[OpenWrt-Devel] [PATCH 02/13] lantiq: Use the new pinctrl compatible strings

[Martin Blumenstingl]

These were introduced in upstream commit
be14811c03cf "pinctrl/lantiq: introduce new dedicated devicetree
bindings" and finally allow us to use the individual pins within our dts
(for example spi_clk, etc.).
Please note that this changes the number of GPIOs which are available for
some SoCs. VRX200 SoCs for example only have 50 pins, but previously 56
pins were exposed. This means that all places which are using hardcoded
GPIO numbers (which are not passed via device-tree) need to be adjusted
(because the first GPIO number is now 462, instead of 456).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 target/linux/lantiq/dts/amazonse.dtsi | 2 +-
 target/linux/lantiq/dts/ar9.dtsi      | 2 +-
 target/linux/lantiq/dts/danube.dtsi   | 2 +-
 target/linux/lantiq/dts/vr9.dtsi      | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/target/linux/lantiq/dts/amazonse.dtsi b/target/linux/lantiq/dts/amazonse.dtsi
index 13d3e73..5389446 100644
--- a/target/linux/lantiq/dts/amazonse.dtsi
+++ b/target/linux/lantiq/dts/amazonse.dtsi
@@ -90,7 +90,7 @@
 		};
 
 		gpio: pinmux at E100B10 {
-			compatible = "lantiq,pinctrl-ase";
+			compatible = "lantiq,ase-pinctrl";
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xE100B10 0xA0>;
diff --git a/target/linux/lantiq/dts/ar9.dtsi b/target/linux/lantiq/dts/ar9.dtsi
index ee4e374..f69a7ae 100644
--- a/target/linux/lantiq/dts/ar9.dtsi
+++ b/target/linux/lantiq/dts/ar9.dtsi
@@ -101,7 +101,7 @@
 		};
 
 		gpio: pinmux at E100B10 {
-			compatible = "lantiq,pinctrl-xr9";
+			compatible = "lantiq,xrx100-pinctrl";
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xE100B10 0xA0>;
diff --git a/target/linux/lantiq/dts/danube.dtsi b/target/linux/lantiq/dts/danube.dtsi
index 698196d..0a75fd9 100644
--- a/target/linux/lantiq/dts/danube.dtsi
+++ b/target/linux/lantiq/dts/danube.dtsi
@@ -123,7 +123,7 @@
 		};
 
 		gpio: pinmux at E100B10 {
-			compatible = "lantiq,pinctrl-xway";
+			compatible = "lantiq,danube-pinctrl";
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xE100B10 0xA0>;
diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi
index df63ce7..8f96358 100644
--- a/target/linux/lantiq/dts/vr9.dtsi
+++ b/target/linux/lantiq/dts/vr9.dtsi
@@ -113,7 +113,7 @@
 		};
 
 		gpio: pinmux at E100B10 {
-			compatible = "lantiq,pinctrl-xr9";
+			compatible = "lantiq,xrx200-pinctrl";
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xE100B10 0xA0>;
-- 
2.7.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel