[OpenWrt-Devel] [PATCH] CC: brcm2708: Add sysupgrade support for Raspberry Pi

Bruno Randolf br1 at einfach.org
Fri Nov 13 11:17:45 EST 2015


Also create .gz images if configured to do so.

This is equivalent, but different to what we have in trunk, as the image
creation has been rewritten there.

Signed-off-by: Bruno Randolf <br1 at einfach.org>
---
 .../brcm2708/base-files/lib/preinit/79_move_config     | 18 ++++++++++++++++++
 .../linux/brcm2708/base-files/lib/upgrade/platform.sh  | 17 +++++++++++++++++
 target/linux/brcm2708/image/Makefile                   |  3 +++
 3 files changed, 38 insertions(+)
 create mode 100644 target/linux/brcm2708/base-files/lib/preinit/79_move_config
 create mode 100644 target/linux/brcm2708/base-files/lib/upgrade/platform.sh

diff --git a/target/linux/brcm2708/base-files/lib/preinit/79_move_config b/target/linux/brcm2708/base-files/lib/preinit/79_move_config
new file mode 100644
index 0000000..7bcea7b
--- /dev/null
+++ b/target/linux/brcm2708/base-files/lib/preinit/79_move_config
@@ -0,0 +1,18 @@
+#!/bin/sh
+# Copyright (C) 2015 OpenWrt.org
+
+BOOTPART=/dev/mmcblk0p1
+
+move_config() {
+	if [ -b $BOOTPART ]; then
+		insmod nls_cp437
+		insmod nls_iso8859-1
+		insmod fat
+		insmod vfat
+		mount -t vfat -o rw,noatime $BOOTPART /mnt
+		[ -f /mnt/sysupgrade.tgz ] && mv -f /mnt/sysupgrade.tgz /
+		umount /mnt
+	fi
+}
+
+boot_hook_add preinit_mount_root move_config
diff --git a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000..3e1ee00
--- /dev/null
+++ b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,17 @@
+platform_check_image() {
+	# i know no way to verify the image
+	return 0;
+}
+
+platform_do_upgrade() {
+	sync
+	get_image "$1" | dd of=/dev/mmcblk0 bs=2M conv=fsync
+	sleep 1
+}
+
+platform_copy_config() {
+	mount -t vfat -o rw,noatime /dev/mmcblk0p1 /mnt
+	cp -af "$CONF_TAR" /mnt/
+	sync
+	umount /mnt
+}
diff --git a/target/linux/brcm2708/image/Makefile b/target/linux/brcm2708/image/Makefile
index e70bdd0..633ed88 100644
--- a/target/linux/brcm2708/image/Makefile
+++ b/target/linux/brcm2708/image/Makefile
@@ -28,6 +28,9 @@ define Image/Build/RaspberryPi
 	mcopy -i $(KDIR)/boot.img $(KDIR)/Image ::kernel.img  # Copy OpenWrt built kernel
 	./gen_rpi_sdcard_img.sh $(BIN_DIR)/$(IMG_PREFIX)-sdcard-vfat-$(1).img $(KDIR)/boot.img $(KDIR)/root.$(1) \
 		$(CONFIG_BRCM2708_SD_BOOT_PARTSIZE) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
+  ifneq ($(CONFIG_TARGET_IMAGES_GZIP),)
+	gzip -9n -c $(BIN_DIR)/$(IMG_PREFIX)-sdcard-vfat-$(1).img > $(BIN_DIR)/$(IMG_PREFIX)-sdcard-vfat-$(1).img.gz
+  endif
 endef
 
 define Image/Build
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list