[OpenWrt-Devel] [PATCH] [ar71xx] Fix duplicate tickets 14136 and 15282 (Hornet UB GPIO WPS/Reset)

Janne Cederberg janne.cederberg at gmail.com
Wed Mar 11 15:20:39 EDT 2015


I have a flash image built based on Barrier Breaker's trunk as of
today + this patch...in case you Josh or someone else is interested.

-Janne

2015-03-11 21:10 GMT+02:00 Joshua Judson Rosen <jrosen at harvestai.com>:
> On 2015-03-11 14:48, Janne Cederberg wrote:
>> This problem has existed at least since Attitude Adjustment and
>> is also present in trunk. Basically on the Hornet-UB board the
>> functionality of RESET and WPS have "switched places".
>>
>> There are two tickets about the issue at dev.openwrt.org,
>> The solution suggested on them both is incomplete though
>> and introduces the following proglem:
>>
>> Patching as suggested on #14136/#15282 will result in a situation
>> where simply pressing the RESET button on the bottom will cause
>> FACTORY RESET to be run. This is due to GPIO high/low state being
>> incorrect as a result of the above change and virtually the RESET
>> button is in the pressed-down state the entire time. When it is
>> then physically pressed, that causes the opposite, release, to be
>> triggered and since to the board it seemed that the button was
>> pressed long before it was released, the FACTORY RESET results.
>>
>> The attached patch works as expected.
>
>
> Interesting--I don't have a good excuse for why I missed that fact myself,
> but thanks a bunch for picking the issue/patch up and running with it!
>
> I'm still doing a bunch of work with the Hornet-UB devices, so I'll
> be quite delighted if this makes it into a release :)
>
> --
> "Don't be afraid to ask (λf.((λx.xx) (λr.f(rr))))."
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list