[OpenWrt-Devel] [PATCH 2/3] initial support for TP-Link Archer C2600
John Crispin
blogic at openwrt.org
Wed Dec 23 08:07:49 EST 2015
Hi,
could you please resend the patches with the following changes
* prefix each one with "ipq806x: "
* dont copy paste the same subject for all 3 patches but describe what
is in the patch please.
John
On 17/12/2015 13:35, Josh Bendavid wrote:
> The device tree file is similar to the current ap148 dts, with sata and nand removed, and buttons/led's added.
>
> Signed-off-by: Josh Bendavid <joshbendavid at gmail.com>
>
> ---
> ...qcom-add-TP-Link-Archer-C2600-device-tree.patch | 300 +++++++++++++++++++++
> ...qcom-add-TP-Link-Archer-C2600-device-tree.patch | 300 +++++++++++++++++++++
> 2 files changed, 600 insertions(+)
> create mode 100644 target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
> create mode 100644 target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
>
> diff --git a/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch b/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
> new file mode 100644
> index 0000000..536ae57
> --- /dev/null
> +++ b/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
> @@ -0,0 +1,300 @@
> +diff -urN a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> +--- a/arch/arm/boot/dts/Makefile 2015-11-25 22:51:15.148899604 +0100
> ++++ b/arch/arm/boot/dts/Makefile 2015-12-06 14:33:31.092396982 +0100
> +@@ -362,6 +362,7 @@
> + qcom-ipq8064-ap148.dtb \
> + qcom-ipq8064-db149.dtb \
> + qcom-ipq8064-r7500.dtb \
> ++ qcom-ipq8064-c2600.dtb \
> + qcom-msm8660-surf.dtb \
> + qcom-msm8960-cdp.dtb \
> + qcom-msm8974-sony-xperia-honami.dtb
> +diff -urN a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
> +--- a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 1970-01-01 01:00:00.000000000 +0100
> ++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 2015-12-06 14:20:05.152365670 +0100
> +@@ -0,0 +1,285 @@
> ++#include "qcom-ipq8064-v1.0.dtsi"
> ++#include <dt-bindings/input/input.h>
> ++
> ++/ {
> ++ model = "TP-Link Archer C2600";
> ++ compatible = "tplink,c2600", "qcom,ipq8064";
> ++
> ++ memory at 0 {
> ++ reg = <0x42000000 0x1e000000>;
> ++ device_type = "memory";
> ++ };
> ++
> ++ reserved-memory {
> ++ #address-cells = <1>;
> ++ #size-cells = <1>;
> ++ ranges;
> ++ rsvd at 41200000 {
> ++ reg = <0x41200000 0x300000>;
> ++ no-map;
> ++ };
> ++ };
> ++
> ++ aliases {
> ++ serial0 = &uart4;
> ++ mdio-gpio0 = &mdio0;
> ++ };
> ++
> ++ chosen {
> ++ linux,stdout-path = "serial0:115200n8";
> ++ };
> ++
> ++ soc {
> ++ pinmux at 800000 {
> ++ i2c4_pins: i2c4_pinmux {
> ++ pins = "gpio12", "gpio13";
> ++ function = "gsbi4";
> ++ bias-disable;
> ++ };
> ++
> ++ spi_pins: spi_pins {
> ++ mux {
> ++ pins = "gpio18", "gpio19", "gpio21";
> ++ function = "gsbi5";
> ++ drive-strength = <10>;
> ++ bias-none;
> ++ };
> ++ };
> ++
> ++ nand_pins: nand_pins {
> ++ mux {
> ++ pins = "gpio34", "gpio35", "gpio36",
> ++ "gpio37", "gpio38", "gpio39",
> ++ "gpio40", "gpio41", "gpio42",
> ++ "gpio43", "gpio44", "gpio45",
> ++ "gpio46", "gpio47";
> ++ function = "nand";
> ++ drive-strength = <10>;
> ++ bias-disable;
> ++ };
> ++
> ++ pullups {
> ++ pins = "gpio39";
> ++ bias-pull-up;
> ++ };
> ++
> ++ hold {
> ++ pins = "gpio40", "gpio41", "gpio42",
> ++ "gpio43", "gpio44", "gpio45",
> ++ "gpio46", "gpio47";
> ++ bias-bus-hold;
> ++ };
> ++ };
> ++
> ++ mdio0_pins: mdio0_pins {
> ++ mux {
> ++ pins = "gpio0", "gpio1";
> ++ function = "gpio";
> ++ drive-strength = <8>;
> ++ bias-disable;
> ++ };
> ++ };
> ++
> ++ rgmii2_pins: rgmii2_pins {
> ++ mux {
> ++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
> ++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
> ++ function = "rgmii2";
> ++ drive-strength = <8>;
> ++ bias-disable;
> ++ };
> ++ };
> ++ };
> ++
> ++ gsbi at 16300000 {
> ++ qcom,mode = <GSBI_PROT_I2C_UART>;
> ++ status = "ok";
> ++ serial at 16340000 {
> ++ status = "ok";
> ++ };
> ++ /*
> ++ * The i2c device on gsbi4 should not be enabled.
> ++ * On ipq806x designs gsbi4 i2c is meant for exclusive
> ++ * RPM usage. Turning this on in kernel manifests as
> ++ * i2c failure for the RPM.
> ++ */
> ++ };
> ++
> ++ gsbi5: gsbi at 1a200000 {
> ++ qcom,mode = <GSBI_PROT_SPI>;
> ++ status = "ok";
> ++
> ++ spi4: spi at 1a280000 {
> ++ status = "ok";
> ++ spi-max-frequency = <50000000>;
> ++
> ++ pinctrl-0 = <&spi_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ cs-gpios = <&qcom_pinmux 20 0>;
> ++
> ++ flash: m25p80 at 0 {
> ++ compatible = "s25fl256s1";
> ++ #address-cells = <1>;
> ++ #size-cells = <1>;
> ++ spi-max-frequency = <50000000>;
> ++ reg = <0>;
> ++
> ++ linux,part-probe = "qcom-smem";
> ++ };
> ++ };
> ++ };
> ++
> ++ phy at 100f8800 { /* USB3 port 1 HS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy at 100f8830 { /* USB3 port 1 SS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy at 110f8800 { /* USB3 port 0 HS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy at 110f8830 { /* USB3 port 0 SS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ usb30 at 0 {
> ++ status = "ok";
> ++ };
> ++
> ++ usb30 at 1 {
> ++ status = "ok";
> ++ };
> ++
> ++ pcie0: pci at 1b500000 {
> ++ status = "ok";
> ++ phy-tx0-term-offset = <7>;
> ++ };
> ++
> ++ pcie1: pci at 1b700000 {
> ++ status = "ok";
> ++ phy-tx0-term-offset = <7>;
> ++ };
> ++
> ++ mdio0: mdio {
> ++ compatible = "virtual,mdio-gpio";
> ++ #address-cells = <1>;
> ++ #size-cells = <0>;
> ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
> ++ pinctrl-0 = <&mdio0_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ phy0: ethernet-phy at 0 {
> ++ device_type = "ethernet-phy";
> ++ reg = <0>;
> ++ qca,ar8327-initvals = <
> ++ 0x00004 0x7600000 /* PAD0_MODE */
> ++ 0x00008 0x1000000 /* PAD5_MODE */
> ++ 0x0000c 0x80 /* PAD6_MODE */
> ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */
> ++ 0x000e0 0xc74164de /* SGMII_CTRL */
> ++ 0x0007c 0x4e /* PORT0_STATUS */
> ++ 0x00094 0x4e /* PORT6_STATUS */
> ++ >;
> ++ };
> ++
> ++ phy4: ethernet-phy at 4 {
> ++ device_type = "ethernet-phy";
> ++ reg = <4>;
> ++ };
> ++ };
> ++
> ++ gmac1: ethernet at 37200000 {
> ++ status = "ok";
> ++ phy-mode = "rgmii";
> ++ qcom,id = <1>;
> ++
> ++ pinctrl-0 = <&rgmii2_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ fixed-link {
> ++ speed = <1000>;
> ++ full-duplex;
> ++ };
> ++ };
> ++
> ++ gmac2: ethernet at 37400000 {
> ++ status = "ok";
> ++ phy-mode = "sgmii";
> ++ qcom,id = <2>;
> ++
> ++ fixed-link {
> ++ speed = <1000>;
> ++ full-duplex;
> ++ };
> ++ };
> ++ };
> ++
> ++ gpio-keys {
> ++ compatible = "gpio-keys";
> ++
> ++ wifi {
> ++ label = "wifi";
> ++ gpios = <&qcom_pinmux 49 1>;
> ++ linux,code = <KEY_WLAN>;
> ++ };
> ++
> ++ reset {
> ++ label = "reset";
> ++ gpios = <&qcom_pinmux 64 1>;
> ++ linux,code = <KEY_RESTART>;
> ++ };
> ++
> ++ wps {
> ++ label = "wps";
> ++ gpios = <&qcom_pinmux 65 1>;
> ++ linux,code = <KEY_WPS_BUTTON>;
> ++ };
> ++ ledgeneral {
> ++ label = "ledgeneral";
> ++ gpios = <&qcom_pinmux 16 1>;
> ++ linux,code = <KEY_DOLLAR>;
> ++ };
> ++ };
> ++
> ++ gpio-leds {
> ++ compatible = "gpio-leds";
> ++
> ++ lan {
> ++ label = "lan:blue";
> ++ gpios = <&qcom_pinmux 6 0>;
> ++ };
> ++ usb4 {
> ++ label = "usb_4:blue";
> ++ gpios = <&qcom_pinmux 7 0>;
> ++ };
> ++ usb2 {
> ++ label = "usb_2:blue";
> ++ gpios = <&qcom_pinmux 8 0>;
> ++ };
> ++ wps {
> ++ label = "wps:blue";
> ++ gpios = <&qcom_pinmux 9 0>;
> ++ };
> ++ wan_blue {
> ++ label = "wan:blue";
> ++ gpios = <&qcom_pinmux 33 1>;
> ++ };
> ++ status {
> ++ label = "status:blue";
> ++ gpios = <&qcom_pinmux 53 0>;
> ++ default-state = "on";
> ++ };
> ++ ledgnr {
> ++ label = "ledgnr:blue";
> ++ gpios = <&qcom_pinmux 66 0>;
> ++ };
> ++ };
> ++};
> ++
> ++&adm_dma {
> ++ status = "ok";
> ++};
> diff --git a/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch b/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
> new file mode 100644
> index 0000000..ada5254
> --- /dev/null
> +++ b/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
> @@ -0,0 +1,300 @@
> +diff -urN a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> +--- a/arch/arm/boot/dts/Makefile 2015-11-25 22:51:15.148899604 +0100
> ++++ b/arch/arm/boot/dts/Makefile 2015-12-06 14:33:31.092396982 +0100
> +@@ -453,6 +453,7 @@
> + qcom-ipq8064-ap148.dtb \
> + qcom-ipq8064-db149.dtb \
> + qcom-ipq8064-r7500.dtb \
> ++ qcom-ipq8064-c2600.dtb \
> + qcom-msm8660-surf.dtb \
> + qcom-msm8960-cdp.dtb \
> + qcom-msm8974-sony-xperia-honami.dtb
> +diff -urN a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
> +--- a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 1970-01-01 01:00:00.000000000 +0100
> ++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 2015-12-06 14:20:05.152365670 +0100
> +@@ -0,0 +1,285 @@
> ++#include "qcom-ipq8064-v1.0.dtsi"
> ++#include <dt-bindings/input/input.h>
> ++
> ++/ {
> ++ model = "TP-Link Archer C2600";
> ++ compatible = "tplink,c2600", "qcom,ipq8064";
> ++
> ++ memory at 0 {
> ++ reg = <0x42000000 0x1e000000>;
> ++ device_type = "memory";
> ++ };
> ++
> ++ reserved-memory {
> ++ #address-cells = <1>;
> ++ #size-cells = <1>;
> ++ ranges;
> ++ rsvd at 41200000 {
> ++ reg = <0x41200000 0x300000>;
> ++ no-map;
> ++ };
> ++ };
> ++
> ++ aliases {
> ++ serial0 = &uart4;
> ++ mdio-gpio0 = &mdio0;
> ++ };
> ++
> ++ chosen {
