[OpenWrt-Devel] [PATCH v6 5/6] ar71xx: scan nand ubi partition for ath9k eeprom files

Yousong Zhou yszhou4tech at gmail.com
Mon Dec 7 10:42:37 EST 2015


Am 07.12.2015 22:12 schrieb "Chris Blake" <chrisrblake93 at gmail.com>:
>
> Hey Yousong,
>
> looking at the hexdump comment, this function was actually based off
> of the function mtd_get_mac_binary() which uses the same dd offset
> logic as you can see in mtd_get_mac_binary_ubi(). If this were to be
> changed, shouldn't the same change apply to  mtd_get_mac_binary()?
>

Yes, it should

> I know this would require a new patch, but just want to make sure we
> are on the same page.

Previously, I thought mtd_get_mac_binary_ubi was a new function and not
aware of its resemblence to mtd_get_mac_binary.  A new patch is good if we
think it can help improve the code even though it is mostly unrelated in
the whole series.

And a new nitpick crawls out below...

>
> Regards,
> Chris Blake
>
> On Sun, Dec 6, 2015 at 10:05 PM, Yousong Zhou <yszhou4tech at gmail.com>
wrote:
> > Hello, Christian, a few nitpicks inline :)
> >
> > On 6 December 2015 at 06:48, Christian Lamparter
> > <chunkeey at googlemail.com> wrote:
> >> From: Chris R Blake <chrisrblake93 at gmail.com>
> >>
> >> The MR18 stores the ath9k eeprom values on the NAND.
> >> This patch makes it possible to retrieve the images
> >> from there.
> >>
> >> Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com>
> >> ---
> >>  package/base-files/files/lib/functions/system.sh        | 17
+++++++++++++++++
> >>  .../base-files/etc/hotplug.d/firmware/10-ath9k-eeprom   |  6 +++++-
> >>  2 files changed, 22 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/package/base-files/files/lib/functions/system.sh
b/package/base-files/files/lib/functions/system.sh
> >> index 8d75a5a..928a429 100644
> >> --- a/package/base-files/files/lib/functions/system.sh
> >> +++ b/package/base-files/files/lib/functions/system.sh
> >> @@ -41,6 +41,23 @@ mtd_get_mac_binary() {
> >>         dd bs=1 skip=$offset count=6 if=$part 2>/dev/null | hexdump -v
-n 6 -e '5/1 "%02x:" 1/1 "%02x"'
> >>  }
> >>
> >> +mtd_get_mac_binary_ubi() {
> >> +       local mtdname="$1"
> >> +       local offset="$2"
> >> +
> >> +       . /lib/upgrade/nand.sh
> >> +
> >> +       local ubidev=$( nand_find_ubi $CI_UBIPART )
> >> +       local part="$( nand_find_volume $ubidev $1 )"
> >
> > Quotes and padding whitespaces are not need here for consistency of
code style.
> >
> >> +
> >> +       if [ -z "$part" ]; then
> >> +               echo "mtd_get_mac_binary: ubi partition $mtdname not
found!" >&2

Here the error message should be reworded.

                yousong

> >> +               return
> >> +       fi
> >> +
> >> +       dd bs=1 skip=$offset count=6 if=/dev/$part 2>/dev/null |
hexdump -v -n 6 -e '5/1 "%02x:" 1/1 "%02x"'
> >
> > hexdump accepts an argument for offset with -s option
> >
> >> +}
> >> +
> >>  mtd_get_part_size() {
> >>         local part_name=$1
> >>         local first dev size erasesize name
> >> diff --git
a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
> >> index b5f0588..7287809 100644
> >> ---
a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
> >> +++
b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
> >> @@ -9,11 +9,14 @@ ath9k_eeprom_extract() {
> >>         local part=$1
> >>         local offset=$2
> >>         local count=$3
> >> +       local ubidev=$( nand_find_ubi $CI_UBIPART )
> >>         local mtd
> >>
> >>         mtd=$(find_mtd_chardev $part)
> >>         [ -n "$mtd" ] || \
> >> -               ath9k_eeprom_die "no mtd device found for partition
$part"
> >> +               mtd="/dev/$(nand_find_volume $ubidev $part)"
> >> +               [ -n "$mtd" ] || \
> >> +                       ath9k_eeprom_die "no mtd device found for
partition $part"
> >>
> >
> > The indentation here can be misleading
> >
> >>         dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset
count=$count 2>/dev/null || \
> >>                 ath9k_eeprom_die "failed to extract from $mtd"
> >> @@ -32,6 +35,7 @@ ath9k_patch_firmware_mac() {
> >>  . /lib/ar71xx.sh
> >>  . /lib/functions.sh
> >>  . /lib/functions/system.sh
> >> +. /lib/upgrade/nand.sh
> >>
> >
> > I suggest we move this part including the line "[ -e
> > /lib/firmware/$FIRMWARE ] && exit 0" to top of this file.
> >
> >                 yousong
> >
> >
> >>  board=$(ar71xx_board_name)
> >>
> >> --
> >> 2.6.2
> >> _______________________________________________
> >> openwrt-devel mailing list
> >> openwrt-devel at lists.openwrt.org
> >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel at lists.openwrt.org
> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20151207/78046b6e/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list