[OpenWrt-Devel] [PATCH] mac80211: bypass otp check in ath10k initialization (needed for TP-Link Archer C2600)

[Felix Fietkau]

On 2015-12-25 19:08, Josh Bendavid wrote:
> There is a patch added here to ath10k to bypass some checks on
> startup. I believe this is related to the calibration data being
> provided in external files (dumped from the ART mtd partition at init
> time) rather than directly from the pcie board. The patch and related
> discussion is from here:
> http://lists.infradead.org/pipermail/ath10k/2015-November/006489.html.
> This has also been discussed a bit further on the ath10k list here:
> http://lists.infradead.org/pipermail/ath10k/2015-December/006613.html.
> 
> Signed-off-by: Josh Bendavid <joshbendavid at gmail.com>
I think the check should only be skipped if loading calibration data
succeeded. Actually, in that case it should not even try to fetch the
board id.

- Felix
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel