[OpenWrt-Devel] [PATCH v2] brcm63xx: Add NuCom R5010UNv2 support
dani
dgcbueu at gmail.com
Mon Nov 30 16:50:19 EST 2015
This patch adds support for the NuCom R5010UNv2.
It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this
wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used
for the profile of the router.
It's worth mentioning this board was affected by a bug solved with
https://dev.openwrt.org/changeset/46707
Tested-by: Angel Fontan <angel.fontan at gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu at gmail.com>
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
index 7826fad..c0fb31e 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -102,6 +102,9 @@ set_state() {
p870hw-51a_v2)
status_led="P870HW-51a:green:power"
;;
+ r5010un_v2)
+ status_led="96328ang:green:power"
+ ;;
rta770bw)
status_led="RTA770BW:green:diag"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
index bdb3dad..34d5c51 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
@@ -46,6 +46,9 @@ homehub2a)
ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1"
ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1"
;;
+r5010un_v2)
+ ucidef_set_led_usbdev "usb" "USB" "96328ang:green:usb" "1-1"
+ ;;
esac
ucidef_commit_leds
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 129514b..70f18cb 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -94,6 +94,7 @@ fast2504n |\
fast2704v2 |\
hg655b |\
p870hw-51a_v2 |\
+r5010un_v2 |\
vr-3025un |\
vr-3025u |\
vr-3026e)
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
index f307a4c..bc9ae21 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
@@ -23,6 +23,7 @@ case "$(brcm63xx_board_name)" in
dsl-274xb-f |\
magic |\
p870hw-51a_v2 |\
+ r5010un_v2 |\
rta770bw |\
rta770w |\
spw303v |\
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 1a97c86..7dc57fd 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -180,6 +180,9 @@ brcm63xx_dt_detect() {
"Netgear DGND3700v1/DGND3800B")
board_name="dgnd3700v1_dgnd3800b"
;;
+ "NuCom R5010UN v2")
+ board_name="r5010un_v2"
+ ;;
"Pirelli A226G")
board_name="a226g"
;;
diff --git a/target/linux/brcm63xx/dts/r5010unv2.dts b/target/linux/brcm63xx/dts/r5010unv2.dts
new file mode 100644
index 0000000..8c83483
--- /dev/null
+++ b/target/linux/brcm63xx/dts/r5010unv2.dts
@@ -0,0 +1,64 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "NuCom R5010UN v2";
+ compatible = "nucom,r5010unv2", "brcm,bcm6328";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ debounce-interval = <60>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 23 1>;
+ linux,code = <KEY_RESTART>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio0 24 1>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ inet_green {
+ label = "96328ang:green:inet";
+ gpios = <&gpio0 1 1>;
+ };
+ inet_fail_red {
+ label = "96328ang:red:inet-fail";
+ gpios = <&gpio0 2 1>;
+ };
+ dsl_red {
+ label = "96328ang:green:dsl";
+ gpios = <&gpio0 3 1>;
+ };
+ power_green {
+ label = "96328ang:green:power";
+ gpios = <&gpio0 4 1>;
+ default-state = "on";
+ };
+ power_fail_red {
+ label = "96328ang:red:power-fail";
+ gpios = <&gpio0 5 1>;
+ };
+ wps_green {
+ label = "96328ang:green:wps";
+ gpios = <&gpio0 10 1>;
+ };
+ usb_green {
+ label = "96328ang:green:usb";
+ gpios = <&gpio0 11 1>;
+ };
+ };
+};
+
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index 9581116..06b9000 100644
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -590,6 +590,8 @@ $(eval $(call bcm63xxCfeRamdisk,DG834GV4,DG834GTv4,dg834g_v4,96348W3,6348))
$(eval $(call bcm63xxCfeNetgear,DGND3700v1_3800B,DGND3700v1,dgnd3700v1,96368MVWG,6368,--image-offset 0x20000 --block-size 0x20000,U12L144T01_NETGEAR_NEWLED,1))
# Netgear DGND3800B
$(eval $(call bcm63xxCfeNetgear,DGND3700v1_3800B,DGND3800B,dgnd3700v1,96368MVWG,6368,--image-offset 0x20000 --block-size 0x20000,U12L144T11_NETGEAR_NEWLED,1))
+# NuCom R5010UNv2
+$(eval $(call bcm63xxCfe,R5010UNV2,R5010UNv2,r5010unv2,96328ang,6328,--pad 8))
# Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
$(eval $(call bcm63xxCfe,AGPF_S0,AGV2+W,agpf-s0,AGPF-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8))
# Pirelli A226G
diff --git a/target/linux/brcm63xx/patches-4.1/573-board_R5010UNv2.patch b/target/linux/brcm63xx/patches-4.1/573-board_R5010UNv2.patch
new file mode 100644
index 0000000..cf5a719
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.1/573-board_R5010UNv2.patch
@@ -0,0 +1,70 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -641,6 +641,51 @@
+ },
+ },
+ };
++
++static struct board_info __initdata board_R5010UNV2 = {
++ .name = "96328ang",
++ .expected_cpu_id = 0x6328,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .use_fallback_sprom = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++ .num_usbh_ports = 1,
++ .has_enetsw = 1,
++
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++ },
++ },
++
++ .fallback_sprom = {
++ .type = SPROM_BCM43217,
++ .pci_bus = 1,
++ .pci_dev = 0,
++ },
++};
++
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+
+ /*
+@@ -2452,6 +2497,7 @@
+ &board_A4001N1,
+ &board_dsl_274xb_f1,
+ &board_FAST2704V2,
++ &board_R5010UNV2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ &board_96338gw,
+@@ -2550,6 +2596,7 @@
+ { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, },
+ { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+ { .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
++ { .compatible = "nucom,r5010unv2", .data = &board_R5010UNV2, },
+ { .compatible = "sagem,f at st2704v2", .data = &board_FAST2704V2, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/profiles/nucom.mk b/target/linux/brcm63xx/profiles/nucom.mk
new file mode 100644
index 0000000..2cd8801
--- /dev/null
+++ b/target/linux/brcm63xx/profiles/nucom.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/R5010UNV2
+ NAME:=NuCom R5010UN v2
+ PACKAGES:=kmod-b43 wpad-mini \
+ kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev
+endef
+define Profile/R5010UNV2/Description
+ Package set optimized for R5010UNV2.
+endef
+$(eval $(call Profile,R5010UNV2))
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list