for frames marked yellow */
++//	XRX200_BM_DROP_GTH_2_THG,      /* Drop Threshold ConfigurationRegister 2 */
++//	XRX200_BM_DROP_GTH_2_THG_FQ,   /* Threshold for frames marked green */
++//	XRX200_BM_IER,                 /* Buffer Manager Global InterruptEnable Register */
++//	XRX200_BM_IER_CNT4,            /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
++//	XRX200_BM_IER_CNT3,            /* Counter Group 3 (RMON-PQM) Interrupt Enable */
++//	XRX200_BM_IER_CNT2,            /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
++//	XRX200_BM_IER_CNT1,            /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */
++//	XRX200_BM_IER_CNT0,            /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */
++//	XRX200_BM_IER_DEQ,             /* PQM dequeue Interrupt Enable */
++//	XRX200_BM_IER_ENQ,             /* PQM Enqueue Interrupt Enable */
++//	XRX200_BM_IER_FSQM,            /* Buffer Empty Interrupt Enable */
++//	XRX200_BM_ISR,                 /* Buffer Manager Global InterruptStatus Register */
++//	XRX200_BM_ISR_CNT4,            /* Counter Group 4 Interrupt */
++//	XRX200_BM_ISR_CNT3,            /* Counter Group 3 Interrupt */
++//	XRX200_BM_ISR_CNT2,            /* Counter Group 2 Interrupt */
++//	XRX200_BM_ISR_CNT1,            /* Counter Group 1 Interrupt */
++//	XRX200_BM_ISR_CNT0,            /* Counter Group 0 Interrupt */
++//	XRX200_BM_ISR_DEQ,             /* PQM dequeue Interrupt Enable */
++//	XRX200_BM_ISR_ENQ,             /* PQM Enqueue Interrupt */
++//	XRX200_BM_ISR_FSQM,            /* Buffer Empty Interrupt */
++//	XRX200_BM_CISEL,               /* Buffer Manager RMON CounterInterrupt Select Register */
++//	XRX200_BM_CISEL_PORT,          /* Port Number */
++//	XRX200_BM_DEBUG_CTRL_DBG,      /* Debug Control Register */
++//	XRX200_BM_DEBUG_CTRL_DBG_SEL,  /* Select Signal for Debug Multiplexer */
++//	XRX200_BM_DEBUG_VAL_DBG,       /* Debug Value Register */
++//	XRX200_BM_DEBUG_VAL_DBG_DAT,   /* Debug Data Value */
++//	XRX200_BM_PCFG,                /* Buffer Manager PortConfiguration Register */
++//	XRX200_BM_PCFG_CNTEN,          /* RMON Counter Enable */
++//	XRX200_BM_RMON_CTRL_RAM1,      /* Buffer ManagerRMON Control Register */
++//	XRX200_BM_RMON_CTRL_RAM2_RES,  /* Software Reset for RMON RAM2 */
++//	XRX200_BM_RMON_CTRL_RAM1_RES,  /* Software Reset for RMON RAM1 */
++//	XRX200_PQM_DP,                 /* Packet Queue ManagerDrop Probability Register */
++//	XRX200_PQM_DP_DPROB,           /* Drop Probability Profile */
++//	XRX200_PQM_RS,                 /* Packet Queue ManagerRate Shaper Assignment Register */
++//	XRX200_PQM_RS_EN2,             /* Rate Shaper 2 Enable */
++//	XRX200_PQM_RS_RS2,             /* Rate Shaper 2 */
++//	XRX200_PQM_RS_EN1,             /* Rate Shaper 1 Enable */
++//	XRX200_PQM_RS_RS1,             /* Rate Shaper 1 */
++//	XRX200_RS_CTRL,                /* Rate Shaper ControlRegister */
++//	XRX200_RS_CTRL_RSEN,           /* Rate Shaper Enable */
++//	XRX200_RS_CBS,                 /* Rate Shaper CommittedBurst Size Register */
++//	XRX200_RS_CBS_CBS,             /* Committed Burst Size */
++//	XRX200_RS_IBS,                 /* Rate Shaper InstantaneousBurst Size Register */
++//	XRX200_RS_IBS_IBS,             /* Instantaneous Burst Size */
++//	XRX200_RS_CIR_EXP,             /* Rate Shaper RateExponent Register */
++//	XRX200_RS_CIR_EXP_EXP,         /* Exponent */
++//	XRX200_RS_CIR_MANT,            /* Rate Shaper RateMantissa Register */
++//	XRX200_RS_CIR_MANT_MANT,       /* Mantissa */
++	XRX200_PCE_TBL_KEY_7,          /* Table Key Data 7 */
++//	XRX200_PCE_TBL_KEY_7_KEY7,     /* Key Value[15:0] */
++	XRX200_PCE_TBL_KEY_6,          /* Table Key Data 6 */
++//	XRX200_PCE_TBL_KEY_6_KEY6,     /* Key Value[15:0] */
++	XRX200_PCE_TBL_KEY_5,          /* Table Key Data 5 */
++//	XRX200_PCE_TBL_KEY_5_KEY5,     /* Key Value[15:0] */
++	XRX200_PCE_TBL_KEY_4,          /* Table Key Data 4 */
++//	XRX200_PCE_TBL_KEY_4_KEY4,     /* Key Value[15:0] */
++	XRX200_PCE_TBL_KEY_3,          /* Table Key Data 3 */
++//	XRX200_PCE_TBL_KEY_3_KEY3,     /* Key Value[15:0] */
++	XRX200_PCE_TBL_KEY_2,          /* Table Key Data 2 */
++//	XRX200_PCE_TBL_KEY_2_KEY2,     /* Key Value[15:0] */
++	XRX200_PCE_TBL_KEY_1,          /* Table Key Data 1 */
++//	XRX200_PCE_TBL_KEY_1_KEY1,     /* Key Value[31:16] */
++	XRX200_PCE_TBL_KEY_0,          /* Table Key Data 0 */
++//	XRX200_PCE_TBL_KEY_0_KEY0,     /* Key Value[15:0] */
++	XRX200_PCE_TBL_MASK_0,         /* Table Mask Write Register0 */
++//	XRX200_PCE_TBL_MASK_0_MASK0,   /* Mask Pattern [15:0] */
++	XRX200_PCE_TBL_VAL_4,          /* Table Value Register4 */
++//	XRX200_PCE_TBL_VAL_4_VAL4,     /* Data value [15:0] */
++	XRX200_PCE_TBL_VAL_3,          /* Table Value Register3 */
++//	XRX200_PCE_TBL_VAL_3_VAL3,     /* Data value [15:0] */
++	XRX200_PCE_TBL_VAL_2,          /* Table Value Register2 */
++//	XRX200_PCE_TBL_VAL_2_VAL2,     /* Data value [15:0] */
++	XRX200_PCE_TBL_VAL_1,          /* Table Value Register1 */
++//	XRX200_PCE_TBL_VAL_1_VAL1,     /* Data value [15:0] */
++	XRX200_PCE_TBL_VAL_0,          /* Table Value Register0 */
++//	XRX200_PCE_TBL_VAL_0_VAL0,     /* Data value [15:0] */
++//	XRX200_PCE_TBL_ADDR,           /* Table Entry AddressRegister */
++	XRX200_PCE_TBL_ADDR_ADDR,      /* Table Address */
++//	XRX200_PCE_TBL_CTRL,           /* Table Access ControlRegister */
++	XRX200_PCE_TBL_CTRL_BAS,       /* Access Busy/Access Start */
++	XRX200_PCE_TBL_CTRL_TYPE,      /* Lookup Entry Type */
++	XRX200_PCE_TBL_CTRL_VLD,       /* Lookup Entry Valid */
++	XRX200_PCE_TBL_CTRL_GMAP,      /* Group Map */
++	XRX200_PCE_TBL_CTRL_OPMOD,     /* Lookup Table Access Operation Mode */
++	XRX200_PCE_TBL_CTRL_ADDR,      /* Lookup Table Address */
++//	XRX200_PCE_TBL_STAT,           /* Table General StatusRegister */
++//	XRX200_PCE_TBL_STAT_TBUSY,     /* Table Access Busy */
++//	XRX200_PCE_TBL_STAT_TEMPT,     /* Table Empty */
++//	XRX200_PCE_TBL_STAT_TFUL,      /* Table Full */
++//	XRX200_PCE_AGE_0,              /* Aging Counter ConfigurationRegister 0 */
++//	XRX200_PCE_AGE_0_EXP,          /* Aging Counter Exponent Value  */
++//	XRX200_PCE_AGE_1,              /* Aging Counter ConfigurationRegister 1 */
++//	XRX200_PCE_AGE_1_MANT,         /* Aging Counter Mantissa Value  */
++//	XRX200_PCE_PMAP_1,             /* Port Map Register 1 */
++//	XRX200_PCE_PMAP_1_MPMAP,       /* Monitoring Port Map */
++//	XRX200_PCE_PMAP_2,             /* Port Map Register 2 */
++//	XRX200_PCE_PMAP_2_DMCPMAP,     /* Default Multicast Port Map */
++//	XRX200_PCE_PMAP_3,             /* Port Map Register 3 */
++//	XRX200_PCE_PMAP_3_UUCMAP,      /* Default Unknown Unicast Port Map */
++//	XRX200_PCE_GCTRL_0,            /* PCE Global Control Register0 */
++//	XRX200_PCE_GCTRL_0_IGMP,       /* IGMP Mode Selection */
++	XRX200_PCE_GCTRL_0_VLAN,       /* VLAN-aware Switching */
++//	XRX200_PCE_GCTRL_0_NOPM,       /* No Port Map Forwarding */
++//	XRX200_PCE_GCTRL_0_SCONUC,     /* Unknown Unicast Storm Control */
++//	XRX200_PCE_GCTRL_0_SCONMC,     /* Multicast Storm Control */
++//	XRX200_PCE_GCTRL_0_SCONBC,     /* Broadcast Storm Control */
++//	XRX200_PCE_GCTRL_0_SCONMOD,    /* Storm Control Mode */
++//	XRX200_PCE_GCTRL_0_SCONMET,    /* Storm Control Metering Instance */
++//	XRX200_PCE_GCTRL_0_MC_VALID,   /* Access Request */
++//	XRX200_PCE_GCTRL_0_PLCKMOD,    /* Port Lock Mode */
++//	XRX200_PCE_GCTRL_0_PLIMMOD,    /* MAC Address Learning Limitation Mode */
++//	XRX200_PCE_GCTRL_0_MTFL,       /* MAC Table Flushing */
++//	XRX200_PCE_GCTRL_1,            /* PCE Global Control Register1 */
++//	XRX200_PCE_GCTRL_1_PCE_DIS,    /* PCE Disable after currently processed packet */
++//	XRX200_PCE_GCTRL_1_LRNMOD,     /* MAC Address Learning Mode */
++//	XRX200_PCE_TCM_GLOB_CTRL,      /* Three-color MarkerGlobal Control Register */
++//	XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */
++//	XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */
++//	XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */
++//	XRX200_PCE_IGMP_CTRL,          /* IGMP Control Register */
++//	XRX200_PCE_IGMP_CTRL_FAGEEN,   /* Force Aging of Table Entries Enable */
++//	XRX200_PCE_IGMP_CTRL_FLEAVE,   /* Fast Leave Enable */
++//	XRX200_PCE_IGMP_CTRL_DMRTEN,   /* Default Maximum Response Time Enable */
++//	XRX200_PCE_IGMP_CTRL_JASUP,    /* Join Aggregation Suppression Enable */
++//	XRX200_PCE_IGMP_CTRL_REPSUP,   /* Report Suppression Enable */
++//	XRX200_PCE_IGMP_CTRL_SRPEN,    /* Snooping of Router Port Enable */
++//	XRX200_PCE_IGMP_CTRL_ROB,      /* Robustness Variable */
++//	XRX200_PCE_IGMP_CTRL_DMRT,     /* IGMP Default Maximum Response Time */
++//	XRX200_PCE_IGMP_DRPM,          /* IGMP Default RouterPort Map Register */
++//	XRX200_PCE_IGMP_DRPM_DRPM,     /* IGMP Default Router Port Map */
++//	XRX200_PCE_IGMP_AGE_0,         /* IGMP Aging Register0 */
++//	XRX200_PCE_IGMP_AGE_0_MANT,    /* IGMP Group Aging Time Mantissa */
++//	XRX200_PCE_IGMP_AGE_0_EXP,     /* IGMP Group Aging Time Exponent */
++//	XRX200_PCE_IGMP_AGE_1,         /* IGMP Aging Register1 */
++//	XRX200_PCE_IGMP_AGE_1_MANT,    /* IGMP Router Port Aging Time Mantissa */
++//	XRX200_PCE_IGMP_STAT,          /* IGMP Status Register */
++//	XRX200_PCE_IGMP_STAT_IGPM,     /* IGMP Port Map */
++//	XRX200_WOL_GLB_CTRL,           /* Wake-on-LAN ControlRegister */
++//	XRX200_WOL_GLB_CTRL_PASSEN,    /* WoL Password Enable */
++//	XRX200_WOL_DA_0,               /* Wake-on-LAN DestinationAddress Register 0 */
++//	XRX200_WOL_DA_0_DA0,           /* WoL Destination Address [15:0] */
++//	XRX200_WOL_DA_1,               /* Wake-on-LAN DestinationAddress Register 1 */
++//	XRX200_WOL_DA_1_DA1,           /* WoL Destination Address [31:16] */
++//	XRX200_WOL_DA_2,               /* Wake-on-LAN DestinationAddress Register 2 */
++//	XRX200_WOL_DA_2_DA2,           /* WoL Destination Address [47:32] */
++//	XRX200_WOL_PW_0,               /* Wake-on-LAN Password Register0 */
++//	XRX200_WOL_PW_0_PW0,           /* WoL Password [15:0] */
++//	XRX200_WOL_PW_1,               /* Wake-on-LAN Password Register1 */
++//	XRX200_WOL_PW_1_PW1,           /* WoL Password [31:16] */
++//	XRX200_WOL_PW_2,               /* Wake-on-LAN Password Register2 */
++//	XRX200_WOL_PW_2_PW2,           /* WoL Password [47:32] */
++//	XRX200_PCE_IER_0_PINT,         /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */
++//	XRX200_PCE_IER_0_PINT_15,      /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_14,      /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_13,      /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_12,      /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_11,      /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_10,      /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_9,       /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_8,       /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_7,       /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_6,       /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_5,       /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_4,       /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_3,       /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_2,       /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_1,       /* Port Interrupt Enable */
++//	XRX200_PCE_IER_0_PINT_0,       /* Port Interrupt Enable */
++//	XRX200_PCE_IER_1,              /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */
++//	XRX200_PCE_IER_1_FLOWINT,      /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */
++//	XRX200_PCE_IER_1_CPH2,         /* Classification Phase 2 Ready Interrupt Enable */
++//	XRX200_PCE_IER_1_CPH1,         /* Classification Phase 1 Ready Interrupt Enable */
++//	XRX200_PCE_IER_1_CPH0,         /* Classification Phase 0 Ready Interrupt Enable */
++//	XRX200_PCE_IER_1_PRDY,         /* Parser Ready Interrupt Enable */
++//	XRX200_PCE_IER_1_IGTF,         /* IGMP Table Full Interrupt Enable */
++//	XRX200_PCE_IER_1_MTF,          /* MAC Table Full Interrupt Enable */
++//	XRX200_PCE_ISR_0_PINT,         /* Parser and ClassificationEngine Global Interrupt Status Register 0 */
++//	XRX200_PCE_ISR_0_PINT_15,      /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_14,      /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_13,      /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_12,      /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_11,      /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_10,      /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_9,       /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_8,       /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_7,       /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_6,       /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_5,       /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_4,       /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_3,       /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_2,       /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_1,       /* Port Interrupt */
++//	XRX200_PCE_ISR_0_PINT_0,       /* Port Interrupt */
++//	XRX200_PCE_ISR_1,              /* Parser and ClassificationEngine Global Interrupt Status Register 1 */
++//	XRX200_PCE_ISR_1_FLOWINT,      /* Traffic Flow Table Interrupt Rule matched */
++//	XRX200_PCE_ISR_1_CPH2,         /* Classification Phase 2 Ready Interrupt */
++//	XRX200_PCE_ISR_1_CPH1,         /* Classification Phase 1 Ready Interrupt */
++//	XRX200_PCE_ISR_1_CPH0,         /* Classification Phase 0 Ready Interrupt */
++//	XRX200_PCE_ISR_1_PRDY,         /* Parser Ready Interrupt */
++//	XRX200_PCE_ISR_1_IGTF,         /* IGMP Table Full Interrupt */
++//	XRX200_PCE_ISR_1_MTF,          /* MAC Table Full Interrupt */
++//	XRX200_PARSER_STAT_FIFO,       /* Parser Status Register */
++//	XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */
++//	XRX200_PARSER_STAT_FSM_STATE,  /* Parser FSM State */
++//	XRX200_PARSER_STAT_PKT_ERR,    /* Packet error detected */
++//	XRX200_PARSER_STAT_FSM_FIN,    /* Parser FSM finished */
++//	XRX200_PARSER_STAT_FSM_START,  /* Parser FSM start */
++//	XRX200_PARSER_STAT_FIFO_RDY,   /* Parser FIFO ready for read. */
++//	XRX200_PARSER_STAT_FIFO_FULL,  /* Parser */
++//	XRX200_PCE_PCTRL_0,            /* PCE Port ControlRegister 0 */
++//	XRX200_PCE_PCTRL_0_MCST,       /* Multicast Forwarding Mode Selection */
++//	XRX200_PCE_PCTRL_0_EGSTEN,     /* Table-based Egress Special Tag Enable */
++//	XRX200_PCE_PCTRL_0_IGSTEN,     /* Ingress Special Tag Enable */
++//	XRX200_PCE_PCTRL_0_PCPEN,      /* PCP Remarking Mode */
++//	XRX200_PCE_PCTRL_0_CLPEN,      /* Class Remarking Mode */
++//	XRX200_PCE_PCTRL_0_DPEN,       /* Drop Precedence Remarking Mode */
++//	XRX200_PCE_PCTRL_0_CMOD,       /* Three-color Marker Color Mode */
++//	XRX200_PCE_PCTRL_0_VREP,       /* VLAN Replacement Mode */
++	XRX200_PCE_PCTRL_0_TVM,        /* Transparent VLAN Mode */
++//	XRX200_PCE_PCTRL_0_PLOCK,      /* Port Locking Enable */
++//	XRX200_PCE_PCTRL_0_AGEDIS,     /* Aging Disable */
++//	XRX200_PCE_PCTRL_0_PSTATE,     /* Port State */
++//	XRX200_PCE_PCTRL_1,            /* PCE Port ControlRegister 1 */
++//	XRX200_PCE_PCTRL_1_LRNLIM,     /* MAC Address Learning Limit */
++//	XRX200_PCE_PCTRL_2,            /* PCE Port ControlRegister 2 */
++//	XRX200_PCE_PCTRL_2_DSCPMOD,    /* DSCP Mode Selection */
++//	XRX200_PCE_PCTRL_2_DSCP,       /* Enable DSCP to select the Class of Service */
++//	XRX200_PCE_PCTRL_2_PCP,        /* Enable VLAN PCP to select the Class of Service */
++//	XRX200_PCE_PCTRL_2_PCLASS,     /* Port-based Traffic Class */
++//	XRX200_PCE_PCTRL_3_VIO,        /* PCE Port ControlRegister 3 */
++//	XRX200_PCE_PCTRL_3_EDIR,       /* Egress Redirection Mode */
++//	XRX200_PCE_PCTRL_3_RXDMIR,     /* Receive Mirroring Enable for dropped frames */
++//	XRX200_PCE_PCTRL_3_RXVMIR,     /* Receive Mirroring Enable for valid frames */
++//	XRX200_PCE_PCTRL_3_TXMIR,      /* Transmit Mirroring Enable */
++//	XRX200_PCE_PCTRL_3_VIO_7,      /* Violation Type 7 Mirroring Enable */
++//	XRX200_PCE_PCTRL_3_VIO_6,      /* Violation Type 6 Mirroring Enable */
++//	XRX200_PCE_PCTRL_3_VIO_5,      /* Violation Type 5 Mirroring Enable */
++//	XRX200_PCE_PCTRL_3_VIO_4,      /* Violation Type 4 Mirroring Enable */
++//	XRX200_PCE_PCTRL_3_VIO_3,      /* Violation Type 3 Mirroring Enable */
++//	XRX200_PCE_PCTRL_3_VIO_2,      /* Violation Type 2 Mirroring Enable */
++//	XRX200_PCE_PCTRL_3_VIO_1,      /* Violation Type 1 Mirroring Enable */
++//	XRX200_PCE_PCTRL_3_VIO_0,      /* Violation Type 0 Mirroring Enable */
++//	XRX200_WOL_CTRL,               /* Wake-on-LAN ControlRegister */
++//	XRX200_WOL_CTRL_PORT,          /* WoL Enable */
++//	XRX200_PCE_VCTRL,              /* PCE VLAN ControlRegister */
++	XRX200_PCE_VCTRL_VSR,          /* VLAN Security Rule */
++	XRX200_PCE_VCTRL_VEMR,         /* VLAN Egress Member Violation Rule */
++	XRX200_PCE_VCTRL_VIMR,         /* VLAN Ingress Member Violation Rule */
++	XRX200_PCE_VCTRL_VINR,         /* VLAN Ingress Tag Rule */
++	XRX200_PCE_VCTRL_UVR,          /* Unknown VLAN Rule */
++//	XRX200_PCE_DEFPVID,            /* PCE Default PortVID Register */
++	XRX200_PCE_DEFPVID_PVID,       /* Default Port VID Index */
++//	XRX200_PCE_PSTAT,              /* PCE Port StatusRegister */
++//	XRX200_PCE_PSTAT_LRNCNT,       /* Learning Count */
++//	XRX200_PCE_PIER,               /* Parser and ClassificationEngine Port Interrupt Enable Register */
++//	XRX200_PCE_PIER_CLDRP,         /* Classification Drop Interrupt Enable */
++//	XRX200_PCE_PIER_PTDRP,         /* Port Drop Interrupt Enable */
++//	XRX200_PCE_PIER_VLAN,          /* VLAN Violation Interrupt Enable */
++//	XRX200_PCE_PIER_WOL,           /* Wake-on-LAN Interrupt Enable */
++//	XRX200_PCE_PIER_LOCK,          /* Port Limit Alert Interrupt Enable */
++//	XRX200_PCE_PIER_LIM,           /* Port Lock Alert Interrupt Enable */
++//	XRX200_PCE_PISR,               /* Parser and ClassificationEngine Port Interrupt Status Register */
++//	XRX200_PCE_PISR_CLDRP,         /* Classification Drop Interrupt */
++//	XRX200_PCE_PISR_PTDRP,         /* Port Drop Interrupt */
++//	XRX200_PCE_PISR_VLAN,          /* VLAN Violation Interrupt */
++//	XRX200_PCE_PISR_WOL,           /* Wake-on-LAN Interrupt */
++//	XRX200_PCE_PISR_LOCK,          /* Port Lock Alert Interrupt */
++//	XRX200_PCE_PISR_LIMIT,         /* Port Limitation Alert Interrupt */
++//	XRX200_PCE_TCM_CTRL,           /* Three-colorMarker Control Register */
++//	XRX200_PCE_TCM_CTRL_TCMEN,     /* Three-color Marker metering instance enable */
++//	XRX200_PCE_TCM_STAT,           /* Three-colorMarker Status Register */
++//	XRX200_PCE_TCM_STAT_AL1,       /* Three-color Marker Alert 1 Status */
++//	XRX200_PCE_TCM_STAT_AL0,       /* Three-color Marker Alert 0 Status */
++//	XRX200_PCE_TCM_CBS,            /* Three-color MarkerCommitted Burst Size Register */
++//	XRX200_PCE_TCM_CBS_CBS,        /* Committed Burst Size */
++//	XRX200_PCE_TCM_EBS,            /* Three-color MarkerExcess Burst Size Register */
++//	XRX200_PCE_TCM_EBS_EBS,        /* Excess Burst Size */
++//	XRX200_PCE_TCM_IBS,            /* Three-color MarkerInstantaneous Burst Size Register */
++//	XRX200_PCE_TCM_IBS_IBS,        /* Instantaneous Burst Size */
++//	XRX200_PCE_TCM_CIR_MANT,       /* Three-colorMarker Constant Information Rate Mantissa Register */
++//	XRX200_PCE_TCM_CIR_MANT_MANT,  /* Rate Counter Mantissa */
++//	XRX200_PCE_TCM_CIR_EXP,        /* Three-colorMarker Constant Information Rate Exponent Register */
++//	XRX200_PCE_TCM_CIR_EXP_EXP,    /* Rate Counter Exponent */
++//	XRX200_MAC_TEST,               /* MAC Test Register */
++//	XRX200_MAC_TEST_JTP,           /* Jitter Test Pattern */
++//	XRX200_MAC_PFAD_CFG,           /* MAC Pause FrameSource Address Configuration Register */
++//	XRX200_MAC_PFAD_CFG_SAMOD,     /* Source Address Mode */
++//	XRX200_MAC_PFSA_0,             /* Pause Frame SourceAddress Part 0  */
++//	XRX200_MAC_PFSA_0_PFAD,        /* Pause Frame Source Address Part 0 */
++//	XRX200_MAC_PFSA_1,             /* Pause Frame SourceAddress Part 1  */
++//	XRX200_MAC_PFSA_1_PFAD,        /* Pause Frame Source Address Part 1 */
++//	XRX200_MAC_PFSA_2,             /* Pause Frame SourceAddress Part 2  */
++//	XRX200_MAC_PFSA_2_PFAD,        /* Pause Frame Source Address Part 2 */
++//	XRX200_MAC_FLEN,               /* MAC Frame Length Register */
++//	XRX200_MAC_FLEN_LEN,           /* Maximum Frame Length */
++//	XRX200_MAC_VLAN_ETYPE_0,       /* MAC VLAN EthertypeRegister 0 */
++//	XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */
++//	XRX200_MAC_VLAN_ETYPE_1,       /* MAC VLAN EthertypeRegister 1 */
++//	XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */
++//	XRX200_MAC_IER,                /* MAC Interrupt EnableRegister */
++//	XRX200_MAC_IER_MACIEN,         /* MAC Interrupt Enable */
++//	XRX200_MAC_ISR,                /* MAC Interrupt StatusRegister */
++//	XRX200_MAC_ISR_MACINT,         /* MAC Interrupt */
++//	XRX200_MAC_PSTAT,              /* MAC Port Status Register */
++//	XRX200_MAC_PSTAT_PACT,         /* PHY Active Status */
++	XRX200_MAC_PSTAT_GBIT,         /* Gigabit Speed Status */
++	XRX200_MAC_PSTAT_MBIT,         /* Megabit Speed Status */
++	XRX200_MAC_PSTAT_FDUP,         /* Full Duplex Status */
++//	XRX200_MAC_PSTAT_RXPAU,        /* Receive Pause Status */
++//	XRX200_MAC_PSTAT_TXPAU,        /* Transmit Pause Status */
++//	XRX200_MAC_PSTAT_RXPAUEN,      /* Receive Pause Enable Status */
++//	XRX200_MAC_PSTAT_TXPAUEN,      /* Transmit Pause Enable Status */
++	XRX200_MAC_PSTAT_LSTAT,        /* Link Status */
++//	XRX200_MAC_PSTAT_CRS,          /* Carrier Sense Status */
++//	XRX200_MAC_PSTAT_TXLPI,        /* Transmit Low-power Idle Status */
++//	XRX200_MAC_PSTAT_RXLPI,        /* Receive Low-power Idle Status */
++//	XRX200_MAC_PISR,               /* MAC Interrupt Status Register */
++//	XRX200_MAC_PISR_PACT,          /* PHY Active Status */
++//	XRX200_MAC_PISR_SPEED,         /* Megabit Speed Status */
++//	XRX200_MAC_PISR_FDUP,          /* Full Duplex Status */
++//	XRX200_MAC_PISR_RXPAUEN,       /* Receive Pause Enable Status */
++//	XRX200_MAC_PISR_TXPAUEN,       /* Transmit Pause Enable Status */
++//	XRX200_MAC_PISR_LPIOFF,        /* Receive Low-power Idle Mode is left */
++//	XRX200_MAC_PISR_LPION,         /* Receive Low-power Idle Mode is entered */
++//	XRX200_MAC_PISR_JAM,           /* Jam Status Detected */
++//	XRX200_MAC_PISR_TOOSHORT,      /* Too Short Frame Error Detected */
++//	XRX200_MAC_PISR_TOOLONG,       /* Too Long Frame Error Detected */
++//	XRX200_MAC_PISR_LENERR,        /* Length Mismatch Error Detected */
++//	XRX200_MAC_PISR_FCSERR,        /* Frame Checksum Error Detected */
++//	XRX200_MAC_PISR_TXPAUSE,       /* Pause Frame Transmitted */
++//	XRX200_MAC_PISR_RXPAUSE,       /* Pause Frame Received */
++//	XRX200_MAC_PIER,               /* MAC Interrupt Enable Register */
++//	XRX200_MAC_PIER_PACT,          /* PHY Active Status */
++//	XRX200_MAC_PIER_SPEED,         /* Megabit Speed Status */
++//	XRX200_MAC_PIER_FDUP,          /* Full Duplex Status */
++//	XRX200_MAC_PIER_RXPAUEN,       /* Receive Pause Enable Status */
++//	XRX200_MAC_PIER_TXPAUEN,       /* Transmit Pause Enable Status */
++//	XRX200_MAC_PIER_LPIOFF,        /* Low-power Idle Off Interrupt Mask */
++//	XRX200_MAC_PIER_LPION,         /* Low-power Idle On Interrupt Mask */
++//	XRX200_MAC_PIER_JAM,           /* Jam Status Interrupt Mask */
++//	XRX200_MAC_PIER_TOOSHORT,      /* Too Short Frame Error Interrupt Mask */
++//	XRX200_MAC_PIER_TOOLONG,       /* Too Long Frame Error Interrupt Mask */
++//	XRX200_MAC_PIER_LENERR,        /* Length Mismatch Error Interrupt Mask */
++//	XRX200_MAC_PIER_FCSERR,        /* Frame Checksum Error Interrupt Mask */
++//	XRX200_MAC_PIER_TXPAUSE,       /* Transmit Pause Frame Interrupt Mask */
++//	XRX200_MAC_PIER_RXPAUSE,       /* Receive Pause Frame Interrupt Mask */
++//	XRX200_MAC_CTRL_0,             /* MAC Control Register0 */
++//	XRX200_MAC_CTRL_0_LCOL,        /* Late Collision Control */
++//	XRX200_MAC_CTRL_0_BM,          /* Burst Mode Control */
++//	XRX200_MAC_CTRL_0_APADEN,      /* Automatic VLAN Padding Enable */
++//	XRX200_MAC_CTRL_0_VPAD2EN,     /* Stacked VLAN Padding Enable */
++//	XRX200_MAC_CTRL_0_VPADEN,      /* VLAN Padding Enable */
++//	XRX200_MAC_CTRL_0_PADEN,       /* Padding Enable */
++//	XRX200_MAC_CTRL_0_FCS,         /* Transmit FCS Control */
++	XRX200_MAC_CTRL_0_FCON,        /* Flow Control Mode */
++//	XRX200_MAC_CTRL_0_FDUP,        /* Full Duplex Control */
++//	XRX200_MAC_CTRL_0_GMII,        /* GMII/MII interface mode selection */
++//	XRX200_MAC_CTRL_1,             /* MAC Control Register1 */
++//	XRX200_MAC_CTRL_1_SHORTPRE,    /* Short Preamble Control */
++//	XRX200_MAC_CTRL_1_IPG,         /* Minimum Inter Packet Gap Size */
++//	XRX200_MAC_CTRL_2,             /* MAC Control Register2 */
++//	XRX200_MAC_CTRL_2_MLEN,        /* Maximum Untagged Frame Length */
++//	XRX200_MAC_CTRL_2_LCHKL,       /* Frame Length Check Long Enable */
++//	XRX200_MAC_CTRL_2_LCHKS,       /* Frame Length Check Short Enable */
++//	XRX200_MAC_CTRL_3,             /* MAC Control Register3 */
++//	XRX200_MAC_CTRL_3_RCNT,        /* Retry Count */
++//	XRX200_MAC_CTRL_4,             /* MAC Control Register4 */
++//	XRX200_MAC_CTRL_4_LPIEN,       /* LPI Mode Enable */
++//	XRX200_MAC_CTRL_4_WAIT,        /* LPI Wait Time */
++//	XRX200_MAC_CTRL_5_PJPS,        /* MAC Control Register5 */
++//	XRX200_MAC_CTRL_5_PJPS_NOBP,   /* Prolonged Jam pattern size during no-backpressure state */
++//	XRX200_MAC_CTRL_5_PJPS_BP,     /* Prolonged Jam pattern size during backpressure state */
++//	XRX200_MAC_CTRL_6_XBUF,        /* Transmit and ReceiveBuffer Control Register */
++//	XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */
++//	XRX200_MAC_CTRL_6_RBUF_INIT,   /* Receive Buffer Initialization */
++//	XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */
++//	XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */
++//	XRX200_MAC_CTRL_6_XBUF_INIT,   /* Initialize the Transmit Buffer */
++//	XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */
++//	XRX200_MAC_BUFST_XBUF,         /* MAC Receive and TransmitBuffer Status Register */
++//	XRX200_MAC_BUFST_RBUF_UFL,     /* Receive Buffer Underflow Indicator */
++//	XRX200_MAC_BUFST_RBUF_OFL,     /* Receive Buffer Overflow Indicator */
++//	XRX200_MAC_BUFST_XBUF_UFL,     /* Transmit Buffer Underflow Indicator */
++//	XRX200_MAC_BUFST_XBUF_OFL,     /* Transmit Buffer Overflow Indicator */
++//	XRX200_MAC_TESTEN,             /* MAC Test Enable Register */
++//	XRX200_MAC_TESTEN_JTEN,        /* Jitter Test Enable */
++//	XRX200_MAC_TESTEN_TXER,        /* Transmit Error Insertion */
++//	XRX200_MAC_TESTEN_LOOP,        /* MAC Loopback Enable */
++//	XRX200_FDMA_CTRL,              /* Ethernet Switch FetchDMA Control Register */
++//	XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */
++//	XRX200_FDMA_CTRL_LPI_MODE,     /* Low Power Idle Mode */
++//	XRX200_FDMA_CTRL_EGSTAG,       /* Egress Special Tag Size */
++//	XRX200_FDMA_CTRL_IGSTAG,       /* Ingress Special Tag Size */
++//	XRX200_FDMA_CTRL_EXCOL,        /* Excessive Collision Handling */
++//	XRX200_FDMA_STETYPE,           /* Special Tag EthertypeControl Register */
++//	XRX200_FDMA_STETYPE_ETYPE,     /* Special Tag Ethertype */
++//	XRX200_FDMA_VTETYPE,           /* VLAN Tag EthertypeControl Register */
++//	XRX200_FDMA_VTETYPE_ETYPE,     /* VLAN Tag Ethertype */
++//	XRX200_FDMA_STAT_0,            /* FDMA Status Register0 */
++//	XRX200_FDMA_STAT_0_FSMS,       /* FSM states status */
++//	XRX200_FDMA_IER,               /* Fetch DMA Global InterruptEnable Register */
++//	XRX200_FDMA_IER_PCKD,          /* Packet Drop Interrupt Enable */
++//	XRX200_FDMA_IER_PCKR,          /* Packet Ready Interrupt Enable */
++//	XRX200_FDMA_IER_PCKT,          /* Packet Sent Interrupt Enable */
++//	XRX200_FDMA_ISR,               /* Fetch DMA Global InterruptStatus Register */
++//	XRX200_FDMA_ISR_PCKTD,         /* Packet Drop */
++//	XRX200_FDMA_ISR_PCKR,          /* Packet is Ready for Transmission */
++//	XRX200_FDMA_ISR_PCKT,          /* Packet Sent Event */
++//	XRX200_FDMA_PCTRL,             /* Ethernet SwitchFetch DMA Port Control Register */
++//	XRX200_FDMA_PCTRL_VLANMOD,     /* VLAN Modification Enable */
++//	XRX200_FDMA_PCTRL_DSCPRM,      /* DSCP Re-marking Enable */
++//	XRX200_FDMA_PCTRL_STEN,        /* Special Tag Insertion Enable */
++//	XRX200_FDMA_PCTRL_EN,          /* FDMA Port Enable */
++//	XRX200_FDMA_PRIO,              /* Ethernet SwitchFetch DMA Port Priority Register */
++//	XRX200_FDMA_PRIO_PRIO,         /* FDMA PRIO */
++//	XRX200_FDMA_PSTAT0,            /* Ethernet SwitchFetch DMA Port Status Register 0 */
++//	XRX200_FDMA_PSTAT0_PKT_AVAIL,  /* Port Egress Packet Available */
++//	XRX200_FDMA_PSTAT0_POK,        /* Port Status OK */
++//	XRX200_FDMA_PSTAT0_PSEG,       /* Port Egress Segment Count */
++//	XRX200_FDMA_PSTAT1_HDR,        /* Ethernet SwitchFetch DMA Port Status Register 1 */
++//	XRX200_FDMA_PSTAT1_HDR_PTR,    /* Header Pointer */
++//	XRX200_FDMA_TSTAMP0,           /* Egress TimeStamp Register 0 */
++//	XRX200_FDMA_TSTAMP0_TSTL,      /* Time Stamp [15:0] */
++//	XRX200_FDMA_TSTAMP1,           /* Egress TimeStamp Register 1 */
++//	XRX200_FDMA_TSTAMP1_TSTH,      /* Time Stamp [31:16] */
++//	XRX200_SDMA_CTRL,              /* Ethernet Switch StoreDMA Control Register */
++//	XRX200_SDMA_CTRL_TSTEN,        /* Time Stamp Enable */
++//	XRX200_SDMA_FCTHR1,            /* SDMA Flow Control Threshold1 Register */
++//	XRX200_SDMA_FCTHR1_THR1,       /* Threshold 1 */
++//	XRX200_SDMA_FCTHR2,            /* SDMA Flow Control Threshold2 Register */
++//	XRX200_SDMA_FCTHR2_THR2,       /* Threshold 2 */
++//	XRX200_SDMA_FCTHR3,            /* SDMA Flow Control Threshold3 Register */
++//	XRX200_SDMA_FCTHR3_THR3,       /* Threshold 3 */
++//	XRX200_SDMA_FCTHR4,            /* SDMA Flow Control Threshold4 Register */
++//	XRX200_SDMA_FCTHR4_THR4,       /* Threshold 4 */
++//	XRX200_SDMA_FCTHR5,            /* SDMA Flow Control Threshold5 Register */
++//	XRX200_SDMA_FCTHR5_THR5,       /* Threshold 5 */
++//	XRX200_SDMA_FCTHR6,            /* SDMA Flow Control Threshold6 Register */
++//	XRX200_SDMA_FCTHR6_THR6,       /* Threshold 6 */
++//	XRX200_SDMA_FCTHR7,            /* SDMA Flow Control Threshold7 Register */
++//	XRX200_SDMA_FCTHR7_THR7,       /* Threshold 7 */
++//	XRX200_SDMA_STAT_0,            /* SDMA Status Register0 */
++//	XRX200_SDMA_STAT_0_BPS_FILL,   /* Back Pressure Status */
++//	XRX200_SDMA_STAT_0_BPS_PNT,    /* Back Pressure Status */
++//	XRX200_SDMA_STAT_0_DROP,       /* Back Pressure Status */
++//	XRX200_SDMA_STAT_1,            /* SDMA Status Register1 */
++//	XRX200_SDMA_STAT_1_FILL,       /* Buffer Filling Level */
++//	XRX200_SDMA_STAT_2,            /* SDMA Status Register2 */
++//	XRX200_SDMA_STAT_2_FSMS,       /* FSM states status */
++//	XRX200_SDMA_IER,               /* SDMA Interrupt Enable Register */
++//	XRX200_SDMA_IER_BPEX,          /* Buffer Pointers Exceeded */
++//	XRX200_SDMA_IER_BFULL,         /* Buffer Full */
++//	XRX200_SDMA_IER_FERR,          /* Frame Error */
++//	XRX200_SDMA_IER_FRX,           /* Frame Received Successfully */
++//	XRX200_SDMA_ISR,               /* SDMA Interrupt Status Register */
++//	XRX200_SDMA_ISR_BPEX,          /* Packet Descriptors Exceeded */
++//	XRX200_SDMA_ISR_BFULL,         /* Buffer Full */
++//	XRX200_SDMA_ISR_FERR,          /* Frame Error */
++//	XRX200_SDMA_ISR_FRX,           /* Frame Received Successfully */
++//	XRX200_SDMA_PCTRL,             /* Ethernet SwitchStore DMA Port Control Register */
++//	XRX200_SDMA_PCTRL_DTHR,        /* Drop Threshold Selection */
++//	XRX200_SDMA_PCTRL_PTHR,        /* Pause Threshold Selection */
++//	XRX200_SDMA_PCTRL_PHYEFWD,     /* Forward PHY Error Frames */
++//	XRX200_SDMA_PCTRL_ALGFWD,      /* Forward Alignment Error Frames */
++//	XRX200_SDMA_PCTRL_LENFWD,      /* Forward Length Errored Frames */
++//	XRX200_SDMA_PCTRL_OSFWD,       /* Forward Oversized Frames */
++//	XRX200_SDMA_PCTRL_USFWD,       /* Forward Undersized Frames */
++//	XRX200_SDMA_PCTRL_FCSIGN,      /* Ignore FCS Errors */
++//	XRX200_SDMA_PCTRL_FCSFWD,      /* Forward FCS Errored Frames */
++//	XRX200_SDMA_PCTRL_PAUFWD,      /* Pause Frame Forwarding */
++//	XRX200_SDMA_PCTRL_MFCEN,       /* Metering Flow Control Enable */
++//	XRX200_SDMA_PCTRL_FCEN,        /* Flow Control Enable */
++//	XRX200_SDMA_PCTRL_PEN,         /* Port Enable */
++//	XRX200_SDMA_PRIO,              /* Ethernet SwitchStore DMA Port Priority Register */
++//	XRX200_SDMA_PRIO_PRIO,         /* SDMA PRIO */
++//	XRX200_SDMA_PSTAT0_HDR,        /* Ethernet SwitchStore DMA Port Status Register 0 */
++//	XRX200_SDMA_PSTAT0_HDR_PTR,    /* Port Ingress Queue Header Pointer */
++//	XRX200_SDMA_PSTAT1,            /* Ethernet SwitchStore DMA Port Status Register 1 */
++//	XRX200_SDMA_PSTAT1_PPKT,       /* Port Ingress Packet Count */
++//	XRX200_SDMA_TSTAMP0,           /* Ingress TimeStamp Register 0 */
++//	XRX200_SDMA_TSTAMP0_TSTL,      /* Time Stamp [15:0] */
++//	XRX200_SDMA_TSTAMP1,           /* Ingress TimeStamp Register 1 */
++//	XRX200_SDMA_TSTAMP1_TSTH,      /* Time Stamp [31:16] */
++};
++
++
++struct xrx200sw_reg {
++	int offset;
++	int shift;
++	int size;
++	int mult;
++} xrx200sw_reg[] = {
++//	offeset	     shift    size	mult
++//	{0x0000,	 0,	16,	0x00}, /* XRX200_ETHSW_SWRES             Ethernet Switch ResetControl Register */
++//	{0x0000,	 1,	 1,	0x00}, /* XRX200_ETHSW_SWRES_R1          Hardware Reset */
++//	{0x0000,	 0,	 1,	0x00}, /* XRX200_ETHSW_SWRES_R0          Register Configuration */
++//	{0x0004,	 0,	16,	0x00}, /* XRX200_ETHSW_CLK_MAC_GAT       Ethernet Switch Clock ControlRegister  */
++//	{0x0004,	12,	 4,	0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP     Exponent to put system into sleep */
++//	{0x0004,	 8,	 4,	0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE      Exponent to wake up system */
++//	{0x0004,	 7,	 1,	0x00}, /* XRX200_ETHSW_CLK_CLK2_EN       CLK2 Input for MAC */
++//	{0x0004,	 6,	 1,	0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN    External Clock Divider Enable */
++//	{0x0004,	 5,	 1,	0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN    Clock Gating Enable */
++//	{0x0004,	 4,	 1,	0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN    Clock Gating Enable */
++//	{0x0004,	 3,	 1,	0x00}, /* XRX200_ETHSW_CLK_GAT_EN        Clock Gating Enable */
++//	{0x0004,	 2,	 1,	0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN    Clock Gating Enable */
++//	{0x0008,	 0,	16,	0x00}, /* XRX200_ETHSW_DBG_STEP          Ethernet Switch Debug ControlRegister */
++//	{0x0008,	12,	 4,	0x00}, /* XRX200_ETHSW_DBG_CLK_SEL       Trigger Enable */
++//	{0x0008,	11,	 1,	0x00}, /* XRX200_ETHSW_DBG_MON_EN        Monitoring Enable */
++//	{0x0008,	 9,	 2,	0x00}, /* XRX200_ETHSW_DBG_TRIG_EN       Trigger Enable */
++//	{0x0008,	 8,	 1,	0x00}, /* XRX200_ETHSW_DBG_MODE          Debug Mode */
++//	{0x0008,	 0,	 8,	0x00}, /* XRX200_ETHSW_DBG_STEP_TIME     Clock Step Size */
++//	{0x000C,	 0,	16,	0x00}, /* XRX200_ETHSW_SSB_MODE          Ethernet Switch SharedSegment Buffer Mode Register */
++//	{0x000C,	 2,	 4,	0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE     Memory Address */
++//	{0x000C,	 0,	 2,	0x00}, /* XRX200_ETHSW_SSB_MODE_MODE     Memory Access Mode */
++//	{0x0010,	 0,	16,	0x00}, /* XRX200_ETHSW_SSB_ADDR          Ethernet Switch SharedSegment Buffer Address Register */
++//	{0x0010,	 0,	16,	0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE     Memory Address */
++//	{0x0014,	 0,	16,	0x00}, /* XRX200_ETHSW_SSB_DATA          Ethernet Switch SharedSegment Buffer Data Register */
++//	{0x0014,	 0,	16,	0x00}, /* XRX200_ETHSW_SSB_DATA_DATA     Data Value */
++//	{0x0018,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_0             Ethernet Switch CapabilityRegister 0 */
++//	{0x0018,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_0_SPEED       Clock frequency */
++//	{0x001C,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_1             Ethernet Switch CapabilityRegister 1 */
++//	{0x001C,	15,	 1,	0x00}, /* XRX200_ETHSW_CAP_1_GMAC        MAC operation mode */
++//	{0x001C,	 8,	 7,	0x00}, /* XRX200_ETHSW_CAP_1_QUEUE       Number of queues */
++//	{0x001C,	 4,	 4,	0x00}, /* XRX200_ETHSW_CAP_1_VPORTS      Number of virtual ports */
++//	{0x001C,	 0,	 4,	0x00}, /* XRX200_ETHSW_CAP_1_PPORTS      Number of physical ports */
++//	{0x0020,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_2             Ethernet Switch CapabilityRegister 2 */
++//	{0x0020,	 0,	11,	0x00}, /* XRX200_ETHSW_CAP_2_PACKETS     Number of packets */
++//	{0x0024,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_3             Ethernet Switch CapabilityRegister 3 */
++//	{0x0024,	 8,	 8,	0x00}, /* XRX200_ETHSW_CAP_3_METERS      Number of traffic meters */
++//	{0x0024,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS     Number of traffic shapers */
++//	{0x0028,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_4             Ethernet Switch CapabilityRegister 4 */
++//	{0x0028,	 8,	 8,	0x00}, /* XRX200_ETHSW_CAP_4_PPPOE       PPPoE table size */
++//	{0x0028,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_4_VLAN        Active VLAN table size */
++//	{0x002C,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_5             Ethernet Switch CapabilityRegister 5 */
++//	{0x002C,	 8,	 8,	0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN      IP packet length table size */
++//	{0x002C,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_5_PROT        Protocol table size */
++//	{0x0030,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_6             Ethernet Switch CapabilityRegister 6 */
++//	{0x0030,	 8,	 8,	0x00}, /* XRX200_ETHSW_CAP_6_MACDASA     MAC DA/SA table size */
++//	{0x0030,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_6_APPL        Application table size */
++//	{0x0034,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_7             Ethernet Switch CapabilityRegister 7 */
++//	{0x0034,	 8,	 8,	0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM     IP DA/SA MSB table size */
++//	{0x0034,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL     IP DA/SA LSB table size */
++//	{0x0038,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_8             Ethernet Switch CapabilityRegister 8 */
++//	{0x0038,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_8_MCAST       Multicast table size */
++//	{0x003C,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_9             Ethernet Switch CapabilityRegister 9 */
++//	{0x003C,	 0,	 8,	0x00}, /* XRX200_ETHSW_CAP_9_FLAGG       Flow Aggregation table size */
++//	{0x0040,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_10            Ethernet Switch CapabilityRegister 10 */
++//	{0x0040,	 0,	13,	0x00}, /* XRX200_ETHSW_CAP_10_MACBT      MAC bridging table size */
++//	{0x0044,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_11            Ethernet Switch CapabilityRegister 11 */
++//	{0x0044,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL     Packet buffer size (lower part, in byte) */
++//	{0x0048,	 0,	16,	0x00}, /* XRX200_ETHSW_CAP_12            Ethernet Switch CapabilityRegister 12 */
++//	{0x0048,	 0,	 3,	0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH     Packet buffer size (higher part, in byte) */
++//	{0x004C,	 0,	16,	0x00}, /* XRX200_ETHSW_VERSION_REV       Ethernet Switch VersionRegister */
++//	{0x004C,	 8,	 8,	0x00}, /* XRX200_ETHSW_VERSION_MOD_ID    Module Identification */
++//	{0x004C,	 0,	 8,	0x00}, /* XRX200_ETHSW_VERSION_REV_ID    Hardware Revision Identification */
++//	{0x0050,	 0,	16,	0x00}, /* XRX200_ETHSW_IER               Interrupt Enable Register */
++//	{0x0050,	 4,	 1,	0x00}, /* XRX200_ETHSW_IER_FDMAIE        Fetch DMA Interrupt Enable */
++//	{0x0050,	 3,	 1,	0x00}, /* XRX200_ETHSW_IER_SDMAIE        Store DMA Interrupt Enable */
++//	{0x0050,	 2,	 1,	0x00}, /* XRX200_ETHSW_IER_MACIE         Ethernet MAC Interrupt Enable */
++//	{0x0050,	 1,	 1,	0x00}, /* XRX200_ETHSW_IER_PCEIE         Parser and Classification Engine Interrupt Enable */
++//	{0x0050,	 0,	 1,	0x00}, /* XRX200_ETHSW_IER_BMIE          Buffer Manager Interrupt Enable */
++//	{0x0054,	 0,	16,	0x00}, /* XRX200_ETHSW_ISR               Interrupt Status Register */
++//	{0x0054,	 4,	 1,	0x00}, /* XRX200_ETHSW_ISR_FDMAINT       Fetch DMA Interrupt */
++//	{0x0054,	 3,	 1,	0x00}, /* XRX200_ETHSW_ISR_SDMAINT       Store DMA Interrupt */
++//	{0x0054,	 2,	 1,	0x00}, /* XRX200_ETHSW_ISR_MACINT        Ethernet MAC Interrupt */
++//	{0x0054,	 1,	 1,	0x00}, /* XRX200_ETHSW_ISR_PCEINT        Parser and Classification Engine Interrupt */
++//	{0x0054,	 0,	 1,	0x00}, /* XRX200_ETHSW_ISR_BMINT         Buffer Manager Interrupt */
++//	{0x0058,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_0           Ethernet Switch SpareCells 0 */
++//	{0x0058,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_0_SPARE     SPARE0  */
++//	{0x005C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_1           Ethernet Switch SpareCells 1 */
++//	{0x005C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_1_SPARE     SPARE1  */
++//	{0x0060,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_2           Ethernet Switch SpareCells 2 */
++//	{0x0060,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_2_SPARE     SPARE2  */
++//	{0x0064,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_3           Ethernet Switch SpareCells 3 */
++//	{0x0064,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_3_SPARE     SPARE3  */
++//	{0x0068,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_4           Ethernet Switch SpareCells 4 */
++//	{0x0068,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_4_SPARE     SPARE4  */
++//	{0x006C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_5           Ethernet Switch SpareCells 5 */
++//	{0x006C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_5_SPARE     SPARE5  */
++//	{0x0070,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_6           Ethernet Switch SpareCells 6 */
++//	{0x0070,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_6_SPARE     SPARE6  */
++//	{0x0074,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_7           Ethernet Switch SpareCells 7 */
++//	{0x0074,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_7_SPARE     SPARE7  */
++//	{0x0078,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_8           Ethernet Switch SpareCells 8 */
++//	{0x0078,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_8_SPARE     SPARE8  */
++//	{0x007C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_9           Ethernet Switch SpareCells 9 */
++//	{0x007C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_9_SPARE     SPARE9  */
++//	{0x0080,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_10          Ethernet Switch SpareCells 10 */
++//	{0x0080,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_10_SPARE    SPARE10  */
++//	{0x0084,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_11          Ethernet Switch SpareCells 11 */
++//	{0x0084,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_11_SPARE    SPARE11  */
++//	{0x0088,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_12          Ethernet Switch SpareCells 12 */
++//	{0x0088,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_12_SPARE    SPARE12  */
++//	{0x008C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_13          Ethernet Switch SpareCells 13 */
++//	{0x008C,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_13_SPARE    SPARE13  */
++//	{0x0090,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_14          Ethernet Switch SpareCells 14 */
++//	{0x0090,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_14_SPARE    SPARE14  */
++//	{0x0094,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_15          Ethernet Switch SpareCells 15 */
++//	{0x0094,	 0,	16,	0x00}, /* XRX200_ETHSW_SPARE_15_SPARE    SPARE15  */
++//	{0x0100,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_3            RAM Value Register 3 */
++//	{0x0100,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_3_VAL3       Data value [15:0] */
++//	{0x0104,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_2            RAM Value Register 2 */
++//	{0x0104,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_2_VAL2       Data value [15:0] */
++//	{0x0108,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_1            RAM Value Register 1 */
++//	{0x0108,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_1_VAL1       Data value [15:0] */
++//	{0x010C,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_0            RAM Value Register 0 */
++//	{0x010C,	 0,	16,	0x00}, /* XRX200_BM_RAM_VAL_0_VAL0       Data value [15:0] */
++//	{0x0110,	 0,	16,	0x00}, /* XRX200_BM_RAM_ADDR             RAM Address Register */
++//	{0x0110,	 0,	11,	0x00}, /* XRX200_BM_RAM_ADDR_ADDR        RAM Address */
++//	{0x0114,	 0,	16,	0x00}, /* XRX200_BM_RAM_CTRL             RAM Access Control Register */
++//	{0x0114,	15,	 1,	0x00}, /* XRX200_BM_RAM_CTRL_BAS         Access Busy/Access Start */
++//	{0x0114,	 5,	 1,	0x00}, /* XRX200_BM_RAM_CTRL_OPMOD       Lookup Table Access Operation Mode */
++//	{0x0114,	 0,	 5,	0x00}, /* XRX200_BM_RAM_CTRL_ADDR        Address for RAM selection */
++//	{0x0118,	 0,	16,	0x00}, /* XRX200_BM_FSQM_GCTRL           Free Segment Queue ManagerGlobal Control Register */
++//	{0x0118,	 0,	10,	0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM    Maximum Segment Number */
++//	{0x011C,	 0,	16,	0x00}, /* XRX200_BM_CONS_SEG             Number of Consumed SegmentsRegister */
++//	{0x011C,	 0,	10,	0x00}, /* XRX200_BM_CONS_SEG_FSEG        Number of Consumed Segments */
++//	{0x0120,	 0,	16,	0x00}, /* XRX200_BM_CONS_PKT             Number of Consumed PacketPointers Register */
++//	{0x0120,	 0,	11,	0x00}, /* XRX200_BM_CONS_PKT_FQP         Number of Consumed Packet Pointers */
++//	{0x0124,	 0,	16,	0x00}, /* XRX200_BM_GCTRL_F              Buffer Manager Global ControlRegister 0 */
++//	{0x0124,	13,	 1,	0x00}, /* XRX200_BM_GCTRL_BM_STA         Buffer Manager Initialization Status Bit */
++//	{0x0124,	12,	 1,	0x00}, /* XRX200_BM_GCTRL_SAT            RMON Counter Update Mode */
++//	{0x0124,	11,	 1,	0x00}, /* XRX200_BM_GCTRL_FR_RBC         Freeze RMON RX Bad Byte 64 Bit Counter */
++//	{0x0124,	10,	 1,	0x00}, /* XRX200_BM_GCTRL_FR_RGC         Freeze RMON RX Good Byte 64 Bit Counter */
++//	{0x0124,	 9,	 1,	0x00}, /* XRX200_BM_GCTRL_FR_TGC         Freeze RMON TX Good Byte 64 Bit Counter */
++//	{0x0124,	 8,	 1,	0x00}, /* XRX200_BM_GCTRL_I_FIN          RAM initialization finished */
++//	{0x0124,	 7,	 1,	0x00}, /* XRX200_BM_GCTRL_CX_INI         PQM Context RAM initialization */
++//	{0x0124,	 6,	 1,	0x00}, /* XRX200_BM_GCTRL_FP_INI         FPQM RAM initialization */
++//	{0x0124,	 5,	 1,	0x00}, /* XRX200_BM_GCTRL_FS_INI         FSQM RAM initialization */
++//	{0x0124,	 4,	 1,	0x00}, /* XRX200_BM_GCTRL_R_SRES         Software Reset for RMON */
++//	{0x0124,	 3,	 1,	0x00}, /* XRX200_BM_GCTRL_S_SRES         Software Reset for Scheduler */
++//	{0x0124,	 2,	 1,	0x00}, /* XRX200_BM_GCTRL_A_SRES         Software Reset for AVG */
++//	{0x0124,	 1,	 1,	0x00}, /* XRX200_BM_GCTRL_P_SRES         Software Reset for PQM */
++//	{0x0124,	 0,	 1,	0x00}, /* XRX200_BM_GCTRL_F_SRES         Software Reset for FSQM */
++//	{0x0128,	 0,	16,	0x00}, /* XRX200_BM_QUEUE_GCTRL          Queue Manager GlobalControl Register 0 */
++//	{0x0128,	10,	 1,	0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD   WRED Mode Signal */
++//	{0x0128,	 7,	 3,	0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI     Average Queue Update Interval */
++//	{0x0128,	 3,	 4,	0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF     Average Queue Weight Factor */
++//	{0x0128,	 2,	 1,	0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN   Queue Average Calculation Enable */
++//	{0x0128,	 0,	 2,	0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB    Drop Probability Profile */
++//	{0x012C,	 0,	16,	0x00}, /* XRX200_BM_WRED_RTH_0           WRED Red Threshold Register0 */
++//	{0x012C,	 0,	10,	0x00}, /* XRX200_BM_WRED_RTH_0_MINTH     Minimum Threshold */
++//	{0x0130,	 0,	16,	0x00}, /* XRX200_BM_WRED_RTH_1           WRED Red Threshold Register1 */
++//	{0x0130,	 0,	10,	0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH     Maximum Threshold */
++//	{0x0134,	 0,	16,	0x00}, /* XRX200_BM_WRED_YTH_0           WRED Yellow ThresholdRegister 0 */
++//	{0x0134,	 0,	10,	0x00}, /* XRX200_BM_WRED_YTH_0_MINTH     Minimum Threshold */
++//	{0x0138,	 0,	16,	0x00}, /* XRX200_BM_WRED_YTH_1           WRED Yellow ThresholdRegister 1 */
++//	{0x0138,	 0,	10,	0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH     Maximum Threshold */
++//	{0x013C,	 0,	16,	0x00}, /* XRX200_BM_WRED_GTH_0           WRED Green ThresholdRegister 0 */
++//	{0x013C,	 0,	10,	0x00}, /* XRX200_BM_WRED_GTH_0_MINTH     Minimum Threshold */
++//	{0x0140,	 0,	16,	0x00}, /* XRX200_BM_WRED_GTH_1           WRED Green ThresholdRegister 1 */
++//	{0x0140,	 0,	10,	0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH     Maximum Threshold */
++//	{0x0144,	 0,	16,	0x00}, /* XRX200_BM_DROP_GTH_0_THR       Drop Threshold ConfigurationRegister 0 */
++//	{0x0144,	 0,	11,	0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ    Threshold for frames marked red */
++//	{0x0148,	 0,	16,	0x00}, /* XRX200_BM_DROP_GTH_1_THY       Drop Threshold ConfigurationRegister 1 */
++//	{0x0148,	 0,	11,	0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ    Threshold for frames marked yellow */
++//	{0x014C,	 0,	16,	0x00}, /* XRX200_BM_DROP_GTH_2_THG       Drop Threshold ConfigurationRegister 2 */
++//	{0x014C,	 0,	11,	0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ    Threshold for frames marked green */
++//	{0x0150,	 0,	16,	0x00}, /* XRX200_BM_IER                  Buffer Manager Global InterruptEnable Register */
++//	{0x0150,	 7,	 1,	0x00}, /* XRX200_BM_IER_CNT4             Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
++//	{0x0150,	 6,	 1,	0x00}, /* XRX200_BM_IER_CNT3             Counter Group 3 (RMON-PQM) Interrupt Enable */
++//	{0x0150,	 5,	 1,	0x00}, /* XRX200_BM_IER_CNT2             Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
++//	{0x0150,	 4,	 1,	0x00}, /* XRX200_BM_IER_CNT1             Counter Group 1 (RMON-QFETCH) Interrupt Enable */
++//	{0x0150,	 3,	 1,	0x00}, /* XRX200_BM_IER_CNT0             Counter Group 0 (RMON-QSTOR) Interrupt Enable */
++//	{0x0150,	 2,	 1,	0x00}, /* XRX200_BM_IER_DEQ              PQM dequeue Interrupt Enable */
++//	{0x0150,	 1,	 1,	0x00}, /* XRX200_BM_IER_ENQ              PQM Enqueue Interrupt Enable */
++//	{0x0150,	 0,	 1,	0x00}, /* XRX200_BM_IER_FSQM             Buffer Empty Interrupt Enable */
++//	{0x0154,	 0,	16,	0x00}, /* XRX200_BM_ISR                  Buffer Manager Global InterruptStatus Register */
++//	{0x0154,	 7,	 1,	0x00}, /* XRX200_BM_ISR_CNT4             Counter Group 4 Interrupt */
++//	{0x0154,	 6,	 1,	0x00}, /* XRX200_BM_ISR_CNT3             Counter Group 3 Interrupt */
++//	{0x0154,	 5,	 1,	0x00}, /* XRX200_BM_ISR_CNT2             Counter Group 2 Interrupt */
++//	{0x0154,	 4,	 1,	0x00}, /* XRX200_BM_ISR_CNT1             Counter Group 1 Interrupt */
++//	{0x0154,	 3,	 1,	0x00}, /* XRX200_BM_ISR_CNT0             Counter Group 0 Interrupt */
++//	{0x0154,	 2,	 1,	0x00}, /* XRX200_BM_ISR_DEQ              PQM dequeue Interrupt Enable */
++//	{0x0154,	 1,	 1,	0x00}, /* XRX200_BM_ISR_ENQ              PQM Enqueue Interrupt */
++//	{0x0154,	 0,	 1,	0x00}, /* XRX200_BM_ISR_FSQM             Buffer Empty Interrupt */
++//	{0x0158,	 0,	16,	0x00}, /* XRX200_BM_CISEL                Buffer Manager RMON CounterInterrupt Select Register */
++//	{0x0158,	 0,	 3,	0x00}, /* XRX200_BM_CISEL_PORT           Port Number */
++//	{0x015C,	 0,	16,	0x00}, /* XRX200_BM_DEBUG_CTRL_DBG       Debug Control Register */
++//	{0x015C,	 0,	 8,	0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL   Select Signal for Debug Multiplexer */
++//	{0x0160,	 0,	16,	0x00}, /* XRX200_BM_DEBUG_VAL_DBG        Debug Value Register */
++//	{0x0160,	 0,	16,	0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT    Debug Data Value */
++//	{0x0200,	 0,	16,	0x08}, /* XRX200_BM_PCFG                 Buffer Manager PortConfiguration Register */
++//	{0x0200,	 0,	 1,	0x08}, /* XRX200_BM_PCFG_CNTEN           RMON Counter Enable */
++//	{0x0204,	 0,	16,	0x08}, /* XRX200_BM_RMON_CTRL_RAM1       Buffer ManagerRMON Control Register */
++//	{0x0204,	 1,	 1,	0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES   Software Reset for RMON RAM2 */
++//	{0x0204,	 0,	 1,	0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES   Software Reset for RMON RAM1 */
++//	{0x0400,	 0,	16,	0x08}, /* XRX200_PQM_DP                  Packet Queue ManagerDrop Probability Register */
++//	{0x0400,	 0,	 2,	0x08}, /* XRX200_PQM_DP_DPROB            Drop Probability Profile */
++//	{0x0404,	 0,	16,	0x08}, /* XRX200_PQM_RS                  Packet Queue ManagerRate Shaper Assignment Register */
++//	{0x0404,	15,	 1,	0x08}, /* XRX200_PQM_RS_EN2              Rate Shaper 2 Enable */
++//	{0x0404,	 8,	 6,	0x08}, /* XRX200_PQM_RS_RS2              Rate Shaper 2 */
++//	{0x0404,	 7,	 1,	0x08}, /* XRX200_PQM_RS_EN1              Rate Shaper 1 Enable */
++//	{0x0404,	 0,	 6,	0x08}, /* XRX200_PQM_RS_RS1              Rate Shaper 1 */
++//	{0x0500,	 0,	16,	0x14}, /* XRX200_RS_CTRL                 Rate Shaper ControlRegister */
++//	{0x0500,	 0,	 1,	0x14}, /* XRX200_RS_CTRL_RSEN            Rate Shaper Enable */
++//	{0x0504,	 0,	16,	0x14}, /* XRX200_RS_CBS                  Rate Shaper CommittedBurst Size Register */
++//	{0x0504,	 0,	10,	0x14}, /* XRX200_RS_CBS_CBS              Committed Burst Size */
++//	{0x0508,	 0,	16,	0x14}, /* XRX200_RS_IBS                  Rate Shaper InstantaneousBurst Size Register */
++//	{0x0508,	 0,	 2,	0x14}, /* XRX200_RS_IBS_IBS              Instantaneous Burst Size */
++//	{0x050C,	 0,	16,	0x14}, /* XRX200_RS_CIR_EXP              Rate Shaper RateExponent Register */
++//	{0x050C,	 0,	 4,	0x14}, /* XRX200_RS_CIR_EXP_EXP          Exponent */
++//	{0x0510,	 0,	16,	0x14}, /* XRX200_RS_CIR_MANT             Rate Shaper RateMantissa Register */
++//	{0x0510,	 0,	10,	0x14}, /* XRX200_RS_CIR_MANT_MANT        Mantissa */
++	{0x1100,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_7           Table Key Data 7 */
++//	{0x1100,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7      Key Value[15:0] */
++	{0x1104,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_6           Table Key Data 6 */
++//	{0x1104,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6      Key Value[15:0] */
++	{0x1108,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_5           Table Key Data 5 */
++//	{0x1108,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5      Key Value[15:0] */
++	{0x110C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_4           Table Key Data 4 */
++//	{0x110C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4      Key Value[15:0] */
++	{0x1110,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_3           Table Key Data 3 */
++//	{0x1110,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3      Key Value[15:0] */
++	{0x1114,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_2           Table Key Data 2 */
++//	{0x1114,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2      Key Value[15:0] */
++	{0x1118,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_1           Table Key Data 1 */
++//	{0x1118,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1      Key Value[31:16] */
++	{0x111C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_0           Table Key Data 0 */
++//	{0x111C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0      Key Value[15:0] */
++	{0x1120,	 0,	16,	0x00}, /* XRX200_PCE_TBL_MASK_0          Table Mask Write Register0 */
++//	{0x1120,	 0,	16,	0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0    Mask Pattern [15:0] */
++	{0x1124,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_4           Table Value Register4 */
++//	{0x1124,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4      Data value [15:0] */
++	{0x1128,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_3           Table Value Register3 */
++//	{0x1128,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3      Data value [15:0] */
++	{0x112C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_2           Table Value Register2 */
++//	{0x112C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2      Data value [15:0] */
++	{0x1130,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_1           Table Value Register1 */
++//	{0x1130,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1      Data value [15:0] */
++	{0x1134,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_0           Table Value Register0 */
++//	{0x1134,	 0,	16,	0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0      Data value [15:0] */
++//	{0x1138,	 0,	16,	0x00}, /* XRX200_PCE_TBL_ADDR            Table Entry AddressRegister */
++	{0x1138,	 0,	11,	0x00}, /* XRX200_PCE_TBL_ADDR_ADDR       Table Address */
++//	{0x113C,	 0,	16,	0x00}, /* XRX200_PCE_TBL_CTRL            Table Access ControlRegister */
++	{0x113C,	15,	 1,	0x00}, /* XRX200_PCE_TBL_CTRL_BAS        Access Busy/Access Start */
++	{0x113C,	13,	 1,	0x00}, /* XRX200_PCE_TBL_CTRL_TYPE       Lookup Entry Type */
++	{0x113C,	12,	 1,	0x00}, /* XRX200_PCE_TBL_CTRL_VLD        Lookup Entry Valid */
++	{0x113C,	 7,	 4,	0x00}, /* XRX200_PCE_TBL_CTRL_GMAP       Group Map */
++	{0x113C,	 5,	 2,	0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD      Lookup Table Access Operation Mode */
++	{0x113C,	 0,	 5,	0x00}, /* XRX200_PCE_TBL_CTRL_ADDR       Lookup Table Address */
++//	{0x1140,	 0,	16,	0x00}, /* XRX200_PCE_TBL_STAT            Table General StatusRegister */
++//	{0x1140,	 2,	 1,	0x00}, /* XRX200_PCE_TBL_STAT_TBUSY      Table Access Busy */
++//	{0x1140,	 1,	 1,	0x00}, /* XRX200_PCE_TBL_STAT_TEMPT      Table Empty */
++//	{0x1140,	 0,	 1,	0x00}, /* XRX200_PCE_TBL_STAT_TFUL       Table Full */
++//	{0x1144,	 0,	16,	0x00}, /* XRX200_PCE_AGE_0               Aging Counter ConfigurationRegister 0 */
++//	{0x1144,	 0,	 4,	0x00}, /* XRX200_PCE_AGE_0_EXP           Aging Counter Exponent Value  */
++//	{0x1148,	 0,	16,	0x00}, /* XRX200_PCE_AGE_1               Aging Counter ConfigurationRegister 1 */
++//	{0x1148,	 0,	16,	0x00}, /* XRX200_PCE_AGE_1_MANT          Aging Counter Mantissa Value  */
++//	{0x114C,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_1              Port Map Register 1 */
++//	{0x114C,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_1_MPMAP        Monitoring Port Map */
++//	{0x1150,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_2              Port Map Register 2 */
++//	{0x1150,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP      Default Multicast Port Map */
++//	{0x1154,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_3              Port Map Register 3 */
++//	{0x1154,	 0,	16,	0x00}, /* XRX200_PCE_PMAP_3_UUCMAP       Default Unknown Unicast Port Map */
++//	{0x1158,	 0,	16,	0x00}, /* XRX200_PCE_GCTRL_0             PCE Global Control Register0 */
++//	{0x1158,	15,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_IGMP        IGMP Mode Selection */
++	{0x1158,	14,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_VLAN        VLAN-aware Switching */
++//	{0x1158,	13,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_NOPM        No Port Map Forwarding */
++//	{0x1158,	12,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_SCONUC      Unknown Unicast Storm Control */
++//	{0x1158,	11,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_SCONMC      Multicast Storm Control */
++//	{0x1158,	10,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_SCONBC      Broadcast Storm Control */
++//	{0x1158,	 8,	 2,	0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD     Storm Control Mode */
++//	{0x1158,	 4,	 4,	0x00}, /* XRX200_PCE_GCTRL_0_SCONMET     Storm Control Metering Instance */
++//	{0x1158,	 3,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID    Access Request */
++//	{0x1158,	 2,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD     Port Lock Mode */
++//	{0x1158,	 1,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD     MAC Address Learning Limitation Mode */
++//	{0x1158,	 0,	 1,	0x00}, /* XRX200_PCE_GCTRL_0_MTFL        MAC Table Flushing */
++//	{0x115C,	 0,	16,	0x00}, /* XRX200_PCE_GCTRL_1             PCE Global Control Register1 */
++//	{0x115C,	 1,	 1,	0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS     PCE Disable after currently processed packet */
++//	{0x115C,	 0,	 1,	0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD      MAC Address Learning Mode */
++//	{0x1160,	 0,	16,	0x00}, /* XRX200_PCE_TCM_GLOB_CTRL       Three-color MarkerGlobal Control Register */
++//	{0x1160,	 6,	 3,	0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */
++//	{0x1160,	 3,	 3,	0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */
++//	{0x1160,	 0,	 3,	0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */
++//	{0x1164,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_CTRL           IGMP Control Register */
++//	{0x1164,	15,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN    Force Aging of Table Entries Enable */
++//	{0x1164,	14,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE    Fast Leave Enable */
++//	{0x1164,	13,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN    Default Maximum Response Time Enable */
++//	{0x1164,	12,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP     Join Aggregation Suppression Enable */
++//	{0x1164,	11,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP    Report Suppression Enable */
++//	{0x1164,	10,	 1,	0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN     Snooping of Router Port Enable */
++//	{0x1164,	 8,	 2,	0x00}, /* XRX200_PCE_IGMP_CTRL_ROB       Robustness Variable */
++//	{0x1164,	 0,	 8,	0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT      IGMP Default Maximum Response Time */
++//	{0x1168,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_DRPM           IGMP Default RouterPort Map Register */
++//	{0x1168,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM      IGMP Default Router Port Map */
++//	{0x116C,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_AGE_0          IGMP Aging Register0 */
++//	{0x116C,	 3,	 8,	0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT     IGMP Group Aging Time Mantissa */
++//	{0x116C,	 0,	 3,	0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP      IGMP Group Aging Time Exponent */
++//	{0x1170,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_AGE_1          IGMP Aging Register1 */
++//	{0x1170,	 0,	12,	0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT     IGMP Router Port Aging Time Mantissa */
++//	{0x1174,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_STAT           IGMP Status Register */
++//	{0x1174,	 0,	16,	0x00}, /* XRX200_PCE_IGMP_STAT_IGPM      IGMP Port Map */
++//	{0x1178,	 0,	16,	0x00}, /* XRX200_WOL_GLB_CTRL            Wake-on-LAN ControlRegister */
++//	{0x1178,	 0,	 1,	0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN     WoL Password Enable */
++//	{0x117C,	 0,	16,	0x00}, /* XRX200_WOL_DA_0                Wake-on-LAN DestinationAddress Register 0 */
++//	{0x117C,	 0,	16,	0x00}, /* XRX200_WOL_DA_0_DA0            WoL Destination Address [15:0] */
++//	{0x1180,	 0,	16,	0x00}, /* XRX200_WOL_DA_1                Wake-on-LAN DestinationAddress Register 1 */
++//	{0x1180,	 0,	16,	0x00}, /* XRX200_WOL_DA_1_DA1            WoL Destination Address [31:16] */
++//	{0x1184,	 0,	16,	0x00}, /* XRX200_WOL_DA_2                Wake-on-LAN DestinationAddress Register 2 */
++//	{0x1184,	 0,	16,	0x00}, /* XRX200_WOL_DA_2_DA2            WoL Destination Address [47:32] */
++//	{0x1188,	 0,	16,	0x00}, /* XRX200_WOL_PW_0                Wake-on-LAN Password Register0 */
++//	{0x1188,	 0,	16,	0x00}, /* XRX200_WOL_PW_0_PW0            WoL Password [15:0] */
++//	{0x118C,	 0,	16,	0x00}, /* XRX200_WOL_PW_1                Wake-on-LAN Password Register1 */
++//	{0x118C,	 0,	16,	0x00}, /* XRX200_WOL_PW_1_PW1            WoL Password [31:16] */
++//	{0x1190,	 0,	16,	0x00}, /* XRX200_WOL_PW_2                Wake-on-LAN Password Register2 */
++//	{0x1190,	 0,	16,	0x00}, /* XRX200_WOL_PW_2_PW2            WoL Password [47:32] */
++//	{0x1194,	 0,	16,	0x00}, /* XRX200_PCE_IER_0_PINT          Parser and ClassificationEngine Global Interrupt Enable Register 0 */
++//	{0x1194,	15,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_15       Port Interrupt Enable */
++//	{0x1194,	14,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_14       Port Interrupt Enable */
++//	{0x1194,	13,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_13       Port Interrupt Enable */
++//	{0x1194,	12,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_12       Port Interrupt Enable */
++//	{0x1194,	11,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_11       Port Interrupt Enable */
++//	{0x1194,	10,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_10       Port Interrupt Enable */
++//	{0x1194,	 9,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_9        Port Interrupt Enable */
++//	{0x1194,	 8,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_8        Port Interrupt Enable */
++//	{0x1194,	 7,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_7        Port Interrupt Enable */
++//	{0x1194,	 6,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_6        Port Interrupt Enable */
++//	{0x1194,	 5,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_5        Port Interrupt Enable */
++//	{0x1194,	 4,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_4        Port Interrupt Enable */
++//	{0x1194,	 3,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_3        Port Interrupt Enable */
++//	{0x1194,	 2,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_2        Port Interrupt Enable */
++//	{0x1194,	 1,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_1        Port Interrupt Enable */
++//	{0x1194,	 0,	 1,	0x00}, /* XRX200_PCE_IER_0_PINT_0        Port Interrupt Enable */
++//	{0x1198,	 0,	16,	0x00}, /* XRX200_PCE_IER_1               Parser and ClassificationEngine Global Interrupt Enable Register 1 */
++//	{0x1198,	 6,	 1,	0x00}, /* XRX200_PCE_IER_1_FLOWINT       Traffic Flow Table Interrupt Rule matched Interrupt Enable */
++//	{0x1198,	 5,	 1,	0x00}, /* XRX200_PCE_IER_1_CPH2          Classification Phase 2 Ready Interrupt Enable */
++//	{0x1198,	 4,	 1,	0x00}, /* XRX200_PCE_IER_1_CPH1          Classification Phase 1 Ready Interrupt Enable */
++//	{0x1198,	 3,	 1,	0x00}, /* XRX200_PCE_IER_1_CPH0          Classification Phase 0 Ready Interrupt Enable */
++//	{0x1198,	 2,	 1,	0x00}, /* XRX200_PCE_IER_1_PRDY          Parser Ready Interrupt Enable */
++//	{0x1198,	 1,	 1,	0x00}, /* XRX200_PCE_IER_1_IGTF          IGMP Table Full Interrupt Enable */
++//	{0x1198,	 0,	 1,	0x00}, /* XRX200_PCE_IER_1_MTF           MAC Table Full Interrupt Enable */
++//	{0x119C,	 0,	16,	0x00}, /* XRX200_PCE_ISR_0_PINT          Parser and ClassificationEngine Global Interrupt Status Register 0 */
++//	{0x119C,	15,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_15       Port Interrupt */
++//	{0x119C,	14,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_14       Port Interrupt */
++//	{0x119C,	13,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_13       Port Interrupt */
++//	{0x119C,	12,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_12       Port Interrupt */
++//	{0x119C,	11,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_11       Port Interrupt */
++//	{0x119C,	10,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_10       Port Interrupt */
++//	{0x119C,	 9,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_9        Port Interrupt */
++//	{0x119C,	 8,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_8        Port Interrupt */
++//	{0x119C,	 7,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_7        Port Interrupt */
++//	{0x119C,	 6,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_6        Port Interrupt */
++//	{0x119C,	 5,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_5        Port Interrupt */
++//	{0x119C,	 4,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_4        Port Interrupt */
++//	{0x119C,	 3,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_3        Port Interrupt */
++//	{0x119C,	 2,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_2        Port Interrupt */
++//	{0x119C,	 1,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_1        Port Interrupt */
++//	{0x119C,	 0,	 1,	0x00}, /* XRX200_PCE_ISR_0_PINT_0        Port Interrupt */
++//	{0x11A0,	 0,	16,	0x00}, /* XRX200_PCE_ISR_1               Parser and ClassificationEngine Global Interrupt Status Register 1 */
++//	{0x11A0,	 6,	 1,	0x00}, /* XRX200_PCE_ISR_1_FLOWINT       Traffic Flow Table Interrupt Rule matched */
++//	{0x11A0,	 5,	 1,	0x00}, /* XRX200_PCE_ISR_1_CPH2          Classification Phase 2 Ready Interrupt */
++//	{0x11A0,	 4,	 1,	0x00}, /* XRX200_PCE_ISR_1_CPH1          Classification Phase 1 Ready Interrupt */
++//	{0x11A0,	 3,	 1,	0x00}, /* XRX200_PCE_ISR_1_CPH0          Classification Phase 0 Ready Interrupt */
++//	{0x11A0,	 2,	 1,	0x00}, /* XRX200_PCE_ISR_1_PRDY          Parser Ready Interrupt */
++//	{0x11A0,	 1,	 1,	0x00}, /* XRX200_PCE_ISR_1_IGTF          IGMP Table Full Interrupt */
++//	{0x11A0,	 0,	 1,	0x00}, /* XRX200_PCE_ISR_1_MTF           MAC Table Full Interrupt */
++//	{0x11A4,	 0,	16,	0x00}, /* XRX200_PARSER_STAT_FIFO        Parser Status Register */
++//	{0x11A4,	 8,	 8,	0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */
++//	{0x11A4,	 5,	 3,	0x00}, /* XRX200_PARSER_STAT_FSM_STATE   Parser FSM State */
++//	{0x11A4,	 4,	 1,	0x00}, /* XRX200_PARSER_STAT_PKT_ERR     Packet error detected */
++//	{0x11A4,	 3,	 1,	0x00}, /* XRX200_PARSER_STAT_FSM_FIN     Parser FSM finished */
++//	{0x11A4,	 2,	 1,	0x00}, /* XRX200_PARSER_STAT_FSM_START   Parser FSM start */
++//	{0x11A4,	 1,	 1,	0x00}, /* XRX200_PARSER_STAT_FIFO_RDY    Parser FIFO ready for read. */
++//	{0x11A4,	 0,	 1,	0x00}, /* XRX200_PARSER_STAT_FIFO_FULL   Parser */
++//	{0x1200,	 0,	16,	0x28}, /* XRX200_PCE_PCTRL_0             PCE Port ControlRegister 0 */
++//	{0x1200,	13,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_MCST        Multicast Forwarding Mode Selection */
++//	{0x1200,	12,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN      Table-based Egress Special Tag Enable */
++//	{0x1200,	11,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN      Ingress Special Tag Enable */
++//	{0x1200,	10,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_PCPEN       PCP Remarking Mode */
++//	{0x1200,	 9,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_CLPEN       Class Remarking Mode */
++//	{0x1200,	 8,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_DPEN        Drop Precedence Remarking Mode */
++//	{0x1200,	 7,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_CMOD        Three-color Marker Color Mode */
++//	{0x1200,	 6,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_VREP        VLAN Replacement Mode */
++	{0x1200,	 5,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_TVM         Transparent VLAN Mode */
++//	{0x1200,	 4,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_PLOCK       Port Locking Enable */
++//	{0x1200,	 3,	 1,	0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS      Aging Disable */
++//	{0x1200,	 0,	 3,	0x28}, /* XRX200_PCE_PCTRL_0_PSTATE      Port State */
++//	{0x1204,	 0,	16,	0x28}, /* XRX200_PCE_PCTRL_1             PCE Port ControlRegister 1 */
++//	{0x1204,	 0,	 8,	0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM      MAC Address Learning Limit */
++//	{0x1208,	 0,	16,	0x28}, /* XRX200_PCE_PCTRL_2             PCE Port ControlRegister 2 */
++//	{0x1208,	 7,	 1,	0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD     DSCP Mode Selection */
++//	{0x1208,	 5,	 2,	0x28}, /* XRX200_PCE_PCTRL_2_DSCP        Enable DSCP to select the Class of Service */
++//	{0x1208,	 4,	 1,	0x28}, /* XRX200_PCE_PCTRL_2_PCP         Enable VLAN PCP to select the Class of Service */
++//	{0x1208,	 0,	 4,	0x28}, /* XRX200_PCE_PCTRL_2_PCLASS      Port-based Traffic Class */
++//	{0x120C,	 0,	16,	0x28}, /* XRX200_PCE_PCTRL_3_VIO         PCE Port ControlRegister 3 */
++//	{0x120C,	11,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_EDIR        Egress Redirection Mode */
++//	{0x120C,	10,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR      Receive Mirroring Enable for dropped frames */
++//	{0x120C,	 9,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR      Receive Mirroring Enable for valid frames */
++//	{0x120C,	 8,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_TXMIR       Transmit Mirroring Enable */
++//	{0x120C,	 7,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_7       Violation Type 7 Mirroring Enable */
++//	{0x120C,	 6,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_6       Violation Type 6 Mirroring Enable */
++//	{0x120C,	 5,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_5       Violation Type 5 Mirroring Enable */
++//	{0x120C,	 4,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_4       Violation Type 4 Mirroring Enable */
++//	{0x120C,	 3,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_3       Violation Type 3 Mirroring Enable */
++//	{0x120C,	 2,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_2       Violation Type 2 Mirroring Enable */
++//	{0x120C,	 1,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_1       Violation Type 1 Mirroring Enable */
++//	{0x120C,	 0,	 1,	0x28}, /* XRX200_PCE_PCTRL_3_VIO_0       Violation Type 0 Mirroring Enable */
++//	{0x1210,	 0,	16,	0x28}, /* XRX200_WOL_CTRL                Wake-on-LAN ControlRegister */
++//	{0x1210,	 0,	 1,	0x28}, /* XRX200_WOL_CTRL_PORT           WoL Enable */
++//	{0x1214,	 0,	16,	0x28}, /* XRX200_PCE_VCTRL               PCE VLAN ControlRegister */
++	{0x1214,	 5,	 1,	0x28}, /* XRX200_PCE_VCTRL_VSR           VLAN Security Rule */
++	{0x1214,	 4,	 1,	0x28}, /* XRX200_PCE_VCTRL_VEMR          VLAN Egress Member Violation Rule */
++	{0x1214,	 3,	 1,	0x28}, /* XRX200_PCE_VCTRL_VIMR          VLAN Ingress Member Violation Rule */
++	{0x1214,	 1,	 2,	0x28}, /* XRX200_PCE_VCTRL_VINR          VLAN Ingress Tag Rule */
++	{0x1214,	 0,	 1,	0x28}, /* XRX200_PCE_VCTRL_UVR           Unknown VLAN Rule */
++//	{0x1218,	 0,	16,	0x28}, /* XRX200_PCE_DEFPVID             PCE Default PortVID Register */
++	{0x1218,	 0,	 6,	0x28}, /* XRX200_PCE_DEFPVID_PVID        Default Port VID Index */
++//	{0x121C,	 0,	16,	0x28}, /* XRX200_PCE_PSTAT               PCE Port StatusRegister */
++//	{0x121C,	 0,	16,	0x28}, /* XRX200_PCE_PSTAT_LRNCNT        Learning Count */
++//	{0x1220,	 0,	16,	0x28}, /* XRX200_PCE_PIER                Parser and ClassificationEngine Port Interrupt Enable Register */
++//	{0x1220,	 5,	 1,	0x28}, /* XRX200_PCE_PIER_CLDRP          Classification Drop Interrupt Enable */
++//	{0x1220,	 4,	 1,	0x28}, /* XRX200_PCE_PIER_PTDRP          Port Drop Interrupt Enable */
++//	{0x1220,	 3,	 1,	0x28}, /* XRX200_PCE_PIER_VLAN           VLAN Violation Interrupt Enable */
++//	{0x1220,	 2,	 1,	0x28}, /* XRX200_PCE_PIER_WOL            Wake-on-LAN Interrupt Enable */
++//	{0x1220,	 1,	 1,	0x28}, /* XRX200_PCE_PIER_LOCK           Port Limit Alert Interrupt Enable */
++//	{0x1220,	 0,	 1,	0x28}, /* XRX200_PCE_PIER_LIM            Port Lock Alert Interrupt Enable */
++//	{0x1224,	 0,	16,	0x28}, /* XRX200_PCE_PISR                Parser and ClassificationEngine Port Interrupt Status Register */
++//	{0x1224,	 5,	 1,	0x28}, /* XRX200_PCE_PISR_CLDRP          Classification Drop Interrupt */
++//	{0x1224,	 4,	 1,	0x28}, /* XRX200_PCE_PISR_PTDRP          Port Drop Interrupt */
++//	{0x1224,	 3,	 1,	0x28}, /* XRX200_PCE_PISR_VLAN           VLAN Violation Interrupt */
++//	{0x1224,	 2,	 1,	0x28}, /* XRX200_PCE_PISR_WOL            Wake-on-LAN Interrupt */
++//	{0x1224,	 1,	 1,	0x28}, /* XRX200_PCE_PISR_LOCK           Port Lock Alert Interrupt */
++//	{0x1224,	 0,	 1,	0x28}, /* XRX200_PCE_PISR_LIMIT          Port Limitation Alert Interrupt */
++//	{0x1600,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_CTRL            Three-colorMarker Control Register */
++//	{0x1600,	 0,	 1,	0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN      Three-color Marker metering instance enable */
++//	{0x1604,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_STAT            Three-colorMarker Status Register */
++//	{0x1604,	 1,	 1,	0x1c}, /* XRX200_PCE_TCM_STAT_AL1        Three-color Marker Alert 1 Status */
++//	{0x1604,	 0,	 1,	0x1c}, /* XRX200_PCE_TCM_STAT_AL0        Three-color Marker Alert 0 Status */
++//	{0x1608,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_CBS             Three-color MarkerCommitted Burst Size Register */
++//	{0x1608,	 0,	10,	0x1c}, /* XRX200_PCE_TCM_CBS_CBS         Committed Burst Size */
++//	{0x160C,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_EBS             Three-color MarkerExcess Burst Size Register */
++//	{0x160C,	 0,	10,	0x1c}, /* XRX200_PCE_TCM_EBS_EBS         Excess Burst Size */
++//	{0x1610,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_IBS             Three-color MarkerInstantaneous Burst Size Register */
++//	{0x1610,	 0,	 2,	0x1c}, /* XRX200_PCE_TCM_IBS_IBS         Instantaneous Burst Size */
++//	{0x1614,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_CIR_MANT        Three-colorMarker Constant Information Rate Mantissa Register */
++//	{0x1614,	 0,	10,	0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT   Rate Counter Mantissa */
++//	{0x1618,	 0,	16,	0x1c}, /* XRX200_PCE_TCM_CIR_EXP         Three-colorMarker Constant Information Rate Exponent Register */
++//	{0x1618,	 0,	 4,	0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP     Rate Counter Exponent */
++//	{0x2300,	 0,	16,	0x00}, /* XRX200_MAC_TEST                MAC Test Register */
++//	{0x2300,	 0,	16,	0x00}, /* XRX200_MAC_TEST_JTP            Jitter Test Pattern */
++//	{0x2304,	 0,	16,	0x00}, /* XRX200_MAC_PFAD_CFG            MAC Pause FrameSource Address Configuration Register */
++//	{0x2304,	 0,	 1,	0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD      Source Address Mode */
++//	{0x2308,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_0              Pause Frame SourceAddress Part 0  */
++//	{0x2308,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_0_PFAD         Pause Frame Source Address Part 0 */
++//	{0x230C,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_1              Pause Frame SourceAddress Part 1  */
++//	{0x230C,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_1_PFAD         Pause Frame Source Address Part 1 */
++//	{0x2310,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_2              Pause Frame SourceAddress Part 2  */
++//	{0x2310,	 0,	16,	0x00}, /* XRX200_MAC_PFSA_2_PFAD         Pause Frame Source Address Part 2 */
++//	{0x2314,	 0,	16,	0x00}, /* XRX200_MAC_FLEN                MAC Frame Length Register */
++//	{0x2314,	 0,	14,	0x00}, /* XRX200_MAC_FLEN_LEN            Maximum Frame Length */
++//	{0x2318,	 0,	16,	0x00}, /* XRX200_MAC_VLAN_ETYPE_0        MAC VLAN EthertypeRegister 0 */
++//	{0x2318,	 0,	16,	0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER  Ethertype */
++//	{0x231C,	 0,	16,	0x00}, /* XRX200_MAC_VLAN_ETYPE_1        MAC VLAN EthertypeRegister 1 */
++//	{0x231C,	 0,	16,	0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER  Ethertype */
++//	{0x2320,	 0,	16,	0x00}, /* XRX200_MAC_IER                 MAC Interrupt EnableRegister */
++//	{0x2320,	 0,	 8,	0x00}, /* XRX200_MAC_IER_MACIEN          MAC Interrupt Enable */
++//	{0x2324,	 0,	16,	0x00}, /* XRX200_MAC_ISR                 MAC Interrupt StatusRegister */
++//	{0x2324,	 0,	 8,	0x00}, /* XRX200_MAC_ISR_MACINT          MAC Interrupt */
++//	{0x2400,	 0,	16,	0x30}, /* XRX200_MAC_PSTAT               MAC Port Status Register */
++//	{0x2400,	11,	 1,	0x30}, /* XRX200_MAC_PSTAT_PACT          PHY Active Status */
++	{0x2400,	10,	 1,	0x30}, /* XRX200_MAC_PSTAT_GBIT          Gigabit Speed Status */
++	{0x2400,	 9,	 1,	0x30}, /* XRX200_MAC_PSTAT_MBIT          Megabit Speed Status */
++	{0x2400,	 8,	 1,	0x30}, /* XRX200_MAC_PSTAT_FDUP          Full Duplex Status */
++//	{0x2400,	 7,	 1,	0x30}, /* XRX200_MAC_PSTAT_RXPAU         Receive Pause Status */
++//	{0x2400,	 6,	 1,	0x30}, /* XRX200_MAC_PSTAT_TXPAU         Transmit Pause Status */
++//	{0x2400,	 5,	 1,	0x30}, /* XRX200_MAC_PSTAT_RXPAUEN       Receive Pause Enable Status */
++//	{0x2400,	 4,	 1,	0x30}, /* XRX200_MAC_PSTAT_TXPAUEN       Transmit Pause Enable Status */
++	{0x2400,	 3,	 1,	0x30}, /* XRX200_MAC_PSTAT_LSTAT         Link Status */
++//	{0x2400,	 2,	 1,	0x30}, /* XRX200_MAC_PSTAT_CRS           Carrier Sense Status */
++//	{0x2400,	 1,	 1,	0x30}, /* XRX200_MAC_PSTAT_TXLPI         Transmit Low-power Idle Status */
++//	{0x2400,	 0,	 1,	0x30}, /* XRX200_MAC_PSTAT_RXLPI         Receive Low-power Idle Status */
++//	{0x2404,	 0,	16,	0x30}, /* XRX200_MAC_PISR                MAC Interrupt Status Register */
++//	{0x2404,	13,	 1,	0x30}, /* XRX200_MAC_PISR_PACT           PHY Active Status */
++//	{0x2404,	12,	 1,	0x30}, /* XRX200_MAC_PISR_SPEED          Megabit Speed Status */
++//	{0x2404,	11,	 1,	0x30}, /* XRX200_MAC_PISR_FDUP           Full Duplex Status */
++//	{0x2404,	10,	 1,	0x30}, /* XRX200_MAC_PISR_RXPAUEN        Receive Pause Enable Status */
++//	{0x2404,	 9,	 1,	0x30}, /* XRX200_MAC_PISR_TXPAUEN        Transmit Pause Enable Status */
++//	{0x2404,	 8,	 1,	0x30}, /* XRX200_MAC_PISR_LPIOFF         Receive Low-power Idle Mode is left */
++//	{0x2404,	 7,	 1,	0x30}, /* XRX200_MAC_PISR_LPION          Receive Low-power Idle Mode is entered */
++//	{0x2404,	 6,	 1,	0x30}, /* XRX200_MAC_PISR_JAM            Jam Status Detected */
++//	{0x2404,	 5,	 1,	0x30}, /* XRX200_MAC_PISR_TOOSHORT       Too Short Frame Error Detected */
++//	{0x2404,	 4,	 1,	0x30}, /* XRX200_MAC_PISR_TOOLONG        Too Long Frame Error Detected */
++//	{0x2404,	 3,	 1,	0x30}, /* XRX200_MAC_PISR_LENERR         Length Mismatch Error Detected */
++//	{0x2404,	 2,	 1,	0x30}, /* XRX200_MAC_PISR_FCSERR         Frame Checksum Error Detected */
++//	{0x2404,	 1,	 1,	0x30}, /* XRX200_MAC_PISR_TXPAUSE        Pause Frame Transmitted */
++//	{0x2404,	 0,	 1,	0x30}, /* XRX200_MAC_PISR_RXPAUSE        Pause Frame Received */
++//	{0x2408,	 0,	16,	0x30}, /* XRX200_MAC_PIER                MAC Interrupt Enable Register */
++//	{0x2408,	13,	 1,	0x30}, /* XRX200_MAC_PIER_PACT           PHY Active Status */
++//	{0x2408,	12,	 1,	0x30}, /* XRX200_MAC_PIER_SPEED          Megabit Speed Status */
++//	{0x2408,	11,	 1,	0x30}, /* XRX200_MAC_PIER_FDUP           Full Duplex Status */
++//	{0x2408,	10,	 1,	0x30}, /* XRX200_MAC_PIER_RXPAUEN        Receive Pause Enable Status */
++//	{0x2408,	 9,	 1,	0x30}, /* XRX200_MAC_PIER_TXPAUEN        Transmit Pause Enable Status */
++//	{0x2408,	 8,	 1,	0x30}, /* XRX200_MAC_PIER_LPIOFF         Low-power Idle Off Interrupt Mask */
++//	{0x2408,	 7,	 1,	0x30}, /* XRX200_MAC_PIER_LPION          Low-power Idle On Interrupt Mask */
++//	{0x2408,	 6,	 1,	0x30}, /* XRX200_MAC_PIER_JAM            Jam Status Interrupt Mask */
++//	{0x2408,	 5,	 1,	0x30}, /* XRX200_MAC_PIER_TOOSHORT       Too Short Frame Error Interrupt Mask */
++//	{0x2408,	 4,	 1,	0x30}, /* XRX200_MAC_PIER_TOOLONG        Too Long Frame Error Interrupt Mask */
++//	{0x2408,	 3,	 1,	0x30}, /* XRX200_MAC_PIER_LENERR         Length Mismatch Error Interrupt Mask */
++//	{0x2408,	 2,	 1,	0x30}, /* XRX200_MAC_PIER_FCSERR         Frame Checksum Error Interrupt Mask */
++//	{0x2408,	 1,	 1,	0x30}, /* XRX200_MAC_PIER_TXPAUSE        Transmit Pause Frame Interrupt Mask */
++//	{0x2408,	 0,	 1,	0x30}, /* XRX200_MAC_PIER_RXPAUSE        Receive Pause Frame Interrupt Mask */
++//	{0x240C,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_0              MAC Control Register0 */
++//	{0x240C,	13,	 2,	0x30}, /* XRX200_MAC_CTRL_0_LCOL         Late Collision Control */
++//	{0x240C,	12,	 1,	0x30}, /* XRX200_MAC_CTRL_0_BM           Burst Mode Control */
++//	{0x240C,	11,	 1,	0x30}, /* XRX200_MAC_CTRL_0_APADEN       Automatic VLAN Padding Enable */
++//	{0x240C,	10,	 1,	0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN      Stacked VLAN Padding Enable */
++//	{0x240C,	 9,	 1,	0x30}, /* XRX200_MAC_CTRL_0_VPADEN       VLAN Padding Enable */
++//	{0x240C,	 8,	 1,	0x30}, /* XRX200_MAC_CTRL_0_PADEN        Padding Enable */
++//	{0x240C,	 7,	 1,	0x30}, /* XRX200_MAC_CTRL_0_FCS          Transmit FCS Control */
++	{0x240C,	 4,	 3,	0x30}, /* XRX200_MAC_CTRL_0_FCON         Flow Control Mode */
++//	{0x240C,	 2,	 2,	0x30}, /* XRX200_MAC_CTRL_0_FDUP         Full Duplex Control */
++//	{0x240C,	 0,	 2,	0x30}, /* XRX200_MAC_CTRL_0_GMII         GMII/MII interface mode selection */
++//	{0x2410,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_1              MAC Control Register1 */
++//	{0x2410,	 8,	 1,	0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE     Short Preamble Control */
++//	{0x2410,	 0,	 4,	0x30}, /* XRX200_MAC_CTRL_1_IPG          Minimum Inter Packet Gap Size */
++//	{0x2414,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_2              MAC Control Register2 */
++//	{0x2414,	 3,	 1,	0x30}, /* XRX200_MAC_CTRL_2_MLEN         Maximum Untagged Frame Length */
++//	{0x2414,	 2,	 1,	0x30}, /* XRX200_MAC_CTRL_2_LCHKL        Frame Length Check Long Enable */
++//	{0x2414,	 0,	 2,	0x30}, /* XRX200_MAC_CTRL_2_LCHKS        Frame Length Check Short Enable */
++//	{0x2418,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_3              MAC Control Register3 */
++//	{0x2418,	 0,	 4,	0x30}, /* XRX200_MAC_CTRL_3_RCNT         Retry Count */
++//	{0x241C,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_4              MAC Control Register4 */
++//	{0x241C,	 7,	 1,	0x30}, /* XRX200_MAC_CTRL_4_LPIEN        LPI Mode Enable */
++//	{0x241C,	 0,	 7,	0x30}, /* XRX200_MAC_CTRL_4_WAIT         LPI Wait Time */
++//	{0x2420,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_5_PJPS         MAC Control Register5 */
++//	{0x2420,	 1,	 1,	0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP    Prolonged Jam pattern size during no-backpressure state */
++//	{0x2420,	 0,	 1,	0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP      Prolonged Jam pattern size during backpressure state */
++//	{0x2424,	 0,	16,	0x30}, /* XRX200_MAC_CTRL_6_XBUF         Transmit and ReceiveBuffer Control Register */
++//	{0x2424,	 9,	 3,	0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP  Delay */
++//	{0x2424,	 8,	 1,	0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT    Receive Buffer Initialization */
++//	{0x2424,	 6,	 1,	0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS  Bypass the Receive Buffer */
++//	{0x2424,	 3,	 3,	0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP  Delay */
++//	{0x2424,	 2,	 1,	0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT    Initialize the Transmit Buffer */
++//	{0x2424,	 0,	 1,	0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS  Bypass the Transmit Buffer */
++//	{0x2428,	 0,	16,	0x30}, /* XRX200_MAC_BUFST_XBUF          MAC Receive and TransmitBuffer Status Register */
++//	{0x2428,	 3,	 1,	0x30}, /* XRX200_MAC_BUFST_RBUF_UFL      Receive Buffer Underflow Indicator */
++//	{0x2428,	 2,	 1,	0x30}, /* XRX200_MAC_BUFST_RBUF_OFL      Receive Buffer Overflow Indicator */
++//	{0x2428,	 1,	 1,	0x30}, /* XRX200_MAC_BUFST_XBUF_UFL      Transmit Buffer Underflow Indicator */
++//	{0x2428,	 0,	 1,	0x30}, /* XRX200_MAC_BUFST_XBUF_OFL      Transmit Buffer Overflow Indicator */
++//	{0x242C,	 0,	16,	0x30}, /* XRX200_MAC_TESTEN              MAC Test Enable Register */
++//	{0x242C,	 2,	 1,	0x30}, /* XRX200_MAC_TESTEN_JTEN         Jitter Test Enable */
++//	{0x242C,	 1,	 1,	0x30}, /* XRX200_MAC_TESTEN_TXER         Transmit Error Insertion */
++//	{0x242C,	 0,	 1,	0x30}, /* XRX200_MAC_TESTEN_LOOP         MAC Loopback Enable */
++//	{0x2900,	 0,	16,	0x00}, /* XRX200_FDMA_CTRL               Ethernet Switch FetchDMA Control Register */
++//	{0x2900,	 7,	 5,	0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */
++//	{0x2900,	 4,	 3,	0x00}, /* XRX200_FDMA_CTRL_LPI_MODE      Low Power Idle Mode */
++//	{0x2900,	 2,	 2,	0x00}, /* XRX200_FDMA_CTRL_EGSTAG        Egress Special Tag Size */
++//	{0x2900,	 1,	 1,	0x00}, /* XRX200_FDMA_CTRL_IGSTAG        Ingress Special Tag Size */
++//	{0x2900,	 0,	 1,	0x00}, /* XRX200_FDMA_CTRL_EXCOL         Excessive Collision Handling */
++//	{0x2904,	 0,	16,	0x00}, /* XRX200_FDMA_STETYPE            Special Tag EthertypeControl Register */
++//	{0x2904,	 0,	16,	0x00}, /* XRX200_FDMA_STETYPE_ETYPE      Special Tag Ethertype */
++//	{0x2908,	 0,	16,	0x00}, /* XRX200_FDMA_VTETYPE            VLAN Tag EthertypeControl Register */
++//	{0x2908,	 0,	16,	0x00}, /* XRX200_FDMA_VTETYPE_ETYPE      VLAN Tag Ethertype */
++//	{0x290C,	 0,	16,	0x00}, /* XRX200_FDMA_STAT_0             FDMA Status Register0 */
++//	{0x290C,	 0,	16,	0x00}, /* XRX200_FDMA_STAT_0_FSMS        FSM states status */
++//	{0x2910,	 0,	16,	0x00}, /* XRX200_FDMA_IER                Fetch DMA Global InterruptEnable Register */
++//	{0x2910,	14,	 1,	0x00}, /* XRX200_FDMA_IER_PCKD           Packet Drop Interrupt Enable */
++//	{0x2910,	13,	 1,	0x00}, /* XRX200_FDMA_IER_PCKR           Packet Ready Interrupt Enable */
++//	{0x2910,	 0,	 8,	0x00}, /* XRX200_FDMA_IER_PCKT           Packet Sent Interrupt Enable */
++//	{0x2914,	 0,	16,	0x00}, /* XRX200_FDMA_ISR                Fetch DMA Global InterruptStatus Register */
++//	{0x2914,	14,	 1,	0x00}, /* XRX200_FDMA_ISR_PCKTD          Packet Drop */
++//	{0x2914,	13,	 1,	0x00}, /* XRX200_FDMA_ISR_PCKR           Packet is Ready for Transmission */
++//	{0x2914,	 0,	 8,	0x00}, /* XRX200_FDMA_ISR_PCKT           Packet Sent Event */
++//	{0x2A00,	 0,	16,	0x18}, /* XRX200_FDMA_PCTRL              Ethernet SwitchFetch DMA Port Control Register */
++//	{0x2A00,	 3,	 2,	0x18}, /* XRX200_FDMA_PCTRL_VLANMOD      VLAN Modification Enable */
++//	{0x2A00,	 2,	 1,	0x18}, /* XRX200_FDMA_PCTRL_DSCPRM       DSCP Re-marking Enable */
++//	{0x2A00,	 1,	 1,	0x18}, /* XRX200_FDMA_PCTRL_STEN         Special Tag Insertion Enable */
++//	{0x2A00,	 0,	 1,	0x18}, /* XRX200_FDMA_PCTRL_EN           FDMA Port Enable */
++//	{0x2A04,	 0,	16,	0x18}, /* XRX200_FDMA_PRIO               Ethernet SwitchFetch DMA Port Priority Register */
++//	{0x2A04,	 0,	 2,	0x18}, /* XRX200_FDMA_PRIO_PRIO          FDMA PRIO */
++//	{0x2A08,	 0,	16,	0x18}, /* XRX200_FDMA_PSTAT0             Ethernet SwitchFetch DMA Port Status Register 0 */
++//	{0x2A08,	15,	 1,	0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL   Port Egress Packet Available */
++//	{0x2A08,	14,	 1,	0x18}, /* XRX200_FDMA_PSTAT0_POK         Port Status OK */
++//	{0x2A08,	 0,	 6,	0x18}, /* XRX200_FDMA_PSTAT0_PSEG        Port Egress Segment Count */
++//	{0x2A0C,	 0,	16,	0x18}, /* XRX200_FDMA_PSTAT1_HDR         Ethernet SwitchFetch DMA Port Status Register 1 */
++//	{0x2A0C,	 0,	10,	0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR     Header Pointer */
++//	{0x2A10,	 0,	16,	0x18}, /* XRX200_FDMA_TSTAMP0            Egress TimeStamp Register 0 */
++//	{0x2A10,	 0,	16,	0x18}, /* XRX200_FDMA_TSTAMP0_TSTL       Time Stamp [15:0] */
++//	{0x2A14,	 0,	16,	0x18}, /* XRX200_FDMA_TSTAMP1            Egress TimeStamp Register 1 */
++//	{0x2A14,	 0,	16,	0x18}, /* XRX200_FDMA_TSTAMP1_TSTH       Time Stamp [31:16] */
++//	{0x2D00,	 0,	16,	0x00}, /* XRX200_SDMA_CTRL               Ethernet Switch StoreDMA Control Register */
++//	{0x2D00,	 0,	 1,	0x00}, /* XRX200_SDMA_CTRL_TSTEN         Time Stamp Enable */
++//	{0x2D04,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR1             SDMA Flow Control Threshold1 Register */
++//	{0x2D04,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR1_THR1        Threshold 1 */
++//	{0x2D08,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR2             SDMA Flow Control Threshold2 Register */
++//	{0x2D08,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR2_THR2        Threshold 2 */
++//	{0x2D0C,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR3             SDMA Flow Control Threshold3 Register */
++//	{0x2D0C,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR3_THR3        Threshold 3 */
++//	{0x2D10,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR4             SDMA Flow Control Threshold4 Register */
++//	{0x2D10,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR4_THR4        Threshold 4 */
++//	{0x2D14,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR5             SDMA Flow Control Threshold5 Register */
++//	{0x2D14,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR5_THR5        Threshold 5 */
++//	{0x2D18,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR6             SDMA Flow Control Threshold6 Register */
++//	{0x2D18,	 0,	10,	0x00}, /* XRX200_SDMA_FCTHR6_THR6        Threshold 6 */
++//	{0x2D1C,	 0,	16,	0x00}, /* XRX200_SDMA_FCTHR7             SDMA Flow Control Threshold7 Register */
++//	{0x2D1C,	 0,	11,	0x00}, /* XRX200_SDMA_FCTHR7_THR7        Threshold 7 */
++//	{0x2D20,	 0,	16,	0x00}, /* XRX200_SDMA_STAT_0             SDMA Status Register0 */
++//	{0x2D20,	 4,	 3,	0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL    Back Pressure Status */
++//	{0x2D20,	 2,	 2,	0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT     Back Pressure Status */
++//	{0x2D20,	 0,	 2,	0x00}, /* XRX200_SDMA_STAT_0_DROP        Back Pressure Status */
++//	{0x2D24,	 0,	16,	0x00}, /* XRX200_SDMA_STAT_1             SDMA Status Register1 */
++//	{0x2D24,	 0,	10,	0x00}, /* XRX200_SDMA_STAT_1_FILL        Buffer Filling Level */
++//	{0x2D28,	 0,	16,	0x00}, /* XRX200_SDMA_STAT_2             SDMA Status Register2 */
++//	{0x2D28,	 0,	16,	0x00}, /* XRX200_SDMA_STAT_2_FSMS        FSM states status */
++//	{0x2D2C,	 0,	16,	0x00}, /* XRX200_SDMA_IER                SDMA Interrupt Enable Register */
++//	{0x2D2C,	15,	 1,	0x00}, /* XRX200_SDMA_IER_BPEX           Buffer Pointers Exceeded */
++//	{0x2D2C,	14,	 1,	0x00}, /* XRX200_SDMA_IER_BFULL          Buffer Full */
++//	{0x2D2C,	13,	 1,	0x00}, /* XRX200_SDMA_IER_FERR           Frame Error */
++//	{0x2D2C,	 0,	 8,	0x00}, /* XRX200_SDMA_IER_FRX            Frame Received Successfully */
++//	{0x2D30,	 0,	16,	0x00}, /* XRX200_SDMA_ISR                SDMA Interrupt Status Register */
++//	{0x2D30,	15,	 1,	0x00}, /* XRX200_SDMA_ISR_BPEX           Packet Descriptors Exceeded */
++//	{0x2D30,	14,	 1,	0x00}, /* XRX200_SDMA_ISR_BFULL          Buffer Full */
++//	{0x2D30,	13,	 1,	0x00}, /* XRX200_SDMA_ISR_FERR           Frame Error */
++//	{0x2D30,	 0,	 8,	0x00}, /* XRX200_SDMA_ISR_FRX            Frame Received Successfully */
++//	{0x2F00,	 0,	16,	0x18}, /* XRX200_SDMA_PCTRL              Ethernet SwitchStore DMA Port Control Register */
++//	{0x2F00,	13,	 2,	0x18}, /* XRX200_SDMA_PCTRL_DTHR         Drop Threshold Selection */
++//	{0x2F00,	11,	 2,	0x18}, /* XRX200_SDMA_PCTRL_PTHR         Pause Threshold Selection */
++//	{0x2F00,	10,	 1,	0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD      Forward PHY Error Frames */
++//	{0x2F00,	 9,	 1,	0x18}, /* XRX200_SDMA_PCTRL_ALGFWD       Forward Alignment Error Frames */
++//	{0x2F00,	 8,	 1,	0x18}, /* XRX200_SDMA_PCTRL_LENFWD       Forward Length Errored Frames */
++//	{0x2F00,	 7,	 1,	0x18}, /* XRX200_SDMA_PCTRL_OSFWD        Forward Oversized Frames */
++//	{0x2F00,	 6,	 1,	0x18}, /* XRX200_SDMA_PCTRL_USFWD        Forward Undersized Frames */
++//	{0x2F00,	 5,	 1,	0x18}, /* XRX200_SDMA_PCTRL_FCSIGN       Ignore FCS Errors */
++//	{0x2F00,	 4,	 1,	0x18}, /* XRX200_SDMA_PCTRL_FCSFWD       Forward FCS Errored Frames */
++//	{0x2F00,	 3,	 1,	0x18}, /* XRX200_SDMA_PCTRL_PAUFWD       Pause Frame Forwarding */
++//	{0x2F00,	 2,	 1,	0x18}, /* XRX200_SDMA_PCTRL_MFCEN        Metering Flow Control Enable */
++//	{0x2F00,	 1,	 1,	0x18}, /* XRX200_SDMA_PCTRL_FCEN         Flow Control Enable */
++//	{0x2F00,	 0,	 1,	0x18}, /* XRX200_SDMA_PCTRL_PEN          Port Enable */
++//	{0x2F04,	 0,	16,	0x18}, /* XRX200_SDMA_PRIO               Ethernet SwitchStore DMA Port Priority Register */
++//	{0x2F04,	 0,	 2,	0x18}, /* XRX200_SDMA_PRIO_PRIO          SDMA PRIO */
++//	{0x2F08,	 0,	16,	0x18}, /* XRX200_SDMA_PSTAT0_HDR         Ethernet SwitchStore DMA Port Status Register 0 */
++//	{0x2F08,	 0,	10,	0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR     Port Ingress Queue Header Pointer */
++//	{0x2F0C,	 0,	16,	0x18}, /* XRX200_SDMA_PSTAT1             Ethernet SwitchStore DMA Port Status Register 1 */
++//	{0x2F0C,	 0,	10,	0x18}, /* XRX200_SDMA_PSTAT1_PPKT        Port Ingress Packet Count */
++//	{0x2F10,	 0,	16,	0x18}, /* XRX200_SDMA_TSTAMP0            Ingress TimeStamp Register 0 */
++//	{0x2F10,	 0,	16,	0x18}, /* XRX200_SDMA_TSTAMP0_TSTL       Time Stamp [15:0] */
++//	{0x2F14,	 0,	16,	0x18}, /* XRX200_SDMA_TSTAMP1            Ingress TimeStamp Register 1 */
++//	{0x2F14,	 0,	16,	0x18}, /* XRX200_SDMA_TSTAMP1_TSTH       Time Stamp [31:16] */
++};
++
++
diff --git a/target/linux/lantiq/patches-4.4/0026-NET-multi-phy-support.patch b/target/linux/lantiq/patches-4.4/0026-NET-multi-phy-support.patch
new file mode 100644
index 0000000..c19ddd3
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0026-NET-multi-phy-support.patch
@@ -0,0 +1,53 @@
+From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Sun, 27 Jul 2014 09:38:50 +0100
+Subject: [PATCH 26/36] NET: multi phy support
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/net/phy/phy.c |    9 ++++++---
+ include/linux/phy.h   |    1 +
+ 2 files changed, 7 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -888,7 +888,8 @@ void phy_state_machine(struct work_struc
+ 		/* If the link is down, give up on negotiation for now */
+ 		if (!phydev->link) {
+ 			phydev->state = PHY_NOLINK;
+-			netif_carrier_off(phydev->attached_dev);
++			if (!phydev->no_auto_carrier_off)
++				netif_carrier_off(phydev->attached_dev);
+ 			phydev->adjust_link(phydev->attached_dev);
+ 			break;
+ 		}
+@@ -971,7 +972,8 @@ void phy_state_machine(struct work_struc
+ 			netif_carrier_on(phydev->attached_dev);
+ 		} else {
+ 			phydev->state = PHY_NOLINK;
+-			netif_carrier_off(phydev->attached_dev);
++			if (!phydev->no_auto_carrier_off)
++				netif_carrier_off(phydev->attached_dev);
+ 		}
+ 
+ 		phydev->adjust_link(phydev->attached_dev);
+@@ -983,7 +985,8 @@ void phy_state_machine(struct work_struc
+ 	case PHY_HALTED:
+ 		if (phydev->link) {
+ 			phydev->link = 0;
+-			netif_carrier_off(phydev->attached_dev);
++			if (!phydev->no_auto_carrier_off)
++				netif_carrier_off(phydev->attached_dev);
+ 			phydev->adjust_link(phydev->attached_dev);
+ 			do_suspend = true;
+ 		}
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -377,6 +377,7 @@ struct phy_device {
+ 	bool is_pseudo_fixed_link;
+ 	bool has_fixups;
+ 	bool suspended;
++	bool no_auto_carrier_off;
+ 
+ 	enum phy_state state;
+ 
diff --git a/target/linux/lantiq/patches-4.4/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-4.4/0028-NET-lantiq-various-etop-fixes.patch
new file mode 100644
index 0000000..81eccf2
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0028-NET-lantiq-various-etop-fixes.patch
@@ -0,0 +1,911 @@
+From 870ed9cae083ff8a60a739ef7e74c5a1800533be Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Tue, 9 Sep 2014 22:45:34 +0200
+Subject: [PATCH 28/36] NET: lantiq: various etop fixes
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/net/ethernet/lantiq_etop.c |  555 +++++++++++++++++++++++++-----------
+ 1 file changed, 389 insertions(+), 166 deletions(-)
+
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -11,7 +11,7 @@
+  *   You should have received a copy of the GNU General Public License
+  *   along with this program; if not, see <http://www.gnu.org/licenses/>.
+  *
+- *   Copyright (C) 2011 John Crispin <blogic at openwrt.org>
++ *   Copyright (C) 2011-12 John Crispin <blogic at openwrt.org>
+  */
+ 
+ #include <linux/kernel.h>
+@@ -30,11 +30,16 @@
+ #include <linux/mm.h>
+ #include <linux/platform_device.h>
+ #include <linux/ethtool.h>
++#include <linux/if_vlan.h>
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/io.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_irq.h>
++#include <linux/of_platform.h>
+ 
+ #include <asm/checksum.h>
+ 
+@@ -42,7 +47,7 @@
+ #include <xway_dma.h>
+ #include <lantiq_platform.h>
+ 
+-#define LTQ_ETOP_MDIO		0x11804
++#define LTQ_ETOP_MDIO_ACC	0x11804
+ #define MDIO_REQUEST		0x80000000
+ #define MDIO_READ		0x40000000
+ #define MDIO_ADDR_MASK		0x1f
+@@ -51,44 +56,91 @@
+ #define MDIO_REG_OFFSET		0x10
+ #define MDIO_VAL_MASK		0xffff
+ 
+-#define PPE32_CGEN		0x800
+-#define LQ_PPE32_ENET_MAC_CFG	0x1840
++#define LTQ_ETOP_MDIO_CFG       0x11800
++#define MDIO_CFG_MASK           0x6
++
++#define LTQ_ETOP_CFG            0x11808
++#define LTQ_ETOP_IGPLEN         0x11820
++#define LTQ_ETOP_MAC_CFG	0x11840
+ 
+ #define LTQ_ETOP_ENETS0		0x11850
+ #define LTQ_ETOP_MAC_DA0	0x1186C
+ #define LTQ_ETOP_MAC_DA1	0x11870
+-#define LTQ_ETOP_CFG		0x16020
+-#define LTQ_ETOP_IGPLEN		0x16080
++
++#define MAC_CFG_MASK		0xfff
++#define MAC_CFG_CGEN		(1 << 11)
++#define MAC_CFG_DUPLEX		(1 << 2)
++#define MAC_CFG_SPEED		(1 << 1)
++#define MAC_CFG_LINK		(1 << 0)
+ 
+ #define MAX_DMA_CHAN		0x8
+ #define MAX_DMA_CRC_LEN		0x4
+ #define MAX_DMA_DATA_LEN	0x600
+ 
+ #define ETOP_FTCU		BIT(28)
+-#define ETOP_MII_MASK		0xf
+-#define ETOP_MII_NORMAL		0xd
+-#define ETOP_MII_REVERSE	0xe
+ #define ETOP_PLEN_UNDER		0x40
+-#define ETOP_CGEN		0x800
++#define ETOP_CFG_MII0		0x01
+ 
+-/* use 2 static channels for TX/RX */
+-#define LTQ_ETOP_TX_CHANNEL	1
+-#define LTQ_ETOP_RX_CHANNEL	6
+-#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
+-#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
++#define ETOP_CFG_MASK           0xfff
++#define ETOP_CFG_FEN0		(1 << 8)
++#define ETOP_CFG_SEN0		(1 << 6)
++#define ETOP_CFG_OFF1		(1 << 3)
++#define ETOP_CFG_REMII0		(1 << 1)
++#define ETOP_CFG_OFF0		(1 << 0)
++
++#define LTQ_GBIT_MDIO_CTL	0xCC
++#define LTQ_GBIT_MDIO_DATA	0xd0
++#define LTQ_GBIT_GCTL0		0x68
++#define LTQ_GBIT_PMAC_HD_CTL	0x8c
++#define LTQ_GBIT_P0_CTL		0x4
++#define LTQ_GBIT_PMAC_RX_IPG	0xa8
++#define LTQ_GBIT_RGMII_CTL	0x78
++
++#define PMAC_HD_CTL_AS		(1 << 19)
++#define PMAC_HD_CTL_RXSH	(1 << 22)
++
++/* Switch Enable (0=disable, 1=enable) */
++#define GCTL0_SE		0x80000000
++/* Disable MDIO auto polling (0=disable, 1=enable) */
++#define PX_CTL_DMDIO		0x00400000
++
++/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */
++#define MDC_CLOCK_MASK		0xff000000
++#define MDC_CLOCK_OFFSET	24
++
++/* register information for the gbit's MDIO bus */
++#define MDIO_XR9_REQUEST	0x00008000
++#define MDIO_XR9_READ		0x00000800
++#define MDIO_XR9_WRITE		0x00000400
++#define MDIO_XR9_REG_MASK	0x1f
++#define MDIO_XR9_ADDR_MASK	0x1f
++#define MDIO_XR9_RD_MASK	0xffff
++#define MDIO_XR9_REG_OFFSET	0
++#define MDIO_XR9_ADDR_OFFSET	5
++#define MDIO_XR9_WR_OFFSET	16
+ 
++#define LTQ_DMA_ETOP	((of_machine_is_compatible("lantiq,ase")) ? \
++			(INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
++
++/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
+ #define ltq_etop_r32(x)		ltq_r32(ltq_etop_membase + (x))
+ #define ltq_etop_w32(x, y)	ltq_w32(x, ltq_etop_membase + (y))
+ #define ltq_etop_w32_mask(x, y, z)	\
+ 		ltq_w32_mask(x, y, ltq_etop_membase + (z))
+ 
+-#define DRV_VERSION	"1.0"
++#define ltq_gbit_r32(x)		ltq_r32(ltq_gbit_membase + (x))
++#define ltq_gbit_w32(x, y)	ltq_w32(x, ltq_gbit_membase + (y))
++#define ltq_gbit_w32_mask(x, y, z)	\
++		ltq_w32_mask(x, y, ltq_gbit_membase + (z))
++
++#define DRV_VERSION	"1.2"
+ 
+ static void __iomem *ltq_etop_membase;
++static void __iomem *ltq_gbit_membase;
+ 
+ struct ltq_etop_chan {
+-	int idx;
+ 	int tx_free;
++	int irq;
+ 	struct net_device *netdev;
+ 	struct napi_struct napi;
+ 	struct ltq_dma_channel dma;
+@@ -98,22 +150,35 @@ struct ltq_etop_chan {
+ struct ltq_etop_priv {
+ 	struct net_device *netdev;
+ 	struct platform_device *pdev;
+-	struct ltq_eth_data *pldata;
+ 	struct resource *res;
+ 
+ 	struct mii_bus *mii_bus;
+ 	struct phy_device *phydev;
+ 
+-	struct ltq_etop_chan ch[MAX_DMA_CHAN];
+-	int tx_free[MAX_DMA_CHAN >> 1];
++	struct ltq_etop_chan txch;
++	struct ltq_etop_chan rxch;
++
++	int tx_irq;
++	int rx_irq;
++
++	unsigned char mac[6];
++	int mii_mode;
+ 
+ 	spinlock_t lock;
++
++	struct clk *clk_ppe;
++	struct clk *clk_switch;
++	struct clk *clk_ephy;
++	struct clk *clk_ephycgu;
+ };
+ 
++static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
++				int phy_reg, u16 phy_data);
++
+ static int
+ ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
+ {
+-	ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
++	ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
+ 	if (!ch->skb[ch->dma.desc])
+ 		return -ENOMEM;
+ 	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+@@ -148,8 +213,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
+ 	spin_unlock_irqrestore(&priv->lock, flags);
+ 
+ 	skb_put(skb, len);
++	skb->dev = ch->netdev;
+ 	skb->protocol = eth_type_trans(skb, ch->netdev);
+ 	netif_receive_skb(skb);
++	ch->netdev->stats.rx_packets++;
++	ch->netdev->stats.rx_bytes += len;
+ }
+ 
+ static int
+@@ -157,8 +225,10 @@ ltq_etop_poll_rx(struct napi_struct *nap
+ {
+ 	struct ltq_etop_chan *ch = container_of(napi,
+ 				struct ltq_etop_chan, napi);
++	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ 	int rx = 0;
+ 	int complete = 0;
++	unsigned long flags;
+ 
+ 	while ((rx < budget) && !complete) {
+ 		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+@@ -172,7 +242,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
+ 	}
+ 	if (complete || !rx) {
+ 		napi_complete(&ch->napi);
++		spin_lock_irqsave(&priv->lock, flags);
+ 		ltq_dma_ack_irq(&ch->dma);
++		spin_unlock_irqrestore(&priv->lock, flags);
+ 	}
+ 	return rx;
+ }
+@@ -184,12 +256,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
+ 		container_of(napi, struct ltq_etop_chan, napi);
+ 	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ 	struct netdev_queue *txq =
+-		netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
++		netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
+ 	unsigned long flags;
+ 
+ 	spin_lock_irqsave(&priv->lock, flags);
+ 	while ((ch->dma.desc_base[ch->tx_free].ctl &
+ 			(LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++		ch->netdev->stats.tx_packets++;
++		ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len;
+ 		dev_kfree_skb_any(ch->skb[ch->tx_free]);
+ 		ch->skb[ch->tx_free] = NULL;
+ 		memset(&ch->dma.desc_base[ch->tx_free], 0,
+@@ -202,7 +276,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
+ 	if (netif_tx_queue_stopped(txq))
+ 		netif_tx_start_queue(txq);
+ 	napi_complete(&ch->napi);
++	spin_lock_irqsave(&priv->lock, flags);
+ 	ltq_dma_ack_irq(&ch->dma);
++	spin_unlock_irqrestore(&priv->lock, flags);
+ 	return 1;
+ }
+ 
+@@ -210,9 +286,10 @@ static irqreturn_t
+ ltq_etop_dma_irq(int irq, void *_priv)
+ {
+ 	struct ltq_etop_priv *priv = _priv;
+-	int ch = irq - LTQ_DMA_CH0_INT;
+-
+-	napi_schedule(&priv->ch[ch].napi);
++	if (irq == priv->txch.dma.irq)
++		napi_schedule(&priv->txch.napi);
++	else
++		napi_schedule(&priv->rxch.napi);
+ 	return IRQ_HANDLED;
+ }
+ 
+@@ -224,7 +301,7 @@ ltq_etop_free_channel(struct net_device
+ 	ltq_dma_free(&ch->dma);
+ 	if (ch->dma.irq)
+ 		free_irq(ch->dma.irq, priv);
+-	if (IS_RX(ch->idx)) {
++	if (ch == &priv->txch) {
+ 		int desc;
+ 		for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+ 			dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+@@ -235,65 +312,133 @@ static void
+ ltq_etop_hw_exit(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+-	int i;
+ 
+-	ltq_pmu_disable(PMU_PPE);
+-	for (i = 0; i < MAX_DMA_CHAN; i++)
+-		if (IS_TX(i) || IS_RX(i))
+-			ltq_etop_free_channel(dev, &priv->ch[i]);
++	clk_disable(priv->clk_ppe);
++
++	if (of_machine_is_compatible("lantiq,ar9"))
++		clk_disable(priv->clk_switch);
++
++	if (of_machine_is_compatible("lantiq,ase")) {
++		clk_disable(priv->clk_ephy);
++		clk_disable(priv->clk_ephycgu);
++	}
++
++	ltq_etop_free_channel(dev, &priv->txch);
++	ltq_etop_free_channel(dev, &priv->rxch);
++}
++
++static void
++ltq_etop_gbit_init(struct net_device *dev)
++{
++	struct ltq_etop_priv *priv = netdev_priv(dev);
++
++	clk_enable(priv->clk_switch);
++
++	/* enable gbit port0 on the SoC */
++	ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL);
++
++	ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
++	/* disable MDIO auto polling mode */
++	ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
++	/* set 1522 packet size */
++	ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
++	/* disable pmac & dmac headers */
++	ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
++		LTQ_GBIT_PMAC_HD_CTL);
++	/* Due to traffic halt when burst length 8,
++		replace default IPG value with 0x3B */
++	ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
++	/* set mdc clock to 2.5 MHz */
++	ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET,
++		LTQ_GBIT_RGMII_CTL);
+ }
+ 
+ static int
+ ltq_etop_hw_init(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+-	int i;
++	int mii_mode = priv->mii_mode;
+ 
+-	ltq_pmu_enable(PMU_PPE);
++	clk_enable(priv->clk_ppe);
++
++	if (of_machine_is_compatible("lantiq,ar9")) {
++		ltq_etop_gbit_init(dev);
++		/* force the etops link to the gbit to MII */
++		mii_mode = PHY_INTERFACE_MODE_MII;
++	}
++	ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
++	ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
++			MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
+ 
+-	switch (priv->pldata->mii_mode) {
++	switch (mii_mode) {
+ 	case PHY_INTERFACE_MODE_RMII:
+-		ltq_etop_w32_mask(ETOP_MII_MASK,
+-			ETOP_MII_REVERSE, LTQ_ETOP_CFG);
++		ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_REMII0 | ETOP_CFG_OFF1 |
++			ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
+ 		break;
+ 
+ 	case PHY_INTERFACE_MODE_MII:
+-		ltq_etop_w32_mask(ETOP_MII_MASK,
+-			ETOP_MII_NORMAL, LTQ_ETOP_CFG);
++		ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_OFF1 |
++			ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
+ 		break;
+ 
+ 	default:
++		if (of_machine_is_compatible("lantiq,ase")) {
++			clk_enable(priv->clk_ephy);
++			/* disable external MII */
++			ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
++			/* enable clock for internal PHY */
++			clk_enable(priv->clk_ephycgu);
++			/* we need to write this magic to the internal phy to
++			   make it work */
++			ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
++			pr_info("Selected EPHY mode\n");
++			break;
++		}
+ 		netdev_err(dev, "unknown mii mode %d\n",
+-			priv->pldata->mii_mode);
++			mii_mode);
+ 		return -ENOTSUPP;
+ 	}
+ 
+-	/* enable crc generation */
+-	ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
++	return 0;
++}
++
++static int
++ltq_etop_dma_init(struct net_device *dev)
++{
++	struct ltq_etop_priv *priv = netdev_priv(dev);
++	int tx = priv->tx_irq - LTQ_DMA_ETOP;
++	int rx = priv->rx_irq - LTQ_DMA_ETOP;
++	int err;
+ 
+ 	ltq_dma_init_port(DMA_PORT_ETOP);
+ 
+-	for (i = 0; i < MAX_DMA_CHAN; i++) {
+-		int irq = LTQ_DMA_CH0_INT + i;
+-		struct ltq_etop_chan *ch = &priv->ch[i];
+-
+-		ch->idx = ch->dma.nr = i;
+-
+-		if (IS_TX(i)) {
+-			ltq_dma_alloc_tx(&ch->dma);
+-			request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
+-		} else if (IS_RX(i)) {
+-			ltq_dma_alloc_rx(&ch->dma);
+-			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+-					ch->dma.desc++)
+-				if (ltq_etop_alloc_skb(ch))
+-					return -ENOMEM;
+-			ch->dma.desc = 0;
+-			request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
++	priv->txch.dma.nr = tx;
++	ltq_dma_alloc_tx(&priv->txch.dma);
++	err = request_irq(priv->tx_irq, ltq_etop_dma_irq, 0, "eth_tx", priv);
++	if (err) {
++		netdev_err(dev, "failed to allocate tx irq\n");
++		goto err_out;
++	}
++	priv->txch.dma.irq = priv->tx_irq;
++
++	priv->rxch.dma.nr = rx;
++	ltq_dma_alloc_rx(&priv->rxch.dma);
++	for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
++			priv->rxch.dma.desc++) {
++		if (ltq_etop_alloc_skb(&priv->rxch)) {
++			netdev_err(dev, "failed to allocate skbs\n");
++			err = -ENOMEM;
++			goto err_out;
+ 		}
+-		ch->dma.irq = irq;
+ 	}
+-	return 0;
++	priv->rxch.dma.desc = 0;
++	err = request_irq(priv->rx_irq, ltq_etop_dma_irq, 0, "eth_rx", priv);
++	if (err)
++		netdev_err(dev, "failed to allocate rx irq\n");
++	else
++		priv->rxch.dma.irq = priv->rx_irq;
++err_out:
++	return err;
+ }
+ 
+ static void
+@@ -309,7 +454,10 @@ ltq_etop_get_settings(struct net_device
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 
+-	return phy_ethtool_gset(priv->phydev, cmd);
++	if (priv->phydev)
++		return phy_ethtool_gset(priv->phydev, cmd);
++	else
++		return 0;
+ }
+ 
+ static int
+@@ -317,7 +465,10 @@ ltq_etop_set_settings(struct net_device
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 
+-	return phy_ethtool_sset(priv->phydev, cmd);
++	if (priv->phydev)
++		return phy_ethtool_sset(priv->phydev, cmd);
++	else
++		return 0;
+ }
+ 
+ static int
+@@ -325,7 +476,10 @@ ltq_etop_nway_reset(struct net_device *d
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 
+-	return phy_start_aneg(priv->phydev);
++	if (priv->phydev)
++		return phy_start_aneg(priv->phydev);
++	else
++		return 0;
+ }
+ 
+ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+@@ -336,6 +490,39 @@ static const struct ethtool_ops ltq_etop
+ };
+ 
+ static int
++ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
++		int phy_reg, u16 phy_data)
++{
++	u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
++		(phy_data << MDIO_XR9_WR_OFFSET) |
++		((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++		((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++		;
++	ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++		;
++	return 0;
++}
++
++static int
++ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++	u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
++		((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++		((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++		;
++	ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++		;
++	val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
++	return val;
++}
++
++static int
+ ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+ {
+ 	u32 val = MDIO_REQUEST |
+@@ -343,9 +530,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
+ 		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
+ 		phy_data;
+ 
+-	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
++	while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
+ 		;
+-	ltq_etop_w32(val, LTQ_ETOP_MDIO);
++	ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
+ 	return 0;
+ }
+ 
+@@ -356,12 +543,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
+ 		((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+ 		((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
+ 
+-	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
++	while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
+ 		;
+-	ltq_etop_w32(val, LTQ_ETOP_MDIO);
+-	while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
++	ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
++	while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
+ 		;
+-	val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
++	val = ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_VAL_MASK;
+ 	return val;
+ }
+ 
+@@ -376,14 +563,18 @@ ltq_etop_mdio_probe(struct net_device *d
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+ 	struct phy_device *phydev = NULL;
+-	int phy_addr;
++	u32 phy_supported =  (SUPPORTED_10baseT_Half
++			| SUPPORTED_10baseT_Full
++			| SUPPORTED_100baseT_Half
++			| SUPPORTED_100baseT_Full
++			| SUPPORTED_Autoneg
++			| SUPPORTED_MII
++			| SUPPORTED_TP);
+ 
+-	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+-		if (priv->mii_bus->phy_map[phy_addr]) {
+-			phydev = priv->mii_bus->phy_map[phy_addr];
+-			break;
+-		}
+-	}
++	if (of_machine_is_compatible("lantiq,ase"))
++		phydev = priv->mii_bus->phy_map[8];
++	else
++		phydev = priv->mii_bus->phy_map[0];
+ 
+ 	if (!phydev) {
+ 		netdev_err(dev, "no PHY found\n");
+@@ -391,21 +582,18 @@ ltq_etop_mdio_probe(struct net_device *d
+ 	}
+ 
+ 	phydev = phy_connect(dev, dev_name(&phydev->dev),
+-			     &ltq_etop_mdio_link, priv->pldata->mii_mode);
++			&ltq_etop_mdio_link, priv->mii_mode);
+ 
+ 	if (IS_ERR(phydev)) {
+ 		netdev_err(dev, "Could not attach to PHY\n");
+ 		return PTR_ERR(phydev);
+ 	}
+ 
+-	phydev->supported &= (SUPPORTED_10baseT_Half
+-			      | SUPPORTED_10baseT_Full
+-			      | SUPPORTED_100baseT_Half
+-			      | SUPPORTED_100baseT_Full
+-			      | SUPPORTED_Autoneg
+-			      | SUPPORTED_MII
+-			      | SUPPORTED_TP);
++	if (of_machine_is_compatible("lantiq,ar9"))
++		phy_supported |= SUPPORTED_1000baseT_Half
++			| SUPPORTED_1000baseT_Full;
+ 
++	phydev->supported &= phy_supported;
+ 	phydev->advertising = phydev->supported;
+ 	priv->phydev = phydev;
+ 	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+@@ -430,8 +618,13 @@ ltq_etop_mdio_init(struct net_device *de
+ 	}
+ 
+ 	priv->mii_bus->priv = dev;
+-	priv->mii_bus->read = ltq_etop_mdio_rd;
+-	priv->mii_bus->write = ltq_etop_mdio_wr;
++	if (of_machine_is_compatible("lantiq,ar9")) {
++		priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
++		priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
++	} else {
++		priv->mii_bus->read = ltq_etop_mdio_rd;
++		priv->mii_bus->write = ltq_etop_mdio_wr;
++	}
+ 	priv->mii_bus->name = "ltq_mii";
+ 	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+ 		priv->pdev->name, priv->pdev->id);
+@@ -480,17 +673,19 @@ static int
+ ltq_etop_open(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+-	int i;
++	unsigned long flags;
+ 
+-	for (i = 0; i < MAX_DMA_CHAN; i++) {
+-		struct ltq_etop_chan *ch = &priv->ch[i];
++	napi_enable(&priv->txch.napi);
++	napi_enable(&priv->rxch.napi);
++
++	spin_lock_irqsave(&priv->lock, flags);
++	ltq_dma_open(&priv->txch.dma);
++	ltq_dma_open(&priv->rxch.dma);
++	spin_unlock_irqrestore(&priv->lock, flags);
++
++	if (priv->phydev)
++		phy_start(priv->phydev);
+ 
+-		if (!IS_TX(i) && (!IS_RX(i)))
+-			continue;
+-		ltq_dma_open(&ch->dma);
+-		napi_enable(&ch->napi);
+-	}
+-	phy_start(priv->phydev);
+ 	netif_tx_start_all_queues(dev);
+ 	return 0;
+ }
+@@ -499,18 +694,19 @@ static int
+ ltq_etop_stop(struct net_device *dev)
+ {
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+-	int i;
++	unsigned long flags;
+ 
+ 	netif_tx_stop_all_queues(dev);
+-	phy_stop(priv->phydev);
+-	for (i = 0; i < MAX_DMA_CHAN; i++) {
+-		struct ltq_etop_chan *ch = &priv->ch[i];
+-
+-		if (!IS_RX(i) && !IS_TX(i))
+-			continue;
+-		napi_disable(&ch->napi);
+-		ltq_dma_close(&ch->dma);
+-	}
++	if (priv->phydev)
++		phy_stop(priv->phydev);
++	napi_disable(&priv->txch.napi);
++	napi_disable(&priv->rxch.napi);
++
++	spin_lock_irqsave(&priv->lock, flags);
++	ltq_dma_close(&priv->txch.dma);
++	ltq_dma_close(&priv->rxch.dma);
++	spin_unlock_irqrestore(&priv->lock, flags);
++
+ 	return 0;
+ }
+ 
+@@ -520,16 +716,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
+ 	int queue = skb_get_queue_mapping(skb);
+ 	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+ 	struct ltq_etop_priv *priv = netdev_priv(dev);
+-	struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+-	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+-	int len;
++	struct ltq_dma_desc *desc =
++		&priv->txch.dma.desc_base[priv->txch.dma.desc];
+ 	unsigned long flags;
+ 	u32 byte_offset;
++	int len;
+ 
+ 	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+ 
+-	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+-		dev_kfree_skb_any(skb);
++	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
++			priv->txch.skb[priv->txch.dma.desc]) {
+ 		netdev_err(dev, "tx ring full\n");
+ 		netif_tx_stop_queue(txq);
+ 		return NETDEV_TX_BUSY;
+@@ -537,7 +733,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
+ 
+ 	/* dma needs to start on a 16 byte aligned address */
+ 	byte_offset = CPHYSADDR(skb->data) % 16;
+-	ch->skb[ch->dma.desc] = skb;
++	priv->txch.skb[priv->txch.dma.desc] = skb;
+ 
+ 	dev->trans_start = jiffies;
+ 
+@@ -547,11 +743,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
+ 	wmb();
+ 	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+ 		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+-	ch->dma.desc++;
+-	ch->dma.desc %= LTQ_DESC_NUM;
++	priv->txch.dma.desc++;
++	priv->txch.dma.desc %= LTQ_DESC_NUM;
+ 	spin_unlock_irqrestore(&priv->lock, flags);
+ 
+-	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
++	if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
+ 		netif_tx_stop_queue(txq);
+ 
+ 	return NETDEV_TX_OK;
+@@ -566,8 +762,10 @@ ltq_etop_change_mtu(struct net_device *d
+ 		struct ltq_etop_priv *priv = netdev_priv(dev);
+ 		unsigned long flags;
+ 
++		int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
++
+ 		spin_lock_irqsave(&priv->lock, flags);
+-		ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
++		ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max,
+ 			LTQ_ETOP_IGPLEN);
+ 		spin_unlock_irqrestore(&priv->lock, flags);
+ 	}
+@@ -638,6 +836,9 @@ ltq_etop_init(struct net_device *dev)
+ 	if (err)
+ 		goto err_hw;
+ 	ltq_etop_change_mtu(dev, 1500);
++	err = ltq_etop_dma_init(dev);
++	if (err)
++		goto err_hw;
+ 
+ 	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
+ 	if (!is_valid_ether_addr(mac.sa_data)) {
+@@ -655,9 +856,10 @@ ltq_etop_init(struct net_device *dev)
+ 		dev->addr_assign_type = NET_ADDR_RANDOM;
+ 
+ 	ltq_etop_set_multicast_list(dev);
+-	err = ltq_etop_mdio_init(dev);
+-	if (err)
+-		goto err_netdev;
++	if (!ltq_etop_mdio_init(dev))
++		dev->ethtool_ops = &ltq_etop_ethtool_ops;
++	else
++		pr_warn("etop: mdio probe failed\n");;
+ 	return 0;
+ 
+ err_netdev:
+@@ -677,6 +879,9 @@ ltq_etop_tx_timeout(struct net_device *d
+ 	err = ltq_etop_hw_init(dev);
+ 	if (err)
+ 		goto err_hw;
++	err = ltq_etop_dma_init(dev);
++	if (err)
++		goto err_hw;
+ 	dev->trans_start = jiffies;
+ 	netif_wake_queue(dev);
+ 	return;
+@@ -700,14 +905,19 @@ static const struct net_device_ops ltq_e
+ 	.ndo_tx_timeout = ltq_etop_tx_timeout,
+ };
+ 
+-static int __init
+-ltq_etop_probe(struct platform_device *pdev)
++static int ltq_etop_probe(struct platform_device *pdev)
+ {
+ 	struct net_device *dev;
+ 	struct ltq_etop_priv *priv;
+-	struct resource *res;
++	struct resource *res, *gbit_res, irqres[2];
++	const u8 *mac;
+ 	int err;
+-	int i;
++
++	err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2);
++	if (err != 2) {
++		dev_err(&pdev->dev, "failed to get etop irqs\n");
++		return -EINVAL;
++	}
+ 
+ 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ 	if (!res) {
+@@ -733,30 +943,61 @@ ltq_etop_probe(struct platform_device *p
+ 		goto err_out;
+ 	}
+ 
+-	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+-	if (!dev) {
+-		err = -ENOMEM;
+-		goto err_out;
++	if (of_machine_is_compatible("lantiq,ar9")) {
++		gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++		if (!gbit_res) {
++			dev_err(&pdev->dev, "failed to get gbit resource\n");
++			err = -ENOENT;
++			goto err_out;
++		}
++		ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
++			gbit_res->start, resource_size(gbit_res));
++		if (!ltq_gbit_membase) {
++			dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
++				pdev->id);
++			err = -ENOMEM;
++			goto err_out;
++		}
+ 	}
++
++	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+ 	strcpy(dev->name, "eth%d");
+ 	dev->netdev_ops = &ltq_eth_netdev_ops;
+-	dev->ethtool_ops = &ltq_etop_ethtool_ops;
+ 	priv = netdev_priv(dev);
+ 	priv->res = res;
+ 	priv->pdev = pdev;
+-	priv->pldata = dev_get_platdata(&pdev->dev);
+ 	priv->netdev = dev;
++	priv->tx_irq = irqres[0].start;
++	priv->rx_irq = irqres[1].start;
++	priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
++
++	mac = of_get_mac_address(pdev->dev.of_node);
++	if (mac)
++		memcpy(priv->mac, mac, ETH_ALEN);
++
++	priv->clk_ppe = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(priv->clk_ppe))
++		return PTR_ERR(priv->clk_ppe);
++	if (of_machine_is_compatible("lantiq,ar9")) {
++		priv->clk_switch = clk_get(&pdev->dev, "switch");
++		if (IS_ERR(priv->clk_switch))
++			return PTR_ERR(priv->clk_switch);
++	}
++	if (of_machine_is_compatible("lantiq,ase")) {
++		priv->clk_ephy = clk_get(&pdev->dev, "ephy");
++		if (IS_ERR(priv->clk_ephy))
++			return PTR_ERR(priv->clk_ephy);
++		priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
++		if (IS_ERR(priv->clk_ephycgu))
++			return PTR_ERR(priv->clk_ephycgu);
++	}
++
+ 	spin_lock_init(&priv->lock);
+ 
+-	for (i = 0; i < MAX_DMA_CHAN; i++) {
+-		if (IS_TX(i))
+-			netif_napi_add(dev, &priv->ch[i].napi,
+-				ltq_etop_poll_tx, 8);
+-		else if (IS_RX(i))
+-			netif_napi_add(dev, &priv->ch[i].napi,
+-				ltq_etop_poll_rx, 32);
+-		priv->ch[i].netdev = dev;
+-	}
++	netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
++	netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
++	priv->txch.netdev = dev;
++	priv->rxch.netdev = dev;
+ 
+ 	err = register_netdev(dev);
+ 	if (err)
+@@ -785,31 +1026,22 @@ ltq_etop_remove(struct platform_device *
+ 	return 0;
+ }
+ 
++static const struct of_device_id ltq_etop_match[] = {
++	{ .compatible = "lantiq,etop-xway" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ltq_etop_match);
++
+ static struct platform_driver ltq_mii_driver = {
++	.probe = ltq_etop_probe,
+ 	.remove = ltq_etop_remove,
+ 	.driver = {
+ 		.name = "ltq_etop",
++		.of_match_table = ltq_etop_match,
+ 	},
+ };
+ 
+-int __init
+-init_ltq_etop(void)
+-{
+-	int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
+-
+-	if (ret)
+-		pr_err("ltq_etop: Error registering platform driver!");
+-	return ret;
+-}
+-
+-static void __exit
+-exit_ltq_etop(void)
+-{
+-	platform_driver_unregister(&ltq_mii_driver);
+-}
+-
+-module_init(init_ltq_etop);
+-module_exit(exit_ltq_etop);
++module_platform_driver(ltq_mii_driver);
+ 
+ MODULE_AUTHOR("John Crispin <blogic at openwrt.org>");
+ MODULE_DESCRIPTION("Lantiq SoC ETOP");
diff --git a/target/linux/lantiq/patches-4.4/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-4.4/0030-GPIO-add-named-gpio-exports.patch
new file mode 100644
index 0000000..2e27918
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0030-GPIO-add-named-gpio-exports.patch
@@ -0,0 +1,166 @@
+From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Tue, 12 Aug 2014 20:49:27 +0200
+Subject: [PATCH 30/36] GPIO: add named gpio exports
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/gpio/gpiolib-of.c     |   68 +++++++++++++++++++++++++++++++++++++++++
+ drivers/gpio/gpiolib.c        |   11 +++++--
+ include/asm-generic/gpio.h    |    5 +++
+ include/linux/gpio/consumer.h |    8 +++++
+ 4 files changed, 90 insertions(+), 2 deletions(-)
+
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -23,6 +23,8 @@
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
+ #include <linux/gpio/machine.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+ 
+ #include "gpiolib.h"
+ 
+@@ -450,3 +452,69 @@ void of_gpiochip_remove(struct gpio_chip
+ 	gpiochip_remove_pin_ranges(chip);
+ 	of_node_put(chip->of_node);
+ }
++
++static struct of_device_id gpio_export_ids[] = {
++	{ .compatible = "gpio-export" },
++	{ /* sentinel */ }
++};
++
++static int __init of_gpio_export_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	struct device_node *cnp;
++	u32 val;
++	int nb = 0;
++
++	for_each_child_of_node(np, cnp) {
++		const char *name = NULL;
++		int gpio;
++		bool dmc;
++		int max_gpio = 1;
++		int i;
++
++		of_property_read_string(cnp, "gpio-export,name", &name);
++
++		if (!name)
++			max_gpio = of_gpio_count(cnp);
++
++		for (i = 0; i < max_gpio; i++) {
++			unsigned flags = 0;
++			enum of_gpio_flags of_flags;
++
++			gpio = of_get_gpio_flags(cnp, i, &of_flags);
++
++			if (of_flags == OF_GPIO_ACTIVE_LOW)
++				flags |= GPIOF_ACTIVE_LOW;
++
++			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++			else
++				flags |= GPIOF_IN;
++
++			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++				continue;
++
++			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++			gpio_export_with_name(gpio, dmc, name);
++			nb++;
++		}
++	}
++
++	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++	return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++	.driver		= {
++		.name		= "gpio-export",
++		.owner	= THIS_MODULE,
++		.of_match_table	= of_match_ptr(gpio_export_ids),
++	},
++};
++
++static int __init of_gpio_export_init(void)
++{
++	return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
++}
++device_initcall(of_gpio_export_init);
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned g
+ 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ }
+ 
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
++{
++	return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
++}
++
+ static inline int gpio_export_link(struct device *dev, const char *name,
+ 				   unsigned gpio)
+ {
+--- a/include/linux/gpio/consumer.h
++++ b/include/linux/gpio/consumer.h
+@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get
+ 
+ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+ 
++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+ int gpiod_export_link(struct device *dev, const char *name,
+ 		      struct gpio_desc *desc);
+@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de
+ 
+ #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+ 
++static inline int _gpiod_export(struct gpio_desc *desc,
++			       bool direction_may_change,
++			       const char *name)
++{
++	return -ENOSYS;
++}
++
+ static inline int gpiod_export(struct gpio_desc *desc,
+ 			       bool direction_may_change)
+ {
+--- a/drivers/gpio/gpiolib-sysfs.c
++++ b/drivers/gpio/gpiolib-sysfs.c
+@@ -544,7 +544,7 @@ static struct class gpio_class = {
+  *
+  * Returns zero on success, else an error.
+  */
+-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ 	struct gpio_chip	*chip;
+ 	struct gpiod_data	*data;
+@@ -604,6 +604,8 @@ int gpiod_export(struct gpio_desc *desc,
+ 	offset = gpio_chip_hwgpio(desc);
+ 	if (chip->names && chip->names[offset])
+ 		ioname = chip->names[offset];
++	if (name)
++		ioname = name;
+ 
+ 	dev = device_create_with_groups(&gpio_class, chip->dev,
+ 					MKDEV(0, 0), data, gpio_groups,
+@@ -625,6 +627,12 @@ err_unlock:
+ 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ 	return status;
+ }
++EXPORT_SYMBOL_GPL(__gpiod_export);
++
++int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++{
++	return __gpiod_export(desc, direction_may_change, NULL);
++}
+ EXPORT_SYMBOL_GPL(gpiod_export);
+ 
+ static int match_export(struct device *dev, const void *desc)
diff --git a/target/linux/lantiq/patches-4.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-4.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
new file mode 100644
index 0000000..a9ae084
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@@ -0,0 +1,1034 @@
+From f17e50f67fa3c77624edf2ca03fae0d50f0ce39b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 7 Aug 2014 18:26:42 +0200
+Subject: [PATCH 31/36] I2C: MIPS: lantiq: add FALC-ON i2c bus master
+
+This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
+
+Signed-off-by: Thomas Langer <thomas.langer at lantiq.com>
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ drivers/i2c/busses/Kconfig      |   10 +
+ drivers/i2c/busses/Makefile     |    1 +
+ drivers/i2c/busses/i2c-lantiq.c |  747 +++++++++++++++++++++++++++++++++++++++
+ drivers/i2c/busses/i2c-lantiq.h |  234 ++++++++++++
+ 4 files changed, 992 insertions(+)
+ create mode 100644 drivers/i2c/busses/i2c-lantiq.c
+ create mode 100644 drivers/i2c/busses/i2c-lantiq.h
+
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -639,6 +639,16 @@ config I2C_MESON
+ 	  If you say yes to this option, support will be included for the
+ 	  I2C interface on the Amlogic Meson family of SoCs.
+ 
++config I2C_LANTIQ
++	tristate "Lantiq I2C interface"
++	depends on LANTIQ && SOC_FALCON
++	help
++	  If you say yes to this option, support will be included for the
++	  Lantiq I2C core.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called i2c-lantiq.
++
+ config I2C_MPC
+ 	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
+ 	depends on PPC
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -59,6 +59,7 @@ obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
+ obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
+ obj-$(CONFIG_I2C_JZ4780)	+= i2c-jz4780.o
+ obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o
++obj-$(CONFIG_I2C_LANTIQ)	+= i2c-lantiq.o
+ obj-$(CONFIG_I2C_LPC2K)		+= i2c-lpc2k.o
+ obj-$(CONFIG_I2C_MESON)		+= i2c-meson.o
+ obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-lantiq.c
+@@ -0,0 +1,747 @@
++
++/*
++ * Lantiq I2C bus adapter
++ *
++ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ * Copyright (C) 2012 Thomas Langer <thomas.langer at lantiq.com>
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/slab.h> /* for kzalloc, kfree */
++#include <linux/i2c.h>
++#include <linux/errno.h>
++#include <linux/completion.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/of_irq.h>
++#include <linux/of_i2c.h>
++
++#include <lantiq_soc.h>
++#include "i2c-lantiq.h"
++
++/*
++ * CURRENT ISSUES:
++ * - no high speed support
++ * - ten bit mode is not tested (no slave devices)
++ */
++
++/* access macros */
++#define i2c_r32(reg)	\
++	__raw_readl(&(priv->membase)->reg)
++#define i2c_w32(val, reg)	\
++	__raw_writel(val, &(priv->membase)->reg)
++#define i2c_w32_mask(clear, set, reg)	\
++	i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg)
++
++#define DRV_NAME "i2c-lantiq"
++#define DRV_VERSION "1.00"
++
++#define LTQ_I2C_BUSY_TIMEOUT		20 /* ms */
++
++#ifdef DEBUG
++#define LTQ_I2C_XFER_TIMEOUT		(25*HZ)
++#else
++#define LTQ_I2C_XFER_TIMEOUT		HZ
++#endif
++
++#define LTQ_I2C_IMSC_DEFAULT_MASK	(I2C_IMSC_I2C_P_INT_EN | \
++					 I2C_IMSC_I2C_ERR_INT_EN)
++
++#define LTQ_I2C_ARB_LOST		(1 << 0)
++#define LTQ_I2C_NACK			(1 << 1)
++#define LTQ_I2C_RX_UFL			(1 << 2)
++#define LTQ_I2C_RX_OFL			(1 << 3)
++#define LTQ_I2C_TX_UFL			(1 << 4)
++#define LTQ_I2C_TX_OFL			(1 << 5)
++
++struct ltq_i2c {
++	struct mutex mutex;
++
++
++	/* active clock settings */
++	unsigned int input_clock;	/* clock input for i2c hardware block */
++	unsigned int i2c_clock;		/* approximated bus clock in kHz */
++
++	struct clk *clk_gate;
++	struct clk *clk_input;
++
++
++	/* resources (memory and interrupts) */
++	int irq_lb;				/* last burst irq */
++
++	struct lantiq_reg_i2c __iomem *membase;	/* base of mapped registers */
++
++	struct i2c_adapter adap;
++	struct device *dev;
++
++	struct completion cmd_complete;
++
++
++	/* message transfer data */
++	struct i2c_msg *current_msg;	/* current message */
++	int msgs_num;		/* number of messages to handle */
++	u8 *msg_buf;		/* current buffer */
++	u32 msg_buf_len;	/* remaining length of current buffer */
++	int msg_err;		/* error status of the current transfer */
++
++
++	/* master status codes */
++	enum {
++		STATUS_IDLE,
++		STATUS_ADDR,	/* address phase */
++		STATUS_WRITE,
++		STATUS_READ,
++		STATUS_READ_END,
++		STATUS_STOP
++	} status;
++};
++
++static irqreturn_t ltq_i2c_isr(int irq, void *dev_id);
++
++static inline void enable_burst_irq(struct ltq_i2c *priv)
++{
++	i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
++}
++static inline void disable_burst_irq(struct ltq_i2c *priv)
++{
++	i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
++}
++
++static void prepare_msg_send_addr(struct ltq_i2c *priv)
++{
++	struct i2c_msg *msg = priv->current_msg;
++	int rd = !!(msg->flags & I2C_M_RD);	/* extends to 0 or 1 */
++	u16 addr = msg->addr;
++
++	/* new i2c_msg */
++	priv->msg_buf = msg->buf;
++	priv->msg_buf_len = msg->len;
++	if (rd)
++		priv->status = STATUS_READ;
++	else
++		priv->status = STATUS_WRITE;
++
++	/* send slave address */
++	if (msg->flags & I2C_M_TEN) {
++		i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
++		i2c_w32(addr & 0xff, txd);
++	} else {
++		i2c_w32((addr & 0x7f) << 1 | rd, txd);
++	}
++}
++
++static void ltq_i2c_set_tx_len(struct ltq_i2c *priv)
++{
++	struct i2c_msg *msg = priv->current_msg;
++	int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
++
++	pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T');
++
++	priv->status = STATUS_ADDR;
++
++	if (!(msg->flags & I2C_M_RD))
++		len += msg->len;
++	else
++		/* set maximum received packet size (before rx int!) */
++		i2c_w32(msg->len, mrps_ctrl);
++	i2c_w32(len, tps_ctrl);
++	enable_burst_irq(priv);
++}
++
++static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap)
++{
++	struct ltq_i2c *priv = i2c_get_adapdata(adap);
++	unsigned int input_clock = clk_get_rate(priv->clk_input);
++	u32 dec, inc = 1;
++
++	/* clock changed? */
++	if (priv->input_clock == input_clock)
++		return 0;
++
++	/*
++	 * this formula is only an approximation, found by the recommended
++	 * values in the "I2C Architecture Specification 1.7.1"
++	 */
++	dec = input_clock / (priv->i2c_clock * 2);
++	if (dec <= 6)
++		return -ENXIO;
++
++	i2c_w32(0, fdiv_high_cfg);
++	i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) |
++		(dec << I2C_FDIV_CFG_DEC_OFFSET),
++		fdiv_cfg);
++
++	dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n",
++		input_clock, priv->i2c_clock, dec);
++
++	priv->input_clock = input_clock;
++	return 0;
++}
++
++static int ltq_i2c_hw_init(struct i2c_adapter *adap)
++{
++	int ret = 0;
++	struct ltq_i2c *priv = i2c_get_adapdata(adap);
++
++	/* disable bus */
++	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++#ifndef DEBUG
++	/* set normal operation clock divider */
++	i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
++#else
++	/* for debugging a higher divider value! */
++	i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
++#endif
++
++	/* setup clock */
++	ret = ltq_i2c_hw_set_clock(adap);
++	if (ret != 0) {
++		dev_warn(priv->dev, "invalid clock settings\n");
++		return ret;
++	}
++
++	/* configure fifo */
++	i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
++		I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
++		I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
++		I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
++		I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
++		I2C_FIFO_CFG_RXBS_RXBS0,  /* rx fifo burst size is 1 word */
++		fifo_cfg);
++
++	/* configure address */
++	i2c_w32(I2C_ADDR_CFG_SOPE_EN |	/* generate stop when no more data in
++					   the fifo */
++		I2C_ADDR_CFG_SONA_EN |	/* generate stop when NA received */
++		I2C_ADDR_CFG_MnS_EN |	/* we are master device */
++		0,			/* our slave address (not used!) */
++		addr_cfg);
++
++	/* enable bus */
++	i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
++
++	return 0;
++}
++
++static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv)
++{
++	unsigned long timeout;
++
++	timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT);
++
++	do {
++		u32 stat = i2c_r32(bus_stat);
++
++		if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE)
++			return 0;
++
++		cond_resched();
++	} while (!time_after_eq(jiffies, timeout));
++
++	dev_err(priv->dev, "timeout waiting for bus ready\n");
++	return -ETIMEDOUT;
++}
++
++static void ltq_i2c_tx(struct ltq_i2c *priv, int last)
++{
++	if (priv->msg_buf_len && priv->msg_buf) {
++		i2c_w32(*priv->msg_buf, txd);
++
++		if (--priv->msg_buf_len)
++			priv->msg_buf++;
++		else
++			priv->msg_buf = NULL;
++	} else {
++		last = 1;
++	}
++
++	if (last)
++		disable_burst_irq(priv);
++}
++
++static void ltq_i2c_rx(struct ltq_i2c *priv, int last)
++{
++	u32 fifo_stat, timeout;
++	if (priv->msg_buf_len && priv->msg_buf) {
++		timeout = 5000000;
++		do {
++			fifo_stat = i2c_r32(ffs_stat);
++		} while (!fifo_stat && --timeout);
++		if (!timeout) {
++			last = 1;
++			pr_debug("\nrx timeout\n");
++			goto err;
++		}
++		while (fifo_stat) {
++			*priv->msg_buf = i2c_r32(rxd);
++			if (--priv->msg_buf_len) {
++				priv->msg_buf++;
++			} else {
++				priv->msg_buf = NULL;
++				last = 1;
++				break;
++			}
++			/*
++			 * do not read more than burst size, otherwise no "last
++			 * burst" is generated and the transaction is blocked!
++			 */
++			fifo_stat = 0;
++		}
++	} else {
++		last = 1;
++	}
++err:
++	if (last) {
++		disable_burst_irq(priv);
++
++		if (priv->status == STATUS_READ_END) {
++			/* 
++			 * do the STATUS_STOP and complete() here, as sometimes
++			 * the tx_end is already seen before this is finished
++			 */
++			priv->status = STATUS_STOP;
++			complete(&priv->cmd_complete);
++		} else {
++			i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++			priv->status = STATUS_READ_END;
++		}
++	}
++}
++
++static void ltq_i2c_xfer_init(struct ltq_i2c *priv)
++{
++	/* enable interrupts */
++	i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc);
++
++	/* trigger transfer of first msg */
++	ltq_i2c_set_tx_len(priv);
++}
++
++static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
++{
++#if defined(DEBUG)
++	int i, j;
++	pr_debug("Messages %d %s\n", num, rx ? "out" : "in");
++	for (i = 0; i < num; i++) {
++		pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i,
++			(msgs[i].flags & I2C_M_RD) ? 'R' : 'T',
++			msgs[i].len, msgs[i].addr);
++		if (!(msgs[i].flags & I2C_M_RD) || rx) {
++			for (j = 0; j < msgs[i].len; j++)
++				pr_debug("%02X ", msgs[i].buf[j]);
++		}
++		pr_debug("\n");
++	}
++#endif
++}
++
++static void ltq_i2c_release_bus(struct ltq_i2c *priv)
++{
++	if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
++		i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++}
++
++static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
++			   int num)
++{
++	struct ltq_i2c *priv = i2c_get_adapdata(adap);
++	int ret;
++
++	dev_dbg(priv->dev, "xfer %u messages\n", num);
++	dump_msgs(msgs, num, 0);
++
++	mutex_lock(&priv->mutex);
++
++	init_completion(&priv->cmd_complete);
++	priv->current_msg = msgs;
++	priv->msgs_num = num;
++	priv->msg_err = 0;
++	priv->status = STATUS_IDLE;
++
++	/* wait for the bus to become ready */
++	ret = ltq_i2c_wait_bus_not_busy(priv);
++	if (ret)
++		goto done;
++
++	while (priv->msgs_num) {
++		/* start the transfers */
++		ltq_i2c_xfer_init(priv);
++
++		/* wait for transfers to complete */
++		ret = wait_for_completion_interruptible_timeout(
++			&priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT);
++		if (ret == 0) {
++			dev_err(priv->dev, "controller timed out\n");
++			ltq_i2c_hw_init(adap);
++			ret = -ETIMEDOUT;
++			goto done;
++		} else if (ret < 0)
++			goto done;
++
++		if (priv->msg_err) {
++			if (priv->msg_err & LTQ_I2C_NACK)
++				ret = -ENXIO;
++			else
++				ret = -EREMOTEIO;
++			goto done;
++		}
++		if (--priv->msgs_num)
++			priv->current_msg++;
++	}
++	/* no error? */
++	ret = num;
++
++done:
++	ltq_i2c_release_bus(priv);
++
++	mutex_unlock(&priv->mutex);
++
++	if (ret >= 0)
++		dump_msgs(msgs, num, 1);
++
++	pr_debug("XFER ret %d\n", ret);
++	return ret;
++}
++
++static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id)
++{
++	struct ltq_i2c *priv = dev_id;
++	struct i2c_msg *msg = priv->current_msg;
++	int last = (irq == priv->irq_lb);
++
++	if (last)
++		pr_debug("LB ");
++	else
++		pr_debug("B ");
++
++	if (msg->flags & I2C_M_RD) {
++		switch (priv->status) {
++		case STATUS_ADDR:
++			pr_debug("X");
++			prepare_msg_send_addr(priv);
++			disable_burst_irq(priv);
++			break;
++		case STATUS_READ:
++		case STATUS_READ_END:
++			pr_debug("R");
++			ltq_i2c_rx(priv, last);
++			break;
++		default:
++			disable_burst_irq(priv);
++			pr_warn("Status R %d\n", priv->status);
++			break;
++		}
++	} else {
++		switch (priv->status) {
++		case STATUS_ADDR:
++			pr_debug("x");
++			prepare_msg_send_addr(priv);
++			break;
++		case STATUS_WRITE:
++			pr_debug("w");
++			ltq_i2c_tx(priv, last);
++			break;
++		default:
++			disable_burst_irq(priv);
++			pr_warn("Status W %d\n", priv->status);
++			break;
++		}
++	}
++
++	i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
++	return IRQ_HANDLED;
++}
++
++static void ltq_i2c_isr_prot(struct ltq_i2c *priv)
++{
++	u32 i_pro = i2c_r32(p_irqss);
++
++	pr_debug("i2c-p");
++
++	/* not acknowledge */
++	if (i_pro & I2C_P_IRQSS_NACK) {
++		priv->msg_err |= LTQ_I2C_NACK;
++		pr_debug(" nack");
++	}
++
++	/* arbitration lost */
++	if (i_pro & I2C_P_IRQSS_AL) {
++		priv->msg_err |= LTQ_I2C_ARB_LOST;
++		pr_debug(" arb-lost");
++	}
++	/* tx -> rx switch */
++	if (i_pro & I2C_P_IRQSS_RX)
++		pr_debug(" rx");
++
++	/* tx end */
++	if (i_pro & I2C_P_IRQSS_TX_END)
++		pr_debug(" txend");
++	pr_debug("\n");
++
++	if (!priv->msg_err) {
++		/* tx -> rx switch */
++		if (i_pro & I2C_P_IRQSS_RX) {
++			priv->status = STATUS_READ;
++			enable_burst_irq(priv);
++		}
++		if (i_pro & I2C_P_IRQSS_TX_END) {
++			if (priv->status == STATUS_READ)
++				priv->status = STATUS_READ_END;
++			else {
++				disable_burst_irq(priv);
++				priv->status = STATUS_STOP;
++			}
++		}
++	}
++
++	i2c_w32(i_pro, p_irqsc);
++}
++
++static irqreturn_t ltq_i2c_isr(int irq, void *dev_id)
++{
++	u32 i_raw, i_err = 0;
++	struct ltq_i2c *priv = dev_id;
++
++	i_raw = i2c_r32(mis);
++	pr_debug("i_raw 0x%08X\n", i_raw);
++
++	/* error interrupt */
++	if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
++		i_err = i2c_r32(err_irqss);
++		pr_debug("i_err 0x%08X bus_stat 0x%04X\n",
++			i_err, i2c_r32(bus_stat));
++
++		/* tx fifo overflow (8) */
++		if (i_err & I2C_ERR_IRQSS_TXF_OFL)
++			priv->msg_err |= LTQ_I2C_TX_OFL;
++
++		/* tx fifo underflow (4) */
++		if (i_err & I2C_ERR_IRQSS_TXF_UFL)
++			priv->msg_err |= LTQ_I2C_TX_UFL;
++
++		/* rx fifo overflow (2) */
++		if (i_err & I2C_ERR_IRQSS_RXF_OFL)
++			priv->msg_err |= LTQ_I2C_RX_OFL;
++
++		/* rx fifo underflow (1) */
++		if (i_err & I2C_ERR_IRQSS_RXF_UFL)
++			priv->msg_err |= LTQ_I2C_RX_UFL;
++
++		i2c_w32(i_err, err_irqsc);
++	}
++
++	/* protocol interrupt */
++	if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
++		ltq_i2c_isr_prot(priv);
++
++	if ((priv->msg_err) || (priv->status == STATUS_STOP))
++		complete(&priv->cmd_complete);
++
++	return IRQ_HANDLED;
++}
++
++static u32 ltq_i2c_functionality(struct i2c_adapter *adap)
++{
++	return	I2C_FUNC_I2C |
++		I2C_FUNC_10BIT_ADDR |
++		I2C_FUNC_SMBUS_EMUL;
++}
++
++static struct i2c_algorithm ltq_i2c_algorithm = {
++	.master_xfer	= ltq_i2c_xfer,
++	.functionality	= ltq_i2c_functionality,
++};
++
++static int __devinit ltq_i2c_probe(struct platform_device *pdev)
++{
++	struct device_node *node = pdev->dev.of_node;
++	struct ltq_i2c *priv;
++	struct i2c_adapter *adap;
++	struct resource *mmres, irqres[4];
++	int ret = 0;
++
++	dev_dbg(&pdev->dev, "probing\n");
++
++	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	ret = of_irq_to_resource_table(node, irqres, 4);
++	if (!mmres || (ret != 4)) {
++		dev_err(&pdev->dev, "no resources\n");
++		return -ENODEV;
++	}
++
++	/* allocate private data */
++	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++	if (!priv) {
++		dev_err(&pdev->dev, "can't allocate private data\n");
++		return -ENOMEM;
++	}
++
++	adap = &priv->adap;
++	i2c_set_adapdata(adap, priv);
++	adap->owner = THIS_MODULE;
++	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++	strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
++	adap->algo = &ltq_i2c_algorithm;
++
++	if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) {
++		dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n");
++		priv->i2c_clock = 100000;
++	}
++
++	init_completion(&priv->cmd_complete);
++	mutex_init(&priv->mutex);
++
++	priv->membase = devm_request_and_ioremap(&pdev->dev, mmres);
++	if (priv->membase == NULL)
++		return -ENOMEM;
++
++	priv->dev = &pdev->dev;
++	priv->irq_lb = irqres[0].start;
++
++	ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst,
++		0x0, "i2c lb", priv);
++	if (ret) {
++		dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
++			irqres[0].start);
++		return -ENODEV;
++	}
++
++	ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst,
++		0x0, "i2c b", priv);
++	if (ret) {
++		dev_err(&pdev->dev, "can't get burst IRQ %d\n",
++			irqres[1].start);
++		return -ENODEV;
++	}
++
++	ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr,
++		0x0, "i2c err", priv);
++	if (ret) {
++		dev_err(&pdev->dev, "can't get error IRQ %d\n",
++			irqres[2].start);
++		return -ENODEV;
++	}
++
++	ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr,
++		0x0, "i2c p", priv);
++	if (ret) {
++		dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
++			irqres[3].start);
++		return -ENODEV;
++	}
++
++	dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
++	dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start,
++		irqres[1].start, irqres[2].start, irqres[3].start);
++
++	priv->clk_gate = devm_clk_get(&pdev->dev, NULL);
++	if (IS_ERR(priv->clk_gate)) {
++		dev_err(&pdev->dev, "failed to get i2c clk\n");
++		return -ENOENT;
++	}
++
++	/* this is a static clock, which has no refcounting */
++	priv->clk_input = clk_get_fpi();
++	if (IS_ERR(priv->clk_input)) {
++		dev_err(&pdev->dev, "failed to get fpi clk\n");
++		return -ENOENT;
++	}
++
++	clk_activate(priv->clk_gate);
++
++	/* add our adapter to the i2c stack */
++	ret = i2c_add_numbered_adapter(adap);
++	if (ret) {
++		dev_err(&pdev->dev, "can't register I2C adapter\n");
++		goto out;
++	}
++
++	platform_set_drvdata(pdev, priv);
++	i2c_set_adapdata(adap, priv);
++
++	/* print module version information */
++	dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
++		(i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
++		(i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
++
++	/* initialize HW */
++	ret = ltq_i2c_hw_init(adap);
++	if (ret) {
++		dev_err(&pdev->dev, "can't configure adapter\n");
++		i2c_del_adapter(adap);
++		platform_set_drvdata(pdev, NULL);
++	} else {
++		dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
++	}
++
++	of_i2c_register_devices(adap);
++
++out:
++	/* if init failed, we need to deactivate the clock gate */
++	if (ret)
++		clk_deactivate(priv->clk_gate);
++
++	return ret;
++}
++
++static int __devexit ltq_i2c_remove(struct platform_device *pdev)
++{
++	struct ltq_i2c *priv = platform_get_drvdata(pdev);
++
++	/* disable bus */
++	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++	/* power down the core */
++	clk_deactivate(priv->clk_gate);
++
++	/* remove driver */
++	i2c_del_adapter(&priv->adap);
++	kfree(priv);
++
++	dev_dbg(&pdev->dev, "removed\n");
++	platform_set_drvdata(pdev, NULL);
++
++	return 0;
++}
++static const struct of_device_id ltq_i2c_match[] = {
++	{ .compatible = "lantiq,lantiq-i2c" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ltq_i2c_match);
++
++static struct platform_driver ltq_i2c_driver = {
++	.probe	= ltq_i2c_probe,
++	.remove	= __devexit_p(ltq_i2c_remove),
++	.driver	= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++		.of_match_table = ltq_i2c_match,
++	},
++};
++
++module_platform_driver(ltq_i2c_driver);
++
++MODULE_DESCRIPTION("Lantiq I2C bus adapter");
++MODULE_AUTHOR("Thomas Langer <thomas.langer at lantiq.com>");
++MODULE_ALIAS("platform:" DRV_NAME);
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-lantiq.h
+@@ -0,0 +1,234 @@
++#ifndef I2C_LANTIQ_H
++#define I2C_LANTIQ_H
++
++/* I2C register structure */
++struct lantiq_reg_i2c {
++	/* I2C Kernel Clock Control Register */
++	unsigned int clc; /* 0x00000000 */
++	/* Reserved */
++	unsigned int res_0; /* 0x00000004 */
++	/* I2C Identification Register */
++	unsigned int id; /* 0x00000008 */
++	/* Reserved */
++	unsigned int res_1; /* 0x0000000C */
++	/*
++	 * I2C RUN Control Register
++	 * This register enables and disables the I2C peripheral. Before
++	 * enabling, the I2C has to be configured properly. After enabling
++	 * no configuration is possible
++	 */
++	unsigned int run_ctrl; /* 0x00000010 */
++	/*
++	 * I2C End Data Control Register
++	 * This register is used to either turn around the data transmission
++	 * direction or to address another slave without sending a stop
++	 * condition. Also the software can stop the slave-transmitter by
++	 * sending a not-accolade when working as master-receiver or even
++	 * stop data transmission immediately when operating as
++	 * master-transmitter. The writing to the bits of this control
++	 * register is only effective when in MASTER RECEIVES BYTES, MASTER
++	 * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
++	 */
++	unsigned int endd_ctrl; /* 0x00000014 */
++	/*
++	 * I2C Fractional Divider Configuration Register
++	 * These register is used to program the fractional divider of the I2C
++	 * bus. Before the peripheral is switched on by setting the RUN-bit the
++	 * two (fixed) values for the two operating frequencies are programmed
++	 * into these (configuration) registers. The Register FDIV_HIGH_CFG has
++	 * the same layout as I2C_FDIV_CFG.
++	 */
++	unsigned int fdiv_cfg; /* 0x00000018 */
++	/*
++	 * I2C Fractional Divider (highspeed mode) Configuration Register
++	 * These register is used to program the fractional divider of the I2C
++	 * bus. Before the peripheral is switched on by setting the RUN-bit the
++	 * two (fixed) values for the two operating frequencies are programmed
++	 * into these (configuration) registers. The Register FDIV_CFG has the
++	 * same layout as I2C_FDIV_CFG.
++	 */
++	unsigned int fdiv_high_cfg; /* 0x0000001C */
++	/* I2C Address Configuration Register */
++	unsigned int addr_cfg; /* 0x00000020 */
++	/* I2C Bus Status Register
++	 * This register gives a status information of the I2C. This additional
++	 * information can be used by the software to start proper actions.
++	 */
++	unsigned int bus_stat; /* 0x00000024 */
++	/* I2C FIFO Configuration Register */
++	unsigned int fifo_cfg; /* 0x00000028 */
++	/* I2C Maximum Received Packet Size Register */
++	unsigned int mrps_ctrl; /* 0x0000002C */
++	/* I2C Received Packet Size Status Register */
++	unsigned int rps_stat; /* 0x00000030 */
++	/* I2C Transmit Packet Size Register */
++	unsigned int tps_ctrl; /* 0x00000034 */
++	/* I2C Filled FIFO Stages Status Register */
++	unsigned int ffs_stat; /* 0x00000038 */
++	/* Reserved */
++	unsigned int res_2; /* 0x0000003C */
++	/* I2C Timing Configuration Register */
++	unsigned int tim_cfg; /* 0x00000040 */
++	/* Reserved */
++	unsigned int res_3[7]; /* 0x00000044 */
++	/* I2C Error Interrupt Request Source Mask Register */
++	unsigned int err_irqsm; /* 0x00000060 */
++	/* I2C Error Interrupt Request Source Status Register */
++	unsigned int err_irqss; /* 0x00000064 */
++	/* I2C Error Interrupt Request Source Clear Register */
++	unsigned int err_irqsc; /* 0x00000068 */
++	/* Reserved */
++	unsigned int res_4; /* 0x0000006C */
++	/* I2C Protocol Interrupt Request Source Mask Register */
++	unsigned int p_irqsm; /* 0x00000070 */
++	/* I2C Protocol Interrupt Request Source Status Register */
++	unsigned int p_irqss; /* 0x00000074 */
++	/* I2C Protocol Interrupt Request Source Clear Register */
++	unsigned int p_irqsc; /* 0x00000078 */
++	/* Reserved */
++	unsigned int res_5; /* 0x0000007C */
++	/* I2C Raw Interrupt Status Register */
++	unsigned int ris; /* 0x00000080 */
++	/* I2C Interrupt Mask Control Register */
++	unsigned int imsc; /* 0x00000084 */
++	/* I2C Masked Interrupt Status Register */
++	unsigned int mis; /* 0x00000088 */
++	/* I2C Interrupt Clear Register */
++	unsigned int icr; /* 0x0000008C */
++	/* I2C Interrupt Set Register */
++	unsigned int isr; /* 0x00000090 */
++	/* I2C DMA Enable Register */
++	unsigned int dmae; /* 0x00000094 */
++	/* Reserved */
++	unsigned int res_6[8154]; /* 0x00000098 */
++	/* I2C Transmit Data Register */
++	unsigned int txd; /* 0x00008000 */
++	/* Reserved */
++	unsigned int res_7[4095]; /* 0x00008004 */
++	/* I2C Receive Data Register */
++	unsigned int rxd; /* 0x0000C000 */
++	/* Reserved */
++	unsigned int res_8[4095]; /* 0x0000C004 */
++};
++
++/*
++ * Clock Divider for Normal Run Mode
++ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long
++ * as the new divider value RMC is not valid, the register returns 0x0000 00xx
++ * on reading.
++ */
++#define I2C_CLC_RMC_MASK 0x0000FF00
++/* field offset */
++#define I2C_CLC_RMC_OFFSET 8
++
++/* Fields of "I2C Identification Register" */
++/* Module ID */
++#define I2C_ID_ID_MASK 0x0000FF00
++/* field offset */
++#define I2C_ID_ID_OFFSET 8
++/* Revision */
++#define I2C_ID_REV_MASK 0x000000FF
++/* field offset */
++#define I2C_ID_REV_OFFSET 0
++
++/* Fields of "I2C Interrupt Mask Control Register" */
++/* Enable */
++#define I2C_IMSC_BREQ_INT_EN 0x00000008
++/* Enable */
++#define I2C_IMSC_LBREQ_INT_EN 0x00000004
++
++/* Fields of "I2C Fractional Divider Configuration Register" */
++/* field offset */
++#define I2C_FDIV_CFG_INC_OFFSET 16
++
++/* Fields of "I2C Interrupt Mask Control Register" */
++/* Enable */
++#define I2C_IMSC_I2C_P_INT_EN 0x00000020
++/* Enable */
++#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
++
++/* Fields of "I2C Error Interrupt Request Source Status Register" */
++/* TXF_OFL */
++#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
++/* TXF_UFL */
++#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
++/* RXF_OFL */
++#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
++/* RXF_UFL */
++#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
++
++/* Fields of "I2C Raw Interrupt Status Register" */
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
++
++/* Fields of "I2C FIFO Configuration Register" */
++/* TX FIFO Flow Control */
++#define I2C_FIFO_CFG_TXFC 0x00020000
++/* RX FIFO Flow Control */
++#define I2C_FIFO_CFG_RXFC 0x00010000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
++/* 1 word */
++#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
++
++/* Fields of "I2C FIFO Configuration Register" */
++/* 1 word */
++#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
++/* Stop on Packet End Enable */
++#define I2C_ADDR_CFG_SOPE_EN 0x00200000
++/* Stop on Not Acknowledge Enable */
++#define I2C_ADDR_CFG_SONA_EN 0x00100000
++/* Enable */
++#define I2C_ADDR_CFG_MnS_EN 0x00080000
++
++/* Fields of "I2C Interrupt Clear Register" */
++/* Clear */
++#define I2C_ICR_BREQ_INT_CLR 0x00000008
++/* Clear */
++#define I2C_ICR_LBREQ_INT_CLR 0x00000004
++
++/* Fields of "I2C Fractional Divider Configuration Register" */
++/* field offset */
++#define I2C_FDIV_CFG_DEC_OFFSET 0
++
++/* Fields of "I2C Bus Status Register" */
++/* Bus Status */
++#define I2C_BUS_STAT_BS_MASK 0x00000003
++/* Read from I2C Bus. */
++#define I2C_BUS_STAT_RNW_READ 0x00000004
++/* I2C Bus is free. */
++#define I2C_BUS_STAT_BS_FREE 0x00000000
++/*
++ * The device is working as master and has claimed the control on the
++ * I2C-bus (busy master).
++ */
++#define I2C_BUS_STAT_BS_BM 0x00000002
++
++/* Fields of "I2C RUN Control Register" */
++/* Enable */
++#define I2C_RUN_CTRL_RUN_EN 0x00000001
++
++/* Fields of "I2C End Data Control Register" */
++/*
++ * Set End of Transmission
++ * Note:Do not write '1' to this bit when bus is free. This will cause an
++ * abort after the first byte when a new transfer is started.
++ */
++#define I2C_ENDD_CTRL_SETEND 0x00000002
++
++/* Fields of "I2C Protocol Interrupt Request Source Status Register" */
++/* NACK */
++#define I2C_P_IRQSS_NACK 0x00000010
++/* AL */
++#define I2C_P_IRQSS_AL 0x00000008
++/* RX */
++#define I2C_P_IRQSS_RX 0x00000040
++/* TX_END */
++#define I2C_P_IRQSS_TX_END 0x00000020
++
++
++#endif /* I2C_LANTIQ_H */
diff --git a/target/linux/lantiq/patches-4.4/0032-USB-fix-roothub-for-IFXHCD.patch b/target/linux/lantiq/patches-4.4/0032-USB-fix-roothub-for-IFXHCD.patch
new file mode 100644
index 0000000..1310e35
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0032-USB-fix-roothub-for-IFXHCD.patch
@@ -0,0 +1,31 @@
+From 326714a47233e4a524afa0c8398276fddf0dbd4d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 6 Dec 2012 19:59:53 +0100
+Subject: [PATCH 32/36] USB: fix roothub for IFXHCD
+
+---
+ arch/mips/lantiq/Kconfig |    1 +
+ drivers/usb/core/hub.c   |    2 +-
+ 2 files changed, 2 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -3,6 +3,7 @@ if LANTIQ
+ config SOC_TYPE_XWAY
+ 	bool
+ 	select PINCTRL_XWAY
++	select USB_ARCH_HAS_HCD
+ 	default n
+ 
+ choice
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -4337,7 +4337,7 @@ hub_port_init(struct usb_hub *hub, struc
+ 		udev->ttport = hdev->ttport;
+ 	} else if (udev->speed != USB_SPEED_HIGH
+ 			&& hdev->speed == USB_SPEED_HIGH) {
+-		if (!hub->tt.hub) {
++		if (hdev->parent && !hub->tt.hub) {
+ 			dev_err(&udev->dev, "parent hub has no TT\n");
+ 			retval = -EINVAL;
+ 			goto fail;
diff --git a/target/linux/lantiq/patches-4.4/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch b/target/linux/lantiq/patches-4.4/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
new file mode 100644
index 0000000..ddbe134
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
@@ -0,0 +1,45 @@
+From b1b9fca8c317afc3f2b78bb54f877e8a830a819d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Fri, 9 Aug 2013 18:47:27 +0200
+Subject: [PATCH 34/36] reset: Fix compile when reset RESET_CONTROLLER is not
+ selected
+
+Drivers need to protect their reset api calls with #ifdef to avoid compile
+errors.
+
+This patch adds dummy wrappers in the same way that linux/of.h does it.
+
+Cc: linux-kernel at vger.kernel.org
+Cc: Philipp Zabel <p.zabel at pengutronix.de>
+Cc: Gabor Juhos <juhosg at openwrt.org>
+---
+ include/linux/reset-controller.h |   16 ++++++++++++++
+ include/linux/reset.h            |   43 ++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 59 insertions(+)
+
+--- a/include/linux/reset-controller.h
++++ b/include/linux/reset-controller.h
+@@ -48,7 +48,23 @@ struct reset_controller_dev {
+ 	unsigned int nr_resets;
+ };
+ 
++#if defined(CONFIG_RESET_CONTROLLER)
++
+ int reset_controller_register(struct reset_controller_dev *rcdev);
+ void reset_controller_unregister(struct reset_controller_dev *rcdev);
+ 
++#else
++
++static inline int reset_controller_register(struct reset_controller_dev *rcdev)
++{
++	return -ENOSYS;
++}
++
++void reset_controller_unregister(struct reset_controller_dev *rcdev)
++{
++
++}
++
++#endif
++
+ #endif
diff --git a/target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
new file mode 100644
index 0000000..25852e2
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
@@ -0,0 +1,630 @@
+From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Wed, 10 Sep 2014 22:42:14 +0200
+Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h  |    6 +
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    3 +
+ arch/mips/lantiq/xway/Makefile                     |    3 +
+ arch/mips/lantiq/xway/ath_eep.c                    |  282 ++++++++++++++++++++
+ arch/mips/lantiq/xway/eth_mac.c                    |   76 ++++++
+ arch/mips/lantiq/xway/pci-ath-fixup.c              |  109 ++++++++
+ arch/mips/lantiq/xway/rt_eep.c                     |   60 +++++
+ 7 files changed, 539 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
+ create mode 100644 arch/mips/lantiq/xway/ath_eep.c
+ create mode 100644 arch/mips/lantiq/xway/eth_mac.c
+ create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
+ create mode 100644 arch/mips/lantiq/xway/rt_eep.c
+
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
+@@ -0,0 +1,6 @@
++#ifndef _PCI_ATH_FIXUP
++#define _PCI_ATH_FIXUP
++
++void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
++
++#endif /* _PCI_ATH_FIXUP */
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -104,5 +104,8 @@ int xrx200_gphy_boot(struct device *dev,
+ extern void ltq_pmu_enable(unsigned int module);
+ extern void ltq_pmu_disable(unsigned int module);
+ 
++/* allow the ethernet driver to load a flash mapped mac addr */
++const u8* ltq_get_eth_mac(void);
++
+ #endif /* CONFIG_SOC_TYPE_XWAY */
+ #endif /* _LTQ_XWAY_H__ */
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o
+ 
+ obj-y += vmmc.o tffs.o
+ 
++obj-y += eth_mac.o
++obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
++
+ obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
+--- /dev/null
++++ b/arch/mips/lantiq/xway/ath_eep.c
+@@ -0,0 +1,298 @@
++/*
++ *  Copyright (C) 2011 Luca Olivetti <luca at ventoso.org>
++ *  Copyright (C) 2011 John Crispin <blogic at openwrt.org>
++ *  Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0 at gmail.com>
++ *  Copyright (C) 2013 Álvaro Fernández Rojas <noltari at gmail.com>
++ *  Copyright (C) 2013 Daniel Gimpelevich <daniel at gimpelevich.san-francisco.ca.us>
++ *  Copyright (C) 2015 Vittorio Gambaletta <openwrt at vittgam.net>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/etherdevice.h>
++#include <linux/ath5k_platform.h>
++#include <linux/ath9k_platform.h>
++#include <linux/pci.h>
++#include <linux/err.h>
++#include <linux/mtd/mtd.h>
++#include <pci-ath-fixup.h>
++#include <lantiq_soc.h>
++
++extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
++struct ath5k_platform_data ath5k_pdata;
++struct ath9k_platform_data ath9k_pdata = {
++	.led_pin = -1,
++};
++static u8 athxk_eeprom_mac[6];
++
++static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
++{
++	dev->dev.platform_data = &ath9k_pdata;
++	return 0;
++}
++
++static int ath9k_eep_load;
++int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node, *mtd_np;
++	struct resource *eep_res, *mac_res = NULL;
++	void __iomem *eep, *mac;
++	int mac_offset, led_pin;
++	u32 mac_inc = 0, pci_slot = 0;
++	int i;
++	struct mtd_info *the_mtd;
++	size_t flash_readlen;
++	const __be32 *list;
++	const char *part;
++	phandle phandle;
++
++	if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
++			sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
++			(mtd_np = of_find_node_by_phandle(phandle)) && ((part =
++			of_get_property(mtd_np, "label", NULL)) || (part =
++			mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
++			!= ERR_PTR(-ENODEV)) {
++		i = mtd_read(the_mtd, be32_to_cpup(list),
++				ATH9K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
++				(void *) ath9k_pdata.eeprom_data);
++		if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
++			size_t mac_readlen;
++			mtd_read(the_mtd, mac_offset, 6, &mac_readlen,
++				(void *) athxk_eeprom_mac);
++		}
++		put_mtd_device(the_mtd);
++		if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) {
++			dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
++			return -ENODEV;
++		}
++	} else {
++		eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++		mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++		if (!eep_res) {
++			dev_err(&pdev->dev, "failed to load eeprom address\n");
++			return -ENODEV;
++		}
++		if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS << 1) {
++			dev_err(&pdev->dev, "eeprom has an invalid size\n");
++			return -EINVAL;
++		}
++
++		eep = ioremap(eep_res->start, resource_size(eep_res));
++		memcpy_fromio(ath9k_pdata.eeprom_data, eep,
++				ATH9K_PLAT_EEP_MAX_WORDS << 1);
++	}
++
++	if (of_find_property(np, "ath,eep-swap", NULL))
++		for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++)
++			ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]);
++
++	if (of_find_property(np, "ath,eep-endian", NULL)) {
++		ath9k_pdata.endian_check = true;
++
++		dev_info(&pdev->dev, "endian check enabled.\n");
++	}
++
++	if (!is_valid_ether_addr(athxk_eeprom_mac)) {
++		if (mac_res) {
++			if (resource_size(mac_res) != 6) {
++				dev_err(&pdev->dev, "mac has an invalid size\n");
++				return -EINVAL;
++			}
++			mac = ioremap(mac_res->start, resource_size(mac_res));
++			memcpy_fromio(athxk_eeprom_mac, mac, 6);
++		} else if (ltq_get_eth_mac()) {
++			memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
++		}
++	}
++	if (!is_valid_ether_addr(athxk_eeprom_mac)) {
++		dev_warn(&pdev->dev, "using random mac\n");
++		random_ether_addr(athxk_eeprom_mac);
++	}
++
++	if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
++		athxk_eeprom_mac[5] += mac_inc;
++
++	ath9k_pdata.macaddr = athxk_eeprom_mac;
++	ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
++
++	if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
++		ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
++
++		dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
++                if (ath9k_eep_load) {
++                        struct pci_dev *d = NULL;
++                        while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS,
++                                        PCI_ANY_ID, d)) != NULL)
++                                pci_fixup_device(pci_fixup_early, d);
++                }
++
++	}
++
++	if (!of_property_read_u32(np, "ath,led-pin", &led_pin)) {
++		ath9k_pdata.led_pin = led_pin;
++		dev_info(&pdev->dev, "using led pin %d.\n", led_pin);
++	}
++
++	if (of_property_read_bool(np, "ath,led-active-high")) {
++		ath9k_pdata.led_active_high = true;
++		dev_info(&pdev->dev, "inverted LED polarity\n");
++	}
++
++	if (of_property_read_bool(np, "ath,disable-2ghz")) {
++		ath9k_pdata.disable_2ghz = true;
++		dev_info(&pdev->dev, "disabled 2.4 GHz band\n");
++	}
++
++	if (of_property_read_bool(np, "ath,disable-5ghz")) {
++		ath9k_pdata.disable_5ghz = true;
++		dev_info(&pdev->dev, "disabled 5 GHz band\n");
++	}
++
++	dev_info(&pdev->dev, "loaded ath9k eeprom\n");
++
++	return 0;
++}
++
++static struct of_device_id ath9k_eeprom_ids[] = {
++	{ .compatible = "ath9k,eeprom" },
++	{ }
++};
++
++static struct platform_driver ath9k_eeprom_driver = {
++	.driver		= {
++		.name		= "ath9k,eeprom",
++		.owner	= THIS_MODULE,
++		.of_match_table	= of_match_ptr(ath9k_eeprom_ids),
++	},
++};
++
++static int __init of_ath9k_eeprom_init(void)
++{
++        int ret = platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
++
++        if (ret)
++                ath9k_eep_load = 1;
++
++        return ret;
++}
++
++static int __init of_ath9k_eeprom_init_late(void)
++{
++        if (!ath9k_eep_load)
++                return 0;
++        return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
++}
++late_initcall(of_ath9k_eeprom_init_late);
++subsys_initcall(of_ath9k_eeprom_init);
++
++
++static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
++{
++	dev->dev.platform_data = &ath5k_pdata;
++	return 0;
++}
++
++int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node, *mtd_np;
++	struct resource *eep_res, *mac_res = NULL;
++	void __iomem *eep, *mac;
++	int mac_offset;
++	u32 mac_inc = 0;
++	int i;
++	struct mtd_info *the_mtd;
++	size_t flash_readlen;
++	const __be32 *list;
++	const char *part;
++	phandle phandle;
++
++	if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
++			sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
++			(mtd_np = of_find_node_by_phandle(phandle)) && ((part =
++			of_get_property(mtd_np, "label", NULL)) || (part =
++			mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
++			!= ERR_PTR(-ENODEV)) {
++		i = mtd_read(the_mtd, be32_to_cpup(list),
++				ATH5K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
++				(void *) ath5k_pdata.eeprom_data);
++		put_mtd_device(the_mtd);
++		if ((sizeof(ATH5K_PLAT_EEP_MAX_WORDS << 1) != flash_readlen)
++				|| i) {
++			dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
++			return -ENODEV;
++		}
++	} else {
++		eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++		mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++		if (!eep_res) {
++			dev_err(&pdev->dev, "failed to load eeprom address\n");
++			return -ENODEV;
++		}
++		if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS << 1) {
++			dev_err(&pdev->dev, "eeprom has an invalid size\n");
++			return -EINVAL;
++		}
++
++		eep = ioremap(eep_res->start, resource_size(eep_res));
++		ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1,
++				GFP_KERNEL);
++		memcpy_fromio(ath5k_pdata.eeprom_data, eep,
++				ATH5K_PLAT_EEP_MAX_WORDS << 1);
++	}
++
++	if (of_find_property(np, "ath,eep-swap", NULL))
++		for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
++			ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
++
++	if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
++		memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6);
++	} else if (mac_res) {
++		if (resource_size(mac_res) != 6) {
++			dev_err(&pdev->dev, "mac has an invalid size\n");
++			return -EINVAL;
++		}
++		mac = ioremap(mac_res->start, resource_size(mac_res));
++		memcpy_fromio(athxk_eeprom_mac, mac, 6);
++	} else if (ltq_get_eth_mac())
++		memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
++	else {
++		dev_warn(&pdev->dev, "using random mac\n");
++		random_ether_addr(athxk_eeprom_mac);
++	}
++
++	if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
++		athxk_eeprom_mac[5] += mac_inc;
++
++	ath5k_pdata.macaddr = athxk_eeprom_mac;
++	ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
++
++	dev_info(&pdev->dev, "loaded ath5k eeprom\n");
++
++	return 0;
++}
++
++static struct of_device_id ath5k_eeprom_ids[] = {
++	{ .compatible = "ath5k,eeprom" },
++	{ }
++};
++
++static struct platform_driver ath5k_eeprom_driver = {
++	.driver		= {
++		.name		= "ath5k,eeprom",
++		.owner	= THIS_MODULE,
++		.of_match_table	= of_match_ptr(ath5k_eeprom_ids),
++	},
++};
++
++static int __init of_ath5k_eeprom_init(void)
++{
++	return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
++}
++device_initcall(of_ath5k_eeprom_init);
+--- /dev/null
++++ b/arch/mips/lantiq/xway/eth_mac.c
+@@ -0,0 +1,76 @@
++/*
++ *  Copyright (C) 2012 John Crispin <blogic at openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/if_ether.h>
++
++static u8 eth_mac[6];
++static int eth_mac_set;
++
++const u8* ltq_get_eth_mac(void)
++{
++	return eth_mac;
++}
++
++static int __init setup_ethaddr(char *str)
++{
++	eth_mac_set = mac_pton(str, eth_mac);
++	return !eth_mac_set;
++}
++__setup("ethaddr=", setup_ethaddr);
++
++int __init of_eth_mac_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	struct resource *mac_res;
++	void __iomem *mac;
++	u32 mac_inc = 0;
++
++	if (eth_mac_set) {
++		dev_err(&pdev->dev, "mac was already set by bootloader\n");
++		return -EINVAL;
++	}
++	mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++	if (!mac_res) {
++		dev_err(&pdev->dev, "failed to load mac\n");
++		return -EINVAL;
++	}
++	if (resource_size(mac_res) != 6) {
++		dev_err(&pdev->dev, "mac has an invalid size\n");
++		return -EINVAL;
++	}
++	mac = ioremap(mac_res->start, resource_size(mac_res));
++	memcpy_fromio(eth_mac, mac, 6);
++
++	if (!of_property_read_u32(np, "mac-increment", &mac_inc))
++		eth_mac[5] += mac_inc;
++
++	return 0;
++}
++
++static struct of_device_id eth_mac_ids[] = {
++	{ .compatible = "lantiq,eth-mac" },
++	{ /* sentinel */ }
++};
++
++static struct platform_driver eth_mac_driver = {
++	.driver		= {
++		.name		= "lantiq,eth-mac",
++		.owner	= THIS_MODULE,
++		.of_match_table	= of_match_ptr(eth_mac_ids),
++	},
++};
++
++static int __init of_eth_mac_init(void)
++{
++	return platform_driver_probe(&eth_mac_driver, of_eth_mac_probe);
++}
++device_initcall(of_eth_mac_init);
+--- /dev/null
++++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
+@@ -0,0 +1,118 @@
++/*
++ *  Atheros AP94 reference board PCI initialization
++ *
++ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg at openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <lantiq_soc.h>
++
++struct ath_fixup {
++	u16		*cal_data;
++	unsigned	slot;
++};
++
++static int ath_num_fixups;
++static struct ath_fixup ath_fixups[2];
++
++static void ath_pci_fixup(struct pci_dev *dev)
++{
++	void __iomem *mem;
++	struct pci_dev *bridge = pci_upstream_bridge(dev); 
++	u16 *cal_data = NULL;
++	u16 cmd;
++	u32 bar0;
++	u32 val;
++	u32 base;
++	unsigned i;
++
++	for (i = 0; i < ath_num_fixups; i++) {
++		if (ath_fixups[i].cal_data == NULL)
++			continue;
++
++		if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
++			continue;
++
++		cal_data = ath_fixups[i].cal_data;
++		break;
++	}
++
++	if (cal_data == NULL)
++		return;
++
++	if (*cal_data != 0xa55a) {
++		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
++		return;
++	}
++
++	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
++
++	base = dev->resource[0].start;
++	mem = ioremap(base, 0x10000);
++	if (!mem) {
++		pr_err("pci %s: ioremap error\n", pci_name(dev));
++		return;
++	}
++
++	if (bridge) {
++		pci_enable_device(dev);
++	}
++
++	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, base);
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++	pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++	/* set pointer to first reg address */
++	cal_data += 3;
++	while (*cal_data != 0xffff) {
++		u32 reg;
++		reg = *cal_data++;
++		val = *cal_data++;
++		val |= (*cal_data++) << 16;
++
++		ltq_w32(swab32(val), mem + reg);
++		udelay(100);
++	}
++
++	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
++	dev->vendor = val & 0xffff;
++	dev->device = (val >> 16) & 0xffff;
++
++	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
++	dev->revision = val & 0xff;
++	dev->class = val >> 8; /* upper 3 bytes */
++
++	pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n", 
++		pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
++
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
++	pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
++
++	if (bridge) {
++		pci_disable_device(dev);
++	}
++
++	iounmap(mem);
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
++
++void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
++{
++	if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
++		return;
++
++	ath_fixups[ath_num_fixups].slot = slot;
++	ath_fixups[ath_num_fixups].cal_data = cal_data;
++	ath_num_fixups++;
++}
+--- /dev/null
++++ b/arch/mips/lantiq/xway/rt_eep.c
+@@ -0,0 +1,60 @@
++/*
++ *  Copyright (C) 2011 John Crispin <blogic at openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/pci.h>
++#include <linux/platform_device.h>
++#include <linux/rt2x00_platform.h>
++
++extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
++static struct rt2x00_platform_data rt2x00_pdata;
++
++static int rt2x00_pci_plat_dev_init(struct pci_dev *dev)
++{
++	dev->dev.platform_data = &rt2x00_pdata;
++	return 0;
++}
++
++int __init of_ralink_eeprom_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	const char *eeprom;
++
++	if (of_property_read_string(np, "ralink,eeprom", &eeprom)) {
++		dev_err(&pdev->dev, "failed to load eeprom filename\n");
++		return 0;
++	}
++
++	rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
++//	rt2x00_pdata.mac_address = mac;
++	ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init;
++
++	dev_info(&pdev->dev, "using %s as eeprom\n", eeprom);
++
++	return 0;
++}
++
++static struct of_device_id ralink_eeprom_ids[] = {
++	{ .compatible = "ralink,eeprom" },
++	{ }
++};
++
++static struct platform_driver ralink_eeprom_driver = {
++	.driver		= {
++		.name		= "ralink,eeprom",
++		.owner	= THIS_MODULE,
++		.of_match_table	= of_match_ptr(ralink_eeprom_ids),
++	},
++};
++
++static int __init of_ralink_eeprom_init(void)
++{
++	return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
++}
++device_initcall(of_ralink_eeprom_init);
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -840,7 +840,11 @@ ltq_etop_init(struct net_device *dev)
+ 	if (err)
+ 		goto err_hw;
+ 
+-	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
++	if (priv->mac)
++		memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
++	else
++		memcpy(&mac.sa_data, ltq_get_eth_mac(), ETH_ALEN);
++
+ 	if (!is_valid_ether_addr(mac.sa_data)) {
+ 		pr_warn("etop: invalid MAC, using random\n");
+ 		eth_random_addr(mac.sa_data);
diff --git a/target/linux/lantiq/patches-4.4/0036-owrt-generic-dtb-image-hack.patch b/target/linux/lantiq/patches-4.4/0036-owrt-generic-dtb-image-hack.patch
new file mode 100644
index 0000000..7a306b3
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0036-owrt-generic-dtb-image-hack.patch
@@ -0,0 +1,32 @@
+From dba8578e06aedf1e67312ebfc6162e2fadc9448d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 7 Aug 2014 18:32:12 +0200
+Subject: [PATCH 36/36] owrt: generic dtb image hack
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+---
+ arch/mips/kernel/head.S |    3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -86,6 +86,9 @@ EXPORT(__image_cmdline)
+ 	.fill	0x400
+ #endif /* CONFIG_IMAGE_CMDLINE_HACK */
+ 
++	.ascii  "OWRTDTB:"
++	EXPORT(__image_dtb)
++	.fill   0x4000
+ 	__REF
+ 
+ NESTED(kernel_entry, 16, sp)			# kernel entry point
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -32,7 +32,6 @@ choice
+ config DT_EASY50712
+ 	bool "Easy50712"
+ 	depends on SOC_XWAY
+-	select BUILTIN_DTB
+ endchoice
+ 
+ config PCI_LANTIQ
diff --git a/target/linux/lantiq/patches-4.4/0040-USB-DWC2-enable-usb-power-gpio.patch b/target/linux/lantiq/patches-4.4/0040-USB-DWC2-enable-usb-power-gpio.patch
new file mode 100644
index 0000000..5f26784
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0040-USB-DWC2-enable-usb-power-gpio.patch
@@ -0,0 +1,35 @@
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -42,6 +42,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/of_device.h>
+ #include <linux/mutex.h>
++#include <linux/of_gpio.h>
+ #include <linux/platform_device.h>
+ #include <linux/phy/phy.h>
+ #include <linux/platform_data/s3c-hsotg.h>
+@@ -336,6 +337,7 @@ static int dwc2_driver_probe(struct plat
+ 	struct resource *res;
+ 	int retval;
+ 	int irq;
++	int gpio_count;
+ 
+ 	match = of_match_device(dwc2_of_match_table, &dev->dev);
+ 	if (match && match->data) {
+@@ -352,6 +354,16 @@ static int dwc2_driver_probe(struct plat
+ 		defparams.dma_desc_enable = 0;
+ 	}
+ 
++	gpio_count = of_gpio_count(dev->dev.of_node);
++	while (gpio_count > 0) {
++		enum of_gpio_flags flags;
++		int gpio = of_get_gpio_flags(dev->dev.of_node, --gpio_count, &flags);
++		if (gpio_request(gpio, "usb"))
++			continue;
++		dev_info(&dev->dev, "requested GPIO %d\n", gpio);
++		gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
++	}
++
+ 	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
+ 	if (!hsotg)
+ 		return -ENOMEM;
diff --git a/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch
new file mode 100644
index 0000000..ea3e48c
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch
@@ -0,0 +1,46 @@
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -145,6 +145,34 @@ static int __dwc2_lowlevel_hw_enable(str
+ 	return ret;
+ }
+ 
++static const struct dwc2_core_params params_ltq = {
++	.otg_cap			= 2,	/* non-HNP/non-SRP */
++	.otg_ver			= -1,
++	.dma_enable			= -1,
++	.dma_desc_enable		= -1,
++	.speed				= -1,
++	.enable_dynamic_fifo		= -1,
++	.en_multiple_tx_fifo		= -1,
++	.host_rx_fifo_size		= 288,	/* 288 DWORDs */
++	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
++	.host_perio_tx_fifo_size	= 96,	/* 96 DWORDs */
++	.max_transfer_size		= -1,
++	.max_packet_count		= 511,
++	.host_channels			= -1,
++	.phy_type			= -1,
++	.phy_utmi_width			= -1,
++	.phy_ulpi_ddr			= -1,
++	.phy_ulpi_ext_vbus		= -1,
++	.i2c_enable			= -1,
++	.ulpi_fs_ls			= -1,
++	.host_support_fs_ls_low_power	= -1,
++	.host_ls_low_power_phy_clk	= -1,
++	.ts_dline			= -1,
++	.reload_ctl			= -1,
++	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT,
++	.uframe_sched			= -1,
++};
++
+ /**
+  * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
+  * @hsotg: The driver state
+@@ -310,6 +338,8 @@ static int dwc2_driver_remove(struct pla
+ static const struct of_device_id dwc2_of_match_table[] = {
+ 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+ 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
++	{ .compatible = "lantiq,ifxhcd-arx100-dwc2", .data = &params_ltq },
++	{ .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = &params_ltq },
+ 	{ .compatible = "snps,dwc2", .data = NULL },
+ 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
+ 	{},
diff --git a/target/linux/lantiq/patches-4.4/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch b/target/linux/lantiq/patches-4.4/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
new file mode 100644
index 0000000..b7905f9
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
@@ -0,0 +1,1378 @@
+From be14811c03cf20c793fd176a347625335110b0e6 Mon Sep 17 00:00:00 2001
+From: Martin Schiller <mschiller at tdt.de>
+Date: Thu, 26 Nov 2015 11:00:07 +0100
+Subject: [PATCH] pinctrl/lantiq: introduce new dedicated devicetree bindings
+
+This patch introduces new dedicated "lantiq,<chip>-pinctrl" devicetree
+bindings, where <chip> is one of "ase", "danube", "xrx100", "xrx200" or
+"xrx300" and marks the "lantiq,pinctrl-xway", "lantiq,pinctrl-ase" and
+"lantiq,pinctrl-xr9" bindings as DEPRECATED.
+
+Based on the newest Lantiq Hardware Description it turend out, that there are
+some differences in the GPIO alternative functions of the Danube, xRX100 and
+xRX200 families, which makes it impossible to use only one xway_mfp table.
+
+This patch also adds support for the xRX300 family.
+
+Signed-off-by: Martin Schiller <mschiller at tdt.de>
+Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
+---
+ drivers/pinctrl/pinctrl-lantiq.h |    8 +
+ drivers/pinctrl/pinctrl-xway.c   | 1181 +++++++++++++++++++++++++++++++++-----
+ 2 files changed, 1059 insertions(+), 130 deletions(-)
+
+--- a/drivers/pinctrl/pinctrl-lantiq.h
++++ b/drivers/pinctrl/pinctrl-lantiq.h
+@@ -162,6 +162,14 @@ enum ltq_pin {
+ 	GPIO53,
+ 	GPIO54,
+ 	GPIO55,
++	GPIO56,
++	GPIO57,
++	GPIO58,
++	GPIO59,
++	GPIO60, /* 60 */
++	GPIO61,
++	GPIO62,
++	GPIO63,
+ 
+ 	GPIO64,
+ 	GPIO65,
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -7,6 +7,7 @@
+  *  publishhed by the Free Software Foundation.
+  *
+  *  Copyright (C) 2012 John Crispin <blogic at openwrt.org>
++ *  Copyright (C) 2015 Martin Schiller <mschiller at tdt.de>
+  */
+ 
+ #include <linux/err.h>
+@@ -24,7 +25,7 @@
+ 
+ #include <lantiq_soc.h>
+ 
+-/* we have 3 1/2 banks of 16 bit each */
++/* we have up to 4 banks of 16 bit each */
+ #define PINS			16
+ #define PORT3			3
+ #define PORT(x)			(x / PINS)
+@@ -35,7 +36,7 @@
+ #define MUX_ALT1	0x2
+ 
+ /*
+- * each bank has this offset apart from the 1/2 bank that is mixed into the
++ * each bank has this offset apart from the 4th bank that is mixed into the
+  * other 3 ranges
+  */
+ #define REG_OFF			0x30
+@@ -51,7 +52,7 @@
+ #define GPIO_PUDSEL(p)		(GPIO_BASE(p) + 0x1c)
+ #define GPIO_PUDEN(p)		(GPIO_BASE(p) + 0x20)
+ 
+-/* the 1/2 port needs special offsets for some registers */
++/* the 4th port needs special offsets for some registers */
+ #define GPIO3_OD		(GPIO_BASE(0) + 0x24)
+ #define GPIO3_PUDSEL		(GPIO_BASE(0) + 0x28)
+ #define GPIO3_PUDEN		(GPIO_BASE(0) + 0x2C)
+@@ -80,17 +81,18 @@
+ #define FUNC_MUX(f, m)		\
+ 	{ .func = f, .mux = XWAY_MUX_##m, }
+ 
+-#define XWAY_MAX_PIN		32
+-#define XR9_MAX_PIN		56
+-
+ enum xway_mux {
+ 	XWAY_MUX_GPIO = 0,
+ 	XWAY_MUX_SPI,
+ 	XWAY_MUX_ASC,
++	XWAY_MUX_USIF,
+ 	XWAY_MUX_PCI,
++	XWAY_MUX_CBUS,
+ 	XWAY_MUX_CGU,
+ 	XWAY_MUX_EBU,
++	XWAY_MUX_EBU2,
+ 	XWAY_MUX_JTAG,
++	XWAY_MUX_MCD,
+ 	XWAY_MUX_EXIN,
+ 	XWAY_MUX_TDM,
+ 	XWAY_MUX_STP,
+@@ -103,9 +105,15 @@ enum xway_mux {
+ 	XWAY_MUX_DFE,
+ 	XWAY_MUX_SDIO,
+ 	XWAY_MUX_GPHY,
++	XWAY_MUX_SSI,
++	XWAY_MUX_WIFI,
+ 	XWAY_MUX_NONE = 0xffff,
+ };
+ 
++/* ---------  DEPRECATED: xr9 related code --------- */
++/* ----------  use xrx100/xrx200 instead  ---------- */
++#define XR9_MAX_PIN		56
++
+ static const struct ltq_mfp_pin xway_mfp[] = {
+ 	/*       pin    f0	f1	f2	f3   */
+ 	MFP_XWAY(GPIO0, GPIO,	EXIN,	NONE,	TDM),
+@@ -113,7 +121,7 @@ static const struct ltq_mfp_pin xway_mfp
+ 	MFP_XWAY(GPIO2, GPIO,	CGU,	EXIN,	GPHY),
+ 	MFP_XWAY(GPIO3, GPIO,	CGU,	NONE,	PCI),
+ 	MFP_XWAY(GPIO4, GPIO,	STP,	NONE,	ASC),
+-	MFP_XWAY(GPIO5, GPIO,	STP,	NONE,	GPHY),
++	MFP_XWAY(GPIO5, GPIO,	STP,	GPHY,	NONE),
+ 	MFP_XWAY(GPIO6, GPIO,	STP,	GPT,	ASC),
+ 	MFP_XWAY(GPIO7, GPIO,	CGU,	PCI,	GPHY),
+ 	MFP_XWAY(GPIO8, GPIO,	CGU,	NMI,	NONE),
+@@ -152,7 +160,7 @@ static const struct ltq_mfp_pin xway_mfp
+ 	MFP_XWAY(GPIO41, GPIO,	NONE,	NONE,	NONE),
+ 	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
+ 	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
+-	MFP_XWAY(GPIO44, GPIO,	NONE,	GPHY,	SIN),
++	MFP_XWAY(GPIO44, GPIO,	NONE,	SIN,	GPHY),
+ 	MFP_XWAY(GPIO45, GPIO,	NONE,	GPHY,	SIN),
+ 	MFP_XWAY(GPIO46, GPIO,	NONE,	NONE,	EXIN),
+ 	MFP_XWAY(GPIO47, GPIO,	NONE,	GPHY,	SIN),
+@@ -166,42 +174,6 @@ static const struct ltq_mfp_pin xway_mfp
+ 	MFP_XWAY(GPIO55, GPIO,	NONE,	NONE,	NONE),
+ };
+ 
+-static const struct ltq_mfp_pin ase_mfp[] = {
+-	/*       pin    f0	f1	f2	f3   */
+-	MFP_XWAY(GPIO0, GPIO,	EXIN,	MII,	TDM),
+-	MFP_XWAY(GPIO1, GPIO,	STP,	DFE,	EBU),
+-	MFP_XWAY(GPIO2, GPIO,	STP,	DFE,	EPHY),
+-	MFP_XWAY(GPIO3, GPIO,	STP,	EPHY,	EBU),
+-	MFP_XWAY(GPIO4, GPIO,	GPT,	EPHY,	MII),
+-	MFP_XWAY(GPIO5, GPIO,	MII,	ASC,	GPT),
+-	MFP_XWAY(GPIO6, GPIO,	MII,	ASC,	EXIN),
+-	MFP_XWAY(GPIO7, GPIO,	SPI,	MII,	JTAG),
+-	MFP_XWAY(GPIO8, GPIO,	SPI,	MII,	JTAG),
+-	MFP_XWAY(GPIO9, GPIO,	SPI,	MII,	JTAG),
+-	MFP_XWAY(GPIO10, GPIO,	SPI,	MII,	JTAG),
+-	MFP_XWAY(GPIO11, GPIO,	EBU,	CGU,	JTAG),
+-	MFP_XWAY(GPIO12, GPIO,	EBU,	MII,	SDIO),
+-	MFP_XWAY(GPIO13, GPIO,	EBU,	MII,	CGU),
+-	MFP_XWAY(GPIO14, GPIO,	EBU,	SPI,	CGU),
+-	MFP_XWAY(GPIO15, GPIO,	EBU,	SPI,	SDIO),
+-	MFP_XWAY(GPIO16, GPIO,	NONE,	NONE,	NONE),
+-	MFP_XWAY(GPIO17, GPIO,	NONE,	NONE,	NONE),
+-	MFP_XWAY(GPIO18, GPIO,	NONE,	NONE,	NONE),
+-	MFP_XWAY(GPIO19, GPIO,	EBU,	MII,	SDIO),
+-	MFP_XWAY(GPIO20, GPIO,	EBU,	MII,	SDIO),
+-	MFP_XWAY(GPIO21, GPIO,	EBU,	MII,	SDIO),
+-	MFP_XWAY(GPIO22, GPIO,	EBU,	MII,	CGU),
+-	MFP_XWAY(GPIO23, GPIO,	EBU,	MII,	CGU),
+-	MFP_XWAY(GPIO24, GPIO,	EBU,	NONE,	MII),
+-	MFP_XWAY(GPIO25, GPIO,	EBU,	MII,	GPT),
+-	MFP_XWAY(GPIO26, GPIO,	EBU,	MII,	SDIO),
+-	MFP_XWAY(GPIO27, GPIO,	EBU,	NONE,	MII),
+-	MFP_XWAY(GPIO28, GPIO,	MII,	EBU,	SDIO),
+-	MFP_XWAY(GPIO29, GPIO,	EBU,	MII,	EXIN),
+-	MFP_XWAY(GPIO30, GPIO,	NONE,	NONE,	NONE),
+-	MFP_XWAY(GPIO31, GPIO,	NONE,	NONE,	NONE),
+-};
+-
+ static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35};
+ static const unsigned pins_asc0[] = {GPIO11, GPIO12};
+ static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10};
+@@ -231,6 +203,8 @@ static const unsigned pins_nand_cle[] =
+ static const unsigned pins_nand_rdy[] = {GPIO48};
+ static const unsigned pins_nand_rd[] = {GPIO49};
+ 
++static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9};
++
+ static const unsigned pins_exin0[] = {GPIO0};
+ static const unsigned pins_exin1[] = {GPIO1};
+ static const unsigned pins_exin2[] = {GPIO2};
+@@ -240,7 +214,7 @@ static const unsigned pins_exin5[] = {GP
+ 
+ static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18};
+ static const unsigned pins_spi_cs1[] = {GPIO15};
+-static const unsigned pins_spi_cs2[] = {GPIO21};
++static const unsigned pins_spi_cs2[] = {GPIO22};
+ static const unsigned pins_spi_cs3[] = {GPIO13};
+ static const unsigned pins_spi_cs4[] = {GPIO10};
+ static const unsigned pins_spi_cs5[] = {GPIO9};
+@@ -264,25 +238,6 @@ static const unsigned pins_pci_req2[] =
+ static const unsigned pins_pci_req3[] = {GPIO3};
+ static const unsigned pins_pci_req4[] = {GPIO37};
+ 
+-static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11};
+-static const unsigned ase_pins_asc[] = {GPIO5, GPIO6};
+-static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3};
+-static const unsigned ase_pins_ephy[] = {GPIO2, GPIO3, GPIO4};
+-static const unsigned ase_pins_dfe[] = {GPIO1, GPIO2};
+-
+-static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10};
+-static const unsigned ase_pins_spi_cs1[] = {GPIO7};
+-static const unsigned ase_pins_spi_cs2[] = {GPIO15};
+-static const unsigned ase_pins_spi_cs3[] = {GPIO14};
+-
+-static const unsigned ase_pins_exin0[] = {GPIO6};
+-static const unsigned ase_pins_exin1[] = {GPIO29};
+-static const unsigned ase_pins_exin2[] = {GPIO0};
+-
+-static const unsigned ase_pins_gpt1[] = {GPIO5};
+-static const unsigned ase_pins_gpt2[] = {GPIO4};
+-static const unsigned ase_pins_gpt3[] = {GPIO25};
+-
+ static const struct ltq_pin_group xway_grps[] = {
+ 	GRP_MUX("exin0", EXIN, pins_exin0),
+ 	GRP_MUX("exin1", EXIN, pins_exin1),
+@@ -338,24 +293,6 @@ static const struct ltq_pin_group xway_g
+ 	GRP_MUX("gphy1 led2", GPHY, pins_gphy1_led2),
+ };
+ 
+-static const struct ltq_pin_group ase_grps[] = {
+-	GRP_MUX("exin0", EXIN, ase_pins_exin0),
+-	GRP_MUX("exin1", EXIN, ase_pins_exin1),
+-	GRP_MUX("exin2", EXIN, ase_pins_exin2),
+-	GRP_MUX("jtag", JTAG, ase_pins_jtag),
+-	GRP_MUX("stp", STP, ase_pins_stp),
+-	GRP_MUX("asc", ASC, ase_pins_asc),
+-	GRP_MUX("gpt1", GPT, ase_pins_gpt1),
+-	GRP_MUX("gpt2", GPT, ase_pins_gpt2),
+-	GRP_MUX("gpt3", GPT, ase_pins_gpt3),
+-	GRP_MUX("ephy", EPHY, ase_pins_ephy),
+-	GRP_MUX("dfe", DFE, ase_pins_dfe),
+-	GRP_MUX("spi", SPI, ase_pins_spi),
+-	GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1),
+-	GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2),
+-	GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3),
+-};
+-
+ static const char * const xway_pci_grps[] = {"gnt1", "gnt2",
+ 						"gnt3", "req1",
+ 						"req2", "req3"};
+@@ -395,30 +332,6 @@ static const char * const xrx_pci_grps[]
+ 						"req1", "req2",
+ 						"req3", "req4"};
+ 
+-/* ase */
+-static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"};
+-static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
+-static const char * const ase_dfe_grps[] = {"dfe"};
+-static const char * const ase_ephy_grps[] = {"ephy"};
+-static const char * const ase_asc_grps[] = {"asc"};
+-static const char * const ase_jtag_grps[] = {"jtag"};
+-static const char * const ase_stp_grps[] = {"stp"};
+-static const char * const ase_spi_grps[] = {"spi", "spi_cs1",
+-						"spi_cs2", "spi_cs3"};
+-
+-static const struct ltq_pmx_func danube_funcs[] = {
+-	{"spi",		ARRAY_AND_SIZE(xway_spi_grps)},
+-	{"asc",		ARRAY_AND_SIZE(xway_asc_grps)},
+-	{"cgu",		ARRAY_AND_SIZE(xway_cgu_grps)},
+-	{"jtag",	ARRAY_AND_SIZE(xway_jtag_grps)},
+-	{"exin",	ARRAY_AND_SIZE(xway_exin_grps)},
+-	{"stp",		ARRAY_AND_SIZE(xway_stp_grps)},
+-	{"gpt",		ARRAY_AND_SIZE(xway_gpt_grps)},
+-	{"nmi",		ARRAY_AND_SIZE(xway_nmi_grps)},
+-	{"pci",		ARRAY_AND_SIZE(xway_pci_grps)},
+-	{"ebu",		ARRAY_AND_SIZE(xway_ebu_grps)},
+-};
+-
+ static const struct ltq_pmx_func xrx_funcs[] = {
+ 	{"spi",		ARRAY_AND_SIZE(xway_spi_grps)},
+ 	{"asc",		ARRAY_AND_SIZE(xway_asc_grps)},
+@@ -434,17 +347,991 @@ static const struct ltq_pmx_func xrx_fun
+ 	{"gphy",	ARRAY_AND_SIZE(xrx_gphy_grps)},
+ };
+ 
++/* ---------  ase related code --------- */
++#define ASE_MAX_PIN		32
++
++static const struct ltq_mfp_pin ase_mfp[] = {
++	/*       pin    f0	f1	f2	f3   */
++	MFP_XWAY(GPIO0, GPIO,	EXIN,	MII,	TDM),
++	MFP_XWAY(GPIO1, GPIO,	STP,	DFE,	EBU),
++	MFP_XWAY(GPIO2, GPIO,	STP,	DFE,	EPHY),
++	MFP_XWAY(GPIO3, GPIO,	STP,	EPHY,	EBU),
++	MFP_XWAY(GPIO4, GPIO,	GPT,	EPHY,	MII),
++	MFP_XWAY(GPIO5, GPIO,	MII,	ASC,	GPT),
++	MFP_XWAY(GPIO6, GPIO,	MII,	ASC,	EXIN),
++	MFP_XWAY(GPIO7, GPIO,	SPI,	MII,	JTAG),
++	MFP_XWAY(GPIO8, GPIO,	SPI,	MII,	JTAG),
++	MFP_XWAY(GPIO9, GPIO,	SPI,	MII,	JTAG),
++	MFP_XWAY(GPIO10, GPIO,	SPI,	MII,	JTAG),
++	MFP_XWAY(GPIO11, GPIO,	EBU,	CGU,	JTAG),
++	MFP_XWAY(GPIO12, GPIO,	EBU,	MII,	SDIO),
++	MFP_XWAY(GPIO13, GPIO,	EBU,	MII,	CGU),
++	MFP_XWAY(GPIO14, GPIO,	EBU,	SPI,	CGU),
++	MFP_XWAY(GPIO15, GPIO,	EBU,	SPI,	SDIO),
++	MFP_XWAY(GPIO16, GPIO,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO17, GPIO,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO18, GPIO,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO19, GPIO,	EBU,	MII,	SDIO),
++	MFP_XWAY(GPIO20, GPIO,	EBU,	MII,	SDIO),
++	MFP_XWAY(GPIO21, GPIO,	EBU,	MII,	EBU2),
++	MFP_XWAY(GPIO22, GPIO,	EBU,	MII,	CGU),
++	MFP_XWAY(GPIO23, GPIO,	EBU,	MII,	CGU),
++	MFP_XWAY(GPIO24, GPIO,	EBU,	EBU2,	MDIO),
++	MFP_XWAY(GPIO25, GPIO,	EBU,	MII,	GPT),
++	MFP_XWAY(GPIO26, GPIO,	EBU,	MII,	SDIO),
++	MFP_XWAY(GPIO27, GPIO,	EBU,	NONE,	MDIO),
++	MFP_XWAY(GPIO28, GPIO,	MII,	EBU,	SDIO),
++	MFP_XWAY(GPIO29, GPIO,	EBU,	MII,	EXIN),
++	MFP_XWAY(GPIO30, GPIO,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO31, GPIO,	NONE,	NONE,	NONE),
++};
++
++static const unsigned ase_exin_pin_map[] = {GPIO6, GPIO29, GPIO0};
++
++static const unsigned ase_pins_exin0[] = {GPIO6};
++static const unsigned ase_pins_exin1[] = {GPIO29};
++static const unsigned ase_pins_exin2[] = {GPIO0};
++
++static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11};
++static const unsigned ase_pins_asc[] = {GPIO5, GPIO6};
++static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3};
++static const unsigned ase_pins_mdio[] = {GPIO24, GPIO27};
++static const unsigned ase_pins_ephy_led0[] = {GPIO2};
++static const unsigned ase_pins_ephy_led1[] = {GPIO3};
++static const unsigned ase_pins_ephy_led2[] = {GPIO4};
++static const unsigned ase_pins_dfe_led0[] = {GPIO1};
++static const unsigned ase_pins_dfe_led1[] = {GPIO2};
++
++static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; /* DEPRECATED */
++static const unsigned ase_pins_spi_di[] = {GPIO8};
++static const unsigned ase_pins_spi_do[] = {GPIO9};
++static const unsigned ase_pins_spi_clk[] = {GPIO10};
++static const unsigned ase_pins_spi_cs1[] = {GPIO7};
++static const unsigned ase_pins_spi_cs2[] = {GPIO15};
++static const unsigned ase_pins_spi_cs3[] = {GPIO14};
++
++static const unsigned ase_pins_gpt1[] = {GPIO5};
++static const unsigned ase_pins_gpt2[] = {GPIO4};
++static const unsigned ase_pins_gpt3[] = {GPIO25};
++
++static const unsigned ase_pins_clkout0[] = {GPIO23};
++static const unsigned ase_pins_clkout1[] = {GPIO22};
++static const unsigned ase_pins_clkout2[] = {GPIO14};
++
++static const struct ltq_pin_group ase_grps[] = {
++	GRP_MUX("exin0", EXIN, ase_pins_exin0),
++	GRP_MUX("exin1", EXIN, ase_pins_exin1),
++	GRP_MUX("exin2", EXIN, ase_pins_exin2),
++	GRP_MUX("jtag", JTAG, ase_pins_jtag),
++	GRP_MUX("spi", SPI, ase_pins_spi), /* DEPRECATED */
++	GRP_MUX("spi_di", SPI, ase_pins_spi_di),
++	GRP_MUX("spi_do", SPI, ase_pins_spi_do),
++	GRP_MUX("spi_clk", SPI, ase_pins_spi_clk),
++	GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1),
++	GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2),
++	GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3),
++	GRP_MUX("asc", ASC, ase_pins_asc),
++	GRP_MUX("stp", STP, ase_pins_stp),
++	GRP_MUX("gpt1", GPT, ase_pins_gpt1),
++	GRP_MUX("gpt2", GPT, ase_pins_gpt2),
++	GRP_MUX("gpt3", GPT, ase_pins_gpt3),
++	GRP_MUX("clkout0", CGU, ase_pins_clkout0),
++	GRP_MUX("clkout1", CGU, ase_pins_clkout1),
++	GRP_MUX("clkout2", CGU, ase_pins_clkout2),
++	GRP_MUX("mdio", MDIO, ase_pins_mdio),
++	GRP_MUX("dfe led0", DFE, ase_pins_dfe_led0),
++	GRP_MUX("dfe led1", DFE, ase_pins_dfe_led1),
++	GRP_MUX("ephy led0", EPHY, ase_pins_ephy_led0),
++	GRP_MUX("ephy led1", EPHY, ase_pins_ephy_led1),
++	GRP_MUX("ephy led2", EPHY, ase_pins_ephy_led2),
++};
++
++static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"};
++static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
++static const char * const ase_cgu_grps[] = {"clkout0", "clkout1",
++						"clkout2"};
++static const char * const ase_mdio_grps[] = {"mdio"};
++static const char * const ase_dfe_grps[] = {"dfe led0", "dfe led1"};
++static const char * const ase_ephy_grps[] = {"ephy led0", "ephy led1",
++						"ephy led2"};
++static const char * const ase_asc_grps[] = {"asc"};
++static const char * const ase_jtag_grps[] = {"jtag"};
++static const char * const ase_stp_grps[] = {"stp"};
++static const char * const ase_spi_grps[] = {"spi",  /* DEPRECATED */
++						"spi_di", "spi_do",
++						"spi_clk", "spi_cs1",
++						"spi_cs2", "spi_cs3"};
++
+ static const struct ltq_pmx_func ase_funcs[] = {
+ 	{"spi",		ARRAY_AND_SIZE(ase_spi_grps)},
+ 	{"asc",		ARRAY_AND_SIZE(ase_asc_grps)},
++	{"cgu",		ARRAY_AND_SIZE(ase_cgu_grps)},
+ 	{"jtag",	ARRAY_AND_SIZE(ase_jtag_grps)},
+ 	{"exin",	ARRAY_AND_SIZE(ase_exin_grps)},
+ 	{"stp",		ARRAY_AND_SIZE(ase_stp_grps)},
+ 	{"gpt",		ARRAY_AND_SIZE(ase_gpt_grps)},
++	{"mdio",	ARRAY_AND_SIZE(ase_mdio_grps)},
+ 	{"ephy",	ARRAY_AND_SIZE(ase_ephy_grps)},
+ 	{"dfe",		ARRAY_AND_SIZE(ase_dfe_grps)},
+ };
+ 
++/* ---------  danube related code --------- */
++#define DANUBE_MAX_PIN		32
++
++static const struct ltq_mfp_pin danube_mfp[] = {
++	/*       pin    f0	f1	f2	f3   */
++	MFP_XWAY(GPIO0, GPIO,	EXIN,	SDIO,	TDM),
++	MFP_XWAY(GPIO1, GPIO,	EXIN,	CBUS,	MII),
++	MFP_XWAY(GPIO2, GPIO,	CGU,	EXIN,	MII),
++	MFP_XWAY(GPIO3, GPIO,	CGU,	SDIO,	PCI),
++	MFP_XWAY(GPIO4, GPIO,	STP,	DFE,	ASC),
++	MFP_XWAY(GPIO5, GPIO,	STP,	MII,	DFE),
++	MFP_XWAY(GPIO6, GPIO,	STP,	GPT,	ASC),
++	MFP_XWAY(GPIO7, GPIO,	CGU,	CBUS,	MII),
++	MFP_XWAY(GPIO8, GPIO,	CGU,	NMI,	MII),
++	MFP_XWAY(GPIO9, GPIO,	ASC,	SPI,	MII),
++	MFP_XWAY(GPIO10, GPIO,	ASC,	SPI,	MII),
++	MFP_XWAY(GPIO11, GPIO,	ASC,	CBUS,	SPI),
++	MFP_XWAY(GPIO12, GPIO,	ASC,	CBUS,	MCD),
++	MFP_XWAY(GPIO13, GPIO,	EBU,	SPI,	MII),
++	MFP_XWAY(GPIO14, GPIO,	CGU,	CBUS,	MII),
++	MFP_XWAY(GPIO15, GPIO,	SPI,	SDIO,	JTAG),
++	MFP_XWAY(GPIO16, GPIO,	SPI,	SDIO,	JTAG),
++	MFP_XWAY(GPIO17, GPIO,	SPI,	SDIO,	JTAG),
++	MFP_XWAY(GPIO18, GPIO,	SPI,	SDIO,	JTAG),
++	MFP_XWAY(GPIO19, GPIO,	PCI,	SDIO,	MII),
++	MFP_XWAY(GPIO20, GPIO,	JTAG,	SDIO,	MII),
++	MFP_XWAY(GPIO21, GPIO,	PCI,	EBU,	GPT),
++	MFP_XWAY(GPIO22, GPIO,	SPI,	MCD,	MII),
++	MFP_XWAY(GPIO23, GPIO,	EBU,	PCI,	STP),
++	MFP_XWAY(GPIO24, GPIO,	EBU,	TDM,	PCI),
++	MFP_XWAY(GPIO25, GPIO,	TDM,	SDIO,	ASC),
++	MFP_XWAY(GPIO26, GPIO,	EBU,	TDM,	SDIO),
++	MFP_XWAY(GPIO27, GPIO,	TDM,	SDIO,	ASC),
++	MFP_XWAY(GPIO28, GPIO,	GPT,	MII,	SDIO),
++	MFP_XWAY(GPIO29, GPIO,	PCI,	CBUS,	MII),
++	MFP_XWAY(GPIO30, GPIO,	PCI,	CBUS,	MII),
++	MFP_XWAY(GPIO31, GPIO,	EBU,	PCI,	MII),
++};
++
++static const unsigned danube_exin_pin_map[] = {GPIO0, GPIO1, GPIO2};
++
++static const unsigned danube_pins_exin0[] = {GPIO0};
++static const unsigned danube_pins_exin1[] = {GPIO1};
++static const unsigned danube_pins_exin2[] = {GPIO2};
++
++static const unsigned danube_pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO18, GPIO20};
++static const unsigned danube_pins_asc0[] = {GPIO11, GPIO12};
++static const unsigned danube_pins_asc0_cts_rts[] = {GPIO9, GPIO10};
++static const unsigned danube_pins_stp[] = {GPIO4, GPIO5, GPIO6};
++static const unsigned danube_pins_nmi[] = {GPIO8};
++
++static const unsigned danube_pins_dfe_led0[] = {GPIO4};
++static const unsigned danube_pins_dfe_led1[] = {GPIO5};
++
++static const unsigned danube_pins_ebu_a24[] = {GPIO13};
++static const unsigned danube_pins_ebu_clk[] = {GPIO21};
++static const unsigned danube_pins_ebu_cs1[] = {GPIO23};
++static const unsigned danube_pins_ebu_a23[] = {GPIO24};
++static const unsigned danube_pins_ebu_wait[] = {GPIO26};
++static const unsigned danube_pins_ebu_a25[] = {GPIO31};
++
++static const unsigned danube_pins_nand_ale[] = {GPIO13};
++static const unsigned danube_pins_nand_cs1[] = {GPIO23};
++static const unsigned danube_pins_nand_cle[] = {GPIO24};
++
++static const unsigned danube_pins_spi[] = {GPIO16, GPIO17, GPIO18}; /* DEPRECATED */
++static const unsigned danube_pins_spi_di[] = {GPIO16};
++static const unsigned danube_pins_spi_do[] = {GPIO17};
++static const unsigned danube_pins_spi_clk[] = {GPIO18};
++static const unsigned danube_pins_spi_cs1[] = {GPIO15};
++static const unsigned danube_pins_spi_cs2[] = {GPIO21};
++static const unsigned danube_pins_spi_cs3[] = {GPIO13};
++static const unsigned danube_pins_spi_cs4[] = {GPIO10};
++static const unsigned danube_pins_spi_cs5[] = {GPIO9};
++static const unsigned danube_pins_spi_cs6[] = {GPIO11};
++
++static const unsigned danube_pins_gpt1[] = {GPIO28};
++static const unsigned danube_pins_gpt2[] = {GPIO21};
++static const unsigned danube_pins_gpt3[] = {GPIO6};
++
++static const unsigned danube_pins_clkout0[] = {GPIO8};
++static const unsigned danube_pins_clkout1[] = {GPIO7};
++static const unsigned danube_pins_clkout2[] = {GPIO3};
++static const unsigned danube_pins_clkout3[] = {GPIO2};
++
++static const unsigned danube_pins_pci_gnt1[] = {GPIO30};
++static const unsigned danube_pins_pci_gnt2[] = {GPIO23};
++static const unsigned danube_pins_pci_gnt3[] = {GPIO19};
++static const unsigned danube_pins_pci_req1[] = {GPIO29};
++static const unsigned danube_pins_pci_req2[] = {GPIO31};
++static const unsigned danube_pins_pci_req3[] = {GPIO3};
++
++static const struct ltq_pin_group danube_grps[] = {
++	GRP_MUX("exin0", EXIN, danube_pins_exin0),
++	GRP_MUX("exin1", EXIN, danube_pins_exin1),
++	GRP_MUX("exin2", EXIN, danube_pins_exin2),
++	GRP_MUX("jtag", JTAG, danube_pins_jtag),
++	GRP_MUX("ebu a23", EBU, danube_pins_ebu_a23),
++	GRP_MUX("ebu a24", EBU, danube_pins_ebu_a24),
++	GRP_MUX("ebu a25", EBU, danube_pins_ebu_a25),
++	GRP_MUX("ebu clk", EBU, danube_pins_ebu_clk),
++	GRP_MUX("ebu cs1", EBU, danube_pins_ebu_cs1),
++	GRP_MUX("ebu wait", EBU, danube_pins_ebu_wait),
++	GRP_MUX("nand ale", EBU, danube_pins_nand_ale),
++	GRP_MUX("nand cs1", EBU, danube_pins_nand_cs1),
++	GRP_MUX("nand cle", EBU, danube_pins_nand_cle),
++	GRP_MUX("spi", SPI, danube_pins_spi), /* DEPRECATED */
++	GRP_MUX("spi_di", SPI, danube_pins_spi_di),
++	GRP_MUX("spi_do", SPI, danube_pins_spi_do),
++	GRP_MUX("spi_clk", SPI, danube_pins_spi_clk),
++	GRP_MUX("spi_cs1", SPI, danube_pins_spi_cs1),
++	GRP_MUX("spi_cs2", SPI, danube_pins_spi_cs2),
++	GRP_MUX("spi_cs3", SPI, danube_pins_spi_cs3),
++	GRP_MUX("spi_cs4", SPI, danube_pins_spi_cs4),
++	GRP_MUX("spi_cs5", SPI, danube_pins_spi_cs5),
++	GRP_MUX("spi_cs6", SPI, danube_pins_spi_cs6),
++	GRP_MUX("asc0", ASC, danube_pins_asc0),
++	GRP_MUX("asc0 cts rts", ASC, danube_pins_asc0_cts_rts),
++	GRP_MUX("stp", STP, danube_pins_stp),
++	GRP_MUX("nmi", NMI, danube_pins_nmi),
++	GRP_MUX("gpt1", GPT, danube_pins_gpt1),
++	GRP_MUX("gpt2", GPT, danube_pins_gpt2),
++	GRP_MUX("gpt3", GPT, danube_pins_gpt3),
++	GRP_MUX("clkout0", CGU, danube_pins_clkout0),
++	GRP_MUX("clkout1", CGU, danube_pins_clkout1),
++	GRP_MUX("clkout2", CGU, danube_pins_clkout2),
++	GRP_MUX("clkout3", CGU, danube_pins_clkout3),
++	GRP_MUX("gnt1", PCI, danube_pins_pci_gnt1),
++	GRP_MUX("gnt2", PCI, danube_pins_pci_gnt2),
++	GRP_MUX("gnt3", PCI, danube_pins_pci_gnt3),
++	GRP_MUX("req1", PCI, danube_pins_pci_req1),
++	GRP_MUX("req2", PCI, danube_pins_pci_req2),
++	GRP_MUX("req3", PCI, danube_pins_pci_req3),
++	GRP_MUX("dfe led0", DFE, danube_pins_dfe_led0),
++	GRP_MUX("dfe led1", DFE, danube_pins_dfe_led1),
++};
++
++static const char * const danube_pci_grps[] = {"gnt1", "gnt2",
++						"gnt3", "req1",
++						"req2", "req3"};
++static const char * const danube_spi_grps[] = {"spi", /* DEPRECATED */
++						"spi_di", "spi_do",
++						"spi_clk", "spi_cs1",
++						"spi_cs2", "spi_cs3",
++						"spi_cs4", "spi_cs5",
++						"spi_cs6"};
++static const char * const danube_cgu_grps[] = {"clkout0", "clkout1",
++						"clkout2", "clkout3"};
++static const char * const danube_ebu_grps[] = {"ebu a23", "ebu a24",
++						"ebu a25", "ebu cs1",
++						"ebu wait", "ebu clk",
++						"nand ale", "nand cs1",
++						"nand cle"};
++static const char * const danube_dfe_grps[] = {"dfe led0", "dfe led1"};
++static const char * const danube_exin_grps[] = {"exin0", "exin1", "exin2"};
++static const char * const danube_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
++static const char * const danube_asc_grps[] = {"asc0", "asc0 cts rts"};
++static const char * const danube_jtag_grps[] = {"jtag"};
++static const char * const danube_stp_grps[] = {"stp"};
++static const char * const danube_nmi_grps[] = {"nmi"};
++
++static const struct ltq_pmx_func danube_funcs[] = {
++	{"spi",		ARRAY_AND_SIZE(danube_spi_grps)},
++	{"asc",		ARRAY_AND_SIZE(danube_asc_grps)},
++	{"cgu",		ARRAY_AND_SIZE(danube_cgu_grps)},
++	{"jtag",	ARRAY_AND_SIZE(danube_jtag_grps)},
++	{"exin",	ARRAY_AND_SIZE(danube_exin_grps)},
++	{"stp",		ARRAY_AND_SIZE(danube_stp_grps)},
++	{"gpt",		ARRAY_AND_SIZE(danube_gpt_grps)},
++	{"nmi",		ARRAY_AND_SIZE(danube_nmi_grps)},
++	{"pci",		ARRAY_AND_SIZE(danube_pci_grps)},
++	{"ebu",		ARRAY_AND_SIZE(danube_ebu_grps)},
++	{"dfe",		ARRAY_AND_SIZE(danube_dfe_grps)},
++};
++
++/* ---------  xrx100 related code --------- */
++#define XRX100_MAX_PIN		56
++
++static const struct ltq_mfp_pin xrx100_mfp[] = {
++	/*       pin    f0	f1	f2	f3   */
++	MFP_XWAY(GPIO0, GPIO,	EXIN,	SDIO,	TDM),
++	MFP_XWAY(GPIO1, GPIO,	EXIN,	CBUS,	SIN),
++	MFP_XWAY(GPIO2, GPIO,	CGU,	EXIN,	NONE),
++	MFP_XWAY(GPIO3, GPIO,	CGU,	SDIO,	PCI),
++	MFP_XWAY(GPIO4, GPIO,	STP,	DFE,	ASC),
++	MFP_XWAY(GPIO5, GPIO,	STP,	NONE,	DFE),
++	MFP_XWAY(GPIO6, GPIO,	STP,	GPT,	ASC),
++	MFP_XWAY(GPIO7, GPIO,	CGU,	CBUS,	NONE),
++	MFP_XWAY(GPIO8, GPIO,	CGU,	NMI,	NONE),
++	MFP_XWAY(GPIO9, GPIO,	ASC,	SPI,	EXIN),
++	MFP_XWAY(GPIO10, GPIO,	ASC,	SPI,	EXIN),
++	MFP_XWAY(GPIO11, GPIO,	ASC,	CBUS,	SPI),
++	MFP_XWAY(GPIO12, GPIO,	ASC,	CBUS,	MCD),
++	MFP_XWAY(GPIO13, GPIO,	EBU,	SPI,	NONE),
++	MFP_XWAY(GPIO14, GPIO,	CGU,	NONE,	NONE),
++	MFP_XWAY(GPIO15, GPIO,	SPI,	SDIO,	MCD),
++	MFP_XWAY(GPIO16, GPIO,	SPI,	SDIO,	NONE),
++	MFP_XWAY(GPIO17, GPIO,	SPI,	SDIO,	NONE),
++	MFP_XWAY(GPIO18, GPIO,	SPI,	SDIO,	NONE),
++	MFP_XWAY(GPIO19, GPIO,	PCI,	SDIO,	CGU),
++	MFP_XWAY(GPIO20, GPIO,	NONE,	SDIO,	EBU),
++	MFP_XWAY(GPIO21, GPIO,	PCI,	EBU,	GPT),
++	MFP_XWAY(GPIO22, GPIO,	SPI,	NONE,	EBU),
++	MFP_XWAY(GPIO23, GPIO,	EBU,	PCI,	STP),
++	MFP_XWAY(GPIO24, GPIO,	EBU,	TDM,	PCI),
++	MFP_XWAY(GPIO25, GPIO,	TDM,	SDIO,	ASC),
++	MFP_XWAY(GPIO26, GPIO,	EBU,	TDM,	SDIO),
++	MFP_XWAY(GPIO27, GPIO,	TDM,	SDIO,	ASC),
++	MFP_XWAY(GPIO28, GPIO,	GPT,	NONE,	SDIO),
++	MFP_XWAY(GPIO29, GPIO,	PCI,	CBUS,	NONE),
++	MFP_XWAY(GPIO30, GPIO,	PCI,	CBUS,	NONE),
++	MFP_XWAY(GPIO31, GPIO,	EBU,	PCI,	NONE),
++	MFP_XWAY(GPIO32, GPIO,	MII,	NONE,	EBU),
++	MFP_XWAY(GPIO33, GPIO,	MII,	NONE,	EBU),
++	MFP_XWAY(GPIO34, GPIO,	SIN,	SSI,	NONE),
++	MFP_XWAY(GPIO35, GPIO,	SIN,	SSI,	NONE),
++	MFP_XWAY(GPIO36, GPIO,	SIN,	SSI,	NONE),
++	MFP_XWAY(GPIO37, GPIO,	PCI,	NONE,	NONE),
++	MFP_XWAY(GPIO38, GPIO,	PCI,	NONE,	NONE),
++	MFP_XWAY(GPIO39, GPIO,	NONE,	EXIN,	NONE),
++	MFP_XWAY(GPIO40, GPIO,	MII,	TDM,	NONE),
++	MFP_XWAY(GPIO41, GPIO,	MII,	TDM,	NONE),
++	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
++	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
++	MFP_XWAY(GPIO44, GPIO,	MII,	SIN,	NONE),
++	MFP_XWAY(GPIO45, GPIO,	MII,	NONE,	SIN),
++	MFP_XWAY(GPIO46, GPIO,	MII,	NONE,	EXIN),
++	MFP_XWAY(GPIO47, GPIO,	MII,	NONE,	SIN),
++	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO50, GPIO,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO51, GPIO,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO52, GPIO,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO53, GPIO,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO54, GPIO,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO55, GPIO,	NONE,	NONE,	NONE),
++};
++
++static const unsigned xrx100_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9};
++
++static const unsigned xrx100_pins_exin0[] = {GPIO0};
++static const unsigned xrx100_pins_exin1[] = {GPIO1};
++static const unsigned xrx100_pins_exin2[] = {GPIO2};
++static const unsigned xrx100_pins_exin3[] = {GPIO39};
++static const unsigned xrx100_pins_exin4[] = {GPIO10};
++static const unsigned xrx100_pins_exin5[] = {GPIO9};
++
++static const unsigned xrx100_pins_asc0[] = {GPIO11, GPIO12};
++static const unsigned xrx100_pins_asc0_cts_rts[] = {GPIO9, GPIO10};
++static const unsigned xrx100_pins_stp[] = {GPIO4, GPIO5, GPIO6};
++static const unsigned xrx100_pins_nmi[] = {GPIO8};
++static const unsigned xrx100_pins_mdio[] = {GPIO42, GPIO43};
++
++static const unsigned xrx100_pins_dfe_led0[] = {GPIO4};
++static const unsigned xrx100_pins_dfe_led1[] = {GPIO5};
++
++static const unsigned xrx100_pins_ebu_a24[] = {GPIO13};
++static const unsigned xrx100_pins_ebu_clk[] = {GPIO21};
++static const unsigned xrx100_pins_ebu_cs1[] = {GPIO23};
++static const unsigned xrx100_pins_ebu_a23[] = {GPIO24};
++static const unsigned xrx100_pins_ebu_wait[] = {GPIO26};
++static const unsigned xrx100_pins_ebu_a25[] = {GPIO31};
++
++static const unsigned xrx100_pins_nand_ale[] = {GPIO13};
++static const unsigned xrx100_pins_nand_cs1[] = {GPIO23};
++static const unsigned xrx100_pins_nand_cle[] = {GPIO24};
++static const unsigned xrx100_pins_nand_rdy[] = {GPIO48};
++static const unsigned xrx100_pins_nand_rd[] = {GPIO49};
++
++static const unsigned xrx100_pins_spi_di[] = {GPIO16};
++static const unsigned xrx100_pins_spi_do[] = {GPIO17};
++static const unsigned xrx100_pins_spi_clk[] = {GPIO18};
++static const unsigned xrx100_pins_spi_cs1[] = {GPIO15};
++static const unsigned xrx100_pins_spi_cs2[] = {GPIO22};
++static const unsigned xrx100_pins_spi_cs3[] = {GPIO13};
++static const unsigned xrx100_pins_spi_cs4[] = {GPIO10};
++static const unsigned xrx100_pins_spi_cs5[] = {GPIO9};
++static const unsigned xrx100_pins_spi_cs6[] = {GPIO11};
++
++static const unsigned xrx100_pins_gpt1[] = {GPIO28};
++static const unsigned xrx100_pins_gpt2[] = {GPIO21};
++static const unsigned xrx100_pins_gpt3[] = {GPIO6};
++
++static const unsigned xrx100_pins_clkout0[] = {GPIO8};
++static const unsigned xrx100_pins_clkout1[] = {GPIO7};
++static const unsigned xrx100_pins_clkout2[] = {GPIO3};
++static const unsigned xrx100_pins_clkout3[] = {GPIO2};
++
++static const unsigned xrx100_pins_pci_gnt1[] = {GPIO30};
++static const unsigned xrx100_pins_pci_gnt2[] = {GPIO23};
++static const unsigned xrx100_pins_pci_gnt3[] = {GPIO19};
++static const unsigned xrx100_pins_pci_gnt4[] = {GPIO38};
++static const unsigned xrx100_pins_pci_req1[] = {GPIO29};
++static const unsigned xrx100_pins_pci_req2[] = {GPIO31};
++static const unsigned xrx100_pins_pci_req3[] = {GPIO3};
++static const unsigned xrx100_pins_pci_req4[] = {GPIO37};
++
++static const struct ltq_pin_group xrx100_grps[] = {
++	GRP_MUX("exin0", EXIN, xrx100_pins_exin0),
++	GRP_MUX("exin1", EXIN, xrx100_pins_exin1),
++	GRP_MUX("exin2", EXIN, xrx100_pins_exin2),
++	GRP_MUX("exin3", EXIN, xrx100_pins_exin3),
++	GRP_MUX("exin4", EXIN, xrx100_pins_exin4),
++	GRP_MUX("exin5", EXIN, xrx100_pins_exin5),
++	GRP_MUX("ebu a23", EBU, xrx100_pins_ebu_a23),
++	GRP_MUX("ebu a24", EBU, xrx100_pins_ebu_a24),
++	GRP_MUX("ebu a25", EBU, xrx100_pins_ebu_a25),
++	GRP_MUX("ebu clk", EBU, xrx100_pins_ebu_clk),
++	GRP_MUX("ebu cs1", EBU, xrx100_pins_ebu_cs1),
++	GRP_MUX("ebu wait", EBU, xrx100_pins_ebu_wait),
++	GRP_MUX("nand ale", EBU, xrx100_pins_nand_ale),
++	GRP_MUX("nand cs1", EBU, xrx100_pins_nand_cs1),
++	GRP_MUX("nand cle", EBU, xrx100_pins_nand_cle),
++	GRP_MUX("nand rdy", EBU, xrx100_pins_nand_rdy),
++	GRP_MUX("nand rd", EBU, xrx100_pins_nand_rd),
++	GRP_MUX("spi_di", SPI, xrx100_pins_spi_di),
++	GRP_MUX("spi_do", SPI, xrx100_pins_spi_do),
++	GRP_MUX("spi_clk", SPI, xrx100_pins_spi_clk),
++	GRP_MUX("spi_cs1", SPI, xrx100_pins_spi_cs1),
++	GRP_MUX("spi_cs2", SPI, xrx100_pins_spi_cs2),
++	GRP_MUX("spi_cs3", SPI, xrx100_pins_spi_cs3),
++	GRP_MUX("spi_cs4", SPI, xrx100_pins_spi_cs4),
++	GRP_MUX("spi_cs5", SPI, xrx100_pins_spi_cs5),
++	GRP_MUX("spi_cs6", SPI, xrx100_pins_spi_cs6),
++	GRP_MUX("asc0", ASC, xrx100_pins_asc0),
++	GRP_MUX("asc0 cts rts", ASC, xrx100_pins_asc0_cts_rts),
++	GRP_MUX("stp", STP, xrx100_pins_stp),
++	GRP_MUX("nmi", NMI, xrx100_pins_nmi),
++	GRP_MUX("gpt1", GPT, xrx100_pins_gpt1),
++	GRP_MUX("gpt2", GPT, xrx100_pins_gpt2),
++	GRP_MUX("gpt3", GPT, xrx100_pins_gpt3),
++	GRP_MUX("clkout0", CGU, xrx100_pins_clkout0),
++	GRP_MUX("clkout1", CGU, xrx100_pins_clkout1),
++	GRP_MUX("clkout2", CGU, xrx100_pins_clkout2),
++	GRP_MUX("clkout3", CGU, xrx100_pins_clkout3),
++	GRP_MUX("gnt1", PCI, xrx100_pins_pci_gnt1),
++	GRP_MUX("gnt2", PCI, xrx100_pins_pci_gnt2),
++	GRP_MUX("gnt3", PCI, xrx100_pins_pci_gnt3),
++	GRP_MUX("gnt4", PCI, xrx100_pins_pci_gnt4),
++	GRP_MUX("req1", PCI, xrx100_pins_pci_req1),
++	GRP_MUX("req2", PCI, xrx100_pins_pci_req2),
++	GRP_MUX("req3", PCI, xrx100_pins_pci_req3),
++	GRP_MUX("req4", PCI, xrx100_pins_pci_req4),
++	GRP_MUX("mdio", MDIO, xrx100_pins_mdio),
++	GRP_MUX("dfe led0", DFE, xrx100_pins_dfe_led0),
++	GRP_MUX("dfe led1", DFE, xrx100_pins_dfe_led1),
++};
++
++static const char * const xrx100_pci_grps[] = {"gnt1", "gnt2",
++						"gnt3", "gnt4",
++						"req1", "req2",
++						"req3", "req4"};
++static const char * const xrx100_spi_grps[] = {"spi_di", "spi_do",
++						"spi_clk", "spi_cs1",
++						"spi_cs2", "spi_cs3",
++						"spi_cs4", "spi_cs5",
++						"spi_cs6"};
++static const char * const xrx100_cgu_grps[] = {"clkout0", "clkout1",
++						"clkout2", "clkout3"};
++static const char * const xrx100_ebu_grps[] = {"ebu a23", "ebu a24",
++						"ebu a25", "ebu cs1",
++						"ebu wait", "ebu clk",
++						"nand ale", "nand cs1",
++						"nand cle", "nand rdy",
++						"nand rd"};
++static const char * const xrx100_exin_grps[] = {"exin0", "exin1", "exin2",
++						"exin3", "exin4", "exin5"};
++static const char * const xrx100_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
++static const char * const xrx100_asc_grps[] = {"asc0", "asc0 cts rts"};
++static const char * const xrx100_stp_grps[] = {"stp"};
++static const char * const xrx100_nmi_grps[] = {"nmi"};
++static const char * const xrx100_mdio_grps[] = {"mdio"};
++static const char * const xrx100_dfe_grps[] = {"dfe led0", "dfe led1"};
++
++static const struct ltq_pmx_func xrx100_funcs[] = {
++	{"spi",		ARRAY_AND_SIZE(xrx100_spi_grps)},
++	{"asc",		ARRAY_AND_SIZE(xrx100_asc_grps)},
++	{"cgu",		ARRAY_AND_SIZE(xrx100_cgu_grps)},
++	{"exin",	ARRAY_AND_SIZE(xrx100_exin_grps)},
++	{"stp",		ARRAY_AND_SIZE(xrx100_stp_grps)},
++	{"gpt",		ARRAY_AND_SIZE(xrx100_gpt_grps)},
++	{"nmi",		ARRAY_AND_SIZE(xrx100_nmi_grps)},
++	{"pci",		ARRAY_AND_SIZE(xrx100_pci_grps)},
++	{"ebu",		ARRAY_AND_SIZE(xrx100_ebu_grps)},
++	{"mdio",	ARRAY_AND_SIZE(xrx100_mdio_grps)},
++	{"dfe",		ARRAY_AND_SIZE(xrx100_dfe_grps)},
++};
++
++/* ---------  xrx200 related code --------- */
++#define XRX200_MAX_PIN		50
++
++static const struct ltq_mfp_pin xrx200_mfp[] = {
++	/*       pin    f0	f1	f2	f3   */
++	MFP_XWAY(GPIO0, GPIO,	EXIN,	SDIO,	TDM),
++	MFP_XWAY(GPIO1, GPIO,	EXIN,	CBUS,	SIN),
++	MFP_XWAY(GPIO2, GPIO,	CGU,	EXIN,	GPHY),
++	MFP_XWAY(GPIO3, GPIO,	CGU,	SDIO,	PCI),
++	MFP_XWAY(GPIO4, GPIO,	STP,	DFE,	USIF),
++	MFP_XWAY(GPIO5, GPIO,	STP,	GPHY,	DFE),
++	MFP_XWAY(GPIO6, GPIO,	STP,	GPT,	USIF),
++	MFP_XWAY(GPIO7, GPIO,	CGU,	CBUS,	GPHY),
++	MFP_XWAY(GPIO8, GPIO,	CGU,	NMI,	NONE),
++	MFP_XWAY(GPIO9, GPIO,	USIF,	SPI,	EXIN),
++	MFP_XWAY(GPIO10, GPIO,	USIF,	SPI,	EXIN),
++	MFP_XWAY(GPIO11, GPIO,	USIF,	CBUS,	SPI),
++	MFP_XWAY(GPIO12, GPIO,	USIF,	CBUS,	MCD),
++	MFP_XWAY(GPIO13, GPIO,	EBU,	SPI,	NONE),
++	MFP_XWAY(GPIO14, GPIO,	CGU,	CBUS,	USIF),
++	MFP_XWAY(GPIO15, GPIO,	SPI,	SDIO,	MCD),
++	MFP_XWAY(GPIO16, GPIO,	SPI,	SDIO,	NONE),
++	MFP_XWAY(GPIO17, GPIO,	SPI,	SDIO,	NONE),
++	MFP_XWAY(GPIO18, GPIO,	SPI,	SDIO,	NONE),
++	MFP_XWAY(GPIO19, GPIO,	PCI,	SDIO,	CGU),
++	MFP_XWAY(GPIO20, GPIO,	NONE,	SDIO,	EBU),
++	MFP_XWAY(GPIO21, GPIO,	PCI,	EBU,	GPT),
++	MFP_XWAY(GPIO22, GPIO,	SPI,	CGU,	EBU),
++	MFP_XWAY(GPIO23, GPIO,	EBU,	PCI,	STP),
++	MFP_XWAY(GPIO24, GPIO,	EBU,	TDM,	PCI),
++	MFP_XWAY(GPIO25, GPIO,	TDM,	SDIO,	USIF),
++	MFP_XWAY(GPIO26, GPIO,	EBU,	TDM,	SDIO),
++	MFP_XWAY(GPIO27, GPIO,	TDM,	SDIO,	USIF),
++	MFP_XWAY(GPIO28, GPIO,	GPT,	PCI,	SDIO),
++	MFP_XWAY(GPIO29, GPIO,	PCI,	CBUS,	EXIN),
++	MFP_XWAY(GPIO30, GPIO,	PCI,	CBUS,	NONE),
++	MFP_XWAY(GPIO31, GPIO,	EBU,	PCI,	NONE),
++	MFP_XWAY(GPIO32, GPIO,	MII,	NONE,	EBU),
++	MFP_XWAY(GPIO33, GPIO,	MII,	NONE,	EBU),
++	MFP_XWAY(GPIO34, GPIO,	SIN,	SSI,	NONE),
++	MFP_XWAY(GPIO35, GPIO,	SIN,	SSI,	NONE),
++	MFP_XWAY(GPIO36, GPIO,	SIN,	SSI,	EXIN),
++	MFP_XWAY(GPIO37, GPIO,	USIF,	NONE,	PCI),
++	MFP_XWAY(GPIO38, GPIO,	PCI,	USIF,	NONE),
++	MFP_XWAY(GPIO39, GPIO,	USIF,	EXIN,	NONE),
++	MFP_XWAY(GPIO40, GPIO,	MII,	TDM,	NONE),
++	MFP_XWAY(GPIO41, GPIO,	MII,	TDM,	NONE),
++	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
++	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
++	MFP_XWAY(GPIO44, GPIO,	MII,	SIN,	GPHY),
++	MFP_XWAY(GPIO45, GPIO,	MII,	GPHY,	SIN),
++	MFP_XWAY(GPIO46, GPIO,	MII,	NONE,	EXIN),
++	MFP_XWAY(GPIO47, GPIO,	MII,	GPHY,	SIN),
++	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
++};
++
++static const unsigned xrx200_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9};
++
++static const unsigned xrx200_pins_exin0[] = {GPIO0};
++static const unsigned xrx200_pins_exin1[] = {GPIO1};
++static const unsigned xrx200_pins_exin2[] = {GPIO2};
++static const unsigned xrx200_pins_exin3[] = {GPIO39};
++static const unsigned xrx200_pins_exin4[] = {GPIO10};
++static const unsigned xrx200_pins_exin5[] = {GPIO9};
++
++static const unsigned xrx200_pins_usif_uart_rx[] = {GPIO11};
++static const unsigned xrx200_pins_usif_uart_tx[] = {GPIO12};
++static const unsigned xrx200_pins_usif_uart_rts[] = {GPIO9};
++static const unsigned xrx200_pins_usif_uart_cts[] = {GPIO10};
++static const unsigned xrx200_pins_usif_uart_dtr[] = {GPIO4};
++static const unsigned xrx200_pins_usif_uart_dsr[] = {GPIO6};
++static const unsigned xrx200_pins_usif_uart_dcd[] = {GPIO25};
++static const unsigned xrx200_pins_usif_uart_ri[] = {GPIO27};
++
++static const unsigned xrx200_pins_usif_spi_di[] = {GPIO11};
++static const unsigned xrx200_pins_usif_spi_do[] = {GPIO12};
++static const unsigned xrx200_pins_usif_spi_clk[] = {GPIO38};
++static const unsigned xrx200_pins_usif_spi_cs0[] = {GPIO37};
++static const unsigned xrx200_pins_usif_spi_cs1[] = {GPIO39};
++static const unsigned xrx200_pins_usif_spi_cs2[] = {GPIO14};
++
++static const unsigned xrx200_pins_stp[] = {GPIO4, GPIO5, GPIO6};
++static const unsigned xrx200_pins_nmi[] = {GPIO8};
++static const unsigned xrx200_pins_mdio[] = {GPIO42, GPIO43};
++
++static const unsigned xrx200_pins_dfe_led0[] = {GPIO4};
++static const unsigned xrx200_pins_dfe_led1[] = {GPIO5};
++
++static const unsigned xrx200_pins_gphy0_led0[] = {GPIO5};
++static const unsigned xrx200_pins_gphy0_led1[] = {GPIO7};
++static const unsigned xrx200_pins_gphy0_led2[] = {GPIO2};
++static const unsigned xrx200_pins_gphy1_led0[] = {GPIO44};
++static const unsigned xrx200_pins_gphy1_led1[] = {GPIO45};
++static const unsigned xrx200_pins_gphy1_led2[] = {GPIO47};
++
++static const unsigned xrx200_pins_ebu_a24[] = {GPIO13};
++static const unsigned xrx200_pins_ebu_clk[] = {GPIO21};
++static const unsigned xrx200_pins_ebu_cs1[] = {GPIO23};
++static const unsigned xrx200_pins_ebu_a23[] = {GPIO24};
++static const unsigned xrx200_pins_ebu_wait[] = {GPIO26};
++static const unsigned xrx200_pins_ebu_a25[] = {GPIO31};
++
++static const unsigned xrx200_pins_nand_ale[] = {GPIO13};
++static const unsigned xrx200_pins_nand_cs1[] = {GPIO23};
++static const unsigned xrx200_pins_nand_cle[] = {GPIO24};
++static const unsigned xrx200_pins_nand_rdy[] = {GPIO48};
++static const unsigned xrx200_pins_nand_rd[] = {GPIO49};
++
++static const unsigned xrx200_pins_spi_di[] = {GPIO16};
++static const unsigned xrx200_pins_spi_do[] = {GPIO17};
++static const unsigned xrx200_pins_spi_clk[] = {GPIO18};
++static const unsigned xrx200_pins_spi_cs1[] = {GPIO15};
++static const unsigned xrx200_pins_spi_cs2[] = {GPIO22};
++static const unsigned xrx200_pins_spi_cs3[] = {GPIO13};
++static const unsigned xrx200_pins_spi_cs4[] = {GPIO10};
++static const unsigned xrx200_pins_spi_cs5[] = {GPIO9};
++static const unsigned xrx200_pins_spi_cs6[] = {GPIO11};
++
++static const unsigned xrx200_pins_gpt1[] = {GPIO28};
++static const unsigned xrx200_pins_gpt2[] = {GPIO21};
++static const unsigned xrx200_pins_gpt3[] = {GPIO6};
++
++static const unsigned xrx200_pins_clkout0[] = {GPIO8};
++static const unsigned xrx200_pins_clkout1[] = {GPIO7};
++static const unsigned xrx200_pins_clkout2[] = {GPIO3};
++static const unsigned xrx200_pins_clkout3[] = {GPIO2};
++
++static const unsigned xrx200_pins_pci_gnt1[] = {GPIO28};
++static const unsigned xrx200_pins_pci_gnt2[] = {GPIO23};
++static const unsigned xrx200_pins_pci_gnt3[] = {GPIO19};
++static const unsigned xrx200_pins_pci_gnt4[] = {GPIO38};
++static const unsigned xrx200_pins_pci_req1[] = {GPIO29};
++static const unsigned xrx200_pins_pci_req2[] = {GPIO31};
++static const unsigned xrx200_pins_pci_req3[] = {GPIO3};
++static const unsigned xrx200_pins_pci_req4[] = {GPIO37};
++
++static const struct ltq_pin_group xrx200_grps[] = {
++	GRP_MUX("exin0", EXIN, xrx200_pins_exin0),
++	GRP_MUX("exin1", EXIN, xrx200_pins_exin1),
++	GRP_MUX("exin2", EXIN, xrx200_pins_exin2),
++	GRP_MUX("exin3", EXIN, xrx200_pins_exin3),
++	GRP_MUX("exin4", EXIN, xrx200_pins_exin4),
++	GRP_MUX("exin5", EXIN, xrx200_pins_exin5),
++	GRP_MUX("ebu a23", EBU, xrx200_pins_ebu_a23),
++	GRP_MUX("ebu a24", EBU, xrx200_pins_ebu_a24),
++	GRP_MUX("ebu a25", EBU, xrx200_pins_ebu_a25),
++	GRP_MUX("ebu clk", EBU, xrx200_pins_ebu_clk),
++	GRP_MUX("ebu cs1", EBU, xrx200_pins_ebu_cs1),
++	GRP_MUX("ebu wait", EBU, xrx200_pins_ebu_wait),
++	GRP_MUX("nand ale", EBU, xrx200_pins_nand_ale),
++	GRP_MUX("nand cs1", EBU, xrx200_pins_nand_cs1),
++	GRP_MUX("nand cle", EBU, xrx200_pins_nand_cle),
++	GRP_MUX("nand rdy", EBU, xrx200_pins_nand_rdy),
++	GRP_MUX("nand rd", EBU, xrx200_pins_nand_rd),
++	GRP_MUX("spi_di", SPI, xrx200_pins_spi_di),
++	GRP_MUX("spi_do", SPI, xrx200_pins_spi_do),
++	GRP_MUX("spi_clk", SPI, xrx200_pins_spi_clk),
++	GRP_MUX("spi_cs1", SPI, xrx200_pins_spi_cs1),
++	GRP_MUX("spi_cs2", SPI, xrx200_pins_spi_cs2),
++	GRP_MUX("spi_cs3", SPI, xrx200_pins_spi_cs3),
++	GRP_MUX("spi_cs4", SPI, xrx200_pins_spi_cs4),
++	GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5),
++	GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6),
++	GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx),
++	GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_tx),
++	GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts),
++	GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts),
++	GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr),
++	GRP_MUX("usif uart_dsr", USIF, xrx200_pins_usif_uart_dsr),
++	GRP_MUX("usif uart_dcd", USIF, xrx200_pins_usif_uart_dcd),
++	GRP_MUX("usif uart_ri", USIF, xrx200_pins_usif_uart_ri),
++	GRP_MUX("usif spi_di", USIF, xrx200_pins_usif_spi_di),
++	GRP_MUX("usif spi_do", USIF, xrx200_pins_usif_spi_do),
++	GRP_MUX("usif spi_clk", USIF, xrx200_pins_usif_spi_clk),
++	GRP_MUX("usif spi_cs0", USIF, xrx200_pins_usif_spi_cs0),
++	GRP_MUX("usif spi_cs1", USIF, xrx200_pins_usif_spi_cs1),
++	GRP_MUX("usif spi_cs2", USIF, xrx200_pins_usif_spi_cs2),
++	GRP_MUX("stp", STP, xrx200_pins_stp),
++	GRP_MUX("nmi", NMI, xrx200_pins_nmi),
++	GRP_MUX("gpt1", GPT, xrx200_pins_gpt1),
++	GRP_MUX("gpt2", GPT, xrx200_pins_gpt2),
++	GRP_MUX("gpt3", GPT, xrx200_pins_gpt3),
++	GRP_MUX("clkout0", CGU, xrx200_pins_clkout0),
++	GRP_MUX("clkout1", CGU, xrx200_pins_clkout1),
++	GRP_MUX("clkout2", CGU, xrx200_pins_clkout2),
++	GRP_MUX("clkout3", CGU, xrx200_pins_clkout3),
++	GRP_MUX("gnt1", PCI, xrx200_pins_pci_gnt1),
++	GRP_MUX("gnt2", PCI, xrx200_pins_pci_gnt2),
++	GRP_MUX("gnt3", PCI, xrx200_pins_pci_gnt3),
++	GRP_MUX("gnt4", PCI, xrx200_pins_pci_gnt4),
++	GRP_MUX("req1", PCI, xrx200_pins_pci_req1),
++	GRP_MUX("req2", PCI, xrx200_pins_pci_req2),
++	GRP_MUX("req3", PCI, xrx200_pins_pci_req3),
++	GRP_MUX("req4", PCI, xrx200_pins_pci_req4),
++	GRP_MUX("mdio", MDIO, xrx200_pins_mdio),
++	GRP_MUX("dfe led0", DFE, xrx200_pins_dfe_led0),
++	GRP_MUX("dfe led1", DFE, xrx200_pins_dfe_led1),
++	GRP_MUX("gphy0 led0", GPHY, xrx200_pins_gphy0_led0),
++	GRP_MUX("gphy0 led1", GPHY, xrx200_pins_gphy0_led1),
++	GRP_MUX("gphy0 led2", GPHY, xrx200_pins_gphy0_led2),
++	GRP_MUX("gphy1 led0", GPHY, xrx200_pins_gphy1_led0),
++	GRP_MUX("gphy1 led1", GPHY, xrx200_pins_gphy1_led1),
++	GRP_MUX("gphy1 led2", GPHY, xrx200_pins_gphy1_led2),
++};
++
++static const char * const xrx200_pci_grps[] = {"gnt1", "gnt2",
++						"gnt3", "gnt4",
++						"req1", "req2",
++						"req3", "req4"};
++static const char * const xrx200_spi_grps[] = {"spi_di", "spi_do",
++						"spi_clk", "spi_cs1",
++						"spi_cs2", "spi_cs3",
++						"spi_cs4", "spi_cs5",
++						"spi_cs6"};
++static const char * const xrx200_cgu_grps[] = {"clkout0", "clkout1",
++						"clkout2", "clkout3"};
++static const char * const xrx200_ebu_grps[] = {"ebu a23", "ebu a24",
++						"ebu a25", "ebu cs1",
++						"ebu wait", "ebu clk",
++						"nand ale", "nand cs1",
++						"nand cle", "nand rdy",
++						"nand rd"};
++static const char * const xrx200_exin_grps[] = {"exin0", "exin1", "exin2",
++						"exin3", "exin4", "exin5"};
++static const char * const xrx200_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
++static const char * const xrx200_usif_grps[] = {"usif uart_rx", "usif uart_tx",
++						"usif uart_rts", "usif uart_cts",
++						"usif uart_dtr", "usif uart_dsr",
++						"usif uart_dcd", "usif uart_ri",
++						"usif spi_di", "usif spi_do",
++						"usif spi_clk", "usif spi_cs0",
++						"usif spi_cs1", "usif spi_cs2"};
++static const char * const xrx200_stp_grps[] = {"stp"};
++static const char * const xrx200_nmi_grps[] = {"nmi"};
++static const char * const xrx200_mdio_grps[] = {"mdio"};
++static const char * const xrx200_dfe_grps[] = {"dfe led0", "dfe led1"};
++static const char * const xrx200_gphy_grps[] = {"gphy0 led0", "gphy0 led1",
++						"gphy0 led2", "gphy1 led0",
++						"gphy1 led1", "gphy1 led2"};
++
++static const struct ltq_pmx_func xrx200_funcs[] = {
++	{"spi",		ARRAY_AND_SIZE(xrx200_spi_grps)},
++	{"usif",	ARRAY_AND_SIZE(xrx200_usif_grps)},
++	{"cgu",		ARRAY_AND_SIZE(xrx200_cgu_grps)},
++	{"exin",	ARRAY_AND_SIZE(xrx200_exin_grps)},
++	{"stp",		ARRAY_AND_SIZE(xrx200_stp_grps)},
++	{"gpt",		ARRAY_AND_SIZE(xrx200_gpt_grps)},
++	{"nmi",		ARRAY_AND_SIZE(xrx200_nmi_grps)},
++	{"pci",		ARRAY_AND_SIZE(xrx200_pci_grps)},
++	{"ebu",		ARRAY_AND_SIZE(xrx200_ebu_grps)},
++	{"mdio",	ARRAY_AND_SIZE(xrx200_mdio_grps)},
++	{"dfe",		ARRAY_AND_SIZE(xrx200_dfe_grps)},
++	{"gphy",	ARRAY_AND_SIZE(xrx200_gphy_grps)},
++};
++
++/* ---------  xrx300 related code --------- */
++#define XRX300_MAX_PIN		64
++
++static const struct ltq_mfp_pin xrx300_mfp[] = {
++	/*       pin    f0	f1	f2	f3   */
++	MFP_XWAY(GPIO0, GPIO,	EXIN,	EPHY,	NONE),
++	MFP_XWAY(GPIO1, GPIO,	NONE,	EXIN,	NONE),
++	MFP_XWAY(GPIO2, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO3, GPIO,	CGU,	NONE,	NONE),
++	MFP_XWAY(GPIO4, GPIO,	STP,	DFE,	NONE),
++	MFP_XWAY(GPIO5, GPIO,	STP,	EPHY,	DFE),
++	MFP_XWAY(GPIO6, GPIO,	STP,	NONE,	NONE),
++	MFP_XWAY(GPIO7, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO8, GPIO,	CGU,	GPHY,	EPHY),
++	MFP_XWAY(GPIO9, GPIO,	WIFI,	NONE,	EXIN),
++	MFP_XWAY(GPIO10, GPIO,	USIF,	SPI,	EXIN),
++	MFP_XWAY(GPIO11, GPIO,	USIF,	WIFI,	SPI),
++	MFP_XWAY(GPIO12, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO13, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO14, GPIO,	CGU,	USIF,	EPHY),
++	MFP_XWAY(GPIO15, GPIO,	SPI,	NONE,	MCD),
++	MFP_XWAY(GPIO16, GPIO,	SPI,	EXIN,	NONE),
++	MFP_XWAY(GPIO17, GPIO,	SPI,	NONE,	NONE),
++	MFP_XWAY(GPIO18, GPIO,	SPI,	NONE,	NONE),
++	MFP_XWAY(GPIO19, GPIO,	USIF,	NONE,	EPHY),
++	MFP_XWAY(GPIO20, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO21, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO22, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO23, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO24, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO25, GPIO,	TDM,	NONE,	NONE),
++	MFP_XWAY(GPIO26, GPIO,	TDM,	NONE,	NONE),
++	MFP_XWAY(GPIO27, GPIO,	TDM,	NONE,	NONE),
++	MFP_XWAY(GPIO28, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO29, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO30, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO31, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO32, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO33, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO34, GPIO,	NONE,	SSI,	NONE),
++	MFP_XWAY(GPIO35, GPIO,	NONE,	SSI,	NONE),
++	MFP_XWAY(GPIO36, GPIO,	NONE,	SSI,	NONE),
++	MFP_XWAY(GPIO37, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO38, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO39, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO40, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO41, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
++	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
++	MFP_XWAY(GPIO44, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO45, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO46, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO47, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO50, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO51, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO52, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO53, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO54, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO55, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO56, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO57, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO58, GPIO,	EBU,	TDM,	NONE),
++	MFP_XWAY(GPIO59, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO60, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO61, GPIO,	EBU,	NONE,	NONE),
++	MFP_XWAY(GPIO62, NONE,	NONE,	NONE,	NONE),
++	MFP_XWAY(GPIO63, NONE,	NONE,	NONE,	NONE),
++};
++
++static const unsigned xrx300_exin_pin_map[] = {GPIO0, GPIO1, GPIO16, GPIO10, GPIO9};
++
++static const unsigned xrx300_pins_exin0[] = {GPIO0};
++static const unsigned xrx300_pins_exin1[] = {GPIO1};
++static const unsigned xrx300_pins_exin2[] = {GPIO16};
++/* EXIN3 is not available on xrX300 */
++static const unsigned xrx300_pins_exin4[] = {GPIO10};
++static const unsigned xrx300_pins_exin5[] = {GPIO9};
++
++static const unsigned xrx300_pins_usif_uart_rx[] = {GPIO11};
++static const unsigned xrx300_pins_usif_uart_tx[] = {GPIO10};
++
++static const unsigned xrx300_pins_usif_spi_di[] = {GPIO11};
++static const unsigned xrx300_pins_usif_spi_do[] = {GPIO10};
++static const unsigned xrx300_pins_usif_spi_clk[] = {GPIO19};
++static const unsigned xrx300_pins_usif_spi_cs0[] = {GPIO14};
++
++static const unsigned xrx300_pins_stp[] = {GPIO4, GPIO5, GPIO6};
++static const unsigned xrx300_pins_mdio[] = {GPIO42, GPIO43};
++
++static const unsigned xrx300_pins_dfe_led0[] = {GPIO4};
++static const unsigned xrx300_pins_dfe_led1[] = {GPIO5};
++
++static const unsigned xrx300_pins_ephy0_led0[] = {GPIO5};
++static const unsigned xrx300_pins_ephy0_led1[] = {GPIO8};
++static const unsigned xrx300_pins_ephy1_led0[] = {GPIO14};
++static const unsigned xrx300_pins_ephy1_led1[] = {GPIO19};
++
++static const unsigned xrx300_pins_nand_ale[] = {GPIO13};
++static const unsigned xrx300_pins_nand_cs1[] = {GPIO23};
++static const unsigned xrx300_pins_nand_cle[] = {GPIO24};
++static const unsigned xrx300_pins_nand_rdy[] = {GPIO48};
++static const unsigned xrx300_pins_nand_rd[] = {GPIO49};
++static const unsigned xrx300_pins_nand_d1[] = {GPIO50};
++static const unsigned xrx300_pins_nand_d0[] = {GPIO51};
++static const unsigned xrx300_pins_nand_d2[] = {GPIO52};
++static const unsigned xrx300_pins_nand_d7[] = {GPIO53};
++static const unsigned xrx300_pins_nand_d6[] = {GPIO54};
++static const unsigned xrx300_pins_nand_d5[] = {GPIO55};
++static const unsigned xrx300_pins_nand_d4[] = {GPIO56};
++static const unsigned xrx300_pins_nand_d3[] = {GPIO57};
++static const unsigned xrx300_pins_nand_cs0[] = {GPIO58};
++static const unsigned xrx300_pins_nand_wr[] = {GPIO59};
++static const unsigned xrx300_pins_nand_wp[] = {GPIO60};
++static const unsigned xrx300_pins_nand_se[] = {GPIO61};
++
++static const unsigned xrx300_pins_spi_di[] = {GPIO16};
++static const unsigned xrx300_pins_spi_do[] = {GPIO17};
++static const unsigned xrx300_pins_spi_clk[] = {GPIO18};
++static const unsigned xrx300_pins_spi_cs1[] = {GPIO15};
++/* SPI_CS2 is not available on xrX300 */
++/* SPI_CS3 is not available on xrX300 */
++static const unsigned xrx300_pins_spi_cs4[] = {GPIO10};
++/* SPI_CS5 is not available on xrX300 */
++static const unsigned xrx300_pins_spi_cs6[] = {GPIO11};
++
++/* CLKOUT0 is not available on xrX300 */
++/* CLKOUT1 is not available on xrX300 */
++static const unsigned xrx300_pins_clkout2[] = {GPIO3};
++
++static const struct ltq_pin_group xrx300_grps[] = {
++	GRP_MUX("exin0", EXIN, xrx300_pins_exin0),
++	GRP_MUX("exin1", EXIN, xrx300_pins_exin1),
++	GRP_MUX("exin2", EXIN, xrx300_pins_exin2),
++	GRP_MUX("exin4", EXIN, xrx300_pins_exin4),
++	GRP_MUX("exin5", EXIN, xrx300_pins_exin5),
++	GRP_MUX("nand ale", EBU, xrx300_pins_nand_ale),
++	GRP_MUX("nand cs1", EBU, xrx300_pins_nand_cs1),
++	GRP_MUX("nand cle", EBU, xrx300_pins_nand_cle),
++	GRP_MUX("nand rdy", EBU, xrx300_pins_nand_rdy),
++	GRP_MUX("nand rd", EBU, xrx300_pins_nand_rd),
++	GRP_MUX("nand d1", EBU, xrx300_pins_nand_d1),
++	GRP_MUX("nand d0", EBU, xrx300_pins_nand_d0),
++	GRP_MUX("nand d2", EBU, xrx300_pins_nand_d2),
++	GRP_MUX("nand d7", EBU, xrx300_pins_nand_d7),
++	GRP_MUX("nand d6", EBU, xrx300_pins_nand_d6),
++	GRP_MUX("nand d5", EBU, xrx300_pins_nand_d5),
++	GRP_MUX("nand d4", EBU, xrx300_pins_nand_d4),
++	GRP_MUX("nand d3", EBU, xrx300_pins_nand_d3),
++	GRP_MUX("nand cs0", EBU, xrx300_pins_nand_cs0),
++	GRP_MUX("nand wr", EBU, xrx300_pins_nand_wr),
++	GRP_MUX("nand wp", EBU, xrx300_pins_nand_wp),
++	GRP_MUX("nand se", EBU, xrx300_pins_nand_se),
++	GRP_MUX("spi_di", SPI, xrx300_pins_spi_di),
++	GRP_MUX("spi_do", SPI, xrx300_pins_spi_do),
++	GRP_MUX("spi_clk", SPI, xrx300_pins_spi_clk),
++	GRP_MUX("spi_cs1", SPI, xrx300_pins_spi_cs1),
++	GRP_MUX("spi_cs4", SPI, xrx300_pins_spi_cs4),
++	GRP_MUX("spi_cs6", SPI, xrx300_pins_spi_cs6),
++	GRP_MUX("usif uart_rx", USIF, xrx300_pins_usif_uart_rx),
++	GRP_MUX("usif uart_tx", USIF, xrx300_pins_usif_uart_tx),
++	GRP_MUX("usif spi_di", USIF, xrx300_pins_usif_spi_di),
++	GRP_MUX("usif spi_do", USIF, xrx300_pins_usif_spi_do),
++	GRP_MUX("usif spi_clk", USIF, xrx300_pins_usif_spi_clk),
++	GRP_MUX("usif spi_cs0", USIF, xrx300_pins_usif_spi_cs0),
++	GRP_MUX("stp", STP, xrx300_pins_stp),
++	GRP_MUX("clkout2", CGU, xrx300_pins_clkout2),
++	GRP_MUX("mdio", MDIO, xrx300_pins_mdio),
++	GRP_MUX("dfe led0", DFE, xrx300_pins_dfe_led0),
++	GRP_MUX("dfe led1", DFE, xrx300_pins_dfe_led1),
++	GRP_MUX("ephy0 led0", GPHY, xrx300_pins_ephy0_led0),
++	GRP_MUX("ephy0 led1", GPHY, xrx300_pins_ephy0_led1),
++	GRP_MUX("ephy1 led0", GPHY, xrx300_pins_ephy1_led0),
++	GRP_MUX("ephy1 led1", GPHY, xrx300_pins_ephy1_led1),
++};
++
++static const char * const xrx300_spi_grps[] = {"spi_di", "spi_do",
++						"spi_clk", "spi_cs1",
++						"spi_cs4", "spi_cs6"};
++static const char * const xrx300_cgu_grps[] = {"clkout2"};
++static const char * const xrx300_ebu_grps[] = {"nand ale", "nand cs1",
++						"nand cle", "nand rdy",
++						"nand rd", "nand d1",
++						"nand d0", "nand d2",
++						"nand d7", "nand d6",
++						"nand d5", "nand d4",
++						"nand d3", "nand cs0",
++						"nand wr", "nand wp",
++						"nand se"};
++static const char * const xrx300_exin_grps[] = {"exin0", "exin1", "exin2",
++						"exin4", "exin5"};
++static const char * const xrx300_usif_grps[] = {"usif uart_rx", "usif uart_tx",
++						"usif spi_di", "usif spi_do",
++						"usif spi_clk", "usif spi_cs0"};
++static const char * const xrx300_stp_grps[] = {"stp"};
++static const char * const xrx300_mdio_grps[] = {"mdio"};
++static const char * const xrx300_dfe_grps[] = {"dfe led0", "dfe led1"};
++static const char * const xrx300_gphy_grps[] = {"ephy0 led0", "ephy0 led1",
++						"ephy1 led0", "ephy1 led1"};
++
++static const struct ltq_pmx_func xrx300_funcs[] = {
++	{"spi",		ARRAY_AND_SIZE(xrx300_spi_grps)},
++	{"usif",	ARRAY_AND_SIZE(xrx300_usif_grps)},
++	{"cgu",		ARRAY_AND_SIZE(xrx300_cgu_grps)},
++	{"exin",	ARRAY_AND_SIZE(xrx300_exin_grps)},
++	{"stp",		ARRAY_AND_SIZE(xrx300_stp_grps)},
++	{"ebu",		ARRAY_AND_SIZE(xrx300_ebu_grps)},
++	{"mdio",	ARRAY_AND_SIZE(xrx300_mdio_grps)},
++	{"dfe",		ARRAY_AND_SIZE(xrx300_dfe_grps)},
++	{"ephy",	ARRAY_AND_SIZE(xrx300_gphy_grps)},
++};
++
+ /* ---------  pinconf related code --------- */
+ static int xway_pinconf_get(struct pinctrl_dev *pctldev,
+ 				unsigned pin,
+@@ -714,10 +1601,7 @@ static struct gpio_chip xway_chip = {
+ 
+ 
+ /* --------- register the pinctrl layer --------- */
+-static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9};
+-static const unsigned ase_exin_pins_map[] = {GPIO6, GPIO29, GPIO0};
+-
+-static struct pinctrl_xway_soc {
++struct pinctrl_xway_soc {
+ 	int pin_count;
+ 	const struct ltq_mfp_pin *mfp;
+ 	const struct ltq_pin_group *grps;
+@@ -726,22 +1610,54 @@ static struct pinctrl_xway_soc {
+ 	unsigned int num_funcs;
+ 	const unsigned *exin;
+ 	unsigned int num_exin;
+-} soc_cfg[] = {
+-	/* legacy xway */
+-	{XWAY_MAX_PIN, xway_mfp,
+-		xway_grps, ARRAY_SIZE(xway_grps),
+-		danube_funcs, ARRAY_SIZE(danube_funcs),
+-		xway_exin_pin_map, 3},
+-	/* xway xr9 series */
+-	{XR9_MAX_PIN, xway_mfp,
+-		xway_grps, ARRAY_SIZE(xway_grps),
+-		xrx_funcs, ARRAY_SIZE(xrx_funcs),
+-		xway_exin_pin_map, 6},
+-	/* xway ase series */
+-	{XWAY_MAX_PIN, ase_mfp,
+-		ase_grps, ARRAY_SIZE(ase_grps),
+-		ase_funcs, ARRAY_SIZE(ase_funcs),
+-		ase_exin_pins_map, 3},
++};
++
++/* xway xr9 series (DEPRECATED: Use XWAY xRX100/xRX200 Family) */
++static struct pinctrl_xway_soc xr9_pinctrl = {
++	XR9_MAX_PIN, xway_mfp,
++	xway_grps, ARRAY_SIZE(xway_grps),
++	xrx_funcs, ARRAY_SIZE(xrx_funcs),
++	xway_exin_pin_map, 6
++};
++
++/* XWAY AMAZON Family */
++static struct pinctrl_xway_soc ase_pinctrl = {
++	ASE_MAX_PIN, ase_mfp,
++	ase_grps, ARRAY_SIZE(ase_grps),
++	ase_funcs, ARRAY_SIZE(ase_funcs),
++	ase_exin_pin_map, 3
++};
++
++/* XWAY DANUBE Family */
++static struct pinctrl_xway_soc danube_pinctrl = {
++	DANUBE_MAX_PIN, danube_mfp,
++	danube_grps, ARRAY_SIZE(danube_grps),
++	danube_funcs, ARRAY_SIZE(danube_funcs),
++	danube_exin_pin_map, 3
++};
++
++/* XWAY xRX100 Family */
++static struct pinctrl_xway_soc xrx100_pinctrl = {
++	XRX100_MAX_PIN, xrx100_mfp,
++	xrx100_grps, ARRAY_SIZE(xrx100_grps),
++	xrx100_funcs, ARRAY_SIZE(xrx100_funcs),
++	xrx100_exin_pin_map, 6
++};
++
++/* XWAY xRX200 Family */
++static struct pinctrl_xway_soc xrx200_pinctrl = {
++	XRX200_MAX_PIN, xrx200_mfp,
++	xrx200_grps, ARRAY_SIZE(xrx200_grps),
++	xrx200_funcs, ARRAY_SIZE(xrx200_funcs),
++	xrx200_exin_pin_map, 6
++};
++
++/* XWAY xRX300 Family */
++static struct pinctrl_xway_soc xrx300_pinctrl = {
++	XRX300_MAX_PIN, xrx300_mfp,
++	xrx300_grps, ARRAY_SIZE(xrx300_grps),
++	xrx300_funcs, ARRAY_SIZE(xrx300_funcs),
++	xrx300_exin_pin_map, 5
+ };
+ 
+ static struct pinctrl_gpio_range xway_gpio_range = {
+@@ -750,9 +1666,14 @@ static struct pinctrl_gpio_range xway_gp
+ };
+ 
+ static const struct of_device_id xway_match[] = {
+-	{ .compatible = "lantiq,pinctrl-xway", .data = &soc_cfg[0]},
+-	{ .compatible = "lantiq,pinctrl-xr9", .data = &soc_cfg[1]},
+-	{ .compatible = "lantiq,pinctrl-ase", .data = &soc_cfg[2]},
++	{ .compatible = "lantiq,pinctrl-xway", .data = &danube_pinctrl}, /*DEPRECATED*/
++	{ .compatible = "lantiq,pinctrl-xr9", .data = &xr9_pinctrl}, /*DEPRECATED*/
++	{ .compatible = "lantiq,pinctrl-ase", .data = &ase_pinctrl}, /*DEPRECATED*/
++	{ .compatible = "lantiq,ase-pinctrl", .data = &ase_pinctrl},
++	{ .compatible = "lantiq,danube-pinctrl", .data = &danube_pinctrl},
++	{ .compatible = "lantiq,xrx100-pinctrl", .data = &xrx100_pinctrl},
++	{ .compatible = "lantiq,xrx200-pinctrl", .data = &xrx200_pinctrl},
++	{ .compatible = "lantiq,xrx300-pinctrl", .data = &xrx300_pinctrl},
+ 	{},
+ };
+ MODULE_DEVICE_TABLE(of, xway_match);
+@@ -774,7 +1695,7 @@ static int pinmux_xway_probe(struct plat
+ 	if (match)
+ 		xway_soc = (const struct pinctrl_xway_soc *) match->data;
+ 	else
+-		xway_soc = &soc_cfg[0];
++		xway_soc = &danube_pinctrl;
+ 
+ 	/* find out how many pads we have */
+ 	xway_chip.ngpio = xway_soc->pin_count;
diff --git a/target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch b/target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
new file mode 100644
index 0000000..a5f92ee
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
@@ -0,0 +1,28 @@
+From 57b588c950b7e04e0f22393ad439299ba4fda9c3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Thu, 26 Nov 2015 11:00:09 +0100
+Subject: [PATCH] pinctrl/lantiq: Fix GPIO Setup of GPIO Port3
+
+Some special handling of GPIO Port 3 is needed because of
+some hardware thingofabob.
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+Signed-off-by: Martin Schiller <mschiller at tdt.de>
+Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
+---
+ drivers/pinctrl/pinctrl-xway.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -1570,6 +1570,10 @@ static int xway_gpio_dir_out(struct gpio
+ {
+ 	struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
+ 
++	if (PORT(pin) == PORT3)
++		gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin));
++	else
++		gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin));
+ 	gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
+ 	xway_gpio_set(chip, pin, val);
+ 
diff --git a/target/linux/lantiq/patches-4.4/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch b/target/linux/lantiq/patches-4.4/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
new file mode 100644
index 0000000..78b5cba
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
@@ -0,0 +1,28 @@
+From c9f294ff6584782d20b4a766901a9cff7398bb20 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic at openwrt.org>
+Date: Mon, 4 Jan 2016 22:27:57 +0100
+Subject: [PATCH] pinctrl: lantiq: 2 pins have the wrong mux list
+
+The latest vendor SDK contained this patch.
+
+Signed-off-by: John Crispin <blogic at openwrt.org>
+Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
+---
+ drivers/pinctrl/pinctrl-xway.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -160,10 +160,10 @@ static const struct ltq_mfp_pin xway_mfp
+ 	MFP_XWAY(GPIO41, GPIO,	NONE,	NONE,	NONE),
+ 	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
+ 	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
+-	MFP_XWAY(GPIO44, GPIO,	NONE,	SIN,	GPHY),
++	MFP_XWAY(GPIO44, GPIO,	MII,	SIN,	GPHY),
+ 	MFP_XWAY(GPIO45, GPIO,	NONE,	GPHY,	SIN),
+ 	MFP_XWAY(GPIO46, GPIO,	NONE,	NONE,	EXIN),
+-	MFP_XWAY(GPIO47, GPIO,	NONE,	GPHY,	SIN),
++	MFP_XWAY(GPIO47, GPIO,	MII,	GPHY,	SIN),
+ 	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
+ 	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
+ 	MFP_XWAY(GPIO50, GPIO,	NONE,	NONE,	NONE),
diff --git a/target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch b/target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch
new file mode 100644
index 0000000..3dc60a7
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch
@@ -0,0 +1,1133 @@
+From 0175fc559debc22fe8d17e9b8ffd1452e0a4667d Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+Date: Tue, 16 Dec 2014 15:40:32 +0100
+Subject: [PATCH 1/2] spi: add support for Lantiq SPI controller
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
+---
+ drivers/spi/Kconfig      |    7 +
+ drivers/spi/Makefile     |    1 +
+ drivers/spi/spi-lantiq.c | 1089 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 1097 insertions(+)
+ create mode 100644 drivers/spi/spi-lantiq.c
+
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -355,6 +355,13 @@ config SPI_MT65XX
+ 	  say Y or M here.If you are not sure, say N.
+ 	  SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs.
+ 
++config SPI_LANTIQ
++	tristate "Lantiq SPI controller"
++	depends on LANTIQ && (SOC_TYPE_XWAY || SOC_FALCON)
++	help
++	  This driver supports the Lantiq SPI controller in master
++	  mode.
++
+ config SPI_OC_TINY
+ 	tristate "OpenCores tiny SPI"
+ 	depends on GPIOLIB || COMPILE_TEST
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_GPIO)			+= spi-gpio.o
+ obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMG_SPFI)		+= spi-img-spfi.o
+ obj-$(CONFIG_SPI_IMX)			+= spi-imx.o
++obj-$(CONFIG_SPI_LANTIQ)		+= spi-lantiq.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
+ obj-$(CONFIG_SPI_MESON_SPIFC)		+= spi-meson-spifc.o
+ obj-$(CONFIG_SPI_MPC512x_PSC)		+= spi-mpc512x-psc.o
+--- /dev/null
++++ b/drivers/spi/spi-lantiq.c
+@@ -0,0 +1,1091 @@
++/*
++ * Copyright (C) 2011-2015 Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of_device.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++#include <linux/completion.h>
++#include <linux/spinlock.h>
++#include <linux/err.h>
++#include <linux/gpio.h>
++#include <linux/pm_runtime.h>
++#include <linux/spi/spi.h>
++
++#include <lantiq_soc.h>
++
++#define SPI_RX_IRQ_NAME		"spi_rx"
++#define SPI_TX_IRQ_NAME		"spi_tx"
++#define SPI_ERR_IRQ_NAME	"spi_err"
++#define SPI_FRM_IRQ_NAME	"spi_frm"
++
++#define SPI_CLC			0x00
++#define SPI_PISEL		0x04
++#define SPI_ID			0x08
++#define SPI_CON			0x10
++#define SPI_STAT		0x14
++#define SPI_WHBSTATE		0x18
++#define SPI_TB			0x20
++#define SPI_RB			0x24
++#define SPI_RXFCON		0x30
++#define SPI_TXFCON		0x34
++#define SPI_FSTAT		0x38
++#define SPI_BRT			0x40
++#define SPI_BRSTAT		0x44
++#define SPI_SFCON		0x60
++#define SPI_SFSTAT		0x64
++#define SPI_GPOCON		0x70
++#define SPI_GPOSTAT		0x74
++#define SPI_FPGO		0x78
++#define SPI_RXREQ		0x80
++#define SPI_RXCNT		0x84
++#define SPI_DMACON		0xec
++#define SPI_IRNEN		0xf4
++#define SPI_IRNICR		0xf8
++#define SPI_IRNCR		0xfc
++
++#define SPI_CLC_SMC_S		16	/* Clock divider for sleep mode */
++#define SPI_CLC_SMC_M		(0xFF << SPI_CLC_SMC_S)
++#define SPI_CLC_RMC_S		8	/* Clock divider for normal run mode */
++#define SPI_CLC_RMC_M		(0xFF << SPI_CLC_RMC_S)
++#define SPI_CLC_DISS		BIT(1)	/* Disable status bit */
++#define SPI_CLC_DISR		BIT(0)	/* Disable request bit */
++
++#define SPI_ID_TXFS_S		24	/* Implemented TX FIFO size */
++#define SPI_ID_TXFS_M		(0x3F << SPI_ID_TXFS_S)
++#define SPI_ID_RXFS_S		16	/* Implemented RX FIFO size */
++#define SPI_ID_RXFS_M		(0x3F << SPI_ID_RXFS_S)
++#define SPI_ID_REV_M		0x1F	/* Hardware revision number */
++#define SPI_ID_CFG		BIT(5)	/* DMA interface support */
++
++#define SPI_CON_BM_S		16	/* Data width selection */
++#define SPI_CON_BM_M		(0x1F << SPI_CON_BM_S)
++#define SPI_CON_EM		BIT(24)	/* Echo mode */
++#define SPI_CON_IDLE		BIT(23)	/* Idle bit value */
++#define SPI_CON_ENBV		BIT(22)	/* Enable byte valid control */
++#define SPI_CON_RUEN		BIT(12)	/* Receive underflow error enable */
++#define SPI_CON_TUEN		BIT(11)	/* Transmit underflow error enable */
++#define SPI_CON_AEN		BIT(10)	/* Abort error enable */
++#define SPI_CON_REN		BIT(9)	/* Receive overflow error enable */
++#define SPI_CON_TEN		BIT(8)	/* Transmit overflow error enable */
++#define SPI_CON_LB		BIT(7)	/* Loopback control */
++#define SPI_CON_PO		BIT(6)	/* Clock polarity control */
++#define SPI_CON_PH		BIT(5)	/* Clock phase control */
++#define SPI_CON_HB		BIT(4)	/* Heading control */
++#define SPI_CON_RXOFF		BIT(1)	/* Switch receiver off */
++#define SPI_CON_TXOFF		BIT(0)	/* Switch transmitter off */
++
++#define SPI_STAT_RXBV_S		28
++#define SPI_STAT_RXBV_M		(0x7 << SPI_STAT_RXBV_S)
++#define SPI_STAT_BSY		BIT(13)	/* Busy flag */
++#define SPI_STAT_RUE		BIT(12)	/* Receive underflow error flag */
++#define SPI_STAT_TUE		BIT(11)	/* Transmit underflow error flag */
++#define SPI_STAT_AE		BIT(10)	/* Abort error flag */
++#define SPI_STAT_RE		BIT(9)	/* Receive error flag */
++#define SPI_STAT_TE		BIT(8)	/* Transmit error flag */
++#define SPI_STAT_ME		BIT(7)	/* Mode error flag */
++#define SPI_STAT_MS		BIT(1)	/* Master/slave select bit */
++#define SPI_STAT_EN		BIT(0)	/* Enable bit */
++
++#define SPI_WHBSTATE_SETTUE	BIT(15)	/* Set transmit underflow error flag */
++#define SPI_WHBSTATE_SETAE	BIT(14)	/* Set abort error flag */
++#define SPI_WHBSTATE_SETRE	BIT(13)	/* Set receive error flag */
++#define SPI_WHBSTATE_SETTE	BIT(12)	/* Set transmit error flag */
++#define SPI_WHBSTATE_CLRTUE	BIT(11)	/* Clear transmit underflow error flag */
++#define SPI_WHBSTATE_CLRAE	BIT(10)	/* Clear abort error flag */
++#define SPI_WHBSTATE_CLRRE	BIT(9)	/* Clear receive error flag */
++#define SPI_WHBSTATE_CLRTE	BIT(8)	/* Clear transmit error flag */
++#define SPI_WHBSTATE_SETME	BIT(7)	/* Set mode error flag */
++#define SPI_WHBSTATE_CLRME	BIT(6)	/* Clear mode error flag */
++#define SPI_WHBSTATE_SETRUE	BIT(5)	/* Set receive underflow error flag */
++#define SPI_WHBSTATE_CLRRUE	BIT(4)	/* Clear receive underflow error flag */
++#define SPI_WHBSTATE_SETMS	BIT(3)	/* Set master select bit */
++#define SPI_WHBSTATE_CLRMS	BIT(2)	/* Clear master select bit */
++#define SPI_WHBSTATE_SETEN	BIT(1)	/* Set enable bit (operational mode) */
++#define SPI_WHBSTATE_CLREN	BIT(0)	/* Clear enable bit (config mode */
++#define SPI_WHBSTATE_CLR_ERRORS	0x0F50
++
++#define SPI_RXFCON_RXFITL_S	8	/* FIFO interrupt trigger level */
++#define SPI_RXFCON_RXFITL_M	(0x3F << SPI_RXFCON_RXFITL_S)
++#define SPI_RXFCON_RXFLU	BIT(1)	/* FIFO flush */
++#define SPI_RXFCON_RXFEN	BIT(0)	/* FIFO enable */
++
++#define SPI_TXFCON_TXFITL_S	8	/* FIFO interrupt trigger level */
++#define SPI_TXFCON_TXFITL_M	(0x3F << SPI_TXFCON_TXFITL_S)
++#define SPI_TXFCON_TXFLU	BIT(1)	/* FIFO flush */
++#define SPI_TXFCON_TXFEN	BIT(0)	/* FIFO enable */
++
++#define SPI_FSTAT_RXFFL_S	0
++#define SPI_FSTAT_RXFFL_M	(0x3f << SPI_FSTAT_RXFFL_S)
++#define SPI_FSTAT_TXFFL_S	8
++#define SPI_FSTAT_TXFFL_M	(0x3f << SPI_FSTAT_TXFFL_S)
++
++#define SPI_GPOCON_ISCSBN_S	8
++#define SPI_GPOCON_INVOUTN_S	0
++
++#define SPI_FGPO_SETOUTN_S	8
++#define SPI_FGPO_CLROUTN_S	0
++
++#define SPI_RXREQ_RXCNT_M	0xFFFF	/* Receive count value */
++#define SPI_RXCNT_TODO_M	0xFFFF	/* Recevie to-do value */
++
++#define SPI_IRNEN_TFI		BIT(4)	/* TX finished interrupt */
++#define SPI_IRNEN_F		BIT(3)	/* Frame end interrupt request */
++#define SPI_IRNEN_E		BIT(2)	/* Error end interrupt request */
++#define SPI_IRNEN_T_XWAY	BIT(1)	/* Transmit end interrupt request */
++#define SPI_IRNEN_R_XWAY	BIT(0)	/* Receive end interrupt request */
++#define SPI_IRNEN_R_XRX		BIT(1)	/* Transmit end interrupt request */
++#define SPI_IRNEN_T_XRX		BIT(0)	/* Receive end interrupt request */
++#define SPI_IRNEN_ALL		0x1F
++
++struct lantiq_spi_hwcfg {
++	unsigned int num_chipselect;
++	unsigned int irnen_r;
++	unsigned int irnen_t;
++};
++
++struct lantiq_spi {
++	struct spi_master		*master;
++	struct device			*dev;
++	void __iomem			*regbase;
++	struct clk			*spi_clk;
++	struct clk			*fpi_clk;
++	const struct lantiq_spi_hwcfg	*hwcfg;
++
++	spinlock_t			lock;
++	struct completion		xfer_complete;
++
++	const u8			*tx;
++	u8				*rx;
++	unsigned int			tx_todo;
++	unsigned int			rx_todo;
++	unsigned int			bits_per_word;
++	unsigned int			speed_hz;
++	int				status;
++	unsigned long			timeout;
++	unsigned int			cs_delay;
++};
++
++struct lantiq_spi_cstate {
++	int cs_gpio;
++};
++
++static u32 lantiq_spi_readl(const struct lantiq_spi *spi, u32 reg)
++{
++	return readl_be(spi->regbase + reg);
++}
++
++static void lantiq_spi_writel(const struct lantiq_spi *spi, u32 val, u32 reg)
++{
++	writel_be(val, spi->regbase + reg);
++}
++
++static void lantiq_spi_maskl(const struct lantiq_spi *spi, u32 clr, u32 set,
++				u32 reg)
++{
++	u32 val = readl_be(spi->regbase + reg);
++	val &= ~clr;
++	val |= set;
++	writel_be(val, spi->regbase + reg);
++}
++
++static int supports_dma(const struct lantiq_spi *spi)
++{
++	u32 id = lantiq_spi_readl(spi, SPI_ID);
++	return id & SPI_ID_CFG;
++}
++
++static unsigned int tx_fifo_size(const struct lantiq_spi *spi)
++{
++	u32 id = lantiq_spi_readl(spi, SPI_ID);
++	return (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S;
++}
++
++static unsigned int rx_fifo_size(const struct lantiq_spi *spi)
++{
++	u32 id = lantiq_spi_readl(spi, SPI_ID);
++	return (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S;
++}
++
++static unsigned int tx_fifo_level(const struct lantiq_spi *spi)
++{
++	u32 fstat = lantiq_spi_readl(spi, SPI_FSTAT);
++	return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S;
++}
++
++static unsigned int rx_fifo_level(const struct lantiq_spi *spi)
++{
++	u32 fstat = lantiq_spi_readl(spi, SPI_FSTAT);
++	return fstat & SPI_FSTAT_RXFFL_M;
++}
++
++static unsigned int tx_fifo_free(const struct lantiq_spi *spi)
++{
++	return tx_fifo_size(spi) - tx_fifo_level(spi);
++}
++
++static void rx_fifo_reset(const struct lantiq_spi *spi)
++{
++	u32 val = rx_fifo_size(spi) << SPI_RXFCON_RXFITL_S;
++	val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU;
++	lantiq_spi_writel(spi, val, SPI_RXFCON);
++}
++
++static void tx_fifo_reset(const struct lantiq_spi *spi)
++{
++	u32 val = 1 << SPI_TXFCON_TXFITL_S;
++	val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU;
++	lantiq_spi_writel(spi, val, SPI_TXFCON);
++}
++
++static void rx_fifo_flush(const struct lantiq_spi *spi)
++{
++	lantiq_spi_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON);
++}
++
++static void tx_fifo_flush(const struct lantiq_spi *spi)
++{
++	lantiq_spi_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON);
++}
++
++static int hw_is_busy(const struct lantiq_spi *spi)
++{
++	u32 stat = lantiq_spi_readl(spi, SPI_STAT);
++	return stat & SPI_STAT_BSY;
++}
++
++static void hw_enter_config_mode(const struct lantiq_spi *spi)
++{
++	lantiq_spi_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE);
++}
++
++static void hw_enter_active_mode(const struct lantiq_spi *spi)
++{
++	lantiq_spi_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE);
++}
++
++static void hw_setup_speed_hz(const struct lantiq_spi *spi,
++				unsigned int max_speed_hz)
++{
++	u32 spi_clk, brt;
++
++	/*
++	 * SPI module clock is derived from FPI bus clock dependent on
++	 * divider value in CLC.RMS which is always set to 1.
++	 *
++	 *                 f_SPI
++	 * baudrate = --------------
++	 *             2 * (BR + 1)
++	 */
++	spi_clk = clk_get_rate(spi->fpi_clk) / 2;
++
++	if (max_speed_hz > spi_clk)
++		brt = 0;
++	else
++		brt = spi_clk / max_speed_hz - 1;
++
++	if (brt > 0xFFFF)
++		brt = 0xFFFF;
++
++	dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n",
++		spi_clk, max_speed_hz, brt);
++
++	lantiq_spi_writel(spi, brt, SPI_BRT);
++}
++
++static void hw_setup_bits_per_word(const struct lantiq_spi *spi,
++					unsigned int bits_per_word)
++{
++	u32 bm;
++
++	/* CON.BM value = bits_per_word - 1 */
++	bm = (bits_per_word - 1) << SPI_CON_BM_S;
++
++	lantiq_spi_maskl(spi, SPI_CON_BM_M, bm, SPI_CON);
++}
++
++static void hw_setup_clock_mode(const struct lantiq_spi *spi,
++				unsigned int mode)
++{
++	u32 con_set = 0, con_clr = 0;
++
++	/*
++	 * SPI mode mapping in CON register:
++	 * Mode CPOL CPHA CON.PO CON.PH
++	 *  0    0    0      0      1
++	 *  1    0    1      0      0
++	 *  2    1    0      1      1
++	 *  3    1    1      1      0
++	 */
++	if (mode & SPI_CPHA)
++		con_clr |= SPI_CON_PH;
++	else
++		con_set |= SPI_CON_PH;
++
++	if (mode & SPI_CPOL)
++		con_set |= SPI_CON_PO | SPI_CON_IDLE;
++	else
++		con_clr |= SPI_CON_PO | SPI_CON_IDLE;
++
++	/* Set heading control */
++	if (mode & SPI_LSB_FIRST)
++		con_clr |= SPI_CON_HB;
++	else
++		con_set |= SPI_CON_HB;
++
++	/* Set loopback mode */
++	if (mode & SPI_LOOP)
++		con_set |= SPI_CON_LB;
++	else
++		con_clr |= SPI_CON_LB;
++
++	lantiq_spi_maskl(spi, con_clr, con_set, SPI_CON);
++}
++
++static void lantiq_spi_hw_init(const struct lantiq_spi *spi)
++{
++	/*
++	 * Set clock divider for run mode to 1 to
++	 * run at same frequency as FPI bus
++	 */
++	lantiq_spi_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC);
++
++	/* Put controller into config mode */
++	hw_enter_config_mode(spi);
++
++	/* Disable all interrupts */
++	lantiq_spi_writel(spi, 0, SPI_IRNEN);
++
++	/* Clear error flags */
++	lantiq_spi_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
++
++	/* Enable error checking, disable TX/RX */
++	lantiq_spi_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN |
++		SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
++
++	/* Setup default SPI mode */
++	hw_setup_bits_per_word(spi, spi->bits_per_word);
++	hw_setup_clock_mode(spi, SPI_MODE_0);
++
++	/* Enable master mode and clear error flags */
++	lantiq_spi_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS,
++		SPI_WHBSTATE);
++
++	/* Reset GPIO/CS registers */
++	lantiq_spi_writel(spi, 0, SPI_GPOCON);
++	lantiq_spi_writel(spi, 0xFF00, SPI_FPGO);
++
++	/* Enable and flush FIFOs */
++	rx_fifo_reset(spi);
++	tx_fifo_reset(spi);
++}
++
++static void hw_chipselect_set(struct lantiq_spi *spi, unsigned int cs)
++{
++	u32 fgpo = (1 << (cs - 1 + SPI_FGPO_SETOUTN_S));
++	lantiq_spi_writel(spi, fgpo, SPI_FPGO);
++}
++
++static void hw_chipselect_clear(struct lantiq_spi *spi, unsigned int cs)
++{
++	u32 fgpo = (1 << (cs - 1));
++	lantiq_spi_writel(spi, fgpo, SPI_FPGO);
++}
++
++static void hw_chipselect_init(struct lantiq_spi *spi, unsigned int cs,
++				unsigned int cs_high)
++{
++	u32 gpocon;
++
++	/* set GPO pin to CS mode */
++	gpocon = 1 << ((cs - 1) + SPI_GPOCON_ISCSBN_S);
++
++	/* invert GPO pin */
++	if (cs_high)
++		gpocon |= 1 << (cs - 1);
++
++	lantiq_spi_maskl(spi, 0, gpocon, SPI_GPOCON);
++}
++
++static void chipselect_enable(struct spi_device *spidev)
++{
++	struct lantiq_spi *spi = spi_master_get_devdata(spidev->master);
++	struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev);
++
++	if (cstate->cs_gpio >= 0)
++		gpio_set_value(cstate->cs_gpio, spidev->mode & SPI_CS_HIGH);
++	else
++		hw_chipselect_clear(spi, spidev->chip_select);
++
++	/* CS setup/recovery time */
++	if (spi->cs_delay)
++		ndelay(spi->cs_delay);
++}
++
++static void chipselect_disable(struct spi_device *spidev)
++{
++	struct lantiq_spi *spi = spi_master_get_devdata(spidev->master);
++	struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev);
++
++	/* CS hold time */
++	if (spi->cs_delay)
++		ndelay(spi->cs_delay);
++
++	if (cstate->cs_gpio >= 0)
++		gpio_set_value(cstate->cs_gpio, !(spidev->mode & SPI_CS_HIGH));
++	else
++		hw_chipselect_set(spi, spidev->chip_select);
++
++	/* CS setup/recovery time */
++	if (spi->cs_delay)
++		ndelay(spi->cs_delay);
++}
++
++static int lantiq_spi_setup(struct spi_device *spidev)
++{
++	struct lantiq_spi *spi = spi_master_get_devdata(spidev->master);
++	struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev);
++	int err;
++
++	if (!cstate) {
++		cstate = kzalloc(sizeof(*cstate), GFP_KERNEL);
++		if (!cstate)
++			return -ENOMEM;
++
++		spi_set_ctldata(spidev, cstate);
++		cstate->cs_gpio = -ENOENT;
++
++		if (spidev->cs_gpio >= 0) {
++			dev_dbg(spi->dev, "using chipselect %u on GPIO %d\n",
++				spidev->chip_select, spidev->cs_gpio);
++
++			err = gpio_request(spidev->cs_gpio, dev_name(spi->dev));
++			if (err)
++				return err;
++
++			gpio_direction_output(spidev->cs_gpio,
++				!(spidev->mode & SPI_CS_HIGH));
++
++			cstate->cs_gpio = spidev->cs_gpio;
++		} else {
++			dev_dbg(spi->dev, "using internal chipselect %u\n",
++				spidev->chip_select);
++
++			hw_chipselect_init(spi, spidev->chip_select,
++				spidev->mode & SPI_CS_HIGH);
++			hw_chipselect_set(spi, spidev->chip_select);
++		}
++	}
++
++	return 0;
++}
++
++static void lantiq_spi_cleanup(struct spi_device *spidev)
++{
++	struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev);
++
++	if (cstate->cs_gpio >= 0)
++		gpio_free(cstate->cs_gpio);
++
++	kfree(cstate);
++	spi_set_ctldata(spidev, NULL);
++}
++
++static void hw_setup_message(const struct lantiq_spi *spi,
++				struct spi_device *spidev)
++{
++	const struct lantiq_spi_hwcfg *hwcfg = spi->hwcfg;
++
++	hw_enter_config_mode(spi);
++	hw_setup_clock_mode(spi, spidev->mode);
++	hw_enter_active_mode(spi);
++
++	/* Enable interrupts */
++	lantiq_spi_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E,
++		SPI_IRNEN);
++}
++
++static void hw_setup_transfer(struct lantiq_spi *spi, struct spi_device *spidev,
++				struct spi_transfer *t)
++{
++	unsigned int speed_hz, bits_per_word;
++	u32 con;
++
++	if (t->speed_hz)
++		speed_hz = t->speed_hz;
++	else
++		speed_hz = spidev->max_speed_hz;
++
++	if (t->bits_per_word)
++		bits_per_word = t->bits_per_word;
++	else
++		bits_per_word = spidev->bits_per_word;
++
++	if (bits_per_word != spi->bits_per_word ||
++		speed_hz != spi->speed_hz) {
++		hw_enter_config_mode(spi);
++		hw_setup_speed_hz(spi, speed_hz);
++		hw_setup_bits_per_word(spi, bits_per_word);
++		hw_enter_active_mode(spi);
++
++		spi->speed_hz = speed_hz;
++		spi->bits_per_word = bits_per_word;
++	}
++
++	/* Configure transmitter and receiver */
++	con = lantiq_spi_readl(spi, SPI_CON);
++	if (t->tx_buf)
++		con &= ~SPI_CON_TXOFF;
++	else
++		con |= SPI_CON_TXOFF;
++
++	if (t->rx_buf)
++		con &= ~SPI_CON_RXOFF;
++	else
++		con |= SPI_CON_RXOFF;
++
++	lantiq_spi_writel(spi, con, SPI_CON);
++}
++
++static void hw_finish_message(const struct lantiq_spi *spi)
++{
++	/* Disable interrupts */
++	lantiq_spi_writel(spi, 0, SPI_IRNEN);
++
++	/* Disable transmitter and receiver */
++	lantiq_spi_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
++}
++
++static void tx_fifo_write(struct lantiq_spi *spi)
++{
++	const u8 *tx8;
++	const u16 *tx16;
++	const u32 *tx32;
++	u32 data;
++	unsigned int tx_free = tx_fifo_free(spi);
++
++	while (spi->tx_todo && tx_free) {
++		switch (spi->bits_per_word) {
++		case 8:
++			tx8 = spi->tx;
++			data = *tx8;
++			spi->tx_todo--;
++			spi->tx++;
++			break;
++		case 16:
++			tx16 = (u16 *) spi->tx;
++			data = *tx16;
++			spi->tx_todo -= 2;
++			spi->tx += 2;
++			break;
++		case 32:
++			tx32 = (u32 *) spi->tx;
++			data = *tx32;
++			spi->tx_todo -= 4;
++			spi->tx += 4;
++			break;
++		default:
++			BUG();
++		}
++
++		lantiq_spi_writel(spi, data, SPI_TB);
++		tx_free--;
++	}
++}
++
++static void rx_fifo_read_full_duplex(struct lantiq_spi *spi)
++{
++	u8 *rx8;
++	u16 *rx16;
++	u32 *rx32;
++	u32 data;
++	unsigned int rx_fill = rx_fifo_level(spi);
++
++	while (rx_fill) {
++		data = lantiq_spi_readl(spi, SPI_RB);
++
++		switch (spi->bits_per_word) {
++		case 8:
++			rx8 = spi->rx;
++			*rx8 = data;
++			spi->rx_todo--;
++			spi->rx++;
++			break;
++		case 16:
++			rx16 = (u16 *) spi->rx;
++			*rx16 = data;
++			spi->rx_todo -= 2;
++			spi->rx += 2;
++			break;
++		case 32:
++			rx32 = (u32 *) spi->rx;
++			*rx32 = data;
++			spi->rx_todo -= 4;
++			spi->rx += 4;
++			break;
++		default:
++			BUG();
++		}
++
++		rx_fill--;
++	}
++}
++
++static void rx_fifo_read_half_duplex(struct lantiq_spi *spi)
++{
++	u32 data, *rx32;
++	u8 *rx8;
++	unsigned int rxbv, shift;
++	unsigned int rx_fill = rx_fifo_level(spi);
++
++	/*
++	 * In RX-only mode the bits per word value is ignored by HW. A value
++	 * of 32 is used instead. Thus all 4 bytes per FIFO must be read.
++	 * If remaining RX bytes are less than 4, the FIFO must be read
++	 * differently. The amount of received and valid bytes is indicated
++	 * by STAT.RXBV register value.
++	 */
++	while (rx_fill) {
++		if (spi->rx_todo < 4)  {
++			rxbv = (lantiq_spi_readl(spi, SPI_STAT) &
++				SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S;
++			data = lantiq_spi_readl(spi, SPI_RB);
++
++			shift = (rxbv - 1) * 8;
++			rx8 = spi->rx;
++
++			while (rxbv) {
++				*rx8++ = (data >> shift) & 0xFF;
++				rxbv--;
++				shift -= 8;
++				spi->rx_todo--;
++				spi->rx++;
++			}
++		} else {
++			data = lantiq_spi_readl(spi, SPI_RB);
++			rx32 = (u32 *) spi->rx;
++
++			*rx32++ = data;
++			spi->rx_todo -= 4;
++			spi->rx += 4;
++		}
++		rx_fill--;
++	}
++}
++
++static void rx_request(struct lantiq_spi *spi)
++{
++	unsigned int rxreq, rxreq_max;
++
++	/*
++	 * To avoid receive overflows at high clocks it is better to request
++	 * only the amount of bytes that fits into all FIFOs. This value
++	 * depends on the FIFO size implemented in hardware.
++	 */
++	rxreq = spi->rx_todo;
++	rxreq_max = rx_fifo_size(spi) * 4;
++	if (rxreq > rxreq_max)
++		rxreq = rxreq_max;
++
++	lantiq_spi_writel(spi, rxreq, SPI_RXREQ);
++}
++
++static irqreturn_t lantiq_spi_xmit_interrupt(int irq, void *data)
++{
++	struct lantiq_spi *spi = data;
++
++	/* handle possible interrupts after device initialization */
++	if (!spi->rx && !spi->tx)
++		return IRQ_HANDLED;
++
++	if (spi->tx) {
++		if (spi->rx && spi->rx_todo)
++			rx_fifo_read_full_duplex(spi);
++
++		if (spi->tx_todo)
++			tx_fifo_write(spi);
++		else
++			goto completed;
++	} else if (spi->rx) {
++		if (spi->rx_todo) {
++			rx_fifo_read_half_duplex(spi);
++
++			if (spi->rx_todo)
++				rx_request(spi);
++			else
++				goto completed;
++		} else
++			goto completed;
++	}
++
++	return IRQ_HANDLED;
++
++completed:
++	spi->status = 0;
++	complete(&spi->xfer_complete);
++
++	return IRQ_HANDLED;
++}
++
++static irqreturn_t lantiq_spi_err_interrupt(int irq, void *data)
++{
++	struct lantiq_spi *spi = data;
++	u32 stat = lantiq_spi_readl(spi, SPI_STAT);
++
++	if (stat & SPI_STAT_RUE)
++		dev_err(spi->dev, "receive underflow error\n");
++	if (stat & SPI_STAT_TUE)
++		dev_err(spi->dev, "transmit underflow error\n");
++	if (stat & SPI_STAT_RE)
++		dev_err(spi->dev, "receive overflow error\n");
++	if (stat & SPI_STAT_TE)
++		dev_err(spi->dev, "transmit overflow error\n");
++	if (stat & SPI_STAT_ME)
++		dev_err(spi->dev, "mode error\n");
++
++	/* Disable all interrupts */
++	lantiq_spi_writel(spi, 0, SPI_IRNEN);
++
++	/* Clear error flags */
++	lantiq_spi_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
++
++	/* flush FIFOs */
++	rx_fifo_flush(spi);
++	tx_fifo_flush(spi);
++
++	/* set bad status so it can be retried */
++	spi->status = -EIO;
++	complete(&spi->xfer_complete);
++
++	return IRQ_HANDLED;
++}
++
++static int transfer_start(struct lantiq_spi *spi, struct spi_device *spidev,
++				struct spi_transfer *t)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&spi->lock, flags);
++
++	spi->tx = t->tx_buf;
++	spi->rx = t->rx_buf;
++	spi->status = -EINPROGRESS;
++
++	if (t->tx_buf) {
++		spi->tx_todo = t->len;
++
++		/* initially fill TX FIFO */
++		tx_fifo_write(spi);
++	}
++
++	if (spi->rx) {
++		spi->rx_todo = t->len;
++
++		/* start shift clock in RX-only mode */
++		if (!spi->tx)
++			rx_request(spi);
++	}
++
++	spin_unlock_irqrestore(&spi->lock, flags);
++
++	return 0;
++}
++
++static int transfer_wait_finished(struct lantiq_spi *spi)
++{
++	unsigned long timeout;
++
++	/* wait for completion by interrupt */
++	timeout = wait_for_completion_timeout(&spi->xfer_complete,
++			msecs_to_jiffies(spi->timeout));
++	if (!timeout)
++		return -EIO;
++
++	/* make sure that HW is idle */
++	timeout = jiffies + msecs_to_jiffies(spi->timeout);
++	do {
++		if (!hw_is_busy(spi))
++			return 0;
++
++		cond_resched();
++	} while (!time_after_eq(jiffies, timeout));
++
++	/* flush FIFOs on timeout */
++	rx_fifo_flush(spi);
++	tx_fifo_flush(spi);
++
++	return -EIO;
++}
++
++static int lantiq_spi_transfer_one_message(struct spi_master *master,
++						struct spi_message *msg)
++{
++	struct lantiq_spi *spi = spi_master_get_devdata(master);
++	struct spi_device *spidev = msg->spi;
++	struct spi_transfer *t;
++	int status;
++	unsigned int cs_change = 1;
++
++	hw_setup_message(spi, spidev);
++
++	list_for_each_entry(t, &msg->transfers, transfer_list) {
++		reinit_completion(&spi->xfer_complete);
++
++		hw_setup_transfer(spi, spidev, t);
++
++		if (cs_change)
++			chipselect_enable(spidev);
++		cs_change = t->cs_change;
++
++		status = transfer_start(spi, spidev, t);
++		if (status) {
++			dev_err(spi->dev, "failed to start transfer\n");
++			goto done;
++		}
++
++		status = transfer_wait_finished(spi);
++		if (status) {
++			dev_err(spi->dev, "transfer timeout\n");
++			goto done;
++		}
++
++		status = spi->status;
++		if (status) {
++			dev_err(spi->dev, "transfer failed\n");
++			goto done;
++		}
++
++		msg->actual_length += t->len;
++
++		if (t->delay_usecs)
++			udelay(t->delay_usecs);
++
++		if (cs_change)
++			chipselect_disable(spidev);
++	}
++
++done:
++	msg->status = status;
++
++	if (!(status == 0 && cs_change))
++		chipselect_disable(spidev);
++
++	spi_finalize_current_message(master);
++	hw_finish_message(spi);
++
++	return status;
++}
++
++static int lantiq_spi_prepare_transfer(struct spi_master *master)
++{
++	struct lantiq_spi *spi = spi_master_get_devdata(master);
++
++	pm_runtime_get_sync(spi->dev);
++
++	return 0;
++}
++
++static int lantiq_spi_unprepare_transfer(struct spi_master *master)
++{
++	struct lantiq_spi *spi = spi_master_get_devdata(master);
++
++	pm_runtime_put(spi->dev);
++
++	return 0;
++}
++
++static const struct lantiq_spi_hwcfg spi_xway = {
++	.num_chipselect = 3,
++	.irnen_r = SPI_IRNEN_R_XWAY,
++	.irnen_t = SPI_IRNEN_T_XWAY,
++};
++
++static const struct lantiq_spi_hwcfg spi_xrx = {
++	.num_chipselect = 6,
++	.irnen_r = SPI_IRNEN_R_XRX,
++	.irnen_t = SPI_IRNEN_T_XRX,
++};
++
++static const struct of_device_id lantiq_spi_match[] = {
++	{ .compatible = "lantiq,spi-xway", .data = &spi_xway, }, /* DEPRECATED */
++	{ .compatible = "lantiq,ase-spi", .data = &spi_xway, },
++	{ .compatible = "lantiq,xrx100-spi", .data = &spi_xrx, },
++	{ .compatible = "lantiq,xrx200-spi", .data = &spi_xrx, },
++	{ .compatible = "lantiq,xrx330-spi", .data = &spi_xrx, },
++	{},
++};
++MODULE_DEVICE_TABLE(of, lantiq_spi_match);
++
++static int lantiq_spi_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct resource *res;
++	struct lantiq_spi *spi;
++	const struct lantiq_spi_hwcfg *hwcfg;
++	const struct of_device_id *match;
++	int err, rx_irq, tx_irq, err_irq;
++
++	match = of_match_device(lantiq_spi_match, &pdev->dev);
++	if (!match) {
++		dev_err(&pdev->dev, "no device match\n");
++		return -EINVAL;
++	}
++	hwcfg = match->data;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(&pdev->dev, "failed to get resources\n");
++		return -ENXIO;
++	}
++
++	rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME);
++	if (rx_irq < 0) {
++		dev_err(&pdev->dev, "failed to get %s\n", SPI_RX_IRQ_NAME);
++		return -ENXIO;
++	}
++
++	tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME);
++	if (tx_irq < 0) {
++		dev_err(&pdev->dev, "failed to get %s\n", SPI_TX_IRQ_NAME);
++		return -ENXIO;
++	}
++
++	err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME);
++	if (err_irq < 0) {
++		dev_err(&pdev->dev, "failed to get %s\n", SPI_ERR_IRQ_NAME);
++		return -ENXIO;
++	}
++
++	master = spi_alloc_master(&pdev->dev, sizeof(struct lantiq_spi));
++	if (!master)
++		return -ENOMEM;
++
++	spi = spi_master_get_devdata(master);
++	spi->master = master;
++	spi->dev = &pdev->dev;
++	spi->hwcfg = hwcfg;
++	platform_set_drvdata(pdev, spi);
++
++	spi->regbase = devm_ioremap_resource(&pdev->dev, res);
++	if (IS_ERR(spi->regbase)) {
++		err = PTR_ERR(spi->regbase);
++		goto err_master_put;
++	}
++
++	err = devm_request_irq(&pdev->dev, rx_irq, lantiq_spi_xmit_interrupt, 0,
++		SPI_RX_IRQ_NAME, spi);
++	if (err)
++		goto err_master_put;
++
++	err = devm_request_irq(&pdev->dev, tx_irq, lantiq_spi_xmit_interrupt, 0,
++		SPI_TX_IRQ_NAME, spi);
++	if (err)
++		goto err_master_put;
++
++	err = devm_request_irq(&pdev->dev, err_irq, lantiq_spi_err_interrupt, 0,
++		SPI_ERR_IRQ_NAME, spi);
++	if (err)
++		goto err_master_put;
++
++	spi->spi_clk = clk_get(&pdev->dev, NULL);
++	if (IS_ERR(spi->spi_clk)) {
++		err = PTR_ERR(spi->spi_clk);
++		goto err_master_put;
++	}
++	clk_prepare_enable(spi->spi_clk);
++
++	spi->fpi_clk = clk_get_fpi();
++	if (IS_ERR(spi->fpi_clk)) {
++		err = PTR_ERR(spi->fpi_clk);
++		goto err_clk_disable;
++	}
++
++	init_completion(&spi->xfer_complete);
++	spin_lock_init(&spi->lock);
++	spi->timeout = 2000;
++	spi->cs_delay = 100;
++	spi->bits_per_word = 8;
++	spi->speed_hz = 0;
++
++	master->dev.of_node = pdev->dev.of_node;
++	master->bus_num = 0;
++	master->num_chipselect = hwcfg->num_chipselect;
++	master->setup = lantiq_spi_setup;
++	master->cleanup = lantiq_spi_cleanup;
++	master->prepare_transfer_hardware = lantiq_spi_prepare_transfer;
++	master->transfer_one_message = lantiq_spi_transfer_one_message;
++	master->unprepare_transfer_hardware = lantiq_spi_unprepare_transfer;
++	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH |
++				SPI_LOOP;
++
++	lantiq_spi_hw_init(spi);
++
++	err = spi_register_master(master);
++	if (err) {
++		dev_err(&pdev->dev, "failed to register spi_master\n");
++		goto err_clk_put;
++	}
++
++	dev_info(&pdev->dev,
++		"Lantiq SPI controller (TXFS %u, RXFS %u, DMA %u)\n",
++		tx_fifo_size(spi), rx_fifo_size(spi), supports_dma(spi));
++
++	return 0;
++
++err_clk_put:
++	clk_put(spi->fpi_clk);
++err_clk_disable:
++	clk_disable_unprepare(spi->spi_clk);
++	clk_put(spi->spi_clk);
++err_master_put:
++	platform_set_drvdata(pdev, NULL);
++	spi_master_put(master);
++
++	return err;
++}
++
++static int lantiq_spi_remove(struct platform_device *pdev)
++{
++	struct lantiq_spi *spi = platform_get_drvdata(pdev);
++	struct spi_master *master = spi->master;
++
++	spi_unregister_master(master);
++
++	lantiq_spi_writel(spi, 0, SPI_IRNEN);
++	rx_fifo_flush(spi);
++	tx_fifo_flush(spi);
++	hw_enter_config_mode(spi);
++
++	clk_disable_unprepare(spi->spi_clk);
++	clk_put(spi->spi_clk);
++	clk_put(spi->fpi_clk);
++
++	platform_set_drvdata(pdev, NULL);
++	spi_master_put(master);
++
++	return 0;
++}
++
++static struct platform_driver lantiq_spi_driver = {
++	.probe = lantiq_spi_probe,
++	.remove = lantiq_spi_remove,
++	.driver = {
++		.name = "spi-lantiq",
++		.owner = THIS_MODULE,
++		.of_match_table = lantiq_spi_match,
++	},
++};
++module_platform_driver(lantiq_spi_driver);
++
++MODULE_DESCRIPTION("Lantiq SPI controller driver");
++MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck at gmail.com>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:spi-lantiq");
diff --git a/target/linux/lantiq/patches-4.4/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-4.4/0151-lantiq-ifxmips_pcie-use-of.patch
new file mode 100644
index 0000000..ed7927e
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0151-lantiq-ifxmips_pcie-use-of.patch
@@ -0,0 +1,158 @@
+--- a/arch/mips/pci/ifxmips_pcie.c
++++ b/arch/mips/pci/ifxmips_pcie.c
+@@ -18,6 +18,9 @@
+ #include <linux/pci_regs.h>
+ #include <linux/module.h>
+ 
++#include <linux/of_gpio.h>
++#include <linux/of_platform.h>
++
+ #include "ifxmips_pcie.h"
+ #include "ifxmips_pcie_reg.h"
+ 
+@@ -40,6 +43,7 @@
+ static DEFINE_SPINLOCK(ifx_pcie_lock);
+ 
+ u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
++static int pcie_reset_gpio;
+ 
+ static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
+     {
+@@ -82,6 +86,22 @@ void ifx_pcie_debug(const char *fmt, ...
+ 	printk("%s", buf);
+ }
+ 
++static inline void pcie_ep_gpio_rst_init(int pcie_port)
++{
++	gpio_direction_output(pcie_reset_gpio, 1);
++	gpio_set_value(pcie_reset_gpio, 1);
++}
++
++static inline void pcie_device_rst_assert(int pcie_port)
++{
++	gpio_set_value(pcie_reset_gpio, 0);
++}
++
++static inline void pcie_device_rst_deassert(int pcie_port)
++{
++	mdelay(100);
++	gpio_direction_output(pcie_reset_gpio, 1);
++}
+ 
+ static inline int pcie_ltssm_enable(int pcie_port)
+ {
+@@ -1045,8 +1065,9 @@ pcie_rc_initialize(int pcie_port)
+ 	return 0;
+ }
+ 
+-static int __init ifx_pcie_bios_init(void)
++static int __init ifx_pcie_bios_probe(struct platform_device *pdev)
+ {
++    struct device_node *node = pdev->dev.of_node;
+     void __iomem *io_map_base;
+     int pcie_port;
+     int startup_port;
+@@ -1055,7 +1076,17 @@ static int __init ifx_pcie_bios_init(voi
+     pcie_ahb_pmu_setup();
+ 
+     startup_port = IFX_PCIE_PORT0;
+-    
++
++    pcie_reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
++    if (gpio_is_valid(pcie_reset_gpio)) {
++        int ret = devm_gpio_request(&pdev->dev, pcie_reset_gpio, "pcie-reset");
++        if (ret) {
++            dev_err(&pdev->dev, "failed to request gpio %d\n", pcie_reset_gpio);
++            return ret;
++        }
++        gpio_direction_output(pcie_reset_gpio, 1);
++    }
++
+     for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
+ 	if (pcie_rc_initialize(pcie_port) == 0) {
+ 	    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", 
+@@ -1083,6 +1114,30 @@ static int __init ifx_pcie_bios_init(voi
+ 
+     return 0;
+ }
++
++static const struct of_device_id ifxmips_pcie_match[] = {
++        { .compatible = "lantiq,pcie-xrx200" },
++        {},
++};
++MODULE_DEVICE_TABLE(of, ifxmips_pcie_match);
++
++static struct platform_driver ltq_pci_driver = {
++        .probe = ifx_pcie_bios_probe,
++        .driver = {
++                .name = "pcie-xrx200",
++                .owner = THIS_MODULE,
++                .of_match_table = ifxmips_pcie_match,
++        },
++};
++
++int __init ifx_pcie_bios_init(void)
++{
++        int ret = platform_driver_register(&ltq_pci_driver);
++        if (ret)
++                pr_info("pcie-xrx200: Error registering platform driver!");
++        return ret;
++}
++
+ arch_initcall(ifx_pcie_bios_init);
+ 
+ MODULE_LICENSE("GPL");
+--- a/arch/mips/pci/ifxmips_pcie_vr9.h
++++ b/arch/mips/pci/ifxmips_pcie_vr9.h
+@@ -22,8 +22,6 @@
+ #include <linux/gpio.h>
+ #include <lantiq_soc.h>
+ 
+-#define IFX_PCIE_GPIO_RESET  494
+-
+ #define IFX_REG_R32    ltq_r32
+ #define IFX_REG_W32    ltq_w32
+ #define CONFIG_IFX_PCIE_HW_SWAP
+@@ -53,21 +51,6 @@
+ #define OUT			((volatile u32*)(IFX_GPIO + 0x0070))
+ 
+ 
+-static inline void pcie_ep_gpio_rst_init(int pcie_port)
+-{
+-
+-	gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset");
+-	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
+-	gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
+-
+-/*    ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-    ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-    ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-    ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-    ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/
+-}
+-
+ static inline void pcie_ahb_pmu_setup(void) 
+ {
+ 	/* Enable AHB bus master/slave */
+@@ -180,20 +163,6 @@ static inline void pcie_phy_rst_deassert
+     IFX_REG_W32(reg, IFX_RCU_RST_REQ);
+ }
+ 
+-static inline void pcie_device_rst_assert(int pcie_port)
+-{
+-	gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
+-//    ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-}
+-
+-static inline void pcie_device_rst_deassert(int pcie_port)
+-{
+-    mdelay(100);
+-	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
+-//    gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
+-    //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
+-}
+-
+ static inline void pcie_core_pmu_setup(int pcie_port)
+ {
+ 	struct clk *clk;
diff --git a/target/linux/lantiq/patches-4.4/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-4.4/0160-owrt-lantiq-multiple-flash.patch
new file mode 100644
index 0000000..087d923
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0160-owrt-lantiq-multiple-flash.patch
@@ -0,0 +1,222 @@
+--- a/drivers/mtd/maps/lantiq-flash.c
++++ b/drivers/mtd/maps/lantiq-flash.c
+@@ -19,6 +19,7 @@
+ #include <linux/mtd/cfi.h>
+ #include <linux/platform_device.h>
+ #include <linux/mtd/physmap.h>
++#include <linux/mtd/concat.h>
+ #include <linux/of.h>
+ 
+ #include <lantiq_soc.h>
+@@ -38,13 +39,16 @@ enum {
+ 	LTQ_NOR_NORMAL
+ };
+ 
++#define MAX_RESOURCES		4
++
+ struct ltq_mtd {
+-	struct resource *res;
+-	struct mtd_info *mtd;
+-	struct map_info *map;
++	struct mtd_info *mtd[MAX_RESOURCES];
++	struct mtd_info	*cmtd;
++	struct map_info map[MAX_RESOURCES];
+ };
+ 
+ static const char ltq_map_name[] = "ltq_nor";
++static const char * const ltq_probe_types[] = { "cmdlinepart", "ofpart", NULL };
+ 
+ static map_word
+ ltq_read16(struct map_info *map, unsigned long adr)
+@@ -108,12 +112,44 @@ ltq_copy_to(struct map_info *map, unsign
+ }
+ 
+ static int
++ltq_mtd_remove(struct platform_device *pdev)
++{
++	struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
++	int i;
++
++	if (ltq_mtd == NULL)
++		return 0;
++
++	if (ltq_mtd->cmtd) {
++		mtd_device_unregister(ltq_mtd->cmtd);
++		if (ltq_mtd->cmtd != ltq_mtd->mtd[0])
++			mtd_concat_destroy(ltq_mtd->cmtd);
++	}
++
++	for (i = 0; i < MAX_RESOURCES; i++) {
++		if (ltq_mtd->mtd[i] != NULL)
++			map_destroy(ltq_mtd->mtd[i]);
++	}
++
++	kfree(ltq_mtd);
++
++	return 0;
++}
++
++static int
+ ltq_mtd_probe(struct platform_device *pdev)
+ {
+ 	struct mtd_part_parser_data ppdata;
+ 	struct ltq_mtd *ltq_mtd;
+ 	struct cfi_private *cfi;
+-	int err;
++	int err = 0;
++	int i;
++	int devices_found = 0;
++
++	static const char *rom_probe_types[] = {
++		"cfi_probe", "jedec_probe", NULL
++	};
++	const char **type;
+ 
+ 	if (of_machine_is_compatible("lantiq,falcon") &&
+ 			(ltq_boot_select() != BS_FLASH)) {
+@@ -127,75 +163,90 @@ ltq_mtd_probe(struct platform_device *pd
+ 
+ 	platform_set_drvdata(pdev, ltq_mtd);
+ 
+-	ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+-	if (!ltq_mtd->res) {
+-		dev_err(&pdev->dev, "failed to get memory resource\n");
+-		return -ENOENT;
++	for (i = 0; i < pdev->num_resources; i++) {
++		printk(KERN_NOTICE "lantiq nor flash device: %.8llx at %.8llx\n",
++		       (unsigned long long)resource_size(&pdev->resource[i]),
++		       (unsigned long long)pdev->resource[i].start);
++	
++		if (!devm_request_mem_region(&pdev->dev,
++			pdev->resource[i].start,
++			resource_size(&pdev->resource[i]),
++			dev_name(&pdev->dev))) {
++			dev_err(&pdev->dev, "Could not reserve memory region\n");
++			return -ENOMEM;
++		}
++
++		ltq_mtd->map[i].name = ltq_map_name;
++		ltq_mtd->map[i].bankwidth = 2;
++		ltq_mtd->map[i].read = ltq_read16;
++		ltq_mtd->map[i].write = ltq_write16;
++		ltq_mtd->map[i].copy_from = ltq_copy_from;
++		ltq_mtd->map[i].copy_to = ltq_copy_to;
++
++		if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
++			ltq_mtd->map[i].phys = NO_XIP;
++		else
++			ltq_mtd->map[i].phys = pdev->resource[i].start;
++		ltq_mtd->map[i].size = resource_size(&pdev->resource[i]);
++		ltq_mtd->map[i].virt = devm_ioremap(&pdev->dev, pdev->resource[i].start,
++						 ltq_mtd->map[i].size);
++		if (IS_ERR(ltq_mtd->map[i].virt))
++			return PTR_ERR(ltq_mtd->map[i].virt);
++
++		if (ltq_mtd->map[i].virt == NULL) {
++			dev_err(&pdev->dev, "Failed to ioremap flash region\n");
++			err = PTR_ERR(ltq_mtd->map[i].virt);
++			goto err_out;
++		}
++
++		ltq_mtd->map[i].map_priv_1 = LTQ_NOR_PROBING;
++		for (type = rom_probe_types; !ltq_mtd->mtd[i] && *type; type++)
++			ltq_mtd->mtd[i] = do_map_probe(*type, &ltq_mtd->map[i]);
++		ltq_mtd->map[i].map_priv_1 = LTQ_NOR_NORMAL;
++
++		if (!ltq_mtd->mtd[i]) {
++			dev_err(&pdev->dev, "probing failed\n");
++			return -ENXIO;
++		} else {
++			devices_found++;
++		}
++
++		ltq_mtd->mtd[i]->owner = THIS_MODULE;
++		ltq_mtd->mtd[i]->dev.parent = &pdev->dev;
++
++		cfi = ltq_mtd->map[i].fldrv_priv;
++		cfi->addr_unlock1 ^= 1;
++		cfi->addr_unlock2 ^= 1;
+ 	}
+ 
+-	ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info),
+-				    GFP_KERNEL);
+-	if (!ltq_mtd->map)
+-		return -ENOMEM;
++	if (devices_found == 1) {
++		ltq_mtd->cmtd = ltq_mtd->mtd[0];
++	} else if (devices_found > 1) {
++		/*
++		 * We detected multiple devices. Concatenate them together.
++		 */
++		ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev));
++		if (ltq_mtd->cmtd == NULL)
++			err = -ENXIO;
++	}
+ 
+-	if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
+-		ltq_mtd->map->phys = NO_XIP;
+-	else
+-		ltq_mtd->map->phys = ltq_mtd->res->start;
+-	ltq_mtd->res->start;
+-	ltq_mtd->map->size = resource_size(ltq_mtd->res);
+-	ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
+-	if (IS_ERR(ltq_mtd->map->virt))
+-		return PTR_ERR(ltq_mtd->map->virt);
+-
+-	ltq_mtd->map->name = ltq_map_name;
+-	ltq_mtd->map->bankwidth = 2;
+-	ltq_mtd->map->read = ltq_read16;
+-	ltq_mtd->map->write = ltq_write16;
+-	ltq_mtd->map->copy_from = ltq_copy_from;
+-	ltq_mtd->map->copy_to = ltq_copy_to;
+-
+-	ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING;
+-	ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map);
+-	ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL;
+-
+-	if (!ltq_mtd->mtd) {
+-		dev_err(&pdev->dev, "probing failed\n");
+-		return -ENXIO;
+-	}
+-
+-	ltq_mtd->mtd->dev.parent = &pdev->dev;
+-
+-	cfi = ltq_mtd->map->fldrv_priv;
+-	cfi->addr_unlock1 ^= 1;
+-	cfi->addr_unlock2 ^= 1;
++	ltq_mtd->cmtd->dev.parent = &pdev->dev;
+ 
+ 	ppdata.of_node = pdev->dev.of_node;
+-	err = mtd_device_parse_register(ltq_mtd->mtd, NULL, &ppdata, NULL, 0);
++	err = mtd_device_parse_register(ltq_mtd->cmtd, ltq_probe_types,
++					&ppdata, NULL, 0);
+ 	if (err) {
+ 		dev_err(&pdev->dev, "failed to add partitions\n");
+-		goto err_destroy;
++		goto err_out;
+ 	}
+ 
+ 	return 0;
+ 
+-err_destroy:
+-	map_destroy(ltq_mtd->mtd);
++err_out:
++	ltq_mtd_remove(pdev);
+ 	return err;
+ }
+ 
+-static int
+-ltq_mtd_remove(struct platform_device *pdev)
+-{
+-	struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev);
+-
+-	if (ltq_mtd && ltq_mtd->mtd) {
+-		mtd_device_unregister(ltq_mtd->mtd);
+-		map_destroy(ltq_mtd->mtd);
+-	}
+-	return 0;
+-}
+-
+ static const struct of_device_id ltq_mtd_match[] = {
+ 	{ .compatible = "lantiq,nor" },
+ 	{},
diff --git a/target/linux/lantiq/patches-4.4/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch b/target/linux/lantiq/patches-4.4/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
new file mode 100644
index 0000000..d153c52
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
@@ -0,0 +1,11 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0001.c
++++ b/drivers/mtd/chips/cfi_cmdset_0001.c
+@@ -39,7 +39,7 @@
+ /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
+ 
+ // debugging, turns off buffer write mode if set to 1
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ 
+ /* Intel chips */
+ #define I82802AB	0x00ad
-- 
2.7.0

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list