[OpenWrt-Devel] [PATCH 2/4] ipq806x: add support for non-dt enabled ap148 bootloader

Mathieu Olivari mathieu at codeaurora.org
Tue Aug 4 17:55:30 EDT 2015


Certain AP148 platforms (and derivative) use bootloaders which did not
have DT enabled.
In order to support these old platforms, we'll now make the following
modifications:
*explicitely add the memory node in the AP148 DT: this used to be added
 by new u-boot through a run-time patch mechanism. We'll now add it
 explicitely so it works on boots which don't support that feature. New
 boots will have the node twice, the second one will be ignored.
*add the zImage generation next to the FIT image for AP148.

Other platforms using non-DT enabled bootloaders may want to leverage
this zImage code to generate their own firmare as well.

Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
---
 target/linux/ipq806x/image/Makefile                        | 10 ++++++++++
 .../ipq806x/patches-3.18/024-ap148-add-memory-node.patch   | 14 ++++++++++++++
 .../ipq806x/patches-4.1/024-ap148-add-memory-node.patch    | 14 ++++++++++++++
 ...-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch |  4 ++--
 ...-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch |  4 ++--
 .../707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch   |  6 +++---
 ...-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch |  4 ++--
 7 files changed, 47 insertions(+), 9 deletions(-)
 create mode 100644 target/linux/ipq806x/patches-3.18/024-ap148-add-memory-node.patch
 create mode 100644 target/linux/ipq806x/patches-4.1/024-ap148-add-memory-node.patch

diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index 9a1bad8..99e9811 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -8,6 +8,15 @@ UBINIZE_OPTS = -m 2048 -p 128KiB
 
 E2SIZE=$(shell echo $$(($(CONFIG_TARGET_ROOTFS_PARTSIZE)*1024)))
 
+define Image/BuildKernel/zImage
+	cat $(KDIR)/zImage $(LINUX_DIR)/arch/arm/boot/dts/$(1).dtb > $(KDIR)/zImage-$(1)
+	$(CP) $(KDIR)/zImage-$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(1)-zImage
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+	cat $(KDIR)/zImage-initramfs $(LINUX_DIR)/arch/arm/boot/dts/$(1).dtb > $(KDIR)/zImage-initramfs-$(1)
+	$(CP) $(KDIR)/zImage-initramfs-$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(1)-zImage-initramfs
+endif
+endef
+
 define Image/BuildKernel/FIT
 	gzip -9n -c $(KDIR)/Image > $(KDIR)/Image.gz
 	$(call CompressLzma,$(KDIR)/Image,$(KDIR)/Image.gz)
@@ -26,6 +35,7 @@ endef
 define Image/BuildKernel
 	$(CP) $(KDIR)/$(IMG_PREFIX)-vmlinux.elf $(BIN_DIR)
 	$(call Image/BuildKernel/FIT,qcom-ipq8064-ap148)
+	$(call Image/BuildKernel/zImage,qcom-ipq8064-ap148)
 	$(call Image/BuildKernel/FIT,qcom-ipq8064-db149)
 endef
 
diff --git a/target/linux/ipq806x/patches-3.18/024-ap148-add-memory-node.patch b/target/linux/ipq806x/patches-3.18/024-ap148-add-memory-node.patch
new file mode 100644
index 0000000..f026ed9
--- /dev/null
+++ b/target/linux/ipq806x/patches-3.18/024-ap148-add-memory-node.patch
@@ -0,0 +1,14 @@
+--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+@@ -4,6 +4,11 @@
+ 	model = "Qualcomm IPQ8064/AP148";
+ 	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+ 
++	memory at 0 {
++		reg = <0x42000000 0x1e000000>;
++		device_type = "memory";
++	};
++
+ 	reserved-memory {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
diff --git a/target/linux/ipq806x/patches-4.1/024-ap148-add-memory-node.patch b/target/linux/ipq806x/patches-4.1/024-ap148-add-memory-node.patch
new file mode 100644
index 0000000..f026ed9
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.1/024-ap148-add-memory-node.patch
@@ -0,0 +1,14 @@
+--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+@@ -4,6 +4,11 @@
+ 	model = "Qualcomm IPQ8064/AP148";
+ 	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+ 
++	memory at 0 {
++		reg = <0x42000000 0x1e000000>;
++		device_type = "memory";
++	};
++
+ 	reserved-memory {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
diff --git a/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
index e7de2bb..e494d32 100644
--- a/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
+++ b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
@@ -15,7 +15,7 @@ Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
 
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -30,6 +30,22 @@
+@@ -35,6 +35,22 @@
  				bias-disable;
  			};
  
@@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
  			spi_pins: spi_pins {
  				mux {
  					pins = "gpio18", "gpio19", "gpio21";
-@@ -109,5 +125,19 @@
+@@ -114,5 +130,19 @@
  		sata at 29000000 {
  			status = "ok";
  		};
diff --git a/target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch b/target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
index 46feec3..9435de6 100644
--- a/target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
+++ b/target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
@@ -37,7 +37,7 @@
  		};
  	};
  
-@@ -195,6 +213,46 @@
+@@ -72,6 +90,46 @@
  		};
  	};
  
@@ -84,7 +84,7 @@
  	soc: soc {
  		#address-cells = <1>;
  		#size-cells = <1>;
-@@ -310,11 +368,13 @@
+@@ -187,11 +245,13 @@
  		acc0: clock-controller at 2088000 {
  			compatible = "qcom,kpss-acc-v1";
  			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
diff --git a/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
index 20d8502..846f738 100644
--- a/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
+++ b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
@@ -11,7 +11,7 @@ Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
 
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -14,8 +14,9 @@
+@@ -19,8 +19,9 @@
  		};
  	};
  
@@ -22,7 +22,7 @@ Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
  	};
  
  	chosen {
-@@ -54,6 +55,15 @@
+@@ -59,6 +60,15 @@
  					bias-none;
  				};
  			};
@@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
  		};
  
  		gsbi at 16300000 {
-@@ -139,5 +149,33 @@
+@@ -144,5 +154,33 @@
  			pinctrl-0 = <&pcie2_pins>;
  			pinctrl-names = "default";
  		};
diff --git a/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
index de68678..8019713 100644
--- a/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
+++ b/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
@@ -12,7 +12,7 @@ Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
 
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -64,6 +64,16 @@
+@@ -69,6 +69,16 @@
  					bias-disable;
  				};
  			};
@@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
  		};
  
  		gsbi at 16300000 {
-@@ -177,5 +187,26 @@
+@@ -182,5 +192,26 @@
  				reg = <4>;
  			};
  		};
-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list