[OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch

[Ian Kent]

On Sat, 2015-08-15 at 09:55 +0800, Ian Kent wrote:
> On Fri, 2015-08-14 at 19:55 +0200, Hauke Mehrtens wrote:
> > On 08/14/2015 06:03 AM, Ian Kent wrote:
> > > On Wed, 2015-08-12 at 22:01 +0200, Hauke Mehrtens wrote:
> > >> On 07/15/2015 12:11 PM, Ian Kent wrote:
> > >>> On Tue, 2015-07-14 at 18:19 +0200, Rafał Miłecki wrote:
> > >>>> On 28 June 2015 at 05:37, Ian Kent <raven at themaw.net> wrote:
> > >>>>> Let me rework this using the bus number as you recommend.
> > >>>>> I'll repost my updated patch series once I've done that.
> > >>>>
> > >>>> Hi Ian,
> > >>>>
> > >>>> Is there any chance you'll find a moment for it anytime soon? It'd be
> > >>>> awesome to get R8000 support for CC release.
> > >>>
> > >>> I have reworked the patch and a broken package build problem I had is
> > >>> gone but I didn't get time to fix build problems with a third patch I
> > >>> have.
> > >>>
> > >>> Just didn't get time last weekend and this week has been quite busy too.
> > >>> I'll try and get onto this in the next few days.
> > >>>
> > >>> Ian
> > >>
> > >> Hi Ian,
> > >>
> > >> you patch looks better than the hack Broadcom did in their vendor driver.
> > > 
> > > I thought so, ;)
> > > 
> > >>
> > >> Could you send me a lspci output or the content of /proc/bus/pci/devices
> > >> of the original firmware or of OpenWrt with your patch applied? I would
> > >> prefer lspci because it is easier to read but cat from
> > >> /proc/bus/pci/devices also works. I do not have such a device and want
> > >> to understand how this PCIe switch looks like on the software side, so
> > >> we can fix the domain, bus, slot, function mixup.
> > > 
> > > I haven't been able to build OpenWrt for a while now and that's why I
> > > haven't been able to test my changes to the patch.
> > 
> > I haven't noticed a problem in the OpenWrt build system, do you still
> > have this problem? Have you tried to clean and rebuild again?
> 
> The problem I have now is with mkimage.
> 
> It started after a distclean and reconfigure to ensure I was getting a
> fully up to date repo.

OK, I had a quick look around for this problem and, much to my surprise,
I found this (I hadn't found anything previously).

https://dev.openwrt.org/ticket/20134#comment:10

I'll try reverting the commit and see if I can make some progress over
the weekend.

Ian
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel