[OpenWrt-Devel] [PATCH] comgt-ncm: Add possibility to choose PDP context type
Matti Laakso
malaakso at elisanet.fi
Mon Sep 21 01:53:40 EDT 2015
> Date: Sun, 20 Sep 2015 23:52:32 +0300
> Subject: Re: [OpenWrt-Devel] [PATCH] comgt-ncm: Add possibility to
> choose PDP context type
> From: sami at olmari.fi
> To: malaakso at elisanet.fi
> CC: openwrt-devel at lists.openwrt.org
>
> This is not working with Huawei E3276, only "option pdptype 'IP' works,
> IPV6 and IPV4V6... I do not have IPv6 offered from ISP currently,
> should it matter. At attachment there is clips from the log using each
> option type, most important clip here, same for IPV4V6 (aka no option
> set):
>
> Sun Sep 20 20:32:10 2015 daemon.notice netifd: wan (2935): sending ->
> AT+CGDCONT=1,"IPV6","opengate"
> Sun Sep 20 20:32:11 2015 daemon.notice netifd: wan (2935): Error
> running AT-command
> Sun Sep 20 20:32:11 2015 daemon.notice netifd: wan (2935): Failed to
> initialize modem
>
> There is also some random other errors seen on log on _working_
> connection, I don't know do they bear any importance, as system works.
> Anything I could do to make it work so that it wouldn't at least fail?
>
> Sami Olmari
>
> P.S. I've updated wiki with this new option information :)
>
Hi,
If you don't have IPv6 from your ISP, then that is expected. That doesn't change
the fact that my patch does introduce a regression for those without IPv6, them
having to manually disable it (setting ipv6 to 0 selects "IP" by default). I'll have to
think the defaults through again, most likely changing PDP type "IP" to be the
default unless IPv6 is explicitely _enabled_.
Thanks for reporting!
Matti
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list