[OpenWrt-Devel] [PATCH v2] ramips:Fix support for PBR-M1 board

GuoGuo gch981213 at gmail.com
Fri Dec 4 08:50:44 EST 2015


The PBR-M1 support in current OpenWrt is for the early demo board and it doesn't work on the final board.This patch fixes the support for it.
The LED called pbr-m1:buzzer is a beeper connected to GPIO26 so I used gpio-beeper instead of gpio-leds.

Changes since V1:
Fix style problems.
Use pbr-m1:blue:power as the status led.

Signed-off-by: 郭传鈜 <gch981213 at gmail.com>
---
 target/linux/ramips/base-files/etc/board.d/01_leds |  6 +-
 target/linux/ramips/base-files/etc/diag.sh         |  2 +-
 target/linux/ramips/dts/PBR-M1.dts                 | 67 +++++++++++++++++-----
 3 files changed, 57 insertions(+), 18 deletions(-)

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 8cb0e48..40a5244 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -200,9 +200,9 @@ oy-0001)
 	set_wifi_led "$board:green:wifi"
 	;;
 pbr-m1)
-	ucidef_set_led_netdev "internet" "internet" "$board:green:internet" "eth0.2"
-	ucidef_set_led_default "power" "power" "$board:green:power" "1"
-	ucidef_set_led_default "sys" "sys" "$board:green:sys" "1"
+	ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
+	ucidef_set_led_default "power" "power" "$board:blue:power" "1"
+	ucidef_set_led_default "sys" "sys" "$board:blue:sys" "1"
 	;;
 px-4885)
 	set_wifi_led "$board:orange:wifi"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index ff5fbf2..e2c25dc 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -83,6 +83,7 @@ get_status_led() {
 		;;
 	dap-1350|\
 	na930|\
+	pbr-m1|\
 	rt-n13u|\
 	rt-n14u|\
 	rt-n15|\
@@ -135,7 +136,6 @@ get_status_led() {
 	sl-r7205)
 		status_led="$board:green:wifi"
 		;;
-	pbr-m1|\
 	w306r-v20|\
 	zbt-wr8305rt)
 		status_led="$board:green:sys"
diff --git a/target/linux/ramips/dts/PBR-M1.dts b/target/linux/ramips/dts/PBR-M1.dts
index 7702d9c..6f6ac31 100644
--- a/target/linux/ramips/dts/PBR-M1.dts
+++ b/target/linux/ramips/dts/PBR-M1.dts
@@ -17,6 +17,12 @@
 
 	sdhci at 10130000 {
 		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhci_pins>;
+	};
+
+	xhci at 1E1C0000 {
+		status = "okay";
 	};
 
 	palmbus at 1E000000 {
@@ -81,7 +87,7 @@
 			mt76 at 0,0 {
 				reg = <0x0000 0 0 0 0>;
 				device_type = "pci";
-				mediatek,mtd-eeprom = <&factory 0x0000>;
+				mediatek,mtd-eeprom = <&factory 0x8000>;
 				mediatek,2ghz = <0>;
 			};
 		};
@@ -90,7 +96,7 @@
 			mt76 at 1,0 {
 				reg = <0x0000 0 0 0 0>;
 				device_type = "pci";
-				mediatek,mtd-eeprom = <&factory 0x8000>;
+				mediatek,mtd-eeprom = <&factory 0x0000>;
 				mediatek,5ghz = <0>;
 			};
 		};
@@ -103,24 +109,29 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		buzzer {
-			label = "pbr-m1:buzzer";
-			gpios = <&gpio0 27 1>;
-		};
-
 		power {
-			label = "pbr-m1:green:power";
-			gpios = <&gpio0 25 1>;
+			label = "pbr-m1:blue:power";
+			gpios = <&gpio0 31 1>;
 		};
 
 		sys {
-			label = "pbr-m1:green:sys";
-			gpios = <&gpio0 24 1>;
+			label = "pbr-m1:blue:sys";
+			gpios = <&gpio1 0 1>;
 		};
 
 		internet {
-			label = "pbr-m1:green:internet";
-			gpios = <&gpio0 23 1>;
+			label = "pbr-m1:blue:internet";
+			gpios = <&gpio0 29 1>;
+		};
+
+		2g {
+			label = "pbr-m1:blue:2g";
+			gpios = <&gpio1 1 1>;
+		};
+
+		5g {
+			label = "pbr-m1:blue:5g";
+			gpios = <&gpio0 28 1>;
 		};
 	};
 
@@ -137,10 +148,38 @@
 		};
 	};
 
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		power_usb2 {
+			gpio-export,name = "power_usb2";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 22 0>;
+		};
+
+		power_usb3 {
+			gpio-export,name = "power_usb3";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 25 0>;
+		};
+
+		power_sata {
+			gpio-export,name = "power_sata";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 27 0>;
+		};
+	};
+
+	beeper: beeper {
+		compatible = "gpio-beeper";
+		gpios = <&gpio0 26 1>;
+	};
+
 	pinctrl {
 		state_default: pinctrl0 {
 			gpio {
-				ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+				ralink,group = "wdt", "rgmii2", "jtag", "mdio";
 				ralink,function = "gpio";
 			};
 		};
-- 
2.5.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list