[OpenWrt-Devel] [PATCH] target: ar71xx: add support for Comfast CF-E316N v2 board

Paul Fertser fercerpav at gmail.com
Fri Aug 28 06:09:38 EDT 2015


This adds full support (sans sysupgrading from vendor firmware) for the COMFAST
CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by
Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is
actively refusing to provide GPL'd sources for the OpenWrt version they ship
with the device, damn them).

Signed-off-by: Paul Fertser <fercerpav at gmail.com>
---
 target/linux/ar71xx/base-files/etc/diag.sh         |   3 +
 .../ar71xx/base-files/etc/uci-defaults/01_leds     |   6 +
 target/linux/ar71xx/base-files/lib/ar71xx.sh       |   3 +
 .../ar71xx/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ar71xx/config-4.1                     |   1 +
 .../files/arch/mips/ath79/mach-cf-e316n-v2.c       | 128 +++++++++++++++++++++
 target/linux/ar71xx/generic/profiles/comfast.mk    |  19 +++
 target/linux/ar71xx/image/Makefile                 |   8 ++
 .../700-MIPS-ath79-openwrt-machines.patch          |  51 +++++---
 9 files changed, 204 insertions(+), 16 deletions(-)
 create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
 create mode 100644 target/linux/ar71xx/generic/profiles/comfast.mk

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 36de775..1b1f6c7 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -56,6 +56,9 @@ get_status_led() {
 	cap4200ag)
 		status_led="senao:green:pwr"
 		;;
+	cf-e316n-v2)
+		status_led="$(ar71xx_board_name):blue:wan"
+		;;
 	cpe510)
 		status_led="tp-link:green:link4"
 		;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index e7f7a4c..6ecc0e2 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -96,6 +96,12 @@ carambola2)
 	ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt"
 	;;
 
