[OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT

[Yousong Zhou]

Hi, wengbj

It's just that OpenWrt requires a Signed-off-by line for patches to be
accepted [1].  That line can be generated by option -s in command `git
format-patch -s ...'

 [1] https://dev.openwrt.org/wiki/SubmittingPatches

Regards

                yousong

On 30 January 2015 at 17:04, wengbj <fl.service at t-firefly.com> wrote:
> ---
>  target/linux/ramips/dts/FIREWRT.dts |    5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/target/linux/ramips/dts/FIREWRT.dts b/target/linux/ramips/dts/FIREWRT.dts
> index 2e5d26b..4e9e28b 100644
> --- a/target/linux/ramips/dts/FIREWRT.dts
> +++ b/target/linux/ramips/dts/FIREWRT.dts
> @@ -78,4 +78,9 @@
>                         };
>                 };
>         };
> +
> +       ethernet at 1e100000 {
> +               mtd-mac-address = <&factory 0xe000>;
> +       };
> +
>  };
> --
> 1.7.9.5
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel