[OpenWrt-Devel] Huawei hg556a ralink eeprom bug ?

Soulkey chokyeung at yahoo.com
Tue Dec 8 01:23:20 EST 2015


[  76.724897] NET: Registered protocol family 24 
[  76.795698] PCI: Enabling device 0000:00:01.0 (0000 -> 0002) 
[  76.803518] rt2800pci 0000:00:01.0: failed to load eeprom property 
[  76.809963] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'rt2x00.eeprom'. 
[  76.820564] rt2800pci 0000:00:01.0: Direct firmware load for rt2x00.eeprom failed with error -2 
[  76.829595] rt2800pci 0000:00:01.0: Falling back to user helper 
[  83.235050] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected 
[  83.243146] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected 
[  83.251793] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' 
[  89.653747] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 
[  91.132554] eth0: link UP - 100/full - flow control off 
[  91.146204] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
[  102.639205] device eth0.1 entered promiscuous mode 
[  102.644225] device eth0 entered promiscuous mode 
[  102.684722] br-lan: port 1(eth0.1) entered forwarding state 
[  102.690589] br-lan: port 1(eth0.1) entered forwarding state 
[  103.732202] eth0: link UP - 100/full - flow control off 
[  104.694171] br-lan: port 1(eth0.1) entered forwarding state 
[  108.587444] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' 
[  109.148045] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 
[  109.281432] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 




I got this log in the firmware from Chaos Calmer 15.05, 
and it would lead to different machines have the same WIFI MAC. 

So, how to solve it ? 

Thank you very much.
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list