[OpenWrt-Devel] Change OpenWrt Wifi default settings
David Lang
david at lang.hm
Mon Aug 3 23:56:28 EDT 2015
can you connect via a wired port?
given that you've been changing /etc/config/network and /etc/config/wireless,
could you show us what you ended up with there?
David Lang
On Tue, 4 Aug 2015, John kerry wrote:
> Hi,
>
> I am using ar71xx OpenWrt. I have connected internet connection to WAN port
> and my PC to LAN. I have enabled the WiFi0. The LAN port static IP i am
> able to open GUI and even my mobile i connected to Wifi AP and able to open
> GUI in mobile. But I am not able to access internet on mobile which is
> connected to wifi0 AP.
>
> I have added below script under /etc/firewall.user file.
> iptables ...flush
> iptables --table nat --flush
> iptables --delete-chain
> iptables --table nat --delete-chain
> iptables -A FORWARD -j ACCEPT -i br-lan -o eth0.2 -m state --state NEW
> iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
> iptables -A POSTROUTING -t nat -o eth0.2 -j MASQUERADE
> echo 1 > /proc/sys/net/ipv4/ip_forward
>
> #where br-lan = LAN
> eth0.2 = WAN
>
> Could anyone help me to write the proper NAT rules so that able to access
> the internet.
>
> Thanks,
>
> On Mon, Aug 3, 2015 at 11:29 AM, John kerry <kerry9842 at gmail.com> wrote:
>
>> Hello Guys,
>>
>> It's working. Thanks a lot to all of you :)
>>
>> On Mon, Aug 3, 2015 at 10:43 AM, David Lang <david at lang.hm> wrote:
>>
>>> The way to do this is to first forget about the factory reset problem and
>>> configure the AP to do what you want (including any encryption)
>>>
>>> then you can take the resulting file and put it into the build system so
>>> that it becomes the 'factory default' settings.
>>>
>>> Since you are not understanding how to configure the files from the
>>> documentation, configure them from the GUI and then look at the resulting
>>> files.
>>>
>>> David Lang
>>>
>>>
>>> On Mon, 3 Aug 2015, John kerry wrote:
>>>
>>> Hi All,
>>>>
>>>> I created separate files directory and added network and wireless files
>>>> and
>>>> its working everything but still i am not able to use encryption wpa2.
>>>> Below is the my script.
>>>> config wifi-device wifi0
>>>> option type qcawifi
>>>> option channel auto
>>>> option macaddr 00:03:7f:42:06:61
>>>> option hwmode 11ng
>>>> # REMOVE THIS LINE TO ENABLE WIFI:
>>>> option disabled 0
>>>>
>>>> config wifi-iface
>>>> option device wifi0
>>>> option network lan
>>>> option mode ap
>>>> option ssid CD-1
>>>> option encryption psk2
>>>> option key CD-1
>>>>
>>>> M I doing anything wrong?
>>>>
>>>> Thanks,
>>>>
>>>> On Mon, Aug 3, 2015 at 6:40 AM, David Lang <david at lang.hm> wrote:
>>>>
>>>> to make the config be there after a factory reset, you need to put the
>>>>> changes into the image that you build.
>>>>>
>>>>> you already did this for /etc/config/network, do the same thing for
>>>>> /etc/config/wireless
>>>>>
>>>>> David Lang
>>>>>
>>>>>
>>>>> On Sun, 2 Aug 2015, John kerry wrote:
>>>>>
>>>>> Hi Leiten,
>>>>>
>>>>>>
>>>>>> I have one issue, after upgrading this firmware it will load wireless
>>>>>> configuration with this changes, actually it should load when i do
>>>>>> factory
>>>>>> reset.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> On Sun, Aug 2, 2015 at 3:45 PM, John kerry <kerry9842 at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>> Hi Leiten,
>>>>>>
>>>>>>>
>>>>>>> Thank you so much, Its working :)
>>>>>>>
>>>>>>> On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <nickleiten at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>>>
>>>>>>>> Don't answer to my e-mail only, you need to add openwrt-devel
>>>>>>>> maillist
>>>>>>>> to
>>>>>>>> CC or just answer to CC, in each case I'll receive message but also
>>>>>>>> everyone could see all discussion.
>>>>>>>>
>>>>>>>> In email dated Воскресенье - 02 августа 2015 12:54:32 user John kerry
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Hi Leiten,
>>>>>>>>>
>>>>>>>>> I have added new files under and written below :
>>>>>>>>> vi target/linux/ar71xx/base-files/etc/uci-defaults/wireless
>>>>>>>>>
>>>>>>>>>
>>>>>>>> Use index in prefix of filename to set order of execution, so it'll
>>>>>>>> be
>>>>>>>> like '99-wireless'.
>>>>>>>>
>>>>>>>>
>>>>>>>> #!/bin/sh
>>>>>>>>> #
>>>>>>>>> # Copyright (c) 2013 The Linux Foundation. All rights reserved.
>>>>>>>>> # Copyright (C) 2011 OpenWrt.org
>>>>>>>>> #
>>>>>>>>>
>>>>>>>>> [ -e /etc/config/wireless ] && exit 0
>>>>>>>>>
>>>>>>>>>
>>>>>>>> Here is the problem. When uci-defaults invoke scripts there's already
>>>>>>>> preconfiguration done and /etc/config/wireless already exists, so
>>>>>>>> your
>>>>>>>> script just exit at this point. Remove this line.
>>>>>>>>
>>>>>>>>
>>>>>>>> touch /etc/config/wireless
>>>>>>>>>
>>>>>>>>> uci set wireless. at wifi-device[0].disabled=0;
>>>>>>>>> uci set system. at system[0].hostname=test_ap
>>>>>>>>> uci set wireless. at wifi-iface[0].mode=ap
>>>>>>>>> uci set wireless. at wifi-iface[0].ssid=CD-2.4D
>>>>>>>>> uci set wireless. at wifi-iface[0].encryption=none
>>>>>>>>> uci set wireless. at wifi-iface[0].wds=1
>>>>>>>>> uci set wireless.radio0.disabled=0
>>>>>>>>>
>>>>>>>>> uci commit wireless
>>>>>>>>>
>>>>>>>>> exit 0
>>>>>>>>>
>>>>>>>>> and compile the source code using make V=s but still not changed
>>>>>>>>> default
>>>>>>>>> settings.
>>>>>>>>>
>>>>>>>>> Please help me to make it works.
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <nickleiten at gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>> You can also use uci-defaults mechanism for your purpose. Just put
>>>>>>>>>
>>>>>>>>>> script in base-files/etc/uci-defaults and set your preferrable
>>>>>>>>>> parameters with uci and don't forget to 'exit 0' at the end of
>>>>>>>>>> script,
>>>>>>>>>> in elsecase it'll be run every time at boot ruining changes.
>>>>>>>>>>
>>>>>>>>>> 2015-07-31 12:08 GMT+03:00 John kerry <kerry9842 at gmail.com>:
>>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> I am working on Ar71xx openWRT Luci project. By default the Wi-Fi
>>>>>>>>>>> is
>>>>>>>>>>> disabled and SSID is OpenWrt. I need to change the default
>>>>>>>>>>> settings.
>>>>>>>>>>> Could anyone help me to change the default settings.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Best Regards,
>>>>>>>>>>> John
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>
>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>>
>>>>>>>>> openwrt-devel mailing list
>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>
>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list