[OpenWrt-Devel] [PATCH] ar71xx: Add Support for the Bitmain Antminer S1
L. D. Pinney
ldpinney at gmail.com
Sun May 24 16:41:27 EDT 2015
This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner
http://wiki.openwrt.org/toh/bitmain/s1
Signed-off-by: L. D. Pinney <ldpinney at gmail.com>
Acked-by: James Hilliard <james.hilliard1 at gmail.com>
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 ++
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds | 5 ++++
target/linux/ar71xx/base-files/etc/uci-defaults/02_network | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 ++
target/linux/ar71xx/config-3.18 | 1 +
target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c | 98 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
target/linux/ar71xx/generic/profiles/antminer.mk | 17 +++++++++++
target/linux/ar71xx/image/Makefile | 10 ++++++-
target/linux/ar71xx/patches-3.18/904-MIPS-ath79-bitmain-antminer-s1-support.patch | 39 ++++++++++++++++++++++++
tools/firmware-utils/src/mktplinkfw.c | 6 ++++
10 files changed, 182 insertions(+), 1 deletion(-)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 0553251..f6e4a87 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -12,6 +12,9 @@ get_status_led() {
all0305)
status_led="eap7660d:green:ds4"
;;
+ antminer-s1)
+ status_led="bitmain:green:system"
+ ;;
ap132)
status_led="ap132:green:status"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 41eeeeb..19814f4 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -31,6 +31,11 @@ all0315n)
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0315n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
;;
+antminer-s1)
+ ucidef_set_led_default "sys" "SYS" "bitmain:green:sys" "0"
+ ucidef_set_led_wlan "wlan" "WLAN" "bitmain:green:wlan" "phy0tpt"
+ ;;
+
ap113)
ucidef_set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index f5c6865..9fdaca0 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -343,6 +343,7 @@ wp543)
ucidef_set_interface_lan "eth0"
;;
+antminer-s1 |\
dir-505-a1)
ucidef_set_interface_lan "eth1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index d5dd561..06c6e53 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -107,6 +107,9 @@ tplink_board_detect() {
"015300"*)
model="EasyLink EL-MINI"
;;
+ "04440001"*)
+ model="BITMAIN ANTMINER S1"
+ ;;
"120000"*)
model="MERCURY MAC1200R"
;;
diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
index 543b77e..1960060 100644
--- a/target/linux/ar71xx/config-3.18
+++ b/target/linux/ar71xx/config-3.18
@@ -40,6 +40,7 @@ CONFIG_ATH79_MACH_AP83=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_AW_NR580=y
+CONFIG_ATH79_MACH_ANTMINER_S1=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c
new file mode 100644
index 0000000..27ed760
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c
@@ -0,0 +1,98 @@
+/*
+ * Bitmain Antminer S1 board support
+ *
+ * Copyright (C) 2015 L. D. Pinney <ldpinney at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "dev-usb.h"
+
+#define ANTMINER_S1_GPIO_BTN_RESET 11
+
+#define ANTMINER_S1_GPIO_LED_SYSTEM 23
+#define ANTMINER_S1_GPIO_LED_WLAN 0
+#define ANTMINER_S1_GPIO_USB_POWER 8
+
+#define ANTMINER_S1_KEYSPOLL_INTERVAL 20 /* msecs */
+#define ANTMINER_S1_KEYSDEBOUNCE_INTERVAL (3 * ANTMINER_S1_KEYSPOLL_INTERVAL)
+
+static const char *ANTMINER_S1_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data ANTMINER_S1_flash_data = {
+ .part_probes = ANTMINER_S1_part_probes,
+};
+
+static struct gpio_led ANTMINER_S1_leds_gpio[] __initdata = {
+ {
+ .name = "bitmain:green:system",
+ .gpio = ANTMINER_S1_GPIO_LED_SYSTEM,
+ .active_low = 0,
+ },{
+ .name = "bitmain:green:wlan",
+ .gpio = ANTMINER_S1_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button ANTMINER_S1_GPIO_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ANTMINER_S1_KEYSDEBOUNCE_INTERVAL,
+ .gpio = ANTMINER_S1_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+};
+
+static void __init antminer_s1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTMINER_S1_leds_gpio),
+ ANTMINER_S1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ANTMINER_S1_KEYSPOLL_INTERVAL,
+ ARRAY_SIZE(ANTMINER_S1_GPIO_keys),
+ ANTMINER_S1_GPIO_keys);
+
+ gpio_request_one(ANTMINER_S1_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ ath79_register_usb();
+
+ ath79_register_m25p80(&ANTMINER_S1_flash_data);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_ANTMINER_S1, "ANTMINER-S1",
+ "Bitmain Antminer S1", antminer_s1_setup);
diff --git a/target/linux/ar71xx/generic/profiles/antminer.mk b/target/linux/ar71xx/generic/profiles/antminer.mk
new file mode 100644
index 0000000..366982c
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/antminer.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/ANTMINER_S1
+ NAME:=Antminer S1
+ PACKAGES:=kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
+endef
+
+
+define Profile/ANTMINER_S1/Description
+ Package set optimized for the Bitmain Antminer S1.
+endef
+$(eval $(call Profile,ANTMINER_S1))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 38d01c8..4cff5d3 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -279,6 +279,14 @@ define Device/archer-c7-v2
endef
TARGET_DEVICES += archer-c5 archer-c7-v1 archer-c7-v2
+define Device/antminer-s1
+ $(Device/tplink-8mlzma)
+ BOARDNAME := ANTMINER-S1
+ DEVICE_PROFILE := ANTMINER_S1
+ TPLINK_HWID := 0x04440001
+ CONSOLE := ttyATH0,115200
+endef
+
define Device/el-m150
$(Device/tplink-8mlzma)
BOARDNAME := EL-M150
@@ -294,7 +302,7 @@ define Device/el-mini
TPLINK_HWID := 0x01530001
CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += el-m150 el-mini
+TARGET_DEVICES += antminer-s1 el-m150 el-mini
define Device/gl-inet-6408A-v1
$(Device/tplink-8mlzma)
diff --git a/target/linux/ar71xx/patches-3.18/904-MIPS-ath79-bitmain-antminer-s1-support.patch b/target/linux/ar71xx/patches-3.18/904-MIPS-ath79-bitmain-antminer-s1-support.patch
new file mode 100644
index 0000000..dfecc82
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/904-MIPS-ath79-bitmain-antminer-s1-support.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -21,6 +21,7 @@
+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */
+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
++ ATH79_MACH_ANTMINER_S1, /* Bitmain Antminer S1 */
+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -56,6 +56,16 @@
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
++config ATH79_MACH_ANTMINER_S1
++ bool "Bitmain Antminer S1 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_AP113
+ bool "Atheros AP113 board support"
+ select SOC_AR724X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -42,6 +42,7 @@
+ obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
+ obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
+ obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
++obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
+ obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+ obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
diff --git a/tools/firmware-utils/src/mktplinkfw.c b/tools/firmware-utils/src/mktplinkfw.c
index 80db8f8..87340db 100644
--- a/tools/firmware-utils/src/mktplinkfw.c
+++ b/tools/firmware-utils/src/mktplinkfw.c
@@ -30,6 +30,7 @@
#define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
#define HEADER_VERSION_V1 0x01000000
+#define HWID_ANTMINER_S1 0x04440001
#define HWID_GL_INET_V1 0x08000001
#define HWID_GS_OOLITE_V1 0x3C000101
#define HWID_TL_MR10U_V1 0x00100101
@@ -412,6 +413,11 @@ static struct board_info boards[] = {
.hw_rev = 1,
.layout_id = "16Mlzma",
}, {
+ .id = "ANTMINER-S1",
+ .hw_id = HWID_ANTMINER_S1,
+ .hw_rev = 1,
+ .layout_id = "8Mlzma",
+ }, {
/* terminating entry */
}
};
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list