[OpenWrt-Devel] [PATCH] uboot-at91: Add package for uboot on the at91 platform

Ben Whitten ben.whitten at gmail.com
Thu Dec 3 15:46:06 EST 2015


Hi,

On 28 November 2015 at 23:20, John Crispin <blogic at openwrt.org> wrote:

> Hi,
>
> see comments inline
>
> On 28/11/2015 19:35, Ben Whitten wrote:
> > This patch adds a uboot package for at91 and honours COPTS.
> > If the SPL binary is generated for the specified board it moves that too.
> >
> > Signed-off-by: Ben Whitten <benwhitten at gmail.com>
> > ---
> >  package/boot/uboot-at91/Makefile | 117
> +++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 117 insertions(+)
> >  create mode 100644 package/boot/uboot-at91/Makefile
> >
> > diff --git a/package/boot/uboot-at91/Makefile
> b/package/boot/uboot-at91/Makefile
> > new file mode 100644
> > index 0000000..7eb2828
> > --- /dev/null
> > +++ b/package/boot/uboot-at91/Makefile
> > @@ -0,0 +1,117 @@
> > +#
> > +# Copyright (C) 2013-2015 OpenWrt.org
> > +#
> > +# This is free software, licensed under the GNU General Public License
> v2.
> > +# See /LICENSE for more information.
> > +#
> > +
> > +include $(TOPDIR)/rules.mk
> > +
> > +PKG_NAME:=u-boot
> > +PKG_VERSION:=2015.10
> > +PKG_RELEASE:=1
> > +
> >
> +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
> > +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
> > +PKG_SOURCE_URL:= \
> > +     http://mirror2.openwrt.org/sources \
> > +     ftp://ftp.denx.de/pub/u-boot
> > +PKG_MD5SUM:=7c203b0fc3390a122d8e8b75f147eac5
> > +
> > +PKG_BUILD_PARALLEL:=1
> > +
> > +include $(INCLUDE_DIR)/package.mk
> > +
> > +define uboot/Default
> > +  TITLE:=
> > +  CONFIG:=
> > +  IMAGE:=
> > +endef
> > +
>
> are you sure that the section above is required ? it seems superflous to
> me.
>
>         John
>
Ah probably not, I just copied the format from the other uboot packages
from other arches, I shall send a new patch, thanks :)
Ben

>
> > +define uboot/at91sam9263ek_nandflash
> > +  TITLE:=U-Boot for the AT91SAM9263-EK board (NandFlash)
> > +endef
> > +
> > +define uboot/at91sam9g20ek_nandflash
> > +  TITLE:=U-Boot for the AT91SAM9G20-EK board (NandFlash)
> > +endef
> > +
> > +define uboot/at91sam9g20ek_2mmc_nandflash
> > +  TITLE:=U-Boot for the AT91SAM9G20-EK 2MMC board (NandFlash)
> > +endef
> > +
> > +define uboot/at91sam9xeek_nandflash
> > +  TITLE:=U-Boot for the AT91SAM9XE-EK board (NandFlash)
> > +endef
> > +
> > +define uboot/at91sam9x5ek_nandflash
> > +  TITLE:=U-Boot for the AT91SAM9X5-EK board (NandFlash)
> > +endef
> > +
> > +UBOOTS := \
> > +     at91sam9263ek_nandflash \
> > +     at91sam9g20ek_nandflash \
> > +     at91sam9g20ek_2mmc_nandflash \
> > +     at91sam9xeek_nandflash \
> > +     at91sam9x5ek_nandflash
> > +
> > +define Package/uboot/template
> > +define Package/uboot-at91-$(1)
> > +  SECTION:=boot
> > +  CATEGORY:=Boot Loaders
> > +  DEPENDS:=@TARGET_at91
> > +  TITLE:=$(2)
> > +  URL:=http://www.denx.de/wiki/U-Boot
> > +  VARIANT:=$(1)
> > +endef
> > +endef
> > +
> > +define BuildUBootPackage
> > +     $(eval $(uboot/Default))
> > +     $(eval $(uboot/$(1)))
> > +     $(call Package/uboot/template,$(1),$(TITLE))
> > +endef
> > +
> > +ifdef BUILD_VARIANT
> > +$(eval $(call uboot/$(BUILD_VARIANT)))
> > +UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
> > +UBOOT_IMAGE:=$(if
> $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
> > +endif
> > +
> > +define Build/Configure
> > +     +$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
> > +             $(UBOOT_CONFIG)_config
> > +endef
> > +
> > +define Build/Compile
> > +     +$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
> > +             CROSS_COMPILE=$(TARGET_CROSS) \
> > +             KCFLAGS="$(filter-out -fstack-protector, $(TARGET_CFLAGS))"
> > +endef
> > +
> > +define Package/uboot/install/default
> > +     $(INSTALL_DIR) $(BIN_DIR)/uboot-$(BOARD)-$(1)
> > +     $(CP) \
> > +             $(PKG_BUILD_DIR)/u-boot.bin \
> > +
>  $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-u-boot.bin
> > +     if [ -e $(PKG_BUILD_DIR)/boot.bin ]; then \
> > +             $(CP) \
> > +                     $(PKG_BUILD_DIR)/boot.bin \
> > +
>  $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-boot.bin; \
> > +     fi
> > +endef
> > +
> > +define Package/uboot/install/template
> > +define Package/uboot-at91-$(1)/install
> > +     $(call Package/uboot/install/default,$(2))
> > +endef
> > +endef
> > +
> > +$(foreach u,$(UBOOTS), \
> > +     $(eval $(call Package/uboot/install/template,$(u),$(u))) \
> > +)
> > +
> > +$(foreach u,$(UBOOTS), \
> > +     $(eval $(call BuildUBootPackage,$(u))) \
> > +     $(eval $(call BuildPackage,uboot-at91-$(u))) \
> > +)
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20151203/e08e78e1/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list