[OpenWrt-Devel] [PATCH] ramips: Fix failsafe switch workaround for RT5350 introduced in r42179.

[Vittorio G (VittGam)]

Il 10.03.2015 14:18 John Crispin ha scritto:
> hi
>
> can you send a version that has the pattern shown below please
>
> and "0 1 2 3 4 5 6" is wrong, exclude the wan port from the list please.
>
> 	John
>
>

The problem is that it's not easy to determine what number the LAN or WAN port(s) is/are. On many routers a LAN port can be 0, but on the HT-TM02 there is only one port and it is 4. So the current "0 6" is effectively soft-bricking the HT-TM02 if failsafe is needed and one doesn't have a serial adapter... That's why I proposed to just enable all ports for failsafe.

> board=$(ramips_board_name)
>
> board_config_update
> ports="0 6""
> case $board in
> my_board_name)
> 	ports="0 1 2 3 4 5 6"
> 	;;
> esac
> swconfig dev rt305x set enable_vlan 1
> swconfig dev rt305x vlan 1 set ports "$ports"
> swconfig dev rt305x port 6 set untag 0
> swconfig dev rt305x set apply 1
> vconfig add eth0 1

This needs to be better addressed somehow, without replicating the port layout here for every router that does not have port 0 exposed at all.
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel