[OpenWrt-Devel] [RFC PATCH] mac80211: brcmfmac: separate SDIO and USB support

Zoltan HERPAI wigyori at uid0.hu
Wed Jan 14 08:22:02 EST 2015


Jose,

On Tue, 13 Jan 2015, José Vázquez wrote:

> 2015-01-13 8:46 GMT+01:00, Zoltan HERPAI <wigyori at uid0.hu>:
>> I haven't seen any flags that does SDIO_SUPPORT or something similar. It's
>> either removing "depend on USB_SUPPORT" or add dependencies for the
>> targets that'll use the SDIO part. Do you know of other approach?
>>
>> Thanks,
>> -w-
>>
> You are right: there isn't SDIO_SUPPORT flag. I suggested to delete
> sunxi dependency because maybe in the future will be support for other
> boards that belong to different targets that will need sdio support to
> make the wifi work.
> Anyway, while only sunxi based boards need it, the patch can be left
> as is to avoid confusion.

Further targets which require this package can be added later - so far 
sunxi is the only one which needs the SDIO support in brcmfmac, unless 
someone comes up with another.

sunxi has USB_SUPPORT, but I wanted to indicate that to enable the SDIO 
part, one does not need to have it, and can be extended easily.

Thanks,
-w-

>> On Tue, 13 Jan 2015, José Vázquez wrote:
>>
>>> IMHO make sdio selecton depends only on sunxi is not a good idea.
>>>
>>> 2015-01-07 20:37 GMT+01:00, Zoltan HERPAI <wigyori at uid0.hu>:
>>>> This patch will add options to select SDIO and USB support in the
>>>> brcmfmac
>>>> driver, and not tie it to only support USB. As the driver doesn't build
>>>> the host interface code into separate .ko, the required ones are
>>>> selected
>>>> via config options.
>>>>
>>>> PCIe support is not added now, can be added later. As of now, only sunxi
>>>> would use the SDIO support for the Ampak modules.
>>>>
>>>> Signed-off-by: Zoltan HERPAI <wigyori at uid0.hu>
>>>> ---
>>>> Index: package/kernel/mac80211/Makefile
>>>> ===================================================================
>>>> --- package/kernel/mac80211/Makefile	(revision 43857)
>>>> +++ package/kernel/mac80211/Makefile	(working copy)
>>>> @@ -1477,17 +1477,36 @@
>>>>
>>>>   define KernelPackage/brcmfmac
>>>>     $(call KernelPackage/mac80211/Default)
>>>> -  TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
>>>> +  TITLE:=Broadcom IEEE802.11n USB/SDIO FullMAC WLAN driver
>>>>     URL:=http://linuxwireless.org/en/users/Drivers/brcm80211
>>>> -  DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-cfg80211
>>>> + at DRIVER_11N_SUPPORT
>>>> +kmod-brcmutil
>>>> +  DEPENDS+= @(USB_SUPPORT||TARGET_sunxi) +kmod-cfg80211
>>>> + at DRIVER_11N_SUPPORT +kmod-brcmutil
>>>>
>>>> FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
>>>>     AUTOLOAD:=$(call AutoProbe,brcmfmac)
>>>>   endef
>>>>
>>>>   define KernelPackage/brcmfmac/description
>>>> - Kernel module for Broadcom IEEE802.11n USB Wireless cards
>>>> + Kernel module for Broadcom IEEE802.11n USB/SDIO Wireless cards
>>>>   endef
>>>>
>>>> +define KernelPackage/brcmfmac/config
>>>> +    if PACKAGE_kmod-brcmfmac
>>>> +
>>>> +		config PACKAGE_BRCMFMAC_SDIO
>>>> +			depends TARGET_sunxi
>>>> +			bool "Broadcom FullMAC SDIO support"
>>>> +			help
>>>> +			    Say Y if you want to enable SDIO support for the brcmfmac
>>>> driver.
>>>> +
>>>> +		config PACKAGE_BRCMFMAC_USB
>>>> +			select PACKAGE_kmod-usb-core
>>>> +			default y
>>>> +			bool "Broadcom FullMAC USB support"
>>>> +			help
>>>> +			    Say Y if you want to enable USB support for the brcmfmac driver.
>>>> +
>>>> +    endif
>>>> +endef
>>>> +
>>>>   config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m)
>>>>
>>>>   config-y:= \
>>>> @@ -1558,8 +1577,9 @@
>>>>   config-$(call config_package,brcmutil) += BRCMUTIL
>>>>   config-$(call config_package,brcmsmac) += BRCMSMAC
>>>>   config-$(call config_package,brcmfmac) += BRCMFMAC
>>>> -config-y += BRCMFMAC_USB
>>>> +config-$(CONFIG_PACKAGE_BRCMFMAC_USB) += BRCMFMAC_USB
>>>>   config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG
>>>> +config-$(CONFIG_PACKAGE_BRCMFMAC_SDIO) += BRCMFMAC_SDIO
>>>>
>>>>   config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM
>>>>
>>>> @@ -1969,12 +1989,25 @@
>>>>
>>>>   define KernelPackage/brcmfmac/install
>>>>   	$(INSTALL_DIR) $(1)/lib/firmware/brcm
>>>> +ifeq ($(CONFIG_PACKAGE_BRCMFMAC_USB),y)
>>>>   	$(INSTALL_DATA) \
>>>>   		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac43236b.bin
>>>> \
>>>>   		$(1)/lib/firmware/brcm/
>>>>   	$(INSTALL_DATA) \
>>>>   		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac43143.bin
>>>> \
>>>>   		$(1)/lib/firmware/brcm/
>>>> +endif
>>>> +ifeq ($(CONFIG_PACKAGE_BRCMFMAC_SDIO),y)
>>>> +	$(INSTALL_DATA) \
>>>> +		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac4329-sdio.bin
>>>> \
>>>> +		$(1)/lib/firmware/brcm/
>>>> +	$(INSTALL_DATA) \
>>>> +		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac4330-sdio.bin
>>>> \
>>>> +		$(1)/lib/firmware/brcm/
>>>> +	$(INSTALL_DATA) \
>>>> +		$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac43362-sdio.bin
>>>> \
>>>> +		$(1)/lib/firmware/brcm/
>>>> +endif
>>>>   endef
>>>>
>>>>   $(eval $(call KernelPackage,adm8211))
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel at lists.openwrt.org
>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>
>>>
>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list