[OpenWrt-Devel] [PATCH 1/3] ramips: Add DTS files for HiWiFi HC5x61 models
Comman Kang
kangxn at 163.com
Mon Sep 28 06:45:49 EDT 2015
HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
The original author is Justin Liu (rssnsj at gmail.com). I ported the patch to trunk and submitted it here with his approval.
Signed-off-by: Xiaoning Kang <kangxn at 163.com>
diff --git a/target/linux/ramips/dts/HiWiFi-HC5661.dts b/target/linux/ramips/dts/HiWiFi-HC5661.dts
new file mode 100644
index 0000000..f3ca70c
--- /dev/null
+++ b/target/linux/ramips/dts/HiWiFi-HC5661.dts
@@ -0,0 +1,162 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "HiWiFi-HC5661", "ralink,mt7620a-soc";
+ model = "HiWiFi HC5661";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus at 10000000 {
+ sysc at 0 {
+ ralink,gpiomux = "i2c", "jtag";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+ gpio0: gpio at 600 {
+ status = "okay";
+ };
+ gpio2: gpio at 660 {
+ status = "okay";
+ };
+ gpio3: gpio at 688 {
+ status = "okay";
+ };
+
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition at fd0000 {
+ label = "hwf_config";
+ reg = <0xfd0000 0x10000>;
+ };
+
+ bdinfo: partition at fe0000 {
+ label = "bdinfo";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ partition at ff0000 {
+ label = "backup";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ ethernet at 10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+ };
+
+ sdhci at 10130000 {
+ status = "okay";
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pcie at 10140000 {
+ status = "okay";
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ system {
+ label = "hiwifi-5661:blue:system";
+ gpios = <&gpio0 9 1>;
+ };
+ internet {
+ label = "hiwifi-5661:blue:internet";
+ gpios = <&gpio0 11 1>;
+ };
+ wlan2p4 {
+ label = "hiwifi-5661:blue:wlan-2p4";
+ gpios = <&gpio3 0 1>;
+ };
+ wlan5p {
+ label = "hiwifi-5661:blue:wlan-5p";
+ gpios = <&gpio0 7 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 13 0>;
+ };
+ };
+
+};
+
diff --git a/target/linux/ramips/dts/HiWiFi-HC5761.dts b/target/linux/ramips/dts/HiWiFi-HC5761.dts
new file mode 100644
index 0000000..1340751
--- /dev/null
+++ b/target/linux/ramips/dts/HiWiFi-HC5761.dts
@@ -0,0 +1,162 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "HiWiFi-HC5761", "ralink,mt7620a-soc";
+ model = "HiWiFi HC5761";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus at 10000000 {
+ sysc at 0 {
+ ralink,gpiomux = "i2c", "jtag";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+ gpio0: gpio at 600 {
+ status = "okay";
+ };
+ gpio2: gpio at 660 {
+ status = "okay";
+ };
+ gpio3: gpio at 688 {
+ status = "okay";
+ };
+
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition at fd0000 {
+ label = "hwf_config";
+ reg = <0xfd0000 0x10000>;
+ };
+
+ bdinfo: partition at fe0000 {
+ label = "bdinfo";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ partition at ff0000 {
+ label = "backup";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ ethernet at 10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+ };
+
+ sdhci at 10130000 {
+ status = "okay";
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pcie at 10140000 {
+ status = "okay";
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ system {
+ label = "hiwifi-5761:blue:system";
+ gpios = <&gpio0 9 1>;
+ };
+ internet {
+ label = "hiwifi-5761:blue:internet";
+ gpios = <&gpio0 11 1>;
+ };
+ wlan2p4 {
+ label = "hiwifi-5761:blue:wlan-2p4";
+ gpios = <&gpio3 0 1>;
+ };
+ wlan5p {
+ label = "hiwifi-5761:blue:wlan-5p";
+ gpios = <&gpio0 7 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 13 0>;
+ };
+ };
+
+};
+
diff --git a/target/linux/ramips/dts/HiWiFi-HC5861.dts b/target/linux/ramips/dts/HiWiFi-HC5861.dts
new file mode 100644
index 0000000..2d68e69
--- /dev/null
+++ b/target/linux/ramips/dts/HiWiFi-HC5861.dts
@@ -0,0 +1,203 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "HiWiFi-HC5861", "ralink,mt7620a-soc";
+ model = "HiWiFi HC5861";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus at 10000000 {
+ sysc at 0 {
+ ralink,gpiomux = "i2c", "jtag";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+ gpio0: gpio at 600 {
+ status = "okay";
+ };
+ gpio2: gpio at 660 {
+ status = "okay";
+ };
+ gpio3: gpio at 688 {
+ status = "okay";
+ };
+
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition at fd0000 {
+ label = "hwf_config";
+ reg = <0xfd0000 0x10000>;
+ };
+
+ bdinfo: partition at fe0000 {
+ label = "bdinfo";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ partition at ff0000 {
+ label = "backup";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ ethernet at 10100000 {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ ralink,port-map = "wllll";
+
+ port at 4 {
+ status = "okay";
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii";
+ };
+
+ port at 5 {
+ status = "okay";
+ phy-handle = <&phy5>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy4: ethernet-phy at 4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ phy5: ethernet-phy at 5 {
+ reg = <5>;
+ phy-mode = "rgmii";
+ };
+ };
+ };
+
+ gsw at 10110000 {
+ ralink,port4 = "gmac";
+ };
+
+ sdhci at 10130000 {
+ status = "okay";
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pcie at 10140000 {
+ status = "okay";
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ system {
+ label = "hiwifi-5861:blue:system";
+ gpios = <&gpio0 9 1>;
+ };
+ wlan2p4 {
+ label = "hiwifi-5861:blue:wlan-2p4";
+ gpios = <&gpio0 11 1>;
+ };
+ internet {
+ label = "hiwifi-5861:blue:internet";
+ gpios = <&gpio3 0 1>;
+ };
+ wlan5p {
+ label = "hiwifi-5861:blue:wlan-5p";
+ gpios = <&gpio0 7 1>;
+ };
+ turbo {
+ label = "hiwifi-5861:blue:turbo";
+ gpios = <&gpio0 10 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 13 0>;
+ };
+ sdpower {
+ gpio-export,name = "sdpower";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 8 0>;
+ };
+ };
+
+};
+
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list