[OpenWrt-Devel] OpenWrt /etc/hotplug.d/button/00-wps

[John kerry]

Hi,

I have tried script:









*["$ACTION" = "pressed" -a "$BUTTON" = "BUT_2"] && {   ["${ACTION}" =
"ifup" -a "${INTERFACE}" = "wan"] && {        echo "" > /dev/console
echo "SWITCH TO RJ45" > /dev/console        echo "255" >
/sys/devices/platform/leds-gpio/leds/db120:green:status/brightness
    } &  }*



*but still no luck :(*
Could anyone please figure out what mistakes i am doing.

Regards,
John

On Wed, Sep 16, 2015 at 9:12 AM, John kerry <kerry9842 at gmail.com> wrote:

> Hi,
>
> I have changed the script as below:
>
> MYDEV='eth0.2'
>
>  ["$ACTION" = "pressed" -a "$BUTTON" = "BUT_2" -a "INTERFACE" = 'wan'] &&
>    {
>         devstatus "$MYDEV" | grep '"up": true' &&
>        {
>             echo "255" >
> /sys/devices/platform/leds-gpio/leds/db120:green:status/brightness
>         }
>     }
>
>
> but its not working.
>
> What mistake i am doing.
>
> Could you please correct it me.
>
> Regards,
> John
>
> On Tue, Sep 15, 2015 at 7:51 PM, Bastian Bittorf <bittorf at bluebottle.com>
> wrote:
>
>> * John kerry <kerry9842 at gmail.com> [15.09.2015 13:44]:
>> > Hi,
>> >
>> > I have added following condition but its not working:
>> >
>> > MYDEV='eth0'
>> >
>> > if [ "$ACTION" = "pressed" -a "$BUTTON" = "BUT_2" ] && {
>>  ^^^^ remove the 'if'
>> >   devstatus "$MYDEV" | grep '"up": true' && {
>> >     echo "255" >
>> > /sys/devices/platform/leds-gpio/leds/db120:green:status/brightness
>> >   }
>> > }
>> >
>> > fi
>>  ^^^^ remove the 'fi'
>>
>> please change the first line to e.g.
>> [ "$ACTION" = "pressed" -a "$BUTTON" = "BUT_2" -a "$INTERFACE" = 'wan' ]
>> && {
>>
>> INTERFACE is the 'name' of the device, e.g. 'wan' or 'lan'
>> DEVICE is the real thing, e.g. eth0.1
>>
>> > Am i doing any mistake or need to change anything
>>
>> you can always TEST you script with e.g.
>>
>> set -x
>> INTERFACE=bla
>> DEVICE=blubb
>> . name_of_your_script
>> set +x
>>
>> bye, bastian
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150916/6066bcd1/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel