[OpenWrt-Devel] lantiq DSL drivers / firmware info

Sylwester Petela sscapi at gmail.com
Sat May 23 08:39:02 EDT 2015



W dniu 2015-05-05 o 09:31, Johannes Berg pisze:
> On Tue, 2015-05-05 at 09:28 +0200, Sylwester Petela wrote:
>
>>>> [  458.772000] DSL[00]: WARNING - Data Path counters are not supported
>>>> for the FE!
>>> That seems pretty harmless - the driver code is really really ugly
>>> though. Probably should just remove the message.
>> Cannot find witch function this message is referring to, need to
>> investigate more.
> I found it in Martin's drv_dsl_cpe_api_vrx repository.
>
>>>> vectoring and ReTx works acording to friend but system log shows some
>>>> errors as well like on my ADSL line but not so many.
>>> What firmware/driver combination was this with?
>> xcpe_567517_562301.bin: VDSL over ISDN incl. vectoring support for
>> VRX200, version: 6.7.5 | ADSL Annex A for VRX200, version: 6.2.3
>>
>> 4.15.2 -app/control;  1.4.5 -mei
> Ok, I'll give that a try as soon as I've removed this from my productive
> env.
>
> Or perhaps I'll just put another image on a separate extroot since I
> have extroot setup anyway.
>
>> Yes slow but why ? Because of load or because of hardware, Zyxel on
>> stock openwrt driver can achieve 80Mbps without that much load.
> Not sure, perhaps the CPU is just slow?
>
> johannes
>

Anyone got a clue how to disable warnings ? Tried to disable PM counters 
but without any luck.

[   47.436000] DSL[00]: PM NE processing out of Poll Cycle!
[   47.636000] DSL[00]: Unsupported message with MsgID=0x0245!
[   47.640000] DSL[00]: Unsupported message with MsgID=0x1C44!
[   47.644000] DSL[00]: WARNING - Saving PM Channel Counters for FE are 
not supported!
[   47.652000] DSL[00]: WARNING - Saving PM Line Performance Counters 
for FE are not supported!
[   70.760000] DSL[00]: MEI_InternalXtmSwhowtimeEntrySignal(nFast=0, 
nIntl=928000)
[   70.768000] enter showtime, cell rate: 0 - 2188, 1 - 2188, xdata 
addr: 0x86d10000
[   70.784000] enter showtime, cell rate: 0 - 2188, 1 - 2188, xdata 
addr: 0x86d10000
[   70.792000] DSL[00]: WARNING - Data Path counters are not supported 
for the FE!
[   71.792000] DSL[00]: WARNING - FE line failures retrieving not 
supported by the FW in ADSL mode!
[   72.436000] pppoe-wan: renamed from ppp0
[   72.800000] DSL[00]: WARNING - FE line failures retrieving not 
supported by the FW in ADSL mode!
(...)
[  106.792000] DSL[00]: WARNING - Data Path counters are not supported 
for the FE!
[  107.064000] DSL[00]: WARNING - FE line failures retrieving not 
supported by the FW in ADSL mode!
[  108.072000] DSL[00]: WARNING - FE line failures retrieving not 
supported by the FW in ADSL mode!
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list