[OpenWrt-Devel] [PATCH 1/2] [packages] add support for Huawei NCM modems (openwrt-devel Digest, Vol 111, Issue 138)

Sun Mar 29 17:30:57 EDT 2015

On 28-03-2015 17:43, Cezary Jackiewicz wrote:
> Why you do that? ncm from gcom-ncm is enough, you do not have to do 
> specifically the new protocol. Just set /dev/cdc-wdm0 as device. Tested
> with E3131 in huawei/ncm mode.

Well, i saw that code, but found it to be quite slow and unreliable with
my modems. It blocked regularly, and the connection was not
reinitialized when it dropped. I should probably test it again with the
3.18 kernel and add code specific to the modems i own.

Maarten Deprez
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel