[OpenWrt-Devel] [PATCH 4/4] ramips: Enable rx of 1536 bytes ethernet frames on MT7621
Sven Eckelmann
sven at open-mesh.com
Fri Sep 25 07:11:11 EDT 2015
The default switch frame size (with FCS + header) is 1536 bytes. But the
GMAC only accepted frames up to 1522 bytes. Setting it to 1536 allows to
receive ethernet frames using the full of MTU 1500 + an extra VLAN header +
VLAN header added by the switch.
Signed-off-by: Sven Eckelmann <sven at open-mesh.com>
---
.../linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620a.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620a.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620a.c
index 8039704..325e243 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620a.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620a.c
@@ -602,12 +602,12 @@ static void gsw_hw_init_mt7621(struct mt7620_gsw *gsw, struct device_node *np)
udelay(10);
if ((rt_sysc_r32(SYSC_REG_CHIP_REV_ID) & 0xFFFF) == 0x0101) {
- /* (GE1, Force 1000M/FD, FC ON) */
- gsw_w32(gsw, 0x2005e30b, 0x100);
+ /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */
+ gsw_w32(gsw, 0x2105e30b, 0x100);
mt7530_mdio_w32(gsw, 0x3600, 0x5e30b);
} else {
- /* (GE1, Force 1000M/FD, FC ON) */
- gsw_w32(gsw, 0x2005e33b, 0x100);
+ /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */
+ gsw_w32(gsw, 0x2105e33b, 0x100);
mt7530_mdio_w32(gsw, 0x3600, 0x5e33b);
}
--
2.5.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list