[OpenWrt-Devel] [Patch] ipq806x: add support for Netgear D7800

[Imre Kaloz]

On Wed, 23 Dec 2015 14:12:00 +0100, Tathagata Das <tathagata at alumnux.com>  
wrote:

<snip>

> -	r7500)
> +	r7500 |\
> +	d7800)
>  		nand_do_platform_check $board $1
>  		return $?;
>  		;;
> @@ -21,7 +22,8 @@
> 	case "$board" in
>  	AP148 |\
> -	r7500)
> +	r7500 |\
> +	d7800)
>  		nand_do_upgrade "$1"
>  		;;
>  	esac

Please follow the abc, please ;)

> Index: trunk/target/linux/ipq806x/base-files/lib/ipq806x.sh
> ===================================================================
> --- trunk/target/linux/ipq806x/base-files/lib/ipq806x.sh	(revision
> 47890)
> +++ trunk/target/linux/ipq806x/base-files/lib/ipq806x.sh	(working
> copy)
> @@ -23,6 +23,9 @@
>  	*"R7500")
>  		name="r7500"
>  		;;
> +	*"D7800")
> +		name="d7800"
> +		;;
>  	esac
> 	[ -z "$name" ] && name="unknown"

ditto

> Index: trunk/target/linux/ipq806x/base-files/etc/board.d/01_leds
> ===================================================================
> --- trunk/target/linux/ipq806x/base-files/etc/board.d/01_leds	(revision
> 47890)
> +++ trunk/target/linux/ipq806x/base-files/etc/board.d/01_leds	(working
> copy)
> @@ -11,7 +11,8 @@
>  board=$(ipq806x_board_name)
> case "$board" in
> -r7500)
> +r7500 |\
> +d7800)
>  	ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
>  	ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
>  	ucidef_set_led_netdev "wan" "WAN" "r7500:white:wan" "eth0"
> Index: trunk/target/linux/ipq806x/base-files/etc/board.d/02_network
> ===================================================================
> --- trunk/target/linux/ipq806x/base-files/etc/board.d/02_network
> (revision 47890)
> +++ trunk/target/linux/ipq806x/base-files/etc/board.d/02_network
> (working copy)
> @@ -13,7 +13,8 @@
> case "$board" in
>  ap148 |\
> -r7500)
> +r7500 |\
> +d7800)
>  	ucidef_add_switch "switch0" \
>  		"1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
>  	;;

ditto

> Index:
> trunk/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X
> 4-D7800-device-tree.patch
> ===================================================================
> ---
> trunk/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X
> 4-D7800-device-tree.patch	(revision 0)
> +++
> trunk/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X
> 4-D7800-device-tree.patch	(revision 0)
> @@ -0,0 +1,381 @@
> +--- a/arch/arm/boot/dts/Makefile	2015-09-22 18:30:09.033530282 +0530
> ++++ b/arch/arm/boot/dts/Makefile	2015-09-23 17:06:44.892947581 +0530
> +@@ -362,6 +362,7 @@
> + 	qcom-ipq8064-ap148.dtb \
> + 	qcom-ipq8064-db149.dtb \
> + 	qcom-ipq8064-r7500.dtb \
> ++	qcom-ipq8064-d7800.dtb \
> + 	qcom-msm8660-surf.dtb \
> + 	qcom-msm8960-cdp.dtb \
> + 	qcom-msm8974-sony-xperia-honami.dtb

ditto

> +--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts	1970-01-01
> 05:30:00.000000000 +0530
> ++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts	2015-09-23
> 17:06:45.336947567 +0530
> +@@ -0,0 +1,368 @@

This should be qcom-ipq8064-netgear-d7800.dts

<snip>

> ++	chosen {
> ++		bootargs = "rootfstype=squashfs noinitrd";

I doubt this is needed.



Imre
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel