[OpenWrt-Devel] [PATCH 2/3] ar71xx: add support for QCA956x ethernet
Roman Yeryomin
leroi.lists at gmail.com
Sat Dec 19 20:10:09 EST 2015
Signed-off-by: Roman Yeryomin <roman at advem.lv>
---
...PS-ath79-add-support-for-QCA956x-ethernet.patch | 166 +++++++++++++++++++++
1 file changed, 166 insertions(+)
create mode 100644 target/linux/ar71xx/patches-4.1/622-MIPS-ath79-add-support-for-QCA956x-ethernet.patch
diff --git a/target/linux/ar71xx/patches-4.1/622-MIPS-ath79-add-support-for-QCA956x-ethernet.patch b/target/linux/ar71xx/patches-4.1/622-MIPS-ath79-add-support-for-QCA956x-ethernet.patch
new file mode 100644
index 0000000..6a6a2e4
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.1/622-MIPS-ath79-add-support-for-QCA956x-ethernet.patch
@@ -0,0 +1,166 @@
+--- a/arch/mips/ath79/dev-eth.c
++++ b/arch/mips/ath79/dev-eth.c
+@@ -198,7 +198,6 @@ void __init ath79_register_mdio(unsigned
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ case ATH79_SOC_QCA9533:
+- case ATH79_SOC_QCA9561:
+ case ATH79_SOC_TP9343:
+ mdio_dev = &ath79_mdio1_device;
+ mdio_data = &ath79_mdio1_data;
+@@ -209,6 +208,7 @@ void __init ath79_register_mdio(unsigned
+ case ATH79_SOC_AR9344:
+ case ATH79_SOC_QCA9556:
+ case ATH79_SOC_QCA9558:
++ case ATH79_SOC_QCA956X:
+ if (id == 0) {
+ mdio_dev = &ath79_mdio0_device;
+ mdio_data = &ath79_mdio0_data;
+@@ -258,7 +258,6 @@ void __init ath79_register_mdio(unsigned
+ break;
+
+ case ATH79_SOC_QCA9533:
+- case ATH79_SOC_QCA9561:
+ case ATH79_SOC_TP9343:
+ mdio_data->builtin_switch = 1;
+ break;
+@@ -268,6 +267,11 @@ void __init ath79_register_mdio(unsigned
+ mdio_data->is_ar934x = 1;
+ break;
+
++ case ATH79_SOC_QCA956X:
++ if (id == 1)
++ mdio_data->builtin_switch = 1;
++ break;
++
+ default:
+ break;
+ }
+@@ -387,6 +391,16 @@ static void qca955x_set_speed_sgmii(int
+ iounmap(base);
+ }
+
++static void qca956x_set_speed_sgmii(int speed)
++{
++ void __iomem *base;
++ u32 val = ath79_get_eth_pll(0, speed);
++
++ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++ __raw_writel(val, base + QCA955X_PLL_ETH_SGMII_CONTROL_REG);
++ iounmap(base);
++}
++
+ static void ath79_set_speed_dummy(int speed)
+ {
+ }
+@@ -517,6 +531,10 @@ struct ag71xx_switch_platform_data ath79
+ #define AR934X_PLL_VAL_100 0x00000101
+ #define AR934X_PLL_VAL_10 0x00001616
+
++#define QCA956X_PLL_VAL_1000 0x03000000
++#define QCA956X_PLL_VAL_100 0x00000101
++#define QCA956X_PLL_VAL_10 0x00001919
++
+ static void __init ath79_init_eth_pll_data(unsigned int id)
+ {
+ struct ath79_eth_pll_data *pll_data;
+@@ -575,13 +593,18 @@ static void __init ath79_init_eth_pll_da
+ case ATH79_SOC_QCA9533:
+ case ATH79_SOC_QCA9556:
+ case ATH79_SOC_QCA9558:
+- case ATH79_SOC_QCA9561:
+ case ATH79_SOC_TP9343:
+ pll_10 = AR934X_PLL_VAL_10;
+ pll_100 = AR934X_PLL_VAL_100;
+ pll_1000 = AR934X_PLL_VAL_1000;
+ break;
+
++ case ATH79_SOC_QCA956X:
++ pll_10 = QCA956X_PLL_VAL_10;
++ pll_100 = QCA956X_PLL_VAL_100;
++ pll_1000 = QCA956X_PLL_VAL_1000;
++ break;
++
+ default:
+ BUG();
+ }
+@@ -656,6 +679,7 @@ static int __init ath79_setup_phy_if_mod
+
+ case ATH79_SOC_QCA9556:
+ case ATH79_SOC_QCA9558:
++ case ATH79_SOC_QCA956X:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_RGMII:
+@@ -666,11 +690,6 @@ static int __init ath79_setup_phy_if_mod
+ }
+ break;
+
+- case ATH79_SOC_QCA9561:
+- if (!pdata->phy_if_mode)
+- pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
+- break;
+-
+ default:
+ BUG();
+ }
+@@ -699,7 +718,7 @@ static int __init ath79_setup_phy_if_mod
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+- case ATH79_SOC_QCA9561:
++ case ATH79_SOC_QCA956X:
+ case ATH79_SOC_TP9343:
+ pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ break;
+@@ -1032,7 +1051,6 @@ void __init ath79_register_eth(unsigned
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+- case ATH79_SOC_QCA9561:
+ case ATH79_SOC_TP9343:
+ if (id == 0) {
+ pdata->reset_bit = AR933X_RESET_GE0_MAC |
+@@ -1100,6 +1118,34 @@ void __init ath79_register_eth(unsigned
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
++ case ATH79_SOC_QCA956X:
++ if (id == 0) {
++ pdata->reset_bit = QCA955X_RESET_GE0_MAC |
++ QCA955X_RESET_GE0_MDIO;
++ if (pdata->phy_if_mode == PHY_INTERFACE_MODE_SGMII)
++ pdata->set_speed = qca956x_set_speed_sgmii;
++ else
++ /* FIXME */
++ pdata->set_speed = ath79_set_speed_dummy;
++ } else {
++ pdata->reset_bit = QCA955X_RESET_GE1_MAC |
++ QCA955X_RESET_GE1_MDIO;
++ /* FIXME */
++ pdata->set_speed = ath79_set_speed_dummy;
++ }
++
++ pdata->ddr_flush = ath79_ddr_no_flush;
++ pdata->has_gbit = 1;
++ pdata->is_ar724x = 1;
++
++ if (!pdata->fifo_cfg1)
++ pdata->fifo_cfg1 = 0x0010ffff;
++ if (!pdata->fifo_cfg2)
++ pdata->fifo_cfg2 = 0x015500aa;
++ if (!pdata->fifo_cfg3)
++ pdata->fifo_cfg3 = 0x01f00140;
++ break;
++
+ default:
+ BUG();
+ }
+@@ -1140,7 +1186,6 @@ void __init ath79_register_eth(unsigned
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ case ATH79_SOC_QCA9533:
+- case ATH79_SOC_QCA9561:
+ case ATH79_SOC_TP9343:
+ pdata->mii_bus_dev = &ath79_mdio1_device.dev;
+ break;
--
2.5.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list