[OpenWrt-Devel] [PATCH] ar71xx: Add support for Black Swift
Bruno Randolf
br1 at einfach.org
Mon Aug 10 12:18:09 EDT 2015
Add support for the Black Swift board:
http://www.black-swift.com/
Took relevant parts and slightly adapted from:
https://github.com/blackswift/openwrt/blob/master/bsb.patch
Signed-off-by: Bruno Randolf <br1 at einfach.org>
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../ar71xx/base-files/etc/uci-defaults/01_leds | 4 ++
.../ar71xx/base-files/etc/uci-defaults/02_network | 7 ++
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-4.1 | 1 +
.../linux/ar71xx/files/arch/mips/ath79/mach-bsb.c | 83 ++++++++++++++++++++++
.../ar71xx/generic/profiles/smartelectronics.mk | 17 +++++
target/linux/ar71xx/image/Makefile | 8 +++
.../814-MIPS-ath79-add-blackswift.patch | 45 ++++++++++++
10 files changed, 172 insertions(+)
mode change 100755 => 100644 target/linux/ar71xx/base-files/etc/uci-defaults/02_network
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c
create mode 100644 target/linux/ar71xx/generic/profiles/smartelectronics.mk
create mode 100644 target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 561c5da..abb3f62 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -41,6 +41,9 @@ get_status_led() {
aw-nr580)
status_led="aw-nr580:green:ready"
;;
+ bsb)
+ status_led="bsb:red:sys"
+ ;;
bullet-m | rocket-m | rocket-m-xw | nano-m | nanostation-m | nanostation-m-xw | loco-m-xw)
status_led="ubnt:green:link4"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 2aced37..392be3a 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -55,6 +55,10 @@ ap147-010)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
+bsb)
+ ucidef_set_led_default "sys" "SYS" "bsb:red:sys" "1"
+ ;;
+
bullet-m | \
nanostation-m | \
rocket-m | \
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
old mode 100755
new mode 100644
index 2893e62..acaf03f
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -72,6 +72,13 @@ tl-wdr4900-v2)
ucidef_add_switch_vlan "switch0" "2" "1 6"
;;
+bsb)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 1 3"
+ ucidef_set_interface_wlan
+ ;;
+
cpe510)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 256bd10..359a5a6 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -676,6 +676,9 @@ ar71xx_board_detect() {
*"SMART-300")
name="smart-300"
;;
+ "Smart Electronics Black Swift board"*)
+ name="bsb"
+ ;;
*TEW-632BRP)
name="tew-632brp"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 76d8c5b..fb9add6 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -263,6 +263,7 @@ platform_check_image() {
return 1
;;
+ bsb | \
dir-825-b1 | \
tew-673gru)
dir825b_check_image "$1" && return 0
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index 1e31a01..1951cbb 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -47,6 +47,7 @@ CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
+CONFIG_ATH79_MACH_BSB=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_CPE510=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c
new file mode 100644
index 0000000..9f9be02
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c
@@ -0,0 +1,83 @@
+/*
+ * Smart Electronics Black Swift board support
+ *
+ * Copyright (C) 2014 Dmitriy Zherebkov dzh at black-swift.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define BSB_GPIO_LED_SYS 27
+
+#define BSB_GPIO_BTN_RESET 11
+
+#define BSB_KEYS_POLL_INTERVAL 20 /* msecs */
+#define BSB_KEYS_DEBOUNCE_INTERVAL (3 * BSB_KEYS_POLL_INTERVAL)
+
+#define BSB_MAC_OFFSET 0x0000
+#define BSB_CALDATA_OFFSET 0x1000
+
+static struct gpio_led bsb_leds_gpio[] __initdata = {
+ {
+ .name = "bsb:red:sys",
+ .gpio = BSB_GPIO_LED_SYS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button bsb_gpio_keys[] __initdata = {
+ {
+ .desc = "reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BSB_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = BSB_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init bsb_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false,false);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(bsb_leds_gpio),
+ bsb_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, BSB_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(bsb_gpio_keys),
+ bsb_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(NULL);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + BSB_MAC_OFFSET, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + BSB_MAC_OFFSET, 2);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + BSB_CALDATA_OFFSET,
+ art + BSB_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_BSB, "BSB", "Smart Electronics Black Swift board",
+ bsb_setup);
+
diff --git a/target/linux/ar71xx/generic/profiles/smartelectronics.mk b/target/linux/ar71xx/generic/profiles/smartelectronics.mk
new file mode 100644
index 0000000..6d3dc8c
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/smartelectronics.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/BSB
+ NAME:=Smart Electronics Black Swift board
+ PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/BSB/Description
+ Package set optimized for the Smart Electronics Black Swift board.
+endef
+
+$(eval $(call Profile,BSB))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index e894d78..a8d79f7 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -172,6 +172,14 @@ define Device/Default
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
+define Device/bsb
+ BOARDNAME = BSB
+ IMAGE_SIZE = 16000k
+ CONSOLE = ttyATH0,115200
+ MTDPARTS = spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += bsb
+
define Device/carambola2
BOARDNAME = CARAMBOLA2
IMAGE_SIZE = 16000k
diff --git a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch
new file mode 100644
index 0000000..6ec2a8f
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch
@@ -0,0 +1,45 @@
+Index: linux-4.1.4/arch/mips/ath79/Kconfig
+===================================================================
+--- linux-4.1.4.orig/arch/mips/ath79/Kconfig 2015-08-10 16:28:12.409834069 +0100
++++ linux-4.1.4/arch/mips/ath79/Kconfig 2015-08-10 16:30:16.341831945 +0100
+@@ -904,6 +904,16 @@
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
++config ATH79_MACH_BSB
++ bool "Smart Electronics Black Swift board"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_ARCHER_C7
+ bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
+ select SOC_QCA955X
+Index: linux-4.1.4/arch/mips/ath79/Makefile
+===================================================================
+--- linux-4.1.4.orig/arch/mips/ath79/Makefile 2015-08-10 16:28:12.409834069 +0100
++++ linux-4.1.4/arch/mips/ath79/Makefile 2015-08-10 16:30:39.985831540 +0100
+@@ -56,6 +56,7 @@
+ obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
+ obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+ obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
++obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o
+ obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
+ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+Index: linux-4.1.4/arch/mips/ath79/machtypes.h
+===================================================================
+--- linux-4.1.4.orig/arch/mips/ath79/machtypes.h 2015-08-10 16:28:12.409834069 +0100
++++ linux-4.1.4/arch/mips/ath79/machtypes.h 2015-08-10 16:31:13.693830962 +0100
+@@ -39,6 +39,7 @@
+ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
++ ATH79_MACH_BSB, /* Smart Electronics Black Swift board */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
+ ATH79_MACH_CPE510, /* TP-LINK CPE510 */
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list