[OpenWrt-Devel] [PATCH] add support for WRTnode2P and WRTnode2R
John Crispin
blogic at openwrt.org
Thu Dec 24 03:40:13 EST 2015
Hi,
the patch is badly formatted. please read the SubmittingPatches howto.
things to look out for are
* subject prefix
* description that reflects hte actual patch content
* your signed-off line is at the end of the patch. please put it above
the tear line instead.
you should consider using "git send-email" to submit patches.
John
On 24/12/2015 08:54, xzmu at wrtnode.com wrote:
> Hi blogic
>
> this is a patch is add WRTnode2P and WRTnode2R support by OpenWrt
>
> commit d0f7a56ed622a488926bb1705686b950dea34cce
> Author: xzmu <xzmu at wrtnode.com>
> Date: Thu Dec 24 15:30:07 2015 +0800
>
> add support for WRTnode2P and WRTnode2R
> add led indicator support for WRTnode platform
>
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index d7d016b..816a1a7 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -175,6 +175,8 @@ ramips_setup_interfaces()
> hg255d | \
> rt-n14u | \
> wrtnode | \
> + wrtnode2p | \
> + wrtnode2r | \
> wt3020 | \
> ur-326n4g | \
> zbt-wa05)
> diff --git a/target/linux/ramips/base-files/etc/diag.sh
> b/target/linux/ramips/base-files/etc/diag.sh
> index a7e2501..d596b8a 100644
> --- a/target/linux/ramips/base-files/etc/diag.sh
> +++ b/target/linux/ramips/base-files/etc/diag.sh
> @@ -253,6 +253,11 @@ get_status_led() {
> zte-q7)
> status_led="zte:red:status"
> ;;
> + wrtnode2r | \
> + wrtnode2p | \
> + wrtnode)
> + status_led="wrtnode:blue:indicator"
> + ;;
> esac
> }
>
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> index 4141ddd..6c74412 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -391,6 +391,12 @@ ramips_board_detect() {
> *"WRTNODE")
> name="wrtnode"
> ;;
> + *"WRTnode2R")
> + name="wrtnode2r"
> + ;;
> + *"WRTnode2P")
> + name="wrtnode2p"
> + ;;
> *"Wansview NCS601W")
> name="ncs601w"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index 2f64d8c..0fc5c26 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -119,6 +119,8 @@ platform_check_image() {
> wr6202 |\
> wr8305rt |\
> wrtnode |\
> + wrtnode2r |\
> + wrtnode2p |\
> wt1520 |\
> wt3020 |\
> x5 |\
> diff --git a/target/linux/ramips/dts/WRTNODE2P.dts
> b/target/linux/ramips/dts/WRTNODE2P.dts
> new file mode 100644
> index 0000000..59866dd
> --- /dev/null
> +++ b/target/linux/ramips/dts/WRTNODE2P.dts
> @@ -0,0 +1,99 @@
> +/dts-v1/;
> +
> +/include/ "mt7628an.dtsi"
> +
> +/ {
> + compatible = "mediatek,wrtnode2p", "mediatek,mt7628an-soc";
> + model = "WRTnode2P";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "i2c", "gpio", "jtag";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +
> + palmbus at 10000000 {
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q256";
> + reg = <0 0>;
> + linux,modalias = "m25p80", "w25q256";
> + spi-max-frequency = <10000000>;
> + m25p,chunked-io = <32>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0x1fb0000>;
> + };
> + };
> + };
> +
> + uart1 at d00 {
> + status = "okay";
> + };
> +
> + };
> +
> + ethernet at 10100000 {
> + mtd-mac-address = <&factory 0x4>;
> + ralink,port-map = "llllw";
> + };
> +
> + sdhci at 10130000 {
> + status = "okay";
> + };
> +
> + pcie at 10140000 {
> + status = "okay";
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + indicator {
> + label = "wrtnode:blue:indicator";
> + gpios = <&gpio1 9 1>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + reset {
> + label = "reset";
> + gpios = <&gpio0 5 1>;
> + linux,code = <0x198>;
> + };
> + };
> +};
> +
> diff --git a/target/linux/ramips/dts/WRTNODE2R.dts
> b/target/linux/ramips/dts/WRTNODE2R.dts
> new file mode 100644
> index 0000000..7f383ad
> --- /dev/null
> +++ b/target/linux/ramips/dts/WRTNODE2R.dts
> @@ -0,0 +1,114 @@
> +/dts-v1/;
> +
> +/include/ "mt7628an.dtsi"
> +
> +/ {
> + compatible = "mediatek,wrtnode2r", "mediatek,mt7628an-soc";
> + model = "WRTnode2R";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "i2c", "gpio", "wled_an";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +
> + palmbus at 10000000 {
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q256";
> + reg = <0 0>;
> + linux,modalias = "m25p80", "w25q256";
> + spi-max-frequency = <10000000>;
> + m25p,chunked-io = <32>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0x1fb0000>;
> + };
> + };
> +
> +
> + spidev at 1 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "spidev";
> + reg = <1 0>;
> + linux,modalias = "spidev", "spidev";
> + spi-max-frequency = <10000000>;
> + };
> + };
> +
> + uart1 at d00 {
> + status = "okay";
> + };
> +
> + i2c at 900 {
> + status = "okay";
> + };
> +
> + };
> +
> + ethernet at 10100000 {
> + mtd-mac-address = <&factory 0x4>;
> + ralink,port-map = "llllw";
> + };
> +
> + sdhci at 10130000 {
> + status = "okay";
> + };
> +
> + pcie at 10140000 {
> + status = "okay";
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + indicator {
> + label = "wrtnode:blue:indicator";
> + gpios = <&gpio1 12 1>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + reset {
> + label = "reset";
> + gpios = <&gpio0 5 1>;
> + linux,code = <0x198>;
> + };
> + };
> +
> +};
> +
>
>
> Signed-off-by: xzmu <xzmu at wrtnode.com>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list