+cf-e316n-v2)
+	ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0"
+	ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
+	ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
+	;;
+
 cpe510)
 	ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
 	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index e1f345e..d495940 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -392,6 +392,9 @@ ar71xx_board_detect() {
 	*CAP4200AG)
 		name="cap4200ag"
 		;;
+	*"COMFAST CF-E316N v2")
+		name="cf-e316n-v2"
+		;;
 	*"CPE210/220/510/520")
 		name="cpe510"
 		tplink_pharos_board_detect
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index c1962e4..673ee4e 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -199,6 +199,7 @@ platform_check_image() {
 	ap81 | \
 	ap83 | \
 	ap132 | \
+	cf-e316n-v2 | \
 	dgl-5500-a1 |\
 	dhp-1565-a1 |\
 	dir-505-a1 | \
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index 21c4601..97cbc13 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -50,6 +50,7 @@ CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
 CONFIG_ATH79_MACH_BSB=y
 CONFIG_ATH79_MACH_CAP4200AG=y
 CONFIG_ATH79_MACH_CARAMBOLA2=y
+CONFIG_ATH79_MACH_CF_E316N_V2=y
 CONFIG_ATH79_MACH_CPE510=y
 CONFIG_ATH79_MACH_DB120=y
 CONFIG_ATH79_MACH_DGL_5500_A1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
new file mode 100644
index 0000000..c310a1b
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
@@ -0,0 +1,128 @@
+/*
+ *  COMFAST CF-E316N v2
+ *  by Shenzhen Four Seas Global Link Network Technology Co., Ltd
+ *
+ *  aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
+ *
+ *  Copyright (C) 2015 Paul Fertser <fercerpav at gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/timer.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = {
+	{
+		.name		= "cf-e316n-v2:blue:diag",
+		.gpio		= 0,
+		.active_low	= 0,
+	}, {
+		.name		= "cf-e316n-v2:red:diag",
+		.gpio		= 2,
+		.active_low	= 0,
+	}, {
+		.name		= "cf-e316n-v2:green:diag",
+		.gpio		= 3,
+		.active_low	= 0,
+	}, {
+		.name		= "cf-e316n-v2:blue:wlan",
+		.gpio		= 12,
+		.active_low	= 1,
+	}, {
+		.name		= "cf-e316n-v2:blue:wan",
+		.gpio		= 17,
+		.active_low	= 1,
+	}, {
+		.name		= "cf-e316n-v2:blue:lan",
+		.gpio		= 19,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = {
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = 60,
+		.gpio		= 20,
+		.active_low	= 1,
+	},
+};
+
+/* There's a Pericon Technology PT7A7514 connected to GPIO 16 */
+#define EXT_WATCHDOG_GPIO	16
+static struct timer_list gpio_wdt_timer;
+
+static void gpio_wdt_toggle(unsigned long period)
+{
+	static int state;
+	state = !state;
+	gpio_set_value(EXT_WATCHDOG_GPIO, state);
+	mod_timer(&gpio_wdt_timer, jiffies + period);
+}
+
+static void __init cf_e316n_v2_setup(void)
+{
+	u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000);
+	u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1f011000);
+	u8 tmpmac[ETH_ALEN];
+
+	gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog");
+	gpio_direction_output(EXT_WATCHDOG_GPIO, 0);
+	setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500));
+	gpio_wdt_toggle(msecs_to_jiffies(1));
+
+	ath79_register_m25p80(NULL);
+
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+	ath79_register_mdio(1, 0x0);
+
+	/* GMAC0 is connected to the PHY0 of the internal switch */
+	ath79_switch_data.phy4_mii_en = 1;
+	ath79_switch_data.phy_poll_mask = BIT(0);
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.phy_mask = BIT(0);
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+	ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0);
+	ath79_register_eth(0);
+
+	/* GMAC1 is connected to the internal switch */
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 2);
+	ath79_register_eth(1);
+
+	/* Enable 2x Skyworks SE2576L WLAN power amplifiers */
+	gpio_request(13, "RF Amp 1");
+	gpio_direction_output(13, 1);
+	gpio_request(14, "RF Amp 2");
+	gpio_direction_output(14, 1);
+	ath79_init_mac(tmpmac, macwlan, 0);
+	ath79_register_wmac(ee, tmpmac);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio),
+				 cf_e316n_v2_leds_gpio);
+
+	ath79_register_gpio_keys_polled(1, 20,
+					ARRAY_SIZE(cf_e316n_v2_gpio_keys),
+					cf_e316n_v2_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2",
+	     cf_e316n_v2_setup);
diff --git a/target/linux/ar71xx/generic/profiles/comfast.mk b/target/linux/ar71xx/generic/profiles/comfast.mk
new file mode 100644
index 0000000..5d447e5
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/comfast.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/CF-E316N-V2
+        NAME:=COMFAST CF-E316N v2
+        PACKAGES:=
+endef
+
+define Profile/CF-E316N-V2/Description
+        Package set optimised for the COMFAST CF-E316N v2
+        by Shenzhen Four Seas Global Link Network Technology Co., Ltd
+        aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
+endef
+
+$(eval $(call Profile,CF-E316N-V2))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 8f609de..e72f524 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -188,6 +188,14 @@ define Device/carambola2
 endef
 TARGET_DEVICES += carambola2
 
+define Device/cf-e316n-v2
+  BOARDNAME = CF-E316N-V2
+  IMAGE_SIZE = 16192k
+  CONSOLE = ttyS0,115200
+  MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
+endef
+TARGET_DEVICES += cf-e316n-v2
+
 define Device/wndr3700
   BOARDNAME = WNDR3700
   NETGEAR_KERNEL_MAGIC = 0x33373030
diff --git a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
index 02ebd1b..ade0c2c 100644
--- a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,8 @@
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -16,24 +16,207 @@
+Index: linux-4.1.5/arch/mips/ath79/machtypes.h
+===================================================================
+--- linux-4.1.5.orig/arch/mips/ath79/machtypes.h	2015-08-16 16:57:42.480656824 +0100
++++ linux-4.1.5/arch/mips/ath79/machtypes.h	2015-08-16 16:59:33.868656175 +0100
+@@ -16,24 +16,208 @@
  
  enum ath79_mach_type {
  	ATH79_MACH_GENERIC = 0,
@@ -28,6 +30,7 @@
 +	ATH79_MACH_BHU_BXU2000N2_A1,	/* BHU BXU2000n-2 A1 */
 +	ATH79_MACH_CAP4200AG,		/* Senao CAP4200AG */
 +	ATH79_MACH_CARAMBOLA2,		/* 8devices Carambola2 */
++	ATH79_MACH_CF_E316N_V2,		/* COMFAST CF-E316N v2 */
 +	ATH79_MACH_CPE510,		/* TP-LINK CPE510 */
  	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
  	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
@@ -208,9 +211,11 @@
  };
  
  #endif /* _ATH79_MACHTYPE_H */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -2,6 +2,90 @@ if ATH79
+Index: linux-4.1.5/arch/mips/ath79/Kconfig
+===================================================================
+--- linux-4.1.5.orig/arch/mips/ath79/Kconfig	2015-08-16 16:57:42.480656824 +0100
++++ linux-4.1.5/arch/mips/ath79/Kconfig	2015-08-16 17:03:19.472654861 +0100
+@@ -2,6 +2,90 @@
  
  menu "Atheros AR71XX/AR724X/AR913X machine selection"
  
@@ -301,7 +306,7 @@
  config ATH79_MACH_AP121
  	bool "Atheros AP121 reference board"
  	select SOC_AR933X
-@@ -11,62 +95,1107 @@ config ATH79_MACH_AP121
+@@ -11,62 +95,1107 @@
  	select ATH79_DEV_M25P80
  	select ATH79_DEV_USB
  	select ATH79_DEV_WMAC
@@ -1437,7 +1442,7 @@
  
  config ATH79_MACH_UBNT_XM
  	bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1212,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1212,106 @@
  	  Say 'Y' here if you want your kernel to support the
  	  Ubiquiti Networks XM (rev 1.0) board.
  
@@ -1511,6 +1516,15 @@
 +	select ATH79_DEV_USB
 +	select ATH79_DEV_WMAC
 +
++config ATH79_MACH_CF_E316N_V2
++	bool "COMFAST CF-E316N v2 board"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
 +config ATH79_MACH_BHU_BXU2000N2_A
 +	bool "BHU BXU2000n-2 rev. A support"
 +	select SOC_AR934X
@@ -1535,7 +1549,7 @@
  endmenu
  
  config SOC_AR71XX
-@@ -134,7 +1354,10 @@ config ATH79_DEV_DSA
+@@ -134,7 +1364,10 @@
  config ATH79_DEV_ETH
  	def_bool n
  
@@ -1547,7 +1561,7 @@
  	def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -164,6 +1387,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,6 +1397,11 @@
  	def_bool n
  
  config ATH79_ROUTERBOOT
@@ -1559,9 +1573,11 @@
  	def_bool n
  
  endif
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,133 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)		+= route
+Index: linux-4.1.5/arch/mips/ath79/Makefile
+===================================================================
+--- linux-4.1.5.orig/arch/mips/ath79/Makefile	2015-08-16 16:57:42.480656824 +0100
++++ linux-4.1.5/arch/mips/ath79/Makefile	2015-08-16 17:05:19.072654165 +0100
+@@ -38,9 +38,134 @@
  #
  # Machines
  #
@@ -1583,6 +1599,7 @@
 +obj-$(CONFIG_ATH79_MACH_AW_NR580)	+= mach-aw-nr580.o
 +obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
 +obj-$(CONFIG_ATH79_MACH_CAP4200AG)	+= mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CF_E316N_V2)	+= mach-cf-e316n-v2.o
 +obj-$(CONFIG_ATH79_MACH_CPE510)		+= mach-cpe510.o
  obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
 +obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP)	+= mach-dlan-pro-500-wp.o
@@ -1695,9 +1712,11 @@
 +obj-$(CONFIG_ATH79_MACH_ZCN_1523H)	+= mach-zcn-1523h.o
 +obj-$(CONFIG_ATH79_MACH_CARAMBOLA2)	+= mach-carambola2.o
 +obj-$(CONFIG_ATH79_MACH_NBG6716)	+= mach-nbg6716.o
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -130,6 +130,13 @@ void __init prom_init(void)
+Index: linux-4.1.5/arch/mips/ath79/prom.c
+===================================================================
+--- linux-4.1.5.orig/arch/mips/ath79/prom.c	2015-08-16 16:57:42.480656824 +0100
++++ linux-4.1.5/arch/mips/ath79/prom.c	2015-08-16 16:57:42.476656824 +0100
+@@ -130,6 +130,13 @@
  		initrd_end = initrd_start + fw_getenvl("initrd_size");
  	}
  #endif
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list