[OpenWrt-Devel] [PATCH] Fix for mvebu (WRT1900AC/WRT1200AC/etc) boot counter
Rob Mosher
nyt-openwrt at countercultured.net
Tue Aug 18 10:21:13 EDT 2015
The uboot boot counter was never reset after a successful boot.
This patch prevents bootcmd and boot_part from becoming out of sync
after a sysupgrade and ensures the proper partition is booted.
Signed-off-by: Rob Mosher <nyt-openwrt at countercultured.net>
---
package/system/mtd/Makefile | 2 +-
package/system/mtd/src/Makefile | 1 +
package/system/mtd/src/mvebu.c | 100 +++++++++++++++++++++
.../linux/mvebu/base-files/etc/init.d/u-boot_env | 1 +
4 files changed, 103 insertions(+), 1 deletion(-)
create mode 100644 package/system/mtd/src/mvebu.c
diff --git a/package/system/mtd/Makefile b/package/system/mtd/Makefile
index 8d7bb44..ae1922f 100644
--- a/package/system/mtd/Makefile
+++ b/package/system/mtd/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=mtd
-PKG_RELEASE:=20
+PKG_RELEASE:=21
PKG_BUILD_DIR := $(KERNEL_BUILD_DIR)/$(PKG_NAME)
STAMP_PREPARED := $(STAMP_PREPARED)_$(call confvar,CONFIG_MTD_REDBOOT_PARTS)
diff --git a/package/system/mtd/src/Makefile b/package/system/mtd/src/Makefile
index 27ac339..3424dd2 100644
--- a/package/system/mtd/src/Makefile
+++ b/package/system/mtd/src/Makefile
@@ -10,6 +10,7 @@ obj.brcm47xx = $(obj.brcm)
obj.bcm53xx = $(obj.brcm)
obj.brcm63xx = imagetag.o
obj.ramips = $(obj.seama)
+obj.mvebu = mvebu.c
ifdef FIS_SUPPORT
obj += fis.o
diff --git a/package/system/mtd/src/mvebu.c b/package/system/mtd/src/mvebu.c
new file mode 100644
index 0000000..0929a97
--- /dev/null
+++ b/package/system/mtd/src/mvebu.c
@@ -0,0 +1,100 @@
+/*
+ * GPL Header ...
+ */
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <endian.h>
+#include <string.h>
+#include <errno.h>
+
+#include <sys/ioctl.h>
+#include <mtd/mtd-user.h>
+
+#include "mtd.h"
+
+#define BOOTCOUNT_MAGIC 0x20110811
+
+struct bootcounter {
+ uint32_t magic;
+ uint32_t count;
+ uint32_t checksum;
+};
+
+static char page[2048];
+
+int mtd_fixtrx(const char *mtd, size_t offset)
+{
+ struct mtd_info_user mtd_info;
+ struct bootcounter *curr = (struct bootcounter *)page;
+ unsigned int i;
+ int last_count = 0;
+ int num_bc;
+ int fd;
+ int ret;
+
+ fd = mtd_check_open(mtd);
+
+ if (ioctl(fd, MEMGETINFO, &mtd_info) < 0) {
+ fprintf(stderr, "failed to get mtd info!");
+ return -1;
+ }
+
+ num_bc = mtd_info.size / mtd_info.writesize;
+
+ for (i = 0; i < num_bc; i++) {
+ pread(fd, curr, sizeof(*curr), i * mtd_info.writesize);
+
+ if (curr->magic != BOOTCOUNT_MAGIC && curr->magic != 0xffffffff) {
+ printf("unexpected magic %08x, bailing out\n", curr->magic);
+ goto out;
+ }
+
+ if (curr->magic == 0xffffffff)
+ break;
+
+ last_count = curr->count;
+ }
+
+ /* no need to do writes when last boot count is already 0 */
+ if (last_count == 0)
+ goto out;
+
+
+ if (i == num_bc) {
+ struct erase_info_user erase_info;
+ erase_info.start = 0;
+ erase_info.length = mtd_info.size;
+
+ /* erase block */
+ ret = ioctl(fd, MEMERASE, &erase_info);
+ if (ret < 0) {
+ printf("failed to erase block: %i\n", ret);
+ return -1;
+ }
+
+ i = 0;
+ }
+
+ memset(curr, 0xff, mtd_info.writesize);
+
+ curr->magic = BOOTCOUNT_MAGIC;
+ curr->count = 0;
+ curr->checksum = BOOTCOUNT_MAGIC;
+
+ ret = pwrite(fd, curr, mtd_info.writesize, i * mtd_info.writesize);
+ if (ret < 0)
+ printf("failed to write: %i\n", ret);
+ sync();
+out:
+ close(fd);
+
+ return 0;
+}
diff --git a/target/linux/mvebu/base-files/etc/init.d/u-boot_env b/target/linux/mvebu/base-files/etc/init.d/u-boot_env
index 82f36cb..2869dd6 100755
--- a/target/linux/mvebu/base-files/etc/init.d/u-boot_env
+++ b/target/linux/mvebu/base-files/etc/init.d/u-boot_env
@@ -9,6 +9,7 @@ boot() {
case $(mvebu_board_name) in
armada-385-linksys-caiman|armada-385-linksys-cobra|armada-xp-linksys-mamba)
fw_setenv auto_recovery off
+ mtd fixtrx s_env
;;
esac
}
--
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list