[OpenWrt-Devel] Archer VR200v GPL code

[Daniel Golle]

Hi!

Looks like the Firmware of the Archer VR200v is based on Linux.
http://www.tp-link.de/support/download/?model=Archer+VR200v&version=V1

binwalk Archer_VR200vv1_0.8.0_0.14_up_boot\(150331\)_2015-03-31_09.02.51.bin 

DECIMAL       HEXADECIMAL     DESCRIPTION
--------------------------------------------------------------------------------
20992         0x5200          uImage header, header size: 64 bytes, header CRC: 0x2E017C71, created: Tue Mar 31 02:52:56 2015, image size: 37472 bytes, Data Address: 0xA0400000, Entry Point: 0xA0400000, data CRC: 0x103D4E73, OS: Linux, CPU: MIPS, image type: Firmware Image, compression type: lzma, image name: "u-boot image"
21056         0x5240          LZMA compressed data, properties: 0x5D, dictionary size: 8388608 bytes, uncompressed size: 99532 bytes
66048         0x10200         uImage header, header size: 64 bytes, header CRC: 0xBEC297, created: Fri Oct 25 09:26:06 2013, image size: 41781 bytes, Data Address: 0x0, Entry Point: 0x0, data CRC: 0xBECBCEC2, OS: Linux, CPU: MIPS, image type: Multi-File Image, compression type: lzma, image name: "GPHY Firmware"
66120         0x10248         LZMA compressed data, properties: 0x5D, dictionary size: 8388608 bytes, uncompressed size: 131200 bytes
132096        0x20400         LZMA compressed data, properties: 0x5D, dictionary size: 8388608 bytes, uncompressed size: 3913720 bytes
1442304       0x160200        Squashfs filesystem, little endian, version 4.0, compression:lzma, size: 8816203 bytes,  643 inodes, blocksize: 131072 bytes, created: Tue Mar 31 03:01:11 2015


I cannot find the sourcecode on http://www.tp-link.de/support/gpl/

Please release GPL sourcecode allowing to reproducibly verify license compliance for the released binary firmware version 2015-03-31_09.02.51.


Thank you!


Best regards


Daniel Golle
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel