[OpenWrt-Devel] [PATCH 09/10] imx6: fix device-tree mac address assignment for ventana sky2/eth1

Pushpal Sidhu psidhu at gateworks.com
Mon Dec 21 17:25:19 EST 2015


Some Ventana boards have a Marvell sky2 GigE controller as eth1 however
assigning the mac address through device-tree is difficult because the
PCI slot can move around depending on board configuration and slot population.

To work around this we add a patch to the sky2 driver to allow accessing its
mac address via a device-tree alias.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu at gateworks.com>
---
 .../208-sky2-allow-mac-to-come-from-dt.patch       | 30 ++++++++++++++++++++++
 .../209-ARM-imx-ventana-add-sky2-alias.patch       | 24 +++++++++++++++++
 2 files changed, 54 insertions(+)
 create mode 100644 target/linux/imx6/patches-4.3/208-sky2-allow-mac-to-come-from-dt.patch
 create mode 100644 target/linux/imx6/patches-4.3/209-ARM-imx-ventana-add-sky2-alias.patch

diff --git a/target/linux/imx6/patches-4.3/208-sky2-allow-mac-to-come-from-dt.patch b/target/linux/imx6/patches-4.3/208-sky2-allow-mac-to-come-from-dt.patch
new file mode 100644
index 0000000..7a29846
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/208-sky2-allow-mac-to-come-from-dt.patch
@@ -0,0 +1,30 @@
+Index: linux-4.3/drivers/net/ethernet/marvell/sky2.c
+===================================================================
+--- linux-4.3.orig/drivers/net/ethernet/marvell/sky2.c	2015-11-01 16:05:25.000000000 -0800
++++ linux-4.3/drivers/net/ethernet/marvell/sky2.c	2015-12-18 10:39:44.983158318 -0800
+@@ -4812,7 +4812,24 @@
+ 	 * 1) from device tree data
+ 	 * 2) from internal registers set by bootloader
+ 	 */
+-	iap = of_get_mac_address(hw->pdev->dev.of_node);
++
++	iap = NULL;
++	if (IS_ENABLED(CONFIG_OF)) {
++		struct device_node *np;
++		np = of_find_node_by_path("/aliases");
++		if (np) {
++			const char *path = of_get_property(np, "sky2", NULL);
++			if (path)
++				np = of_find_node_by_path(path);
++			if (np)
++				path = of_get_mac_address(np);
++			if (path)
++				iap = (unsigned char *) path;
++		}
++	}
++
++	if (!iap)
++		iap = of_get_mac_address(hw->pdev->dev.of_node);
+ 	if (iap)
+ 		memcpy(dev->dev_addr, iap, ETH_ALEN);
+ 	else
diff --git a/target/linux/imx6/patches-4.3/209-ARM-imx-ventana-add-sky2-alias.patch b/target/linux/imx6/patches-4.3/209-ARM-imx-ventana-add-sky2-alias.patch
new file mode 100644
index 0000000..7377ce3
--- /dev/null
+++ b/target/linux/imx6/patches-4.3/209-ARM-imx-ventana-add-sky2-alias.patch
@@ -0,0 +1,24 @@
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:39:44.959158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:43:21.000000000 -0800
+@@ -15,6 +15,7 @@
+ 	/* these are used by bootloader for disabling nodes */
+ 	aliases {
+ 		ethernet1 = &eth1;
++		sky2 = &eth1;
+ 		led0 = &led0;
+ 		led1 = &led1;
+ 		led2 = &led2;
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:39:44.959158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:21.000000000 -0800
+@@ -15,6 +15,7 @@
+ 	/* these are used by bootloader for disabling nodes */
+ 	aliases {
+ 		ethernet1 = &eth1;
++		sky2 = &eth1;
+ 		led0 = &led0;
+ 		led1 = &led1;
+ 		led2 = &led2;
-- 
2.6.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list