[OpenWrt-Devel] [PATCH 08/10] ipq806x: build images and add sysupgrade support for AP148

[Jonas Gorski]

Add full ubi and sysupgrade images for AP148 and add sysupgrade support
for ipq806x to allow updating the current installation.

Signed-off-by: Jonas Gorski <jogo at openwrt.org>
---
 .../linux/ipq806x/base-files/lib/upgrade/platform.sh | 18 ++++++++++++++++++
 target/linux/ipq806x/image/Makefile                  | 20 +++++++++++++++++---
 2 files changed, 35 insertions(+), 3 deletions(-)
 create mode 100644 target/linux/ipq806x/base-files/lib/upgrade/platform.sh

diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000..e834ead
--- /dev/null
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,18 @@
+. /lib/ipq806x.sh
+
+PART_NAME=firmware
+
+platform_check_image() {
+	local board=$(ipq806x_board_name)
+
+	case "$board" in
+	AP148)
+		nand_do_platform_check $board $1
+		return $?;
+		;;
+	*)
+		return 1;
+	esac
+}
+
+# use default for platform_do_upgrade()
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index dad6ee3..ac0fc84 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -35,36 +35,50 @@ define Device/Default
 	DEVICE_DTS :=
 	KERNEL_PREFIX := $$(IMAGE_PREFIX)
 	IMAGES :=
+	KERNEL_IN_UBI :=
 endef
-DEVICE_VARS += DEVICE_DTS
+DEVICE_VARS += DEVICE_DTS KERNEL_IN_UBI
 
 define Device/LegacyImage
 	KERNEL_SUFFIX := -uImage
 	KERNEL = kernel-bin | append-dtb | uImage none
 	KERNEL_NAME := zImage
-	KERNEL_INSTALL := 1
 endef
 
 define Device/FitImage
 	KERNEL_SUFFIX := -fit-uImage.itb
 	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
 	KERNEL_NAME := Image
-	KERNEL_INSTALL := 1
+endef
+
+define Device/UbiFit
+	KERNEL_IN_UBI := 1
+	IMAGES := nand-factory.ubi nand-sysupgrade.tar
+	IMAGE/nand-factory.ubi := append-ubi
+	IMAGE/nand-sysupgrade.tar := sysupgrade-nand
 endef
 
 define Device/AP148
 	$(call Device/FitImage)
+	$(call Device/UbiFit)
 	DEVICE_DTS := qcom-ipq8064-ap148
+	BLOCKSIZE := 128KiB
+	PAGESIZE := 2048
 endef
 
 define Device/AP148-legacy
 	$(call Device/LegacyImage)
+	$(call Device/UbiFit)
 	DEVICE_DTS := qcom-ipq8064-ap148
+	BLOCKSIZE := 128KiB
+	PAGESIZE := 2048
+	BOARD_NAME := AP148
 endef
 
 define Device/DB149
 	$(call Device/FitImage)
 	DEVICE_DTS := qcom-ipq8064-db149
+	KERNEL_INSTALL := 1
 endef
 
 TARGET_DEVICES += AP148 AP148-legacy DB149
-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel