[OpenWrt-Devel] PATCH - add new BOARD am335x which supports BeagleBoneBlack + E14 Wireless Cape and am335x EVM + COM8 wifi card
Hunter, Iain
i-hunter1 at ti.com
Wed Dec 7 07:35:28 EST 2016
Hi Imre,
The purpose of this patch is to add a new BOARD called “am335x” which supports two of the commonly available AM335x +WL18xx WiFi boards. These are the BeagleBoneBlack + E14 WL1837 cape and the AM335x EVM and WL1835 COM8 cards. It has been tested in build 50018.
It is based on existing BOARD omap which confusingly supports both the Cortex A8 of AM335x and the Cortex A9 of OMAP4. As a side benefit it separates the A8 and A9 devices.
It adds new /etc/init.d/network script to insert the wl18xx drivers and iptables by default on this board.
The aim is for the default settings to support Ethernet and Wi-Fi operation.
From 3552ce67c727d867b448257aa0f33b21956334bc Mon Sep 17 00:00:00 2001
From: Iain Hunter <i-hunter1 at ti.com<mailto:i-hunter1 at ti.com>>
Date: Tue, 6 Dec 2016 17:28:04 +0000
Subject: [PATCH] This patch adds a new TARGET called am335x. It is designed to
support BeagleBoneBlack + E14 WL1837 cape and also am335x evm + WL18xxMODCOM8
card. It adds package support for wl18xx kernel modules and also user space
utilities hostapd and wpa_supplicant. Aim is Wifi and Ethernet to work with
default target configuration.
It also separates out am335x with its A8 core from the omap4 with its A9 core
in the target "omap"
---
package/boot/uboot-omap/Makefile | 3 +-
package/firmware/am33x-cm3/Makefile | 2 +-
package/kernel/linux/modules/crypto.mk | 2 +-
package/kernel/linux/modules/spi.mk | 2 +-
package/kernel/linux/modules/usb.mk | 18 +-
package/kernel/mac80211/Makefile | 2 +-
target/linux/am335x/Makefile | 32 +
target/linux/am335x/base-files/etc/init.d/network | 159 +++++
target/linux/am335x/base-files/etc/inittab | 5 +
target/linux/am335x/config-4.4 | 673 +++++++++++++++++++++
target/linux/am335x/image/Makefile | 48 ++
target/linux/am335x/image/ubinize.cfg | 14 +
.../patches/0001-add-e14-cape-dts-support.patch | 229 +++++++
target/linux/am335x/profiles/00-default.mk | 16 +
14 files changed, 1191 insertions(+), 14 deletions(-)
create mode 100644 target/linux/am335x/Makefile
create mode 100755 target/linux/am335x/base-files/etc/init.d/network
create mode 100644 target/linux/am335x/base-files/etc/inittab
create mode 100644 target/linux/am335x/config-4.4
create mode 100644 target/linux/am335x/image/Makefile
create mode 100644 target/linux/am335x/image/ubinize.cfg
create mode 100644 target/linux/am335x/patches/0001-add-e14-cape-dts-support.patch
create mode 100644 target/linux/am335x/profiles/00-default.mk
diff --git a/package/boot/uboot-omap/Makefile b/package/boot/uboot-omap/Makefile
index 5441bafba4..508c929198 100644
--- a/package/boot/uboot-omap/Makefile
+++ b/package/boot/uboot-omap/Makefile
@@ -45,13 +45,14 @@ define uboot/omap3_beagle
TITLE:=U-Boot for the BeagleBoard
endef
+
UBOOTS:=omap4_panda am335x_evm omap3_overo omap3_beagle
define Package/uboot/template
define Package/uboot-omap-$(1)
SECTION:=boot
CATEGORY:=Boot Loaders
- DEPENDS:=@TARGET_omap
+ DEPENDS:=@(TARGET_omap||TARGET_am335x)
TITLE:=$(2)
URL:=http://www.denx.de/wiki/U-Boot
VARIANT:=$(1)
diff --git a/package/firmware/am33x-cm3/Makefile b/package/firmware/am33x-cm3/Makefile
index 6f6d050013..863d8f5892 100644
--- a/package/firmware/am33x-cm3/Makefile
+++ b/package/firmware/am33x-cm3/Makefile
@@ -29,7 +29,7 @@ define Package/am33x-cm3
CATEGORY:=Firmware
URL:=http://arago-project.org/git/projects/?p=am33x-cm3.git
TITLE:=TI AM335x PM firmware
- DEPENDS:=@TARGET_omap
+ DEPENDS:=@(TARGET_omap||TARGET_am335x)
endef
define Build/Compile
diff --git a/package/kernel/linux/modules/crypto.mk b/package/kernel/linux/modules/crypto.mk
index 71c58d4afc..756136ae5f 100644
--- a/package/kernel/linux/modules/crypto.mk
+++ b/package/kernel/linux/modules/crypto.mk
@@ -286,7 +286,7 @@ $(eval $(call KernelPackage,crypto-hw-ppc4xx))
define KernelPackage/crypto-hw-omap
TITLE:=TI OMAP hardware crypto modules
