[OpenWrt-Devel] [PATCH v3] lantiq: get more status information from xDSL

Sylwester Petela sscapi at gmail.com
Thu Aug 6 03:15:39 EDT 2015


W dniu 2015-08-06 o 07:41, feckert pisze:
> Signed-off-by: Florian Eckert <Eckert.Florian at googlemail.com>
> Signed-off-by: Helge Mader <hmader at tdt.de>
> Tested-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> Tested-by: Andre Heider <a.heider at gmail.com>
> ---
>
> v2 fix annex and line mode comma
> v2 fix latency to ms
> v3 fix latency syntax quotation error "x ms"
> v3 fix echo "----" separation removed from status function
>
>   .../lantiq/base-files/lib/functions/lantiq_dsl.sh  |  412 +++++++++++++++++++-
>   1 file changed, 400 insertions(+), 12 deletions(-)
>   mode change 100644 => 100755 target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
>
> diff --git a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
> old mode 100644
> new mode 100755
> index 56b8652..7809d01
> --- a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
> +++ b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
> @@ -19,6 +19,9 @@ dsl_cmd() {
>   dsl_val() {
>   	echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
>   }
> +dsl_string() {
> +	echo $(expr "$1" : '.*'$2'=(\([A-Z0-9,]*\))')
> +}
>   
>   #
>   # Simple divide by 10 routine to cope with one decimal place
> @@ -49,6 +52,16 @@ scale() {
>   	fi
>   }
>   
> +scale_latency() {
> +	local val=$1
> +	local a
> +	local b
> +
> +	a=$(expr $val / 100)
> +	b=$(expr $val % 100)
> +	printf "%d.%d ms" ${a} ${b}
> +}
> +
>   #
>   # Read the data rates for both directions
>   #
> @@ -77,7 +90,7 @@ data_rates() {
>   		echo "dsl.data_rate_down_s=\"$sdrd\""
>   		echo "dsl.data_rate_up_s=\"$sdru\""
>   	else
> -		echo "Data Rate:		${sdrd}/s / ${sdru}/s"
> +		echo "Data Rate:                                Down: ${sdrd}/s / Up: ${sdru}/s"
>   	fi
>   }
>   
> @@ -92,11 +105,340 @@ chipset() {
>   	vig=$(dsl_cmd vig)
>   	cs=$(dsl_val "$vig" DSL_ChipSetType)
>   	csv=$(dsl_val "$vig" DSL_ChipSetHWVersion)
> +	csfw=$(dsl_val "$vig" DSL_ChipSetFWVersion)
> +	csapi=$(dsl_val "$vig" DSL_DriverVersionApi)
>   
>   	if [ "$action" = "lucistat" ]; then
>   		echo "dsl.chipset=\"${cs} ${csv}\""
> +		echo "dsl.firmware_version=\"${csfw}\""
> +		echo "dsl.api_version=\"${csapi}\""
>   	else
> -		echo "Chipset:		${cs} ${csv}"
> +		echo "Chipset:                                  ${cs} ${csv}"
> +		echo "Firmware Version:                         ${csfw}"
> +		echo "API Version:                              ${csapi}"
> +	fi
> +}
> +
> +#
> +# Vendor information
> +#
> +vendor() {
> +	local lig
> +	local vid
> +	local svid
> +
> +	lig=$(dsl_cmd g997lig 1)
> +	vid=$(dsl_string "$lig" G994VendorID)
> +	svid=$(dsl_string "$lig" SystemVendorID)
> +
> +	if [ "$action" = "lucistat" ]; then
> +		echo "dsl.atuc_vendor_id=\"${vid}\""
> +		echo "dsl.atuc_system_vendor_id=\"${svid}\""
> +	else
> +		echo "ATU-C Vendor ID:                          ${vid}"
> +		echo "ATU-C System Vendor ID:                   ${svid}"
> +	fi
> +}
> +
> +#
> +# XTSE capabilities
> +#
> +xtse() {
> +	local xtusesg
> +	local xtse1
> +	local xtse2
> +	local xtse3
> +	local xtse4
> +	local xtse5
> +	local xtse6
> +	local xtse7
> +	local xtse8
> +
> +	local xtse_s=""
> +
> +	local annex_s=""
> +	local line_mode_s=""
> +	local cmd=""
> +
> +	xtusesg=$(dsl_cmd g997xtusesg)
> +	xtse1=$(dsl_val "$xtusesg" XTSE1)
> +	xtse2=$(dsl_val "$xtusesg" XTSE2)
> +	xtse3=$(dsl_val "$xtusesg" XTSE3)
> +	xtse4=$(dsl_val "$xtusesg" XTSE4)
> +	xtse5=$(dsl_val "$xtusesg" XTSE5)
> +	xtse6=$(dsl_val "$xtusesg" XTSE6)
> +	xtse7=$(dsl_val "$xtusesg" XTSE7)
> +	xtse8=$(dsl_val "$xtusesg" XTSE8)
> +
> +	# Evaluate Annex (according to G.997.1, 7.3.1.1.1)
> +	if [ $((xtse1 & 13)) != 0 \
> +	-o $((xtse2 & 1)) != 0 \
> +	-o $((xtse3 & 12)) != 0 \
> +	-o $((xtse4 & 3)) != 0 \
> +	-o $((xtse6 & 3)) != 0 \
> +	-o $((xtse8 & 1)) != 0 ]; then
> +		annex_s=" A,"
> +	fi
> +
> +	if [ $((xtse1 & 48)) != 0 \
> +	-o $((xtse2 & 2)) != 0 \
> +	-o $((xtse3 & 48)) != 0 \
> +	-o $((xtse6 & 12)) != 0 \
> +	-o $((xtse8 & 2)) != 0 ]; then
> +		annex_s="$annex_s B,"
> +	fi
> +
> +	if [ $((xtse1 & 194)) != 0 \
> +	-o $((xtse2 & 12)) != 0 \
> +	-o $((xtse8 & 4)) != 0 ]; then
> +		annex_s="$annex_s C,"
> +	fi
> +
> +	if [ $((xtse4 & 48)) != 0 \
> +	-o $((xtse5 & 3)) != 0 \
> +	-o $((xtse6 & 192)) != 0 ]; then
> +		annex_s="$annex_s I,"
> +	fi
> +
> +	if [ $((xtse4 & 192)) != 0 \
> +	-o $((xtse7 & 3)) != 0 ]; then
> +		annex_s="$annex_s J,"
> +	fi
> +
> +	if [ $((xtse5 & 60)) != 0 ]; then
> +		annex_s="$annex_s L,"
> +	fi
> +
> +	if [ $((xtse5 & 192)) != 0 \
> +	-o $((xtse7 & 12)) != 0 ]; then
> +		annex_s="$annex_s M,"
> +	fi
> +
> +	annex_s=`echo ${annex_s:1}`
> +	annex_s=`echo ${annex_s%?}`
> +
> +	# Evaluate Line Mode (according to G.997.1, 7.3.1.1.1)
> +
> +	# Regional standard: ANSI T1.413
> +	if [ $((xtse1 & 1)) != 0  ]; then
> +		line_mode_s=" T1.413,"
> +	fi
> +
> +	# Regional standard: TS 101 388
> +	if [ $((xtse1 & 1)) != 0  ]; then
> +		line_mode_s="$line_mode_s TS 101 388,"
> +	fi
> +
> +	if [ $((xtse1 & 252)) != 0  ]; then
> +		line_mode_s="$line_mode_s G.992.1 (ADSL),"
> +	fi
> +
> +	if [ $((xtse2 & 15)) != 0  ]; then
> +		line_mode_s="$line_mode_s G.992.2 (ADSL lite),"
> +	fi
> +
> +	if [ $((xtse3 & 60)) != 0 \
> +	-o $((xtse4 & 240)) != 0 \
> +	-o $((xtse5 & 252)) != 0  ]; then
> +		line_mode_s="$line_mode_s G.992.3 (ADSL2),"
> +	fi
> +
> +	if [ $((xtse4 & 3)) != 0 \
> +	-o $((xtse5 & 3)) != 0  ]; then
> +		line_mode_s="$line_mode_s G.992.4 (ADSL2 lite),"
> +	fi
> +
> +	if [ $((xtse6 & 199)) != 0 \
> +	-o $((xtse7 & 15)) != 0  ]; then
> +		line_mode_s="$line_mode_s G.992.5 (ADSL2+),"
> +	fi
> +
> +	if [ $((xtse8 & 7)) != 0  ]; then
> +		line_mode_s="$line_mode_s G.993.2 (VDSL2),"
> +	fi
> +
> +	#!!! PROPRIETARY & INTERMEDIATE USE !!!
> +	if [ $((xtse8 & 128)) != 0  ]; then
> +		line_mode_s="$line_mode_s G.993.1 (VDSL),"
> +	fi
> +
> +	line_mode_s=`echo ${line_mode_s:1}`
> +	line_mode_s=`echo ${line_mode_s%?}`
> +
> +	xtse_s="${xtse1}, ${xtse2}, ${xtse3}, ${xtse4}, ${xtse5}, ${xtse6}, ${xtse7}, ${xtse8}"
> +
> +	if [ "$action" = "lucistat" ]; then
> +		echo "dsl.xtse1=$xtse1"
> +		echo "dsl.xtse2=$xtse2"
> +		echo "dsl.xtse3=$xtse3"
> +		echo "dsl.xtse4=$xtse4"
> +		echo "dsl.xtse5=$xtse5"
> +		echo "dsl.xtse6=$xtse6"
> +		echo "dsl.xtse7=$xtse7"
> +		echo "dsl.xtse8=$xtse8"
> +		echo "dsl.xtse_s=\"$xtse_s\""
> +		echo "dsl.annex_s=\"${annex_s}\""
> +		echo "dsl.line_mode_s=\"${line_mode_s}\""
> +	else
> +		echo "XTSE Capabilities:                        ${xtse_s}"
> +		echo "Annex:                                    ${annex_s}"
> +		echo "Line Mode:                                ${line_mode_s}"
> +	fi
> +}
> +
> +#
> +# Power Management Mode
> +#
> +power_mode() {
> +	local pmsg=$(dsl_cmd g997pmsg)
> +	local pm=$(dsl_val "$pmsg" nPowerManagementStatus);
> +	local s;
> +
> +	case "$pm" in
> +		"-1")		s="Power management state is not available" ;;
> +		"0")		s="L0 - Synchronized" ;;
> +		"1")		s="L1 - Power Down Data transmission (G.992.2)" ;;
> +		"2")		s="L2 - Power Down Data transmission (G.992.3 and G.992.4)" ;;
> +		"3")		s="L3 - No power" ;;
> +		*)		s="unknown" ;;
> +	esac
> +
> +	if [ "$action" = "lucistat" ]; then
> +		echo "dsl.power_mode_num=$pm"
> +		echo "dsl.power_mode_s=\"$s\""
> +	else
> +		echo "Power Management Mode:                    $s"
> +	fi
> +}
> +
> +#
> +# Latency type (interleave delay)
> +#
> +latency_delay() {
> +	local csg
> +
> +	local idu
> +	local idu_s;
> +	local sidu
> +
> +	local idd
> +	local idd_s;
> +	local sidd
> +
> +	csg=$(dsl_cmd g997csg 0 1)
> +	idd=$(dsl_val "$csg" ActualInterleaveDelay)
> +
> +	csg=$(dsl_cmd g997csg 0 0)
> +	idu=$(dsl_val "$csg" ActualInterleaveDelay)
> +
> +	[ -z "$idd" ] && idd=0
> +	[ -z "$idu" ] && idu=0
> +
> +	if [ "$idd" > 100 ]; then
> +		idd_s="Interleave"
> +	else
> +		idd_s="Fast"
> +	fi
> +
> +	if [ "$idu" > 100 ]; then
> +		idu_s="Interleave"
> +	else
> +		idu_s="Fast"
> +	fi
> +
> +	sidu=$(scale_latency $idu)
> +	sidd=$(scale_latency $idd)
> +
> +	if [ "$action" = "lucistat" ]; then
> +		echo "dsl.latency_num_down=\"$sidu\""
> +		echo "dsl.latency_num_up=\"$sidd\""
> +		echo "dsl.latency_s_down=\"$idd_s\""
> +		echo "dsl.latency_s_up=\"$idu_s\""
> +	else
> +		echo "Latency / Interleave Delay:               Down: ${idd_s} (${sidd}) / Up: ${idu_s} (${sidu})"
> +	fi
> +}
> +
> +#
> +# Errors
> +#
> +errors() {
> +	local lsctg
> +	local dpctg
> +	local ccsg
> +	local esf
> +	local esn
> +	local sesf
> +	local sesn
> +	local lossf
> +	local lossn
> +	local uasf
> +	local uasn
> +
> +	local crc_pf
> +	local crc_pn
> +	local crcp_pf
> +	local crcp_pn
> +	local hecf
> +	local hecn
> +
> +	local fecn
> +	local fecf
> +
> +	lsctg=$(dsl_cmd pmlsctg 1)
> +	esf=$(dsl_val "$lsctg" nES)
> +	sesf=$(dsl_val "$lsctg" nSES)
> +	lossf=$(dsl_val "$lsctg" nLOSS)
> +	uasf=$(dsl_val "$lsctg" nUAS)
> +
> +	lsctg=$(dsl_cmd pmlsctg 0)
> +	esn=$(dsl_val "$lsctg" nES)
> +	sesn=$(dsl_val "$lsctg" nSES)
> +	lossn=$(dsl_val "$lsctg" nLOSS)
> +	uasn=$(dsl_val "$lsctg" nUAS)
> +
> +	dpctg=$(dsl_cmd pmdpctg 0 1)
> +	hecf=$(dsl_val "$dpctg" nHEC)
> +	crc_pf=$(dsl_val "$dpctg" nCRC_P)
> +	crcp_pf=$(dsl_val "$dpctg" nCRCP_P)
> +
> +	dpctg=$(dsl_cmd pmdpctg 0 0)
> +	hecn=$(dsl_val "$dpctg" nHEC)
> +	crc_pn=$(dsl_val "$dpctg" nCRC_P)
> +	crcp_pn=$(dsl_val "$dpctg" nCRCP_P)
> +
> +	ccsg=$(dsl_cmd pmccsg 0 1 0)
> +	fecf=$(dsl_val "$ccsg" nFEC)
> +
> +	ccsg=$(dsl_cmd pmccsg 0 0 0)
> +	fecn=$(dsl_val "$ccsg" nFEC)
> +
> +	if [ "$action" = "lucistat" ]; then
> +		echo "dsl.errors_fec_near=$fecn"
> +		echo "dsl.errors_fec_far=$fecf"
> +		echo "dsl.errors_es_near=$esn"
> +		echo "dsl.errors_es_far=$esf"
> +		echo "dsl.errors_ses_near=$sesn"
> +		echo "dsl.errors_ses_far=$sesf"
> +		echo "dsl.errors_loss_near=$lossn"
> +		echo "dsl.errors_loss_far=$lossf"
> +		echo "dsl.errors_uas_near=$uasn"
> +		echo "dsl.errors_uas_far=$uasf"
> +		echo "dsl.errors_hec_near=$hecn"
> +		echo "dsl.errors_hec_far=$hecf"
> +		echo "dsl.errors_crc_p_near=$crc_pn"
> +		echo "dsl.errors_crc_p_far=$crc_pf"
> +		echo "dsl.errors_crcp_p_near=$crcp_pn"
> +		echo "dsl.errors_crcp_p_far=$crcp_pf"
> +	else
> +		echo "Forward Error Correction Seconds (FECS):  Near: ${fecn} / Far: ${fecf}"
> +		echo "Errored seconds (ES):                     Near: ${esn} / Far: ${esf}"
> +		echo "Severely Errored Seconds (SES):           Near: ${sesn} / Far: ${sesf}"
> +		echo "Loss of Signal Seconds (LOSS):            Near: ${lossn} / Far: ${lossf}"
> +		echo "Unavailable Seconds (UAS):                Near: ${uasn} / Far: ${uasf}"
> +		echo "Header Error Code Errors (HEC):           Near: ${hecn} / Far: ${hecf}"
> +		echo "Non Pre-emtive CRC errors (CRC_P):        Near: ${crcp_pn} / Far: ${crcp_pf}"
> +		echo "Pre-emtive CRC errors (CRCP_P):           Near: ${crcp_pn} / Far: ${crcp_pf}"
>   	fi
>   }
>   
> @@ -118,11 +460,6 @@ line_uptime() {
>   
>   	[ -z "$et" ] && et=0
>   
> -	if [ "$action" = "lucistat" ]; then
> -		echo "dsl.line_uptime=${et}"
> -		return
> -	fi
> -
>   	d=$(expr $et / 86400)
>   	etr=$(expr $et % 86400)
>   	h=$(expr $etr / 3600)
> @@ -137,7 +474,16 @@ line_uptime() {
>   	[ "${d}" -ne 0 ] && rc="${d}d ${rc}"
>   
>   	[ -z "$rc" ] && rc="down"
> -	echo "Line Uptime:		${rc}"
> +
> +
> +	if [ "$action" = "lucistat" ]; then
> +		echo "dsl.line_uptime=${et}"
> +		echo "dsl.line_uptime_s=\"${rc}\""
> +	else
> +
> +		echo "Line Uptime Seconds:                      ${et}"
> +		echo "Line Uptime:                              ${rc}"
> +	fi
>   }
>   
>   #
> @@ -147,35 +493,72 @@ line_data() {
>   	local lsg
>   	local latnu
>   	local latnd
> +	local satnu
> +	local satnd
>   	local snru
>   	local snrd
> +	local attndru
> +	local attndrd
> +	local sattndru
> +	local sattndrd
> +	local actatpu
> +	local actatpd
>   
>   	lsg=$(dsl_cmd g997lsg 1 1)
>   	latnd=$(dsl_val "$lsg" LATN)
> +	satnd=$(dsl_val "$lsg" SATN)
>   	snrd=$(dsl_val "$lsg" SNR)
> +	attndrd=$(dsl_val "$lsg" ATTNDR)
> +	actatpd=$(dsl_val "$lsg" ACTATP)
>   
>   	lsg=$(dsl_cmd g997lsg 0 1)
>   	latnu=$(dsl_val "$lsg" LATN)
> +	satnu=$(dsl_val "$lsg" SATN)
>   	snru=$(dsl_val "$lsg" SNR)
> +	attndru=$(dsl_val "$lsg" ATTNDR)
> +	actatpu=$(dsl_val "$lsg" ACTATP)
>   
>   	[ -z "$latnd" ] && latnd=0
>   	[ -z "$latnu" ] && latnu=0
> +	[ -z "$satnd" ] && satnd=0
> +	[ -z "$satnu" ] && satnu=0
>   	[ -z "$snrd" ] && snrd=0
>   	[ -z "$snru" ] && snru=0
>   
>   	latnd=$(dbt $latnd)
>   	latnu=$(dbt $latnu)
> +	satnd=$(dbt $satnd)
> +	satnu=$(dbt $satnu)
>   	snrd=$(dbt $snrd)
>   	snru=$(dbt $snru)
> +	actatpd=$(dbt $actatpd)
> +	actatpu=$(dbt $actatpu)
> +
> +	[ -z "$attndrd" ] && attndrd=0
> +	[ -z "$attndru" ] && attndru=0
> +
> +	sattndrd=$(scale $attndrd)
> +	sattndru=$(scale $attndru)
>   	
>   	if [ "$action" = "lucistat" ]; then
>   		echo "dsl.line_attenuation_down=$latnd"
>   		echo "dsl.line_attenuation_up=$latnu"
>   		echo "dsl.noise_margin_down=$snrd"
>   		echo "dsl.noise_margin_up=$snru"
> +		echo "dsl.signal_attenuation_down=$satnd"
> +		echo "dsl.signal_attenuation_up=$satnu"
> +		echo "dsl.actatp_down=$actatpd"
> +		echo "dsl.actatp_up=$actatpu"
> +		echo "dsl.max_data_rate_down=$attndrd"
> +		echo "dsl.max_data_rate_up=$attndru"
> +		echo "dsl.max_data_rate_down_s=\"$sattndrd\""
> +		echo "dsl.max_data_rate_up_s=\"$sattndru\""
>   	else
> -		echo "Line Attenuation:	${latnd}dB / ${latnu}dB"
> -		echo "Noise Margin:		${snrd}dB / ${snru}dB"
> +		echo "Line Attenuation (LATN):                  Down: ${latnd}dB / Up: ${latnu}dB"
> +		echo "Signal Attenuation (SATN):                Down: ${satnd}dB / Up: ${satnu}dB"
> +		echo "Noise Margin (SNR):                       Down: ${snrd}dB / Up: ${snru}dB"
> +		echo "Aggregate Transmit Power(ACTATP):         Down: ${actatpd}dB / Up: ${actatpu}dB"
> +		echo "Max. Attainable Data Rate (ATTNDR):       Down: ${sattndrd}/s / Up: ${sattndru}/s"
>   	fi
>   }
>   
> @@ -226,16 +609,21 @@ line_state() {
>   		fi
>   	else
>   		if [ "$ls" = "0x801" ]; then
> -			echo "Line State:		UP [$ls: $s]"
> +			echo "Line State:                               UP [$ls: $s]"
>   		else
> -			echo "Line State:		DOWN [$ls: $s]"
> +			echo "Line State:                               DOWN [$ls: $s]"
>   		fi
>   	fi
>   }

Above change intrigues me a lot.
Is this patch intended whitespace broken or by mistake every "tab is 
converted into "space"?

>   
>   status() {
> +	vendor
>   	chipset
> +	xtse
>   	line_state
> +	errors
> +	power_mode
> +	latency_delay
>   	data_rates
>   	line_data
>   	line_uptime
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list