[OpenWrt-Devel] [PATCH] ralink: add support for ap699ge8c2

Cristian Morales Vega cristian at samknows.com
Wed May 13 05:49:36 EDT 2015


Signed-off-by: Cristian Morales Vega <cristian at samknows.com>
---
 .../linux/ramips/base-files/etc/board.d/02_network |   5 +
 target/linux/ramips/base-files/lib/ramips.sh       |   3 +
 .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ramips/dts/AP699GE8C2.dts             | 112 +++++++++++++++++++++
 target/linux/ramips/image/Makefile                 |   6 +-
 target/linux/ramips/mt7621/profiles/ap699ge8c2.mk  |  18 ++++
 6 files changed, 144 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/ramips/dts/AP699GE8C2.dts
 create mode 100644 target/linux/ramips/mt7621/profiles/ap699ge8c2.mk

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 24e1ba8..ee6aab0 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -116,6 +116,7 @@ ramips_setup_interfaces()
 		;;
 
 	3g-6200n | \
+	ap699ge8c2 | \
 	ai-br100 | \
 	dir-610-a1 | \
 	dir-300-b7 | \
@@ -268,6 +269,10 @@ ramips_setup_macs()
 	local wan_mac=""
 
 	case $board in
+	ap699ge8c2)
+		wan_mac=$(mtd_get_mac_binary factory 57350)
+		;;
+
 	br-6475nd)
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		wan_mac=$(mtd_get_mac_binary devdata 7)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 616f4a1..c1b7898 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -397,6 +397,9 @@ ramips_board_detect() {
 	*"Mediatek MT7628AN evaluation board")
 		name="mt7628"
 		;;
+	*"TWSZ AP699GE8C2")
+		name="ap699ge8c2"
+		;;
 	*)
 		name="generic"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 17b456b..b79cca8 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -25,6 +25,7 @@ platform_check_image() {
 	all0256n | \
 	all5002 | \
 	all5003 | \
+	ap699ge8c2 | \
 	ar725w | \
 	asl26555 | \
 	awapn2403 | \
diff --git a/target/linux/ramips/dts/AP699GE8C2.dts b/target/linux/ramips/dts/AP699GE8C2.dts
new file mode 100644
index 0000000..c7266bb
--- /dev/null
+++ b/target/linux/ramips/dts/AP699GE8C2.dts
@@ -0,0 +1,112 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+	model = "TWSZ AP699GE8C2";
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	palmbus at 1E000000 {
+		spi at b00 {
+			status = "okay";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l6405d";
+				reg = <0 0>;
+				linux,modalias = "m25p80";
+				spi-max-frequency = <10000000>;
+
+				partition at 0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+
+			};
+		};
+	};
+
+	pcie at 1e140000 {
+		status = "okay";
+
+		pcie0 {
+			mt76 at 0,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x8000>;
+				mediatek,2ghz = <0>;
+			};
+		};
+
+		pcie1 {
+			mt76 at 1,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x0000>;
+				mediatek,5ghz = <0>;
+			};
+		};
+	};
+
+	ethernet at 1e100000 {
+		mtd-mac-address = <&factory 0xe000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wps {
+			label = "twsz:green:wps";
+			gpios = <&gpio1 14 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		wps {
+			label = "wps";
+			gpios = <&gpio0 18 1>;
+			linux,code = <0x211>;
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+				ralink,function = "gpio";
+			};
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index e6b5112..b024c21 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -906,7 +906,7 @@ endif
 #
 
 ifeq ($(SUBTARGET),mt7621)
-  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt
+  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt ap699ge8c2
 endif
 
 define Device/mt7621
@@ -943,6 +943,10 @@ define Device/firewrt
   IMAGE_SIZE := $(ralink_default_fw_size_16M)
 endef
 
+define Device/ap699ge8c2
+  DTS := AP699GE8C2
+endef
+
 #
 # MT7628 Profiles
 #
diff --git a/target/linux/ramips/mt7621/profiles/ap699ge8c2.mk b/target/linux/ramips/mt7621/profiles/ap699ge8c2.mk
new file mode 100644
index 0000000..30df15b
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/ap699ge8c2.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/AP699GE8C2
+	NAME:=AP699GE8C2 Profile
+	PACKAGES:=\
+		kmod-usb-core kmod-usb3 \
+		kmod-ledtrig-usbdev kmod-mt76
+endef
+
+define Profile/AP699GE8C2/Description
+	Package set optimized for the TWSZ AP699GE8C2
+endef
+$(eval $(call Profile,AP699GE8C2))
-- 
2.1.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list