- DEPENDS:=@TARGET_omap
+ DEPENDS:=@(TARGET_omap||TARGET_am335x)
KCONFIG:= \
CONFIG_CRYPTO_HW=y \
CONFIG_CRYPTO_DEV_OMAP_AES \
diff --git a/package/kernel/linux/modules/spi.mk b/package/kernel/linux/modules/spi.mk
index b16e26ef04..3c27566d42 100644
--- a/package/kernel/linux/modules/spi.mk
+++ b/package/kernel/linux/modules/spi.mk
@@ -93,7 +93,7 @@ $(eval $(call KernelPackage,spi-dev))
define KernelPackage/spi-omap-24xx
SUBMENU:=$(SPI_MENU)
TITLE:=SPI omap 24xx
- DEPENDS:=@(TARGET_omap24xx||TARGET_omap)
+ DEPENDS:=@(TARGET_omap24xx||TARGET_omap||TARGET_am335x)
KCONFIG:=CONFIG_SPI_OMAP24XX \
CONFIG_SPI=y \
CONFIG_SPI_MASTER=y
diff --git a/package/kernel/linux/modules/usb.mk b/package/kernel/linux/modules/usb.mk
index 0602a254ba..299bfb5667 100644
--- a/package/kernel/linux/modules/usb.mk
+++ b/package/kernel/linux/modules/usb.mk
@@ -48,7 +48,7 @@ define KernelPackage/usb-musb-hdrc
CONFIG_USB_MUSB_HOST=n \
CONFIG_USB_MUSB_DEBUG=y
DEPENDS:= \
- @(TARGET_omap||TARGET_omap24xx) +kmod-usb-gadget \
+ @(TARGET_omap||TARGET_am335x||TARGET_omap24xx) +kmod-usb-gadget \
+TARGET_omap24xx:kmod-usb-musb-tusb6010
FILES:=$(LINUX_DIR)/drivers/usb/musb/musb_hdrc.ko
AUTOLOAD:=$(call AutoLoad,46,musb_hdrc)
@@ -70,7 +70,7 @@ define KernelPackage/usb-musb-platformglue
CONFIG_USB_MUSB_AM35X=n \
CONFIG_USB_MUSB_DSPS \
CONFIG_USB_MUSB_UX500=n
- DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-musb-hdrc +kmod-usb-phy-am335x
+ DEPENDS:=@(TARGET_omap||TARGET_am335x) +kmod-usb-phy-nop +kmod-usb-musb-hdrc +kmod-usb-phy-am335x
FILES:= \
$(LINUX_DIR)/drivers/usb/musb/musb_dsps.ko \
$(LINUX_DIR)/drivers/usb/musb/musb_am335x.ko
@@ -120,7 +120,7 @@ define KernelPackage/usb-phy-am335x
KCONFIG:= \
CONFIG_AM335X_PHY_USB \
CONFIG_AM335X_CONTROL_USB
- DEPENDS:=@TARGET_omap +kmod-usb-phy-nop
+ DEPENDS:=@(TARGET_omap||TARGET_am335x) +kmod-usb-phy-nop
FILES:= \
$(LINUX_DIR)/drivers/usb/phy/phy-am335x.ko \
$(LINUX_DIR)/drivers/usb/phy/phy-am335x-control.ko
@@ -140,7 +140,7 @@ define KernelPackage/usb-phy-omap-usb2
KCONFIG:= \
CONFIG_OMAP_USB2 \
CONFIG_OMAP_CONTROL_PHY
- DEPENDS:=@TARGET_omap
+ DEPENDS:=@(TARGET_omap||TARGET_am335x)
FILES:= \
$(LINUX_DIR)/drivers/phy/phy-omap-usb2.ko \
$(LINUX_DIR)/drivers/phy/phy-omap-control.ko
@@ -158,7 +158,7 @@ $(eval $(call KernelPackage,usb-phy-omap-usb2))
define KernelPackage/usb-phy-omap-usb3
TITLE:=Support for OMAP USB3 PHY
KCONFIG:=CONFIG_OMAP_USB3
- DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2
+ DEPENDS:=@(TARGET_omap||TARGET_am335x) +kmod-usb-phy-omap-usb2
FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-omap-usb3.ko
AUTOLOAD:=$(call AutoLoad,45,phy-omap-usb3)
$(call AddDepends/usb)
@@ -174,7 +174,7 @@ $(eval $(call KernelPackage,usb-phy-omap-usb3))
define KernelPackage/usb-phy-twl4030
TITLE:=Support for TWL4030 OTG PHY
KCONFIG:=CONFIG_TWL4030_USB
- DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
+ DEPENDS:=@(TARGET_omap||TARGET_am335x) +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
FILES:=$(LINUX_DIR)/drivers/phy/phy-twl4030-usb.ko
AUTOLOAD:=$(call AutoLoad,45,phy-twl4030-usb)
$(call AddDepends/usb)
@@ -190,7 +190,7 @@ $(eval $(call KernelPackage,usb-phy-twl4030))
define KernelPackage/usb-phy-twl6030
TITLE:=Support for TWL6030 OTG PHY
KCONFIG:=CONFIG_TWL6030_USB
- DEPENDS:=@TARGET_omap +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
+ DEPENDS:=@(TARGET_omap||TARGET_am335x) +kmod-usb-phy-omap-usb2 +kmod-usb-musb-hdrc
FILES:=$(LINUX_DIR)/drivers/usb/phy/phy-twl6030-usb.ko
AUTOLOAD:=$(call AutoLoad,45,phy-twl6030-usb)
$(call AddDepends/usb)
@@ -399,7 +399,7 @@ $(eval $(call KernelPackage,usb2-fsl))
define KernelPackage/usb2-omap
TITLE:=Support for USB2 for OMAP
- DEPENDS:=@TARGET_omap +kmod-usb-phy-nop +kmod-usb-phy-am335x +kmod-usb2
+ DEPENDS:=@(TARGET_omap||TARGET_am335x) +kmod-usb-phy-nop +kmod-usb-phy-am335x +kmod-usb2
KCONFIG:=\
CONFIG_MFD_OMAP_USB_HOST=y \
CONFIG_USB_EHCI_HCD_OMAP
@@ -497,7 +497,7 @@ $(eval $(call KernelPackage,usb2-pci))
define KernelPackage/usb-dwc2
TITLE:=DWC2 USB controller driver
- DEPENDS:=+(TARGET_brcm2708||TARGET_at91||TARGET_brcm63xx||TARGET_mxs||TARGET_imx6||TARGET_omap||TARGET_socfpga):kmod-usb-gadget
+ DEPENDS:=+(TARGET_brcm2708||TARGET_at91||TARGET_brcm63xx||TARGET_mxs||TARGET_imx6||TARGET_omap||TARGET_am335x||TARGET_socfpga):kmod-usb-gadget
KCONFIG:= \
CONFIG_USB_DWC2 \
CONFIG_USB_DWC2_PCI \
diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile
index eaba6ed6b2..2727b36c91 100644
--- a/package/kernel/mac80211/Makefile
+++ b/package/kernel/mac80211/Makefile
@@ -1373,7 +1373,7 @@ endef
define KernelPackage/wlcore
$(call KernelPackage/mac80211/Default)
TITLE:=TI common driver part
- DEPENDS+= @TARGET_omap +kmod-mac80211 + at DRIVER_11N_SUPPORT
+ DEPENDS+= +kmod-mac80211 + at DRIVER_11N_SUPPORT
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko
diff --git a/target/linux/am335x/Makefile b/target/linux/am335x/Makefile
new file mode 100644
index 0000000000..b599a90289
--- /dev/null
+++ b/target/linux/am335x/Makefile
@@ -0,0 +1,32 @@
+#
+# Copyright (C) 2012-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=arm
+BOARD:=am335x
+BOARDNAME:=AM335x Boards (with WL18xx)
+FEATURES:=usb usbgadget ext4 targz fpu nand ubifs
+CPU_TYPE:=cortex-a8
+CPU_SUBTYPE:=neon
+
+KERNEL_PATCHVER:=4.4
+
+MAINTAINER:=Imre Kaloz <kaloz at openwrt.org<mailto:kaloz at openwrt.org>>
+
+KERNELNAME:=zImage dtbs
+
+include $(INCLUDE_DIR)/target.mk
+#uboot common between EVM and BBB
+#as are wl18xx drivers and required supplicant/hostapd and ipset
+DEFAULT_PACKAGES += uboot-omap-am335x_evm kmod-wlcore kmod-wl18xx \
+ ipset wpa-supplicant wpa-cli hostapd
+
+define Target/Description
+ TI BeagleBoneBlack boards
+endef
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/am335x/base-files/etc/init.d/network b/target/linux/am335x/base-files/etc/init.d/network
new file mode 100755
index 0000000000..277458e792
--- /dev/null
+++ b/target/linux/am335x/base-files/etc/init.d/network
@@ -0,0 +1,159 @@
+#!/bin/sh /etc/rc.common
+
+START=20
+STOP=90
+
+USE_PROCD=1
+
+init_switch() {
+ setup_switch() { return 0; }
+
+ include /lib/network
+ setup_switch
+}
+
+start_service() {
+ init_switch
+
+ # load wilink8 kernel modules
+ modprobe wlcore_sdio
+ modprobe wl18xx
+
+ # load iptables module for firewall to work
+ modprobe iptable_filter
+ # sysctl procd sets ip_forwarding
+
+ procd_open_instance
+ procd_set_param command /sbin/netifd
+ procd_set_param respawn
+ procd_set_param watch network.interface
+ [ -e /proc/sys/kernel/core_pattern ] && {
+ procd_set_param limits core="unlimited"
+ }
+ procd_close_instance
+}
+
+reload_service() {
+ init_switch
+ ubus call network reload
+ /sbin/wifi reload_legacy
+}
+
+stop() {
+ /sbin/wifi down
+ procd_kill network ''
+}
+
+service_running() {
+ ubus -t 30 wait_for network.interface
+ /sbin/wifi reload_legacy
+}
+
+validate_atm_bridge_section()
+{
+ uci_validate_section network "atm-bridge" "${1}" \
+ 'unit:uinteger:0' \
+ 'vci:range(32, 65535):35' \
+ 'vpi:range(0, 255):8' \
+ 'atmdev:uinteger:0' \
+ 'encaps:or("llc", "vc"):llc' \
+ 'payload:or("bridged", "routed"):bridged'
+}
+
+validate_route_section()
+{
+ uci_validate_section network route "${1}" \
+ 'interface:string' \
+ 'target:cidr4' \
+ 'netmask:netmask4' \
+ 'gateway:ip4addr' \
+ 'metric:uinteger' \
+ 'mtu:uinteger' \
+ 'table:or(range(0,65535),string)'
+}
+
+validate_route6_section()
+{
+ uci_validate_section network route6 "${1}" \
+ 'interface:string' \
+ 'target:cidr6' \
+ 'gateway:ip6addr' \
+ 'metric:uinteger' \
+ 'mtu:uinteger' \
+ 'table:or(range(0,65535),string)'
+}
+
+validate_rule_section()
+{
+ uci_validate_section network rule "${1}" \
+ 'in:string' \
+ 'out:string' \
+ 'src:cidr4' \
+ 'dest:cidr4' \
+ 'tos:range(0,31)' \
+ 'mark:string' \
+ 'invert:bool' \
+ 'lookup:or(range(0,65535),string)' \
+ 'goto:range(0,65535)' \
+ 'action:or("prohibit", "unreachable", "blackhole", "throw")'
+}
+
+validate_rule6_section()
+{
+ uci_validate_section network rule6 "${1}" \
+ 'in:string' \
+ 'out:string' \
+ 'src:cidr6' \
+ 'dest:cidr6' \
+ 'tos:range(0,31)' \
+ 'mark:string' \
+ 'invert:bool' \
+ 'lookup:or(range(0,65535),string)' \
+ 'goto:range(0,65535)' \
+ 'action:or("prohibit", "unreachable", "blackhole", "throw")'
+}
+
+validate_switch_section()
+{
+ uci_validate_section network switch "${1}" \
+ 'name:string' \
+ 'enable:bool' \
+ 'enable_vlan:bool' \
+ 'reset:bool'
+}
+
+validate_switch_vlan()
+{
+ uci_validate_section network switch_vlan "${1}" \
+ 'device:string' \
+ 'vlan:uinteger' \
+ 'ports:list(ports)'
+}
+
+service_triggers()
+{
+ procd_add_reload_trigger network wireless
+
+ procd_open_validate
+ validate_atm_bridge_section
+ validate_route_section
+ validate_route6_section
+ validate_rule_section
+ validate_rule6_section
+ validate_switch_section
+ validate_switch_vlan
+ procd_close_validate
+}
+
+restart() {
+ ifdown -a
+ sleep 1
+ trap '' TERM
+ stop "$@"
+ start "$@"
+}
+
+shutdown() {
+ ifdown -a
+ sleep 1
+}
diff --git a/target/linux/am335x/base-files/etc/inittab b/target/linux/am335x/base-files/etc/inittab
new file mode 100644
index 0000000000..33897e1020
--- /dev/null
+++ b/target/linux/am335x/base-files/etc/inittab
@@ -0,0 +1,5 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyO0::askfirst:/usr/libexec/login.sh
+ttyO2::askfirst:/usr/libexec/login.sh
+tty1::askfirst:/usr/libexec/login.sh
diff --git a/target/linux/am335x/config-4.4 b/target/linux/am335x/config-4.4
new file mode 100644
index 0000000000..88d7b3390f
--- /dev/null
+++ b/target/linux/am335x/config-4.4
@@ -0,0 +1,673 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_BANDGAP=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARM=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_AT803X_PHY=y
+CONFIG_ATA=y
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_TPS65217 is not set
+CONFIG_BCH=y
+CONFIG_BINFMT_MISC=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_SD=y
+CONFIG_BOUNCE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BUILD_BIN2C=y
+CONFIG_CACHE_L2X0=y
+# CONFIG_CHARGER_TPS65217 is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_PROBE=y
+CONFIG_CLKSRC_TI_32K=y
+# CONFIG_CLK_TWL6040 is not set
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=16
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
+CONFIG_COMMON_CLK=y
+# CONFIG_COMMON_CLK_PALMAS is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONNECTOR=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRAMFS=y
+CONFIG_CRC16=y
+CONFIG_CRC7=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRCT10DIF=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_XZ=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DDR=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_UART_8250 is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=y
+CONFIG_DISPLAY_CONNECTOR_DVI=y
+CONFIG_DISPLAY_CONNECTOR_HDMI=y
+# CONFIG_DISPLAY_ENCODER_OPA362 is not set
+CONFIG_DISPLAY_ENCODER_TFP410=y
+CONFIG_DISPLAY_ENCODER_TPD12S015=y
+CONFIG_DISPLAY_PANEL_DPI=y
+CONFIG_DISPLAY_PANEL_DSI_CM=y
+CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=y
+CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=y
+CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=y
+CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=y
+CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=y
+CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=y
+CONFIG_DM9000=y
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+CONFIG_DMADEVICES=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OMAP=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DNS_RESOLVER=y
+CONFIG_DTC=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_93CX6=y
+CONFIG_EXPORTFS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXTCON=y
+CONFIG_EXTCON_PALMAS=y
+CONFIG_EXTCON_USB_GPIO=y
+CONFIG_FANOTIFY=y
+CONFIG_FAT_FS=y
+CONFIG_FHANDLE=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_FB_OMAP2 is not set
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_OMAP=y
+CONFIG_GPIO_PALMAS=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_TPS65910=y
+CONFIG_GPIO_TWL4030=y
+CONFIG_GPIO_TWL6040=y
+CONFIG_GRACE_PERIOD=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HDMI=y
+CONFIG_HDQ_MASTER_OMAP=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_HSI=y
+CONFIG_HSI_BOARDINFO=y
+# CONFIG_HSI_CHAR is not set
+CONFIG_HWMON=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KEXEC=y
+CONFIG_KEXEC_CORE=y
+CONFIG_KEYS=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_KS8851=y
+CONFIG_KS8851_MLL=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LIBCRC32C=y
+CONFIG_LIBFDT=y
+CONFIG_LOCKD=y
+CONFIG_LOCKDEP=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+CONFIG_MACH_OMAP_GENERIC=y
+# CONFIG_MACH_OMAP_LDP is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MEMORY=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_PALMAS=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MFD_TI_AM335X_TSCADC=y
+CONFIG_MFD_TPS65217=y
+CONFIG_MFD_TPS65218=y
+CONFIG_MFD_TPS65910=y
+CONFIG_MFD_TWL4030_AUDIO=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MSDOS_FS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BCH=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_BCH=y
+CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_OOPS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+# CONFIG_MTD_UBI_BLOCK is not set
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NEON=y
+# CONFIG_NET_CADENCE is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_NET_PTP_CLASSIFY=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_USE_KERNEL_DNS=y
+# CONFIG_NFS_USE_LEGACY_DNS is not set
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OID_REGISTRY=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_DSS_DPI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_HDMI_COMMON=y
+CONFIG_OMAP2_DSS_INIT=y
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+CONFIG_OMAP3_THERMAL=y
+CONFIG_OMAP4_DSS_HDMI=y
+CONFIG_OMAP4_THERMAL=y
+CONFIG_OMAP5_DSS_HDMI=y
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_CONTROL_PHY=y
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_GPMC=y
+# CONFIG_OMAP_GPMC_DEBUG is not set
+CONFIG_OMAP_INTERCONNECT=y
+CONFIG_OMAP_INTERCONNECT_BARRIER=y
+CONFIG_OMAP_IRQCHIP=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_OCP2SCP=y
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_SSI is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_OPROFILE=y
+CONFIG_OPTPROBES=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+# CONFIG_PHY_DM816X_USB is not set
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_PALMAS is not set
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_PL310_ERRATA_727915=y
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
+CONFIG_PM=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+CONFIG_PM_CLK=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_OPP=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_POWER_AVS=y
+CONFIG_POWER_AVS_OMAP=y
+CONFIG_POWER_AVS_OMAP_CLASS3=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_PROC_EVENTS=y
+CONFIG_PROFILING=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+CONFIG_PWM_TIECAP=y
+CONFIG_PWM_TIEHRPWM=y
+CONFIG_PWM_TIPWMSS=y
+# CONFIG_PWM_TWL is not set
+# CONFIG_PWM_TWL_LED is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTA=y
+CONFIG_QUOTACTL=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_QUOTA_TREE=y
+CONFIG_RATIONAL=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_PBIAS=y
+CONFIG_REGULATOR_TI_ABB=y
+CONFIG_REGULATOR_TPS62360=y
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_REGULATOR_TPS65218=y
+CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_RTC_DRV_PALMAS=y
+# CONFIG_RTC_DRV_TPS65910 is not set
+CONFIG_RTC_DRV_TWL4030=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SCHEDSTATS=y
+CONFIG_SCHED_HRTICK=y
+CONFIG_SCHED_INFO=y
+CONFIG_SCSI=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SDIO_UART=y
+CONFIG_SECCOMP=y
+CONFIG_SECCOMP_FILTER=y
+CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_TMP102=y
+CONFIG_SENSORS_TSL2550=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+# CONFIG_SERIAL_8250_OMAP is not set
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
+CONFIG_SERIO=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+CONFIG_SMSC_PHY=y
+CONFIG_SND=y
+# CONFIG_SND_COMPRESS_OFFLOAD is not set
+CONFIG_SND_DAVINCI_SOC_MCASP=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+CONFIG_SND_DMAENGINE_PCM=y
+# CONFIG_SND_EDMA_SOC is not set
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_DMIC=y
+# CONFIG_SND_OMAP_SOC_HDMI_AUDIO is not set
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_MCPDM=y
+CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=y
+CONFIG_SND_OMAP_SOC_OMAP_TWL4030=y
+# CONFIG_SND_OMAP_SOC_RX51 is not set
+CONFIG_SND_PCM=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_DMIC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_TLV320AIC3X=y
+CONFIG_SND_SOC_TWL4030=y
+CONFIG_SND_SOC_TWL6040=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SOC_AM33XX=y
+CONFIG_SOC_AM43XX=y
+CONFIG_SOC_BUS=y
+CONFIG_SOC_HAS_OMAP2_SDRC=y
+CONFIG_SOC_OMAP3430=y
+# CONFIG_SOC_TI81XX is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+# CONFIG_SPI_OMAP24XX is not set
+CONFIG_SPI_TI_QSPI=y
+CONFIG_SRAM=y
+CONFIG_SRCU=y
+CONFIG_STACKTRACE=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SWIOTLB=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_GOV_FAIR_SHARE=y
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_THERMAL_OF=y
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_STATS=y
+# CONFIG_TI_CPPI41 is not set
+CONFIG_TI_CPSW=y
+CONFIG_TI_CPSW_ALE=y
+CONFIG_TI_CPSW_PHY_SEL=y
+CONFIG_TI_CPTS=y
+CONFIG_TI_DAVINCI_CPDMA=y
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_TI_DAVINCI_MDIO=y
+CONFIG_TI_DMA_CROSSBAR=y
+CONFIG_TI_EDMA=y
+CONFIG_TI_EMIF=y
+CONFIG_TI_PIPE3=y
+CONFIG_TI_SOC_THERMAL=y
+CONFIG_TI_THERMAL=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TRACE_CLOCK=y
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_WATCHDOG=y
+CONFIG_TWL6040_CORE=y
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_XZ=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_DWC3_OMAP is not set
+# CONFIG_USERIO is not set
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFAT_FS=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_VIDEOMODE_HELPERS=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WKUP_M3_RPROC is not set
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/am335x/image/Makefile b/target/linux/am335x/image/Makefile
new file mode 100644
index 0000000000..2367cb64a3
--- /dev/null
+++ b/target/linux/am335x/image/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2012-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+UBIFS_OPTS = -F -m 2048 -e 124KiB -c 4096 -U
+UBI_OPTS = -m 2048 -p 128KiB -s 512 -O 2048
+
+define Image/BuildKernel
+ $(CP) $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
+ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ $(CP) $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs
+ endif
+
+ ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_KERNEL),)
+ $(INSTALL_DIR) $(TARGET_DIR)/boot
+ $(CP) $(BIN_DIR)/$(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/zImage
+ endif
+ ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_DTB),)
+ $(INSTALL_DIR) $(TARGET_DIR)/boot
+ $(CP) $(DTS_DIR)/am335x*.dtb $(TARGET_DIR)/boot/
+ endif
+ -mkdir $(BIN_DIR)/dtbs
+ -$(CP) $(DTS_DIR)/am335x*.dtb $(BIN_DIR)/dtbs/
+endef
+
+define Image/Build
+ $(call Image/Build/$(1),$(1))
+endef
+
+define Image/Build/jffs2-64k
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=65536 conv=sync
+endef
+
+define Image/Build/jffs2-128k
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=131072 conv=sync
+endef
+
+define Image/Build/squashfs
+ $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=131072 conv=sync
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/am335x/image/ubinize.cfg b/target/linux/am335x/image/ubinize.cfg
new file mode 100644
index 0000000000..49d55b9840
--- /dev/null
+++ b/target/linux/am335x/image/ubinize.cfg
@@ -0,0 +1,13 @@
+[rootfs]
+# Volume mode (other option is static)
+mode=ubi
+# Source image
+image=root.ubifs
+# Volume ID in UBI image
+vol_id=0
+# Allow for dynamic resize
+vol_type=dynamic
+# Volume name
+vol_name=rootfs
+# Autoresize volume at first mount
+vol_flags=autoresize
diff --git a/target/linux/am335x/patches/0001-add-e14-cape-dts-support.patch b/target/linux/am335x/patches/0001-add-e14-cape-dts-support.patch
new file mode 100644
index 0000000000..190a489e38
--- /dev/null
+++ b/target/linux/am335x/patches/0001-add-e14-cape-dts-support.patch
@@ -0,0 +1,229 @@
+--- a/arch/arm/boot/dts/am335x-bone-e14-wl1837.dtsi 2016-12-01 14:01:33.200522175 +0000
++++ b/arch/arm/boot/dts/am335x-bone-e14-wl1837.dtsi 2016-12-01 13:57:06.016527245 +0000
+@@ -0,0 +1,156 @@
++/*
++ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <dt-bindings/interrupt-controller/irq.h>
++
++/ {
++ model = "TI AM335x BeagleBone Black";
++ compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
++
++ wlan_en_reg: fixedregulator at 1 {
++ compatible = "regulator-fixed";
++ regulator-name = "wlan-en-regulator";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ gpio = <&gpio0 2 0>;
++ enable-active-high;
++ };
++
++ tibt {
++ compatible = "tibt";
++ nshutdown_gpio = <3>; /* Bank0, pin3 */
++ dev_name = "/dev/ttyS1";
++ flow_cntrl = <1>;
++ baud_rate = <3000000>;
++ };
++
++ btwilink {
++ compatible = "btwilink";
++ };
++};
++
++&am33xx_pinmux {
++ pinctrl-0 = <&clkout2_pin>;
++
++ uart1_pins_default: pinmux_uart1_pins_default {
++ pinctrl-single,pins = <
++ 0x180 ( PIN_INPUT | MUX_MODE0 ) /* (D16) uart1_rxd.uart1_rxd */
++ 0x184 ( PIN_OUTPUT | MUX_MODE0 ) /* (D15) uart1_txd.uart1_txd */
++ 0x178 ( PIN_INPUT | MUX_MODE0 ) /* (D18) uart1_ctsn.uart1_ctsn */
++ 0x17c ( PIN_OUTPUT_PULLDOWN | MUX_MODE0 ) /* (D17) uart1_rtsn.uart1_rtsn */
++ >;
++ };
++
++ uart1_pins_sleep: pinmux_uart1_pins_sleep {
++ pinctrl-single,pins = <
++ 0x180 ( PIN_INPUT | MUX_MODE0 ) /* (D16) uart1_rxd.uart1_rxd */
++ 0x184 ( PIN_OUTPUT | MUX_MODE0 ) /* (D15) uart1_txd.uart1_txd */
++ 0x178 ( PIN_INPUT | MUX_MODE0 ) /* (D18) uart1_ctsn.uart1_ctsn */
++ 0x17c ( PIN_OUTPUT | MUX_MODE0 ) /* (D17) uart1_rtsn.uart1_rtsn */
++ >;
++ };
++
++ bt_pins_default: pinmux_bt_pins_default {
++ pinctrl-single,pins = <
++ 0x154 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpio0_3 BT_EN*/
++ >;
++ };
++
++ bt_pins_sleep: pinmux_bt_pins_sleep {
++ pinctrl-single,pins = <
++ 0x154 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpio0_3 BT_EN*/
++ >;
++ };
++
++ mmc2_pins: pinmux_mmc2_pins {
++ pinctrl-single,pins = <
++ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
++ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
++ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
++ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
++ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
++ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
++ >;
++ };
++
++ mmc2_pins_sleep: pinmux_mmc2_pins_sleep {
++ pinctrl-single,pins = <
++ 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.mmc1_clk */
++ 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.mmc1_cmd */
++ 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.mmc1_dat0 */
++ 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.mmc1_dat1 */
++ 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.mmc1_dat2 */
++ 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.mmc1_dat3 */
++ >;
++ };
++
++ wlan_pins_default: pinmux_wlan_pins_default {
++ pinctrl-single,pins = <
++ 0x150 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpio0_2 WL_EN*/
++ 0x164 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpio0_7 WL_IRQ*/
++ 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 Cape_Buffer_EN*/
++ 0x90 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 Audio_sync*/
++ >;
++ };
++
++ wlan_pins_sleep: pinmux_wlan_pins_sleep {
++ pinctrl-single,pins = <
++ 0x150 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpio0_2 WL_EN*/
++ 0x164 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpio0_7 WL_IRQ*/
++ 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 Cape_Buffer_EN*/
++ 0x90 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 Audio_sync*/
++ >;
++ };
++
++ i2c1_pins: pinmux_i2c1_pins {
++ pinctrl-single,pins = <
++ 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* i2c1 */
++ 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* i2c1 */
++ >;
++ };
++};
++
++&uart1 {
++ pinctrl-names = "default","sleep";
++ pinctrl-0 = <&uart1_pins_default &bt_pins_default>;
++ pinctrl-1 = <&uart1_pins_sleep &bt_pins_sleep>;
++ status = "okay";
++};
++
++&i2c1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins>;
++
++ status = "okay";
++ clock-frequency = <400000>;
++
++ tps1: tps at 24 {
++ reg = <0x24>;
++ };
++};
++
++&mmc2 {
++ status = "okay";
++ vmmc-supply = <&wlan_en_reg>;
++ bus-width = <4>;
++ pinctrl-names = "default", "sleep";
++ pinctrl-0 = <&mmc2_pins &wlan_pins_default>;
++ pinctrl-1 = <&mmc2_pins_sleep &wlan_pins_sleep>;
++ ti,non-removable;
++ ti,needs-special-hs-handling;
++ cap-power-off-card;
++ keep-power-in-suspend;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++ wlcore: wlcore at 0 {
++ compatible = "ti,wl1835";
++ reg = <2>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
++ };
++};
+--- a/arch/arm/boot/dts/am335x-boneblack.dts 2016-06-24 18:18:38.000000000 +0100
++++ b/arch/arm/boot/dts/am335x-boneblack.dts 2016-12-01 14:04:19.620519016 +0000
+@@ -33,64 +33,9 @@
+ status = "okay";
+ };
+
+-&am33xx_pinmux {
+- nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+- pinctrl-single,pins = <
+- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+- 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+- 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+- 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+- 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+- 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+- >;
+- };
+- nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+- pinctrl-single,pins = <
+- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+- >;
+- };
+-};
+-
+-&lcdc {
+- status = "okay";
+- port {
+- lcdc_0: endpoint at 0 {
+- remote-endpoint = <&hdmi_0>;
+- };
+- };
+-};
+-
+-&i2c0 {
+- tda19988 {
+- compatible = "nxp,tda998x";
+- reg = <0x70>;
+- pinctrl-names = "default", "off";
+- pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+- pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+-
+- port {
+- hdmi_0: endpoint at 0 {
+- remote-endpoint = <&lcdc_0>;
+- };
+- };
+- };
+-};
+-
+ &rtc {
+ system-power-controller;
+ };
++
++/* Overlay the wilink8 based cape support */
++#include "am335x-bone-e14-wl1837.dtsi"
diff --git a/target/linux/am335x/profiles/00-default.mk b/target/linux/am335x/profiles/00-default.mk
new file mode 100644
index 0000000000..3ff040d2e4
--- /dev/null
+++ b/target/linux/am335x/profiles/00-default.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Default
+ NAME:=Default Profile
+endef
+
+define Profile/Default/Description
+ Default package set compatible with most boards.
+endef
+
+$(eval $(call Profile,Default))
--
2.11.0
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the open source license
indicated in the file; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the same open source license (unless I am
permitted to submit under a different license), as indicated
in the file; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it, including my sign-off) is
maintained indefinitely and may be redistributed consistent with
this project or the open source license(s) involved.
Signed-off-by: Iain Hunter <i-hunter1 at ti.com<mailto:i-hunter1 at ti.com>>
Texas Instruments Limited. Registered address: c/o Peter F. Tomlinson & Co, 1 Northumberland Buildings, Queen Square, Bath BA1 2JB. Registered in England & Wales under company number 00574102
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20161207/1e0e74b0/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list