[OpenWrt-Devel] [PATCH] ralink: mt7621 add ECHI OCHI XCHI support

wengbj fl.service at t-firefly.com
Fri Mar 20 22:49:39 EDT 2015


From: zouxf <fl.service at t-firefly.com>

Signed-off-by: zouxf <fl.service at t-firefly.com>
---
 target/linux/ramips/mt7621/config-3.18             |    6 +
 .../0062-mt7621-add-ECHI-OCHI-XCHI-support.patch   | 5989 ++++++++++++++++++++
 2 files changed, 5995 insertions(+)
 create mode 100644 target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch

diff --git a/target/linux/ramips/mt7621/config-3.18 b/target/linux/ramips/mt7621/config-3.18
index 7dffcb5..11d372b 100644
--- a/target/linux/ramips/mt7621/config-3.18
+++ b/target/linux/ramips/mt7621/config-3.18
@@ -166,6 +166,7 @@ CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_SUPPLY=y
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_RALINK=y
+CONFIG_RALINK_USBPHY=y
 # CONFIG_RALINK_WDT is not set
 CONFIG_RCU_STALL_COMMON=y
 CONFIG_RESET_CONTROLLER=y
@@ -205,7 +206,12 @@ CONFIG_SYS_SUPPORTS_SCHED_SMT=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TREE_RCU=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_MT7621_XHCI_PLATFORM=y
+CONFIG_USB_PHY=y
 CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_XHCI_PLATFORM=y
 CONFIG_USE_OF=y
 CONFIG_WATCHDOG_CORE=y
 CONFIG_WEAK_ORDERING=y
diff --git a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
new file mode 100644
index 0000000..d9d61ff
--- /dev/null
+++ b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
@@ -0,0 +1,5989 @@
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -11,6 +11,8 @@ obj-$(CONFIG_USB_DWC2)		+= dwc2/
+ 
+ obj-$(CONFIG_USB_MON)		+= mon/
+ 
++obj-$(CONFIG_USB_PHY)		+= phy/
++
+ obj-$(CONFIG_PCI)		+= host/
+ obj-$(CONFIG_USB_EHCI_HCD)	+= host/
+ obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
+--- a/drivers/usb/core/hcd-pci.c
++++ b/drivers/usb/core/hcd-pci.c
+@@ -214,8 +214,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+ 		goto disable_pci;
+ 	}
+ 
++
++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++	hcd->amd_resume_bug = 0;
++#else
+ 	hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
+ 			driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
++#endif
+ 
+ 	if (driver->flags & HCD_MEMORY) {
+ 		/* EHCI, OHCI */
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -1286,7 +1286,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
+ 	if (type != HUB_SUSPEND) {
+ 		/* Disconnect all the children */
+ 		for (i = 0; i < hdev->maxchild; ++i) {
+-			if (hub->ports[i]->child)
++			if (hub->ports[i] && hub->ports[i]->child)
+ 				usb_disconnect(&hub->ports[i]->child);
+ 		}
+ 	}
+--- a/drivers/usb/core/port.c
++++ b/drivers/usb/core/port.c
+@@ -480,8 +480,10 @@ void usb_hub_remove_port_device(struct usb_hub *hub, int port1)
+ 	struct usb_port *port_dev = hub->ports[port1 - 1];
+ 	struct usb_port *peer;
+ 
+-	peer = port_dev->peer;
+-	if (peer)
+-		unlink_peers(port_dev, peer);
+-	device_unregister(&port_dev->dev);
++	if(port_dev) {
++		peer = port_dev->peer;
++		if (peer)
++			unlink_peers(port_dev, peer);
++		device_unregister(&port_dev->dev);
++	}
+ }
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -32,7 +32,12 @@ config USB_XHCI_PCI
+        default y
+ 
+ config USB_XHCI_PLATFORM
+-	tristate
++	tristate "xHCI platform"
++
++config USB_MT7621_XHCI_PLATFORM
++	bool "MTK MT7621 xHCI"
++	depends on USB_XHCI_PLATFORM
++	depends on SOC_MT7621
+ 
+ config USB_XHCI_MVEBU
+ 	tristate "xHCI support for Marvell Armada 375/38x"
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -16,7 +16,12 @@ xhci-hcd-y := xhci.o xhci-mem.o
+ xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
+ xhci-hcd-y += xhci-trace.o
+ 
++ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o
++endif
++
+ xhci-plat-hcd-y := xhci-plat.o
++
+ ifneq ($(CONFIG_USB_XHCI_MVEBU), )
+ 	xhci-plat-hcd-y		+= xhci-mvebu.o
+ endif
+@@ -26,9 +31,14 @@ endif
+ 
+ obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
+ 
++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
+ obj-$(CONFIG_PCI)		+= pci-quirks.o
++endif
+ 
++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
+ obj-$(CONFIG_USB_XHCI_PCI)	+= xhci-pci.o
++endif
++
+ obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
+ 
+ obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -33,6 +33,8 @@
+ #include <linux/usb.h>
+ #include <linux/usb/hcd.h>
+ #include <linux/usb/ehci_pdriver.h>
++#include <linux/usb/phy.h>
++#include <linux/usb/otg.h>
+ 
+ #include "ehci.h"
+ 
+@@ -255,6 +257,15 @@ static int ehci_platform_probe(struct platform_device *dev)
+ 	hcd->rsrc_start = res_mem->start;
+ 	hcd->rsrc_len = resource_size(res_mem);
+ 
++#ifdef CONFIG_USB_PHY
++	hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
++	if (!IS_ERR_OR_NULL(hcd->phy)) {
++		otg_set_host(hcd->phy->otg,
++				&hcd->self);
++		usb_phy_init(hcd->phy);
++	}
++#endif
++
+ 	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+ 	if (IS_ERR(hcd->regs)) {
+ 		err = PTR_ERR(hcd->regs);
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy-7621.c
+@@ -0,0 +1,445 @@
++#include "mtk-phy.h"
++
++#ifdef CONFIG_PROJECT_7621
++#include "mtk-phy-7621.h"
++
++//not used on SoC
++PHY_INT32 phy_init(struct u3phy_info *info){	
++	return PHY_TRUE;
++}
++
++//not used on SoC
++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){
++	return PHY_TRUE;
++}
++
++//--------------------------------------------------------
++//    Function : fgEyeScanHelper_CheckPtInRegion()
++// Description : Check if the test point is in a rectangle region.
++//               If it is in the rectangle, also check if this point
++//               is on the multiple of deltaX and deltaY.
++//   Parameter : strucScanRegion * prEye - the region
++//               BYTE bX
++//               BYTE bY
++//      Return : BYTE - TRUE :  This point needs to be tested
++//                      FALSE:  This point will be omitted
++//        Note : First check within the rectangle.
++//               Secondly, use modulous to check if the point will be tested.
++//--------------------------------------------------------
++static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY)
++{
++  PHY_INT8 fgValid = true;
++
++
++  /// Be careful, the axis origin is on the TOP-LEFT corner.
++  /// Therefore the top-left point has the minimum X and Y
++  /// Botton-right point is the maximum X and Y
++  if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br)
++    && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br))
++  {
++    // With the region, now check whether or not the input test point is
++    // on the multiples of X and Y
++    // Do not have to worry about negative value, because we have already
++    // check the input bX, and bY is within the region.
++    if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX))
++      || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) )
++    {
++      // if the division will have remainder, that means
++      // the input test point is on the multiples of X and Y
++      fgValid = false;
++    }
++    else
++    {
++    }
++  }
++  else
++  {
++    
++    fgValid = false;
++  }
++  return fgValid;
++}
++
++//--------------------------------------------------------
++//    Function : EyeScanHelper_RunTest()
++// Description : Enable the test, and wait til it is completed
++//   Parameter : None
++//      Return : None
++//        Note : None
++//--------------------------------------------------------
++static void EyeScanHelper_RunTest(struct u3phy_info *info)
++{
++	DRV_UDELAY(100);
++	// Disable the test
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++		, RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0);	//RG_SSUSB_RX_EYE_CNT_EN = 0
++	DRV_UDELAY(100);
++	// Run the test
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++  		, RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1);	//RG_SSUSB_RX_EYE_CNT_EN = 1
++	DRV_UDELAY(100);
++	// Wait til it's done
++	//RGS_SSUSB_RX_EYE_CNT_RDY
++	while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
++  		, RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY));
++}
++
++//--------------------------------------------------------
++//    Function : fgEyeScanHelper_CalNextPoint()
++// Description : Calcualte the test point for the measurement
++//   Parameter : None
++//      Return : BOOL - TRUE :  the next point is within the
++//                              boundaryof HW limit
++//                      FALSE:  the next point is out of the HW limit
++//        Note : The next point is obtained by calculating
++//               from the bottom left of the region rectangle
++//               and then scanning up until it reaches the upper
++//               limit. At this time, the x will increment, and
++//               start scanning downwards until the y hits the
++//               zero.
++//--------------------------------------------------------
++static PHY_INT8 fgEyeScanHelper_CalNextPoint(void)
++{
++  if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN))
++    || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP))
++        )
++  {
++    /// Reaches the limit of Y axis
++    /// Increment X
++    _bXcurr++;
++    _fgXChged = true;
++    _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP;
++
++    if (_bXcurr > MAX_X)
++    {
++      return false;
++    }
++  }
++  else
++  {
++    _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1;
++    _fgXChged = false;
++  }
++  return PHY_TRUE;
++}
++
++PHY_INT32 eyescan_init(struct u3phy_info *info){
++	//initial PHY setting
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega)
++		, RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1);	
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3)
++		, RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1);
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++		, RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1);    //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++		, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1);        //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
++	return PHY_TRUE;
++}
++
++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
++		, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){
++	PHY_INT32 cOfst = 0;
++	PHY_UINT8 bIdxX = 0;
++	PHY_UINT8 bIdxY = 0;
++	//PHY_INT8 bCnt = 0;
++	PHY_UINT8 bIdxCycCnt = 0;
++	PHY_INT8 fgValid;
++	PHY_INT8 cX;
++	PHY_INT8 cY;
++	PHY_UINT8 bExtendCnt;
++	PHY_INT8 isContinue;
++	//PHY_INT8 isBreak;
++	PHY_UINT32 wErr0 = 0, wErr1 = 0;
++	//PHY_UINT32 temp;
++
++	PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++	PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++
++	_rEye1.bX_tl = x_t1;
++	_rEye1.bY_tl = y_t1;
++	_rEye1.bX_br = x_br;
++	_rEye1.bY_br = y_br;
++	_rEye1.bDeltaX = delta_x;
++	_rEye1.bDeltaY = delta_y;
++
++	_rEye2.bX_tl = x_t1;
++	_rEye2.bY_tl = y_t1;
++	_rEye2.bX_br = x_br;
++	_rEye2.bY_br = y_br;
++	_rEye2.bDeltaX = delta_x;
++	_rEye2.bDeltaY = delta_y;
++
++	_rTestCycle.wEyeCnt = eye_cnt;
++	_rTestCycle.bNumOfEyeCnt = num_cnt;
++	_rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt;
++	_rTestCycle.bPICalEn = PI_cal_en;	
++
++	_bXcurr = 0;
++	_bYcurr = 0;
++	_eScanDir = SCAN_DN;
++	_fgXChged = false;
++
++	printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \
++		eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \
++		x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt);		
++
++	//force SIGDET to OFF
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++		, RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1);						//RG_SSUSB_RX_SIGDET_SEL = 1
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++		, RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0);						//RG_SSUSB_RX_SIGDET_EN = 0
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
++		, RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0);				//RG_SSUSB_RX_SIGDET = 0
++
++	// RX_TRI_DET_EN to Disable
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3)
++		, RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0);		//RG_SSUSB_RX_TRI_DET_EN = 0
++
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++		, RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1);		//RG_SSUSB_EYE_MON_EN = 1
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++		, RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0);		//RG_SSUSB_RX_EYE_XOFFSET = 0
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++		, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0);				//RG_SSUSB_RX_EYE0_Y = 0
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++		, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0);				//RG_SSUSB_RX_EYE1_Y = 0
++
++
++	if (PI_cal_en){
++		// PI Calibration
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++			, RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1);	//RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++			, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0);		//RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++			, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1);		//RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
++
++		DRV_UDELAY(20);
++
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
++			, RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0);		//RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
++		_bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
++			, RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO);				//read RGS_SSUSB_RX_PILPO
++
++		printk(KERN_ERR "PI result: %d\n", _bPIResult);
++	}
++	// Read Initial DAC
++	// Set CYCLE
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3)
++		,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt);			//RG_SSUSB_RX_EYE_CNT
++
++	// Eye Monitor Feature
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
++		, RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff);		//RG_SSUSB_RX_EYE_MASK = 0x3ff
++	U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++		, RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1);		//RG_SSUSB_EYE_MON_EN = 1
++
++	// Move X,Y to the top-left corner
++	for (cOfst = 0; cOfst >= -64; cOfst--)
++	{
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++			,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst);	//RG_SSUSB_RX_EYE_XOFFSET
++	}
++	for (cOfst = 0; cOfst < 64; cOfst++)
++	{
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++			, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);			//RG_SSUSB_RX_EYE0_Y
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++			, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);			//RG_SSUSB_RX_EYE1_Y
++	}
++	//ClearErrorResult
++	for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){
++		for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++)
++		{
++			for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){
++				pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0;
++				pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0;
++			}
++		}
++	}
++	isContinue = true;
++	while(isContinue){
++		//printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr);
++		// The point is within the boundary, then let's check if it is within
++	    // the testing region.
++	    // The point is only test-able if one of the eye region
++	    // includes this point.
++	    fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr)
++           || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr);
++		// Translate bX and bY to 2's complement from where the origin was on the
++		// top left corner.
++		// 0x40 and 0x3F needs a bit of thinking!!!! >"<
++		cX = (_bXcurr ^ 0x40);
++		cY = (_bYcurr ^ 0x3F);
++
++		// Set X if necessary
++		if (_fgXChged == true)
++		{
++			U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++				, RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX);		//RG_SSUSB_RX_EYE_XOFFSET
++		}
++		// Set Y
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++			, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY);			//RG_SSUSB_RX_EYE0_Y
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++			, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY);			//RG_SSUSB_RX_EYE1_Y
++
++		/// Test this point!
++		if (fgValid){
++			for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++)
++			{
++				//run test
++				EyeScanHelper_RunTest(info);
++			}
++			for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++)
++			{
++				EyeScanHelper_RunTest(info);
++				wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3)
++					, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0);
++				wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4)
++					, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1);
++
++				pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0;
++				pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1;
++
++				//EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]);
++//				printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n"
++//					, bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]);
++			}
++			//printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]);
++		}
++		else{
++			
++		}
++		if (fgEyeScanHelper_CalNextPoint() == false){
++#if 0
++			printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr);
++		 	printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY);
++#endif
++			printk(KERN_ERR "end of eye scan\n");
++		  	isContinue = false;
++		}
++	}
++	printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
++		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
++		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
++
++	// Move X,Y to the top-left corner
++	for (cOfst = 63; cOfst >= 0; cOfst--)
++	{
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++			, RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst);	//RG_SSUSB_RX_EYE_XOFFSET
++	}
++	for (cOfst = 63; cOfst >= 0; cOfst--)
++	{
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++			, RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);
++		U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
++			, RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);
++
++	}
++	printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
++		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
++		, U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
++
++	printk(KERN_ERR "PI result: %d\n", _bPIResult);
++	printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0);
++	printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1);
++	
++	return PHY_TRUE;
++}
++
++//not used on SoC
++PHY_INT32 u2_save_cur_en(struct u3phy_info *info){
++	return PHY_TRUE;
++}
++
++//not used on SoC
++PHY_INT32 u2_save_cur_re(struct u3phy_info *info){
++	return PHY_TRUE;
++}
++
++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){
++	PHY_INT32 i=0;
++	//PHY_INT32 j=0;
++	//PHY_INT8 u1SrCalVal = 0;
++	//PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN;
++	PHY_INT32 fgRet = 0;	
++	PHY_INT32 u4FmOut = 0;	
++	PHY_INT32 u4Tmp = 0;
++	//PHY_INT32 temp;
++
++	// => RG_USB20_HSTX_SRCAL_EN = 1
++	// enable HS TX SR calibration
++	U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++		, RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1);
++	DRV_MSLEEP(1);
++
++	// => RG_FRCK_EN = 1    
++	// Enable free run clock
++	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
++		, RG_FRCK_EN_OFST, RG_FRCK_EN, 1);
++
++	// MT6290 HS signal quality patch
++	// => RG_CYCLECNT = 400
++	// Setting cyclecnt =400
++	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
++		, RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400);
++
++	// => RG_FREQDET_EN = 1
++	// Enable frequency meter
++	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
++		, RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1);
++
++	// wait for FM detection done, set 10ms timeout
++	for(i=0; i<10; i++){
++		// => u4FmOut = USB_FM_OUT
++		// read FM_OUT
++		u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0));
++		printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut);
++
++		// check if FM detection done 
++		if (u4FmOut != 0)
++		{
++			fgRet = 0;
++			printk("FM detection done! loop = %d\n", i);
++			
++			break;
++		}
++
++		fgRet = 1;
++		DRV_MSLEEP(1);
++	}
++	// => RG_FREQDET_EN = 0
++	// disable frequency meter
++	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
++		, RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0);
++
++	// => RG_FRCK_EN = 0
++	// disable free run clock
++	U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
++		, RG_FRCK_EN_OFST, RG_FRCK_EN, 0);
++
++	// => RG_USB20_HSTX_SRCAL_EN = 0
++	// disable HS TX SR calibration
++	U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++		, RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0);
++	DRV_MSLEEP(1);
++
++	if(u4FmOut == 0){
++		U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++			, RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4);
++		
++		fgRet = 1;
++	}
++	else{
++		// set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits)
++		u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000;
++		printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp);
++		U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
++			, RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp);
++	}
++	return fgRet;
++}
++
++#endif
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy-7621.h
+@@ -0,0 +1,2871 @@
++#ifdef CONFIG_PROJECT_7621
++#ifndef __MTK_PHY_7621_H
++#define __MTK_PHY_7621_H
++
++#define U2_SR_COEF_7621 28
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u2phy_reg {
++	//0x0
++	PHY_LE32 u2phyac0;
++	PHY_LE32 u2phyac1;
++	PHY_LE32 u2phyac2;
++	PHY_LE32 reserve0;
++	//0x10
++	PHY_LE32 u2phyacr0;
++	PHY_LE32 u2phyacr1;
++	PHY_LE32 u2phyacr2;
++	PHY_LE32 u2phyacr3;
++	//0x20
++	PHY_LE32 u2phyacr4;
++	PHY_LE32 u2phyamon0;
++	PHY_LE32 reserve1[2];
++	//0x30~0x50
++	PHY_LE32 reserve2[12];
++	//0x60
++	PHY_LE32 u2phydcr0;
++	PHY_LE32 u2phydcr1;
++	PHY_LE32 u2phydtm0;
++	PHY_LE32 u2phydtm1;
++	//0x70
++	PHY_LE32 u2phydmon0;
++	PHY_LE32 u2phydmon1;
++	PHY_LE32 u2phydmon2;
++	PHY_LE32 u2phydmon3;
++	//0x80
++	PHY_LE32 u2phybc12c;
++	PHY_LE32 u2phybc12c1;
++	PHY_LE32 reserve3[2];
++	//0x90~0xe0
++	PHY_LE32 reserve4[24];
++	//0xf0
++	PHY_LE32 reserve6[3];
++	PHY_LE32 regfcom;
++};
++
++//U3D_U2PHYAC0
++#define RG_USB20_USBPLL_DIVEN                     (0x7<<28) //30:28
++#define RG_USB20_USBPLL_CKCTRL                    (0x3<<26) //27:26
++#define RG_USB20_USBPLL_PREDIV                    (0x3<<24) //25:24
++#define RG_USB20_USBPLL_FORCE_ON                  (0x1<<23) //23:23
++#define RG_USB20_USBPLL_FBDIV                     (0x7f<<16) //22:16
++#define RG_USB20_REF_EN                           (0x1<<15) //15:15
++#define RG_USB20_INTR_EN                          (0x1<<14) //14:14
++#define RG_USB20_BG_TRIM                          (0xf<<8) //11:8
++#define RG_USB20_BG_RBSEL                         (0x3<<6) //7:6
++#define RG_USB20_BG_RASEL                         (0x3<<4) //5:4
++#define RG_USB20_BGR_DIV                          (0x3<<2) //3:2
++#define RG_SIFSLV_CHP_EN                          (0x1<<1) //1:1
++#define RG_SIFSLV_BGR_EN                          (0x1<<0) //0:0
++
++//U3D_U2PHYAC1
++#define RG_USB20_VRT_VREF_SEL                     (0x7<<28) //30:28
++#define RG_USB20_TERM_VREF_SEL                    (0x7<<24) //26:24
++#define RG_USB20_MPX_SEL                          (0xff<<16) //23:16
++#define RG_USB20_MPX_OUT_SEL                      (0x3<<12) //13:12
++#define RG_USB20_TX_PH_ROT_SEL                    (0x7<<8) //10:8
++#define RG_USB20_USBPLL_ACCEN                     (0x1<<3) //3:3
++#define RG_USB20_USBPLL_LF                        (0x1<<2) //2:2
++#define RG_USB20_USBPLL_BR                        (0x1<<1) //1:1
++#define RG_USB20_USBPLL_BP                        (0x1<<0) //0:0
++
++//U3D_U2PHYAC2
++#define RG_SIFSLV_MAC_BANDGAP_EN                  (0x1<<17) //17:17
++#define RG_SIFSLV_MAC_CHOPPER_EN                  (0x1<<16) //16:16
++#define RG_USB20_CLKREF_REV                       (0xff<<0) //7:0
++
++//U3D_U2PHYACR0
++#define RG_USB20_ICUSB_EN                         (0x1<<24) //24:24
++#define RG_USB20_HSTX_SRCAL_EN                    (0x1<<23) //23:23
++#define RG_USB20_HSTX_SRCTRL                      (0x7<<16) //18:16
++#define RG_USB20_LS_CR                            (0x7<<12) //14:12
++#define RG_USB20_FS_CR                            (0x7<<8) //10:8
++#define RG_USB20_LS_SR                            (0x7<<4) //6:4
++#define RG_USB20_FS_SR                            (0x7<<0) //2:0
++
++//U3D_U2PHYACR1
++#define RG_USB20_INIT_SQ_EN_DG                    (0x3<<28) //29:28
++#define RG_USB20_SQD                              (0x3<<24) //25:24
++#define RG_USB20_HSTX_TMODE_SEL                   (0x3<<20) //21:20
++#define RG_USB20_HSTX_TMODE_EN                    (0x1<<19) //19:19
++#define RG_USB20_PHYD_MONEN                       (0x1<<18) //18:18
++#define RG_USB20_INLPBK_EN                        (0x1<<17) //17:17
++#define RG_USB20_CHIRP_EN                         (0x1<<16) //16:16
++#define RG_USB20_DM_ABIST_SOURCE_EN               (0x1<<15) //15:15
++#define RG_USB20_DM_ABIST_SELE                    (0xf<<8) //11:8
++#define RG_USB20_DP_ABIST_SOURCE_EN               (0x1<<7) //7:7
++#define RG_USB20_DP_ABIST_SELE                    (0xf<<0) //3:0
++
++//U3D_U2PHYACR2
++#define RG_USB20_OTG_ABIST_SELE                   (0x7<<29) //31:29
++#define RG_USB20_OTG_ABIST_EN                     (0x1<<28) //28:28
++#define RG_USB20_OTG_VBUSCMP_EN                   (0x1<<27) //27:27
++#define RG_USB20_OTG_VBUSTH                       (0x7<<24) //26:24
++#define RG_USB20_DISC_FIT_EN                      (0x1<<22) //22:22
++#define RG_USB20_DISCD                            (0x3<<20) //21:20
++#define RG_USB20_DISCTH                           (0xf<<16) //19:16
++#define RG_USB20_SQCAL_EN                         (0x1<<15) //15:15
++#define RG_USB20_SQCAL                            (0xf<<8) //11:8
++#define RG_USB20_SQTH                             (0xf<<0) //3:0
++
++//U3D_U2PHYACR3
++#define RG_USB20_HSTX_DBIST                       (0xf<<28) //31:28
++#define RG_USB20_HSTX_BIST_EN                     (0x1<<26) //26:26
++#define RG_USB20_HSTX_I_EN_MODE                   (0x3<<24) //25:24
++#define RG_USB20_HSRX_TMODE_EN                    (0x1<<23) //23:23
++#define RG_USB20_HSRX_BIAS_EN_SEL                 (0x3<<20) //21:20
++#define RG_USB20_USB11_TMODE_EN                   (0x1<<19) //19:19
++#define RG_USB20_TMODE_FS_LS_TX_EN                (0x1<<18) //18:18
++#define RG_USB20_TMODE_FS_LS_RCV_EN               (0x1<<17) //17:17
++#define RG_USB20_TMODE_FS_LS_MODE                 (0x1<<16) //16:16
++#define RG_USB20_HS_TERM_EN_MODE                  (0x3<<13) //14:13
++#define RG_USB20_PUPD_BIST_EN                     (0x1<<12) //12:12
++#define RG_USB20_EN_PU_DM                         (0x1<<11) //11:11
++#define RG_USB20_EN_PD_DM                         (0x1<<10) //10:10
++#define RG_USB20_EN_PU_DP                         (0x1<<9) //9:9
++#define RG_USB20_EN_PD_DP                         (0x1<<8) //8:8
++#define RG_USB20_PHY_REV                          (0xff<<0) //7:0
++
++//U3D_U2PHYACR4
++#define RG_USB20_DP_100K_MODE                     (0x1<<18) //18:18
++#define RG_USB20_DM_100K_EN                       (0x1<<17) //17:17
++#define USB20_DP_100K_EN                          (0x1<<16) //16:16
++#define USB20_GPIO_DM_I                           (0x1<<15) //15:15
++#define USB20_GPIO_DP_I                           (0x1<<14) //14:14
++#define USB20_GPIO_DM_OE                          (0x1<<13) //13:13
++#define USB20_GPIO_DP_OE                          (0x1<<12) //12:12
++#define RG_USB20_GPIO_CTL                         (0x1<<9) //9:9
++#define USB20_GPIO_MODE                           (0x1<<8) //8:8
++#define RG_USB20_TX_BIAS_EN                       (0x1<<5) //5:5
++#define RG_USB20_TX_VCMPDN_EN                     (0x1<<4) //4:4
++#define RG_USB20_HS_SQ_EN_MODE                    (0x3<<2) //3:2
++#define RG_USB20_HS_RCV_EN_MODE                   (0x3<<0) //1:0
++
++//U3D_U2PHYAMON0
++#define RGO_USB20_GPIO_DM_O                       (0x1<<1) //1:1
++#define RGO_USB20_GPIO_DP_O                       (0x1<<0) //0:0
++
++//U3D_U2PHYDCR0
++#define RG_USB20_CDR_TST                          (0x3<<30) //31:30
++#define RG_USB20_GATED_ENB                        (0x1<<29) //29:29
++#define RG_USB20_TESTMODE                         (0x3<<26) //27:26
++#define RG_USB20_PLL_STABLE                       (0x1<<25) //25:25
++#define RG_USB20_PLL_FORCE_ON                     (0x1<<24) //24:24
++#define RG_USB20_PHYD_RESERVE                     (0xffff<<8) //23:8
++#define RG_USB20_EBTHRLD                          (0x1<<7) //7:7
++#define RG_USB20_EARLY_HSTX_I                     (0x1<<6) //6:6
++#define RG_USB20_TX_TST                           (0x1<<5) //5:5
++#define RG_USB20_NEGEDGE_ENB                      (0x1<<4) //4:4
++#define RG_USB20_CDR_FILT                         (0xf<<0) //3:0
++
++//U3D_U2PHYDCR1
++#define RG_USB20_PROBE_SEL                        (0xff<<24) //31:24
++#define RG_USB20_DRVVBUS                          (0x1<<23) //23:23
++#define RG_DEBUG_EN                               (0x1<<22) //22:22
++#define RG_USB20_OTG_PROBE                        (0x3<<20) //21:20
++#define RG_USB20_SW_PLLMODE                       (0x3<<18) //19:18
++#define RG_USB20_BERTH                            (0x3<<16) //17:16
++#define RG_USB20_LBMODE                           (0x3<<13) //14:13
++#define RG_USB20_FORCE_TAP                        (0x1<<12) //12:12
++#define RG_USB20_TAPSEL                           (0xfff<<0) //11:0
++
++//U3D_U2PHYDTM0
++#define RG_UART_MODE                              (0x3<<30) //31:30
++#define FORCE_UART_I                              (0x1<<29) //29:29
++#define FORCE_UART_BIAS_EN                        (0x1<<28) //28:28
++#define FORCE_UART_TX_OE                          (0x1<<27) //27:27
++#define FORCE_UART_EN                             (0x1<<26) //26:26
++#define FORCE_USB_CLKEN                           (0x1<<25) //25:25
++#define FORCE_DRVVBUS                             (0x1<<24) //24:24
++#define FORCE_DATAIN                              (0x1<<23) //23:23
++#define FORCE_TXVALID                             (0x1<<22) //22:22
++#define FORCE_DM_PULLDOWN                         (0x1<<21) //21:21
++#define FORCE_DP_PULLDOWN                         (0x1<<20) //20:20
++#define FORCE_XCVRSEL                             (0x1<<19) //19:19
++#define FORCE_SUSPENDM                            (0x1<<18) //18:18
++#define FORCE_TERMSEL                             (0x1<<17) //17:17
++#define FORCE_OPMODE                              (0x1<<16) //16:16
++#define UTMI_MUXSEL                               (0x1<<15) //15:15
++#define RG_RESET                                  (0x1<<14) //14:14
++#define RG_DATAIN                                 (0xf<<10) //13:10
++#define RG_TXVALIDH                               (0x1<<9) //9:9
++#define RG_TXVALID                                (0x1<<8) //8:8
++#define RG_DMPULLDOWN                             (0x1<<7) //7:7
++#define RG_DPPULLDOWN                             (0x1<<6) //6:6
++#define RG_XCVRSEL                                (0x3<<4) //5:4
++#define RG_SUSPENDM                               (0x1<<3) //3:3
++#define RG_TERMSEL                                (0x1<<2) //2:2
++#define RG_OPMODE                                 (0x3<<0) //1:0
++
++//U3D_U2PHYDTM1
++#define RG_USB20_PRBS7_EN                         (0x1<<31) //31:31
++#define RG_USB20_PRBS7_BITCNT                     (0x3f<<24) //29:24
++#define RG_USB20_CLK48M_EN                        (0x1<<23) //23:23
++#define RG_USB20_CLK60M_EN                        (0x1<<22) //22:22
++#define RG_UART_I                                 (0x1<<19) //19:19
++#define RG_UART_BIAS_EN                           (0x1<<18) //18:18
++#define RG_UART_TX_OE                             (0x1<<17) //17:17
++#define RG_UART_EN                                (0x1<<16) //16:16
++#define FORCE_VBUSVALID                           (0x1<<13) //13:13
++#define FORCE_SESSEND                             (0x1<<12) //12:12
++#define FORCE_BVALID                              (0x1<<11) //11:11
++#define FORCE_AVALID                              (0x1<<10) //10:10
++#define FORCE_IDDIG                               (0x1<<9) //9:9
++#define FORCE_IDPULLUP                            (0x1<<8) //8:8
++#define RG_VBUSVALID                              (0x1<<5) //5:5
++#define RG_SESSEND                                (0x1<<4) //4:4
++#define RG_BVALID                                 (0x1<<3) //3:3
++#define RG_AVALID                                 (0x1<<2) //2:2
++#define RG_IDDIG                                  (0x1<<1) //1:1
++#define RG_IDPULLUP                               (0x1<<0) //0:0
++
++//U3D_U2PHYDMON0
++#define RG_USB20_PRBS7_BERTH                      (0xff<<0) //7:0
++
++//U3D_U2PHYDMON1
++#define USB20_UART_O                              (0x1<<31) //31:31
++#define RGO_USB20_LB_PASS                         (0x1<<30) //30:30
++#define RGO_USB20_LB_DONE                         (0x1<<29) //29:29
++#define AD_USB20_BVALID                           (0x1<<28) //28:28
++#define USB20_IDDIG                               (0x1<<27) //27:27
++#define AD_USB20_VBUSVALID                        (0x1<<26) //26:26
++#define AD_USB20_SESSEND                          (0x1<<25) //25:25
++#define AD_USB20_AVALID                           (0x1<<24) //24:24
++#define USB20_LINE_STATE                          (0x3<<22) //23:22
++#define USB20_HST_DISCON                          (0x1<<21) //21:21
++#define USB20_TX_READY                            (0x1<<20) //20:20
++#define USB20_RX_ERROR                            (0x1<<19) //19:19
++#define USB20_RX_ACTIVE                           (0x1<<18) //18:18
++#define USB20_RX_VALIDH                           (0x1<<17) //17:17
++#define USB20_RX_VALID                            (0x1<<16) //16:16
++#define USB20_DATA_OUT                            (0xffff<<0) //15:0
++
++//U3D_U2PHYDMON2
++#define RGO_TXVALID_CNT                           (0xff<<24) //31:24
++#define RGO_RXACTIVE_CNT                          (0xff<<16) //23:16
++#define RGO_USB20_LB_BERCNT                       (0xff<<8) //15:8
++#define USB20_PROBE_OUT                           (0xff<<0) //7:0
++
++//U3D_U2PHYDMON3
++#define RGO_USB20_PRBS7_ERRCNT                    (0xffff<<16) //31:16
++#define RGO_USB20_PRBS7_DONE                      (0x1<<3) //3:3
++#define RGO_USB20_PRBS7_LOCK                      (0x1<<2) //2:2
++#define RGO_USB20_PRBS7_PASS                      (0x1<<1) //1:1
++#define RGO_USB20_PRBS7_PASSTH                    (0x1<<0) //0:0
++
++//U3D_U2PHYBC12C
++#define RG_SIFSLV_CHGDT_DEGLCH_CNT                (0xf<<28) //31:28
++#define RG_SIFSLV_CHGDT_CTRL_CNT                  (0xf<<24) //27:24
++#define RG_SIFSLV_CHGDT_FORCE_MODE                (0x1<<16) //16:16
++#define RG_CHGDT_ISRC_LEV                         (0x3<<14) //15:14
++#define RG_CHGDT_VDATSRC                          (0x1<<13) //13:13
++#define RG_CHGDT_BGVREF_SEL                       (0x7<<10) //12:10
++#define RG_CHGDT_RDVREF_SEL                       (0x3<<8) //9:8
++#define RG_CHGDT_ISRC_DP                          (0x1<<7) //7:7
++#define RG_SIFSLV_CHGDT_OPOUT_DM                  (0x1<<6) //6:6
++#define RG_CHGDT_VDAT_DM                          (0x1<<5) //5:5
++#define RG_CHGDT_OPOUT_DP                         (0x1<<4) //4:4
++#define RG_SIFSLV_CHGDT_VDAT_DP                   (0x1<<3) //3:3
++#define RG_SIFSLV_CHGDT_COMP_EN                   (0x1<<2) //2:2
++#define RG_SIFSLV_CHGDT_OPDRV_EN                  (0x1<<1) //1:1
++#define RG_CHGDT_EN                               (0x1<<0) //0:0
++
++//U3D_U2PHYBC12C1
++#define RG_CHGDT_REV                              (0xff<<0) //7:0
++
++//U3D_REGFCOM
++#define RG_PAGE                                   (0xff<<24) //31:24
++#define I2C_MODE                                  (0x1<<16) //16:16
++
++
++/* OFFSET  */
++
++//U3D_U2PHYAC0
++#define RG_USB20_USBPLL_DIVEN_OFST                (28)
++#define RG_USB20_USBPLL_CKCTRL_OFST               (26)
++#define RG_USB20_USBPLL_PREDIV_OFST               (24)
++#define RG_USB20_USBPLL_FORCE_ON_OFST             (23)
++#define RG_USB20_USBPLL_FBDIV_OFST                (16)
++#define RG_USB20_REF_EN_OFST                      (15)
++#define RG_USB20_INTR_EN_OFST                     (14)
++#define RG_USB20_BG_TRIM_OFST                     (8)
++#define RG_USB20_BG_RBSEL_OFST                    (6)
++#define RG_USB20_BG_RASEL_OFST                    (4)
++#define RG_USB20_BGR_DIV_OFST                     (2)
++#define RG_SIFSLV_CHP_EN_OFST                     (1)
++#define RG_SIFSLV_BGR_EN_OFST                     (0)
++
++//U3D_U2PHYAC1
++#define RG_USB20_VRT_VREF_SEL_OFST                (28)
++#define RG_USB20_TERM_VREF_SEL_OFST               (24)
++#define RG_USB20_MPX_SEL_OFST                     (16)
++#define RG_USB20_MPX_OUT_SEL_OFST                 (12)
++#define RG_USB20_TX_PH_ROT_SEL_OFST               (8)
++#define RG_USB20_USBPLL_ACCEN_OFST                (3)
++#define RG_USB20_USBPLL_LF_OFST                   (2)
++#define RG_USB20_USBPLL_BR_OFST                   (1)
++#define RG_USB20_USBPLL_BP_OFST                   (0)
++
++//U3D_U2PHYAC2
++#define RG_SIFSLV_MAC_BANDGAP_EN_OFST             (17)
++#define RG_SIFSLV_MAC_CHOPPER_EN_OFST             (16)
++#define RG_USB20_CLKREF_REV_OFST                  (0)
++
++//U3D_U2PHYACR0
++#define RG_USB20_ICUSB_EN_OFST                    (24)
++#define RG_USB20_HSTX_SRCAL_EN_OFST               (23)
++#define RG_USB20_HSTX_SRCTRL_OFST                 (16)
++#define RG_USB20_LS_CR_OFST                       (12)
++#define RG_USB20_FS_CR_OFST                       (8)
++#define RG_USB20_LS_SR_OFST                       (4)
++#define RG_USB20_FS_SR_OFST                       (0)
++
++//U3D_U2PHYACR1
++#define RG_USB20_INIT_SQ_EN_DG_OFST               (28)
++#define RG_USB20_SQD_OFST                         (24)
++#define RG_USB20_HSTX_TMODE_SEL_OFST              (20)
++#define RG_USB20_HSTX_TMODE_EN_OFST               (19)
++#define RG_USB20_PHYD_MONEN_OFST                  (18)
++#define RG_USB20_INLPBK_EN_OFST                   (17)
++#define RG_USB20_CHIRP_EN_OFST                    (16)
++#define RG_USB20_DM_ABIST_SOURCE_EN_OFST          (15)
++#define RG_USB20_DM_ABIST_SELE_OFST               (8)
++#define RG_USB20_DP_ABIST_SOURCE_EN_OFST          (7)
++#define RG_USB20_DP_ABIST_SELE_OFST               (0)
++
++//U3D_U2PHYACR2
++#define RG_USB20_OTG_ABIST_SELE_OFST              (29)
++#define RG_USB20_OTG_ABIST_EN_OFST                (28)
++#define RG_USB20_OTG_VBUSCMP_EN_OFST              (27)
++#define RG_USB20_OTG_VBUSTH_OFST                  (24)
++#define RG_USB20_DISC_FIT_EN_OFST                 (22)
++#define RG_USB20_DISCD_OFST                       (20)
++#define RG_USB20_DISCTH_OFST                      (16)
++#define RG_USB20_SQCAL_EN_OFST                    (15)
++#define RG_USB20_SQCAL_OFST                       (8)
++#define RG_USB20_SQTH_OFST                        (0)
++
++//U3D_U2PHYACR3
++#define RG_USB20_HSTX_DBIST_OFST                  (28)
++#define RG_USB20_HSTX_BIST_EN_OFST                (26)
++#define RG_USB20_HSTX_I_EN_MODE_OFST              (24)
++#define RG_USB20_HSRX_TMODE_EN_OFST               (23)
++#define RG_USB20_HSRX_BIAS_EN_SEL_OFST            (20)
++#define RG_USB20_USB11_TMODE_EN_OFST              (19)
++#define RG_USB20_TMODE_FS_LS_TX_EN_OFST           (18)
++#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST          (17)
++#define RG_USB20_TMODE_FS_LS_MODE_OFST            (16)
++#define RG_USB20_HS_TERM_EN_MODE_OFST             (13)
++#define RG_USB20_PUPD_BIST_EN_OFST                (12)
++#define RG_USB20_EN_PU_DM_OFST                    (11)
++#define RG_USB20_EN_PD_DM_OFST                    (10)
++#define RG_USB20_EN_PU_DP_OFST                    (9)
++#define RG_USB20_EN_PD_DP_OFST                    (8)
++#define RG_USB20_PHY_REV_OFST                     (0)
++
++//U3D_U2PHYACR4
++#define RG_USB20_DP_100K_MODE_OFST                (18)
++#define RG_USB20_DM_100K_EN_OFST                  (17)
++#define USB20_DP_100K_EN_OFST                     (16)
++#define USB20_GPIO_DM_I_OFST                      (15)
++#define USB20_GPIO_DP_I_OFST                      (14)
++#define USB20_GPIO_DM_OE_OFST                     (13)
++#define USB20_GPIO_DP_OE_OFST                     (12)
++#define RG_USB20_GPIO_CTL_OFST                    (9)
++#define USB20_GPIO_MODE_OFST                      (8)
++#define RG_USB20_TX_BIAS_EN_OFST                  (5)
++#define RG_USB20_TX_VCMPDN_EN_OFST                (4)
++#define RG_USB20_HS_SQ_EN_MODE_OFST               (2)
++#define RG_USB20_HS_RCV_EN_MODE_OFST              (0)
++
++//U3D_U2PHYAMON0
++#define RGO_USB20_GPIO_DM_O_OFST                  (1)
++#define RGO_USB20_GPIO_DP_O_OFST                  (0)
++
++//U3D_U2PHYDCR0
++#define RG_USB20_CDR_TST_OFST                     (30)
++#define RG_USB20_GATED_ENB_OFST                   (29)
++#define RG_USB20_TESTMODE_OFST                    (26)
++#define RG_USB20_PLL_STABLE_OFST                  (25)
++#define RG_USB20_PLL_FORCE_ON_OFST                (24)
++#define RG_USB20_PHYD_RESERVE_OFST                (8)
++#define RG_USB20_EBTHRLD_OFST                     (7)
++#define RG_USB20_EARLY_HSTX_I_OFST                (6)
++#define RG_USB20_TX_TST_OFST                      (5)
++#define RG_USB20_NEGEDGE_ENB_OFST                 (4)
++#define RG_USB20_CDR_FILT_OFST                    (0)
++
++//U3D_U2PHYDCR1
++#define RG_USB20_PROBE_SEL_OFST                   (24)
++#define RG_USB20_DRVVBUS_OFST                     (23)
++#define RG_DEBUG_EN_OFST                          (22)
++#define RG_USB20_OTG_PROBE_OFST                   (20)
++#define RG_USB20_SW_PLLMODE_OFST                  (18)
++#define RG_USB20_BERTH_OFST                       (16)
++#define RG_USB20_LBMODE_OFST                      (13)
++#define RG_USB20_FORCE_TAP_OFST                   (12)
++#define RG_USB20_TAPSEL_OFST                      (0)
++
++//U3D_U2PHYDTM0
++#define RG_UART_MODE_OFST                         (30)
++#define FORCE_UART_I_OFST                         (29)
++#define FORCE_UART_BIAS_EN_OFST                   (28)
++#define FORCE_UART_TX_OE_OFST                     (27)
++#define FORCE_UART_EN_OFST                        (26)
++#define FORCE_USB_CLKEN_OFST                      (25)
++#define FORCE_DRVVBUS_OFST                        (24)
++#define FORCE_DATAIN_OFST                         (23)
++#define FORCE_TXVALID_OFST                        (22)
++#define FORCE_DM_PULLDOWN_OFST                    (21)
++#define FORCE_DP_PULLDOWN_OFST                    (20)
++#define FORCE_XCVRSEL_OFST                        (19)
++#define FORCE_SUSPENDM_OFST                       (18)
++#define FORCE_TERMSEL_OFST                        (17)
++#define FORCE_OPMODE_OFST                         (16)
++#define UTMI_MUXSEL_OFST                          (15)
++#define RG_RESET_OFST                             (14)
++#define RG_DATAIN_OFST                            (10)
++#define RG_TXVALIDH_OFST                          (9)
++#define RG_TXVALID_OFST                           (8)
++#define RG_DMPULLDOWN_OFST                        (7)
++#define RG_DPPULLDOWN_OFST                        (6)
++#define RG_XCVRSEL_OFST                           (4)
++#define RG_SUSPENDM_OFST                          (3)
++#define RG_TERMSEL_OFST                           (2)
++#define RG_OPMODE_OFST                            (0)
++
++//U3D_U2PHYDTM1
++#define RG_USB20_PRBS7_EN_OFST                    (31)
++#define RG_USB20_PRBS7_BITCNT_OFST                (24)
++#define RG_USB20_CLK48M_EN_OFST                   (23)
++#define RG_USB20_CLK60M_EN_OFST                   (22)
++#define RG_UART_I_OFST                            (19)
++#define RG_UART_BIAS_EN_OFST                      (18)
++#define RG_UART_TX_OE_OFST                        (17)
++#define RG_UART_EN_OFST                           (16)
++#define FORCE_VBUSVALID_OFST                      (13)
++#define FORCE_SESSEND_OFST                        (12)
++#define FORCE_BVALID_OFST                         (11)
++#define FORCE_AVALID_OFST                         (10)
++#define FORCE_IDDIG_OFST                          (9)
++#define FORCE_IDPULLUP_OFST                       (8)
++#define RG_VBUSVALID_OFST                         (5)
++#define RG_SESSEND_OFST                           (4)
++#define RG_BVALID_OFST                            (3)
++#define RG_AVALID_OFST                            (2)
++#define RG_IDDIG_OFST                             (1)
++#define RG_IDPULLUP_OFST                          (0)
++
++//U3D_U2PHYDMON0
++#define RG_USB20_PRBS7_BERTH_OFST                 (0)
++
++//U3D_U2PHYDMON1
++#define USB20_UART_O_OFST                         (31)
++#define RGO_USB20_LB_PASS_OFST                    (30)
++#define RGO_USB20_LB_DONE_OFST                    (29)
++#define AD_USB20_BVALID_OFST                      (28)
++#define USB20_IDDIG_OFST                          (27)
++#define AD_USB20_VBUSVALID_OFST                   (26)
++#define AD_USB20_SESSEND_OFST                     (25)
++#define AD_USB20_AVALID_OFST                      (24)
++#define USB20_LINE_STATE_OFST                     (22)
++#define USB20_HST_DISCON_OFST                     (21)
++#define USB20_TX_READY_OFST                       (20)
++#define USB20_RX_ERROR_OFST                       (19)
++#define USB20_RX_ACTIVE_OFST                      (18)
++#define USB20_RX_VALIDH_OFST                      (17)
++#define USB20_RX_VALID_OFST                       (16)
++#define USB20_DATA_OUT_OFST                       (0)
++
++//U3D_U2PHYDMON2
++#define RGO_TXVALID_CNT_OFST                      (24)
++#define RGO_RXACTIVE_CNT_OFST                     (16)
++#define RGO_USB20_LB_BERCNT_OFST                  (8)
++#define USB20_PROBE_OUT_OFST                      (0)
++
++//U3D_U2PHYDMON3
++#define RGO_USB20_PRBS7_ERRCNT_OFST               (16)
++#define RGO_USB20_PRBS7_DONE_OFST                 (3)
++#define RGO_USB20_PRBS7_LOCK_OFST                 (2)
++#define RGO_USB20_PRBS7_PASS_OFST                 (1)
++#define RGO_USB20_PRBS7_PASSTH_OFST               (0)
++
++//U3D_U2PHYBC12C
++#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST           (28)
++#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST             (24)
++#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST           (16)
++#define RG_CHGDT_ISRC_LEV_OFST                    (14)
++#define RG_CHGDT_VDATSRC_OFST                     (13)
++#define RG_CHGDT_BGVREF_SEL_OFST                  (10)
++#define RG_CHGDT_RDVREF_SEL_OFST                  (8)
++#define RG_CHGDT_ISRC_DP_OFST                     (7)
++#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST             (6)
++#define RG_CHGDT_VDAT_DM_OFST                     (5)
++#define RG_CHGDT_OPOUT_DP_OFST                    (4)
++#define RG_SIFSLV_CHGDT_VDAT_DP_OFST              (3)
++#define RG_SIFSLV_CHGDT_COMP_EN_OFST              (2)
++#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST             (1)
++#define RG_CHGDT_EN_OFST                          (0)
++
++//U3D_U2PHYBC12C1
++#define RG_CHGDT_REV_OFST                         (0)
++
++//U3D_REGFCOM
++#define RG_PAGE_OFST                              (24)
++#define I2C_MODE_OFST                             (16)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phya_reg {
++	//0x0
++	PHY_LE32 reg0;
++	PHY_LE32 reg1;
++	PHY_LE32 reg2;
++	PHY_LE32 reg3;
++	//0x10
++	PHY_LE32 reg4;
++	PHY_LE32 reg5;
++	PHY_LE32 reg6;
++	PHY_LE32 reg7;
++	//0x20
++	PHY_LE32 reg8;
++	PHY_LE32 reg9;
++	PHY_LE32 rega;
++	PHY_LE32 regb;
++	//0x30
++	PHY_LE32 regc;
++	PHY_LE32 regd;
++	PHY_LE32 rege;
++};
++
++//U3D_reg0
++#define RG_SSUSB_BGR_EN                           (0x1<<31) //31:31
++#define RG_SSUSB_CHPEN                            (0x1<<30) //30:30
++#define RG_SSUSB_BG_DIV                           (0x3<<28) //29:28
++#define RG_SSUSB_INTR_EN                          (0x1<<26) //26:26
++#define RG_SSUSB_MPX_OUT_SEL                      (0x3<<24) //25:24
++#define RG_SSUSB_MPX_SEL                          (0xff<<16) //23:16
++#define RG_SSUSB_REF_EN                           (0x1<<15) //15:15
++#define RG_SSUSB_VRT_VREF_SEL                     (0xf<<11) //14:11
++#define RG_SSUSB_BG_RASEL                         (0x3<<9) //10:9
++#define RG_SSUSB_BG_RBSEL                         (0x3<<7) //8:7
++#define RG_SSUSB_BG_MONEN                         (0x1<<6) //6:6
++#define RG_PCIE_CLKDRV_OFFSET                     (0x3<<0) //1:0
++
++//U3D_reg1
++#define RG_PCIE_CLKDRV_SLEW                       (0x3<<30) //31:30
++#define RG_PCIE_CLKDRV_AMP                        (0x7<<27) //29:27
++#define RG_SSUSB_XTAL_TST_A2DCK_EN                (0x1<<26) //26:26
++#define RG_SSUSB_XTAL_MON_EN                      (0x1<<25) //25:25
++#define RG_SSUSB_XTAL_HYS                         (0x1<<24) //24:24
++#define RG_SSUSB_XTAL_TOP_RESERVE                 (0xffff<<8) //23:8
++#define RG_SSUSB_SYSPLL_RESERVE                   (0xf<<4) //7:4
++#define RG_SSUSB_SYSPLL_FBSEL                     (0x3<<2) //3:2
++#define RG_SSUSB_SYSPLL_PREDIV                    (0x3<<0) //1:0
++
++//U3D_reg2
++#define RG_SSUSB_SYSPLL_LF                        (0x1<<31) //31:31
++#define RG_SSUSB_SYSPLL_FBDIV                     (0x7f<<24) //30:24
++#define RG_SSUSB_SYSPLL_POSDIV                    (0x3<<22) //23:22
++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL               (0x1<<21) //21:21
++#define RG_SSUSB_SYSPLL_BLP                       (0x1<<20) //20:20
++#define RG_SSUSB_SYSPLL_BP                        (0x1<<19) //19:19
++#define RG_SSUSB_SYSPLL_BR                        (0x1<<18) //18:18
++#define RG_SSUSB_SYSPLL_BC                        (0x1<<17) //17:17
++#define RG_SSUSB_SYSPLL_DIVEN                     (0x7<<14) //16:14
++#define RG_SSUSB_SYSPLL_FPEN                      (0x1<<13) //13:13
++#define RG_SSUSB_SYSPLL_MONCK_EN                  (0x1<<12) //12:12
++#define RG_SSUSB_SYSPLL_MONVC_EN                  (0x1<<11) //11:11
++#define RG_SSUSB_SYSPLL_MONREF_EN                 (0x1<<10) //10:10
++#define RG_SSUSB_SYSPLL_VOD_EN                    (0x1<<9) //9:9
++#define RG_SSUSB_SYSPLL_CK_SEL                    (0x1<<8) //8:8
++
++//U3D_reg3
++#define RG_SSUSB_SYSPLL_TOP_RESERVE               (0xffff<<16) //31:16
++
++//U3D_reg4
++#define RG_SSUSB_SYSPLL_PCW_NCPO                  (0x7fffffff<<1) //31:1
++
++//U3D_reg5
++#define RG_SSUSB_SYSPLL_DDS_PI_C                  (0x7<<29) //31:29
++#define RG_SSUSB_SYSPLL_DDS_HF_EN                 (0x1<<28) //28:28
++#define RG_SSUSB_SYSPLL_DDS_PREDIV2               (0x1<<27) //27:27
++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2              (0x1<<26) //26:26
++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN              (0x1<<25) //25:25
++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL            (0x1<<24) //24:24
++#define RG_SSUSB_SYSPLL_DDS_MONEN                 (0x1<<23) //23:23
++#define RG_SSUSB_SYSPLL_DDS_LPF_EN                (0x1<<22) //22:22
++#define RG_SSUSB_SYSPLL_CLK_PH_INV                (0x1<<21) //21:21
++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT               (0x1<<20) //20:20
++#define RG_SSUSB_SYSPLL_DDS_DMY                   (0xffff<<0) //15:0
++
++//U3D_reg6
++#define RG_SSUSB_TX250MCK_INVB                    (0x1<<31) //31:31
++#define RG_SSUSB_IDRV_ITAILOP_EN                  (0x1<<30) //30:30
++#define RG_SSUSB_IDRV_CALIB                       (0x3f<<24) //29:24
++#define RG_SSUSB_TX_R50_FON                       (0x1<<23) //23:23
++#define RG_SSUSB_TX_SR                            (0x7<<20) //22:20
++#define RG_SSUSB_TX_EIDLE_CM                      (0xf<<16) //19:16
++#define RG_SSUSB_RXDET_RSEL                       (0x3<<14) //15:14
++#define RG_SSUSB_RXDET_VTHSEL                     (0x3<<12) //13:12
++#define RG_SSUSB_CKMON_EN                         (0x1<<11) //11:11
++#define RG_SSUSB_CKMON_SEL                        (0x7<<8) //10:8
++#define RG_SSUSB_TX_VLMON_EN                      (0x1<<7) //7:7
++#define RG_SSUSB_TX_VLMON_SEL                     (0x1<<6) //6:6
++#define RG_SSUSB_RXLBTX_EN                        (0x1<<5) //5:5
++#define RG_SSUSB_TXLBRX_EN                        (0x1<<4) //4:4
++
++//U3D_reg7
++#define RG_SSUSB_RESERVE                          (0xfffff<<12) //31:12
++#define RG_SSUSB_PLL_CKCTRL                       (0x3<<10) //11:10
++#define RG_SSUSB_PLL_POSDIV                       (0x3<<8) //9:8
++#define RG_SSUSB_PLL_AUTOK_LOAD                   (0x1<<7) //7:7
++#define RG_SSUSB_PLL_LOAD_RSTB                    (0x1<<6) //6:6
++#define RG_SSUSB_PLL_EP_EN                        (0x1<<5) //5:5
++#define RG_SSUSB_PLL_VOD_EN                       (0x1<<4) //4:4
++#define RG_SSUSB_PLL_V11_EN                       (0x1<<3) //3:3
++#define RG_SSUSB_PLL_MONREF_EN                    (0x1<<2) //2:2
++#define RG_SSUSB_PLL_MONCK_EN                     (0x1<<1) //1:1
++#define RG_SSUSB_PLL_MONVC_EN                     (0x1<<0) //0:0
++
++//U3D_reg8
++#define RG_SSUSB_PLL_RESERVE                      (0xffff<<0) //15:0
++
++//U3D_reg9
++#define RG_SSUSB_PLL_DDS_DMY                      (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_PRD                      (0xffff<<0) //15:0
++
++//U3D_regA
++#define RG_SSUSB_PLL_SSC_PHASE_INI                (0x1<<31) //31:31
++#define RG_SSUSB_PLL_SSC_TRI_EN                   (0x1<<30) //30:30
++#define RG_SSUSB_PLL_CLK_PH_INV                   (0x1<<29) //29:29
++#define RG_SSUSB_PLL_DDS_LPF_EN                   (0x1<<28) //28:28
++#define RG_SSUSB_PLL_DDS_VADJ                     (0x7<<21) //23:21
++#define RG_SSUSB_PLL_DDS_MONEN                    (0x1<<20) //20:20
++#define RG_SSUSB_PLL_DDS_PS_VADJ                  (0x7<<17) //19:17
++#define RG_SSUSB_PLL_DDS_SEL_EXT                  (0x1<<16) //16:16
++#define RG_SSUSB_CDR_PD_DIV_BYPASS                (0x1<<15) //15:15
++#define RG_SSUSB_CDR_PD_DIV_SEL                   (0x1<<14) //14:14
++#define RG_SSUSB_CDR_CPBIAS_SEL                   (0x1<<13) //13:13
++#define RG_SSUSB_CDR_OSCDET_EN                    (0x1<<12) //12:12
++#define RG_SSUSB_CDR_MONMUX                       (0x1<<11) //11:11
++#define RG_SSUSB_CDR_CKCTRL                       (0x3<<9) //10:9
++#define RG_SSUSB_CDR_ACCEN                        (0x1<<8) //8:8
++#define RG_SSUSB_CDR_BYPASS                       (0x3<<6) //7:6
++#define RG_SSUSB_CDR_PI_SLEW                      (0x3<<4) //5:4
++#define RG_SSUSB_CDR_EPEN                         (0x1<<3) //3:3
++#define RG_SSUSB_CDR_AUTOK_LOAD                   (0x1<<2) //2:2
++#define RG_SSUSB_CDR_LOAD_RSTB                    (0x1<<1) //1:1
++#define RG_SSUSB_CDR_MONEN                        (0x1<<0) //0:0
++
++//U3D_regB
++#define RG_SSUSB_CDR_MONEN_DIG                    (0x1<<31) //31:31
++#define RG_SSUSB_CDR_REGOD                        (0x3<<29) //30:29
++#define RG_SSUSB_RX_DAC_EN                        (0x1<<26) //26:26
++#define RG_SSUSB_RX_DAC_PWD                       (0x1<<25) //25:25
++#define RG_SSUSB_EQ_CURSEL                        (0x1<<24) //24:24
++#define RG_SSUSB_RX_DAC_MUX                       (0x1f<<19) //23:19
++#define RG_SSUSB_RX_R2T_EN                        (0x1<<18) //18:18
++#define RG_SSUSB_RX_T2R_EN                        (0x1<<17) //17:17
++#define RG_SSUSB_RX_50_LOWER                      (0x7<<14) //16:14
++#define RG_SSUSB_RX_50_TAR                        (0x3<<12) //13:12
++#define RG_SSUSB_RX_SW_CTRL                       (0xf<<7) //10:7
++#define RG_PCIE_SIGDET_VTH                        (0x3<<5) //6:5
++#define RG_PCIE_SIGDET_LPF                        (0x3<<3) //4:3
++#define RG_SSUSB_LFPS_MON_EN                      (0x1<<2) //2:2
++
++//U3D_regC
++#define RG_SSUSB_RXAFE_DCMON_SEL                  (0xf<<28) //31:28
++#define RG_SSUSB_CDR_RESERVE                      (0xff<<16) //23:16
++#define RG_SSUSB_RXAFE_RESERVE                    (0xff<<8) //15:8
++#define RG_PCIE_RX_RESERVE                        (0xff<<0) //7:0
++
++//U3D_redD
++#define RGS_SSUSB_CDR_NO_OSC                      (0x1<<8) //8:8
++#define RGS_SSUSB_RX_DEBUG_RESERVE                (0xff<<0) //7:0
++
++//U3D_regE
++#define RG_SSUSB_INT_BIAS_SEL                     (0x1<<4) //4:4
++#define RG_SSUSB_EXT_BIAS_SEL                     (0x1<<3) //3:3
++#define RG_SSUSB_RX_P1_ENTRY_PASS                 (0x1<<2) //2:2
++#define RG_SSUSB_RX_PD_RST                        (0x1<<1) //1:1
++#define RG_SSUSB_RX_PD_RST_PASS                   (0x1<<0) //0:0
++
++
++/* OFFSET */
++
++//U3D_reg0
++#define RG_SSUSB_BGR_EN_OFST                      (31)
++#define RG_SSUSB_CHPEN_OFST                       (30)
++#define RG_SSUSB_BG_DIV_OFST                      (28)
++#define RG_SSUSB_INTR_EN_OFST                     (26)
++#define RG_SSUSB_MPX_OUT_SEL_OFST                 (24)
++#define RG_SSUSB_MPX_SEL_OFST                     (16)
++#define RG_SSUSB_REF_EN_OFST                      (15)
++#define RG_SSUSB_VRT_VREF_SEL_OFST                (11)
++#define RG_SSUSB_BG_RASEL_OFST                    (9)
++#define RG_SSUSB_BG_RBSEL_OFST                    (7)
++#define RG_SSUSB_BG_MONEN_OFST                    (6)
++#define RG_PCIE_CLKDRV_OFFSET_OFST                (0)
++
++//U3D_reg1
++#define RG_PCIE_CLKDRV_SLEW_OFST                  (30)
++#define RG_PCIE_CLKDRV_AMP_OFST                   (27)
++#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST           (26)
++#define RG_SSUSB_XTAL_MON_EN_OFST                 (25)
++#define RG_SSUSB_XTAL_HYS_OFST                    (24)
++#define RG_SSUSB_XTAL_TOP_RESERVE_OFST            (8)
++#define RG_SSUSB_SYSPLL_RESERVE_OFST              (4)
++#define RG_SSUSB_SYSPLL_FBSEL_OFST                (2)
++#define RG_SSUSB_SYSPLL_PREDIV_OFST               (0)
++
++//U3D_reg2
++#define RG_SSUSB_SYSPLL_LF_OFST                   (31)
++#define RG_SSUSB_SYSPLL_FBDIV_OFST                (24)
++#define RG_SSUSB_SYSPLL_POSDIV_OFST               (22)
++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST          (21)
++#define RG_SSUSB_SYSPLL_BLP_OFST                  (20)
++#define RG_SSUSB_SYSPLL_BP_OFST                   (19)
++#define RG_SSUSB_SYSPLL_BR_OFST                   (18)
++#define RG_SSUSB_SYSPLL_BC_OFST                   (17)
++#define RG_SSUSB_SYSPLL_DIVEN_OFST                (14)
++#define RG_SSUSB_SYSPLL_FPEN_OFST                 (13)
++#define RG_SSUSB_SYSPLL_MONCK_EN_OFST             (12)
++#define RG_SSUSB_SYSPLL_MONVC_EN_OFST             (11)
++#define RG_SSUSB_SYSPLL_MONREF_EN_OFST            (10)
++#define RG_SSUSB_SYSPLL_VOD_EN_OFST               (9)
++#define RG_SSUSB_SYSPLL_CK_SEL_OFST               (8)
++
++//U3D_reg3
++#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST          (16)
++
++//U3D_reg4
++#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST             (1)
++
++//U3D_reg5
++#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST             (29)
++#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST            (28)
++#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST          (27)
++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST         (26)
++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST         (25)
++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST       (24)
++#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST            (23)
++#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST           (22)
++#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST           (21)
++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST          (20)
++#define RG_SSUSB_SYSPLL_DDS_DMY_OFST              (0)
++
++//U3D_reg6
++#define RG_SSUSB_TX250MCK_INVB_OFST               (31)
++#define RG_SSUSB_IDRV_ITAILOP_EN_OFST             (30)
++#define RG_SSUSB_IDRV_CALIB_OFST                  (24)
++#define RG_SSUSB_TX_R50_FON_OFST                  (23)
++#define RG_SSUSB_TX_SR_OFST                       (20)
++#define RG_SSUSB_TX_EIDLE_CM_OFST                 (16)
++#define RG_SSUSB_RXDET_RSEL_OFST                  (14)
++#define RG_SSUSB_RXDET_VTHSEL_OFST                (12)
++#define RG_SSUSB_CKMON_EN_OFST                    (11)
++#define RG_SSUSB_CKMON_SEL_OFST                   (8)
++#define RG_SSUSB_TX_VLMON_EN_OFST                 (7)
++#define RG_SSUSB_TX_VLMON_SEL_OFST                (6)
++#define RG_SSUSB_RXLBTX_EN_OFST                   (5)
++#define RG_SSUSB_TXLBRX_EN_OFST                   (4)
++
++//U3D_reg7
++#define RG_SSUSB_RESERVE_OFST                     (12)
++#define RG_SSUSB_PLL_CKCTRL_OFST                  (10)
++#define RG_SSUSB_PLL_POSDIV_OFST                  (8)
++#define RG_SSUSB_PLL_AUTOK_LOAD_OFST              (7)
++#define RG_SSUSB_PLL_LOAD_RSTB_OFST               (6)
++#define RG_SSUSB_PLL_EP_EN_OFST                   (5)
++#define RG_SSUSB_PLL_VOD_EN_OFST                  (4)
++#define RG_SSUSB_PLL_V11_EN_OFST                  (3)
++#define RG_SSUSB_PLL_MONREF_EN_OFST               (2)
++#define RG_SSUSB_PLL_MONCK_EN_OFST                (1)
++#define RG_SSUSB_PLL_MONVC_EN_OFST                (0)
++
++//U3D_reg8
++#define RG_SSUSB_PLL_RESERVE_OFST                 (0)
++
++//U3D_reg9
++#define RG_SSUSB_PLL_DDS_DMY_OFST                 (16)
++#define RG_SSUSB_PLL_SSC_PRD_OFST                 (0)
++
++//U3D_regA
++#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST           (31)
++#define RG_SSUSB_PLL_SSC_TRI_EN_OFST              (30)
++#define RG_SSUSB_PLL_CLK_PH_INV_OFST              (29)
++#define RG_SSUSB_PLL_DDS_LPF_EN_OFST              (28)
++#define RG_SSUSB_PLL_DDS_VADJ_OFST                (21)
++#define RG_SSUSB_PLL_DDS_MONEN_OFST               (20)
++#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST             (17)
++#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST             (16)
++#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST           (15)
++#define RG_SSUSB_CDR_PD_DIV_SEL_OFST              (14)
++#define RG_SSUSB_CDR_CPBIAS_SEL_OFST              (13)
++#define RG_SSUSB_CDR_OSCDET_EN_OFST               (12)
++#define RG_SSUSB_CDR_MONMUX_OFST                  (11)
++#define RG_SSUSB_CDR_CKCTRL_OFST                  (9)
++#define RG_SSUSB_CDR_ACCEN_OFST                   (8)
++#define RG_SSUSB_CDR_BYPASS_OFST                  (6)
++#define RG_SSUSB_CDR_PI_SLEW_OFST                 (4)
++#define RG_SSUSB_CDR_EPEN_OFST                    (3)
++#define RG_SSUSB_CDR_AUTOK_LOAD_OFST              (2)
++#define RG_SSUSB_CDR_LOAD_RSTB_OFST               (1)
++#define RG_SSUSB_CDR_MONEN_OFST                   (0)
++
++//U3D_regB
++#define RG_SSUSB_CDR_MONEN_DIG_OFST               (31)
++#define RG_SSUSB_CDR_REGOD_OFST                   (29)
++#define RG_SSUSB_RX_DAC_EN_OFST                   (26)
++#define RG_SSUSB_RX_DAC_PWD_OFST                  (25)
++#define RG_SSUSB_EQ_CURSEL_OFST                   (24)
++#define RG_SSUSB_RX_DAC_MUX_OFST                  (19)
++#define RG_SSUSB_RX_R2T_EN_OFST                   (18)
++#define RG_SSUSB_RX_T2R_EN_OFST                   (17)
++#define RG_SSUSB_RX_50_LOWER_OFST                 (14)
++#define RG_SSUSB_RX_50_TAR_OFST                   (12)
++#define RG_SSUSB_RX_SW_CTRL_OFST                  (7)
++#define RG_PCIE_SIGDET_VTH_OFST                   (5)
++#define RG_PCIE_SIGDET_LPF_OFST                   (3)
++#define RG_SSUSB_LFPS_MON_EN_OFST                 (2)
++
++//U3D_regC
++#define RG_SSUSB_RXAFE_DCMON_SEL_OFST             (28)
++#define RG_SSUSB_CDR_RESERVE_OFST                 (16)
++#define RG_SSUSB_RXAFE_RESERVE_OFST               (8)
++#define RG_PCIE_RX_RESERVE_OFST                   (0)
++
++//U3D_redD
++#define RGS_SSUSB_CDR_NO_OSC_OFST                 (8)
++#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST           (0)
++
++//U3D_regE
++#define RG_SSUSB_INT_BIAS_SEL_OFST                (4)
++#define RG_SSUSB_EXT_BIAS_SEL_OFST                (3)
++#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST            (2)
++#define RG_SSUSB_RX_PD_RST_OFST                   (1)
++#define RG_SSUSB_RX_PD_RST_PASS_OFST              (0)
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phya_da_reg {
++	//0x0
++	PHY_LE32 reg0;
++	PHY_LE32 reg1;
++	PHY_LE32 reg4;
++	PHY_LE32 reg5;
++	//0x10
++	PHY_LE32 reg6;
++	PHY_LE32 reg7;
++	PHY_LE32 reg8;
++	PHY_LE32 reg9;
++	//0x20
++	PHY_LE32 reg10;
++	PHY_LE32 reg12;
++	PHY_LE32 reg13;
++	PHY_LE32 reg14;
++	//0x30
++	PHY_LE32 reg15;
++	PHY_LE32 reg16;
++	PHY_LE32 reg19;
++	PHY_LE32 reg20;
++	//0x40
++	PHY_LE32 reg21;
++	PHY_LE32 reg23;
++	PHY_LE32 reg25;
++	PHY_LE32 reg26;
++	//0x50
++	PHY_LE32 reg28;
++	PHY_LE32 reg29;
++	PHY_LE32 reg30;
++	PHY_LE32 reg31;
++	//0x60
++	PHY_LE32 reg32;
++	PHY_LE32 reg33;
++};
++
++//U3D_reg0
++#define RG_PCIE_SPEED_PE2D                        (0x1<<24) //24:24
++#define RG_PCIE_SPEED_PE2H                        (0x1<<23) //23:23
++#define RG_PCIE_SPEED_PE1D                        (0x1<<22) //22:22
++#define RG_PCIE_SPEED_PE1H                        (0x1<<21) //21:21
++#define RG_PCIE_SPEED_U3                          (0x1<<20) //20:20
++#define RG_SSUSB_XTAL_EXT_EN_PE2D                 (0x3<<18) //19:18
++#define RG_SSUSB_XTAL_EXT_EN_PE2H                 (0x3<<16) //17:16
++#define RG_SSUSB_XTAL_EXT_EN_PE1D                 (0x3<<14) //15:14
++#define RG_SSUSB_XTAL_EXT_EN_PE1H                 (0x3<<12) //13:12
++#define RG_SSUSB_XTAL_EXT_EN_U3                   (0x3<<10) //11:10
++#define RG_SSUSB_CDR_REFCK_SEL_PE2D               (0x3<<8) //9:8
++#define RG_SSUSB_CDR_REFCK_SEL_PE2H               (0x3<<6) //7:6
++#define RG_SSUSB_CDR_REFCK_SEL_PE1D               (0x3<<4) //5:4
++#define RG_SSUSB_CDR_REFCK_SEL_PE1H               (0x3<<2) //3:2
++#define RG_SSUSB_CDR_REFCK_SEL_U3                 (0x3<<0) //1:0
++
++//U3D_reg1
++#define RG_USB20_REFCK_SEL_PE2D                   (0x1<<30) //30:30
++#define RG_USB20_REFCK_SEL_PE2H                   (0x1<<29) //29:29
++#define RG_USB20_REFCK_SEL_PE1D                   (0x1<<28) //28:28
++#define RG_USB20_REFCK_SEL_PE1H                   (0x1<<27) //27:27
++#define RG_USB20_REFCK_SEL_U3                     (0x1<<26) //26:26
++#define RG_PCIE_REFCK_DIV4_PE2D                   (0x1<<25) //25:25
++#define RG_PCIE_REFCK_DIV4_PE2H                   (0x1<<24) //24:24
++#define RG_PCIE_REFCK_DIV4_PE1D                   (0x1<<18) //18:18
++#define RG_PCIE_REFCK_DIV4_PE1H                   (0x1<<17) //17:17
++#define RG_PCIE_REFCK_DIV4_U3                     (0x1<<16) //16:16
++#define RG_PCIE_MODE_PE2D                         (0x1<<8) //8:8
++#define RG_PCIE_MODE_PE2H                         (0x1<<3) //3:3
++#define RG_PCIE_MODE_PE1D                         (0x1<<2) //2:2
++#define RG_PCIE_MODE_PE1H                         (0x1<<1) //1:1
++#define RG_PCIE_MODE_U3                           (0x1<<0) //0:0
++
++//U3D_reg4
++#define RG_SSUSB_PLL_DIVEN_PE2D                   (0x7<<22) //24:22
++#define RG_SSUSB_PLL_DIVEN_PE2H                   (0x7<<19) //21:19
++#define RG_SSUSB_PLL_DIVEN_PE1D                   (0x7<<16) //18:16
++#define RG_SSUSB_PLL_DIVEN_PE1H                   (0x7<<13) //15:13
++#define RG_SSUSB_PLL_DIVEN_U3                     (0x7<<10) //12:10
++#define RG_SSUSB_PLL_BC_PE2D                      (0x3<<8) //9:8
++#define RG_SSUSB_PLL_BC_PE2H                      (0x3<<6) //7:6
++#define RG_SSUSB_PLL_BC_PE1D                      (0x3<<4) //5:4
++#define RG_SSUSB_PLL_BC_PE1H                      (0x3<<2) //3:2
++#define RG_SSUSB_PLL_BC_U3                        (0x3<<0) //1:0
++
++//U3D_reg5
++#define RG_SSUSB_PLL_BR_PE2D                      (0x7<<27) //29:27
++#define RG_SSUSB_PLL_BR_PE2H                      (0x7<<24) //26:24
++#define RG_SSUSB_PLL_BR_PE1D                      (0x7<<21) //23:21
++#define RG_SSUSB_PLL_BR_PE1H                      (0x7<<18) //20:18
++#define RG_SSUSB_PLL_BR_U3                        (0x7<<15) //17:15
++#define RG_SSUSB_PLL_IC_PE2D                      (0x7<<12) //14:12
++#define RG_SSUSB_PLL_IC_PE2H                      (0x7<<9) //11:9
++#define RG_SSUSB_PLL_IC_PE1D                      (0x7<<6) //8:6
++#define RG_SSUSB_PLL_IC_PE1H                      (0x7<<3) //5:3
++#define RG_SSUSB_PLL_IC_U3                        (0x7<<0) //2:0
++
++//U3D_reg6
++#define RG_SSUSB_PLL_IR_PE2D                      (0xf<<24) //27:24
++#define RG_SSUSB_PLL_IR_PE2H                      (0xf<<16) //19:16
++#define RG_SSUSB_PLL_IR_PE1D                      (0xf<<8) //11:8
++#define RG_SSUSB_PLL_IR_PE1H                      (0xf<<4) //7:4
++#define RG_SSUSB_PLL_IR_U3                        (0xf<<0) //3:0
++
++//U3D_reg7
++#define RG_SSUSB_PLL_BP_PE2D                      (0xf<<24) //27:24
++#define RG_SSUSB_PLL_BP_PE2H                      (0xf<<16) //19:16
++#define RG_SSUSB_PLL_BP_PE1D                      (0xf<<8) //11:8
++#define RG_SSUSB_PLL_BP_PE1H                      (0xf<<4) //7:4
++#define RG_SSUSB_PLL_BP_U3                        (0xf<<0) //3:0
++
++//U3D_reg8
++#define RG_SSUSB_PLL_FBKSEL_PE2D                  (0x3<<24) //25:24
++#define RG_SSUSB_PLL_FBKSEL_PE2H                  (0x3<<16) //17:16
++#define RG_SSUSB_PLL_FBKSEL_PE1D                  (0x3<<8) //9:8
++#define RG_SSUSB_PLL_FBKSEL_PE1H                  (0x3<<2) //3:2
++#define RG_SSUSB_PLL_FBKSEL_U3                    (0x3<<0) //1:0
++
++//U3D_reg9
++#define RG_SSUSB_PLL_FBKDIV_PE2H                  (0x7f<<24) //30:24
++#define RG_SSUSB_PLL_FBKDIV_PE1D                  (0x7f<<16) //22:16
++#define RG_SSUSB_PLL_FBKDIV_PE1H                  (0x7f<<8) //14:8
++#define RG_SSUSB_PLL_FBKDIV_U3                    (0x7f<<0) //6:0
++
++//U3D_reg10
++#define RG_SSUSB_PLL_PREDIV_PE2D                  (0x3<<26) //27:26
++#define RG_SSUSB_PLL_PREDIV_PE2H                  (0x3<<24) //25:24
++#define RG_SSUSB_PLL_PREDIV_PE1D                  (0x3<<18) //19:18
++#define RG_SSUSB_PLL_PREDIV_PE1H                  (0x3<<16) //17:16
++#define RG_SSUSB_PLL_PREDIV_U3                    (0x3<<8) //9:8
++#define RG_SSUSB_PLL_FBKDIV_PE2D                  (0x7f<<0) //6:0
++
++//U3D_reg12
++#define RG_SSUSB_PLL_PCW_NCPO_U3                  (0x7fffffff<<0) //30:0
++
++//U3D_reg13
++#define RG_SSUSB_PLL_PCW_NCPO_PE1H                (0x7fffffff<<0) //30:0
++
++//U3D_reg14
++#define RG_SSUSB_PLL_PCW_NCPO_PE1D                (0x7fffffff<<0) //30:0
++
++//U3D_reg15
++#define RG_SSUSB_PLL_PCW_NCPO_PE2H                (0x7fffffff<<0) //30:0
++
++//U3D_reg16
++#define RG_SSUSB_PLL_PCW_NCPO_PE2D                (0x7fffffff<<0) //30:0
++
++//U3D_reg19
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H              (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA1_U3                (0xffff<<0) //15:0
++
++//U3D_reg20
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H              (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D              (0xffff<<0) //15:0
++
++//U3D_reg21
++#define RG_SSUSB_PLL_SSC_DELTA_U3                 (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D              (0xffff<<0) //15:0
++
++//U3D_reg23
++#define RG_SSUSB_PLL_SSC_DELTA_PE1D               (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA_PE1H               (0xffff<<0) //15:0
++
++//U3D_reg25
++#define RG_SSUSB_PLL_SSC_DELTA_PE2D               (0xffff<<16) //31:16
++#define RG_SSUSB_PLL_SSC_DELTA_PE2H               (0xffff<<0) //15:0
++
++//U3D_reg26
++#define RG_SSUSB_PLL_REFCKDIV_PE2D                (0x1<<25) //25:25
++#define RG_SSUSB_PLL_REFCKDIV_PE2H                (0x1<<24) //24:24
++#define RG_SSUSB_PLL_REFCKDIV_PE1D                (0x1<<16) //16:16
++#define RG_SSUSB_PLL_REFCKDIV_PE1H                (0x1<<8) //8:8
++#define RG_SSUSB_PLL_REFCKDIV_U3                  (0x1<<0) //0:0
++
++//U3D_reg28
++#define RG_SSUSB_CDR_BPA_PE2D                     (0x3<<24) //25:24
++#define RG_SSUSB_CDR_BPA_PE2H                     (0x3<<16) //17:16
++#define RG_SSUSB_CDR_BPA_PE1D                     (0x3<<10) //11:10
++#define RG_SSUSB_CDR_BPA_PE1H                     (0x3<<8) //9:8
++#define RG_SSUSB_CDR_BPA_U3                       (0x3<<0) //1:0
++
++//U3D_reg29
++#define RG_SSUSB_CDR_BPB_PE2D                     (0x7<<24) //26:24
++#define RG_SSUSB_CDR_BPB_PE2H                     (0x7<<16) //18:16
++#define RG_SSUSB_CDR_BPB_PE1D                     (0x7<<6) //8:6
++#define RG_SSUSB_CDR_BPB_PE1H                     (0x7<<3) //5:3
++#define RG_SSUSB_CDR_BPB_U3                       (0x7<<0) //2:0
++
++//U3D_reg30
++#define RG_SSUSB_CDR_BR_PE2D                      (0x7<<24) //26:24
++#define RG_SSUSB_CDR_BR_PE2H                      (0x7<<16) //18:16
++#define RG_SSUSB_CDR_BR_PE1D                      (0x7<<6) //8:6
++#define RG_SSUSB_CDR_BR_PE1H                      (0x7<<3) //5:3
++#define RG_SSUSB_CDR_BR_U3                        (0x7<<0) //2:0
++
++//U3D_reg31
++#define RG_SSUSB_CDR_FBDIV_PE2H                   (0x7f<<24) //30:24
++#define RG_SSUSB_CDR_FBDIV_PE1D                   (0x7f<<16) //22:16
++#define RG_SSUSB_CDR_FBDIV_PE1H                   (0x7f<<8) //14:8
++#define RG_SSUSB_CDR_FBDIV_U3                     (0x7f<<0) //6:0
++
++//U3D_reg32
++#define RG_SSUSB_EQ_RSTEP1_PE2D                   (0x3<<30) //31:30
++#define RG_SSUSB_EQ_RSTEP1_PE2H                   (0x3<<28) //29:28
++#define RG_SSUSB_EQ_RSTEP1_PE1D                   (0x3<<26) //27:26
++#define RG_SSUSB_EQ_RSTEP1_PE1H                   (0x3<<24) //25:24
++#define RG_SSUSB_EQ_RSTEP1_U3                     (0x3<<22) //23:22
++#define RG_SSUSB_LFPS_DEGLITCH_PE2D               (0x3<<20) //21:20
++#define RG_SSUSB_LFPS_DEGLITCH_PE2H               (0x3<<18) //19:18
++#define RG_SSUSB_LFPS_DEGLITCH_PE1D               (0x3<<16) //17:16
++#define RG_SSUSB_LFPS_DEGLITCH_PE1H               (0x3<<14) //15:14
++#define RG_SSUSB_LFPS_DEGLITCH_U3                 (0x3<<12) //13:12
++#define RG_SSUSB_CDR_KVSEL_PE2D                   (0x1<<11) //11:11
++#define RG_SSUSB_CDR_KVSEL_PE2H                   (0x1<<10) //10:10
++#define RG_SSUSB_CDR_KVSEL_PE1D                   (0x1<<9) //9:9
++#define RG_SSUSB_CDR_KVSEL_PE1H                   (0x1<<8) //8:8
++#define RG_SSUSB_CDR_KVSEL_U3                     (0x1<<7) //7:7
++#define RG_SSUSB_CDR_FBDIV_PE2D                   (0x7f<<0) //6:0
++
++//U3D_reg33
++#define RG_SSUSB_RX_CMPWD_PE2D                    (0x1<<26) //26:26
++#define RG_SSUSB_RX_CMPWD_PE2H                    (0x1<<25) //25:25
++#define RG_SSUSB_RX_CMPWD_PE1D                    (0x1<<24) //24:24
++#define RG_SSUSB_RX_CMPWD_PE1H                    (0x1<<23) //23:23
++#define RG_SSUSB_RX_CMPWD_U3                      (0x1<<16) //16:16
++#define RG_SSUSB_EQ_RSTEP2_PE2D                   (0x3<<8) //9:8
++#define RG_SSUSB_EQ_RSTEP2_PE2H                   (0x3<<6) //7:6
++#define RG_SSUSB_EQ_RSTEP2_PE1D                   (0x3<<4) //5:4
++#define RG_SSUSB_EQ_RSTEP2_PE1H                   (0x3<<2) //3:2
++#define RG_SSUSB_EQ_RSTEP2_U3                     (0x3<<0) //1:0
++
++
++/* OFFSET  */
++
++//U3D_reg0
++#define RG_PCIE_SPEED_PE2D_OFST                   (24)
++#define RG_PCIE_SPEED_PE2H_OFST                   (23)
++#define RG_PCIE_SPEED_PE1D_OFST                   (22)
++#define RG_PCIE_SPEED_PE1H_OFST                   (21)
++#define RG_PCIE_SPEED_U3_OFST                     (20)
++#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST            (18)
++#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST            (16)
++#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST            (14)
++#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST            (12)
++#define RG_SSUSB_XTAL_EXT_EN_U3_OFST              (10)
++#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST          (8)
++#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST          (6)
++#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST          (4)
++#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST          (2)
++#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST            (0)
++
++//U3D_reg1
++#define RG_USB20_REFCK_SEL_PE2D_OFST              (30)
++#define RG_USB20_REFCK_SEL_PE2H_OFST              (29)
++#define RG_USB20_REFCK_SEL_PE1D_OFST              (28)
++#define RG_USB20_REFCK_SEL_PE1H_OFST              (27)
++#define RG_USB20_REFCK_SEL_U3_OFST                (26)
++#define RG_PCIE_REFCK_DIV4_PE2D_OFST              (25)
++#define RG_PCIE_REFCK_DIV4_PE2H_OFST              (24)
++#define RG_PCIE_REFCK_DIV4_PE1D_OFST              (18)
++#define RG_PCIE_REFCK_DIV4_PE1H_OFST              (17)
++#define RG_PCIE_REFCK_DIV4_U3_OFST                (16)
++#define RG_PCIE_MODE_PE2D_OFST                    (8)
++#define RG_PCIE_MODE_PE2H_OFST                    (3)
++#define RG_PCIE_MODE_PE1D_OFST                    (2)
++#define RG_PCIE_MODE_PE1H_OFST                    (1)
++#define RG_PCIE_MODE_U3_OFST                      (0)
++
++//U3D_reg4
++#define RG_SSUSB_PLL_DIVEN_PE2D_OFST              (22)
++#define RG_SSUSB_PLL_DIVEN_PE2H_OFST              (19)
++#define RG_SSUSB_PLL_DIVEN_PE1D_OFST              (16)
++#define RG_SSUSB_PLL_DIVEN_PE1H_OFST              (13)
++#define RG_SSUSB_PLL_DIVEN_U3_OFST                (10)
++#define RG_SSUSB_PLL_BC_PE2D_OFST                 (8)
++#define RG_SSUSB_PLL_BC_PE2H_OFST                 (6)
++#define RG_SSUSB_PLL_BC_PE1D_OFST                 (4)
++#define RG_SSUSB_PLL_BC_PE1H_OFST                 (2)
++#define RG_SSUSB_PLL_BC_U3_OFST                   (0)
++
++//U3D_reg5
++#define RG_SSUSB_PLL_BR_PE2D_OFST                 (27)
++#define RG_SSUSB_PLL_BR_PE2H_OFST                 (24)
++#define RG_SSUSB_PLL_BR_PE1D_OFST                 (21)
++#define RG_SSUSB_PLL_BR_PE1H_OFST                 (18)
++#define RG_SSUSB_PLL_BR_U3_OFST                   (15)
++#define RG_SSUSB_PLL_IC_PE2D_OFST                 (12)
++#define RG_SSUSB_PLL_IC_PE2H_OFST                 (9)
++#define RG_SSUSB_PLL_IC_PE1D_OFST                 (6)
++#define RG_SSUSB_PLL_IC_PE1H_OFST                 (3)
++#define RG_SSUSB_PLL_IC_U3_OFST                   (0)
++
++//U3D_reg6
++#define RG_SSUSB_PLL_IR_PE2D_OFST                 (24)
++#define RG_SSUSB_PLL_IR_PE2H_OFST                 (16)
++#define RG_SSUSB_PLL_IR_PE1D_OFST                 (8)
++#define RG_SSUSB_PLL_IR_PE1H_OFST                 (4)
++#define RG_SSUSB_PLL_IR_U3_OFST                   (0)
++
++//U3D_reg7
++#define RG_SSUSB_PLL_BP_PE2D_OFST                 (24)
++#define RG_SSUSB_PLL_BP_PE2H_OFST                 (16)
++#define RG_SSUSB_PLL_BP_PE1D_OFST                 (8)
++#define RG_SSUSB_PLL_BP_PE1H_OFST                 (4)
++#define RG_SSUSB_PLL_BP_U3_OFST                   (0)
++
++//U3D_reg8
++#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST             (24)
++#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST             (16)
++#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST             (8)
++#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST             (2)
++#define RG_SSUSB_PLL_FBKSEL_U3_OFST               (0)
++
++//U3D_reg9
++#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST             (24)
++#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST             (16)
++#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST             (8)
++#define RG_SSUSB_PLL_FBKDIV_U3_OFST               (0)
++
++//U3D_reg10
++#define RG_SSUSB_PLL_PREDIV_PE2D_OFST             (26)
++#define RG_SSUSB_PLL_PREDIV_PE2H_OFST             (24)
++#define RG_SSUSB_PLL_PREDIV_PE1D_OFST             (18)
++#define RG_SSUSB_PLL_PREDIV_PE1H_OFST             (16)
++#define RG_SSUSB_PLL_PREDIV_U3_OFST               (8)
++#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST             (0)
++
++//U3D_reg12
++#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST             (0)
++
++//U3D_reg13
++#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST           (0)
++
++//U3D_reg14
++#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST           (0)
++
++//U3D_reg15
++#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST           (0)
++
++//U3D_reg16
++#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST           (0)
++
++//U3D_reg19
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST         (16)
++#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST           (0)
++
++//U3D_reg20
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST         (16)
++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST         (0)
++
++//U3D_reg21
++#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST            (16)
++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST         (0)
++
++//U3D_reg23
++#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST          (16)
++#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST          (0)
++
++//U3D_reg25
++#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST          (16)
++#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST          (0)
++
++//U3D_reg26
++#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST           (25)
++#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST           (24)
++#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST           (16)
++#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST           (8)
++#define RG_SSUSB_PLL_REFCKDIV_U3_OFST             (0)
++
++//U3D_reg28
++#define RG_SSUSB_CDR_BPA_PE2D_OFST                (24)
++#define RG_SSUSB_CDR_BPA_PE2H_OFST                (16)
++#define RG_SSUSB_CDR_BPA_PE1D_OFST                (10)
++#define RG_SSUSB_CDR_BPA_PE1H_OFST                (8)
++#define RG_SSUSB_CDR_BPA_U3_OFST                  (0)
++
++//U3D_reg29
++#define RG_SSUSB_CDR_BPB_PE2D_OFST                (24)
++#define RG_SSUSB_CDR_BPB_PE2H_OFST                (16)
++#define RG_SSUSB_CDR_BPB_PE1D_OFST                (6)
++#define RG_SSUSB_CDR_BPB_PE1H_OFST                (3)
++#define RG_SSUSB_CDR_BPB_U3_OFST                  (0)
++
++//U3D_reg30
++#define RG_SSUSB_CDR_BR_PE2D_OFST                 (24)
++#define RG_SSUSB_CDR_BR_PE2H_OFST                 (16)
++#define RG_SSUSB_CDR_BR_PE1D_OFST                 (6)
++#define RG_SSUSB_CDR_BR_PE1H_OFST                 (3)
++#define RG_SSUSB_CDR_BR_U3_OFST                   (0)
++
++//U3D_reg31
++#define RG_SSUSB_CDR_FBDIV_PE2H_OFST              (24)
++#define RG_SSUSB_CDR_FBDIV_PE1D_OFST              (16)
++#define RG_SSUSB_CDR_FBDIV_PE1H_OFST              (8)
++#define RG_SSUSB_CDR_FBDIV_U3_OFST                (0)
++
++//U3D_reg32
++#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST              (30)
++#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST              (28)
++#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST              (26)
++#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST              (24)
++#define RG_SSUSB_EQ_RSTEP1_U3_OFST                (22)
++#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST          (20)
++#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST          (18)
++#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST          (16)
++#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST          (14)
++#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST            (12)
++#define RG_SSUSB_CDR_KVSEL_PE2D_OFST              (11)
++#define RG_SSUSB_CDR_KVSEL_PE2H_OFST              (10)
++#define RG_SSUSB_CDR_KVSEL_PE1D_OFST              (9)
++#define RG_SSUSB_CDR_KVSEL_PE1H_OFST              (8)
++#define RG_SSUSB_CDR_KVSEL_U3_OFST                (7)
++#define RG_SSUSB_CDR_FBDIV_PE2D_OFST              (0)
++
++//U3D_reg33
++#define RG_SSUSB_RX_CMPWD_PE2D_OFST               (26)
++#define RG_SSUSB_RX_CMPWD_PE2H_OFST               (25)
++#define RG_SSUSB_RX_CMPWD_PE1D_OFST               (24)
++#define RG_SSUSB_RX_CMPWD_PE1H_OFST               (23)
++#define RG_SSUSB_RX_CMPWD_U3_OFST                 (16)
++#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST              (8)
++#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST              (6)
++#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST              (4)
++#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST              (2)
++#define RG_SSUSB_EQ_RSTEP2_U3_OFST                (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phyd_reg {
++	//0x0
++	PHY_LE32 phyd_mix0;
++	PHY_LE32 phyd_mix1;
++	PHY_LE32 phyd_lfps0;
++	PHY_LE32 phyd_lfps1;
++	//0x10
++	PHY_LE32 phyd_impcal0;
++	PHY_LE32 phyd_impcal1;
++	PHY_LE32 phyd_txpll0;
++	PHY_LE32 phyd_txpll1;
++	//0x20
++	PHY_LE32 phyd_txpll2;
++	PHY_LE32 phyd_fl0;
++	PHY_LE32 phyd_mix2;
++	PHY_LE32 phyd_rx0;
++	//0x30
++	PHY_LE32 phyd_t2rlb;
++	PHY_LE32 phyd_cppat;
++	PHY_LE32 phyd_mix3;
++	PHY_LE32 phyd_ebufctl;
++	//0x40
++	PHY_LE32 phyd_pipe0;
++	PHY_LE32 phyd_pipe1;
++	PHY_LE32 phyd_mix4;
++	PHY_LE32 phyd_ckgen0;
++	//0x50
++	PHY_LE32 phyd_mix5;
++	PHY_LE32 phyd_reserved;
++	PHY_LE32 phyd_cdr0;
++	PHY_LE32 phyd_cdr1;
++	//0x60
++	PHY_LE32 phyd_pll_0;
++	PHY_LE32 phyd_pll_1;
++	PHY_LE32 phyd_bcn_det_1;
++	PHY_LE32 phyd_bcn_det_2;
++	//0x70
++	PHY_LE32 eq0;
++	PHY_LE32 eq1;
++	PHY_LE32 eq2;
++	PHY_LE32 eq3;
++	//0x80
++	PHY_LE32 eq_eye0;
++	PHY_LE32 eq_eye1;
++	PHY_LE32 eq_eye2;
++	PHY_LE32 eq_dfe0;
++	//0x90
++	PHY_LE32 eq_dfe1;
++	PHY_LE32 eq_dfe2;
++	PHY_LE32 eq_dfe3;
++	PHY_LE32 reserve0;
++	//0xa0
++	PHY_LE32 phyd_mon0;
++	PHY_LE32 phyd_mon1;
++	PHY_LE32 phyd_mon2;
++	PHY_LE32 phyd_mon3;
++	//0xb0
++	PHY_LE32 phyd_mon4;
++	PHY_LE32 phyd_mon5;
++	PHY_LE32 phyd_mon6;
++	PHY_LE32 phyd_mon7;
++	//0xc0
++	PHY_LE32 phya_rx_mon0;
++	PHY_LE32 phya_rx_mon1;
++	PHY_LE32 phya_rx_mon2;
++	PHY_LE32 phya_rx_mon3;
++	//0xd0
++	PHY_LE32 phya_rx_mon4;
++	PHY_LE32 phya_rx_mon5;
++	PHY_LE32 phyd_cppat2;
++	PHY_LE32 eq_eye3;
++	//0xe0
++	PHY_LE32 kband_out;
++	PHY_LE32 kband_out1;
++};
++
++//U3D_PHYD_MIX0
++#define RG_SSUSB_P_P3_TX_NG                       (0x1<<31) //31:31
++#define RG_SSUSB_TSEQ_EN                          (0x1<<30) //30:30
++#define RG_SSUSB_TSEQ_POLEN                       (0x1<<29) //29:29
++#define RG_SSUSB_TSEQ_POL                         (0x1<<28) //28:28
++#define RG_SSUSB_P_P3_PCLK_NG                     (0x1<<27) //27:27
++#define RG_SSUSB_TSEQ_TH                          (0x7<<24) //26:24
++#define RG_SSUSB_PRBS_BERTH                       (0xff<<16) //23:16
++#define RG_SSUSB_DISABLE_PHY_U2_ON                (0x1<<15) //15:15
++#define RG_SSUSB_DISABLE_PHY_U2_OFF               (0x1<<14) //14:14
++#define RG_SSUSB_PRBS_EN                          (0x1<<13) //13:13
++#define RG_SSUSB_BPSLOCK                          (0x1<<12) //12:12
++#define RG_SSUSB_RTCOMCNT                         (0xf<<8) //11:8
++#define RG_SSUSB_COMCNT                           (0xf<<4) //7:4
++#define RG_SSUSB_PRBSEL_CALIB                     (0xf<<0) //3:0
++
++//U3D_PHYD_MIX1
++#define RG_SSUSB_SLEEP_EN                         (0x1<<31) //31:31
++#define RG_SSUSB_PRBSEL_PCS                       (0x7<<28) //30:28
++#define RG_SSUSB_TXLFPS_PRD                       (0xf<<24) //27:24
++#define RG_SSUSB_P_RX_P0S_CK                      (0x1<<23) //23:23
++#define RG_SSUSB_P_TX_P0S_CK                      (0x1<<22) //22:22
++#define RG_SSUSB_PDNCTL                           (0x3f<<16) //21:16
++#define RG_SSUSB_TX_DRV_EN                        (0x1<<15) //15:15
++#define RG_SSUSB_TX_DRV_SEL                       (0x1<<14) //14:14
++#define RG_SSUSB_TX_DRV_DLY                       (0x3f<<8) //13:8
++#define RG_SSUSB_BERT_EN                          (0x1<<7) //7:7
++#define RG_SSUSB_SCP_TH                           (0x7<<4) //6:4
++#define RG_SSUSB_SCP_EN                           (0x1<<3) //3:3
++#define RG_SSUSB_RXANSIDEC_TEST                   (0x7<<0) //2:0
++
++//U3D_PHYD_LFPS0
++#define RG_SSUSB_LFPS_PWD                         (0x1<<30) //30:30
++#define RG_SSUSB_FORCE_LFPS_PWD                   (0x1<<29) //29:29
++#define RG_SSUSB_RXLFPS_OVF                       (0x1f<<24) //28:24
++#define RG_SSUSB_P3_ENTRY_SEL                     (0x1<<23) //23:23
++#define RG_SSUSB_P3_ENTRY                         (0x1<<22) //22:22
++#define RG_SSUSB_RXLFPS_CDRSEL                    (0x3<<20) //21:20
++#define RG_SSUSB_RXLFPS_CDRTH                     (0xf<<16) //19:16
++#define RG_SSUSB_LOCK5G_BLOCK                     (0x1<<15) //15:15
++#define RG_SSUSB_TFIFO_EXT_D_SEL                  (0x1<<14) //14:14
++#define RG_SSUSB_TFIFO_NO_EXTEND                  (0x1<<13) //13:13
++#define RG_SSUSB_RXLFPS_LOB                       (0x1f<<8) //12:8
++#define RG_SSUSB_TXLFPS_EN                        (0x1<<7) //7:7
++#define RG_SSUSB_TXLFPS_SEL                       (0x1<<6) //6:6
++#define RG_SSUSB_RXLFPS_CDRLOCK                   (0x1<<5) //5:5
++#define RG_SSUSB_RXLFPS_UPB                       (0x1f<<0) //4:0
++
++//U3D_PHYD_LFPS1
++#define RG_SSUSB_RX_IMP_BIAS                      (0xf<<28) //31:28
++#define RG_SSUSB_TX_IMP_BIAS                      (0xf<<24) //27:24
++#define RG_SSUSB_FWAKE_TH                         (0x3f<<16) //21:16
++#define RG_SSUSB_RXLFPS_UDF                       (0x1f<<8) //12:8
++#define RG_SSUSB_RXLFPS_P0IDLETH                  (0xff<<0) //7:0
++
++//U3D_PHYD_IMPCAL0
++#define RG_SSUSB_FORCE_TX_IMPSEL                  (0x1<<31) //31:31
++#define RG_SSUSB_TX_IMPCAL_EN                     (0x1<<30) //30:30
++#define RG_SSUSB_FORCE_TX_IMPCAL_EN               (0x1<<29) //29:29
++#define RG_SSUSB_TX_IMPSEL                        (0x1f<<24) //28:24
++#define RG_SSUSB_TX_IMPCAL_CALCYC                 (0x3f<<16) //21:16
++#define RG_SSUSB_TX_IMPCAL_STBCYC                 (0x1f<<10) //14:10
++#define RG_SSUSB_TX_IMPCAL_CYCCNT                 (0x3ff<<0) //9:0
++
++//U3D_PHYD_IMPCAL1
++#define RG_SSUSB_FORCE_RX_IMPSEL                  (0x1<<31) //31:31
++#define RG_SSUSB_RX_IMPCAL_EN                     (0x1<<30) //30:30
++#define RG_SSUSB_FORCE_RX_IMPCAL_EN               (0x1<<29) //29:29
++#define RG_SSUSB_RX_IMPSEL                        (0x1f<<24) //28:24
++#define RG_SSUSB_RX_IMPCAL_CALCYC                 (0x3f<<16) //21:16
++#define RG_SSUSB_RX_IMPCAL_STBCYC                 (0x1f<<10) //14:10
++#define RG_SSUSB_RX_IMPCAL_CYCCNT                 (0x3ff<<0) //9:0
++
++//U3D_PHYD_TXPLL0
++#define RG_SSUSB_TXPLL_DDSEN_CYC                  (0x1f<<27) //31:27
++#define RG_SSUSB_TXPLL_ON                         (0x1<<26) //26:26
++#define RG_SSUSB_FORCE_TXPLLON                    (0x1<<25) //25:25
++#define RG_SSUSB_TXPLL_STBCYC                     (0x1ff<<16) //24:16
++#define RG_SSUSB_TXPLL_NCPOCHG_CYC                (0xf<<12) //15:12
++#define RG_SSUSB_TXPLL_NCPOEN_CYC                 (0x3<<10) //11:10
++#define RG_SSUSB_TXPLL_DDSRSTB_CYC                (0x7<<0) //2:0
++
++//U3D_PHYD_TXPLL1
++#define RG_SSUSB_PLL_NCPO_EN                      (0x1<<31) //31:31
++#define RG_SSUSB_PLL_FIFO_START_MAN               (0x1<<30) //30:30
++#define RG_SSUSB_PLL_NCPO_CHG                     (0x1<<28) //28:28
++#define RG_SSUSB_PLL_DDS_RSTB                     (0x1<<27) //27:27
++#define RG_SSUSB_PLL_DDS_PWDB                     (0x1<<26) //26:26
++#define RG_SSUSB_PLL_DDSEN                        (0x1<<25) //25:25
++#define RG_SSUSB_PLL_AUTOK_VCO                    (0x1<<24) //24:24
++#define RG_SSUSB_PLL_PWD                          (0x1<<23) //23:23
++#define RG_SSUSB_RX_AFE_PWD                       (0x1<<22) //22:22
++#define RG_SSUSB_PLL_TCADJ                        (0x3f<<16) //21:16
++#define RG_SSUSB_FORCE_CDR_TCADJ                  (0x1<<15) //15:15
++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO              (0x1<<14) //14:14
++#define RG_SSUSB_FORCE_CDR_PWD                    (0x1<<13) //13:13
++#define RG_SSUSB_FORCE_PLL_NCPO_EN                (0x1<<12) //12:12
++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN         (0x1<<11) //11:11
++#define RG_SSUSB_FORCE_PLL_NCPO_CHG               (0x1<<9) //9:9
++#define RG_SSUSB_FORCE_PLL_DDS_RSTB               (0x1<<8) //8:8
++#define RG_SSUSB_FORCE_PLL_DDS_PWDB               (0x1<<7) //7:7
++#define RG_SSUSB_FORCE_PLL_DDSEN                  (0x1<<6) //6:6
++#define RG_SSUSB_FORCE_PLL_TCADJ                  (0x1<<5) //5:5
++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO              (0x1<<4) //4:4
++#define RG_SSUSB_FORCE_PLL_PWD                    (0x1<<3) //3:3
++#define RG_SSUSB_FLT_1_DISPERR_B                  (0x1<<2) //2:2
++
++//U3D_PHYD_TXPLL2
++#define RG_SSUSB_TX_LFPS_EN                       (0x1<<31) //31:31
++#define RG_SSUSB_FORCE_TX_LFPS_EN                 (0x1<<30) //30:30
++#define RG_SSUSB_TX_LFPS                          (0x1<<29) //29:29
++#define RG_SSUSB_FORCE_TX_LFPS                    (0x1<<28) //28:28
++#define RG_SSUSB_RXPLL_STB                        (0x1<<27) //27:27
++#define RG_SSUSB_TXPLL_STB                        (0x1<<26) //26:26
++#define RG_SSUSB_FORCE_RXPLL_STB                  (0x1<<25) //25:25
++#define RG_SSUSB_FORCE_TXPLL_STB                  (0x1<<24) //24:24
++#define RG_SSUSB_RXPLL_REFCKSEL                   (0x1<<16) //16:16
++#define RG_SSUSB_RXPLL_STBMODE                    (0x1<<11) //11:11
++#define RG_SSUSB_RXPLL_ON                         (0x1<<10) //10:10
++#define RG_SSUSB_FORCE_RXPLLON                    (0x1<<9) //9:9
++#define RG_SSUSB_FORCE_RX_AFE_PWD                 (0x1<<8) //8:8
++#define RG_SSUSB_CDR_AUTOK_VCO                    (0x1<<7) //7:7
++#define RG_SSUSB_CDR_PWD                          (0x1<<6) //6:6
++#define RG_SSUSB_CDR_TCADJ                        (0x3f<<0) //5:0
++
++//U3D_PHYD_FL0
++#define RG_SSUSB_RX_FL_TARGET                     (0xffff<<16) //31:16
++#define RG_SSUSB_RX_FL_CYCLECNT                   (0xffff<<0) //15:0
++
++//U3D_PHYD_MIX2
++#define RG_SSUSB_RX_EQ_RST                        (0x1<<31) //31:31
++#define RG_SSUSB_RX_EQ_RST_SEL                    (0x1<<30) //30:30
++#define RG_SSUSB_RXVAL_RST                        (0x1<<29) //29:29
++#define RG_SSUSB_RXVAL_CNT                        (0x1f<<24) //28:24
++#define RG_SSUSB_CDROS_EN                         (0x1<<18) //18:18
++#define RG_SSUSB_CDR_LCKOP                        (0x3<<16) //17:16
++#define RG_SSUSB_RX_FL_LOCKTH                     (0xf<<8) //11:8
++#define RG_SSUSB_RX_FL_OFFSET                     (0xff<<0) //7:0
++
++//U3D_PHYD_RX0
++#define RG_SSUSB_T2RLB_BERTH                      (0xff<<24) //31:24
++#define RG_SSUSB_T2RLB_PAT                        (0xff<<16) //23:16
++#define RG_SSUSB_T2RLB_EN                         (0x1<<15) //15:15
++#define RG_SSUSB_T2RLB_BPSCRAMB                   (0x1<<14) //14:14
++#define RG_SSUSB_T2RLB_SERIAL                     (0x1<<13) //13:13
++#define RG_SSUSB_T2RLB_MODE                       (0x3<<11) //12:11
++#define RG_SSUSB_RX_SAOSC_EN                      (0x1<<10) //10:10
++#define RG_SSUSB_RX_SAOSC_EN_SEL                  (0x1<<9) //9:9
++#define RG_SSUSB_RX_DFE_OPTION                    (0x1<<8) //8:8
++#define RG_SSUSB_RX_DFE_EN                        (0x1<<7) //7:7
++#define RG_SSUSB_RX_DFE_EN_SEL                    (0x1<<6) //6:6
++#define RG_SSUSB_RX_EQ_EN                         (0x1<<5) //5:5
++#define RG_SSUSB_RX_EQ_EN_SEL                     (0x1<<4) //4:4
++#define RG_SSUSB_RX_SAOSC_RST                     (0x1<<3) //3:3
++#define RG_SSUSB_RX_SAOSC_RST_SEL                 (0x1<<2) //2:2
++#define RG_SSUSB_RX_DFE_RST                       (0x1<<1) //1:1
++#define RG_SSUSB_RX_DFE_RST_SEL                   (0x1<<0) //0:0
++
++//U3D_PHYD_T2RLB
++#define RG_SSUSB_EQTRAIN_CH_MODE                  (0x1<<28) //28:28
++#define RG_SSUSB_PRB_OUT_CPPAT                    (0x1<<27) //27:27
++#define RG_SSUSB_BPANSIENC                        (0x1<<26) //26:26
++#define RG_SSUSB_VALID_EN                         (0x1<<25) //25:25
++#define RG_SSUSB_EBUF_SRST                        (0x1<<24) //24:24
++#define RG_SSUSB_K_EMP                            (0xf<<20) //23:20
++#define RG_SSUSB_K_FUL                            (0xf<<16) //19:16
++#define RG_SSUSB_T2RLB_BDATRST                    (0xf<<12) //15:12
++#define RG_SSUSB_P_T2RLB_SKP_EN                   (0x1<<10) //10:10
++#define RG_SSUSB_T2RLB_PATMODE                    (0x3<<8) //9:8
++#define RG_SSUSB_T2RLB_TSEQCNT                    (0xff<<0) //7:0
++
++//U3D_PHYD_CPPAT
++#define RG_SSUSB_CPPAT_PROGRAM_EN                 (0x1<<24) //24:24
++#define RG_SSUSB_CPPAT_TOZ                        (0x3<<21) //22:21
++#define RG_SSUSB_CPPAT_PRBS_EN                    (0x1<<20) //20:20
++#define RG_SSUSB_CPPAT_OUT_TMP2                   (0xf<<16) //19:16
++#define RG_SSUSB_CPPAT_OUT_TMP1                   (0xff<<8) //15:8
++#define RG_SSUSB_CPPAT_OUT_TMP0                   (0xff<<0) //7:0
++
++//U3D_PHYD_MIX3
++#define RG_SSUSB_CDR_TCADJ_MINUS                  (0x1<<31) //31:31
++#define RG_SSUSB_P_CDROS_EN                       (0x1<<30) //30:30
++#define RG_SSUSB_P_P2_TX_DRV_DIS                  (0x1<<28) //28:28
++#define RG_SSUSB_CDR_TCADJ_OFFSET                 (0x7<<24) //26:24
++#define RG_SSUSB_PLL_TCADJ_MINUS                  (0x1<<23) //23:23
++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN            (0x1<<20) //20:20
++#define RG_SSUSB_PLL_BIAS_LPF_EN                  (0x1<<19) //19:19
++#define RG_SSUSB_PLL_TCADJ_OFFSET                 (0x7<<16) //18:16
++#define RG_SSUSB_FORCE_PLL_SSCEN                  (0x1<<15) //15:15
++#define RG_SSUSB_PLL_SSCEN                        (0x1<<14) //14:14
++#define RG_SSUSB_FORCE_CDR_PI_PWD                 (0x1<<13) //13:13
++#define RG_SSUSB_CDR_PI_PWD                       (0x1<<12) //12:12
++#define RG_SSUSB_CDR_PI_MODE                      (0x1<<11) //11:11
++#define RG_SSUSB_TXPLL_SSCEN_CYC                  (0x3ff<<0) //9:0
++
++//U3D_PHYD_EBUFCTL
++#define RG_SSUSB_EBUFCTL                          (0xffffffff<<0) //31:0
++
++//U3D_PHYD_PIPE0
++#define RG_SSUSB_RXTERMINATION                    (0x1<<30) //30:30
++#define RG_SSUSB_RXEQTRAINING                     (0x1<<29) //29:29
++#define RG_SSUSB_RXPOLARITY                       (0x1<<28) //28:28
++#define RG_SSUSB_TXDEEMPH                         (0x3<<26) //27:26
++#define RG_SSUSB_POWERDOWN                        (0x3<<24) //25:24
++#define RG_SSUSB_TXONESZEROS                      (0x1<<23) //23:23
++#define RG_SSUSB_TXELECIDLE                       (0x1<<22) //22:22
++#define RG_SSUSB_TXDETECTRX                       (0x1<<21) //21:21
++#define RG_SSUSB_PIPE_SEL                         (0x1<<20) //20:20
++#define RG_SSUSB_TXDATAK                          (0xf<<16) //19:16
++#define RG_SSUSB_CDR_STABLE_SEL                   (0x1<<15) //15:15
++#define RG_SSUSB_CDR_STABLE                       (0x1<<14) //14:14
++#define RG_SSUSB_CDR_RSTB_SEL                     (0x1<<13) //13:13
++#define RG_SSUSB_CDR_RSTB                         (0x1<<12) //12:12
++#define RG_SSUSB_P_ERROR_SEL                      (0x3<<4) //5:4
++#define RG_SSUSB_TXMARGIN                         (0x7<<1) //3:1
++#define RG_SSUSB_TXCOMPLIANCE                     (0x1<<0) //0:0
++
++//U3D_PHYD_PIPE1
++#define RG_SSUSB_TXDATA                           (0xffffffff<<0) //31:0
++
++//U3D_PHYD_MIX4
++#define RG_SSUSB_CDROS_CNT                        (0x3f<<24) //29:24
++#define RG_SSUSB_T2RLB_BER_EN                     (0x1<<16) //16:16
++#define RG_SSUSB_T2RLB_BER_RATE                   (0xffff<<0) //15:0
++
++//U3D_PHYD_CKGEN0
++#define RG_SSUSB_RFIFO_IMPLAT                     (0x1<<27) //27:27
++#define RG_SSUSB_TFIFO_PSEL                       (0x7<<24) //26:24
++#define RG_SSUSB_CKGEN_PSEL                       (0x3<<8) //9:8
++#define RG_SSUSB_RXCK_INV                         (0x1<<0) //0:0
++
++//U3D_PHYD_MIX5
++#define RG_SSUSB_PRB_SEL                          (0xffff<<16) //31:16
++#define RG_SSUSB_RXPLL_STBCYC                     (0x7ff<<0) //10:0
++
++//U3D_PHYD_RESERVED
++#define RG_SSUSB_PHYD_RESERVE                     (0xffffffff<<0) //31:0
++//#define RG_SSUSB_RX_SIGDET_SEL                    (0x1<<11)
++//#define RG_SSUSB_RX_SIGDET_EN                     (0x1<<12)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL             (0x1<<9)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN              (0x1<<10)
++
++//U3D_PHYD_CDR0
++#define RG_SSUSB_CDR_BIC_LTR                      (0xf<<28) //31:28
++#define RG_SSUSB_CDR_BIC_LTD0                     (0xf<<24) //27:24
++#define RG_SSUSB_CDR_BC_LTD1                      (0x1f<<16) //20:16
++#define RG_SSUSB_CDR_BC_LTR                       (0x1f<<8) //12:8
++#define RG_SSUSB_CDR_BC_LTD0                      (0x1f<<0) //4:0
++
++//U3D_PHYD_CDR1
++#define RG_SSUSB_CDR_BIR_LTD1                     (0x1f<<24) //28:24
++#define RG_SSUSB_CDR_BIR_LTR                      (0x1f<<16) //20:16
++#define RG_SSUSB_CDR_BIR_LTD0                     (0x1f<<8) //12:8
++#define RG_SSUSB_CDR_BW_SEL                       (0x3<<6) //7:6
++#define RG_SSUSB_CDR_BIC_LTD1                     (0xf<<0) //3:0
++
++//U3D_PHYD_PLL_0
++#define RG_SSUSB_FORCE_CDR_BAND_5G                (0x1<<28) //28:28
++#define RG_SSUSB_FORCE_CDR_BAND_2P5G              (0x1<<27) //27:27
++#define RG_SSUSB_FORCE_PLL_BAND_5G                (0x1<<26) //26:26
++#define RG_SSUSB_FORCE_PLL_BAND_2P5G              (0x1<<25) //25:25
++#define RG_SSUSB_P_EQ_T_SEL                       (0x3ff<<15) //24:15
++#define RG_SSUSB_PLL_ISO_EN_CYC                   (0x3ff<<5) //14:5
++#define RG_SSUSB_PLLBAND_RECAL                    (0x1<<4) //4:4
++#define RG_SSUSB_PLL_DDS_ISO_EN                   (0x1<<3) //3:3
++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN             (0x1<<2) //2:2
++#define RG_SSUSB_PLL_DDS_PWR_ON                   (0x1<<1) //1:1
++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON             (0x1<<0) //0:0
++
++//U3D_PHYD_PLL_1
++#define RG_SSUSB_CDR_BAND_5G                      (0xff<<24) //31:24
++#define RG_SSUSB_CDR_BAND_2P5G                    (0xff<<16) //23:16
++#define RG_SSUSB_PLL_BAND_5G                      (0xff<<8) //15:8
++#define RG_SSUSB_PLL_BAND_2P5G                    (0xff<<0) //7:0
++
++//U3D_PHYD_BCN_DET_1
++#define RG_SSUSB_P_BCN_OBS_PRD                    (0xffff<<16) //31:16
++#define RG_SSUSB_U_BCN_OBS_PRD                    (0xffff<<0) //15:0
++
++//U3D_PHYD_BCN_DET_2
++#define RG_SSUSB_P_BCN_OBS_SEL                    (0xfff<<16) //27:16
++#define RG_SSUSB_BCN_DET_DIS                      (0x1<<12) //12:12
++#define RG_SSUSB_U_BCN_OBS_SEL                    (0xfff<<0) //11:0
++
++//U3D_EQ0
++#define RG_SSUSB_EQ_DLHL_LFI                      (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_DHHL_LFI                      (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_DD0HOS_LFI                    (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_DD0LOS_LFI                    (0x7f<<0) //6:0
++
++//U3D_EQ1
++#define RG_SSUSB_EQ_DD1HOS_LFI                    (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_DD1LOS_LFI                    (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_DE0OS_LFI                     (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_DE1OS_LFI                     (0x7f<<0) //6:0
++
++//U3D_EQ2
++#define RG_SSUSB_EQ_DLHLOS_LFI                    (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_DHHLOS_LFI                    (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_STOPTIME                      (0x1<<14) //14:14
++#define RG_SSUSB_EQ_DHHL_LF_SEL                   (0x7<<11) //13:11
++#define RG_SSUSB_EQ_DSAOS_LF_SEL                  (0x7<<8) //10:8
++#define RG_SSUSB_EQ_STARTTIME                     (0x3<<6) //7:6
++#define RG_SSUSB_EQ_DLEQ_LF_SEL                   (0x7<<3) //5:3
++#define RG_SSUSB_EQ_DLHL_LF_SEL                   (0x7<<0) //2:0
++
++//U3D_EQ3
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2                 (0xf<<28) //31:28
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1                 (0xf<<24) //27:24
++#define RG_SSUSB_EQ_DEYE0OS_LFI                   (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_DEYE1OS_LFI                   (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_TRI_DET_EN                    (0x1<<7) //7:7
++#define RG_SSUSB_EQ_TRI_DET_TH                    (0x7f<<0) //6:0
++
++//U3D_EQ_EYE0
++#define RG_SSUSB_EQ_EYE_XOFFSET                   (0x7f<<25) //31:25
++#define RG_SSUSB_EQ_EYE_MON_EN                    (0x1<<24) //24:24
++#define RG_SSUSB_EQ_EYE0_Y                        (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_EYE1_Y                        (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_PILPO_ROUT                    (0x1<<7) //7:7
++#define RG_SSUSB_EQ_PI_KPGAIN                     (0x7<<4) //6:4
++#define RG_SSUSB_EQ_EYE_CNT_EN                    (0x1<<3) //3:3
++
++//U3D_EQ_EYE1
++#define RG_SSUSB_EQ_SIGDET                        (0x7f<<24) //30:24
++#define RG_SSUSB_EQ_EYE_MASK                      (0x3ff<<7) //16:7
++
++//U3D_EQ_EYE2
++#define RG_SSUSB_EQ_RX500M_CK_SEL                 (0x1<<31) //31:31
++#define RG_SSUSB_EQ_SD_CNT1                       (0x3f<<24) //29:24
++#define RG_SSUSB_EQ_ISIFLAG_SEL                   (0x3<<22) //23:22
++#define RG_SSUSB_EQ_SD_CNT0                       (0x3f<<16) //21:16
++
++//U3D_EQ_DFE0
++#define RG_SSUSB_EQ_LEQMAX                        (0xf<<28) //31:28
++#define RG_SSUSB_EQ_DFEX_EN                       (0x1<<27) //27:27
++#define RG_SSUSB_EQ_DFEX_LF_SEL                   (0x7<<24) //26:24
++#define RG_SSUSB_EQ_CHK_EYE_H                     (0x1<<23) //23:23
++#define RG_SSUSB_EQ_PIEYE_INI                     (0x7f<<16) //22:16
++#define RG_SSUSB_EQ_PI90_INI                      (0x7f<<8) //14:8
++#define RG_SSUSB_EQ_PI0_INI                       (0x7f<<0) //6:0
++
++//U3D_EQ_DFE1
++#define RG_SSUSB_EQ_REV                           (0xffff<<16) //31:16
++#define RG_SSUSB_EQ_DFEYEN_DUR                    (0x7<<12) //14:12
++#define RG_SSUSB_EQ_DFEXEN_DUR                    (0x7<<8) //10:8
++#define RG_SSUSB_EQ_DFEX_RST                      (0x1<<7) //7:7
++#define RG_SSUSB_EQ_GATED_RXD_B                   (0x1<<6) //6:6
++#define RG_SSUSB_EQ_PI90CK_SEL                    (0x3<<4) //5:4
++#define RG_SSUSB_EQ_DFEX_DIS                      (0x1<<2) //2:2
++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS               (0x1<<1) //1:1
++#define RG_SSUSB_EQ_DFEXEN_SEL                    (0x1<<0) //0:0
++
++//U3D_EQ_DFE2
++#define RG_SSUSB_EQ_MON_SEL                       (0x1f<<24) //28:24
++#define RG_SSUSB_EQ_LEQOSC_DLYCNT                 (0x7<<16) //18:16
++#define RG_SSUSB_EQ_DLEQOS_LFI                    (0x1f<<8) //12:8
++#define RG_SSUSB_EQ_LEQ_STOP_TO                   (0x3<<0) //1:0
++
++//U3D_EQ_DFE3
++#define RG_SSUSB_EQ_RESERVED                      (0xffffffff<<0) //31:0
++
++//U3D_PHYD_MON0
++#define RGS_SSUSB_BERT_BERC                       (0xffff<<16) //31:16
++#define RGS_SSUSB_LFPS                            (0xf<<12) //15:12
++#define RGS_SSUSB_TRAINDEC                        (0x7<<8) //10:8
++#define RGS_SSUSB_SCP_PAT                         (0xff<<0) //7:0
++
++//U3D_PHYD_MON1
++#define RGS_SSUSB_RX_FL_OUT                       (0xffff<<0) //15:0
++
++//U3D_PHYD_MON2
++#define RGS_SSUSB_T2RLB_ERRCNT                    (0xffff<<16) //31:16
++#define RGS_SSUSB_RETRACK                         (0xf<<12) //15:12
++#define RGS_SSUSB_RXPLL_LOCK                      (0x1<<10) //10:10
++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D               (0x1<<9) //9:9
++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D               (0x1<<8) //8:8
++#define RGS_SSUSB_PDNCTL                          (0xff<<0) //7:0
++
++//U3D_PHYD_MON3
++#define RGS_SSUSB_TSEQ_ERRCNT                     (0xffff<<16) //31:16
++#define RGS_SSUSB_PRBS_ERRCNT                     (0xffff<<0) //15:0
++
++//U3D_PHYD_MON4
++#define RGS_SSUSB_RX_LSLOCK_CNT                   (0xf<<24) //27:24
++#define RGS_SSUSB_SCP_DETCNT                      (0xff<<16) //23:16
++#define RGS_SSUSB_TSEQ_DETCNT                     (0xffff<<0) //15:0
++
++//U3D_PHYD_MON5
++#define RGS_SSUSB_EBUFMSG                         (0xffff<<16) //31:16
++#define RGS_SSUSB_BERT_LOCK                       (0x1<<15) //15:15
++#define RGS_SSUSB_SCP_DET                         (0x1<<14) //14:14
++#define RGS_SSUSB_TSEQ_DET                        (0x1<<13) //13:13
++#define RGS_SSUSB_EBUF_UDF                        (0x1<<12) //12:12
++#define RGS_SSUSB_EBUF_OVF                        (0x1<<11) //11:11
++#define RGS_SSUSB_PRBS_PASSTH                     (0x1<<10) //10:10
++#define RGS_SSUSB_PRBS_PASS                       (0x1<<9) //9:9
++#define RGS_SSUSB_PRBS_LOCK                       (0x1<<8) //8:8
++#define RGS_SSUSB_T2RLB_ERR                       (0x1<<6) //6:6
++#define RGS_SSUSB_T2RLB_PASSTH                    (0x1<<5) //5:5
++#define RGS_SSUSB_T2RLB_PASS                      (0x1<<4) //4:4
++#define RGS_SSUSB_T2RLB_LOCK                      (0x1<<3) //3:3
++#define RGS_SSUSB_RX_IMPCAL_DONE                  (0x1<<2) //2:2
++#define RGS_SSUSB_TX_IMPCAL_DONE                  (0x1<<1) //1:1
++#define RGS_SSUSB_RXDETECTED                      (0x1<<0) //0:0
++
++//U3D_PHYD_MON6
++#define RGS_SSUSB_SIGCAL_DONE                     (0x1<<30) //30:30
++#define RGS_SSUSB_SIGCAL_CAL_OUT                  (0x1<<29) //29:29
++#define RGS_SSUSB_SIGCAL_OFFSET                   (0x1f<<24) //28:24
++#define RGS_SSUSB_RX_IMP_SEL                      (0x1f<<16) //20:16
++#define RGS_SSUSB_TX_IMP_SEL                      (0x1f<<8) //12:8
++#define RGS_SSUSB_TFIFO_MSG                       (0xf<<4) //7:4
++#define RGS_SSUSB_RFIFO_MSG                       (0xf<<0) //3:0
++
++//U3D_PHYD_MON7
++#define RGS_SSUSB_FT_OUT                          (0xff<<8) //15:8
++#define RGS_SSUSB_PRB_OUT                         (0xff<<0) //7:0
++
++//U3D_PHYA_RX_MON0
++#define RGS_SSUSB_EQ_DCLEQ                        (0xf<<24) //27:24
++#define RGS_SSUSB_EQ_DCD0H                        (0x7f<<16) //22:16
++#define RGS_SSUSB_EQ_DCD0L                        (0x7f<<8) //14:8
++#define RGS_SSUSB_EQ_DCD1H                        (0x7f<<0) //6:0
++
++//U3D_PHYA_RX_MON1
++#define RGS_SSUSB_EQ_DCD1L                        (0x7f<<24) //30:24
++#define RGS_SSUSB_EQ_DCE0                         (0x7f<<16) //22:16
++#define RGS_SSUSB_EQ_DCE1                         (0x7f<<8) //14:8
++#define RGS_SSUSB_EQ_DCHHL                        (0x7f<<0) //6:0
++
++//U3D_PHYA_RX_MON2
++#define RGS_SSUSB_EQ_LEQ_STOP                     (0x1<<31) //31:31
++#define RGS_SSUSB_EQ_DCLHL                        (0x7f<<24) //30:24
++#define RGS_SSUSB_EQ_STATUS                       (0xff<<16) //23:16
++#define RGS_SSUSB_EQ_DCEYE0                       (0x7f<<8) //14:8
++#define RGS_SSUSB_EQ_DCEYE1                       (0x7f<<0) //6:0
++
++//U3D_PHYA_RX_MON3
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0         (0xfffff<<0) //19:0
++
++//U3D_PHYA_RX_MON4
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1         (0xfffff<<0) //19:0
++
++//U3D_PHYA_RX_MON5
++#define RGS_SSUSB_EQ_DCLEQOS                      (0x1f<<8) //12:8
++#define RGS_SSUSB_EQ_EYE_CNT_RDY                  (0x1<<7) //7:7
++#define RGS_SSUSB_EQ_PILPO                        (0x7f<<0) //6:0
++
++//U3D_PHYD_CPPAT2
++#define RG_SSUSB_CPPAT_OUT_H_TMP2                 (0xf<<16) //19:16
++#define RG_SSUSB_CPPAT_OUT_H_TMP1                 (0xff<<8) //15:8
++#define RG_SSUSB_CPPAT_OUT_H_TMP0                 (0xff<<0) //7:0
++
++//U3D_EQ_EYE3
++#define RG_SSUSB_EQ_LEQ_SHIFT                     (0x7<<24) //26:24
++#define RG_SSUSB_EQ_EYE_CNT                       (0xfffff<<0) //19:0
++
++//U3D_KBAND_OUT
++#define RGS_SSUSB_CDR_BAND_5G                     (0xff<<24) //31:24
++#define RGS_SSUSB_CDR_BAND_2P5G                   (0xff<<16) //23:16
++#define RGS_SSUSB_PLL_BAND_5G                     (0xff<<8) //15:8
++#define RGS_SSUSB_PLL_BAND_2P5G                   (0xff<<0) //7:0
++
++//U3D_KBAND_OUT1
++#define RGS_SSUSB_CDR_VCOCAL_FAIL                 (0x1<<24) //24:24
++#define RGS_SSUSB_CDR_VCOCAL_STATE                (0xff<<16) //23:16
++#define RGS_SSUSB_PLL_VCOCAL_FAIL                 (0x1<<8) //8:8
++#define RGS_SSUSB_PLL_VCOCAL_STATE                (0xff<<0) //7:0
++
++
++/* OFFSET */
++
++//U3D_PHYD_MIX0
++#define RG_SSUSB_P_P3_TX_NG_OFST                  (31)
++#define RG_SSUSB_TSEQ_EN_OFST                     (30)
++#define RG_SSUSB_TSEQ_POLEN_OFST                  (29)
++#define RG_SSUSB_TSEQ_POL_OFST                    (28)
++#define RG_SSUSB_P_P3_PCLK_NG_OFST                (27)
++#define RG_SSUSB_TSEQ_TH_OFST                     (24)
++#define RG_SSUSB_PRBS_BERTH_OFST                  (16)
++#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST           (15)
++#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST          (14)
++#define RG_SSUSB_PRBS_EN_OFST                     (13)
++#define RG_SSUSB_BPSLOCK_OFST                     (12)
++#define RG_SSUSB_RTCOMCNT_OFST                    (8)
++#define RG_SSUSB_COMCNT_OFST                      (4)
++#define RG_SSUSB_PRBSEL_CALIB_OFST                (0)
++
++//U3D_PHYD_MIX1
++#define RG_SSUSB_SLEEP_EN_OFST                    (31)
++#define RG_SSUSB_PRBSEL_PCS_OFST                  (28)
++#define RG_SSUSB_TXLFPS_PRD_OFST                  (24)
++#define RG_SSUSB_P_RX_P0S_CK_OFST                 (23)
++#define RG_SSUSB_P_TX_P0S_CK_OFST                 (22)
++#define RG_SSUSB_PDNCTL_OFST                      (16)
++#define RG_SSUSB_TX_DRV_EN_OFST                   (15)
++#define RG_SSUSB_TX_DRV_SEL_OFST                  (14)
++#define RG_SSUSB_TX_DRV_DLY_OFST                  (8)
++#define RG_SSUSB_BERT_EN_OFST                     (7)
++#define RG_SSUSB_SCP_TH_OFST                      (4)
++#define RG_SSUSB_SCP_EN_OFST                      (3)
++#define RG_SSUSB_RXANSIDEC_TEST_OFST              (0)
++
++//U3D_PHYD_LFPS0
++#define RG_SSUSB_LFPS_PWD_OFST                    (30)
++#define RG_SSUSB_FORCE_LFPS_PWD_OFST              (29)
++#define RG_SSUSB_RXLFPS_OVF_OFST                  (24)
++#define RG_SSUSB_P3_ENTRY_SEL_OFST                (23)
++#define RG_SSUSB_P3_ENTRY_OFST                    (22)
++#define RG_SSUSB_RXLFPS_CDRSEL_OFST               (20)
++#define RG_SSUSB_RXLFPS_CDRTH_OFST                (16)
++#define RG_SSUSB_LOCK5G_BLOCK_OFST                (15)
++#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST             (14)
++#define RG_SSUSB_TFIFO_NO_EXTEND_OFST             (13)
++#define RG_SSUSB_RXLFPS_LOB_OFST                  (8)
++#define RG_SSUSB_TXLFPS_EN_OFST                   (7)
++#define RG_SSUSB_TXLFPS_SEL_OFST                  (6)
++#define RG_SSUSB_RXLFPS_CDRLOCK_OFST              (5)
++#define RG_SSUSB_RXLFPS_UPB_OFST                  (0)
++
++//U3D_PHYD_LFPS1
++#define RG_SSUSB_RX_IMP_BIAS_OFST                 (28)
++#define RG_SSUSB_TX_IMP_BIAS_OFST                 (24)
++#define RG_SSUSB_FWAKE_TH_OFST                    (16)
++#define RG_SSUSB_RXLFPS_UDF_OFST                  (8)
++#define RG_SSUSB_RXLFPS_P0IDLETH_OFST             (0)
++
++//U3D_PHYD_IMPCAL0
++#define RG_SSUSB_FORCE_TX_IMPSEL_OFST             (31)
++#define RG_SSUSB_TX_IMPCAL_EN_OFST                (30)
++#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST          (29)
++#define RG_SSUSB_TX_IMPSEL_OFST                   (24)
++#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST            (16)
++#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST            (10)
++#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST            (0)
++
++//U3D_PHYD_IMPCAL1
++#define RG_SSUSB_FORCE_RX_IMPSEL_OFST             (31)
++#define RG_SSUSB_RX_IMPCAL_EN_OFST                (30)
++#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST          (29)
++#define RG_SSUSB_RX_IMPSEL_OFST                   (24)
++#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST            (16)
++#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST            (10)
++#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST            (0)
++
++//U3D_PHYD_TXPLL0
++#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST             (27)
++#define RG_SSUSB_TXPLL_ON_OFST                    (26)
++#define RG_SSUSB_FORCE_TXPLLON_OFST               (25)
++#define RG_SSUSB_TXPLL_STBCYC_OFST                (16)
++#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST           (12)
++#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST            (10)
++#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST           (0)
++
++//U3D_PHYD_TXPLL1
++#define RG_SSUSB_PLL_NCPO_EN_OFST                 (31)
++#define RG_SSUSB_PLL_FIFO_START_MAN_OFST          (30)
++#define RG_SSUSB_PLL_NCPO_CHG_OFST                (28)
++#define RG_SSUSB_PLL_DDS_RSTB_OFST                (27)
++#define RG_SSUSB_PLL_DDS_PWDB_OFST                (26)
++#define RG_SSUSB_PLL_DDSEN_OFST                   (25)
++#define RG_SSUSB_PLL_AUTOK_VCO_OFST               (24)
++#define RG_SSUSB_PLL_PWD_OFST                     (23)
++#define RG_SSUSB_RX_AFE_PWD_OFST                  (22)
++#define RG_SSUSB_PLL_TCADJ_OFST                   (16)
++#define RG_SSUSB_FORCE_CDR_TCADJ_OFST             (15)
++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST         (14)
++#define RG_SSUSB_FORCE_CDR_PWD_OFST               (13)
++#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST           (12)
++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST    (11)
++#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST          (9)
++#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST          (8)
++#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST          (7)
++#define RG_SSUSB_FORCE_PLL_DDSEN_OFST             (6)
++#define RG_SSUSB_FORCE_PLL_TCADJ_OFST             (5)
++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST         (4)
++#define RG_SSUSB_FORCE_PLL_PWD_OFST               (3)
++#define RG_SSUSB_FLT_1_DISPERR_B_OFST             (2)
++
++//U3D_PHYD_TXPLL2
++#define RG_SSUSB_TX_LFPS_EN_OFST                  (31)
++#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST            (30)
++#define RG_SSUSB_TX_LFPS_OFST                     (29)
++#define RG_SSUSB_FORCE_TX_LFPS_OFST               (28)
++#define RG_SSUSB_RXPLL_STB_OFST                   (27)
++#define RG_SSUSB_TXPLL_STB_OFST                   (26)
++#define RG_SSUSB_FORCE_RXPLL_STB_OFST             (25)
++#define RG_SSUSB_FORCE_TXPLL_STB_OFST             (24)
++#define RG_SSUSB_RXPLL_REFCKSEL_OFST              (16)
++#define RG_SSUSB_RXPLL_STBMODE_OFST               (11)
++#define RG_SSUSB_RXPLL_ON_OFST                    (10)
++#define RG_SSUSB_FORCE_RXPLLON_OFST               (9)
++#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST            (8)
++#define RG_SSUSB_CDR_AUTOK_VCO_OFST               (7)
++#define RG_SSUSB_CDR_PWD_OFST                     (6)
++#define RG_SSUSB_CDR_TCADJ_OFST                   (0)
++
++//U3D_PHYD_FL0
++#define RG_SSUSB_RX_FL_TARGET_OFST                (16)
++#define RG_SSUSB_RX_FL_CYCLECNT_OFST              (0)
++
++//U3D_PHYD_MIX2
++#define RG_SSUSB_RX_EQ_RST_OFST                   (31)
++#define RG_SSUSB_RX_EQ_RST_SEL_OFST               (30)
++#define RG_SSUSB_RXVAL_RST_OFST                   (29)
++#define RG_SSUSB_RXVAL_CNT_OFST                   (24)
++#define RG_SSUSB_CDROS_EN_OFST                    (18)
++#define RG_SSUSB_CDR_LCKOP_OFST                   (16)
++#define RG_SSUSB_RX_FL_LOCKTH_OFST                (8)
++#define RG_SSUSB_RX_FL_OFFSET_OFST                (0)
++
++//U3D_PHYD_RX0
++#define RG_SSUSB_T2RLB_BERTH_OFST                 (24)
++#define RG_SSUSB_T2RLB_PAT_OFST                   (16)
++#define RG_SSUSB_T2RLB_EN_OFST                    (15)
++#define RG_SSUSB_T2RLB_BPSCRAMB_OFST              (14)
++#define RG_SSUSB_T2RLB_SERIAL_OFST                (13)
++#define RG_SSUSB_T2RLB_MODE_OFST                  (11)
++#define RG_SSUSB_RX_SAOSC_EN_OFST                 (10)
++#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST             (9)
++#define RG_SSUSB_RX_DFE_OPTION_OFST               (8)
++#define RG_SSUSB_RX_DFE_EN_OFST                   (7)
++#define RG_SSUSB_RX_DFE_EN_SEL_OFST               (6)
++#define RG_SSUSB_RX_EQ_EN_OFST                    (5)
++#define RG_SSUSB_RX_EQ_EN_SEL_OFST                (4)
++#define RG_SSUSB_RX_SAOSC_RST_OFST                (3)
++#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST            (2)
++#define RG_SSUSB_RX_DFE_RST_OFST                  (1)
++#define RG_SSUSB_RX_DFE_RST_SEL_OFST              (0)
++
++//U3D_PHYD_T2RLB
++#define RG_SSUSB_EQTRAIN_CH_MODE_OFST             (28)
++#define RG_SSUSB_PRB_OUT_CPPAT_OFST               (27)
++#define RG_SSUSB_BPANSIENC_OFST                   (26)
++#define RG_SSUSB_VALID_EN_OFST                    (25)
++#define RG_SSUSB_EBUF_SRST_OFST                   (24)
++#define RG_SSUSB_K_EMP_OFST                       (20)
++#define RG_SSUSB_K_FUL_OFST                       (16)
++#define RG_SSUSB_T2RLB_BDATRST_OFST               (12)
++#define RG_SSUSB_P_T2RLB_SKP_EN_OFST              (10)
++#define RG_SSUSB_T2RLB_PATMODE_OFST               (8)
++#define RG_SSUSB_T2RLB_TSEQCNT_OFST               (0)
++
++//U3D_PHYD_CPPAT
++#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST            (24)
++#define RG_SSUSB_CPPAT_TOZ_OFST                   (21)
++#define RG_SSUSB_CPPAT_PRBS_EN_OFST               (20)
++#define RG_SSUSB_CPPAT_OUT_TMP2_OFST              (16)
++#define RG_SSUSB_CPPAT_OUT_TMP1_OFST              (8)
++#define RG_SSUSB_CPPAT_OUT_TMP0_OFST              (0)
++
++//U3D_PHYD_MIX3
++#define RG_SSUSB_CDR_TCADJ_MINUS_OFST             (31)
++#define RG_SSUSB_P_CDROS_EN_OFST                  (30)
++#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST             (28)
++#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST            (24)
++#define RG_SSUSB_PLL_TCADJ_MINUS_OFST             (23)
++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST       (20)
++#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST             (19)
++#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST            (16)
++#define RG_SSUSB_FORCE_PLL_SSCEN_OFST             (15)
++#define RG_SSUSB_PLL_SSCEN_OFST                   (14)
++#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST            (13)
++#define RG_SSUSB_CDR_PI_PWD_OFST                  (12)
++#define RG_SSUSB_CDR_PI_MODE_OFST                 (11)
++#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST             (0)
++
++//U3D_PHYD_EBUFCTL
++#define RG_SSUSB_EBUFCTL_OFST                     (0)
++
++//U3D_PHYD_PIPE0
++#define RG_SSUSB_RXTERMINATION_OFST               (30)
++#define RG_SSUSB_RXEQTRAINING_OFST                (29)
++#define RG_SSUSB_RXPOLARITY_OFST                  (28)
++#define RG_SSUSB_TXDEEMPH_OFST                    (26)
++#define RG_SSUSB_POWERDOWN_OFST                   (24)
++#define RG_SSUSB_TXONESZEROS_OFST                 (23)
++#define RG_SSUSB_TXELECIDLE_OFST                  (22)
++#define RG_SSUSB_TXDETECTRX_OFST                  (21)
++#define RG_SSUSB_PIPE_SEL_OFST                    (20)
++#define RG_SSUSB_TXDATAK_OFST                     (16)
++#define RG_SSUSB_CDR_STABLE_SEL_OFST              (15)
++#define RG_SSUSB_CDR_STABLE_OFST                  (14)
++#define RG_SSUSB_CDR_RSTB_SEL_OFST                (13)
++#define RG_SSUSB_CDR_RSTB_OFST                    (12)
++#define RG_SSUSB_P_ERROR_SEL_OFST                 (4)
++#define RG_SSUSB_TXMARGIN_OFST                    (1)
++#define RG_SSUSB_TXCOMPLIANCE_OFST                (0)
++
++//U3D_PHYD_PIPE1
++#define RG_SSUSB_TXDATA_OFST                      (0)
++
++//U3D_PHYD_MIX4
++#define RG_SSUSB_CDROS_CNT_OFST                   (24)
++#define RG_SSUSB_T2RLB_BER_EN_OFST                (16)
++#define RG_SSUSB_T2RLB_BER_RATE_OFST              (0)
++
++//U3D_PHYD_CKGEN0
++#define RG_SSUSB_RFIFO_IMPLAT_OFST                (27)
++#define RG_SSUSB_TFIFO_PSEL_OFST                  (24)
++#define RG_SSUSB_CKGEN_PSEL_OFST                  (8)
++#define RG_SSUSB_RXCK_INV_OFST                    (0)
++
++//U3D_PHYD_MIX5
++#define RG_SSUSB_PRB_SEL_OFST                     (16)
++#define RG_SSUSB_RXPLL_STBCYC_OFST                (0)
++
++//U3D_PHYD_RESERVED
++#define RG_SSUSB_PHYD_RESERVE_OFST                (0)
++//#define RG_SSUSB_RX_SIGDET_SEL_OFST               (11)
++//#define RG_SSUSB_RX_SIGDET_EN_OFST                (12)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST        (9)
++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST         (10)
++
++//U3D_PHYD_CDR0
++#define RG_SSUSB_CDR_BIC_LTR_OFST                 (28)
++#define RG_SSUSB_CDR_BIC_LTD0_OFST                (24)
++#define RG_SSUSB_CDR_BC_LTD1_OFST                 (16)
++#define RG_SSUSB_CDR_BC_LTR_OFST                  (8)
++#define RG_SSUSB_CDR_BC_LTD0_OFST                 (0)
++
++//U3D_PHYD_CDR1
++#define RG_SSUSB_CDR_BIR_LTD1_OFST                (24)
++#define RG_SSUSB_CDR_BIR_LTR_OFST                 (16)
++#define RG_SSUSB_CDR_BIR_LTD0_OFST                (8)
++#define RG_SSUSB_CDR_BW_SEL_OFST                  (6)
++#define RG_SSUSB_CDR_BIC_LTD1_OFST                (0)
++
++//U3D_PHYD_PLL_0
++#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST           (28)
++#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST         (27)
++#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST           (26)
++#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST         (25)
++#define RG_SSUSB_P_EQ_T_SEL_OFST                  (15)
++#define RG_SSUSB_PLL_ISO_EN_CYC_OFST              (5)
++#define RG_SSUSB_PLLBAND_RECAL_OFST               (4)
++#define RG_SSUSB_PLL_DDS_ISO_EN_OFST              (3)
++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST        (2)
++#define RG_SSUSB_PLL_DDS_PWR_ON_OFST              (1)
++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST        (0)
++
++//U3D_PHYD_PLL_1
++#define RG_SSUSB_CDR_BAND_5G_OFST                 (24)
++#define RG_SSUSB_CDR_BAND_2P5G_OFST               (16)
++#define RG_SSUSB_PLL_BAND_5G_OFST                 (8)
++#define RG_SSUSB_PLL_BAND_2P5G_OFST               (0)
++
++//U3D_PHYD_BCN_DET_1
++#define RG_SSUSB_P_BCN_OBS_PRD_OFST               (16)
++#define RG_SSUSB_U_BCN_OBS_PRD_OFST               (0)
++
++//U3D_PHYD_BCN_DET_2
++#define RG_SSUSB_P_BCN_OBS_SEL_OFST               (16)
++#define RG_SSUSB_BCN_DET_DIS_OFST                 (12)
++#define RG_SSUSB_U_BCN_OBS_SEL_OFST               (0)
++
++//U3D_EQ0
++#define RG_SSUSB_EQ_DLHL_LFI_OFST                 (24)
++#define RG_SSUSB_EQ_DHHL_LFI_OFST                 (16)
++#define RG_SSUSB_EQ_DD0HOS_LFI_OFST               (8)
++#define RG_SSUSB_EQ_DD0LOS_LFI_OFST               (0)
++
++//U3D_EQ1
++#define RG_SSUSB_EQ_DD1HOS_LFI_OFST               (24)
++#define RG_SSUSB_EQ_DD1LOS_LFI_OFST               (16)
++#define RG_SSUSB_EQ_DE0OS_LFI_OFST                (8)
++#define RG_SSUSB_EQ_DE1OS_LFI_OFST                (0)
++
++//U3D_EQ2
++#define RG_SSUSB_EQ_DLHLOS_LFI_OFST               (24)
++#define RG_SSUSB_EQ_DHHLOS_LFI_OFST               (16)
++#define RG_SSUSB_EQ_STOPTIME_OFST                 (14)
++#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST              (11)
++#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST             (8)
++#define RG_SSUSB_EQ_STARTTIME_OFST                (6)
++#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST              (3)
++#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST              (0)
++
++//U3D_EQ3
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST            (28)
++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST            (24)
++#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST              (16)
++#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST              (8)
++#define RG_SSUSB_EQ_TRI_DET_EN_OFST               (7)
++#define RG_SSUSB_EQ_TRI_DET_TH_OFST               (0)
++
++//U3D_EQ_EYE0
++#define RG_SSUSB_EQ_EYE_XOFFSET_OFST              (25)
++#define RG_SSUSB_EQ_EYE_MON_EN_OFST               (24)
++#define RG_SSUSB_EQ_EYE0_Y_OFST                   (16)
++#define RG_SSUSB_EQ_EYE1_Y_OFST                   (8)
++#define RG_SSUSB_EQ_PILPO_ROUT_OFST               (7)
++#define RG_SSUSB_EQ_PI_KPGAIN_OFST                (4)
++#define RG_SSUSB_EQ_EYE_CNT_EN_OFST               (3)
++
++//U3D_EQ_EYE1
++#define RG_SSUSB_EQ_SIGDET_OFST                   (24)
++#define RG_SSUSB_EQ_EYE_MASK_OFST                 (7)
++
++//U3D_EQ_EYE2
++#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST            (31)
++#define RG_SSUSB_EQ_SD_CNT1_OFST                  (24)
++#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST              (22)
++#define RG_SSUSB_EQ_SD_CNT0_OFST                  (16)
++
++//U3D_EQ_DFE0
++#define RG_SSUSB_EQ_LEQMAX_OFST                   (28)
++#define RG_SSUSB_EQ_DFEX_EN_OFST                  (27)
++#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST              (24)
++#define RG_SSUSB_EQ_CHK_EYE_H_OFST                (23)
++#define RG_SSUSB_EQ_PIEYE_INI_OFST                (16)
++#define RG_SSUSB_EQ_PI90_INI_OFST                 (8)
++#define RG_SSUSB_EQ_PI0_INI_OFST                  (0)
++
++//U3D_EQ_DFE1
++#define RG_SSUSB_EQ_REV_OFST                      (16)
++#define RG_SSUSB_EQ_DFEYEN_DUR_OFST               (12)
++#define RG_SSUSB_EQ_DFEXEN_DUR_OFST               (8)
++#define RG_SSUSB_EQ_DFEX_RST_OFST                 (7)
++#define RG_SSUSB_EQ_GATED_RXD_B_OFST              (6)
++#define RG_SSUSB_EQ_PI90CK_SEL_OFST               (4)
++#define RG_SSUSB_EQ_DFEX_DIS_OFST                 (2)
++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST          (1)
++#define RG_SSUSB_EQ_DFEXEN_SEL_OFST               (0)
++
++//U3D_EQ_DFE2
++#define RG_SSUSB_EQ_MON_SEL_OFST                  (24)
++#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST            (16)
++#define RG_SSUSB_EQ_DLEQOS_LFI_OFST               (8)
++#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST              (0)
++
++//U3D_EQ_DFE3
++#define RG_SSUSB_EQ_RESERVED_OFST                 (0)
++
++//U3D_PHYD_MON0
++#define RGS_SSUSB_BERT_BERC_OFST                  (16)
++#define RGS_SSUSB_LFPS_OFST                       (12)
++#define RGS_SSUSB_TRAINDEC_OFST                   (8)
++#define RGS_SSUSB_SCP_PAT_OFST                    (0)
++
++//U3D_PHYD_MON1
++#define RGS_SSUSB_RX_FL_OUT_OFST                  (0)
++
++//U3D_PHYD_MON2
++#define RGS_SSUSB_T2RLB_ERRCNT_OFST               (16)
++#define RGS_SSUSB_RETRACK_OFST                    (12)
++#define RGS_SSUSB_RXPLL_LOCK_OFST                 (10)
++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST          (9)
++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST          (8)
++#define RGS_SSUSB_PDNCTL_OFST                     (0)
++
++//U3D_PHYD_MON3
++#define RGS_SSUSB_TSEQ_ERRCNT_OFST                (16)
++#define RGS_SSUSB_PRBS_ERRCNT_OFST                (0)
++
++//U3D_PHYD_MON4
++#define RGS_SSUSB_RX_LSLOCK_CNT_OFST              (24)
++#define RGS_SSUSB_SCP_DETCNT_OFST                 (16)
++#define RGS_SSUSB_TSEQ_DETCNT_OFST                (0)
++
++//U3D_PHYD_MON5
++#define RGS_SSUSB_EBUFMSG_OFST                    (16)
++#define RGS_SSUSB_BERT_LOCK_OFST                  (15)
++#define RGS_SSUSB_SCP_DET_OFST                    (14)
++#define RGS_SSUSB_TSEQ_DET_OFST                   (13)
++#define RGS_SSUSB_EBUF_UDF_OFST                   (12)
++#define RGS_SSUSB_EBUF_OVF_OFST                   (11)
++#define RGS_SSUSB_PRBS_PASSTH_OFST                (10)
++#define RGS_SSUSB_PRBS_PASS_OFST                  (9)
++#define RGS_SSUSB_PRBS_LOCK_OFST                  (8)
++#define RGS_SSUSB_T2RLB_ERR_OFST                  (6)
++#define RGS_SSUSB_T2RLB_PASSTH_OFST               (5)
++#define RGS_SSUSB_T2RLB_PASS_OFST                 (4)
++#define RGS_SSUSB_T2RLB_LOCK_OFST                 (3)
++#define RGS_SSUSB_RX_IMPCAL_DONE_OFST             (2)
++#define RGS_SSUSB_TX_IMPCAL_DONE_OFST             (1)
++#define RGS_SSUSB_RXDETECTED_OFST                 (0)
++
++//U3D_PHYD_MON6
++#define RGS_SSUSB_SIGCAL_DONE_OFST                (30)
++#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST             (29)
++#define RGS_SSUSB_SIGCAL_OFFSET_OFST              (24)
++#define RGS_SSUSB_RX_IMP_SEL_OFST                 (16)
++#define RGS_SSUSB_TX_IMP_SEL_OFST                 (8)
++#define RGS_SSUSB_TFIFO_MSG_OFST                  (4)
++#define RGS_SSUSB_RFIFO_MSG_OFST                  (0)
++
++//U3D_PHYD_MON7
++#define RGS_SSUSB_FT_OUT_OFST                     (8)
++#define RGS_SSUSB_PRB_OUT_OFST                    (0)
++
++//U3D_PHYA_RX_MON0
++#define RGS_SSUSB_EQ_DCLEQ_OFST                   (24)
++#define RGS_SSUSB_EQ_DCD0H_OFST                   (16)
++#define RGS_SSUSB_EQ_DCD0L_OFST                   (8)
++#define RGS_SSUSB_EQ_DCD1H_OFST                   (0)
++
++//U3D_PHYA_RX_MON1
++#define RGS_SSUSB_EQ_DCD1L_OFST                   (24)
++#define RGS_SSUSB_EQ_DCE0_OFST                    (16)
++#define RGS_SSUSB_EQ_DCE1_OFST                    (8)
++#define RGS_SSUSB_EQ_DCHHL_OFST                   (0)
++
++//U3D_PHYA_RX_MON2
++#define RGS_SSUSB_EQ_LEQ_STOP_OFST                (31)
++#define RGS_SSUSB_EQ_DCLHL_OFST                   (24)
++#define RGS_SSUSB_EQ_STATUS_OFST                  (16)
++#define RGS_SSUSB_EQ_DCEYE0_OFST                  (8)
++#define RGS_SSUSB_EQ_DCEYE1_OFST                  (0)
++
++//U3D_PHYA_RX_MON3
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST    (0)
++
++//U3D_PHYA_RX_MON4
++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST    (0)
++
++//U3D_PHYA_RX_MON5
++#define RGS_SSUSB_EQ_DCLEQOS_OFST                 (8)
++#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST             (7)
++#define RGS_SSUSB_EQ_PILPO_OFST                   (0)
++
++//U3D_PHYD_CPPAT2
++#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST            (16)
++#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST            (8)
++#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST            (0)
++
++//U3D_EQ_EYE3
++#define RG_SSUSB_EQ_LEQ_SHIFT_OFST                (24)
++#define RG_SSUSB_EQ_EYE_CNT_OFST                  (0)
++
++//U3D_KBAND_OUT
++#define RGS_SSUSB_CDR_BAND_5G_OFST                (24)
++#define RGS_SSUSB_CDR_BAND_2P5G_OFST              (16)
++#define RGS_SSUSB_PLL_BAND_5G_OFST                (8)
++#define RGS_SSUSB_PLL_BAND_2P5G_OFST              (0)
++
++//U3D_KBAND_OUT1
++#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST            (24)
++#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST           (16)
++#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST            (8)
++#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST           (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct u3phyd_bank2_reg {
++	//0x0
++	PHY_LE32 b2_phyd_top1;
++	PHY_LE32 b2_phyd_top2;
++	PHY_LE32 b2_phyd_top3;
++	PHY_LE32 b2_phyd_top4;
++	//0x10
++	PHY_LE32 b2_phyd_top5;
++	PHY_LE32 b2_phyd_top6;
++	PHY_LE32 b2_phyd_top7;
++	PHY_LE32 b2_phyd_p_sigdet1;
++	//0x20
++	PHY_LE32 b2_phyd_p_sigdet2;
++	PHY_LE32 b2_phyd_p_sigdet_cal1;
++	PHY_LE32 b2_phyd_rxdet1;
++	PHY_LE32 b2_phyd_rxdet2;
++	//0x30
++	PHY_LE32 b2_phyd_misc0;
++	PHY_LE32 b2_phyd_misc2;
++	PHY_LE32 b2_phyd_misc3;
++	PHY_LE32 reserve0;
++	//0x40
++	PHY_LE32 b2_rosc_0;
++	PHY_LE32 b2_rosc_1;
++	PHY_LE32 b2_rosc_2;
++	PHY_LE32 b2_rosc_3;
++	//0x50
++	PHY_LE32 b2_rosc_4;
++	PHY_LE32 b2_rosc_5;
++	PHY_LE32 b2_rosc_6;
++	PHY_LE32 b2_rosc_7;
++	//0x60
++	PHY_LE32 b2_rosc_8;
++	PHY_LE32 b2_rosc_9;
++	PHY_LE32 b2_rosc_a;
++	PHY_LE32 reserve1;
++	//0x70~0xd0
++	PHY_LE32 reserve2[28];
++	//0xe0
++	PHY_LE32 phyd_version;
++	PHY_LE32 phyd_model;
++};
++
++//U3D_B2_PHYD_TOP1
++#define RG_SSUSB_PCIE2_K_EMP                      (0xf<<28) //31:28
++#define RG_SSUSB_PCIE2_K_FUL                      (0xf<<24) //27:24
++#define RG_SSUSB_TX_EIDLE_LP_EN                   (0x1<<17) //17:17
++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN             (0x1<<16) //16:16
++#define RG_SSUSB_SIGDET_EN                        (0x1<<15) //15:15
++#define RG_SSUSB_FORCE_SIGDET_EN                  (0x1<<14) //14:14
++#define RG_SSUSB_CLKRX_EN                         (0x1<<13) //13:13
++#define RG_SSUSB_FORCE_CLKRX_EN                   (0x1<<12) //12:12
++#define RG_SSUSB_CLKTX_EN                         (0x1<<11) //11:11
++#define RG_SSUSB_FORCE_CLKTX_EN                   (0x1<<10) //10:10
++#define RG_SSUSB_CLK_REQ_N_I                      (0x1<<9) //9:9
++#define RG_SSUSB_FORCE_CLK_REQ_N_I                (0x1<<8) //8:8
++#define RG_SSUSB_RATE                             (0x1<<6) //6:6
++#define RG_SSUSB_FORCE_RATE                       (0x1<<5) //5:5
++#define RG_SSUSB_PCIE_MODE_SEL                    (0x1<<4) //4:4
++#define RG_SSUSB_FORCE_PCIE_MODE_SEL              (0x1<<3) //3:3
++#define RG_SSUSB_PHY_MODE                         (0x3<<1) //2:1
++#define RG_SSUSB_FORCE_PHY_MODE                   (0x1<<0) //0:0
++
++//U3D_B2_PHYD_TOP2
++#define RG_SSUSB_FORCE_IDRV_6DB                   (0x1<<30) //30:30
++#define RG_SSUSB_IDRV_6DB                         (0x3f<<24) //29:24
++#define RG_SSUSB_FORCE_IDEM_3P5DB                 (0x1<<22) //22:22
++#define RG_SSUSB_IDEM_3P5DB                       (0x3f<<16) //21:16
++#define RG_SSUSB_FORCE_IDRV_3P5DB                 (0x1<<14) //14:14
++#define RG_SSUSB_IDRV_3P5DB                       (0x3f<<8) //13:8
++#define RG_SSUSB_FORCE_IDRV_0DB                   (0x1<<6) //6:6
++#define RG_SSUSB_IDRV_0DB                         (0x3f<<0) //5:0
++
++//U3D_B2_PHYD_TOP3
++#define RG_SSUSB_TX_BIASI                         (0x7<<25) //27:25
++#define RG_SSUSB_FORCE_TX_BIASI_EN                (0x1<<24) //24:24
++#define RG_SSUSB_TX_BIASI_EN                      (0x1<<16) //16:16
++#define RG_SSUSB_FORCE_TX_BIASI                   (0x1<<13) //13:13
++#define RG_SSUSB_FORCE_IDEM_6DB                   (0x1<<8) //8:8
++#define RG_SSUSB_IDEM_6DB                         (0x3f<<0) //5:0
++
++//U3D_B2_PHYD_TOP4
++#define RG_SSUSB_G1_CDR_BIC_LTR                   (0xf<<28) //31:28
++#define RG_SSUSB_G1_CDR_BIC_LTD0                  (0xf<<24) //27:24
++#define RG_SSUSB_G1_CDR_BC_LTD1                   (0x1f<<16) //20:16
++#define RG_SSUSB_G1_CDR_BC_LTR                    (0x1f<<8) //12:8
++#define RG_SSUSB_G1_CDR_BC_LTD0                   (0x1f<<0) //4:0
++
++//U3D_B2_PHYD_TOP5
++#define RG_SSUSB_G1_CDR_BIR_LTD1                  (0x1f<<24) //28:24
++#define RG_SSUSB_G1_CDR_BIR_LTR                   (0x1f<<16) //20:16
++#define RG_SSUSB_G1_CDR_BIR_LTD0                  (0x1f<<8) //12:8
++#define RG_SSUSB_G1_CDR_BIC_LTD1                  (0xf<<0) //3:0
++
++//U3D_B2_PHYD_TOP6
++#define RG_SSUSB_G2_CDR_BIC_LTR                   (0xf<<28) //31:28
++#define RG_SSUSB_G2_CDR_BIC_LTD0                  (0xf<<24) //27:24
++#define RG_SSUSB_G2_CDR_BC_LTD1                   (0x1f<<16) //20:16
++#define RG_SSUSB_G2_CDR_BC_LTR                    (0x1f<<8) //12:8
++#define RG_SSUSB_G2_CDR_BC_LTD0                   (0x1f<<0) //4:0
++
++//U3D_B2_PHYD_TOP7
++#define RG_SSUSB_G2_CDR_BIR_LTD1                  (0x1f<<24) //28:24
++#define RG_SSUSB_G2_CDR_BIR_LTR                   (0x1f<<16) //20:16
++#define RG_SSUSB_G2_CDR_BIR_LTD0                  (0x1f<<8) //12:8
++#define RG_SSUSB_G2_CDR_BIC_LTD1                  (0xf<<0) //3:0
++
++//U3D_B2_PHYD_P_SIGDET1
++#define RG_SSUSB_P_SIGDET_FLT_DIS                 (0x1<<31) //31:31
++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL        (0x7f<<24) //30:24
++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL        (0x7f<<16) //22:16
++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL          (0x7f<<8) //14:8
++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL          (0x7f<<0) //6:0
++
++//U3D_B2_PHYD_P_SIGDET2
++#define RG_SSUSB_P_SIGDET_RX_VAL_S                (0x1<<29) //29:29
++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL            (0x1<<28) //28:28
++#define RG_SSUSB_P_SIGDET_L0_EXIT_S               (0x1<<27) //27:27
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S            (0x3<<25) //26:25
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S              (0x1<<24) //24:24
++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S             (0x1<<16) //16:16
++#define RG_SSUSB_P_SIGDET_PRB_SEL                 (0x1<<10) //10:10
++#define RG_SSUSB_P_SIGDET_BK_SIG_T                (0x3<<8) //9:8
++#define RG_SSUSB_P_SIGDET_P2_RXLFPS               (0x1<<6) //6:6
++#define RG_SSUSB_P_SIGDET_NON_BK_AD               (0x1<<5) //5:5
++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ               (0x1<<4) //4:4
++#define RG_SSUSB_P_SIGDET_G2_KO_SEL               (0x3<<2) //3:2
++#define RG_SSUSB_P_SIGDET_G1_KO_SEL               (0x3<<0) //1:0
++
++//U3D_B2_PHYD_P_SIGDET_CAL1
++#define RG_SSUSB_P_SIGDET_CAL_OFFSET              (0x1f<<24) //28:24
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET        (0x1<<16) //16:16
++#define RG_SSUSB_P_SIGDET_CAL_EN                  (0x1<<8) //8:8
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN            (0x1<<3) //3:3
++#define RG_SSUSB_P_SIGDET_FLT_EN                  (0x1<<2) //2:2
++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD              (0x1<<1) //1:1
++#define RG_SSUSB_P_SIGDET_REK                     (0x1<<0) //0:0
++
++//U3D_B2_PHYD_RXDET1
++#define RG_SSUSB_RXDET_PRB_SEL                    (0x1<<31) //31:31
++#define RG_SSUSB_FORCE_CMDET                      (0x1<<30) //30:30
++#define RG_SSUSB_RXDET_EN                         (0x1<<29) //29:29
++#define RG_SSUSB_FORCE_RXDET_EN                   (0x1<<28) //28:28
++#define RG_SSUSB_RXDET_K_TWICE                    (0x1<<27) //27:27
++#define RG_SSUSB_RXDET_STB3_SET                   (0x1ff<<18) //26:18
++#define RG_SSUSB_RXDET_STB2_SET                   (0x1ff<<9) //17:9
++#define RG_SSUSB_RXDET_STB1_SET                   (0x1ff<<0) //8:0
++
++//U3D_B2_PHYD_RXDET2
++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN         (0x1<<31) //31:31
++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN           (0x1<<30) //30:30
++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN            (0x1<<29) //29:29
++#define RG_SSUSB_PDN_T_SEL                        (0x3<<18) //19:18
++#define RG_SSUSB_RXDET_STB3_SET_P3                (0x1ff<<9) //17:9
++#define RG_SSUSB_RXDET_STB2_SET_P3                (0x1ff<<0) //8:0
++
++//U3D_B2_PHYD_MISC0
++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN              (0x1<<22) //22:22
++#define RG_SSUSB_PLL_DDS_HF_EN_MAN                (0x1<<21) //21:21
++#define RG_SSUSB_RXLFPS_ENTXDRV                   (0x1<<20) //20:20
++#define RG_SSUSB_RX_FL_UNLOCKTH                   (0xf<<16) //19:16
++#define RG_SSUSB_LFPS_PSEL                        (0x1<<15) //15:15
++#define RG_SSUSB_RX_SIGDET_EN                     (0x1<<14) //14:14
++#define RG_SSUSB_RX_SIGDET_EN_SEL                 (0x1<<13) //13:13
++#define RG_SSUSB_RX_PI_CAL_EN                     (0x1<<12) //12:12
++#define RG_SSUSB_RX_PI_CAL_EN_SEL                 (0x1<<11) //11:11
++#define RG_SSUSB_P3_CLS_CK_SEL                    (0x1<<10) //10:10
++#define RG_SSUSB_T2RLB_PSEL                       (0x3<<8) //9:8
++#define RG_SSUSB_PPCTL_PSEL                       (0x7<<5) //7:5
++#define RG_SSUSB_PHYD_TX_DATA_INV                 (0x1<<4) //4:4
++#define RG_SSUSB_BERTLB_PSEL                      (0x3<<2) //3:2
++#define RG_SSUSB_RETRACK_DIS                      (0x1<<1) //1:1
++#define RG_SSUSB_PPERRCNT_CLR                     (0x1<<0) //0:0
++
++//U3D_B2_PHYD_MISC2
++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2              (0x1<<31) //31:31
++#define RG_SSUSB_FRC_PLL_DDS_IADJ                 (0xf<<27) //30:27
++#define RG_SSUSB_P_SIGDET_125FILTER               (0x1<<26) //26:26
++#define RG_SSUSB_P_SIGDET_RST_FILTER              (0x1<<25) //25:25
++#define RG_SSUSB_P_SIGDET_EID_USE_RAW             (0x1<<24) //24:24
++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW             (0x1<<23) //23:23
++#define RG_SSUSB_EIDLE_BF_RXDET                   (0x1<<22) //22:22
++#define RG_SSUSB_EIDLE_LP_STBCYC                  (0x1ff<<13) //21:13
++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY              (0x3f<<7) //12:7
++#define RG_SSUSB_TX_EIDLE_LP_PREDLY               (0x3f<<1) //6:1
++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV               (0x1<<0) //0:0
++
++//U3D_B2_PHYD_MISC3
++#define RGS_SSUSB_DDS_CALIB_C_STATE               (0x7<<16) //18:16
++#define RGS_SSUSB_PPERRCNT                        (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_0
++#define RG_SSUSB_RING_OSC_CNTEND                  (0x1ff<<23) //31:23
++#define RG_SSUSB_XTAL_OSC_CNTEND                  (0x7f<<16) //22:16
++#define RG_SSUSB_RING_OSC_EN                      (0x1<<3) //3:3
++#define RG_SSUSB_RING_OSC_FORCE_EN                (0x1<<2) //2:2
++#define RG_SSUSB_FRC_RING_BYPASS_DET              (0x1<<1) //1:1
++#define RG_SSUSB_RING_BYPASS_DET                  (0x1<<0) //0:0
++
++//U3D_B2_ROSC_1
++#define RG_SSUSB_RING_OSC_FRC_P3                  (0x1<<20) //20:20
++#define RG_SSUSB_RING_OSC_P3                      (0x1<<19) //19:19
++#define RG_SSUSB_RING_OSC_FRC_RECAL               (0x3<<17) //18:17
++#define RG_SSUSB_RING_OSC_RECAL                   (0x1<<16) //16:16
++#define RG_SSUSB_RING_OSC_SEL                     (0xff<<8) //15:8
++#define RG_SSUSB_RING_OSC_FRC_SEL                 (0x1<<0) //0:0
++
++//U3D_B2_ROSC_2
++#define RG_SSUSB_RING_DET_STRCYC2                 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_STRCYC1                 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_3
++#define RG_SSUSB_RING_DET_DETWIN1                 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_STRCYC3                 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_4
++#define RG_SSUSB_RING_DET_DETWIN3                 (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_DETWIN2                 (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_5
++#define RG_SSUSB_RING_DET_LBOND1                  (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_UBOND1                  (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_6
++#define RG_SSUSB_RING_DET_LBOND2                  (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_UBOND2                  (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_7
++#define RG_SSUSB_RING_DET_LBOND3                  (0xffff<<16) //31:16
++#define RG_SSUSB_RING_DET_UBOND3                  (0xffff<<0) //15:0
++
++//U3D_B2_ROSC_8
++#define RG_SSUSB_RING_RESERVE                     (0xffff<<16) //31:16
++#define RG_SSUSB_ROSC_PROB_SEL                    (0xf<<2) //5:2
++#define RG_SSUSB_RING_FREQMETER_EN                (0x1<<1) //1:1
++#define RG_SSUSB_RING_DET_BPS_UBOND               (0x1<<0) //0:0
++
++//U3D_B2_ROSC_9
++#define RGS_FM_RING_CNT                           (0xffff<<16) //31:16
++#define RGS_SSUSB_RING_OSC_STATE                  (0x3<<10) //11:10
++#define RGS_SSUSB_RING_OSC_STABLE                 (0x1<<9) //9:9
++#define RGS_SSUSB_RING_OSC_CAL_FAIL               (0x1<<8) //8:8
++#define RGS_SSUSB_RING_OSC_CAL                    (0xff<<0) //7:0
++
++//U3D_B2_ROSC_A
++#define RGS_SSUSB_ROSC_PROB_OUT                   (0xff<<0) //7:0
++
++//U3D_PHYD_VERSION
++#define RGS_SSUSB_PHYD_VERSION                    (0xffffffff<<0) //31:0
++
++//U3D_PHYD_MODEL
++#define RGS_SSUSB_PHYD_MODEL                      (0xffffffff<<0) //31:0
++
++
++/* OFFSET */
++
++//U3D_B2_PHYD_TOP1
++#define RG_SSUSB_PCIE2_K_EMP_OFST                 (28)
++#define RG_SSUSB_PCIE2_K_FUL_OFST                 (24)
++#define RG_SSUSB_TX_EIDLE_LP_EN_OFST              (17)
++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST        (16)
++#define RG_SSUSB_SIGDET_EN_OFST                   (15)
++#define RG_SSUSB_FORCE_SIGDET_EN_OFST             (14)
++#define RG_SSUSB_CLKRX_EN_OFST                    (13)
++#define RG_SSUSB_FORCE_CLKRX_EN_OFST              (12)
++#define RG_SSUSB_CLKTX_EN_OFST                    (11)
++#define RG_SSUSB_FORCE_CLKTX_EN_OFST              (10)
++#define RG_SSUSB_CLK_REQ_N_I_OFST                 (9)
++#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST           (8)
++#define RG_SSUSB_RATE_OFST                        (6)
++#define RG_SSUSB_FORCE_RATE_OFST                  (5)
++#define RG_SSUSB_PCIE_MODE_SEL_OFST               (4)
++#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST         (3)
++#define RG_SSUSB_PHY_MODE_OFST                    (1)
++#define RG_SSUSB_FORCE_PHY_MODE_OFST              (0)
++
++//U3D_B2_PHYD_TOP2
++#define RG_SSUSB_FORCE_IDRV_6DB_OFST              (30)
++#define RG_SSUSB_IDRV_6DB_OFST                    (24)
++#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST            (22)
++#define RG_SSUSB_IDEM_3P5DB_OFST                  (16)
++#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST            (14)
++#define RG_SSUSB_IDRV_3P5DB_OFST                  (8)
++#define RG_SSUSB_FORCE_IDRV_0DB_OFST              (6)
++#define RG_SSUSB_IDRV_0DB_OFST                    (0)
++
++//U3D_B2_PHYD_TOP3
++#define RG_SSUSB_TX_BIASI_OFST                    (25)
++#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST           (24)
++#define RG_SSUSB_TX_BIASI_EN_OFST                 (16)
++#define RG_SSUSB_FORCE_TX_BIASI_OFST              (13)
++#define RG_SSUSB_FORCE_IDEM_6DB_OFST              (8)
++#define RG_SSUSB_IDEM_6DB_OFST                    (0)
++
++//U3D_B2_PHYD_TOP4
++#define RG_SSUSB_G1_CDR_BIC_LTR_OFST              (28)
++#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST             (24)
++#define RG_SSUSB_G1_CDR_BC_LTD1_OFST              (16)
++#define RG_SSUSB_G1_CDR_BC_LTR_OFST               (8)
++#define RG_SSUSB_G1_CDR_BC_LTD0_OFST              (0)
++
++//U3D_B2_PHYD_TOP5
++#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST             (24)
++#define RG_SSUSB_G1_CDR_BIR_LTR_OFST              (16)
++#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST             (8)
++#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST             (0)
++
++//U3D_B2_PHYD_TOP6
++#define RG_SSUSB_G2_CDR_BIC_LTR_OFST              (28)
++#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST             (24)
++#define RG_SSUSB_G2_CDR_BC_LTD1_OFST              (16)
++#define RG_SSUSB_G2_CDR_BC_LTR_OFST               (8)
++#define RG_SSUSB_G2_CDR_BC_LTD0_OFST              (0)
++
++//U3D_B2_PHYD_TOP7
++#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST             (24)
++#define RG_SSUSB_G2_CDR_BIR_LTR_OFST              (16)
++#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST             (8)
++#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST             (0)
++
++//U3D_B2_PHYD_P_SIGDET1
++#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST            (31)
++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST   (24)
++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST   (16)
++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST     (8)
++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST     (0)
++
++//U3D_B2_PHYD_P_SIGDET2
++#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST           (29)
++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST       (28)
++#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST          (27)
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST       (25)
++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST         (24)
++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST        (16)
++#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST            (10)
++#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST           (8)
++#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST          (6)
++#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST          (5)
++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST          (4)
++#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST          (2)
++#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST          (0)
++
++//U3D_B2_PHYD_P_SIGDET_CAL1
++#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST         (24)
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST   (16)
++#define RG_SSUSB_P_SIGDET_CAL_EN_OFST             (8)
++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST       (3)
++#define RG_SSUSB_P_SIGDET_FLT_EN_OFST             (2)
++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST         (1)
++#define RG_SSUSB_P_SIGDET_REK_OFST                (0)
++
++//U3D_B2_PHYD_RXDET1
++#define RG_SSUSB_RXDET_PRB_SEL_OFST               (31)
++#define RG_SSUSB_FORCE_CMDET_OFST                 (30)
++#define RG_SSUSB_RXDET_EN_OFST                    (29)
++#define RG_SSUSB_FORCE_RXDET_EN_OFST              (28)
++#define RG_SSUSB_RXDET_K_TWICE_OFST               (27)
++#define RG_SSUSB_RXDET_STB3_SET_OFST              (18)
++#define RG_SSUSB_RXDET_STB2_SET_OFST              (9)
++#define RG_SSUSB_RXDET_STB1_SET_OFST              (0)
++
++//U3D_B2_PHYD_RXDET2
++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST    (31)
++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST      (30)
++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST       (29)
++#define RG_SSUSB_PDN_T_SEL_OFST                   (18)
++#define RG_SSUSB_RXDET_STB3_SET_P3_OFST           (9)
++#define RG_SSUSB_RXDET_STB2_SET_P3_OFST           (0)
++
++//U3D_B2_PHYD_MISC0
++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST         (22)
++#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST           (21)
++#define RG_SSUSB_RXLFPS_ENTXDRV_OFST              (20)
++#define RG_SSUSB_RX_FL_UNLOCKTH_OFST              (16)
++#define RG_SSUSB_LFPS_PSEL_OFST                   (15)
++#define RG_SSUSB_RX_SIGDET_EN_OFST                (14)
++#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST            (13)
++#define RG_SSUSB_RX_PI_CAL_EN_OFST                (12)
++#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST            (11)
++#define RG_SSUSB_P3_CLS_CK_SEL_OFST               (10)
++#define RG_SSUSB_T2RLB_PSEL_OFST                  (8)
++#define RG_SSUSB_PPCTL_PSEL_OFST                  (5)
++#define RG_SSUSB_PHYD_TX_DATA_INV_OFST            (4)
++#define RG_SSUSB_BERTLB_PSEL_OFST                 (2)
++#define RG_SSUSB_RETRACK_DIS_OFST                 (1)
++#define RG_SSUSB_PPERRCNT_CLR_OFST                (0)
++
++//U3D_B2_PHYD_MISC2
++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST         (31)
++#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST            (27)
++#define RG_SSUSB_P_SIGDET_125FILTER_OFST          (26)
++#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST         (25)
++#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST        (24)
++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST        (23)
++#define RG_SSUSB_EIDLE_BF_RXDET_OFST              (22)
++#define RG_SSUSB_EIDLE_LP_STBCYC_OFST             (13)
++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST         (7)
++#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST          (1)
++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST          (0)
++
++//U3D_B2_PHYD_MISC3
++#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST          (16)
++#define RGS_SSUSB_PPERRCNT_OFST                   (0)
++
++//U3D_B2_ROSC_0
++#define RG_SSUSB_RING_OSC_CNTEND_OFST             (23)
++#define RG_SSUSB_XTAL_OSC_CNTEND_OFST             (16)
++#define RG_SSUSB_RING_OSC_EN_OFST                 (3)
++#define RG_SSUSB_RING_OSC_FORCE_EN_OFST           (2)
++#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST         (1)
++#define RG_SSUSB_RING_BYPASS_DET_OFST             (0)
++
++//U3D_B2_ROSC_1
++#define RG_SSUSB_RING_OSC_FRC_P3_OFST             (20)
++#define RG_SSUSB_RING_OSC_P3_OFST                 (19)
++#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST          (17)
++#define RG_SSUSB_RING_OSC_RECAL_OFST              (16)
++#define RG_SSUSB_RING_OSC_SEL_OFST                (8)
++#define RG_SSUSB_RING_OSC_FRC_SEL_OFST            (0)
++
++//U3D_B2_ROSC_2
++#define RG_SSUSB_RING_DET_STRCYC2_OFST            (16)
++#define RG_SSUSB_RING_DET_STRCYC1_OFST            (0)
++
++//U3D_B2_ROSC_3
++#define RG_SSUSB_RING_DET_DETWIN1_OFST            (16)
++#define RG_SSUSB_RING_DET_STRCYC3_OFST            (0)
++
++//U3D_B2_ROSC_4
++#define RG_SSUSB_RING_DET_DETWIN3_OFST            (16)
++#define RG_SSUSB_RING_DET_DETWIN2_OFST            (0)
++
++//U3D_B2_ROSC_5
++#define RG_SSUSB_RING_DET_LBOND1_OFST             (16)
++#define RG_SSUSB_RING_DET_UBOND1_OFST             (0)
++
++//U3D_B2_ROSC_6
++#define RG_SSUSB_RING_DET_LBOND2_OFST             (16)
++#define RG_SSUSB_RING_DET_UBOND2_OFST             (0)
++
++//U3D_B2_ROSC_7
++#define RG_SSUSB_RING_DET_LBOND3_OFST             (16)
++#define RG_SSUSB_RING_DET_UBOND3_OFST             (0)
++
++//U3D_B2_ROSC_8
++#define RG_SSUSB_RING_RESERVE_OFST                (16)
++#define RG_SSUSB_ROSC_PROB_SEL_OFST               (2)
++#define RG_SSUSB_RING_FREQMETER_EN_OFST           (1)
++#define RG_SSUSB_RING_DET_BPS_UBOND_OFST          (0)
++
++//U3D_B2_ROSC_9
++#define RGS_FM_RING_CNT_OFST                      (16)
++#define RGS_SSUSB_RING_OSC_STATE_OFST             (10)
++#define RGS_SSUSB_RING_OSC_STABLE_OFST            (9)
++#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST          (8)
++#define RGS_SSUSB_RING_OSC_CAL_OFST               (0)
++
++//U3D_B2_ROSC_A
++#define RGS_SSUSB_ROSC_PROB_OUT_OFST              (0)
++
++//U3D_PHYD_VERSION
++#define RGS_SSUSB_PHYD_VERSION_OFST               (0)
++
++//U3D_PHYD_MODEL
++#define RGS_SSUSB_PHYD_MODEL_OFST                 (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct sifslv_chip_reg {
++	PHY_LE32 xtalbias;
++	PHY_LE32 syspll1;
++	PHY_LE32 gpio_ctla;
++	PHY_LE32 gpio_ctlb;
++	PHY_LE32 gpio_ctlc;
++};
++
++//U3D_GPIO_CTLA
++#define RG_C60802_GPIO_CTLA                       (0xffffffff<<0) //31:0
++
++//U3D_GPIO_CTLB
++#define RG_C60802_GPIO_CTLB                       (0xffffffff<<0) //31:0
++
++//U3D_GPIO_CTLC
++#define RG_C60802_GPIO_CTLC                       (0xffffffff<<0) //31:0
++
++/* OFFSET */
++
++//U3D_GPIO_CTLA
++#define RG_C60802_GPIO_CTLA_OFST                  (0)
++
++//U3D_GPIO_CTLB
++#define RG_C60802_GPIO_CTLB_OFST                  (0)
++
++//U3D_GPIO_CTLC
++#define RG_C60802_GPIO_CTLC_OFST                  (0)
++
++///////////////////////////////////////////////////////////////////////////////
++
++struct sifslv_fm_feg {
++	//0x0
++	PHY_LE32 fmcr0;
++	PHY_LE32 fmcr1;
++	PHY_LE32 fmcr2;
++	PHY_LE32 fmmonr0;
++	//0x10
++	PHY_LE32 fmmonr1;
++};
++
++//U3D_FMCR0
++#define RG_LOCKTH                                 (0xf<<28) //31:28
++#define RG_MONCLK_SEL                             (0x3<<26) //27:26
++#define RG_FM_MODE                                (0x1<<25) //25:25
++#define RG_FREQDET_EN                             (0x1<<24) //24:24
++#define RG_CYCLECNT                               (0xffffff<<0) //23:0
++
++//U3D_FMCR1
++#define RG_TARGET                                 (0xffffffff<<0) //31:0
++
++//U3D_FMCR2
++#define RG_OFFSET                                 (0xffffffff<<0) //31:0
++
++//U3D_FMMONR0
++#define USB_FM_OUT                                (0xffffffff<<0) //31:0
++
++//U3D_FMMONR1
++#define RG_MONCLK_SEL_3                           (0x1<<9) //9:9
++#define RG_FRCK_EN                                (0x1<<8) //8:8
++#define USBPLL_LOCK                               (0x1<<1) //1:1
++#define USB_FM_VLD                                (0x1<<0) //0:0
++
++
++/* OFFSET */
++
++//U3D_FMCR0
++#define RG_LOCKTH_OFST                            (28)
++#define RG_MONCLK_SEL_OFST                        (26)
++#define RG_FM_MODE_OFST                           (25)
++#define RG_FREQDET_EN_OFST                        (24)
++#define RG_CYCLECNT_OFST                          (0)
++
++//U3D_FMCR1
++#define RG_TARGET_OFST                            (0)
++
++//U3D_FMCR2
++#define RG_OFFSET_OFST                            (0)
++
++//U3D_FMMONR0
++#define USB_FM_OUT_OFST                           (0)
++
++//U3D_FMMONR1
++#define RG_MONCLK_SEL_3_OFST                      (9)
++#define RG_FRCK_EN_OFST                           (8)
++#define USBPLL_LOCK_OFST                          (1)
++#define USB_FM_VLD_OFST                           (0)
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++PHY_INT32 phy_init(struct u3phy_info *info);
++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
++PHY_INT32 eyescan_init(struct u3phy_info *info);
++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
++		, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
++PHY_INT32 u2_save_cur_en(struct u3phy_info *info);
++PHY_INT32 u2_save_cur_re(struct u3phy_info *info);
++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info);
++
++#endif
++#endif
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy-ahb.c
+@@ -0,0 +1,58 @@
++#include "mtk-phy.h"
++#ifdef CONFIG_U3D_HAL_SUPPORT
++#include "mu3d_hal_osal.h"
++#endif
++
++#ifdef CONFIG_U3_PHY_AHB_SUPPORT
++#include <linux/gfp.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++
++#ifndef CONFIG_U3D_HAL_SUPPORT
++#define os_writel(addr,data) {\
++		(*((volatile PHY_UINT32*)(addr)) = data);\
++	}
++#define os_readl(addr)  *((volatile PHY_UINT32*)(addr))
++#define os_writelmsk(addr, data, msk) \
++		{ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \
++	}
++#define os_setmsk(addr, msk) \
++	{ os_writel(addr, os_readl(addr) | msk); \
++	}
++#define os_clrmsk(addr, msk) \
++   { os_writel(addr, os_readl(addr) &~ msk); \
++   }
++/*msk the data first, then umsk with the umsk.*/
++#define os_writelmskumsk(addr, data, msk, umsk) \
++{\
++   os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\
++}
++
++#endif
++
++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data)
++{
++	os_writel(addr, data);
++
++	return 0;
++}
++
++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr)
++{
++	return os_readl(addr);
++}
++
++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data)
++{
++	os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8));
++	
++	return 0;
++}
++
++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr)
++{
++	return ((os_readl(addr)>>((addr%4)*8))&0xff);
++}
++
++#endif
++
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy.c
+@@ -0,0 +1,102 @@
++#include <linux/gfp.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#define U3_PHY_LIB
++#include "mtk-phy.h"
++#ifdef CONFIG_PROJECT_7621
++#include "mtk-phy-7621.h"
++#endif
++#ifdef CONFIG_PROJECT_PHY
++static struct u3phy_operator project_operators = {
++	.init = phy_init,
++	.change_pipe_phase = phy_change_pipe_phase,
++	.eyescan_init = eyescan_init,
++	.eyescan = phy_eyescan,
++	.u2_slew_rate_calibration = u2_slew_rate_calibration,
++};
++#endif
++
++
++PHY_INT32 u3phy_init(){
++#ifndef CONFIG_PROJECT_PHY
++	PHY_INT32 u3phy_version;
++#endif
++	
++	if(u3phy != NULL){
++		return PHY_TRUE;
++	}
++
++	u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
++#endif
++#ifdef CONFIG_U3_PHY_GPIO_SUPPORT
++	u3phy->phyd_version_addr = 0x2000e4;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	u3phy_p1->phyd_version_addr = 0x2000e4;
++#endif
++#else
++	u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4;
++#endif
++#endif
++
++#ifdef CONFIG_PROJECT_PHY
++
++	u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE;
++	u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE;
++	u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE;
++	u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE;
++	u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE;
++	u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;		
++	u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;	
++	u3phy_ops = &project_operators;
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1;
++	u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1;
++	u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1;
++	u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1;
++	u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1;
++	u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
++	u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
++#endif
++#endif
++
++	return PHY_TRUE;
++}
++
++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
++	PHY_INT8 cur_value;
++	PHY_INT8 new_value;
++
++	cur_value = U3PhyReadReg8(addr);
++	new_value = (cur_value & (~mask)) | (value << offset);
++	//udelay(i2cdelayus);
++	U3PhyWriteReg8(addr, new_value);
++	return PHY_TRUE;
++}
++
++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
++	PHY_INT32 cur_value;
++	PHY_INT32 new_value;
++
++	cur_value = U3PhyReadReg32(addr);
++	new_value = (cur_value & (~mask)) | ((value << offset) & mask);
++	U3PhyWriteReg32(addr, new_value);
++	//DRV_MDELAY(100);
++
++	return PHY_TRUE;
++}
++
++PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){
++	
++	return ((U3PhyReadReg8(addr) & mask) >> offset);
++}
++
++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){
++
++	return ((U3PhyReadReg32(addr) & mask) >> offset);
++}
++
+--- /dev/null
++++ b/drivers/usb/host/mtk-phy.h
+@@ -0,0 +1,179 @@
++#ifndef __MTK_PHY_NEW_H
++#define __MTK_PHY_NEW_H
++
++//#define CONFIG_U3D_HAL_SUPPORT
++
++/* include system library */
++#include <linux/gfp.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++
++/* Choose PHY R/W implementation */
++//#define CONFIG_U3_PHY_GPIO_SUPPORT	//SW I2C implemented by GPIO
++#define CONFIG_U3_PHY_AHB_SUPPORT	//AHB, only on SoC
++
++/* Choose PHY version */
++//Select your project by defining one of the followings
++#define CONFIG_PROJECT_7621 //7621
++#define CONFIG_PROJECT_PHY
++
++/* BASE ADDRESS DEFINE, should define this on ASIC */
++#define PHY_BASE		0xBE1D0000
++#define SIFSLV_FM_FEG_BASE	(PHY_BASE+0x100)
++#define SIFSLV_CHIP_BASE	(PHY_BASE+0x700)
++#define U2_PHY_BASE		(PHY_BASE+0x800)
++#define U3_PHYD_BASE		(PHY_BASE+0x900)
++#define U3_PHYD_B2_BASE		(PHY_BASE+0xa00)
++#define U3_PHYA_BASE		(PHY_BASE+0xb00)
++#define U3_PHYA_DA_BASE		(PHY_BASE+0xc00)
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#define SIFSLV_FM_FEG_BASE_P1	(PHY_BASE+0x100)
++#define SIFSLV_CHIP_BASE_P1	(PHY_BASE+0x700)
++#define U2_PHY_BASE_P1		(PHY_BASE+0x1000)
++#define U3_PHYD_BASE_P1		(PHY_BASE+0x1100)
++#define U3_PHYD_B2_BASE_P1	(PHY_BASE+0x1200)
++#define U3_PHYA_BASE_P1		(PHY_BASE+0x1300)
++#define U3_PHYA_DA_BASE_P1	(PHY_BASE+0x1400)
++#endif
++
++/*
++
++0x00000100	MODULE	ssusb_sifslv_fmreg	ssusb_sifslv_fmreg
++0x00000700	MODULE	ssusb_sifslv_ippc	ssusb_sifslv_ippc
++0x00000800	MODULE	ssusb_sifslv_u2phy_com	ssusb_sifslv_u2_phy_com_T28
++0x00000900	MODULE	ssusb_sifslv_u3phyd	ssusb_sifslv_u3phyd_T28
++0x00000a00	MODULE	ssusb_sifslv_u3phyd_bank2	ssusb_sifslv_u3phyd_bank2_T28
++0x00000b00	MODULE	ssusb_sifslv_u3phya	ssusb_sifslv_u3phya_T28
++0x00000c00	MODULE	ssusb_sifslv_u3phya_da	ssusb_sifslv_u3phya_da_T28
++*/
++
++
++/* TYPE DEFINE */
++typedef unsigned int	PHY_UINT32;
++typedef int				PHY_INT32;
++typedef	unsigned short	PHY_UINT16;
++typedef short			PHY_INT16;
++typedef unsigned char	PHY_UINT8;
++typedef char			PHY_INT8;
++
++typedef PHY_UINT32 __bitwise	PHY_LE32;
++
++/* CONSTANT DEFINE */
++#define PHY_FALSE	0
++#define PHY_TRUE	1
++
++/* MACRO DEFINE */
++#define DRV_WriteReg32(addr,data)       ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data))
++#define DRV_Reg32(addr)                 (*(volatile PHY_UINT32 *)(addr))
++
++#define DRV_MDELAY	mdelay
++#define DRV_MSLEEP	msleep
++#define DRV_UDELAY	udelay
++#define DRV_USLEEP	usleep
++
++/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */
++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data);
++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr);
++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data);
++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr);
++
++/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */
++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
++PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
++
++struct u3phy_info {
++	PHY_INT32 phy_version;
++	PHY_INT32 phyd_version_addr;
++	
++#ifdef CONFIG_PROJECT_PHY	
++	struct u2phy_reg *u2phy_regs;
++	struct u3phya_reg *u3phya_regs;
++	struct u3phya_da_reg *u3phya_da_regs;
++	struct u3phyd_reg *u3phyd_regs;
++	struct u3phyd_bank2_reg *u3phyd_bank2_regs;
++	struct sifslv_chip_reg *sifslv_chip_regs;	
++	struct sifslv_fm_feg *sifslv_fm_regs;	
++#endif
++};
++
++struct u3phy_operator {
++	PHY_INT32 (*init) (struct u3phy_info *info);
++	PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
++	PHY_INT32 (*eyescan_init) (struct u3phy_info *info);
++	PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
++	PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info);
++	PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info);
++	PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info);
++};
++
++#ifdef U3_PHY_LIB
++#define AUTOEXT
++#else
++#define AUTOEXT extern
++#endif
++
++AUTOEXT struct u3phy_info *u3phy;
++AUTOEXT struct u3phy_info *u3phy_p1;
++AUTOEXT struct u3phy_operator *u3phy_ops;
++
++/*********eye scan required*********/
++
++#define LO_BYTE(x)                   ((PHY_UINT8)((x) & 0xFF))
++#define HI_BYTE(x)                   ((PHY_UINT8)(((x) & 0xFF00) >> 8))
++
++typedef enum
++{
++  SCAN_UP,
++  SCAN_DN
++} enumScanDir;
++
++struct strucScanRegion
++{
++  PHY_INT8 bX_tl;
++  PHY_INT8 bY_tl;
++  PHY_INT8 bX_br;
++  PHY_INT8 bY_br;
++  PHY_INT8 bDeltaX;
++  PHY_INT8 bDeltaY;
++};
++
++struct strucTestCycle
++{
++  PHY_UINT16 wEyeCnt;
++  PHY_INT8 bNumOfEyeCnt;
++  PHY_INT8 bPICalEn;
++  PHY_INT8 bNumOfIgnoreCnt;
++};
++
++#define ERRCNT_MAX		128
++#define CYCLE_COUNT_MAX	15
++
++/// the map resolution is 128 x 128 pts
++#define MAX_X                 127
++#define MAX_Y                 127
++#define MIN_X                 0
++#define MIN_Y                 0
++
++PHY_INT32 u3phy_init(void);
++
++AUTOEXT struct strucScanRegion           _rEye1;
++AUTOEXT struct strucScanRegion           _rEye2;
++AUTOEXT struct strucTestCycle            _rTestCycle;
++AUTOEXT PHY_UINT8                      _bXcurr;
++AUTOEXT PHY_UINT8                      _bYcurr;
++AUTOEXT enumScanDir               _eScanDir;
++AUTOEXT PHY_INT8                      _fgXChged;
++AUTOEXT PHY_INT8                      _bPIResult;
++/* use local variable instead to save memory use */
++#if 0
++AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
++#endif
++
++/***********************************/
++#endif
++
+--- a/drivers/usb/host/ohci-platform.c
++++ b/drivers/usb/host/ohci-platform.c
+@@ -27,7 +27,10 @@
+ #include <linux/reset.h>
+ #include <linux/usb/ohci_pdriver.h>
+ #include <linux/usb.h>
++#include <linux/usb/phy.h>
+ #include <linux/usb/hcd.h>
++#include <linux/dma-mapping.h>
++#include <linux/of.h>
+ 
+ #include "ohci.h"
+ 
+@@ -41,6 +44,7 @@ struct ohci_platform_priv {
+ 	struct phy *phy;
+ };
+ 
++static struct usb_ohci_pdata ohci_platform_defaults;
+ static const char hcd_name[] = "ohci-platform";
+ 
+ static int ohci_platform_reset(struct usb_hcd *hcd)
+@@ -239,6 +243,12 @@ static int ohci_platform_probe(struct platform_device *dev)
+ 	hcd->rsrc_start = res_mem->start;
+ 	hcd->rsrc_len = resource_size(res_mem);
+ 
++#ifdef CONFIG_USB_PHY
++	hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
++	if (!IS_ERR_OR_NULL(hcd->phy))
++		usb_phy_init(hcd->phy);
++#endif
++
+ 	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+ 	if (IS_ERR(hcd->regs)) {
+ 		err = PTR_ERR(hcd->regs);
+--- a/drivers/usb/host/pci-quirks.h
++++ b/drivers/usb/host/pci-quirks.h
+@@ -1,7 +1,7 @@
+ #ifndef __LINUX_USB_PCI_QUIRKS_H
+ #define __LINUX_USB_PCI_QUIRKS_H
+ 
+-#ifdef CONFIG_PCI
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+ #endif  /* CONFIG_PCI */
+--- a/drivers/usb/host/xhci-dbg.c
++++ b/drivers/usb/host/xhci-dbg.c
+@@ -21,6 +21,9 @@
+  */
+ 
+ #include "xhci.h"
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#include "xhci-mtk.h"
++#endif
+ 
+ #define XHCI_INIT_VALUE 0x0
+ 
+--- a/drivers/usb/host/xhci-mem.c
++++ b/drivers/usb/host/xhci-mem.c
+@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
+ 
+ static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
+ {
++	if (!seg)
++		return;
++
+ 	if (seg->trbs) {
+ 		dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
+ 		seg->trbs = NULL;
+@@ -1475,9 +1478,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
+ 			max_burst = (usb_endpoint_maxp(&ep->desc)
+ 				     & 0x1800) >> 11;
+ 		}
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++		if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
++		max_packet += 2;
++#endif
+ 		break;
+ 	case USB_SPEED_FULL:
+ 	case USB_SPEED_LOW:
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++		if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
++		max_packet += 2;
++#endif
+ 		break;
+ 	default:
+ 		BUG();
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-power.c
+@@ -0,0 +1,115 @@
++#include "xhci-mtk.h"
++#include "xhci-mtk-power.h"
++#include "xhci.h"
++#include <linux/kernel.h>       /* printk() */
++#include <linux/slab.h>
++#include <linux/delay.h>
++
++static int g_num_u3_port;
++static int g_num_u2_port;
++
++
++void enableXhciAllPortPower(struct xhci_hcd *xhci){
++	int i;
++	u32 port_id, temp;
++	u32 __iomem *addr;
++
++	g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
++	g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
++	
++	for(i=1; i<=g_num_u3_port; i++){
++		port_id=i;
++		addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
++		temp = readl(addr);
++		temp = xhci_port_state_to_neutral(temp);
++		temp |= PORT_POWER;
++		writel(temp, addr);
++	}
++	for(i=1; i<=g_num_u2_port; i++){
++		port_id=i+g_num_u3_port;
++		addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
++		temp = readl(addr);
++		temp = xhci_port_state_to_neutral(temp);
++		temp |= PORT_POWER;
++		writel(temp, addr);
++	}
++}
++
++void enableAllClockPower(){
++
++	int i;
++	u32 temp;
++
++	g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
++	g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
++
++	//2.	Enable xHC
++	writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
++	writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
++	writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
++	
++	//1.	Enable target ports 
++	for(i=0; i<g_num_u3_port; i++){
++		temp = readl(SSUSB_U3_CTRL(i));
++		temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS);
++		writel(temp, SSUSB_U3_CTRL(i));
++	}
++	for(i=0; i<g_num_u2_port; i++){
++		temp = readl(SSUSB_U2_CTRL(i));
++		temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS);
++		writel(temp, SSUSB_U2_CTRL(i));
++	}
++	msleep(100);
++}
++
++
++//(X)disable clock/power of a port 
++//(X)if all ports are disabled, disable IP ctrl power
++//disable all ports and IP clock/power, this is just mention HW that the power/clock of port 
++//and IP could be disable if suspended.
++//If doesn't not disable all ports at first, the IP clock/power will never be disabled
++//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time
++//port_index: port number
++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
++void disablePortClockPower(void){
++	int i;
++	u32 temp;
++
++	g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
++	g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
++	
++	for(i=0; i<g_num_u3_port; i++){
++		temp = readl(SSUSB_U3_CTRL(i));
++		temp = temp | (SSUSB_U3_PORT_PDN);
++		writel(temp, SSUSB_U3_CTRL(i));
++	}
++	for(i=0; i<g_num_u2_port; i++){
++		temp = readl(SSUSB_U2_CTRL(i));
++		temp = temp | (SSUSB_U2_PORT_PDN);
++		writel(temp, SSUSB_U2_CTRL(i));
++	}
++	writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
++}
++
++//if IP ctrl power is disabled, enable it
++//enable clock/power of a port
++//port_index: port number
++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
++void enablePortClockPower(int port_index, int port_rev){
++	int i;
++	u32 temp;
++	
++	writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
++
++	if(port_rev == 0x3){
++		temp = readl(SSUSB_U3_CTRL(port_index));
++		temp = temp & (~SSUSB_U3_PORT_PDN);
++		writel(temp, SSUSB_U3_CTRL(port_index));
++	}
++	else if(port_rev == 0x2){
++		temp = readl(SSUSB_U2_CTRL(port_index));
++		temp = temp & (~SSUSB_U2_PORT_PDN);
++		writel(temp, SSUSB_U2_CTRL(port_index));
++	}
++}
++
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-power.h
+@@ -0,0 +1,13 @@
++#ifndef _XHCI_MTK_POWER_H
++#define _XHCI_MTK_POWER_H
++
++#include <linux/usb.h>
++#include "xhci.h"
++#include "xhci-mtk.h"
++
++void enableXhciAllPortPower(struct xhci_hcd *xhci);
++void enableAllClockPower(void);
++void disablePortClockPower(void);
++void enablePortClockPower(int port_index, int port_rev);
++
++#endif
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-scheduler.c
+@@ -0,0 +1,608 @@
++#include "xhci-mtk-scheduler.h"
++#include <linux/kernel.h>       /* printk() */
++
++static struct sch_ep **ss_out_eps[MAX_EP_NUM];
++static struct sch_ep **ss_in_eps[MAX_EP_NUM];
++static struct sch_ep **hs_eps[MAX_EP_NUM];	//including tt isoc
++static struct sch_ep **tt_intr_eps[MAX_EP_NUM];
++
++
++int mtk_xhci_scheduler_init(void){
++	int i;
++
++	for(i=0; i<MAX_EP_NUM; i++){
++		ss_out_eps[i] = NULL;
++	}
++	for(i=0; i<MAX_EP_NUM; i++){
++		ss_in_eps[i] = NULL;
++	}
++	for(i=0; i<MAX_EP_NUM; i++){
++		hs_eps[i] = NULL;
++	}
++	for(i=0; i<MAX_EP_NUM; i++){
++		tt_intr_eps[i] = NULL;
++	}
++	return 0;
++}
++
++int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
++	, int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode
++	, int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){
++
++	struct sch_ep **ep_array;
++	int i;
++
++	if(is_in && dev_speed == USB_SPEED_SUPER ){
++		ep_array = (struct sch_ep **)ss_in_eps;
++	}
++	else if(dev_speed == USB_SPEED_SUPER){
++		ep_array = (struct sch_ep **)ss_out_eps;
++	}
++	else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){
++		ep_array = (struct sch_ep **)hs_eps;
++	}
++	else{
++		ep_array = (struct sch_ep **)tt_intr_eps;
++	}
++	for(i=0; i<MAX_EP_NUM; i++){
++		if(ep_array[i] == NULL){
++			tmp_ep->dev_speed = dev_speed;
++			tmp_ep->isTT = isTT;
++			tmp_ep->is_in = is_in;
++			tmp_ep->ep_type = ep_type;
++			tmp_ep->maxp = maxp;
++			tmp_ep->interval = interval;
++			tmp_ep->burst = burst;
++			tmp_ep->mult = mult;
++			tmp_ep->offset = offset;
++			tmp_ep->repeat = repeat;
++			tmp_ep->pkts = pkts;
++			tmp_ep->cs_count = cs_count;
++			tmp_ep->burst_mode = burst_mode;
++			tmp_ep->bw_cost = bw_cost;
++			tmp_ep->ep = ep;
++			ep_array[i] = tmp_ep;
++			return SCH_SUCCESS;
++		}
++	}
++	return SCH_FAIL;
++}
++
++int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat
++	, int td_size){
++	int i, j, k;
++	int bw_required[3];
++	int final_bw_required;
++	int bw_required_per_repeat;
++	int tmp_bw_required;
++	struct sch_ep *cur_sch_ep;
++	struct sch_ep **ep_array;
++	int cur_offset;
++	int cur_ep_offset;
++	int tmp_offset;
++	int tmp_interval;
++	int ep_offset;
++	int ep_interval;
++	int ep_repeat;
++	int ep_mult;
++	
++	if(is_in){
++		ep_array = (struct sch_ep **)ss_in_eps;
++	}
++	else{
++		ep_array = (struct sch_ep **)ss_out_eps;
++	}
++	
++	bw_required[0] = 0;
++	bw_required[1] = 0;
++	bw_required[2] = 0;
++	
++	if(repeat == 0){
++		final_bw_required = 0;
++		for(i=0; i<MAX_EP_NUM; i++){
++			cur_sch_ep = ep_array[i];
++			if(cur_sch_ep == NULL){
++				continue;
++			}
++			ep_interval = cur_sch_ep->interval;
++			ep_offset = cur_sch_ep->offset;
++			if(cur_sch_ep->repeat == 0){
++				if(ep_interval >= interval){
++					tmp_offset = ep_offset + ep_interval - offset;
++					tmp_interval = interval;
++				}
++				else{
++					tmp_offset = offset + interval - ep_offset;
++					tmp_interval = ep_interval;
++				}
++				if(tmp_offset % tmp_interval == 0){
++					final_bw_required += cur_sch_ep->bw_cost;
++				}
++			}
++			else{
++				ep_repeat = cur_sch_ep->repeat;
++				ep_mult = cur_sch_ep->mult;
++				for(k=0; k<=ep_mult; k++){
++					cur_ep_offset = ep_offset+(k*ep_mult);
++					if(ep_interval >= interval){
++						tmp_offset = cur_ep_offset + ep_interval - offset;
++						tmp_interval = interval;
++					}
++					else{
++						tmp_offset = offset + interval - cur_ep_offset;
++						tmp_interval = ep_interval;
++					}
++					if(tmp_offset % tmp_interval == 0){
++						final_bw_required += cur_sch_ep->bw_cost;
++						break;
++					}
++				}
++			}
++		}
++		final_bw_required += td_size;
++	}
++	else{
++		bw_required_per_repeat = maxp * (burst+1);
++		for(j=0; j<=mult; j++){
++			tmp_bw_required = 0;
++			cur_offset = offset+(j*repeat);
++			for(i=0; i<MAX_EP_NUM; i++){
++				cur_sch_ep = ep_array[i];
++				if(cur_sch_ep == NULL){
++					continue;
++				}
++				ep_interval = cur_sch_ep->interval;
++				ep_offset = cur_sch_ep->offset;
++				if(cur_sch_ep->repeat == 0){
++					if(ep_interval >= interval){
++						tmp_offset = ep_offset + ep_interval - cur_offset;
++						tmp_interval = interval;
++					}
++					else{
++						tmp_offset = cur_offset + interval - ep_offset;
++						tmp_interval = ep_interval;
++					}
++					if(tmp_offset % tmp_interval == 0){
++						tmp_bw_required += cur_sch_ep->bw_cost;
++					}
++				}
++				else{
++					ep_repeat = cur_sch_ep->repeat;
++					ep_mult = cur_sch_ep->mult;
++					for(k=0; k<=ep_mult; k++){
++						cur_ep_offset = ep_offset+(k*ep_repeat);
++						if(ep_interval >= interval){
++							tmp_offset = cur_ep_offset + ep_interval - cur_offset;
++							tmp_interval = interval;
++						}
++						else{
++							tmp_offset = cur_offset + interval - cur_ep_offset;
++							tmp_interval = ep_interval;
++						}
++						if(tmp_offset % tmp_interval == 0){
++							tmp_bw_required += cur_sch_ep->bw_cost;
++							break;
++						}
++					}
++				}
++			}
++			bw_required[j] = tmp_bw_required;
++		}
++		final_bw_required = SS_BW_BOUND;
++		for(j=0; j<=mult; j++){
++			if(bw_required[j] < final_bw_required){
++				final_bw_required = bw_required[j];
++			}
++		}
++		final_bw_required += bw_required_per_repeat;
++	}
++	return final_bw_required;
++}
++
++int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){
++	int i;
++	int bw_required;
++	struct sch_ep *cur_sch_ep;
++	int tmp_offset;
++	int tmp_interval;
++	int ep_offset;
++	int ep_interval;
++	int cur_tt_isoc_interval;	//for isoc tt check
++	
++	bw_required = 0;
++	for(i=0; i<MAX_EP_NUM; i++){
++		
++		cur_sch_ep = (struct sch_ep *)hs_eps[i];
++		if(cur_sch_ep == NULL){
++				continue;
++		}
++		ep_offset = cur_sch_ep->offset;
++		ep_interval = cur_sch_ep->interval;
++		
++		if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
++			cur_tt_isoc_interval = ep_interval<<3;
++			if(ep_interval >= interval){
++				tmp_offset = ep_offset + cur_tt_isoc_interval - offset;
++				tmp_interval = interval;
++			}
++			else{
++				tmp_offset = offset + interval - ep_offset;
++				tmp_interval = cur_tt_isoc_interval;
++			}
++			if(cur_sch_ep->is_in){
++				if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
++					bw_required += 188;
++				}
++			}
++			else{
++				if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
++					bw_required += 188;
++				}
++			}
++		}
++		else{
++			if(ep_interval >= interval){
++				tmp_offset = ep_offset + ep_interval - offset;
++				tmp_interval = interval;
++			}
++			else{
++				tmp_offset = offset + interval - ep_offset;
++				tmp_interval = ep_interval;
++			}
++			if(tmp_offset%tmp_interval == 0){
++				bw_required += cur_sch_ep->bw_cost;
++			}
++		}
++	}
++	bw_required += td_size;
++	return bw_required;
++}
++
++int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){
++	char is_cs;
++	int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe;
++	int bw_required, max_bw;
++	int ss_cs_count;
++	int cs_mframe;
++	int max_frame;
++	int i,j;
++	struct sch_ep *cur_sch_ep;
++	int ep_offset;
++	int ep_interval;
++	int ep_cs_count;
++	int tt_isoc_interval;	//for isoc tt check
++	int cur_tt_isoc_interval;	//for isoc tt check
++	int tmp_offset;
++	int tmp_interval;
++	
++	is_cs = 0;
++	
++	tt_isoc_interval = interval<<3;	//frame to mframe
++	if(is_in){
++		is_cs = 1;
++	}
++	s_frame = offset/8;
++	s_mframe = offset%8;
++	ss_cs_count = (maxp + (188 - 1))/188;
++	if(is_cs){
++		cs_mframe = offset%8 + 2 + ss_cs_count;
++		if (cs_mframe <= 6)
++			ss_cs_count += 2;
++		else if (cs_mframe == 7)
++			ss_cs_count++;
++		else if (cs_mframe > 8)
++			return -1;
++	}
++	max_bw = 0;
++	if(is_in){
++		i=2;
++	}
++	for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){
++		bw_required = 0;
++		for(j=0; j<MAX_EP_NUM; j++){
++			cur_sch_ep = (struct sch_ep *)hs_eps[j];
++			if(cur_sch_ep == NULL){
++				continue;
++			}
++			ep_offset = cur_sch_ep->offset;
++			ep_interval = cur_sch_ep->interval;
++			if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
++				//isoc tt
++				//check if mframe offset overlap
++				//if overlap, add 188 to the bw
++				cur_tt_isoc_interval = ep_interval<<3;
++				if(cur_tt_isoc_interval >= tt_isoc_interval){
++					tmp_offset = (ep_offset+cur_tt_isoc_interval)  - cur_mframe;
++					tmp_interval = tt_isoc_interval;
++				}
++				else{
++					tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
++					tmp_interval = cur_tt_isoc_interval;
++				}
++				if(cur_sch_ep->is_in){
++					if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
++						bw_required += 188;
++					}
++				}
++				else{
++					if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
++						bw_required += 188;
++					}
++				}
++				
++			}
++			else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){
++				//check if mframe
++				if(ep_interval >= tt_isoc_interval){
++					tmp_offset = (ep_offset+ep_interval) - cur_mframe;
++					tmp_interval = tt_isoc_interval;
++				}
++				else{
++					tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
++					tmp_interval = ep_interval;
++				}
++				if(tmp_offset%tmp_interval == 0){
++					bw_required += cur_sch_ep->bw_cost;
++				}
++			}
++		}
++		bw_required += 188;
++		if(bw_required > max_bw){
++			max_bw = bw_required;
++		}
++	}
++	return max_bw;
++}
++
++int count_tt_intr_bw(int interval, int frame_offset){
++	//check all eps in tt_intr_eps
++	int ret;
++	int i,j;
++	int ep_offset;
++	int ep_interval;
++	int tmp_offset;
++	int tmp_interval;
++	ret = SCH_SUCCESS;
++	struct sch_ep *cur_sch_ep;
++	
++	for(i=0; i<MAX_EP_NUM; i++){
++		cur_sch_ep = (struct sch_ep *)tt_intr_eps[i];
++		if(cur_sch_ep == NULL){
++			continue;
++		}
++		ep_offset = cur_sch_ep->offset;
++		ep_interval = cur_sch_ep->interval;
++		if(ep_interval  >= interval){
++			tmp_offset = ep_offset + ep_interval - frame_offset;
++			tmp_interval = interval;
++		}
++		else{
++			tmp_offset = frame_offset + interval - ep_offset;
++			tmp_interval = ep_interval;
++		}
++		
++		if(tmp_offset%tmp_interval==0){
++			return SCH_FAIL;
++		}
++	}
++	return SCH_SUCCESS;
++}
++
++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){
++	int i;
++	struct sch_ep **ep_array;
++	struct sch_ep *cur_ep;
++
++	if (is_in && dev_speed == USB_SPEED_SUPER) {
++		ep_array = (struct sch_ep **)ss_in_eps;
++	}
++	else if (dev_speed == USB_SPEED_SUPER) {
++		ep_array = (struct sch_ep **)ss_out_eps;
++	}
++	else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) {
++		ep_array = (struct sch_ep **)hs_eps;
++	}
++	else {
++		ep_array = (struct sch_ep **)tt_intr_eps;
++	}
++	for (i = 0; i < MAX_EP_NUM; i++) {
++		cur_ep = (struct sch_ep *)ep_array[i];
++		if(cur_ep != NULL && cur_ep->ep == ep){
++			ep_array[i] = NULL;
++			return cur_ep;
++		}
++	}
++	return NULL;
++}
++
++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
++	, int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){
++	mtk_u32 bPkts = 0;
++	mtk_u32 bCsCount = 0;
++	mtk_u32 bBm = 1;
++	mtk_u32 bOffset = 0;
++	mtk_u32 bRepeat = 0;
++	int ret;
++	struct mtk_xhci_ep_ctx *temp_ep_ctx;
++	int td_size;
++	int mframe_idx, frame_idx;
++	int bw_cost;
++	int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat;
++	int cur_offset, cs_mframe;
++	int break_out;
++	int frame_interval;
++
++	printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp
++		, interval, burst, mult, ep, ep_ctx, sch_ep);
++	if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){
++		frame_interval = interval >> 3;
++		for(frame_idx=0; frame_idx<frame_interval; frame_idx++){
++			printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx);
++			if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){
++				printk(KERN_ERR "check OK............\n");
++				bOffset = frame_idx<<3;
++				bPkts = 1;
++				bCsCount = 3;
++				bw_cost = maxp;
++				bRepeat = 0;
++				if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult
++					, bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){
++					return SCH_FAIL;
++				}
++				ret = SCH_SUCCESS;
++				break;
++			}
++		}
++	}
++	else if(isTT && ep_type == USB_EP_ISOC){
++		best_bw = HS_BW_BOUND;
++		best_bw_idx = -1;
++		cur_bw = 0;
++		td_size = maxp;
++		break_out = 0;
++		frame_interval = interval>>3;
++		for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){
++			for(mframe_idx=0; mframe_idx<8; mframe_idx++){
++				cur_offset = (frame_idx*8) + mframe_idx;
++				cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size);
++				if(cur_bw > 0 && cur_bw < best_bw){
++					best_bw_idx = cur_offset;
++					best_bw = cur_bw;
++					if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
++						break_out = 1;
++						break;
++					}
++				}
++			}
++		}
++		if(best_bw_idx == -1){
++			return SCH_FAIL;
++		}
++		else{
++			bOffset = best_bw_idx;
++			bPkts = 1;
++			bCsCount = (maxp + (188 - 1)) / 188;
++			if(is_in){
++				cs_mframe = bOffset%8 + 2 + bCsCount;
++				if (cs_mframe <= 6)
++					bCsCount += 2;
++				else if (cs_mframe == 7)
++					bCsCount++;
++			}
++			bw_cost = 188;
++			bRepeat = 0;
++			if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
++				, bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
++				return SCH_FAIL;
++			}
++			ret = SCH_SUCCESS;
++		}
++	}
++	else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){
++		bPkts = 1;
++		ret = SCH_SUCCESS;
++	}
++	else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){
++		bPkts = 1;
++		ret = SCH_SUCCESS;
++	}
++	else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
++		best_bw = HS_BW_BOUND;
++		best_bw_idx = -1;
++		cur_bw = 0;
++		td_size = maxp*(burst+1);
++		for(cur_offset = 0; cur_offset<interval; cur_offset++){
++			cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size);
++			if(cur_bw > 0 && cur_bw < best_bw){
++				best_bw_idx = cur_offset;
++				best_bw = cur_bw;
++				if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
++					break;
++				}
++			}
++		}
++		if(best_bw_idx == -1){
++			return SCH_FAIL;
++		}
++		else{
++			bOffset = best_bw_idx;
++			bPkts = burst + 1;
++			bCsCount = 0;
++			bw_cost = td_size;
++			bRepeat = 0;
++			if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
++				, bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
++				return SCH_FAIL;
++			}
++			ret = SCH_SUCCESS;
++		}
++	}
++	else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
++		best_bw = SS_BW_BOUND;
++		best_bw_idx = -1;
++		cur_bw = 0;
++		td_size = maxp * (mult+1) * (burst+1);
++		if(mult == 0){
++			max_repeat = 0;
++		}
++		else{
++			max_repeat = (interval-1)/(mult+1);
++		}
++		break_out = 0;
++		for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){
++			for(repeat = max_repeat; repeat >= 0; repeat--){
++				cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx
++					, repeat, td_size);
++				printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n"
++					, frame_idx, repeat, td_size, cur_bw);
++				if(cur_bw > 0 && cur_bw < best_bw){
++					best_bw_idx = frame_idx;
++					best_bw_repeat = repeat;
++					best_bw = cur_bw;
++					if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){
++						break_out = 1;
++						break;
++					}
++				}
++			}
++		}
++		printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat);
++		if(best_bw_idx == -1){
++			return SCH_FAIL;
++		}
++		else{
++			bOffset = best_bw_idx;
++			bCsCount = 0;
++			bRepeat = best_bw_repeat;
++			if(bRepeat == 0){
++				bw_cost = (burst+1)*(mult+1)*maxp;
++				bPkts = (burst+1)*(mult+1);
++			}
++			else{
++				bw_cost = (burst+1)*maxp;
++				bPkts = (burst+1);
++			}
++			if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
++				, bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
++				return SCH_FAIL;
++			}
++			ret = SCH_SUCCESS;
++		}
++	}
++	else{
++		bPkts = 1;
++		ret = SCH_SUCCESS;
++	}
++	if(ret == SCH_SUCCESS){
++		temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx;
++		temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm));
++		temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat));
++
++		printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm);
++		printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat);
++		return SCH_SUCCESS;
++	}
++	else{
++		return SCH_FAIL;
++	}
++}
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk-scheduler.h
+@@ -0,0 +1,77 @@
++#ifndef _XHCI_MTK_SCHEDULER_H
++#define _XHCI_MTK_SCHEDULER_H
++
++#define MTK_SCH_NEW		1
++
++#define SCH_SUCCESS		1
++#define SCH_FAIL		0
++
++#define MAX_EP_NUM		64
++#define SS_BW_BOUND		51000
++#define HS_BW_BOUND		6144
++
++#define USB_EP_CONTROL		0
++#define USB_EP_ISOC		1
++#define USB_EP_BULK		2
++#define USB_EP_INT		3
++
++#define USB_SPEED_LOW		1
++#define USB_SPEED_FULL		2
++#define USB_SPEED_HIGH		3
++#define USB_SPEED_SUPER		5
++
++/* mtk scheduler bitmasks */
++#define BPKTS(p)		((p) & 0x3f)
++#define BCSCOUNT(p)		(((p) & 0x7) << 8)
++#define BBM(p)			((p) << 11)
++#define BOFFSET(p)		((p) & 0x3fff)
++#define BREPEAT(p)		(((p) & 0x7fff) << 16)
++
++
++#if 1
++typedef unsigned int mtk_u32;
++typedef unsigned long long mtk_u64;
++#endif
++
++#define NULL ((void *)0)
++
++struct mtk_xhci_ep_ctx {
++	mtk_u32	ep_info;
++	mtk_u32	ep_info2;
++	mtk_u64	deq;
++	mtk_u32	tx_info;
++	/* offset 0x14 - 0x1f reserved for HC internal use */
++	mtk_u32	reserved[3];
++};
++
++
++struct sch_ep
++{
++	//device info
++	int dev_speed;
++	int isTT;
++	//ep info
++	int is_in;
++	int ep_type;
++	int maxp;
++	int interval;
++	int burst;
++	int mult;
++	//scheduling info
++	int offset;
++	int repeat;
++	int pkts;
++	int cs_count;
++	int burst_mode;
++	//other
++	int bw_cost;	//bandwidth cost in each repeat; including overhead
++	mtk_u32 *ep;		//address of usb_endpoint pointer
++};
++
++int mtk_xhci_scheduler_init(void);
++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
++	, int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep);
++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep);
++
++
++#endif
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk.c
+@@ -0,0 +1,265 @@
++#include "xhci-mtk.h"
++#include "xhci-mtk-power.h"
++#include "xhci.h"
++#include "mtk-phy.h"
++#ifdef CONFIG_C60802_SUPPORT
++#include "mtk-phy-c60802.h"
++#endif
++#include "xhci-mtk-scheduler.h"
++#include <linux/kernel.h>       /* printk() */
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <asm/uaccess.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++
++void setInitialReg(void )
++{
++	__u32 __iomem *addr;
++	u32 temp;
++
++	/* set SSUSB DMA burst size to 128B */
++	addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG;
++	temp = SSUSB_HDMA_CFG_MT7621_VALUE;
++	writel(temp, addr);
++
++	/* extend U3 LTSSM Polling.LFPS timeout value */
++	addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3;
++	temp = U3_LTSSM_TIMING_PARAMETER3_VALUE;
++	writel(temp, addr);
++
++	/* EOF */
++	addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF;
++	temp = SYNC_HS_EOF_VALUE;
++	writel(temp, addr);
++
++#if defined (CONFIG_PERIODIC_ENP)
++	/* HSCH_CFG1: SCH2_FIFO_DEPTH */
++	addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1;
++	temp = readl(addr);
++	temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET);
++	writel(temp, addr);
++#endif
++
++	/* Doorbell handling */
++	addr = SIFSLV_IPPC + SSUSB_IP_SPAR0;
++	temp = 0x1;
++	writel(temp, addr);
++
++	/* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */
++	/* Port 0 */
++	addr = U2_PHY_BASE + U2_PHYD_CR1;
++	temp = readl(addr);
++	temp &= ~(0x3 << 18);
++	temp |= (1 << 18);
++	writel(temp, addr);
++
++	/* Port 1 */
++	addr = U2_PHY_BASE_P1 + U2_PHYD_CR1;
++	temp = readl(addr);
++	temp &= ~(0x3 << 18);
++	temp |= (1 << 18);
++	writel(temp, addr);
++}
++
++
++void setLatchSel(void){
++	__u32 __iomem *latch_sel_addr;
++	u32 latch_sel_value;
++	latch_sel_addr = U3_PIPE_LATCH_SEL_ADD;
++	latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX);
++	writel(latch_sel_value, latch_sel_addr);
++}
++
++void reinitIP(void){
++	__u32 __iomem *ip_reset_addr;
++	u32 ip_reset_value;
++
++	enableAllClockPower();
++	mtk_xhci_scheduler_init();
++}
++
++void dbg_prb_out(void){
++	mtk_probe_init(0x0f0f0f0f);
++	mtk_probe_out(0xffffffff);
++	mtk_probe_out(0x01010101);
++	mtk_probe_out(0x02020202);
++	mtk_probe_out(0x04040404);
++	mtk_probe_out(0x08080808);
++	mtk_probe_out(0x10101010);
++	mtk_probe_out(0x20202020);
++	mtk_probe_out(0x40404040);
++	mtk_probe_out(0x80808080);
++	mtk_probe_out(0x55555555);
++	mtk_probe_out(0xaaaaaaaa);
++}
++
++
++
++///////////////////////////////////////////////////////////////////////////////
++
++#define RET_SUCCESS 0
++#define RET_FAIL 1
++
++static int dbg_u3w(int argc, char**argv)
++{
++	int u4TimingValue;
++	char u1TimingValue;
++	int u4TimingAddress;
++
++	if (argc<3)
++    {
++        printk(KERN_ERR "Arg: address value\n");
++        return RET_FAIL;
++    }
++	u3phy_init();
++	
++	u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
++	u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16);
++	u1TimingValue = u4TimingValue & 0xff;
++	/* access MMIO directly */
++	writel(u1TimingValue, u4TimingAddress);
++	printk(KERN_ERR "Write done\n");
++	return RET_SUCCESS;
++	
++}
++
++static int dbg_u3r(int argc, char**argv)
++{
++	char u1ReadTimingValue;
++	int u4TimingAddress;
++	if (argc<2)
++    {
++        printk(KERN_ERR "Arg: address\n");
++        return 0;
++    }
++	u3phy_init();
++	mdelay(500);
++	u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
++	/* access MMIO directly */
++	u1ReadTimingValue = readl(u4TimingAddress);
++	printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue);
++	return 0;
++}
++
++static int dbg_u3init(int argc, char**argv)
++{
++	int ret;
++	ret = u3phy_init();
++	printk(KERN_ERR "phy registers and operations initial done\n");
++	if(u3phy_ops->u2_slew_rate_calibration){
++		u3phy_ops->u2_slew_rate_calibration(u3phy);
++	}
++	else{
++		printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
++	}
++	if(u3phy_ops->init(u3phy) == PHY_TRUE)
++		return RET_SUCCESS;
++	return RET_FAIL;
++}
++
++void dbg_setU1U2(int argc, char**argv){
++	struct xhci_hcd *xhci;
++	int u1_value;
++	int u2_value;
++	u32 port_id, temp;
++	u32 __iomem *addr;
++	
++	if (argc<3)
++    {
++        printk(KERN_ERR "Arg: u1value u2value\n");
++        return RET_FAIL;
++    }
++
++	u1_value = (int)simple_strtol(argv[1], &argv[1], 10);
++	u2_value = (int)simple_strtol(argv[2], &argv[2], 10);
++	addr = (SSUSB_U3_XHCI_BASE + 0x424);
++	temp = readl(addr);
++	temp = temp & (~(0x0000ffff));
++	temp = temp | u1_value | (u2_value<<8);
++	writel(temp, addr);
++}
++///////////////////////////////////////////////////////////////////////////////
++
++int call_function(char *buf)
++{
++	int i;
++	int argc;
++	char *argv[80];
++
++	argc = 0;
++	do
++	{
++		argv[argc] = strsep(&buf, " ");
++		printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]);
++		argc++;
++	} while (buf);
++	if (!strcmp("dbg.r", argv[0]))
++		dbg_prb_out();
++	else if (!strcmp("dbg.u3w", argv[0]))
++		dbg_u3w(argc, argv);
++	else if (!strcmp("dbg.u3r", argv[0]))
++		dbg_u3r(argc, argv);
++	else if (!strcmp("dbg.u3i", argv[0]))
++		dbg_u3init(argc, argv);
++	else if (!strcmp("pw.u1u2", argv[0]))
++		dbg_setU1U2(argc, argv);
++	return 0;
++}
++
++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
++{
++	char w_buf[200];
++	char r_buf[200] = "this is a test";
++	int len = 200;
++
++	switch (cmd) {
++		case IOCTL_READ:
++			copy_to_user((char *) arg, r_buf, len);
++			printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf);
++			break;
++		case IOCTL_WRITE:
++			copy_from_user(w_buf, (char *) arg, len);
++			printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf);
++
++			//invoke function
++			return call_function(w_buf);
++			break;
++		default:
++			return -ENOTTY;
++	}
++
++	return len;
++}
++
++int xhci_mtk_test_open(struct inode *inode, struct file *file)
++{
++
++    printk(KERN_DEBUG "xhci_mtk_test open: successful\n");
++    return 0;
++}
++
++int xhci_mtk_test_release(struct inode *inode, struct file *file)
++{
++
++    printk(KERN_DEBUG "xhci_mtk_test release: successful\n");
++    return 0;
++}
++
++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr)
++{
++
++    printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n");
++    return 0;
++}
++
++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
++{
++
++    printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n");
++    return 0;
++}
++
++
++
++
+--- /dev/null
++++ b/drivers/usb/host/xhci-mtk.h
+@@ -0,0 +1,120 @@
++#ifndef _XHCI_MTK_H
++#define _XHCI_MTK_H
++
++#include <linux/usb.h>
++#include "xhci.h"
++
++#define SSUSB_U3_XHCI_BASE		0xBE1C0000
++#define SSUSB_U3_MAC_BASE		0xBE1C2400
++#define SSUSB_U3_SYS_BASE		0xBE1C2600
++#define SSUSB_U2_SYS_BASE		0xBE1C3400
++#define SSUB_SIF_SLV_TOP		0xBE1D0000
++#define SIFSLV_IPPC			(SSUB_SIF_SLV_TOP + 0x700)
++
++#define U3_PIPE_LATCH_SEL_ADD 		SSUSB_U3_MAC_BASE + 0x130
++#define U3_PIPE_LATCH_TX		0
++#define U3_PIPE_LATCH_RX		0
++
++#define U3_UX_EXIT_LFPS_TIMING_PAR	0xa0
++#define U3_REF_CK_PAR			0xb0
++#define U3_RX_UX_EXIT_LFPS_REF_OFFSET	8
++#define U3_RX_UX_EXIT_LFPS_REF		3
++#define	U3_REF_CK_VAL			10
++
++#define U3_TIMING_PULSE_CTRL		0xb4
++#define CNT_1US_VALUE			63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125
++
++#define USB20_TIMING_PARAMETER		0x40
++#define TIME_VALUE_1US			63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125
++
++#define LINK_PM_TIMER			0x8
++#define PM_LC_TIMEOUT_VALUE		3
++
++#define XHCI_IMOD			0x624
++#define XHCI_IMOD_MT7621_VALUE		0x10
++
++#define SSUSB_HDMA_CFG			0x950
++#define SSUSB_HDMA_CFG_MT7621_VALUE	0x10E0E0C
++
++#define U3_LTSSM_TIMING_PARAMETER3		0x2514
++#define U3_LTSSM_TIMING_PARAMETER3_VALUE	0x3E8012C
++
++#define U2_PHYD_CR1			0x64
++
++#define SSUSB_IP_SPAR0			0xC8
++
++#define SYNC_HS_EOF			0x938
++#define SYNC_HS_EOF_VALUE		0x201F3
++
++#define HSCH_CFG1			0x960
++#define SCH2_FIFO_DEPTH_OFFSET		16
++
++
++#define SSUSB_IP_PW_CTRL		(SIFSLV_IPPC+0x0)
++#define SSUSB_IP_SW_RST			(1<<0)
++#define SSUSB_IP_PW_CTRL_1		(SIFSLV_IPPC+0x4)
++#define SSUSB_IP_PDN			(1<<0)
++#define SSUSB_U3_CTRL(p)		(SIFSLV_IPPC+0x30+(p*0x08))
++#define SSUSB_U3_PORT_DIS		(1<<0)
++#define SSUSB_U3_PORT_PDN		(1<<1)
++#define SSUSB_U3_PORT_HOST_SEL		(1<<2)
++#define SSUSB_U3_PORT_CKBG_EN		(1<<3)
++#define SSUSB_U3_PORT_MAC_RST		(1<<4)
++#define SSUSB_U3_PORT_PHYD_RST		(1<<5)
++#define SSUSB_U2_CTRL(p)		(SIFSLV_IPPC+(0x50)+(p*0x08))
++#define SSUSB_U2_PORT_DIS		(1<<0)
++#define SSUSB_U2_PORT_PDN		(1<<1)
++#define SSUSB_U2_PORT_HOST_SEL		(1<<2)
++#define SSUSB_U2_PORT_CKBG_EN		(1<<3)
++#define SSUSB_U2_PORT_MAC_RST		(1<<4)
++#define SSUSB_U2_PORT_PHYD_RST		(1<<5)
++#define SSUSB_IP_CAP			(SIFSLV_IPPC+0x024)
++
++#define SSUSB_U3_PORT_NUM(p)		(p & 0xff)
++#define SSUSB_U2_PORT_NUM(p)		((p>>8) & 0xff)
++
++
++#define XHCI_MTK_TEST_MAJOR		234
++#define DEVICE_NAME			"xhci_mtk_test"
++
++#define CLI_MAGIC			'CLI'
++#define IOCTL_READ			_IOR(CLI_MAGIC, 0, int)
++#define IOCTL_WRITE			_IOW(CLI_MAGIC, 1, int)
++
++void reinitIP(void);
++void setInitialReg(void);
++void dbg_prb_out(void);
++int call_function(char *buf);
++
++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
++int xhci_mtk_test_open(struct inode *inode, struct file *file);
++int xhci_mtk_test_release(struct inode *inode, struct file *file);
++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr);
++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos);
++
++/*
++  mediatek probe out
++*/
++/************************************************************************************/
++
++#define SW_PRB_OUT_ADDR		(SIFSLV_IPPC+0xc0)
++#define PRB_MODULE_SEL_ADDR	(SIFSLV_IPPC+0xbc)
++
++static inline void mtk_probe_init(const u32 byte){
++	__u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR;
++	writel(byte, ptr);
++}
++
++static inline void mtk_probe_out(const u32 value){
++	__u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
++	writel(value, ptr);
++}
++
++static inline u32 mtk_probe_value(void){
++	__u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
++
++	return readl(ptr);
++}
++
++
++#endif
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -33,6 +33,13 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
+ 	 * dev struct in order to setup MSI
+ 	 */
+ 	xhci->quirks |= XHCI_PLAT;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	/* MTK host controller gives a spurious successful event after a 
++	 * short transfer. Ignore it.
++	 */
++	xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
++	xhci->quirks |= XHCI_LPM_SUPPORT;
++#endif
+ }
+ 
+ /* called during probe() after chip reset completes */
+@@ -79,7 +86,11 @@ static int xhci_plat_probe(struct platform_device *pdev)
+ 
+ 	driver = &xhci_plat_hc_driver;
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	irq = XHC_IRQ;
++#else
+ 	irq = platform_get_irq(pdev, 0);
++#endif
+ 	if (irq < 0)
+ 		return -ENODEV;
+ 
+--- a/drivers/usb/host/xhci-ring.c
++++ b/drivers/usb/host/xhci-ring.c
+@@ -254,16 +254,20 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ 		unsigned int num_trbs)
+ {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 	int num_trbs_in_deq_seg;
++#endif
+ 
+ 	if (ring->num_trbs_free < num_trbs)
+ 		return 0;
+ 
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 	if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
+ 		num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
+ 		if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
+ 			return 0;
+ 	}
++#endif
+ 
+ 	return 1;
+ }
+@@ -2799,6 +2803,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+ 		next = ring->enqueue;
+ 
+ 		while (last_trb(xhci, ring, ring->enq_seg, next)) {
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 			/* If we're not dealing with 0.95 hardware or isoc rings
+ 			 * on AMD 0.96 host, clear the chain bit.
+ 			 */
+@@ -2808,6 +2813,9 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+ 				next->link.control &= cpu_to_le32(~TRB_CHAIN);
+ 			else
+ 				next->link.control |= cpu_to_le32(TRB_CHAIN);
++#else
++			next->link.control &= cpu_to_le32(~TRB_CHAIN);
++#endif
+ 
+ 			wmb();
+ 			next->link.control ^= cpu_to_le32(TRB_CYCLE);
+@@ -2938,6 +2946,9 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
+ 		start_trb->field[3] |= cpu_to_le32(start_cycle);
+ 	else
+ 		start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	wmb();
++#endif
+ 	xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
+ }
+ 
+@@ -2993,6 +3004,29 @@ static u32 xhci_td_remainder(unsigned int remainder)
+ 		return (remainder >> 10) << 17;
+ }
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length)
++{
++	u32 max = 31;
++	int remainder, td_packet_count, packet_transferred;
++	
++	//0 for the last TRB
++	//FIXME: need to workaround if there is ZLP in this TD
++	if (td_running_total + trb_buffer_length == td_transfer_size)
++		return 0;
++	
++	//FIXME: need to take care of high-bandwidth (MAX_ESIT)
++	packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp;
++	td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp);
++	remainder = td_packet_count - packet_transferred;
++		
++	if (remainder > max)
++		return max << 17;
++	else
++		return remainder << 17;
++}
++#endif
++
+ /*
+  * For xHCI 1.0 host controllers, TD size is the number of max packet sized
+  * packets remaining in the TD (*not* including this TRB).
+@@ -3130,6 +3164,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 		}
+ 
+ 		/* Set the TRB length, TD size, and interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 		if (xhci->hci_version < 0x100) {
+ 			remainder = xhci_td_remainder(
+ 					urb->transfer_buffer_length -
+@@ -3139,6 +3174,12 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 					trb_buff_len, total_packet_count, urb,
+ 					num_trbs - 1);
+ 		}
++#else
++		if (num_trbs > 1)
++			remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, 
++				running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len);
++#endif
++
+ 		length_field = TRB_LEN(trb_buff_len) |
+ 			remainder |
+ 			TRB_INTR_TARGET(0);
+@@ -3201,6 +3242,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 	int running_total, trb_buff_len, ret;
+ 	unsigned int total_packet_count;
+ 	u64 addr;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	int max_packet;
++#endif
+ 
+ 	if (urb->num_sgs)
+ 		return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
+@@ -3226,6 +3270,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 		running_total += TRB_MAX_BUFF_SIZE;
+ 	}
+ 	/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	switch(urb->dev->speed){
++		case USB_SPEED_SUPER:
++			max_packet = urb->ep->desc.wMaxPacketSize;
++			break;
++		case USB_SPEED_HIGH:
++		case USB_SPEED_FULL:
++		case USB_SPEED_LOW:
++		case USB_SPEED_WIRELESS:
++		case USB_SPEED_UNKNOWN:
++		default:
++			max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
++			break;
++	}
++	if((urb->transfer_flags & URB_ZERO_PACKET) 
++		&& ((urb->transfer_buffer_length % max_packet) == 0)){
++		num_trbs++;
++	}
++#endif
+ 
+ 	ret = prepare_transfer(xhci, xhci->devs[slot_id],
+ 			ep_index, urb->stream_id,
+@@ -3285,6 +3348,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 			field |= TRB_ISP;
+ 
+ 		/* Set the TRB length, TD size, and interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 		if (xhci->hci_version < 0x100) {
+ 			remainder = xhci_td_remainder(
+ 					urb->transfer_buffer_length -
+@@ -3294,6 +3358,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 					trb_buff_len, total_packet_count, urb,
+ 					num_trbs - 1);
+ 		}
++#else
++		remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
++#endif
++
+ 		length_field = TRB_LEN(trb_buff_len) |
+ 			remainder |
+ 			TRB_INTR_TARGET(0);
+@@ -3383,7 +3451,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 		field |= 0x1;
+ 
+ 	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	if (1) {
++#else
+ 	if (xhci->hci_version == 0x100) {
++#endif
+ 		if (urb->transfer_buffer_length > 0) {
+ 			if (setup->bRequestType & USB_DIR_IN)
+ 				field |= TRB_TX_TYPE(TRB_DATA_IN);
+@@ -3407,7 +3479,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 		field = TRB_TYPE(TRB_DATA);
+ 
+ 	length_field = TRB_LEN(urb->transfer_buffer_length) |
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 		xhci_td_remainder(urb->transfer_buffer_length) |
++#else
++		//CC: MTK style, no scatter-gather for control transfer
++		0 |
++#endif
+ 		TRB_INTR_TARGET(0);
+ 	if (urb->transfer_buffer_length > 0) {
+ 		if (setup->bRequestType & USB_DIR_IN)
+@@ -3530,6 +3607,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 	u64 start_addr, addr;
+ 	int i, j;
+ 	bool more_trbs_coming;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	int max_packet;
++#endif
+ 
+ 	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+ 
+@@ -3543,6 +3623,21 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 	start_trb = &ep_ring->enqueue->generic;
+ 	start_cycle = ep_ring->cycle_state;
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	switch(urb->dev->speed){
++		case USB_SPEED_SUPER:
++			max_packet = urb->ep->desc.wMaxPacketSize;
++			break;
++		case USB_SPEED_HIGH:
++		case USB_SPEED_FULL:
++		case USB_SPEED_LOW:
++		case USB_SPEED_WIRELESS:
++		case USB_SPEED_UNKNOWN:
++			max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
++			break;
++	}
++#endif
++
+ 	urb_priv = urb->hcpriv;
+ 	/* Queue the first TRB, even if it's zero-length */
+ 	for (i = 0; i < num_tds; i++) {
+@@ -3614,9 +3709,13 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 			} else {
+ 				td->last_trb = ep_ring->enqueue;
+ 				field |= TRB_IOC;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++				if (!(xhci->quirks & XHCI_AVOID_BEI)) {
++#else
+ 				if (xhci->hci_version == 0x100 &&
+ 						!(xhci->quirks &
+ 							XHCI_AVOID_BEI)) {
++#endif
+ 					/* Set BEI bit except for the last td */
+ 					if (i < num_tds - 1)
+ 						field |= TRB_BEI;
+@@ -3631,6 +3730,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 				trb_buff_len = td_remain_len;
+ 
+ 			/* Set the TRB length, TD size, & interrupter fields. */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 			if (xhci->hci_version < 0x100) {
+ 				remainder = xhci_td_remainder(
+ 						td_len - running_total);
+@@ -3640,6 +3740,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ 						total_packet_count, urb,
+ 						(trbs_per_td - j - 1));
+ 			}
++#else
++			remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
++#endif
++
+ 			length_field = TRB_LEN(trb_buff_len) |
+ 				remainder |
+ 				TRB_INTR_TARGET(0);
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -32,6 +32,16 @@
+ #include "xhci.h"
+ #include "xhci-trace.h"
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#include <asm/uaccess.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++#include "mtk-phy.h"
++#include "xhci-mtk-scheduler.h"
++#include "xhci-mtk-power.h"
++#include "xhci-mtk.h"
++#endif
++
+ #define DRIVER_AUTHOR "Sarah Sharp"
+ #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+ 
+@@ -46,6 +56,18 @@ static unsigned int quirks;
+ module_param(quirks, uint, S_IRUGO);
+ MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
++static struct file_operations xhci_mtk_test_fops = {
++    .owner =		THIS_MODULE,
++    .read =		xhci_mtk_test_read,
++    .write =		xhci_mtk_test_write,
++    .unlocked_ioctl =	xhci_mtk_test_unlock_ioctl,
++    .open =		xhci_mtk_test_open,
++    .release =		xhci_mtk_test_release,
++};
++#endif
++
+ /* TODO: copied from ehci-hcd.c - can this be refactored? */
+ /*
+  * xhci_handshake - spin reading hc until handshake completes or fails
+@@ -198,7 +220,7 @@ int xhci_reset(struct xhci_hcd *xhci)
+ 	return ret;
+ }
+ 
+-#ifdef CONFIG_PCI
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ static int xhci_free_msi(struct xhci_hcd *xhci)
+ {
+ 	int i;
+@@ -448,6 +470,11 @@ static void compliance_mode_recovery(unsigned long arg)
+ 					"Attempting compliance mode recovery");
+ 			hcd = xhci->shared_hcd;
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++			temp |= (1 << 31);
++			writel(temp, xhci->usb3_ports[i]);
++#endif
++
+ 			if (hcd->state == HC_STATE_SUSPENDED)
+ 				usb_hcd_resume_root_hub(hcd);
+ 
+@@ -497,6 +524,9 @@ static bool xhci_compliance_mode_recovery_timer_quirk_check(void)
+ {
+ 	const char *dmi_product_name, *dmi_sys_vendor;
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	return true;
++#endif
+ 	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ 	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ 	if (!dmi_product_name || !dmi_sys_vendor)
+@@ -542,6 +572,10 @@ int xhci_init(struct usb_hcd *hcd)
+ 		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ 				"xHCI doesn't need link TRB QUIRK");
+ 	}
++
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	mtk_xhci_scheduler_init();
++#endif
+ 	retval = xhci_mem_init(xhci, GFP_KERNEL);
+ 	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
+ 
+@@ -626,7 +660,11 @@ int xhci_run(struct usb_hcd *hcd)
+ 			"// Set the interrupt modulation register");
+ 	temp = readl(&xhci->ir_set->irq_control);
+ 	temp &= ~ER_IRQ_INTERVAL_MASK;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	temp |= (u32) 16;
++#else
+ 	temp |= (u32) 160;
++#endif
+ 	writel(temp, &xhci->ir_set->irq_control);
+ 
+ 	/* Set the HCD state before we enable the irqs */
+@@ -651,6 +689,9 @@ int xhci_run(struct usb_hcd *hcd)
+ 		xhci_queue_vendor_command(xhci, command, 0, 0, 0,
+ 				TRB_TYPE(TRB_NEC_GET_FW));
+ 	}
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	enableXhciAllPortPower(xhci);
++#endif
+ 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ 			"Finished xhci_run for USB2 roothub");
+ 	return 0;
+@@ -1642,6 +1683,14 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ 	u32 drop_flag;
+ 	u32 new_add_flags, new_drop_flags;
+ 	int ret;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#if MTK_SCH_NEW
++	struct xhci_slot_ctx *slot_ctx;
++	struct sch_ep *sch_ep = NULL;
++	int isTT;
++	int ep_type;
++#endif
++#endif
+ 
+ 	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+ 	if (ret <= 0)
+@@ -1689,6 +1738,40 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ 
+ 	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#if MTK_SCH_NEW
++	slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx);
++	if ((slot_ctx->tt_info & 0xff) > 0) {
++		isTT = 1;
++	}
++	else {
++		isTT = 0;
++	}
++	if (usb_endpoint_xfer_int(&ep->desc)) {
++		ep_type = USB_EP_INT;
++	}
++	else if (usb_endpoint_xfer_isoc(&ep->desc)) {
++		ep_type = USB_EP_ISOC;
++	}
++	else if (usb_endpoint_xfer_bulk(&ep->desc)) {
++		ep_type = USB_EP_BULK;
++	}
++	else
++		ep_type = USB_EP_CONTROL;
++
++	sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc)
++		, isTT, ep_type, (mtk_u32 *)ep);
++	if (sch_ep != NULL) {
++		kfree(sch_ep);
++	}
++	else {
++		xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n");
++	}
++#else
++	mtk_xhci_scheduler_remove_ep(xhci, udev, ep);
++#endif
++#endif
++
+ 	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
+ 			(unsigned int) ep->desc.bEndpointAddress,
+ 			udev->slot_id,
+@@ -1721,6 +1804,19 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ 	u32 new_add_flags, new_drop_flags;
+ 	struct xhci_virt_device *virt_dev;
+ 	int ret = 0;
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	struct xhci_ep_ctx *in_ep_ctx;
++#if MTK_SCH_NEW
++	struct xhci_slot_ctx *slot_ctx;
++	struct sch_ep *sch_ep;
++	int isTT;
++	int ep_type;
++	int maxp = 0;
++	int burst = 0;
++	int mult = 0;
++	int interval;
++#endif
++#endif
+ 
+ 	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+ 	if (ret <= 0) {
+@@ -1787,6 +1883,56 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+ 		return -ENOMEM;
+ 	}
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
++#if MTK_SCH_NEW
++	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
++	if ((slot_ctx->tt_info & 0xff) > 0) {
++		isTT = 1;
++	}
++	else {
++		isTT = 0;
++	}
++	if (usb_endpoint_xfer_int(&ep->desc)) {
++		ep_type = USB_EP_INT;
++	}
++	else if (usb_endpoint_xfer_isoc(&ep->desc)) {
++		ep_type = USB_EP_ISOC;
++	}
++	else if (usb_endpoint_xfer_bulk(&ep->desc)) {
++		ep_type = USB_EP_BULK;
++	}
++	else
++		ep_type = USB_EP_CONTROL;
++
++	if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH 
++		|| udev->speed == USB_SPEED_LOW) {
++		maxp = ep->desc.wMaxPacketSize & 0x7FF;
++		burst = ep->desc.wMaxPacketSize >> 11;
++		mult = 0;
++	}
++	else if (udev->speed == USB_SPEED_SUPER) {
++		maxp = ep->desc.wMaxPacketSize & 0x7FF;
++		burst = ep->ss_ep_comp.bMaxBurst;
++		mult = ep->ss_ep_comp.bmAttributes & 0x3;
++	}
++	interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff));
++	sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL);
++	if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc),
++		isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep
++		, (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) {
++		xhci_err(xhci, "[MTK] not enough bandwidth\n");
++
++		return -ENOSPC;
++	}
++#else
++	if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) {
++		xhci_err(xhci, "[MTK] not enough bandwidth\n");
++
++		return -ENOSPC;
++	}
++#endif
++#endif
+ 	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
+ 	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+ 
+@@ -4451,8 +4597,14 @@ static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+ 		u16 *timeout)
+ {
+ 	if (state == USB3_LPM_U1)
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++		if (xhci->quirks & XHCI_INTEL_HOST)
++#endif
+ 		return xhci_calculate_u1_timeout(xhci, udev, desc);
+ 	else if (state == USB3_LPM_U2)
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++		if (xhci->quirks & XHCI_INTEL_HOST)
++#endif
+ 		return xhci_calculate_u2_timeout(xhci, udev, desc);
+ 
+ 	return USB3_LPM_DISABLED;
+@@ -4837,7 +4989,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+ 	hcd->self.no_sg_constraint = 1;
+ 
+ 	/* XHCI controllers don't stop the ep queue on short packets :| */
++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ 	hcd->self.no_stop_on_short = 1;
++#endif
+ 
+ 	if (usb_hcd_is_primary_hcd(hcd)) {
+ 		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
+@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+ 		goto error;
+ 	xhci_dbg(xhci, "Reset complete\n");
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	setInitialReg();
++#endif
++
+ 	/* Set dma_mask and coherent_dma_mask to 64-bits,
+ 	 * if xHC supports 64-bit addressing */
+ 	if (HCC_64BIT_ADDR(xhci->hcc_params) &&
+@@ -4994,8 +5152,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+ MODULE_AUTHOR(DRIVER_AUTHOR);
+ MODULE_LICENSE("GPL");
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++static struct resource xhci_resouce[] = {
++    {
++        .name = "xhci-hcd",
++        .start = XHC_IO_START,
++        .end = XHC_IO_START + XHC_IO_LENGTH -1,
++        .flags = IORESOURCE_MEM,
++    }
++};
++
++static struct platform_device xhci_platform_dev = {
++	.name = "xhci-hcd",
++	.id   = -1,
++	.dev  = { 
++		.coherent_dma_mask = 0xffffffff,
++        },
++    .resource = xhci_resouce,
++};
++#endif
++
+ static int __init xhci_hcd_init(void)
+ {
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++	struct platform_device *pPlatformDev;
++
++	register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops);
++
++	u3phy_init();
++	if (u3phy_ops->u2_slew_rate_calibration) {
++                u3phy_ops->u2_slew_rate_calibration(u3phy);
++                u3phy_ops->u2_slew_rate_calibration(u3phy_p1);
++        }
++        else{
++                printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
++        }
++        u3phy_ops->init(u3phy);
++	reinitIP();
++
++	pPlatformDev = &xhci_platform_dev;
++	memset(pPlatformDev, 0, sizeof(struct platform_device));
++	pPlatformDev->name = "xhci-hcd";
++	pPlatformDev->id = -1;
++	pPlatformDev->dev.coherent_dma_mask = 0xffffffff;
++	pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask;
++    pPlatformDev->resource = xhci_resouce; 
++    pPlatformDev->num_resources = ARRAY_SIZE(xhci_resouce);
++
++	platform_device_register(&xhci_platform_dev);
++
++#endif
++
+ 	/*
+ 	 * Check the compiler generated sizes of structures that must be laid
+ 	 * out in specific ways for hardware access.
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -32,6 +32,21 @@
+ #include	"xhci-ext-caps.h"
+ #include "pci-quirks.h"
+ 
++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++#define XHC_IRQ (22 + 8)
++#define XHC_IO_START 0x1E1C0000
++#define XHC_IO_LENGTH 0x10000
++/* mtk scheduler bitmasks */
++#define BPKTS(p)	((p) & 0x3f)
++#define BCSCOUNT(p)	(((p) & 0x7) << 8)
++#define BBM(p)		((p) << 11)
++#define BOFFSET(p)	((p) & 0x3fff)
++#define BREPEAT(p)	(((p) & 0x7fff) << 16)
++#endif
++
++
++
++
+ /* xHCI PCI Configuration Registers */
+ #define XHCI_SBRN_OFFSET	(0x60)
+ 
+@@ -1582,8 +1597,12 @@ struct xhci_hcd {
+ 	/* Compliance Mode Recovery Data */
+ 	struct timer_list	comp_mode_recovery_timer;
+ 	u32			port_status_u0;
++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
++#define COMP_MODE_RCVRY_MSECS 5000
++#else
+ /* Compliance Mode Timer Triggered every 2 seconds */
+ #define COMP_MODE_RCVRY_MSECS 2000
++#endif
+ };
+ 
+ /* convert between an HCD pointer and the corresponding EHCI_HCD */
+@@ -1731,6 +1750,26 @@ void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
+ void xhci_free_command(struct xhci_hcd *xhci,
+ 		struct xhci_command *command);
+ 
++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
++/* xHCI PCI glue */
++int xhci_register_pci(void);
++void xhci_unregister_pci(void);
++#else
++static inline int xhci_register_pci(void) { return 0; }
++static inline void xhci_unregister_pci(void) {}
++#endif
++
++#if defined(CONFIG_USB_XHCI_PLATFORM) \
++	|| defined(CONFIG_USB_XHCI_PLATFORM_MODULE)
++int xhci_register_plat(void);
++void xhci_unregister_plat(void);
++#else
++static inline int xhci_register_plat(void)
++{ return 0; }
++static inline void xhci_unregister_plat(void)
++{  }
++#endif
++
+ /* xHCI host controller glue */
+ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
+ int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+--- a/drivers/usb/phy/Kconfig
++++ b/drivers/usb/phy/Kconfig
+@@ -199,6 +199,14 @@ config USB_RCAR_GEN2_PHY
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called phy-rcar-gen2-usb.
+ 
++config RALINK_USBPHY
++	bool "Ralink USB PHY controller Driver"
++	depends on MIPS && RALINK
++	select USB_PHY
++	help
++	  Enable this to support ralink USB phy controller for ralink
++	  SoCs.
++
+ config USB_ULPI
+ 	bool "Generic ULPI Transceiver Driver"
+ 	depends on ARM || ARM64
+--- a/drivers/usb/phy/Makefile
++++ b/drivers/usb/phy/Makefile
+@@ -27,3 +27,4 @@ obj-$(CONFIG_USB_RCAR_GEN2_PHY)		+= phy-rcar-gen2-usb.o
+ obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
+ obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o
+ obj-$(CONFIG_KEYSTONE_USB_PHY)		+= phy-keystone.o
++obj-$(CONFIG_RALINK_USBPHY)		+= ralink-phy.o
+--- /dev/null
++++ b/drivers/usb/phy/ralink-phy.c
+@@ -0,0 +1,193 @@
++/*
++ * Copyright (C) 2013 John Crispin <blogic at openwrt.org>
++ *
++ * based on: Renesas R-Car USB phy driver
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/usb/otg.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/module.h>
++#include <linux/reset.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++
++#define RT_SYSC_REG_SYSCFG1		0x014
++#define RT_SYSC_REG_CLKCFG1		0x030
++#define RT_SYSC_REG_USB_PHY_CFG	0x05c
++
++#define RT_RSTCTRL_UDEV		BIT(25)
++#define RT_RSTCTRL_UHST		BIT(22)
++#define RT_SYSCFG1_USB0_HOST_MODE	BIT(10)
++
++#define MT7620_CLKCFG1_UPHY0_CLK_EN	BIT(25)
++#define MT7620_CLKCFG1_UPHY1_CLK_EN	BIT(22)
++#define RT_CLKCFG1_UPHY1_CLK_EN	BIT(20)
++#define RT_CLKCFG1_UPHY0_CLK_EN	BIT(18)
++
++#define USB_PHY_UTMI_8B60M		BIT(1)
++#define UDEV_WAKEUP			BIT(0)
++
++static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
++static struct reset_control *rstdev;
++static struct reset_control *rsthost;
++static u32 phy_clk;
++
++static void usb_phy_enable(int state)
++{
++	if (state)
++		rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
++	else
++		rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
++	mdelay(100);
++}
++
++static int usb_power_on(struct usb_phy *phy)
++{
++	if (atomic_inc_return(&usb_pwr_ref) == 1) {
++		u32 t;
++
++		usb_phy_enable(1);
++
++//		reset_control_assert(rstdev);
++//		reset_control_assert(rsthost);
++
++		if (OTG_STATE_B_HOST) {
++			rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
++			if (!IS_ERR(rsthost))
++				reset_control_deassert(rsthost);
++			if (!IS_ERR(rstdev))
++				reset_control_deassert(rstdev);
++		} else {
++			rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
++			if (!IS_ERR(rstdev))
++				reset_control_deassert(rstdev);
++		}
++		mdelay(100);
++
++		t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
++		dev_info(phy->dev, "remote usb device wakeup %s\n",
++				(t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
++		if (t & USB_PHY_UTMI_8B60M)
++			dev_info(phy->dev, "UTMI 8bit 60MHz\n");
++		else
++			dev_info(phy->dev, "UTMI 16bit 30MHz\n");
++	}
++
++	return 0;
++}
++
++static void usb_power_off(struct usb_phy *phy)
++{
++	if (atomic_dec_return(&usb_pwr_ref) == 0) {
++		usb_phy_enable(0);
++		if (!IS_ERR(rstdev))
++			reset_control_assert(rstdev);
++		if (!IS_ERR(rsthost))
++			reset_control_assert(rsthost);
++	}
++}
++
++static int usb_set_host(struct usb_otg *otg, struct usb_bus *host)
++{
++	otg->gadget = NULL;
++	otg->host = host;
++
++	return 0;
++}
++
++static int usb_set_peripheral(struct usb_otg *otg,
++		struct usb_gadget *gadget)
++{
++	otg->host = NULL;
++	otg->gadget = gadget;
++
++	return 0;
++}
++
++static const struct of_device_id ralink_usbphy_dt_match[] = {
++	{ .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
++	{ .compatible = "ralink,mt7620a-usbphy", .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN | MT7620_CLKCFG1_UPHY0_CLK_EN) },
++	{},
++};
++MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match);
++
++static int usb_phy_probe(struct platform_device *pdev)
++{
++	const struct of_device_id *match;
++	struct device *dev = &pdev->dev;
++	struct usb_otg *otg;
++	struct usb_phy *phy;
++	int ret;
++
++	match = of_match_device(ralink_usbphy_dt_match, &pdev->dev);
++	phy_clk = (int) match->data;
++
++	rsthost = devm_reset_control_get(&pdev->dev, "host");
++	rstdev = devm_reset_control_get(&pdev->dev, "device");
++
++	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
++	if (!phy) {
++		dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n");
++		return -ENOMEM;
++	}
++
++	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
++	if (!otg) {
++		dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
++		return -ENOMEM;
++	}
++
++	phy->dev = dev;
++	phy->label = dev_name(dev);
++	phy->init = usb_power_on;
++	phy->shutdown = usb_power_off;
++	otg->set_host = usb_set_host;
++	otg->set_peripheral = usb_set_peripheral;
++	otg->phy = phy;
++	phy->otg = otg;
++	ret = usb_add_phy(phy, USB_PHY_TYPE_USB2);
++
++	if (ret < 0) {
++		dev_err(dev, "usb phy addition error\n");
++		return ret;
++	}
++
++	platform_set_drvdata(pdev, phy);
++
++	dev_info(&pdev->dev, "loaded\n");
++
++	return ret;
++}
++
++static int usb_phy_remove(struct platform_device *pdev)
++{
++	struct usb_phy *phy = platform_get_drvdata(pdev);
++
++	usb_remove_phy(phy);
++
++	return 0;
++}
++
++static struct platform_driver usb_phy_driver = {
++	.driver		= {
++		.owner	= THIS_MODULE,
++		.name	= "rt3xxx-usbphy",
++		.of_match_table = of_match_ptr(ralink_usbphy_dt_match),
++	},
++	.probe		= usb_phy_probe,
++	.remove		= usb_phy_remove,
++};
++
++module_platform_driver(usb_phy_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("Ralink USB phy");
++MODULE_AUTHOR("John Crispin <blogic at openwrt.org>");
-- 
1.7.9.5



_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list