[OpenWrt-Devel] x86-64: /proc is not being mounted
John Crispin
blogic at openwrt.org
Sun Sep 13 09:48:18 EDT 2015
good decision let us know if you run into issues. one change at a time
is always best in these cases and tend to cost less time to get the
final result.
On 13/09/2015 15:14, Carlos Ferreira wrote:
> It seems that I'm unable to understand what really happened.
> I decided to start all over again, and instead of adding a lot of
> features to the kernel and test them, I decided to start with a default
> kernel and add features one by one, testing them along the way.
> Since the Chaos Calmer is now out, I will use it instead of using the trunk.
>
>
>
> On 11 September 2015 at 11:02, Carlos Ferreira <carlosmf.pt at gmail.com
> <mailto:carlosmf.pt at gmail.com>> wrote:
>
> I didn't. I copied the config value so that who read the mail, could
> understand imediatly what I was talking about.
>
> I'm unable to see if the default config works, because after
> booting, I'm unable to use the USB keyboard. I solved it by adding
> usb-pci support and a bunch of keyboard optionn. I was unsure which
> one exactly should be activated, so everything that was related with
> USB + Keyboard, I activated.
>
> The hardware target to where I'm building OpenWRT is a Supermicro
> A1SAi-2750F server board
> <http://www.supermicro.com/products/motherboard/Atom/X10/A1SAi-2750F.cfm>.
>
> I will send in annex, the configuration files.
>
>
>
>
> On 11 September 2015 at 06:54, John Crispin <blogic at openwrt.org
> <mailto:blogic at openwrt.org>> wrote:
>
>
>
> On 11/09/2015 01:53, Carlos Ferreira wrote:
> > I have a custom build for x86_64 where CONFIG_PROC_FS is active (y) at
> > the kernel configuration. /etc/fstabs has nothing and is pointing into
> > an empty /tmp directory.
> >
> > Is there any reason that might prevent the /proc from being mounted?
> > After booting for the first time, /proc is not mounted and because of
> > that, I'm unable to use 'top' or 'ps' to list the active processes.
> >
> > I have been banging my head into the wall for the last day, unable to
> > understand what is going on.
>
>
> procfs is enabled by default. i am not sure why you had to
> enable it by
> hand. does the default configuration work for you ? what other
> changes
> did you make to your tree ?
>
> John
>
>
> >
> > Has anyone had the same issue before?
> > --
> >
> > Carlos Miguel Ferreira
> > Researcher at Telecommunications Institute
> > Aveiro - Portugal
> > Work E-mail - cmf at av.it.pt <mailto:cmf at av.it.pt>
> <mailto:cmf at av.it.pt <mailto:cmf at av.it.pt>>
> > Skype & GTalk -> carlosmf.pt <http://carlosmf.pt>
> <http://carlosmf.pt>@gmail.com <http://gmail.com>
> > <http://gmail.com>
> > LinkedIn -> http://www.linkedin.com/in/carlosmferreira
> >
> >
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel at lists.openwrt.org
> <mailto:openwrt-devel at lists.openwrt.org>
> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> >
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> <mailto:openwrt-devel at lists.openwrt.org>
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
>
>
>
> --
>
> Carlos Miguel Ferreira
> Researcher at Telecommunications Institute
> Aveiro - Portugal
> Work E-mail - cmf at av.it.pt <mailto:cmf at av.it.pt>
> Skype & GTalk -> carlosmf.pt <http://carlosmf.pt>@gmail.com
> <http://gmail.com>
> LinkedIn -> http://www.linkedin.com/in/carlosmferreira
>
>
>
>
> --
>
> Carlos Miguel Ferreira
> Researcher at Telecommunications Institute
> Aveiro - Portugal
> Work E-mail - cmf at av.it.pt <mailto:cmf at av.it.pt>
> Skype & GTalk -> carlosmf.pt <http://carlosmf.pt>@gmail.com
> <http://gmail.com>
> LinkedIn -> http://www.linkedin.com/in/carlosmferreira
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list