> ++ linux,stdout-path = "serial0:115200n8";
> ++ };
> ++
> ++ soc {
> ++ pinmux at 800000 {
> ++ i2c4_pins: i2c4_pinmux {
> ++ pins = "gpio12", "gpio13";
> ++ function = "gsbi4";
> ++ bias-disable;
> ++ };
> ++
> ++ spi_pins: spi_pins {
> ++ mux {
> ++ pins = "gpio18", "gpio19", "gpio21";
> ++ function = "gsbi5";
> ++ drive-strength = <10>;
> ++ bias-none;
> ++ };
> ++ };
> ++
> ++ nand_pins: nand_pins {
> ++ mux {
> ++ pins = "gpio34", "gpio35", "gpio36",
> ++ "gpio37", "gpio38", "gpio39",
> ++ "gpio40", "gpio41", "gpio42",
> ++ "gpio43", "gpio44", "gpio45",
> ++ "gpio46", "gpio47";
> ++ function = "nand";
> ++ drive-strength = <10>;
> ++ bias-disable;
> ++ };
> ++
> ++ pullups {
> ++ pins = "gpio39";
> ++ bias-pull-up;
> ++ };
> ++
> ++ hold {
> ++ pins = "gpio40", "gpio41", "gpio42",
> ++ "gpio43", "gpio44", "gpio45",
> ++ "gpio46", "gpio47";
> ++ bias-bus-hold;
> ++ };
> ++ };
> ++
> ++ mdio0_pins: mdio0_pins {
> ++ mux {
> ++ pins = "gpio0", "gpio1";
> ++ function = "gpio";
> ++ drive-strength = <8>;
> ++ bias-disable;
> ++ };
> ++ };
> ++
> ++ rgmii2_pins: rgmii2_pins {
> ++ mux {
> ++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
> ++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
> ++ function = "rgmii2";
> ++ drive-strength = <8>;
> ++ bias-disable;
> ++ };
> ++ };
> ++ };
> ++
> ++ gsbi at 16300000 {
> ++ qcom,mode = <GSBI_PROT_I2C_UART>;
> ++ status = "ok";
> ++ serial at 16340000 {
> ++ status = "ok";
> ++ };
> ++ /*
> ++ * The i2c device on gsbi4 should not be enabled.
> ++ * On ipq806x designs gsbi4 i2c is meant for exclusive
> ++ * RPM usage. Turning this on in kernel manifests as
> ++ * i2c failure for the RPM.
> ++ */
> ++ };
> ++
> ++ gsbi5: gsbi at 1a200000 {
> ++ qcom,mode = <GSBI_PROT_SPI>;
> ++ status = "ok";
> ++
> ++ spi4: spi at 1a280000 {
> ++ status = "ok";
> ++ spi-max-frequency = <50000000>;
> ++
> ++ pinctrl-0 = <&spi_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ cs-gpios = <&qcom_pinmux 20 0>;
> ++
> ++ flash: m25p80 at 0 {
> ++ compatible = "s25fl256s1";
> ++ #address-cells = <1>;
> ++ #size-cells = <1>;
> ++ spi-max-frequency = <50000000>;
> ++ reg = <0>;
> ++
> ++ linux,part-probe = "qcom-smem";
> ++ };
> ++ };
> ++ };
> ++
> ++ phy at 100f8800 { /* USB3 port 1 HS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy at 100f8830 { /* USB3 port 1 SS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy at 110f8800 { /* USB3 port 0 HS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ phy at 110f8830 { /* USB3 port 0 SS phy */
> ++ status = "ok";
> ++ };
> ++
> ++ usb30 at 0 {
> ++ status = "ok";
> ++ };
> ++
> ++ usb30 at 1 {
> ++ status = "ok";
> ++ };
> ++
> ++ pcie0: pci at 1b500000 {
> ++ status = "ok";
> ++ phy-tx0-term-offset = <7>;
> ++ };
> ++
> ++ pcie1: pci at 1b700000 {
> ++ status = "ok";
> ++ phy-tx0-term-offset = <7>;
> ++ };
> ++
> ++ mdio0: mdio {
> ++ compatible = "virtual,mdio-gpio";
> ++ #address-cells = <1>;
> ++ #size-cells = <0>;
> ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
> ++ pinctrl-0 = <&mdio0_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ phy0: ethernet-phy at 0 {
> ++ device_type = "ethernet-phy";
> ++ reg = <0>;
> ++ qca,ar8327-initvals = <
> ++ 0x00004 0x7600000 /* PAD0_MODE */
> ++ 0x00008 0x1000000 /* PAD5_MODE */
> ++ 0x0000c 0x80 /* PAD6_MODE */
> ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */
> ++ 0x000e0 0xc74164de /* SGMII_CTRL */
> ++ 0x0007c 0x4e /* PORT0_STATUS */
> ++ 0x00094 0x4e /* PORT6_STATUS */
> ++ >;
> ++ };
> ++
> ++ phy4: ethernet-phy at 4 {
> ++ device_type = "ethernet-phy";
> ++ reg = <4>;
> ++ };
> ++ };
> ++
> ++ gmac1: ethernet at 37200000 {
> ++ status = "ok";
> ++ phy-mode = "rgmii";
> ++ qcom,id = <1>;
> ++
> ++ pinctrl-0 = <&rgmii2_pins>;
> ++ pinctrl-names = "default";
> ++
> ++ fixed-link {
> ++ speed = <1000>;
> ++ full-duplex;
> ++ };
> ++ };
> ++
> ++ gmac2: ethernet at 37400000 {
> ++ status = "ok";
> ++ phy-mode = "sgmii";
> ++ qcom,id = <2>;
> ++
> ++ fixed-link {
> ++ speed = <1000>;
> ++ full-duplex;
> ++ };
> ++ };
> ++ };
> ++
> ++ gpio-keys {
> ++ compatible = "gpio-keys";
> ++
> ++ wifi {
> ++ label = "wifi";
> ++ gpios = <&qcom_pinmux 49 1>;
> ++ linux,code = <KEY_WLAN>;
> ++ };
> ++
> ++ reset {
> ++ label = "reset";
> ++ gpios = <&qcom_pinmux 64 1>;
> ++ linux,code = <KEY_RESTART>;
> ++ };
> ++
> ++ wps {
> ++ label = "wps";
> ++ gpios = <&qcom_pinmux 65 1>;
> ++ linux,code = <KEY_WPS_BUTTON>;
> ++ };
> ++ ledgeneral {
> ++ label = "ledgeneral";
> ++ gpios = <&qcom_pinmux 16 1>;
> ++ linux,code = <KEY_DOLLAR>;
> ++ };
> ++ };
> ++
> ++ gpio-leds {
> ++ compatible = "gpio-leds";
> ++
> ++ lan {
> ++ label = "lan:blue";
> ++ gpios = <&qcom_pinmux 6 0>;
> ++ };
> ++ usb4 {
> ++ label = "usb_4:blue";
> ++ gpios = <&qcom_pinmux 7 0>;
> ++ };
> ++ usb2 {
> ++ label = "usb_2:blue";
> ++ gpios = <&qcom_pinmux 8 0>;
> ++ };
> ++ wps {
> ++ label = "wps:blue";
> ++ gpios = <&qcom_pinmux 9 0>;
> ++ };
> ++ wan_blue {
> ++ label = "wan:blue";
> ++ gpios = <&qcom_pinmux 33 1>;
> ++ };
> ++ status {
> ++ label = "status:blue";
> ++ gpios = <&qcom_pinmux 53 0>;
> ++ default-state = "on";
> ++ };
> ++ ledgnr {
> ++ label = "ledgnr:blue";
> ++ gpios = <&qcom_pinmux 66 0>;
> ++ };
> ++ };
> ++};
> ++
> ++&adm_dma {
> ++ status = "ok";
> ++};
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list