[OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)

[John kerry]

Yes,

i can copy the config and build with this configuration,

for example now i have connected to some router, another time we can
connect to any router. So how i can fix the settings by default.

On Tue, Aug 11, 2015 at 12:45 AM, David Lang <david at lang.hm> wrote:

> On Mon, 10 Aug 2015, John kerry wrote:
>
> I followed the same steps and its working too. But this i want in wireless
>> config file, Because i dont want every time to add using GUI. So When i
>> connect to another router also, no need to add one more. I mean to say it
>> should be in default wireless config file.
>>
>
> what do you mean by "default wireless config file"
>
> Once you have set it from the GUI, it is in the config files. The next
> time you boot it will use that config.
>
> If you mean that you want it in the factory default config (for when you
> first flash the router or do a factory reset), then take the
> /etc/config/wireless and /etc/config/network files and add them to your
> build under /files
>
> David Lang
>
>
> On Mon, Aug 10, 2015 at 6:18 PM, David Lang <david at lang.hm> wrote:
>>
>> On Mon, 10 Aug 2015, John kerry wrote:
>>>
>>> Date: Mon, 10 Aug 2015 18:10:14 +0800
>>>
>>>> From: John kerry <kerry9842 at gmail.com>
>>>> To: Alex Weedy <weedy2887 at gmail.com>,
>>>>     OpenWrt Development List <openwrt-devel at lists.openwrt.org>
>>>> Subject: [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple
>>>> Wi-Fi
>>>>     client/AP interfaces on one radio)
>>>>
>>>> Firstly i configure wireless config as below:
>>>>
>>>> config wifi-device 'wifi0'
>>>>        option type 'qcawifi'
>>>>        option macaddr '00:01:11:00:01:00'
>>>>        option hwmode '11ng'
>>>>        option txpower '17'
>>>>        option htmode 'HT20'
>>>>        option disabled '0'
>>>>        option channel '1'
>>>>
>>>> config wifi-iface
>>>>        option device 'wifi0'
>>>>        option mode 'ap'
>>>>        option ssid 'Testing_ap'
>>>>        option network 'lan'
>>>>        option encryption 'psk2'
>>>>        option key 'Testing_ap'
>>>>
>>>> so its SSID was showing and able to connect any device to it.
>>>>
>>>> Then i scan the device and connect to one of it. While joining the
>>>> network
>>>> i selected Client(WDS) then the wireless config becomes like below:
>>>>
>>>>
>>> why don't you try following the steps in the video that you posted.
>>>
>>> first connect as a client, then add an additional interface and make the
>>> second interface the AP for things to connect to.
>>>
>>> the order may make a difference.
>>>
>>> David Lang
>>>
>>>
>>> config wifi-device 'wifi0'
>>>
>>>>        option type 'qcawifi'
>>>>        option macaddr '00:01:11:00:01:00'
>>>>        option hwmode '11ng'
>>>>        option txpower '17'
>>>>        option htmode 'HT20'
>>>>        option disabled '0'
>>>>        option channel '1'
>>>>
>>>> config wifi-iface
>>>>        option network 'wwan'
>>>>        option ssid 'D_Link_Router'
>>>>        option encryption 'psk2'
>>>>        option device 'wifi0'
>>>>        option mode 'sta'
>>>>        option key 'Dlink_Router'
>>>>        option wds '1'
>>>>
>>>> Then  i added one as shown in the video. Now its connected to router
>>>> also
>>>> and this add one also showing so i can connect to this also.
>>>>
>>>> But i am not getting how to keep this in default wireless config.
>>>>
>>>> Because every time we cant add one to configure like this. It should be
>>>> like default should be in ap mode so any device we can connect, if its
>>>> connected to another router also that SSID still should be visible and
>>>> able
>>>> to connect to this.
>>>>
>>>>
>>>
>>>
>>> On Mon, Aug 10, 2015 at 2:57 PM, John kerry <kerry9842 at gmail.com> wrote:
>>>>
>>>> When i try to configure based on video, its shows 2 one as client
>>>> another
>>>>
>>>>> one as Master but i am not able to enable it . I mean to say wireless
>>>>> becomes disable. If i enable it using GUI also its not happening.
>>>>>
>>>>> On Mon, Aug 10, 2015 at 2:55 PM, David Lang <david at lang.hm> wrote:
>>>>>
>>>>> What happens when you try to follow the video?
>>>>>
>>>>>>
>>>>>> Based on your comments, i'm guessing that things don't work when you
>>>>>> try
>>>>>> and configure the second network and have it with a different SSID
>>>>>> than
>>>>>> the
>>>>>> first network that you put in client mode.
>>>>>>
>>>>>> Is this correct?
>>>>>>
>>>>>> David Lang
>>>>>>
>>>>>> On Mon, 10 Aug 2015, John kerry wrote:
>>>>>>
>>>>>> Yes, When i am connecting to Another router its changed to Client
>>>>>> mode.
>>>>>>
>>>>>>
>>>>>>> Can i configure this in repeater mode like its shows in below link:
>>>>>>>
>>>>>>> https://www.youtube.com/watch?v=3rbsh2zxPnk
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>> _______________________________________________
>>> openwrt-devel mailing list
>>> openwrt-devel at lists.openwrt.org
>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>
>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150811/3ae0b867/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel