[OpenWrt-Devel] [PATCH] Add support for Netgear D7800

Tathagata Das tathagata at alumnux.com
Fri Dec 25 06:46:26 EST 2015


Add support for the Netgear D7800 and build appropriate sysupgrade and 
factory images.

Known issues:
. USB ports are not working
. DSL is not added

Signed-off-by: Tathagata Das <tathagata at alumnux.com>
---
  .../linux/ipq806x/base-files/etc/board.d/01_leds   |   1 +
  .../ipq806x/base-files/etc/board.d/02_network      |   1 +
  target/linux/ipq806x/base-files/lib/ipq806x.sh     |   3 +
  .../ipq806x/base-files/lib/upgrade/platform.sh     |   2 +
  target/linux/ipq806x/image/Makefile                |  13 +-
  ...dd-Netgear-Nighthawk-X4-D7800-device-tree.patch | 381 
+++++++++++++++++++++
  target/linux/ipq806x/profiles/netgear.mk           |  13 +
  7 files changed, 413 insertions(+), 1 deletion(-)
  create mode 100644 
target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch

diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds 
b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index 07b5b06..b32c1cc 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -11,6 +11,7 @@ board_config_update
  board=$(ipq806x_board_name)

  case "$board" in
+d7800 |\
  r7500)
      ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
      ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network 
b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 1302a55..6e18297 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -13,6 +13,7 @@ board=$(ipq806x_board_name)

  case "$board" in
  ap148 |\
+d7800 |\
  r7500)
      ucidef_add_switch "switch0" \
          "1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh 
b/target/linux/ipq806x/base-files/lib/ipq806x.sh
index 5b27bde..db22708 100644
--- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
+++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
@@ -17,6 +17,9 @@ ipq806x_board_detect() {
      *"AP148")
          name="ap148"
          ;;
+    *"D7800")
+        name="d7800"
+        ;;
      *"DB149")
          name="db149"
          ;;
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh 
b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index c0e19a1..2400376 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -7,6 +7,7 @@ platform_check_image() {

      case "$board" in
      AP148 |\
+    d7800 |\
      r7500)
          nand_do_platform_check $board $1
          return $?;
@@ -21,6 +22,7 @@ platform_pre_upgrade() {

      case "$board" in
      AP148 |\
+    d7800 |\
      r7500)
          nand_do_upgrade "$1"
          ;;
diff --git a/target/linux/ipq806x/image/Makefile 
b/target/linux/ipq806x/image/Makefile
index 14cf442..b880a1b 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -103,6 +103,17 @@ define Device/AP148-legacy
      BOARD_NAME := ap148
  endef

+define Device/D7800
+    $(call Device/DniImage)
+    DEVICE_DTS := qcom-ipq8064-d7800
+    KERNEL_SIZE := 2097152
+    NETGEAR_BOARD_ID := D7800
+    NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
+    BLOCKSIZE := 128KiB
+    PAGESIZE := 2048
+    BOARD_NAME := d7800
+endef
+
  define Device/DB149
      $(call Device/FitImage)
      DEVICE_DTS := qcom-ipq8064-db149
@@ -121,6 +132,6 @@ define Device/R7500
      BOARD_NAME := r7500
  endef

-TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
+TARGET_DEVICES += AP148 AP148-legacy D7800 DB149 R7500

  $(eval $(call BuildImage))
diff --git 
a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch 
b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
new file mode 100644
index 0000000..ecc1cff
--- /dev/null
+++ 
b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
@@ -0,0 +1,381 @@
+--- a/arch/arm/boot/dts/Makefile    2015-09-22 18:30:09.033530282 +0530
++++ b/arch/arm/boot/dts/Makefile    2015-09-23 17:06:44.892947581 +0530
+@@ -362,6 +362,7 @@
+     qcom-ipq8064-ap148.dtb \
+     qcom-ipq8064-db149.dtb \
+     qcom-ipq8064-r7500.dtb \
++    qcom-ipq8064-d7800.dtb \
+     qcom-msm8660-surf.dtb \
+     qcom-msm8960-cdp.dtb \
+     qcom-msm8974-sony-xperia-honami.dtb
+--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts    1970-01-01 
05:30:00.000000000 +0530
++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts    2015-09-23 
17:06:45.336947567 +0530
+@@ -0,0 +1,368 @@
++#include "qcom-ipq8064-v1.0.dtsi"
++
++#include <dt-bindings/input/input.h>
++
++/ {
++    model = "Netgear Nighthawk X4 D7800";
++    compatible = "netgear,d7800", "qcom,ipq8064";
++
++    memory at 0 {
++        reg = <0x42000000 0xe000000>;
++        device_type = "memory";
++    };
++
++    reserved-memory {
++        #address-cells = <1>;
++        #size-cells = <1>;
++        ranges;
++        rsvd at 41200000 {
++            reg = <0x41200000 0x300000>;
++            no-map;
++        };
++    };
++
++    aliases {
++        serial0 = &uart4;
++        mdio-gpio0 = &mdio0;
++    };
++
++    chosen {
++        bootargs = "rootfstype=squashfs noinitrd";
++        linux,stdout-path = "serial0:115200n8";
++    };
++
++    soc {
++        pinmux at 800000 {
++            i2c4_pins: i2c4_pinmux {
++                pins = "gpio12", "gpio13";
++                function = "gsbi4";
++                bias-disable;
++            };
++
++            pcie0_pins: pcie0_pinmux {
++                mux {
++                    pins = "gpio3";
++                    function = "pcie1_rst";
++                    drive-strength = <12>;
++                    bias-disable;
++                };
++            };
++
++            pcie1_pins: pcie1_pinmux {
++                mux {
++                    pins = "gpio48";
++                    function = "pcie2_rst";
++                    drive-strength = <12>;
++                    bias-disable;
++                };
++            };
++
++            nand_pins: nand_pins {
++                mux {
++                    pins = "gpio34", "gpio35", "gpio36",
++                           "gpio37", "gpio38", "gpio39",
++                           "gpio40", "gpio41", "gpio42",
++                           "gpio43", "gpio44", "gpio45",
++                           "gpio46", "gpio47";
++                    function = "nand";
++                    drive-strength = <10>;
++                    bias-disable;
++                };
++                pullups {
++                    pins = "gpio39";
++                    bias-pull-up;
++                };
++                hold {
++                    pins = "gpio40", "gpio41", "gpio42",
++                           "gpio43", "gpio44", "gpio45",
++                           "gpio46", "gpio47";
++                    bias-bus-hold;
++                };
++            };
++
++            mdio0_pins: mdio0_pins {
++                mux {
++                    pins = "gpio0", "gpio1";
++                    function = "gpio";
++                    drive-strength = <8>;
++                    bias-disable;
++                };
++            };
++
++            rgmii2_pins: rgmii2_pins {
++                mux {
++                    pins = "gpio27", "gpio28", "gpio29", "gpio30", 
"gpio31", "gpio32",
++                           "gpio51", "gpio52", "gpio59", "gpio60", 
"gpio61", "gpio62" ;
++                    function = "rgmii2";
++                    drive-strength = <8>;
++                    bias-disable;
++                };
++            };
++        };
++
++        gsbi at 16300000 {
++            qcom,mode = <GSBI_PROT_I2C_UART>;
++            status = "ok";
++            serial at 16340000 {
++                status = "ok";
++            };
++            /*
++             * The i2c device on gsbi4 should not be enabled.
++             * On ipq806x designs gsbi4 i2c is meant for exclusive
++             * RPM usage. Turning this on in kernel manifests as
++             * i2c failure for the RPM.
++             */
++        };
++
++        sata-phy at 1b400000 {
++            status = "ok";
++        };
++
++        sata at 29000000 {
++            status = "ok";
++        };
++
++        phy at 100f8800 {        /* USB3 port 1 HS phy */
++            status = "ok";
++        };
++
++        phy at 100f8830 {        /* USB3 port 1 SS phy */
++            status = "ok";
++        };
++
++        phy at 110f8800 {        /* USB3 port 0 HS phy */
++            status = "ok";
++        };
++
++        phy at 110f8830 {        /* USB3 port 0 SS phy */
++            status = "ok";
++        };
++
++        usb30 at 0 {
++            status = "ok";
++        };
++
++        usb30 at 1 {
++            status = "ok";
++        };
++
++        pcie0: pci at 1b500000 {
++            status = "ok";
++            reset-gpio = <&qcom_pinmux 3 0>;
++            pinctrl-0 = <&pcie0_pins>;
++            pinctrl-names = "default";
++        };
++
++        pcie1: pci at 1b700000 {
++            status = "ok";
++            reset-gpio = <&qcom_pinmux 48 0>;
++            pinctrl-0 = <&pcie1_pins>;
++            pinctrl-names = "default";
++        };
++
++        nand at 1ac00000 {
++            status = "ok";
++
++            pinctrl-0 = <&nand_pins>;
++            pinctrl-names = "default";
++
++            nand-ecc-strength = <4>;
++            nand-bus-width = <8>;
++
++            #address-cells = <1>;
++            #size-cells = <1>;
++
++            qcadata at 0 {
++                label = "qcadata";
++                reg = <0x0000000 0x0c80000>;
++                read-only;
++            };
++
++            APPSBL at c80000 {
++                label = "APPSBL";
++                reg = <0x0c80000 0x0500000>;
++                read-only;
++            };
++
++            APPSBLENV at 1180000 {
++                label = "APPSBLENV";
++                reg = <0x1180000 0x0080000>;
++                read-only;
++            };
++
++            art: art at 1200000 {
++                label = "art";
++                reg = <0x1200000 0x0140000>;
++                read-only;
++            };
++
++            artbak: art at 1340000 {
++                label = "artbak";
++                reg = <0x1340000 0x0140000>;
++                read-only;
++            };
++
++            kernel at 1480000 {
++                label = "kernel";
++                reg = <0x1480000 0x0200000>;
++            };
++
++            ubi at 1680000 {
++                label = "ubi";
++                reg = <0x1680000 0x1E00000>;
++            };
++
++            netgear at 3480000 {
++                label = "netgear";
++                reg = <0x3480000 0x4480000>;
++                read-only;
++            };
++
++            reserve at 7900000 {
++                label = "reserve";
++                reg = <0x7900000 0x0700000>;
++                read-only;
++            };
++
++            firmware at 1480000 {
++                label = "firmware";
++                reg = <0x1480000 0x2000000>;
++            };
++
++        };
++
++        mdio0: mdio {
++            compatible = "virtual,mdio-gpio";
++            #address-cells = <1>;
++            #size-cells = <0>;
++            gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
++            pinctrl-0 = <&mdio0_pins>;
++            pinctrl-names = "default";
++
++            phy0: ethernet-phy at 0 {
++                device_type = "ethernet-phy";
++                reg = <0>;
++                qca,ar8327-initvals = <
++                    0x00004 0x7600000   /* PAD0_MODE */
++                    0x00008 0x1000000   /* PAD5_MODE */
++                    0x0000c 0x80        /* PAD6_MODE */
++                    0x000e4 0xaa545     /* MAC_POWER_SEL */
++                    0x000e0 0xc74164de  /* SGMII_CTRL */
++                    0x0007c 0x4e        /* PORT0_STATUS */
++                    0x00094 0x4e        /* PORT6_STATUS */
++                    >;
++            };
++
++            phy4: ethernet-phy at 4 {
++                device_type = "ethernet-phy";
++                reg = <4>;
++            };
++        };
++
++        gmac1: ethernet at 37200000 {
++            status = "ok";
++            phy-mode = "rgmii";
++            phy-handle = <&phy4>;
++            qcom,id = <1>;
++
++            pinctrl-0 = <&rgmii2_pins>;
++            pinctrl-names = "default";
++
++            mtd-mac-address = <&art 6>;
++        };
++
++        gmac2: ethernet at 37400000 {
++            status = "ok";
++            phy-mode = "sgmii";
++            qcom,id = <2>;
++
++            mtd-mac-address = <&art 0>;
++
++            fixed-link {
++                speed = <1000>;
++                full-duplex;
++            };
++        };
++    };
++
++    gpio-keys {
++        compatible = "gpio-keys";
++
++        wifi {
++            label = "wifi";
++            gpios = <&qcom_pinmux 6 1>;
++            linux,code = <KEY_WLAN>;
++        };
++
++        reset {
++            label = "reset";
++            gpios = <&qcom_pinmux 54 1>;
++            linux,code = <KEY_RESTART>;
++        };
++
++        wps {
++            label = "wps";
++            gpios = <&qcom_pinmux 65 1>;
++            linux,code = <KEY_WPS_BUTTON>;
++        };
++    };
++
++    gpio-leds {
++        compatible = "gpio-leds";
++
++        usb1 {
++            label = "d7800:amber:usb1";
++            gpios = <&qcom_pinmux 7 0>;
++        };
++
++        usb3 {
++            label = "d7800:amber:usb3";
++            gpios = <&qcom_pinmux 8 0>;
++        };
++
++        status {
++            label = "d7800:amber:status";
++            gpios = <&qcom_pinmux 9 0>;
++        };
++
++        internet {
++            label = "d7800:white:internet";
++            gpios = <&qcom_pinmux 22 0>;
++        };
++
++        wan {
++            label = "d7800:white:wan";
++            gpios = <&qcom_pinmux 23 0>;
++        };
++
++        wps {
++            label = "d7800:white:wps";
++            gpios = <&qcom_pinmux 24 0>;
++        };
++
++        esata {
++            label = "d7800:white:esata";
++            gpios = <&qcom_pinmux 26 0>;
++        };
++
++        power {
++            label = "d7800:white:power";
++            gpios = <&qcom_pinmux 53 0>;
++            default-state = "on";
++        };
++
++        rfkill {
++            label = "d7800:white:rfkill";
++            gpios = <&qcom_pinmux 64 0>;
++        };
++
++        wifi5g {
++            label = "d7800:white:wifi5g";
++            gpios = <&qcom_pinmux 67 0>;
++        };
++    };
++};
++
++&adm_dma {
++    status = "ok";
++};
diff --git a/target/linux/ipq806x/profiles/netgear.mk 
b/target/linux/ipq806x/profiles/netgear.mk
index 3402f45..25258cd 100644
--- a/target/linux/ipq806x/profiles/netgear.mk
+++ b/target/linux/ipq806x/profiles/netgear.mk
@@ -6,6 +6,18 @@
  # See /LICENSE for more information.
  #

+define Profile/D7800
+    NAME:=Netgear Nighthawk X4 D7800
+    PACKAGES:= \
+        kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
+        kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
+        kmod-ath10k wpad-mini ath10k-firmware-qca99x0
+endef
+
+define Profile/D7800/Description
+    Package set for the Netgear Nighthawk X4 D7800.
+endef
+
  define Profile/R7500
      NAME:=Netgear Nighthawk X4 R7500
      PACKAGES:= \
@@ -17,4 +29,5 @@ endef
  define Profile/R7500/Description
      Package set for the Netgear Nighthawk X4 R7500.
  endef
+$(eval $(call Profile,D7800))
  $(eval $(call Profile,R7500))
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list