[OpenWrt-Devel] [PATCH v4] ramips: add support for MQmaker WiTi board

Sebastian Careba nitroshift at yahoo.com
Thu Dec 3 01:20:47 EST 2015


The board is based on mt7621AT cpu, and has 16mb nor flash, 256mb of ram, 2 sata ports, microsd card slot, 1 USB 3.0 port and at least one 2.4 and one 5 ghz antenna. This is the 4th submission that fixes the naming scheme for Mqmaker WiTi board.
Patch v1 added initial support for MQmaker WiTi board. The device tree is based on PBR-M1.
Patch v2 changed the flash chip ID (w25q256 to gd25q128).
Patch v3 fixed the left-out entry for WiTi in 02_network.

Signed-off-by: Sebastian Careba <nitroshift at yahoo.com>
---
 .../patches-3.18/999-add_gd25q128_support.patch    |  13 ++
 .../linux/ramips/base-files/etc/board.d/02_network |   1 +
 target/linux/ramips/base-files/etc/diag.sh         |   1 +
 target/linux/ramips/base-files/lib/ramips.sh       |   3 +
 .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ramips/dts/WITI.dts                   | 142 +++++++++++++++++++++
 target/linux/ramips/image/Makefile                 |   7 +-
 target/linux/ramips/mt7621/profiles/mqmaker.mk     |  20 +++
 8 files changed, 187 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/generic/patches-3.18/999-add_gd25q128_support.patch
 create mode 100644 target/linux/ramips/dts/WITI.dts
 create mode 100644 target/linux/ramips/mt7621/profiles/mqmaker.mk

diff --git a/target/linux/generic/patches-3.18/999-add_gd25q128_support.patch b/target/linux/generic/patches-3.18/999-add_gd25q128_support.patch
new file mode 100644
index 0000000..e9c380b
--- /dev/null
+++ b/target/linux/generic/patches-3.18/999-add_gd25q128_support.patch
@@ -0,0 +1,13 @@
Index: linux-3.18.23/drivers/mtd/devices/m25p80.c
===================================================================
--- linux-3.18.23.orig/drivers/mtd/devices/m25p80.c
+++ linux-3.18.23/drivers/mtd/devices/m25p80.c
@@ -352,7 +352,7 @@ static const struct spi_device_id m25p_i
 	{"en25q64"},	{"en25qh128"},	{"en25qh256"},
 	{"f25l32pa"},
 	{"mr25h256"},	{"mr25h10"},
-	{"gd25q32"},	{"gd25q64"},
+	{"gd25q32"},	{"gd25q64"},	{"gd25q128"},
 	{"160s33b"},	{"320s33b"},	{"640s33b"},
 	{"mx25l2005a"},	{"mx25l4005a"},	{"mx25l8005"},	{"mx25l1606e"},
 	{"mx25l3205d"},	{"mx25l3255e"},	{"mx25l6405d"},	{"mx25l12805d"},
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 7e51229..0cdecb0 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -81,6 +81,7 @@ ramips_setup_interfaces()
 	wf-2881|\
 	whr-300hp2|\
 	whr-600d|\
+	witi|\
 	wsr-1166|\
 	wsr-600|\
 	wt1520|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index ff5fbf2..41e3a34 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -137,6 +137,7 @@ get_status_led() {
 		;;
 	pbr-m1|\
 	w306r-v20|\
+	witi|\
 	zbt-wr8305rt)
 		status_led="$board:green:sys"
 		;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 92e13c0..c002b97 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -391,6 +391,9 @@ ramips_board_detect() {
 	*"WHR-G300N")
 		name="whr-g300n"
 		;;
+	*"WiTi")
+                name="witi"
+		;;
 	*"WIZARD 8800")
 		name="wizard8800"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 073593a..4ec3008 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -113,6 +113,7 @@ platform_check_image() {
 	whr-300hp2|\
 	whr-600d|\
 	whr-g300n|\
+	witi|\
 	wizfi630a|\
 	wl-330n|\
 	wl-330n3g|\
diff --git a/target/linux/ramips/dts/WITI.dts b/target/linux/ramips/dts/WITI.dts
new file mode 100644
index 0000000..7a3a9ff
--- /dev/null
+++ b/target/linux/ramips/dts/WITI.dts
@@ -0,0 +1,142 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+	model = "MQmaker WiTi";
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	sdhci at 10130000 {
+		status = "okay";
+	};
+
+	palmbus at 1E000000 {
+		spi at b00 {
+			status = "okay";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "gd25q128";
+				reg = <0 0>;
+				linux,modalias = "m25p80";
+				spi-max-frequency = <10000000>;
+
+				partition at 0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 50000 {
+					label = "firmware";
+					reg = <0x50000 0xfb0000>;
+				};
+			};
+		};
+
+		i2c at 900 {
+			compatible = "ralink,i2c-mt7621";
+			reg = <0x900 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c_pins>;
+			status = "okay";
+
+			pcf8563: rtc at 51 {
+				status = "okay";
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	pcie at 1e140000 {
+		status = "okay";
+
+		pcie0 {
+			mt76 at 0,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x0000>;
+				mediatek,2ghz = <0>;
+			};
+		};
+
+		pcie1 {
+			mt76 at 1,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x8000>;
+				mediatek,5ghz = <0>;
+			};
+		};
+	};
+
+	ethernet at 1e100000 {
+		mtd-mac-address = <&factory 0xe000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "witi:green:power";
+			gpios = <&gpio0 25 1>;
+		};
+
+		sys {
+			label = "witi:green:sys";
+			gpios = <&gpio0 24 1>;
+		};
+
+		internet {
+			label = "witi:green:internet";
+			gpios = <&gpio0 23 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 18 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+				ralink,function = "gpio";
+			};
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index e58d012..478ead9 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -954,7 +954,7 @@ endif
 #
 
 ifeq ($(SUBTARGET),mt7621)
-  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 wf-2881
+  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 witi wf-2881 zbt-wg2626
 endif
 
 define Device/mt7621
@@ -1004,6 +1004,11 @@ define Device/sap-g3200u3
   DTS := SAP-G3200U3
 endef
 
+define Device/witi
+  DTS := WITI
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
 define Device/zbt-wg2626
   DTS := ZBT-WG2626
   IMAGE_SIZE := $(ralink_default_fw_size_16M)
diff --git a/target/linux/ramips/mt7621/profiles/mqmaker.mk b/target/linux/ramips/mt7621/profiles/mqmaker.mk
new file mode 100644
index 0000000..e0dbe0d
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/mqmaker.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/witi
+	NAME:=MQmaker WiTi
+	FEATURES+=rtc
+	PACKAGES:=\
+		kmod-usb-core kmod-usb3 kmod-usb-hid kmod-sdhci-mt7620 \
+		kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \
+		kmod-rtc-pcf8563
+endef
+
+define Profile/witi/Description
+	Package set compatible with MQmaker WiTi board.
+endef
+$(eval $(call Profile,witi))
-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list