[OpenWrt-Devel] AR9344 OpenWrt GUI

[John kerry]

Hi,

Yes after reset we are to able to reconnect, I understand using wired
connection we can configure but we need to configure using wireless only.
Is there anyway that we can avoid the Wi-Fi reset?

Regards,

On Thu, Sep 10, 2015 at 7:29 AM, David Lang <david at lang.hm> wrote:

> On Wed, 9 Sep 2015, John kerry wrote:
>
> Hi,
>>
>> We are working on AR9344 OpenWrt,
>>
>> We have configured the wireless as AP mode and broadcasting the SSID so
>> any
>> device can connect to it and even we are able access the GUI on Smartphone
>> after connecting to that AP.
>>
>> Then we do survey the scanning devices, its gives the Scanning result,
>> then
>> we can join Network  to anyone from the list. Then blow page will show as
>> shown below:
>>
>>
>> [image: Inline image 1]
>>
>>
>> The we enter the PassPhrase and Click on Submit button. Then next page
>> will
>> show as below
>> [image: Inline image 2]
>>
>> After Clicking the on *Save & Apply button, *The following files
>> /etc/config/network
>>
>> /etc/config/dhcp, /etc/config/qos etc.
>>
>> Because of this files changes Wi-Fi connection is reset the connection. So
>> we are unable to configure above configuration using Smartphone.
>>
>
> Well, when you reconfigure the interface you are connected to, it is going
> to bounce. Which is why it's suggested that you configure the wireless
> through a wired link.
>
> But once the wifi is reset, you should be able to reconnect, login again
> and continue. Is this not working? If not, what is happening?
>
> David Lang
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150910/5e9a76f6/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel