[OpenWrt-Devel] fstools / always fires 'uci commit' each reboot

Bastian Bittorf bittorf at bluebottle.com
Wed Jan 28 08:46:24 EST 2015


we detected a strange problem in our community-network,
which can be tracked down to
'package/system/fstools/files/fstab.default' which is later
installed to '/etc/uci-defaults/10-fstab' including this:

[ ! -f /etc/config/fstab ] && ( block detect > /etc/config/fstab )

in our routers there is always a '/etc/config/fstab', which
means this scripts fails and later during /etc/init.d/boot
an 'uci commit' is fired because of this, see uci_apply_defaults()

the intention is, to do an 'uci commit' because some scripts have
run in /etc/uci-defaults. this is always true when scripts will
not be deleted after firstrun and causes issues here:

we autoupload a cofiguration.tgz, when something had changed in
/etc/config and because we dynamically do some configurations
during bootup with 'uci set ...' there is always an upload
triggered.

the question is here:

1)
can we change that behaviour for this single script?
(delete it during first run).

or

2)
only fire an 'uci commit' when the checksum of /etc/config has changed?

i dont opened a ticket on tracker, because this is not a real bug.

bye, bastian
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list