[OpenWrt-Devel] [PATCH v2] ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)
Matthias Schiffer
mschiffer at universe-factory.net
Mon Sep 28 22:20:04 EDT 2015
The international version is completely different from the already
supported Chinese version. The WLAN of the QCA956x SoC used by this router
has been fixed in r46948.
Signed-off-by: Matthias Schiffer <mschiffer at universe-factory.net>
---
v2: rebased on top of trunk + http://patchwork.ozlabs.org/patch/523133/
The 700-MIPS-ath79-openwrt-machines.patch should only be ~10 added lines,
but git gets confused and makes the diff completely incomprehensible...
target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
.../ar71xx/base-files/etc/uci-defaults/01_leds | 9 ++
.../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../lib/preinit/05_set_preinit_iface_ar71xx | 1 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-4.1 | 1 +
.../files/arch/mips/ath79/mach-tl-wr941nd-v6.c | 151 +++++++++++++++++++
target/linux/ar71xx/image/Makefile | 9 +-
.../700-MIPS-ath79-openwrt-machines.patch | 166 +++++++++++----------
10 files changed, 266 insertions(+), 79 deletions(-)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index cfba6b4..d97de9f 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -287,7 +287,8 @@ get_status_led() {
tl-wdr4300 | \
tl-wr703n | \
tl-wr710n | \
- tl-wr720n-v3)
+ tl-wr720n-v3 | \
+ tl-wr941nd-v6)
status_led="tp-link:blue:system"
;;
tl-wr841n-v9)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index fac4751..e8ee929 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -503,6 +503,15 @@ tl-wr941nd-v5)
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
+tl-wr941nd-v6)
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:blue:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "tp-link:blue:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "tp-link:blue:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "tp-link:blue:lan4" "switch0" "0x02"
+ ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
+ ;;
+
tl-wa830re-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 880953c..35cd05d 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -242,6 +242,7 @@ tl-mr3420-v2 |\
tl-wr841n-v8 |\
tl-wr842n-v2 |\
tl-wr941nd-v5 |\
+tl-wr941nd-v6 |\
tl-wdr6500-v2 |\
wnr2000-v3 |\
wnr2000-v4 |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index ad98cfb..6dba074 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -820,6 +820,9 @@ ar71xx_board_detect() {
*"TL-WR941N/ND v5")
name="tl-wr941nd-v5"
;;
+ *"TL-WR941N/ND v6")
+ name="tl-wr941nd-v6"
+ ;;
*"TL-WR703N v1")
name="tl-wr703n"
;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
index d214e9b..38a0382 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
@@ -36,6 +36,7 @@ set_preinit_iface() {
tl-wr720n-v3 |\
tl-wr841n-v8 |\
tl-wr842n-v2 |\
+ tl-wr941nd-v6 |\
wnr2000-v3 |\
wnr2200 |\
wnr612-v2 |\
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index c947b78..e757237 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -360,6 +360,7 @@ platform_check_image() {
tl-wr842n-v2 | \
tl-wr941nd | \
tl-wr941nd-v5 | \
+ tl-wr941nd-v6 | \
tl-wr1041n-v2 | \
tl-wr1043nd | \
tl-wr1043nd-v2 | \
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index 50dc7b2..e0cb65b 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -140,6 +140,7 @@ CONFIG_ATH79_MACH_TL_WR841N_V1=y
CONFIG_ATH79_MACH_TL_WR841N_V8=y
CONFIG_ATH79_MACH_TL_WR841N_V9=y
CONFIG_ATH79_MACH_TL_WR941ND=y
+CONFIG_ATH79_MACH_TL_WR941ND_V6=y
CONFIG_ATH79_MACH_TUBE2H=y
CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_XM=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c
new file mode 100644
index 0000000..55b4c00
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c
@@ -0,0 +1,151 @@
+/*
+ * TP-LINK TL-WR941N/ND v6 board support
+ *
+ * Copyright (C) 2015 Matthias Schiffer <mschiffer at universe-factory.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define TL_WR941ND_V6_GPIO_LED_QSS 3
+#define TL_WR941ND_V6_GPIO_LED_WAN 14
+#define TL_WR941ND_V6_GPIO_LED_WAN_RED 15
+#define TL_WR941ND_V6_GPIO_LED_LAN1 7
+#define TL_WR941ND_V6_GPIO_LED_LAN2 6
+#define TL_WR941ND_V6_GPIO_LED_LAN3 5
+#define TL_WR941ND_V6_GPIO_LED_LAN4 4
+#define TL_WR941ND_V6_GPIO_LED_WLAN 8
+#define TL_WR941ND_V6_GPIO_LED_SYSTEM 18
+
+#define TL_WR941ND_V6_GPIO_BTN_RESET 1
+#define TL_WR941ND_V6_GPIO_BTN_RFKILL 2
+
+#define TL_WR941ND_V6_KEYS_POLL_INTERVAL 20
+#define TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_V6_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led tl_wr941nd_v6_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:qss",
+ .gpio = TL_WR941ND_V6_GPIO_LED_QSS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:wan",
+ .gpio = TL_WR941ND_V6_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:red:wan",
+ .gpio = TL_WR941ND_V6_GPIO_LED_WAN_RED,
+ .active_low = 0,
+ },
+ {
+ .name = "tp-link:blue:lan1",
+ .gpio = TL_WR941ND_V6_GPIO_LED_LAN1,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:lan2",
+ .gpio = TL_WR941ND_V6_GPIO_LED_LAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:lan3",
+ .gpio = TL_WR941ND_V6_GPIO_LED_LAN3,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:lan4",
+ .gpio = TL_WR941ND_V6_GPIO_LED_LAN4,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:wlan",
+ .gpio = TL_WR941ND_V6_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:system",
+ .gpio = TL_WR941ND_V6_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr941nd_v6_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR941ND_V6_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR941ND_V6_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ }
+};
+
+
+static const char *tl_wr941n_v6_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr941n_v6_flash_data = {
+ .part_probes = tl_wr941n_v6_part_probes,
+};
+
+
+static void __init tl_wr941nd_v6_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr941n_v6_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_v6_leds_gpio),
+ tl_wr941nd_v6_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR941ND_V6_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr941nd_v6_gpio_keys),
+ tl_wr941nd_v6_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(0);
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR941ND_V6, "TL-WR941ND-v6", "TP-LINK TL-WR941N/ND v6",
+ tl_wr941nd_v6_setup);
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index b5fc396..1cccce7 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -677,6 +677,13 @@ define Device/tl-wr941nd-v5
TPLINK_HWID := 0x09410005
endef
+define Device/tl-wr941nd-v6
+ $(Device/tplink-4mlzma)
+ BOARDNAME := TL-WR941ND-v6
+ DEVICE_PROFILE := TLWR941
+ TPLINK_HWID := 0x09410006
+endef
+
# Chinese version (unline European) is similar to the TL-WDR3500
define Device/tl-wr941nd-v6-cn
$(Device/tplink-4mlzma)
@@ -684,7 +691,7 @@ define Device/tl-wr941nd-v6-cn
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410006
endef
-TARGET_DEVICES += tl-wr941nd-v5 tl-wr941nd-v6-cn
+TARGET_DEVICES += tl-wr941nd-v5 tl-wr941nd-v6 tl-wr941nd-v6-cn
define Device/tl-wr1041n-v2
$(Device/tplink-4mlzma)
diff --git a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
index 8ee0d3f..da594a5 100644
--- a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,24 +16,210 @@
+@@ -16,24 +16,211 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -158,6 +158,7 @@
+ ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
+ ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */
++ ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */
+ ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */
+ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */
+ ATH79_MACH_UBNT_AIRGWP, /* Ubiquiti AirGateway Pro */
@@ -304,7 +305,7 @@
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -11,62 +95,1107 @@ config ATH79_MACH_AP121
+@@ -11,62 +95,1116 @@ config ATH79_MACH_AP121
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
@@ -1185,10 +1186,7 @@
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
-
--config ATH79_MACH_AP136
-- bool "Atheros AP136/AP135 reference board"
-- select SOC_QCA955X
++
+config ATH79_MACH_TL_WA7210N_V2
+ bool "TP-LINK TL-WA7210N v2 support"
+ select SOC_AR724X
@@ -1203,19 +1201,12 @@
+ bool "TP-LINK TL-WA830RE v2 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_NFC
-- select ATH79_DEV_SPI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP136 or AP135 reference boards.
-
--config ATH79_MACH_AP81
-- bool "Atheros AP81 reference board"
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_TL_WA901ND
+ bool "TP-LINK TL-WA901ND/TL-WA7510N support"
+ select SOC_AR724X
@@ -1227,11 +1218,11 @@
+
+config ATH79_MACH_TL_WA901ND_V2
+ bool "TP-LINK TL-WA901ND v2 support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WDR3500
@@ -1242,34 +1233,13 @@
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP81 reference board.
-
--config ATH79_MACH_DB120
-- bool "Atheros DB120 reference board"
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_TL_WDR4300
+ bool "TP-LINK TL-WDR3600/4300/4310 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros DB120 reference board.
-
--config ATH79_MACH_PB44
-- bool "Atheros PB44 reference board"
-+config ATH79_MACH_TL_WR703N
-+ bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
-+ select SOC_AR933X
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
@@ -1277,8 +1247,8 @@
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
-+config ATH79_MACH_TL_WR720N_V3
-+ bool "TP-LINK TL-WR720N v3/v4 support"
++config ATH79_MACH_TL_WR703N
++ bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
@@ -1286,7 +1256,28 @@
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
-+
+
+-config ATH79_MACH_AP136
+- bool "Atheros AP136/AP135 reference board"
+- select SOC_QCA955X
++config ATH79_MACH_TL_WR720N_V3
++ bool "TP-LINK TL-WR720N v3/v4 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_NFC
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP136 or AP135 reference boards.
+
+-config ATH79_MACH_AP81
+- bool "Atheros AP81 reference board"
+- select SOC_AR913X
+config ATH79_MACH_TL_WR741ND
+ bool "TP-LINK TL-WR741ND support"
+ select SOC_AR724X
@@ -1299,21 +1290,25 @@
+config ATH79_MACH_TL_WR741ND_V4
+ bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR841N_V1
-+ bool "TP-LINK TL-WR841N v1 support"
- select SOC_AR71XX
-+ select ATH79_DEV_DSA
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP81 reference board.
+
+-config ATH79_MACH_DB120
+- bool "Atheros DB120 reference board"
++config ATH79_MACH_TL_WR841N_V1
++ bool "TP-LINK TL-WR841N v1 support"
++ select SOC_AR71XX
++ select ATH79_DEV_DSA
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR841N_V8
@@ -1345,17 +1340,32 @@
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
-+config ATH79_MACH_TL_WR1041N_V2
-+ bool "TP-LINK TL-WR1041N v2 support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
++config ATH79_MACH_TL_WR941ND_V6
++ bool "TP-LINK TL-WR941ND v6 support"
++ select SOC_QCA956X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_TL_WR1041N_V2
++ bool "TP-LINK TL-WR1041N v2 support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+- select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros DB120 reference board.
+
+-config ATH79_MACH_PB44
+- bool "Atheros PB44 reference board"
+config ATH79_MACH_TL_WR1043ND
+ bool "TP-LINK TL-WR1043ND support"
+ select SOC_AR913X
@@ -1398,11 +1408,12 @@
+
+config ATH79_MACH_TEW_673GRU
+ bool "TRENDnet TEW-673GRU support"
-+ select SOC_AR71XX
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_NVRAM
@@ -1440,7 +1451,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1212,116 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1221,116 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@@ -1557,7 +1568,7 @@
endmenu
config SOC_AR71XX
-@@ -134,7 +1373,10 @@ config ATH79_DEV_DSA
+@@ -134,7 +1382,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@@ -1569,7 +1580,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -164,6 +1406,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,6 +1415,11 @@ config ATH79_PCI_ATH9K_FIXUP
def_bool n
config ATH79_ROUTERBOOT
@@ -1583,7 +1594,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,135 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,136 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@@ -1684,6 +1695,7 @@
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o
+obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o
--
2.5.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list