[OpenWrt-Devel] [PATCH] target/mpc85xx: add cuImage.tl-wdr4900-v1 kernel image if CONFIG_TL_WDR4900_V1=y

[Alexandru Ardelean]

On Tue, Sep 22, 2015 at 4:05 PM, Matthias Schiffer <
mschiffer at universe-factory.net> wrote:

> On 09/22/2015 06:25 PM, Alexandru Ardelean wrote:
> > From: Alexandru Ardelean <aa at ocedo.com>
> >
> > Signed-off-by: Alexandru Ardelean <ardeleanalex at gmail.com>
> > ---
> >  target/linux/mpc85xx/Makefile | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/target/linux/mpc85xx/Makefile
> b/target/linux/mpc85xx/Makefile
> > index e43327a..bfc2c8d 100644
> > --- a/target/linux/mpc85xx/Makefile
> > +++ b/target/linux/mpc85xx/Makefile
> > @@ -16,7 +16,10 @@ SUBTARGETS=generic p1020
> >
> >  KERNEL_PATCHVER:=3.18
> >
> > -KERNEL_IMAGES := zImage cuImage.tl-wdr4900-v1
> > +KERNEL_IMAGES := zImage
> > +ifeq ($(CONFIG_TL_WDR4900_V1),y)
> > +KERNEL_IMAGES += cuImage.tl-wdr4900-v1
> > +endif
> >
> >  include $(INCLUDE_DIR)/target.mk
> >
> >
>
> This doesn't work, CONFIG_TL_WDR4900_V1 is a kernel .config option, not
> a OpenWrt .config option, and thus isn't available in OpenWrt Makefiles.
> What is this supposed to fix?
>

Seems I'm confused here with the makefiles.

For our case, removing that kernel image file is needed, because we build
our own mpc85xx image that is different from wdr4900-v1 ; so no file named
cuImage.tl-wdr4900-v1.
Ideally, I'd like to put it under a config option that disables/enables
this ; I will admit that I haven't tried the case where this is on.

I'll try to find another option that disables this, that can also enable it.
Any suggestions ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150922/fc6e5f72/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel