[OpenWrt-Devel] [PATCH] ar71xx: fix TP-LINK TL-WR941ND v6 support
Matthias Schiffer
mschiffer at universe-factory.net
Wed Aug 5 20:40:55 EDT 2015
The images currently generated for the TL-WR941ND v6 try to treat it like
a TL-WDR3500, which doesn't make any sense and causes the kernel to panic
in early boot. I don't think this has ever worked (the TL-WR941ND v6 has
a different SoC, uses another MDIO bus, has only one WMAC and no USB...).
Fix this by adding proper support for the device.
Signed-off-by: Matthias Schiffer <mschiffer at universe-factory.net>
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
.../ar71xx/base-files/etc/uci-defaults/01_leds | 9 ++
.../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-4.1 | 1 +
.../files/arch/mips/ath79/mach-tl-wr941nd-v6.c | 151 +++++++++++++++++++++
target/linux/ar71xx/image/Makefile | 2 +-
.../700-MIPS-ath79-openwrt-machines.patch | 23 +++-
9 files changed, 186 insertions(+), 8 deletions(-)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 561c5da..46b83fc 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -277,7 +277,8 @@ get_status_led() {
tl-wdr4300 | \
tl-wr703n | \
tl-wr710n | \
- tl-wr720n-v3)
+ tl-wr720n-v3 | \
+ tl-wr941nd-v6)
status_led="tp-link:blue:system"
;;
tl-wr841n-v9)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 2aced37..3344d97 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -474,6 +474,15 @@ tl-wr941nd-v5)
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
+tl-wr941nd-v6)
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:blue:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "tp-link:blue:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "tp-link:blue:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "tp-link:blue:lan4" "switch0" "0x02"
+ ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
+ ;;
+
tl-wa830re-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 2893e62..a6507db 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -227,6 +227,7 @@ tl-mr3420-v2 |\
tl-wr841n-v8 |\
tl-wr842n-v2 |\
tl-wr941nd-v5 |\
+tl-wr941nd-v6 |\
wnr2000-v3 |\
wnr2000-v4 |\
wnr2200 |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 256bd10..5d27538 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -793,6 +793,9 @@ ar71xx_board_detect() {
*"TL-WR941N/ND v5")
name="tl-wr941nd-v5"
;;
+ *"TL-WR941N/ND v6")
+ name="tl-wr941nd-v6"
+ ;;
*"TL-WR703N v1")
name="tl-wr703n"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 76d8c5b..55ff568 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -353,6 +353,7 @@ platform_check_image() {
tl-wr842n-v2 | \
tl-wr941nd | \
tl-wr941nd-v5 | \
+ tl-wr941nd-v6 | \
tl-wr1041n-v2 | \
tl-wr1043nd | \
tl-wr1043nd-v2 | \
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index 1e31a01..ecaf454 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -134,6 +134,7 @@ CONFIG_ATH79_MACH_TL_WR841N_V1=y
CONFIG_ATH79_MACH_TL_WR841N_V8=y
CONFIG_ATH79_MACH_TL_WR841N_V9=y
CONFIG_ATH79_MACH_TL_WR941ND=y
+CONFIG_ATH79_MACH_TL_WR941ND_V6=y
CONFIG_ATH79_MACH_TUBE2H=y
CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_XM=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c
new file mode 100644
index 0000000..c5fc9fc
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c
@@ -0,0 +1,151 @@
+/*
+ * TP-LINK TL-WR941N/ND v6 board support
+ *
+ * Copyright (C) 2015 Matthias Schiffer <mschiffer at universe-factory.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define TL_WR941ND_V6_GPIO_LED_QSS 3
+#define TL_WR941ND_V6_GPIO_LED_WAN 14
+#define TL_WR941ND_V6_GPIO_LED_WAN_RED 15
+#define TL_WR941ND_V6_GPIO_LED_LAN1 7
+#define TL_WR941ND_V6_GPIO_LED_LAN2 6
+#define TL_WR941ND_V6_GPIO_LED_LAN3 5
+#define TL_WR941ND_V6_GPIO_LED_LAN4 4
+#define TL_WR941ND_V6_GPIO_LED_WLAN 8
+#define TL_WR941ND_V6_GPIO_LED_SYSTEM 18
+
+#define TL_WR941ND_V6_GPIO_BTN_RESET 1
+#define TL_WR941ND_V6_GPIO_BTN_RFKILL 2
+
+#define TL_WR941ND_V6_KEYS_POLL_INTERVAL 20
+#define TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_V6_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led tl_wr941nd_v6_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:qss",
+ .gpio = TL_WR941ND_V6_GPIO_LED_QSS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:wan",
+ .gpio = TL_WR941ND_V6_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:red:wan",
+ .gpio = TL_WR941ND_V6_GPIO_LED_WAN_RED,
+ .active_low = 0,
+ },
+ {
+ .name = "tp-link:blue:lan1",
+ .gpio = TL_WR941ND_V6_GPIO_LED_LAN1,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:lan2",
+ .gpio = TL_WR941ND_V6_GPIO_LED_LAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:lan3",
+ .gpio = TL_WR941ND_V6_GPIO_LED_LAN3,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:lan4",
+ .gpio = TL_WR941ND_V6_GPIO_LED_LAN4,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:wlan",
+ .gpio = TL_WR941ND_V6_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:blue:system",
+ .gpio = TL_WR941ND_V6_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr941nd_v6_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR941ND_V6_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR941ND_V6_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ }
+};
+
+
+static const char *tl_wr941n_v6_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr941n_v6_flash_data = {
+ .part_probes = tl_wr941n_v6_part_probes,
+};
+
+
+static void __init tl_wr941nd_v6_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr941n_v6_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_v6_leds_gpio),
+ tl_wr941nd_v6_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR941ND_V6_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr941nd_v6_gpio_keys),
+ tl_wr941nd_v6_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(0);
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR941ND_V6, "TL-WR941ND-v6", "TP-LINK TL-WR941N/ND v6",
+ tl_wr941nd_v6_setup);
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index e894d78..f9e0087 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -620,7 +620,7 @@ endef
define Device/tl-wr941nd-v6
$(Device/tplink-4mlzma)
- BOARDNAME := TL-WDR3500
+ BOARDNAME := TL-WR941ND-v6
DEVICE_PROFILE := TLWR941
TPLINK_HWID := 0x09410006
endef
diff --git a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
index 02ebd1b..558d43c 100644
--- a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,24 +16,207 @@
+@@ -16,24 +16,208 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -157,6 +157,7 @@
+ ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
+ ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */
++ ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */
+ ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */
+ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
@@ -301,7 +302,7 @@
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -11,62 +95,1107 @@ config ATH79_MACH_AP121
+@@ -11,62 +95,1116 @@ config ATH79_MACH_AP121
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
@@ -1342,6 +1343,15 @@
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_TL_WR941ND_V6
++ bool "TP-LINK TL-WR941ND v6 support"
++ select SOC_QCA956X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_TL_WR1041N_V2
+ bool "TP-LINK TL-WR1041N v2 support"
+ select SOC_AR934X
@@ -1437,7 +1447,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1212,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1221,97 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@@ -1535,7 +1545,7 @@
endmenu
config SOC_AR71XX
-@@ -134,7 +1354,10 @@ config ATH79_DEV_DSA
+@@ -134,7 +1363,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@@ -1547,7 +1557,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -164,6 +1387,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,6 +1396,11 @@ config ATH79_PCI_ATH9K_FIXUP
def_bool n
config ATH79_ROUTERBOOT
@@ -1561,7 +1571,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,133 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,134 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@@ -1661,6 +1671,7 @@
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o
+obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o
--
2.5.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list