[OpenWrt-Devel] [PATCH 3/3 v3] [Lantiq] [P2812HNUFX] Remove old P2812HNUFX dts

Sylwester Petela (ScApi) sscapi at gmail.com
Sun Jan 11 11:49:21 EST 2015


Remove unused P2812HNUFX board definition.

Signed-off-by: Sylwester Petela <sscapi at gmail.com>
---
 target/linux/lantiq/dts/P2812HNUFX.dts             | 308 ---------------------
 1 files changed, 0 insertions(+), 308 deletions(-)

diff --git a/target/linux/lantiq/dts/P2812HNUFX.dts b/target/linux/lantiq/dts/P2812HNUFX.dts
deleted file mode 100644
index 5af10d4..0000000
--- a/target/linux/lantiq/dts/P2812HNUFX.dts
+++ /dev/null
@@ -1,308 +0,0 @@
-/dts-v1/;
-
-/include/ "vr9.dtsi"
-
-/ {
-	model = "P2812HNUFX - ZyXEL P-2812HNU-Fx";
-	
-	chosen {
-		/*bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";*/
-	};
-
-	memory at 0 {
-		reg = <0x0 0x8000000>;
-	};
-	
-	fpi at 10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,fpi", "simple-bus";
-		ranges = <0x0 0x10000000 0xEEFFFFF>;
-		reg = <0x10000000 0xEF00000>;
-
-		localbus at 0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "lantiq,localbus", "simple-bus";
-
-			nand-parts at 0 {
-				compatible = "gen_nand", "lantiq,nand-xway";
-				lantiq,cs = <1>;
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition at 0 {
-					label = "u-boot";
-					reg = <0x00000 0x40000>;
-				};
-
-				partition at 40000 {
-					label = "u-boot environment";
-					reg = <0x40000 0x20000>;
-				};
-
-				partition at 60000 {
-					label = "root";
-					reg = <0x60000 0x7fa0000>;
-				};
-			};
-		};
-
-		gpio: pinmux at E100B10 {
-			compatible = "lantiq,pinctrl-xr9";
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-			
-			interrupt-parent = <&icu0>;
-			interrupts = <166 135 66 40 41 42 38>;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				gphy-leds {
-					lantiq,groups = "gphy0 led1", "gphy1 led1",
-							"gphy0 led2", "gphy1 led2";
-					lantiq,function = "gphy";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				pci {
-					lantiq,groups = "gnt1", "req1";
-					lantiq,function = "pci";
-				};
-				pci-rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				ifxhcd-rst {
-					lantiq,pins = "io33";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				nand {
-					lantiq,groups = "nand cle", "nand ale",
-							"nand rd", "nand cs1", "nand rdy";
-					lantiq,function = "ebu";
-					lantiq,pull = <1>;
-				};
-			};
-		};
-
-		eth at E108000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "lantiq,xrx200-net";
-			reg = <	0xE108000 0x3000 /* switch */
-				0xE10B100 0x70 /* mdio */
-				0xE10B1D8 0x30 /* mii */
-				0xE10B308 0x30 /* pmac */
-			>;
-			interrupt-parent = <&icu0>;
-			interrupts = <73 72>;
-
-			lan: interface at 0 {
-				compatible = "lantiq,xrx200-pdi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-				mac-address = [ 00 11 22 33 44 55 ];
-				lantiq,switch;
-
-				ethernet at 0 {
-					compatible = "lantiq,xrx200-pdi-port";
-					reg = <0>;
-					phy-mode = "rgmii";
-					phy-handle = <&phy0>;
-				};
-				ethernet at 1 {
-					compatible = "lantiq,xrx200-pdi-port";
-					reg = <1>;
-					phy-mode = "rgmii";
-					phy-handle = <&phy1>;
-				};
-				ethernet at 2 {
-					compatible = "lantiq,xrx200-pdi-port";
-					reg = <2>;
-					phy-mode = "gmii";
-					phy-handle = <&phy11>;
-				};
-				ethernet at 4 {
-					compatible = "lantiq,xrx200-pdi-port";
-					reg = <4>;
-					phy-mode = "gmii";
-					phy-handle = <&phy13>;
-				};
-				ethernet at 5 {
-					compatible = "lantiq,xrx200-pdi-port";
-					reg = <5>;
-					phy-mode = "rgmii";
-					phy-handle = <&phy5>;
-				};
-			};
-
-			mdio at 0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "lantiq,xrx200-mdio";
-				phy0: ethernet-phy at 0 {
-					reg = <0x0>;
-					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-				};
-				phy1: ethernet-phy at 1 {
-					reg = <0x1>;
-					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-				};
-				phy5: ethernet-phy at 5 {
-					reg = <0x5>;
-					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-				};
-				phy11: ethernet-phy at 11 {
-					reg = <0x11>;
-					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-				};
-				phy13: ethernet-phy at 13 {
-					reg = <0x13>;
-					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-				};
-			};
-		};
-
-		stp: stp at E100BB0 {
-			compatible = "lantiq,gpio-stp-xway";
-			reg = <0xE100BB0 0x40>;
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			lantiq,shadow = <0xffffff>;
-			lantiq,groups = <0x7>;
-			/*
-			lantiq,dsl = <0x3>;
-			lantiq,phy1 = <0x7>;
-			lantiq,phy2 = <0x7>;
-			*/
-		};
-
-		ifxhcd at E101000 {
-			status = "okay";
-			gpios = <&gpio 33 0>;
-			lantiq,portmask = <0x3>;
-		};
-
-		pci at E105400 {
-			lantiq,bus-clock = <33333333>;
-			/* lantiq,external-clock; */
-			lantiq,delay-hi = <0>; /* 0ns delay */
-			lantiq,delay-lo = <0>; /* 0.0ns delay */
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x7000 0 0 1 &icu0 29 //1 // slot 14, irq 29
-				>;
-			gpio-reset = <&gpio 21 0>;
-			req-mask = <0x1>;	/* GNT1 */
-			status = "okay";
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware = "lantiq/vr9_phy11g_a1x.bin";
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		reset {
-			label = "reset";
-			gpios = <&gpio 39 1>;
-			linux,code = <0x198>;
-		};
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 1 1>;
-			linux,code = <0xf7>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		internet2 {
-			label = "internet2";
-			gpios = <&stp 16 1>;
-		};
-		internet {
-			label = "internet";
-			gpios = <&stp 17 1>;
-		};
-		dsl {
-			label = "dsl";
-			gpios = <&stp 18 1>;
-		};
-		dsl2 {
-			label = "dsl2";
-			gpios = <&stp 19 1>;
-		};
-		wifi2 {
-			label = "wifi2";
-			gpios = <&stp 20 1>;
-		};
-		wlan {
-			label = "wifi";
-			gpios = <&stp 21 1>;
-		};
-		power2 {
-			label = "power2";
-			gpios = <&stp 22 1>;
-		};
-		power {
-			label = "power";
-			gpios = <&stp 23 1>;
-		};
-		usb1 {
-			label = "usb";
-			gpios = <&gpio 38 1>;
-		};
-		usb2 {
-			label = "usb2";
-			gpios = <&gpio 44 1>;
-		};
-		phone1 {
-			label = "phone1";
-			gpios = <&gpio 11 1>;
-		};
-		phone1warn {
-			label = "phone1warn";
-			gpios = <&gpio 12 1>;
-		};
-		phone2 {
-			label = "phone2";
-			gpios = <&gpio 28 1>;
-		};
-		phone2warn {
-			label = "phone2warn";
-			gpios = <&gpio 26 1>;
-		};
-	};
-};
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list