[OpenWrt-Devel] [PATCH][RESEND][v2] CC: ar71xx: add support for D-LINK DIR-615 rev. Ix board
Jaehoon You
teslamint at gmail.com
Thu Sep 3 11:44:51 EDT 2015
backport of r46248.
Signed-off-by: Jaehoon You <teslamint at gmail.com>
rebased on r46767.
---
target/linux/ar71xx/base-files/etc/diag.sh | 1 +
.../ar71xx/base-files/etc/uci-defaults/01_leds | 8 ++
.../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../base-files/lib/preinit/05_set_iface_mac_ar71xx | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-3.18 | 1 +
.../ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c | 133 +++++++++++++++++++++
target/linux/ar71xx/generic/profiles/d-link.mk | 10 ++
target/linux/ar71xx/image/Makefile | 9 ++
.../610-MIPS-ath79-openwrt-machines.patch | 25 +++-
11 files changed, 189 insertions(+), 6 deletions(-)
mode change 100644 => 100755 target/linux/ar71xx/base-files/etc/uci-defaults/02_network
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index ece7098..987e369 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -61,6 +61,7 @@ get_status_led() {
dir-505-a1 |\
dir-600-a1 |\
dir-615-e1 |\
+ dir-615-i1 |\
dir-615-e4)
status_led="d-link:green:power"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index d628f1a..88e966d 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -155,6 +155,14 @@ dir-825-b1)
ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
;;
+dir-615-i1)
+ ucidef_set_led_default "power" "POWER" "d-link:green:power" "1"
+ ucidef_set_led_default "diag" "DIAG" "d-link:amber:power" "0"
+ ucidef_set_led_default "wps" "WPS" "d-link:blue:wps" "0"
+ ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt"
+ ;;
+
dir-825-c1)
ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
old mode 100644
new mode 100755
index 7e26886..7b0d63a
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -221,6 +221,7 @@ tl-wr941nd)
r6100 |\
smart-300 |\
+dir-615-i1 |\
tl-mr3420-v2 |\
tl-wr841n-v8 |\
tl-wr842n-v2 |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index cacf362..ed89cfb 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -408,6 +408,9 @@ ar71xx_board_detect() {
*"DIR-615 rev. E4")
name="dir-615-e4"
;;
+ *"DIR-615 rev. I1")
+ name="dir-615-i1"
+ ;;
*"DIR-825 rev. B1")
name="dir-825-b1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
index b40dff5..c39169a 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
@@ -29,6 +29,9 @@ preinit_set_mac_address() {
fetch_mac_from_mtd config lan_mac wan_mac
echo 1 > /sys/class/leds/dir-615-c1:green:wancpu/brightness
;;
+ dir-615-i1)
+ fetch_mac_from_mtd nvram sys_lan_mac sys_wan_mac
+ ;;
r6100)
mac_lan=$(mtd_get_mac_binary caldata 0)
[ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index e5376ef..aa05d6f 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -205,6 +205,7 @@ platform_check_image() {
dir-615-c1 | \
dir-615-e1 | \
dir-615-e4 | \
+ dir-615-i1 | \
dir-825-c1 | \
dir-835-a1 | \
dlan-pro-500-wp | \
diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
index d661aa7..14d99c6 100644
--- a/target/linux/ar71xx/config-3.18
+++ b/target/linux/ar71xx/config-3.18
@@ -53,6 +53,7 @@ CONFIG_ATH79_MACH_DHP_1565_A1=y
CONFIG_ATH79_MACH_DIR_505_A1=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
+CONFIG_ATH79_MACH_DIR_615_I1=y
CONFIG_ATH79_MACH_DIR_825_B1=y
CONFIG_ATH79_MACH_DIR_825_C1=y
CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
new file mode 100644
index 0000000..64fe438
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
@@ -0,0 +1,133 @@
+/*
+ * D-Link DIR-615 rev. I1 board support
+ * Copyright (C) 2013-2015 Jaehoon You <teslamint at gmail.com>
+ *
+ * based on the DIR-600 rev. A1 board support code
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2012 Vadim Girlin <vadimgirlin at gmail.com>
+ *
+ * based on the TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support code
+ * Copyright (C) 2012 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DIR_615_I1_GPIO_LED_WPS 15
+#define DIR_615_I1_GPIO_LED_POWER_AMBER 14
+#define DIR_615_I1_GPIO_LED_POWER_GREEN 4
+#define DIR_615_I1_GPIO_LED_WAN_AMBER 22
+#define DIR_615_I1_GPIO_LED_WAN_GREEN 12
+#define DIR_615_I1_GPIO_LED_WLAN_GREEN 13
+
+#define DIR_615_I1_GPIO_BTN_WPS 16
+#define DIR_615_I1_GPIO_BTN_RESET 17
+
+#define DIR_615_I1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR_615_I1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_I1_KEYS_POLL_INTERVAL)
+
+#define DIR_615_I1_LAN_PHYMASK BIT(0)
+#define DIR_615_I1_WAN_PHYMASK BIT(4)
+#define DIR_615_I1_WLAN_MAC_ADDR 0x1fffffb4
+
+static struct gpio_led dir_615_i1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:green:power",
+ .gpio = DIR_615_I1_GPIO_LED_POWER_GREEN,
+ }, {
+ .name = "d-link:amber:power",
+ .gpio = DIR_615_I1_GPIO_LED_POWER_AMBER,
+ }, {
+ .name = "d-link:amber:wan",
+ .gpio = DIR_615_I1_GPIO_LED_WAN_AMBER,
+ }, {
+ .name = "d-link:green:wan",
+ .gpio = DIR_615_I1_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wlan",
+ .gpio = DIR_615_I1_GPIO_LED_WLAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR_615_I1_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir_615_i1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615_I1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615_I1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_615_i1_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[ETH_ALEN];
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, ~(DIR_615_I1_WAN_PHYMASK));
+
+ ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615_I1_WLAN_MAC_ADDR), mac);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+
+ /* GMAC0 is connected to the PHY0 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = DIR_615_I1_WAN_PHYMASK;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_mask = DIR_615_I1_LAN_PHYMASK;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ /* Disable JTAG, enabling GPIOs 0-3 */
+ /* Configure OBS4 line, for GPIO 4*/
+ ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
+ AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_i1_leds_gpio),
+ dir_615_i1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR_615_I1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_615_i1_gpio_keys),
+ dir_615_i1_gpio_keys);
+
+ ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_I1, "DIR-615-I1", "D-Link DIR-615 rev. I1",
+ dir_615_i1_setup);
diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk
index 0909df5..f782a41 100644
--- a/target/linux/ar71xx/generic/profiles/d-link.mk
+++ b/target/linux/ar71xx/generic/profiles/d-link.mk
@@ -93,6 +93,16 @@ endef
$(eval $(call Profile,DIR615E4))
+define Profile/DIR615IX
+ NAME:=D-Link DIR-615 rev. I1
+ PACKAGES:=
+endef
+
+define Profile/DIR615IX/Description
+ Package set optimized for the D-Link DIR-615 rev. I1.
+endef
+
+$(eval $(call Profile,DIR615IX))
define Profile/DIR825B1
NAME:=D-Link DIR-825 rev. B1
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index bb5de17..8b7b91f 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -944,6 +944,7 @@ cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware)
cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k at 0x80000(firmware)
+cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k at 0xa0000(firmware)
@@ -1128,6 +1129,10 @@ Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtd
Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
+Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
+Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
+Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
+
Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
@@ -1876,6 +1881,9 @@ $(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,1
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
+$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
+$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
+
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
@@ -2020,6 +2028,7 @@ $(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,tt
$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
$(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
+$(eval $(call MultiProfile,DIR615IX,DIR615I1 DIR615I3))
$(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
$(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
$(eval $(call MultiProfile,OPENMESH,OM2P OM5P MR600 MR900))
diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
index 941cb49..8f46d1a 100644
--- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,195 @@
+@@ -16,22 +16,196 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -35,6 +35,7 @@
+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
+ ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */
+ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
++ ATH79_MACH_DIR_615_I1, /* D-Link DIR-615 rev. I1 */
+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
+ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */
@@ -269,7 +270,7 @@
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -11,62 +75,1030 @@ config ATH79_MACH_AP121
+@@ -11,62 +75,1041 @@ config ATH79_MACH_AP121
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
@@ -585,6 +586,17 @@
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+++config ATH79_MACH_DIR_615_I1
++ bool "D-Link DIR-615 rev. I1 support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++ select ATH79_NVRAM
++
+config ATH79_MACH_DIR_825_B1
+ bool "D-Link DIR-825 rev. B1 board support"
+ select SOC_AR71XX
@@ -1328,7 +1340,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1115,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1126,97 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@@ -1426,7 +1438,7 @@
endmenu
config SOC_AR71XX
-@@ -124,7 +1247,10 @@ config ATH79_DEV_DSA
+@@ -124,7 +1258,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@@ -1438,7 +1450,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -154,6 +1280,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -154,6 +1291,11 @@ config ATH79_PCI_ATH9K_FIXUP
def_bool n
config ATH79_ROUTERBOOT
@@ -1452,7 +1464,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,124 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,125 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@@ -1480,6 +1492,7 @@
+obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
+obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
--
2.2.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list